PIC16F1575-I/P - 8-Bit 32MHz 14KB Flash MCU with 16-bit PWM | Microchip
MPN: PIC16F1575-I/P ✓ সক্রিয়PIC16F1575-I/P সারাংশ
An 8-bit MCU is a microcontroller whose CPU and peripherals operate on an 8-bit data bus. The PIC16 family sits at the bottom of the Microchip MCU hierarchy: 8-bit MCU -> PIC16 core -> microcontroller -> embedded semiconductor. Microcontrollers integrate a CPU core, program memory, data memory, timers, analog converters and communication peripherals into one package, so a single device can replace a discrete CPU plus surrounding glue logic.
The PIC16F1575 belongs to the PIC16(L)F157X family, which the manufacturer describes as combining 16-bit PWM capability with analog peripherals. Four independent 16-bit PWM channels with dedicated timers deliver high resolution duty-cycle control, which is why this family targets LED lighting drivers, general illumination and motor control. A 5-bit DAC provides a simple analog output for set-point or bias generation, and the 10-bit ADC handles sensor acquisition with 1024 discrete steps.
Key features include 32 MHz operation from an internal 8 MHz oscillator with a 4x PLL, programmable brown-out detection, a 16-level deep sleep capability, and multiple serial peripherals such as UART, SPI and I2C with automatic peripheral pin-select. Flash program memory supports In-Circuit Serial Programming (ICSP) and the device can be configured through the Microchip MPLAB X toolchain and PICkit debuggers.
Typical applications include multi-channel LED dimming and RGB colour mixing, fan and small-motor speed control, industrial sensor conditioning, and cost-sensitive consumer products such as lighting ballasts, appliance controls and battery chargers.
A key design consideration is pin multiplexing: on this 14-pin device several I/O pins are shared with the analog inputs, comparators, PWM outputs and the MCLR function, so the pin-assignment table in the manufacturer datasheet must be reviewed before the PCB footprint is frozen.
This page combines manufacturer device information, distributor availability, drop-in alternatives in the same 14-pin DIP footprint, comparison tables and practical design notes so engineers can evaluate the PIC16F1575-I/P against neighbouring PIC16 devices without pulling the full datasheet apart first.
এর জন্য ড্রপ-ইন বিকল্প PIC16F1575-I/P — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PIC16F1575-I/P (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, ADC, DAC, Mounting Type, Program Memory (Flash).
PIC16F1574-I/P
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC16F1573-I/P
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F1613-I/P
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC16F18854-I/P
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F18855-I/P
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F1575-I/P সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | 8-Bit RISC Microcontroller (PIC16 core) |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 32 MHz |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| Program Memory Type | Flash, In-Circuit Serial Programming (ICSP) |
| Data Memory (RAM) | 1 KB |
| ADC | 10-bit ADC |
| DAC | 1-channel 5-bit DAC |
| PWM Channels | 4 x 16-bit PWM with independent timers |
| অপারেটিং তাপমাত্রার পরিসর | -40 C to +85 C (industrial grade) |
| প্যাকেজ | 14-PDIP (through-hole), 14 pins |
| Program Memory Words | 8192 ROM words |
| Architecture | PIC16 8-bit RISC core |
| Internal Oscillator | Yes, with 4x PLL to 32 MHz |
| মাউন্টিং টাইপ | Through-hole (THT) |
PIC16F1575-I/P পিন কনফিগারেশন
| পিন 1 | RA0/AN4/C12IN0-/MCLR — Port A bit 0, analog input AN4, comparator C1 input 0 minus, and multi-function reset input |
| পিন 2 | RA1/AN5/C12IN1-/C2OUT — Port A bit 1, analog input AN5, comparator C1 input 1 minus, and comparator C2 output |
| পিন 3 | RA2/AN6/VREF-/CVREF/C2IN+ — Port A bit 2, analog input AN6, negative voltage reference, comparator reference output and comparator C2 input plus |
| পিন 4 | RA3/AN7/C1IN+ — Port A bit 3, analog input AN7, comparator C1 input plus |
| পিন 5 | RC0/AN8/C1OUT/CLC1OUT — Port C bit 0, analog input AN8, comparator C1 output and CLC1 output |
| পিন 6 | RC1/AN9/C1IN2-/CLC2OUT — Port C bit 1, analog input AN9, comparator C1 input 2 minus and CLC2 output |
| পিন 7 | RC2/AN10/C2IN2-/CLC3OUT — Port C bit 2, analog input AN10, comparator C2 input 2 minus and CLC3 output |
| পিন 8 | RC3/AN11/CLC4OUT — Port C bit 3, analog input AN11 and CLC4 output |
| পিন 9 | RC4/AN12 — Port C bit 4, analog input AN12 |
| পিন 10 | RC5/AN13 — Port C bit 5, analog input AN13 |
| পিন 11 | VDD — Positive supply voltage |
| পিন 12 | VSS — Ground reference |
| পিন 13 | RA5/OSC1/CLKIN/C12IN3- — Port A bit 5, oscillator input or external clock input, comparator C1 input 3 minus |
| পিন 14 | RA4/OSC2/CLKOUT/T1CKI/C12IN3+ — Port A bit 4, oscillator output or clock output, Timer1 clock input, comparator C1 input 3 plus |
সাধারণ ব্যবহার
PIC16F1575-I/P এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Multi-Channel LED Dimming and RGB Driver, Small Motor and Fan Speed Control, Industrial Sensor Conditioning and Data Acquisition, Appliance Control and User Interface, Battery Charger and Power Management Control, Programmable LED and Lighting Ballast Control.
Multi-Channel LED Dimming and RGB Driver
The PIC16F1575-I/P fits LED lighting because it delivers four independent 16-bit PWM channels, each with its own timer, which gives far finer duty-cycle resolution than the 8-bit PWM found in smaller PIC16 parts. At a 32 MHz maximum clock the timer resolution translates directly into dimming granularity, so a low percentage set-point still divides the load evenly across the string instead of blinking in coarse steps. In a typical RGB cove or architectural luminaire, three channels drive red, green and blue strings while the fourth channel is used for a white or status channel. The 5-bit DAC provides a trimmed colour-mixing set-point or driver current reference, and the 10-bit ADC samples a thermistor or ambient light sensor for auto dimming. Mounted in a 14-PDIP package, the device fits hand-assembled or low-volume luminaire electronics where surface-mount rework is undesirable.
সুপারিশকৃত
Small Motor and Fan Speed Control
For fan, pump and small brushless-DC motor control, the PIC16F1575-I/P combines four 16-bit PWM outputs with a 32 MHz core, giving the control loop enough resolution to keep speed ripple low and audibly quiet. The high-resolution duty control replaces the coarse stepped drive of an 8-bit PWM, which matters directly for acoustic noise in small fans and for avoiding torque pulsation in a motor gearbox. Three PWM outputs can drive a three-phase or complementary bridge arrangement while the fourth provides an auxiliary gate-drive or braking chopper function. The 10-bit ADC closes the speed loop by sampling the sensor output, and the 5-bit DAC can generate a soft-start ramp reference or a bias level for the gate driver. The through-hole 14-PDIP package is a practical choice for appliance and HVAC controllers assembled on through-hole motherboards.
সুপারিশকৃত
Industrial Sensor Conditioning and Data Acquisition
The PIC16F1575-I/P is a natural fit for industrial sensing nodes because it integrates a 10-bit ADC with a 5-bit DAC on the same die, allowing a single device to both measure a transducer and bias it. A typical pressure or level transmitter conditioning board uses the ADC to acquire a 0-5 V or 4-20 mA-derived signal, then applies digital filtering and linearisation in firmware before the result is transmitted. The four 16-bit PWM channels can drive a sensor excitation or reference channel where a modulated stimulus is needed to reject drift. Serial peripherals including UART, SPI and I2C let the same microcontroller report to a host or drive a local display, and the 32 MHz clock leaves enough headroom for calibration tables and digital filtering loops. The industrial -40 C to +85 C grade suits equipment installed outside conditioned enclosures.
সুপারিশকৃত
Appliance Control and User Interface
Appliance controllers such as washing machines, coffee makers and small kitchen equipment often need a mix of discrete control and a simple human interface, and the PIC16F1575-I/P provides both on one die. The 10-bit ADC reads the water level, temperature or weight sensor, the four 16-bit PWM channels drive relays, solenoids, motor elements or indicator LEDs, and the 5-bit DAC generates a control reference or test point. Because the PIC16 core is well supported across the appliance industry, firmware can be reused across several model variants that differ mainly in pin mapping. The 14-pin PDP package fits the through-hole main boards still common in cost-driven appliance designs, while the 32 MHz clock supports debouncing, keypad scanning and a simple state-machine display refresh within a tight power budget.
সুপারিশকৃত
Battery Charger and Power Management Control
In a small battery charger or power-path controller, the PIC16F1575-I/P handles the control loop for current and voltage regulation while its 14 KB of Flash holds the charging algorithm, state machine and fault handling. The 10-bit ADC monitors the battery voltage, charge current and temperature, and the high-resolution PWM outputs drive the charge FET and the input current-limit loop, where fine duty-cycle control reduces ripple on the battery and improves charge efficiency. The 5-bit DAC can supply a trimmed reference or a low-current fault indicator, and the UART output allows a charger to report state to a system controller or service tool. The through-hole package and industrial temperature grade suit power tools, e-bike accessories and portable medical or laboratory equipment built on assembled-through-hole boards.
সুপারিশকৃত
Programmable LED and Lighting Ballast Control
Ballast and sign-driver electronics benefit from a microcontroller that can combine precise timing with analog regulation, and the PIC16F1575-I/P does both on a single chip. The four 16-bit PWM channels with independent timers are used to drive the switching outputs of the ballast stage, and the 10-bit ADC closes the regulation loop on the rectified bus voltage and the LED string current, keeping brightness constant as supply voltage and LED Vf shift with temperature. The 5-bit DAC generates the trimmed current or voltage set-point, and the flexible digital I/O with peripheral pin-select keeps the board to a small number of traces. Because flash program memory allows in-circuit serial programming, ballast vendors can tune the same hardware for different lamp types in end-of-line test, which considerably shortens product-variant bring-up compared with mask-programmed alternatives.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC16F1575-I/P — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PIC16F1574-I/P | PIC16F1573-I/P | PIC16F1613-I/P | PIC16F18854-I/P | PIC16F18855-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-PDIP | 14-PDIP - same | 14-PDIP - same | 14-PDIP - same | 14-PDIP - same | 14-PDIP - same |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Program Memory | 14 KB (8K x 14 words) | 14 KB (8K x 14 words) | 14 KB (8K x 14 words) | 14 KB (8K x 14 words) | 14 KB (8K x 14 words) | 14 KB (8K x 14 words) |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| PWM Channels | 4 x 16-bit PWM with independent timers | Fewer 16-bit PWM channels than the PIC16F1575 | Reduced 16-bit PWM channel count | Different PWM/analog peripheral mix | Different PWM/analog peripheral mix | Different PWM/analog peripheral mix |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Operating Temperature | -40 C to +85 C (industrial grade) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
মূল পার্থক্যসমূহ
- Full four-channel 16-bit PWM set in a 14-pin through-hole package (বনামPIC16F1573-I/P)
- Highest clock rate in the drop-in set (বনামPIC16F1613-I/P)
- On-chip 10-bit ADC and 5-bit DAC together with the comparator-based analog block (বনামPIC16F1574-I/P)
- Flash program memory with in-circuit serial programming (বনামPIC16F1573-I/P)
ডিজাইন নোট
The 14-PDIP footprint is generous but the pin multiplexing is not. Pins 1 to 4 are shared between Port A digital I/O, the analog inputs AN4 to AN7, the internal voltage reference outputs and the comparator inputs, and pins 13 and 14 double as the oscillator pins RA5/OSC1 and RA4/OSC2. Plan the board so that any crystal or high-speed clock routing does not run underneath or adjacent to sensitive analog inputs, and keep the MCLR pull-up resistor on pin 1 close to the device with a short, quiet ground return. Route the analog ground reference on pin 12 back to the ADC star point rather than into a switching current path.
Estimated: with VDD at 5 V and the core running at 32 MHz, the dynamic current is the dominant draw, so a design that leaves all four 16-bit PWM channels and the ADC running continuously should budget a supply that can deliver tens of milliamps per device plus peripheral load. Place a 100 nF ceramic decoupling capacitor at each VDD pin as close to the pin as possible with a short ground loop, and add a bulk 1 uF to 10 uF ceramic or low-ESR electrolytic near the device. Because four high-resolution PWM channels switching simultaneously can inject ripple onto the analog rails, star the VREF and comparator reference routing away from the PWM return paths.
A frequent design error is assuming the 16-bit PWM channels of the PIC16F1575 behave like the 8-bit PWM of smaller PIC16 parts. The PWM resolution changes duty-cycle granularity, so legacy firmware that assumed coarse step sizes will behave differently after a swap to this device. Another common mistake is using the -I industrial part in a design that assumes the extended -40 C to +125 C automotive range; that range is not provided by this ordering code. Finally, verify the oscillator configuration in firmware: switching between internal RC and an external crystal changes both timing accuracy and which pins are available for I/O.
কমপ্লায়েন্স তথ্য
The -I suffix indicates the industrial temperature grade, -40 C to +85 C, not an automotive qualification. Compliance declarations for this part were not listed on the manufacturer page retrieved, so RoHS, REACH, lead-free and halogen-free status are recorded as unknown rather than assumed.
