PIC16F916-I/SS - 8-Bit 20MHz Flash MCU | Microchip Technology
MPN: PIC16F916-I/SS ✓ সক্রিয়PIC16F916-I/SS সারাংশ
A microcontroller is a programmable semiconductor that integrates a CPU core, Flash program memory, data memory, timers, communication peripherals, and I/O ports into one device. Within the product hierarchy, the PIC16F916-I/SS is an 8-bit MCU, part of the PIC16 family, and belongs to the broader embedded-controller and semiconductor categories. Its compact package supports cost-sensitive designs where space and power consumption matter.
Key characteristics include a maximum clock speed of 20 MHz, approximately 200 ns instruction execution, and an instruction set described as containing 35 single-word instructions. The device provides 14 KB of Flash program memory, 25 I/O pins, an integrated LCD driver, and nanoWatt power-management capabilities. Together, these features support responsive control loops, direct segment display operation, and compact embedded products.
The PIC16 core uses a compact instruction architecture intended to simplify firmware development while retaining dedicated hardware for common control tasks. Flash memory permits in-system reprogramming, while the LCD-driver resources can reduce the component count in meter, instrument, appliance, and industrial-panel designs. The manufacturer identifies the PIC16F916 as an in-production device and supports development with the MPLAB toolchain and PICkit in-circuit debugging products.
Typical uses include blood-pressure monitors and other compact medical-control products, LCD-equipped instrumentation, household appliances, industrial controls, sensor interfaces, and low-power embedded equipment. The 25 available I/O pins provide connections for sensors, buttons, displays, actuators, and communication peripherals while keeping the board area small.
Designers should verify each I/O pin's multiplexed function, timing, and electrical limits against the manufacturer datasheet before assigning LCD segments or peripherals. Decoupling, programming access, oscillator configuration, and unused-pin treatment should follow the device's recommended circuit and PCB guidelines.
This product page combines the manufacturer device specifications with practical pin, application, replacement, and design guidance. It is intended to accelerate engineering selection while making the differences between electrically similar PIC16F91x devices explicit.
এর জন্য ড্রপ-ইন বিকল্প PIC16F916-I/SS — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PIC16F916-I/SS (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Timers, Core Architecture, MSL Level, Program Memory (Flash).
PIC16F916-E/SS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC16F913-I/SS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC16F914-I/SS
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F913-E/SS
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC16F914-E/SS
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F916-I/SS সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Microcontroller Type | 8-bit RISC Flash MCU |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 14 KB Flash (8K x 14 words) |
| Instruction Execution Time | 200 ns |
| General-Purpose I/O Count | 25 I/O |
| প্যাকেজ | 28-pin SSOP |
| মাউন্টিং টাইপ | Surface mount |
| Core | PIC16 RISC core |
| Instruction Set Size | 35 single-word instructions |
| LCD Driver | Integrated LCD driver |
| Power Technology | nanoWatt technology |
| Program Memory Type | Flash |
| Product Status | In production |
| Development Tool Support | MPLAB toolchain and PICkit in-circuit debugger/programmer |
PIC16F916-I/SS 28-pin ssop পিন কনফিগারেশন গাইড
PIC16F916-I/SS (28-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC16F916-I/SS.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PIC16F916-I/SS এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Blood Pressure Monitor Control, LCD Instrument Panel, Industrial Sensor Interface, Household Appliance Controller, Low-Power Embedded Equipment, Programmable Control Module.
Blood Pressure Monitor Control
The PIC16F916-I/SS fits compact blood-pressure monitor controllers because it combines an 8-bit PIC16 core, 20 MHz maximum operating speed, 14 KB of Flash, and 25 I/O pins with an integrated LCD driver. The MCU can coordinate pressure-sensor sampling, valve or pump control, button input, and display-segment multiplexing while maintaining a compact 28-pin SSOP footprint. Its approximately 200 ns instruction execution supports responsive sequencing of measurement and user-interface tasks. The LCD resources can reduce the need for an external segment driver, although the selected glass, segment map, and shared-pin requirements must be validated before layout release.
সুপারিশকৃত
LCD Instrument Panel
PIC16F916-I/SS is suitable for LCD-based instrument panels where a dedicated display driver would add cost and board area. Its integrated LCD driver works with 25 I/O pins in a 28-pin SSOP package, allowing engineers to connect segment and common-display lines alongside switches, indicators, and measurement inputs. The 20 MHz maximum CPU speed and approximately 200 ns instruction time provide practical headroom for display refresh, keypad scanning, and control logic. Because display multiplexing can consume pins shared with general-purpose I/O, designers should build the required segment map and pin-allocation matrix before committing the PCB footprint.
সুপারিশকৃত
Industrial Sensor Interface
The PIC16F916-I/SS can serve as the central controller in a compact industrial sensor interface because it provides 25 I/O pins, 14 KB of Flash, and a 20 MHz maximum operating frequency in a surface-mount SSOP package. Engineers can use the I/O resources for digital sensors, alarm outputs, status indicators, and communication peripherals while retaining sufficient program memory for acquisition, filtering, diagnostics, and configuration logic. The nanoWatt feature supports power-conscious designs, but peripheral clocks, idle modes, and wake-up behavior must be configured carefully to achieve the intended low-power behavior in the finished product.
সুপারিশকৃত
Household Appliance Controller
PIC16F916-I/SS works well in appliance-control boards that combine a segment display with switches, sensors, relays, and status outputs. Its 8-bit PIC16 architecture and approximately 200 ns instruction execution support responsive user-interface and state-machine operation, while 14 KB of Flash provides space for product logic and configuration handling. The 28-pin SSOP package reduces board footprint, and the integrated LCD driver simplifies common appliance displays. Engineers should budget decoupling near the supply pins, provide the required programming access, and confirm that high-energy loads are isolated from sensitive MCU and display connections.
সুপারিশকৃত
Low-Power Embedded Equipment
PIC16F916-I/SS can support compact, power-conscious embedded equipment because it combines nanoWatt technology with an 8-bit core, Flash program memory, and a 25-I/O-pin interface. The device is suitable for battery-assisted instruments, portable monitors, and control products that periodically wake to sample inputs, update a display, or update stored settings before returning to a low-power state. Actual battery life depends on the selected clock, active duty cycle, analog circuitry, LCD bias requirements, and peripheral configuration. Validate sleep currents, wake-up sources, brownout behavior, and display power consumption at the system level rather than relying only on nominal microcontroller specifications.
সুপারিশকৃত
Programmable Control Module
PIC16F916-I/SS is appropriate for a compact programmable control module that must combine application firmware with external inputs and outputs. Its 14 KB Flash allocation supports structured control code, 25 I/O pins support peripheral expansion, and the 20 MHz maximum clock permits responsive timing in product designs. The same MCU can manage a display, acquire sensor data, and operate actuators without requiring a separate processor. Firmware development is supported by the Microchip Technology MPLAB environment and compatible PICkit tools, allowing the same hardware platform to be reused across several product variants with different display maps, sensor combinations, or control policies.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC16F916-I/SS — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PIC16F916-E/SS | PIC16F913-I/SS | PIC16F914-I/SS | PIC16F913-E/SS |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| CPU Architecture | 8-bit PIC16 RISC core | 8-bit PIC16 RISC core | 8-bit PIC16 RISC core | 8-bit PIC16 RISC core | 8-bit PIC16 RISC core |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Temperature Grade | Industrial grade | Extended grade | Industrial grade | Industrial grade | Extended grade |
মূল পার্থক্যসমূহ
- Largest confirmed program-memory allocation among the compared PIC16F91x choices (বনামPIC16F913-I/SS)
- Same base-device and package arrangement as the closest grade-related alternative (বনামPIC16F916-E/SS)
- 25 I/O pins provide a practical balance of control connectivity and package density (বনামPIC16F914-I/SS)
ডিজাইন নোট
Use the 28-pin SSOP land pattern and pin-1 orientation defined by the Microchip Technology package drawing. Place the required bypass capacitors close to VDD and VSS pins, and preserve access to the programming interface. Because SSOP leads are closely spaced, verify solder mask, paste volume, and assembly clearances against the recommended footprint before releasing the PCB files.
Build the LCD and general-purpose I/O allocation before routing the board because some display functions can share pins with other peripherals. Maintain a pin-function matrix that records the selected oscillator pins, programming connections, segment outputs, commons, and application I/O. This prevents a late display-map change from forcing component placement or track modifications.
Calculate the average and peak supply demand before selecting the regulator and bulk capacitance. Decouple the MCU supply locally, route return current through the ground plane, and keep switching-regulator and high-current output paths away from LCD and sensitive input traces. If nanoWatt operation is required, measure sleep current in the finished assembly because external circuitry can dominate the MCU's contribution.
Do not treat every 28-pin SSOP PIC16 variant as an automatic substitution. Confirm the exact memory capacity, peripheral set, pin multiplexing, temperature grade, configuration bits, and package drawing. After changing variants, rebuild the firmware with the correct device configuration and retest startup, LCD output, timing, reset behavior, programming, and unused-pin states.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status was identified for the exact ordering code. AEC-Q100 is not applicable to the general-purpose industrial-grade device.
