PIC24FJ64GB204-I/PT - 32MHz 16-Bit MCU with Crypto | Microchip
MPN: PIC24FJ64GB204-I/PT ✓ সক্রিয়PIC24FJ64GB204-I/PT সারাংশ
A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC24FJ belongs to the 16-bit embedded-controller hierarchy, where the Harvard-style processor architecture supports efficient instruction execution for control, communications, and data-acquisition products. This device extends that general embedded-control role with USB, cryptographic hardware, and nanoWatt eXtreme Low Power features.
Its key specifications include a 32 MHz operating frequency, 16 MIPS instruction throughput, 64 KB Flash organized as 64K x 8, and 8 KB data RAM. The integrated USB OTG interface supports USB-connected embedded products, while the cryptographic module adds hardware suitable for secure identification, authentication, and protected data-handling designs. Operation over a 2.0 V to 3.5 V supply range permits integration with common 3.3 V system rails.
The device provides 34 I/O pins in its 44-pin package, along with advanced peripherals and 68 interrupt sources. Its architecture is intended for low-power embedded applications where USB connectivity, controlled energy use, and compact code execution are important. Compared with a discrete processor design, the integrated MCU reduces external component count and keeps USB, security functions, timing, and communications control within one device family.
Typical uses include USB-connected security tokens, portable data-collection equipment, industrial control modules, human-interface devices, and compact consumer accessories. The 44-TQFP package also provides a straightforward upgrade path from related 44-pin PIC24FJ devices when the footprint, voltage range, and required peripherals remain compatible.
Design the PCB with short, impedance-controlled USB traces and a solid ground reference. Confirm pin multiplexing in the manufacturer pin-description table before assigning every I/O function. Use the supported programming and debug interfaces, and observe the device-specific decoupling and voltage requirements in the Microchip datasheet.
This page combines verified manufacturer and distributor information with practical guidance for package reuse, peripheral planning, USB implementation, low-power design, and same-footprint component selection. It also identifies the differences among closely related 44-pin options so engineers can choose a replacement without overlooking security, temperature-grade, or memory constraints.
এর জন্য ড্রপ-ইন বিকল্প PIC24FJ64GB204-I/PT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PIC24FJ64GB204-I/PT (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, ADC, Core, Maximum CPU Speed, Timers.
PIC24FJ64GB204-E/PT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC24FJ64GB004-I/PT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24FJ64GA104-I/PT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24HJ64GP504-I/PT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24FJ64GB204-I/ML
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24FJ64GB204-I/PT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Microcontroller Type | 16-bit Flash PIC24FJ microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 64 KB Flash (64K x 8) |
| Data Memory | 8 KB RAM |
| Operating Voltage Range | 2.0 V to 3.5 V |
| USB Interface | USB On-The-Go |
| Security Hardware | Integrated cryptographic module |
| Power Technology | nanoWatt eXtreme Low Power (XLP) |
| I/O Pin Count | 34 I/O pins |
| Interrupt Sources | 68 interrupt sources |
| Exception Traps | 4 traps |
| প্যাকেজ | 44-pin TQFP (10 mm x 10 mm) |
| মাউন্টিং টাইপ | Surface mount |
| Shipping Container | Tray |
| Temperature Grade | Industrial grade |
| Programming Interface | In-Circuit Serial Programming (ICSP) |
| Debug Interface | In-Circuit Debugging |
PIC24FJ64GB204-I/PT 44-pin tqfp (10 mm x 10 mm) পিন কনফিগারেশন গাইড
PIC24FJ64GB204-I/PT (44-pin tqfp (10 mm x 10 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC24FJ64GB204-I/PT.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PIC24FJ64GB204-I/PT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: USB Security Token, Portable Data Collector, Industrial Control Module, USB Human-Interface Device, Secure Configuration Interface, Connected Sensor Node.
USB Security Token
The PIC24FJ64GB204-I/PT fits a USB security token because it combines full-speed USB On-The-Go with an integrated cryptographic module in one 16-bit controller. Its 64 KB Flash provides room for firmware, device policies, and update code, while 8 KB of RAM supports USB descriptors, command processing, and cryptographic workflows. Operating from 2.0 V to 3.5 V allows use with common 3.3 V USB hardware. Place the MCU and supporting passives close to the USB connector, route D+ and D- as a controlled differential pair over a continuous ground plane, and isolate supply noise from sensitive digital circuitry. Validate enumeration behavior, suspend current, and command response time under the final USB host environment before production.
সুপারিশকৃত
Portable Data Collector
The PIC24FJ64GB204-I/PT is appropriate for a portable data collector that records sensor information and transfers it over USB. The 32 MHz core and 16 MIPS throughput provide responsive control, while 64 KB Flash and 8 KB RAM can hold acquisition firmware and working buffers. The nanoWatt XLP feature supports battery-oriented designs by reducing activity when sampling and USB transfer are inactive. A typical implementation uses serial peripherals to acquire sensor data, stores records in the available RAM, and periodically synchronizes with a host over USB OTG. Select capacitors and routing that satisfy the USB signal requirements, avoid placing noisy converters near D+ or D-, and validate sleep-mode wake time because the complete power budget depends on measurement interval and host enumeration behavior.
সুপারিশকৃত
Industrial Control Module
The PIC24FJ64GB204-I/PT suits industrial control modules that need deterministic local control plus a secure USB maintenance interface. Its 16-bit architecture executes at up to 32 MHz with 16 MIPS throughput, and its 34 I/O pins provide connections for sensors, indicators, and actuators. USB OTG can be used for configuration, diagnostics, or firmware updates, while the integrated cryptographic module supports identity and protected command functions. The industrial-grade ordering designation is appropriate where the enclosure remains within the specified temperature range. Design the PCB with separate analog and digital return paths, place input protection close to connectors, and provide local filtering for externally wired signals. Validate timing margins under the worst electrical noise and temperature conditions rather than relying only on nominal clock performance.
সুপারিশকৃত
USB Human-Interface Device
The PIC24FJ64GB204-I/PT can serve as the controller in a USB keyboard, control surface, or compact human-interface accessory. Its 32 MHz 16-bit processor provides enough timing margin for input scanning, USB protocol handling, status feedback, and device management. The 64 KB Flash is useful for boot code, descriptors, configuration data, and application firmware, while the 8 KB RAM can support buffered HID reports. USB On-The-Go allows a single controller to manage device behavior across connection states. Keep the USB differential pair away from switching nodes and high-current LED drivers, observe recommended series termination, and provide a stable 3.3 V rail with local decoupling. Validate enumeration, suspend and resume behavior, and simultaneous host polling across all intended operating systems.
সুপারিশকৃত
Secure Configuration Interface
The PIC24FJ64GB204-I/PT is useful as a secure configuration interface for a compact embedded product that must exchange credentials, firmware, or protected parameters over USB. The integrated cryptographic module supplies hardware-assisted security functions without requiring a separate secure processor, and 64 KB Flash can store a bootloader plus application code. USB OTG provides a standard maintenance connection, while the 16-bit CPU can validate commands and manage device state. Isolate the secure interface from untrusted external connectors, protect access through device-side authentication, and use unique credentials for deployed products. Firmware update mechanisms should validate image integrity before activation and support a controlled rollback path. Validate USB suspend behavior and ensure that security functions remain inaccessible when the product is disconnected or placed in a low-power state.
সুপারিশকৃত
Connected Sensor Node
The PIC24FJ64GB204-I/PT works as a compact sensor node that gathers local measurements and provides a USB maintenance or data-export path. Its 34 I/O pins support digital sensors, communication peripherals, and status indicators, while 64 KB Flash accommodates node firmware and protocol code. The 32 MHz maximum clock and 16 MIPS throughput are appropriate for coordinating sampling, filtering, and USB data transfer. Operate the node from 2.0 V to 3.5 V to match low-energy sensor rails and reduce conversion overhead. Use separate routing for sensitive sensor inputs and USB data, provide local bypass capacitance at the MCU supply pins, and avoid long unprotected traces entering the board. Test the complete sampling-and-upload cycle at the highest expected operating frequency to establish real conversion latency and USB throughput.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC24FJ64GB204-I/PT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PIC24FJ64GB204-E/PT | PIC24FJ64GB004-I/PT | PIC24FJ64GA104-I/PT | PIC24HJ64GP504-I/PT | PIC24FJ64GB204 |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP (10 mm x 10 mm) | 44-TQFP family |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Temperature Ordering Code | -I industrial grade | -E extended-temperature option | -I industrial grade | -I industrial grade | -I industrial grade | Base device ordering code |
মূল পার্থক্যসমূহ
- Closest same-family replacement (বনামPIC24FJ64GB204-E/PT)
- Matches the primary memory footprint (বনামPIC24FJ64GB004-I/PT)
- Combines USB and crypto in one MCU (বনামPIC24FJ64GA104-I/PT)
- Deterministic 16-bit processing performance (বনামPIC24HJ64GP504-I/PT)
ডিজাইন নোট
Route USB D+ and D- as a short, continuous differential pair over an uninterrupted ground plane, with the connector placed close to the controller. Avoid vias, splits in the ground plane, and parallel runs with switching-converter nodes. Keep the MCU supply bypass capacitor adjacent to its power pin and provide a low-impedance return for USB shield or connector ground according to the system EMC strategy. Validate the completed layout for impedance and radiated emissions rather than relying only on schematic connectivity.
The device operates across 2.0 V to 3.5 V, so use a supply design that stays within the documented operating range during USB attach, detach, transient, and startup events. Place bulk and high-frequency decoupling near the MCU and USB connector, and isolate noisy switching components from sensitive signal paths. For battery-powered products, measure active, idle, and USB-suspend currents in the final firmware state because the nanoWatt XLP feature only reduces consumption when the application enables the appropriate sleep behavior.
Assign the 44-pin TQFP footprint from the manufacturer mechanical drawing and confirm every pin's alternate function in the PIC24FJ64GB data sheet. Do not infer USB, programming, debug, oscillator, or peripheral assignments solely from the I/O count. Maintain short connections for sensitive inputs, place external protection close to connectors, and separate analog returns from digital switching currents. A footprint-compatible alternative should not be approved until pin names, alternate functions, and power requirements have been compared line by line.
The most common selection mistake is treating every 44-pin PIC24FJ64 variant as interchangeable. The target combines USB On-The-Go with an integrated cryptographic module, while the related GB004 shares the stated memory capacity but is not identified as having the same crypto feature. Also do not confuse the -I/PT industrial tray ordering code with -E/PT or a different package suffix. Verify the complete MPN, temperature coverage, USB implementation, crypto requirements, and exact package before releasing a replacement to production.
কমপ্লায়েন্স তথ্য
The available product information identifies an industrial-grade ordering option but does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. Confirm environmental and product-compliance documents before procurement.