PIC24FV16KM202-I/SP - 32MHz 16-bit XLP MCU | Microchip
MPN: PIC24FV16KM202-I/SP ✓ সক্রিয়PIC24FV16KM202-I/SP সারাংশ
A low-power microcontroller is a compact embedded controller designed to execute control, measurement, and communication tasks while limiting energy use. The PIC24F family combines a general-purpose microcontroller core with analog peripherals and nanoWatt eXtreme Low Power, or XLP, technology. This product type supports battery-powered instruments, industrial controls, and connected embedded systems where processing capability, analog integration, and compact package size must coexist.
Key features include up to 16 MIPS of performance at 3.3 V, 5.5K x 24-word Flash organization, 512 bytes of EEPROM, and integrated analog conversion functions. The 12-bit ADC supports embedded measurement, while the 8-bit DAC can provide controlled analog voltage outputs without requiring a separate converter. Integrated operational amplifiers further reduce the component count in signal-conditioning and thresholding circuits.
The device uses the high-performance 16-bit PIC24 architecture and includes flexible Capture/Compare/PWM modules together with Configurable Logic Cell resources. These peripherals support timing, waveform generation, motor or actuator control, and hardware-assisted signal processing. The integrated analog and logic resources allow a compact design to perform measurement, control, and output functions without relying on several discrete peripherals.
Typical uses include low-cost industrial control panels, battery-operated environmental sensors, compact power-conversion controllers, instrument front ends, and small motor-control systems. Its 28-pin SPDIP format is particularly useful for prototypes, educational platforms, and through-hole industrial assemblies where reworkability and socket compatibility are practical requirements.
When designing a PCB, preserve the exposed programming and debug functions defined in the manufacturer pin-description table, and route analog inputs away from switching nodes and high-current paths. Stable decoupling near the supply pins remains essential for predictable ADC, DAC, and op-amp performance. The manufacturer datasheet should govern final pin assignments, clock settings, and peripheral configuration.
This page combines manufacturer specifications, practical application guidance, package information, and same-footprint replacement analysis to support faster component selection and board-level planning.
এর জন্য ড্রপ-ইন বিকল্প PIC24FV16KM202-I/SP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PIC24FV16KM202-I/SP (একই form factor এবং footprint) — পার্থক্য রয়েছে Capture/Compare/PWM Modules, Core Architecture, Package, RoHS Status, ADC.
PIC24F16KM202-I/SP
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24FV16KM202-E/SP
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24F16KM202-E/SP
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24FV16KM202-I/SP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Microcontroller Type | 16-bit RISC microcontroller |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS at 3.3 V |
| Program Memory Type | Flash |
| Program Memory Size | 16 KB (5.5K x 24 words) |
| RAM Size | 2 KB |
| EEPROM Size | 512 bytes |
| ADC Resolution | 12-bit |
| DAC Resolution | 8-bit |
| Integrated Operational Amplifiers | Yes |
| Capture/Compare/PWM Modules | Yes |
| Configurable Logic Cell | Yes |
| Low-Power Technology | nanoWatt eXtreme Low Power (XLP) |
| Security | Basic code-guard security |
| প্যাকেজ | 28-pin SPDIP |
| মাউন্টিং টাইপ | Through-hole |
PIC24FV16KM202-I/SP 28-pin spdip পিন কনফিগারেশন গাইড
PIC24FV16KM202-I/SP (28-pin spdip প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC24FV16KM202-I/SP.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PIC24FV16KM202-I/SP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Environmental Sensors, Compact Industrial Control Panels, Motor and Actuator Control, Low-Cost Instrument Front Ends, Low-Power Data Acquisition, Embedded Control and Teaching Platforms.
Battery-Powered Environmental Sensors
The PIC24FV16KM202-I/SP fits compact environmental sensing because it combines a 32 MHz, 16-bit PIC24 processor with a 12-bit ADC and nanoWatt eXtreme Low Power technology. The MCU can digitize outputs from temperature, humidity, light, or gas sensors while using the integrated 8-bit DAC and operational amplifiers for local excitation, biasing, or threshold functions. Its 16 KB Flash and 2 KB RAM support calibration tables, filtering state, and sensor-specific firmware without requiring a larger package. For battery-life optimization, use the MCU’s low-power modes between measurements and account for sensor self-heating and analog-conditioning current in the complete power budget.
সুপারিশকৃত
Compact Industrial Control Panels
The PIC24FV16KM202-I/SP provides a practical control platform for small industrial panels because its 32 MHz processor handles communication, logic, and control tasks while the 12-bit ADC monitors analog process signals. A 28-pin SPDIP package supports through-hole assembly and prototype interchangeability, while 16 KB of Flash and 2 KB of RAM are suitable for modest control loops and user-interface logic. The integrated 8-bit DAC can generate a low-speed reference or test output, and the operational amplifiers can assist with conditioning. Designers should still verify digital I/O levels, analog input ranges, isolation requirements, and timing margins before connecting field-wired sensors.
সুপারিশকৃত
Motor and Actuator Control
The PIC24FV16KM202-I/SP is suitable for compact motor or actuator-control boards because it integrates flexible Capture/Compare/PWM modules with a 16-bit core capable of operating up to 32 MHz. PWM outputs can command a driver stage, while capture inputs can measure feedback edges or timing events. The 12-bit ADC can monitor current, position, temperature, or supply conditions, and the Configurable Logic Cell can provide additional hardware logic. The 28-pin SPDIP footprint simplifies through-hole prototypes, but final designs must include appropriate driver transistors, protection, isolation where required, and thermal management for the power stage rather than driving loads directly from the MCU.
সুপারিশকৃত
Low-Cost Instrument Front Ends
The PIC24FV16KM202-I/SP can serve as the control and measurement core of a compact laboratory or field instrument. Its 12-bit ADC supports analog measurement, the operational amplifiers can buffer or amplify inputs, and the 8-bit DAC provides a basic reference output for calibration or stimulus generation. A 32 MHz, 16-bit processor leaves performance headroom for filtering, calibration, and communications, while 512 bytes of EEPROM can hold small configuration records. Critical instrument designs should verify ADC acquisition behavior, op-amp stability, input bandwidth, reference accuracy, noise performance, and grounding rather than assuming general-purpose ratings are sufficient for precision measurement.
সুপারিশকৃত
Low-Power Data Acquisition
The PIC24FV16KM202-I/SP supports low-power data-acquisition nodes where each channel must combine sampling, local processing, and data handling in a small controller. The 12-bit ADC reduces the need for a separate converter, while the 32 MHz PIC24 core can filter and packet data before transmission. Two kilobytes of RAM is sufficient for manageable buffering, and the 512-byte EEPROM can retain calibration or configuration parameters. System partitioning should keep the MCU, ADC, communications circuitry, and regulators on appropriately controlled power domains, allowing unused blocks to remain inactive during sleep intervals to reduce total board energy consumption.
সুপারিশকৃত
Embedded Control and Teaching Platforms
The PIC24FV16KM202-I/SP is well suited to educational and general embedded-control platforms because it combines a familiar 16-bit PIC24 architecture with analog conversion and configurable peripherals in a 28-pin SPDIP package. Students can use the same MCU to demonstrate ADC acquisition, PWM generation, timer-based control, interrupt handling, and low-power state transitions. The 16 KB Flash and 2 KB RAM provide enough space for focused demonstrations without introducing a large memory footprint. A socketed prototyping board should provide accessible programming signals, stable decoupling, protected I/O, and clear labeling for analog and power pins so experiments do not damage the controller.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC24FV16KM202-I/SP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PIC24F16KM202-I/SP | PIC24FV16KM202-E/SP | PIC24F16KM202-E/SP |
|---|---|---|---|---|
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 16 KB (5.5K x 24 words) | 16 KB | 16 KB | 16 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 512 bytes | 512 bytes | 512 bytes | 512 bytes |
| Temperature-Grade Code | I/SP industrial | I/SP industrial | E/SP extended | E/SP extended |
মূল পার্থক্যসমূহ
- The target combines the FV low-power family with a 12-bit ADC, 8-bit DAC, and integrated operational amplifiers (বনামPIC24F16KM202-I/SP)
- Industrial-grade ordering code is directly retained (বনামPIC24FV16KM202-E/SP)
- No PCB footprint change is required for the documented same-package options (বনামPIC24F16KM202-E/SP)
ডিজাইন নোট
Place the required supply-decoupling capacitors close to the corresponding VDD and VSS pins, following the manufacturer’s recommended values and layout. Keep analog inputs and the 8-bit DAC away from PWM outputs, switching-regulator nodes, and high-current return paths. The 28-pin SPDIP footprint provides through-hole access, but analog performance still depends on short traces, controlled grounding, and separating noisy digital return currents from sensitive measurement nodes.
Design the 3.3 V power path to meet the controller and analog-peripheral requirements without excessive ripple. The MCU can operate at up to 16 MIPS at 3.3 V, so processor activity can change current demand rapidly during active execution. Use local bulk and high-frequency decoupling, verify the power source’s transient response, and include brownout behavior in firmware so measurements are not trusted during an unstable supply transition.
Do not interchange the I/SP, I/SO, I/ML, and I/SS suffixes when populating an existing PCB; they identify different packages. Also do not assume that the related PIC24F16KM202 ordering code is automatically software- and qualification-identical. Confirm device identification, programming configuration, temperature limits, pin multiplexing, and peripheral mapping in Microchip documentation before approving a substitution for production.
Use the manufacturer pin-description table as the authoritative map for programming, debug, reset, analog, and digital functions. Because many I/O pins are multiplexed, assign analog inputs and PWM outputs early in the PCB layout rather than after logic development. Keep programming and debug access unobstructed for production programming, and provide adequate clearances around the through-hole package to reduce soldering and rework damage.
কমপ্লায়েন্স তথ্য
The manufacturer product page and listing snippets do not state the requested compliance classifications. The Basic code-guard feature is a device security function rather than a material-compliance certification.
