R5F10PPJKFB#V5 - 16-Bit RL78/F14 MCU | Renesas Electronics
MPN: R5F10PPJKFB#V5 ✓ সক্রিয়R5F10PPJKFB#V5 সারাংশ
A microcontroller is the central programmable element of an embedded system. It combines a CPU core, flash program memory, data RAM, timers, communication peripherals, analog interfaces, and interrupt control on one integrated circuit. Within the Renesas product hierarchy, the R5F10PPJKFB#V5 belongs to the RL78/F14 family of 16-bit microcontrollers, which sits within Renesas' broader embedded and automotive-control portfolio.
The verified device information identifies a 16-bit MCU architecture and the RL78/F14 family. Renesas describes the family as an upper-level member of the RL78 series with a broad lineup spanning 30 to 100 pins and 48 to 256 KB of flash memory. The family emphasizes low current consumption, while integrated CAN and LIN connectivity reduce the need for separate communication devices in compact automotive and industrial designs.
The R5F10PPJKFB#V5 is differentiated by its combination of embedded communications, motor-control-oriented peripherals, and low-power operation. CAN support is useful for vehicle networking and industrial communication buses, while LIN supports lower-cost automotive subnetworks. The family description also identifies timer RD, comparator functionality, and functional-safety capabilities as application-oriented resources for controlled actuator and motor systems.
Typical uses include automotive body and dashboard controllers, CAN gateway equipment, LIN-based sensor nodes, industrial motor controllers, and compact embedded appliances. In these systems, the integrated communications interfaces can shorten firmware development by avoiding external bus transceivers at the protocol-processing level, although the design must still include suitable physical-layer transceivers for CAN and LIN.
PCB design should follow the exact dimensional drawing and pin table in the Renesas datasheet for the selected suffix. Confirm the package pin count, exposed-pad connection, oscillator requirements, reset behavior, and programming interface before layout. Firmware should also account for the package-specific pin multiplexing and peripheral channel assignments rather than assuming that every RL78/F14 device has identical connector assignments.
This product page organizes the verified R5F10PPJKFB#V5 information with practical application guidance, same-package suffix comparisons, and engineering-oriented design notes. It is intended to help designers identify the correct Renesas ordering code, evaluate communication requirements, and move confidently into schematic, PCB-layout, and firmware validation.
এর জন্য ড্রপ-ইন বিকল্প R5F10PPJKFB#V5 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
R5F10PPJKFB#H5
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →R5F10PPJKFB#X5
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F10PPJKFB#V5Q
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F10PPJKFB#X5Q
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F10PPJKFB#V5 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 16-bit microcontroller |
| Series | RL78/F14 |
| CPU Architecture | 16-bit |
| CAN Interface | Built-in CAN module |
| LIN Interface | Built-in LIN module |
| BLDC Motor Control Support | Supported by RL78/F14 family |
| Timer RD | Supported by RL78/F14 family |
| Comparator | Supported by RL78/F14 family |
| Functional Safety Features | Supported by RL78/F14 family |
| Family Flash Memory Range | 48 KB to 256 KB |
| Family Package Range | 30 pins to 100 pins |
| প্যাকেজ | LFQFP |
| মাউন্টিং টাইপ | Surface mount |
R5F10PPJKFB#V5 lfqfp পিন কনফিগারেশন গাইড
R5F10PPJKFB#V5 (lfqfp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি R5F10PPJKFB#V5.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
R5F10PPJKFB#V5 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive CAN Gateway Controller, LIN Automotive Sensor Node, BLDC Motor Controller, Industrial Communication Controller, Automotive Body Control Module, Low-Power Embedded Appliance.
Automotive CAN Gateway Controller
The R5F10PPJKFB#V5 fits an automotive CAN gateway because the RL78/F14 family includes a built-in CAN controller, while its 16-bit architecture supports protocol routing, diagnostic handling, and supervisory logic. The MCU can process frames and coordinate vehicle-network functions without relying on a separate communications processor. A qualified CAN transceiver is still required between the controller pins and the physical bus. This arrangement reduces board area and firmware overhead compared with adding a discrete communication controller. Before layout, verify the exact peripheral-channel assignments, CAN timing limits, transceiver standby strategy, watchdog configuration, and suffix qualification against the vehicle program requirements.
সুপারিশকৃত
LIN Automotive Sensor Node
The R5F10PPJKFB#V5 is appropriate for a compact LIN sensor node because the RL78/F14 family provides an integrated LIN module and emphasizes low current consumption. The MCU can acquire sensor information, perform local filtering, and report measurements across a LIN subnet while retaining useful timer and comparator resources. A LIN transceiver remains necessary to interface the digital controller with the physical network. Power design should account for sleep-mode current, wake behavior, and the voltage tolerances of the selected automotive environment. Confirm the exact LIN channel, baud-rate settings, timer mapping, and temperature requirements before releasing the schematic.
সুপারিশকৃত
BLDC Motor Controller
The R5F10PPJKFB#V5 supports compact BLDC motor-control designs because the RL78/F14 family includes timer RD, comparator resources, and dedicated support for BLDC motor control. These peripherals can assist with commutation, input-capture timing, fault detection, and coordinated low-power motor operation. The MCU remains a 16-bit embedded controller rather than a dedicated motor-driver IC, so external gate drivers, power switches, and current-sensing circuitry are required as appropriate. Confirm the selected suffix temperature grade and validate the family features listed for the exact ordering code before using it in a safety-critical actuator.
সুপারিশকৃত
Industrial Communication Controller
The R5F10PPJKFB#V5 can serve as the central controller in an industrial communication module because it combines a 16-bit RL78/F14 processing core with integrated CAN and LIN modules. Engineers can use these interfaces for distributed sensor monitoring, actuator commands, diagnostic reporting, and local control loops. The dual communication capability permits one MCU to coordinate different network segments while managing timers, analog comparisons, and system supervision. Physical-layer transceivers and isolation or protection components must be selected for the installation environment. Firmware should include timeout handling, bus-error recovery, deterministic scheduling, and safe-state behavior for connected machinery.
সুপারিশকৃত
Automotive Body Control Module
The R5F10PPJKFB#V5 is suitable for body electronics where low consumption and integrated vehicle-network interfaces are valuable. A body-control design can use the 16-bit CPU for switch-state logic, centralized input processing, actuator coordination, and communication with CAN or LIN modules. The RL78/F14 family's timer RD and comparator resources support timing and threshold functions that commonly appear in body-control systems. Exact pin multiplexing must be mapped to the selected package, while ESD protection and transceiver selection remain board-level responsibilities. For production use, verify the ordering suffix qualification and complete the manufacturer’s electrical, timing, and reliability validation.
সুপারিশকৃত
Low-Power Embedded Appliance
The R5F10PPJKFB#V5 fits low-power embedded appliances that require more control capability than an 8-bit MCU but do not need a high-end application processor. Its 16-bit RL78/F14 architecture can coordinate user inputs, sensor readings, timers, communications, and actuator logic while the family’s low-consumption emphasis supports battery or energy-limited operation. Integrated CAN and LIN are valuable when the appliance participates in a vehicle or industrial network, although simpler products may use only a subset of peripherals. During power-budget analysis, account for active and sleep currents under the selected operating conditions. Confirm memory size, clock configuration, and package details from the exact ordering-code documentation.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা R5F10PPJKFB#V5 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | R5F10PPJKFB#H5 | R5F10PPJKFB#X5 | R5F10PPJKFB#V5Q | R5F10PPJKFB#X5Q |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | LFQFP | LFQFP - same package family | LFQFP - same package family | LFQFP - same package family | LFQFP - same package family |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Series | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 |
| CAN Interface | Built-in CAN module | Built-in CAN module | Built-in CAN module | Built-in CAN module | Built-in CAN module |
| LIN Interface | Built-in LIN module | Built-in LIN module | Built-in LIN module | Built-in LIN module | Built-in LIN module |
| BLDC Motor Control Support | Supported by RL78/F14 family | Supported by RL78/F14 family | Supported by RL78/F14 family | Supported by RL78/F14 family | Supported by RL78/F14 family |
| Ordering Suffix | V5 | H5 | X5 | V5Q | X5Q |
মূল পার্থক্যসমূহ
- Integrated CAN and LIN controllers support connected automotive and industrial nodes (বনামR5F10PPJKFB#H5)
- The V5 ordering option retains the complete RL78/F14 feature set (বনামR5F10PPJKFB#V5Q)
- Pin-compatible family ordering options support lifecycle and qualification planning (বনামR5F10PPJKFB#X5)
ডিজাইন নোট
Create the footprint from the dimensional drawing associated with the exact R5F10PPJKFB#V5 suffix rather than from the generic LFQFP name alone. Verify lead pitch, body dimensions, pin count, and exposed-pad geometry. Place the decoupling network and any oscillator components directly beside their associated pins, keep switching or motor-drive loops compact, and route communications away from sensitive analog sections. The complete numbered pin list is absent from the accessible product pages, so the manufacturer package drawing must control every PCB connection.
Treat CAN and LIN as external physical-layer interfaces even though the RL78/F14 controllers are integrated. Select suitable transceivers, provide the required protection and isolation where applicable, and follow the transceiver reference-layout guidance. Keep controller traces short and controlled, place termination only where the network topology requires it, and avoid routing bus signals beneath switching nodes or motor-power stages. Validate signal integrity and EMC behavior on the production board rather than relying on schematic connectivity alone.
Do not assume that every R5F10PPJKFB suffix has identical temperature, qualification, packing, or lifecycle characteristics. The V5, V5Q, H5, X5, and X5Q designations identify different ordering options, and the Q suffix can affect the intended grade. Before substitution, compare the Renesas ordering table, exact operating-temperature limits, qualification markings, and package dimensions. Also confirm that the flashing, debugger, and peripheral-allocation settings in the development environment match the selected device.
কমপ্লায়েন্স তথ্য
Compliance declarations and the exact status of the V5 suffix are not stated in the accessible Renesas, distributor, or datasheet-index pages. The RL78/F14 family supports automotive interfaces, but that family capability alone does not establish AEC-Q100 qualification for this exact ordering code.