R5F113GLLFB#H5 - 32MHz Automotive RL78 MCU | Renesas
MPN: R5F113GLLFB#H5 ✓ সক্রিয়R5F113GLLFB#H5 সারাংশ
An automotive microcontroller is a specialized embedded processing device that combines a CPU core, memory, timers, communication controllers, analog functions, and safety-oriented peripherals in one package. Within the embedded-control hierarchy, it belongs to the MCU and semiconductor families while adding automotive communications, low-power operation, and extended-temperature considerations for vehicle electronics.
The RL78/F15 family emphasizes efficient 16-bit processing and low standby power, making it suitable for systems that must respond to network activity while minimizing quiescent consumption. Its communication resources support CAN, LIN, and IEBus networks commonly used for vehicle body and comfort systems. A 32 MHz operating frequency provides the timing capability required for periodic control tasks, motor-control peripherals, and multi-protocol automotive communication.
The 144-pin LFQFP package exposes a large number of I/O, communication, timer, analog, and power pins. This makes the controller suitable for centralized body-control modules and electronic units that combine several vehicle functions. Renesas describes the RL78/F15 group as supporting automotive applications and enhanced motor-control functionality, including the Timer RD peripheral. The family also targets operation up to 125 °C, with a 24 MHz CPU rate specified for that high-temperature condition.
Typical applications include automotive body-control modules, door and window control units, seat and occupant-comfort controllers, CAN gateway equipment, motor-control subunits, and climate-control interfaces. The combination of CAN, LIN, IEBus, extensive I/O, and low-power operation allows one device to manage multiple electromechanical functions while maintaining a compact board footprint.
Design should account for the large exposed-ground and power-distribution requirements of a 144-pin automotive MCU. Follow the manufacturer’s package, decoupling, clock, and PCB-layout guidance, validate communication timing across all vehicle networks, and perform thermal testing at the intended ambient temperature. Firmware should also include checks for communication loss, invalid actuator commands, watchdog recovery, and safe output states.
This product page combines the manufacturer’s automotive positioning with practical architecture, application, and migration guidance. It also organizes same-family RL78/F15 candidates, package considerations, and design notes to support schematic review, PCB planning, firmware validation, and sourcing decisions.
এর জন্য ড্রপ-ইন বিকল্প R5F113GLLFB#H5 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
R5F113GKLFB#H5
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F113TGLFB#H5
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F113TLLFB#H5
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F113GJLFB#H5
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F113GMLFB#H5
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
R5F113GLLFB#H5 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 16-bit automotive microcontroller |
| Product Series | RL78/F15 |
| CPU Architecture | RL78 16-bit core |
| Maximum CPU Frequency | 32 MHz |
| High-Temperature CPU Frequency | 24 MHz at 125 °C target operation |
| Automotive Network Interfaces | Enhanced CAN, LIN, and IEBus |
| Motor-Control Peripheral | Timer RD |
| প্যাকেজ | 144-pin LFQFP, 20 mm × 20 mm |
| মাউন্টিং টাইপ | Surface mount |
| Moisture Sensitivity Level | MSL 3 |
R5F113GLLFB#H5 144-pin lfqfp, 20 mm × 20 mm পিন কনফিগারেশন গাইড
R5F113GLLFB#H5 (144-pin lfqfp, 20 mm × 20 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি R5F113GLLFB#H5.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
R5F113GLLFB#H5 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Body Control Module, CAN Gateway and Network Interface, Door and Window Control Unit, Seat and Occupant Comfort Controller, Climate Control Interface Module, Automotive Motor-Control Submodule.
Automotive Body Control Module
R5F113GLLFB#H5 fits a centralized body-control module that coordinates lamps, locks, wipers, and comfort features. Its 32 MHz RL78 CPU provides timely execution for periodic control tasks, while CAN, LIN, and IEBus interfaces support communication with distributed vehicle nodes. The 144-pin LFQFP exposes substantial I/O for switch inputs, driver outputs, and mixed-signal sensing. A low-power design remains important because parked vehicles must limit standby consumption. Firmware should include network timeout handling, debounced input processing, diagnostic counters, and safe-state initialization for actuators.
সুপারিশকৃত
CAN Gateway and Network Interface
R5F113GLLFB#H5 can serve as a gateway between automotive communication networks that require protocol coordination and local control. The RL78/F15 core operates up to 32 MHz, providing headroom for message routing, diagnostics, and supervisory logic. Enhanced CAN, LIN, and IEBus connectivity allows the module to bridge different vehicle-network segments without requiring separate interface devices. The 144-pin package also provides space for status indicators, communication isolation interfaces, and diagnostic connectors. Designers should calculate worst-case network message loads, define timeout behavior, and verify bit timing under temperature extremes.
সুপারিশকৃত
Door and Window Control Unit
R5F113GLLFB#H5 is suitable for a door, window, or tailgate control unit combining motor control with body-network communications. The 32 MHz CPU supports debouncing, position sensing, current monitoring, and motor-drive sequencing, while CAN or LIN enables commands from a body controller. Timer RD motor-control functionality can support deterministic actuator timing when its peripheral configuration matches the design. The large LFQFP pin count provides multiple inputs for limit switches and Hall sensors plus outputs for relays and motor bridges. Production firmware should include blocked-motion detection, watchdog handling, and controlled reset behavior.
সুপারিশকৃত
Seat and Occupant Comfort Controller
R5F113GLLFB#H5 supports seat-position, heating, ventilation, and occupant-comfort control modules that combine multiple low-power inputs and outputs. Its enhanced CAN and LIN connectivity allows the module to participate in vehicle networks, while the 16-bit RL78 architecture supports responsive motor sequencing and diagnostic reporting. Low-power operation is valuable in parked vehicles where continuous controller consumption influences overall standby current. The 144-pin package leaves room for switch-matrix inputs, sensor interfaces, indicator outputs, and communication transceivers. Firmware should debounce mechanical inputs and place outputs in defined safe states during reset or bus interruption.
সুপারিশকৃত
Climate Control Interface Module
R5F113GLLFB#H5 can manage a climate-control interface that receives commands over CAN or LIN and supervises fans, valves, and temperature-related sensors. The 32 MHz CPU accommodates control-loop scheduling, diagnostic routines, and communication handling in one device. A high pin count supports digital climate controls, analog sensor inputs through external conditioning, and discrete actuator outputs, while the low-power RL78 core supports reduced standby demand. Validation should cover sensor plausibility, actuator timeout, communication-loss fallback, and operation across the vehicle temperature range. Thermal performance must be checked with the final enclosure and copper layout.
সুপারিশকৃত
Automotive Motor-Control Submodule
R5F113GLLFB#H5 is applicable to distributed motor-control submodules when its Timer RD configuration, I/O count, and qualification meet the actuator requirements. The 32 MHz RL78/F15 core provides deterministic execution for PWM sequencing, position logic, and fault detection. CAN, LIN, or IEBus connectivity enables commands and status reporting to a higher-level vehicle controller. The 144-pin LFQFP supports the mix of timer outputs, sensor inputs, and communications that distributed automotive ECUs commonly require. Designers must confirm the exact motor-control peripheral map and use independent hardware shutdown paths where actuator safety requires them.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা R5F113GLLFB#H5 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | R5F113GKLFB#H5 | R5F113TGLFB#H5 | R5F113TLLFB#H5 | R5F113GJLFB#H5 | R5F113GMLFB#H5 |
|---|---|---|---|---|---|---|
| Package | LFQFP-144 (20 mm × 20 mm) | LFQFP-144 (20 mm × 20 mm) - same | 144-LFQFP - same | 144-QFP - same | LFQFP-144 - same | LFQFP-144 - same |
মূল পার্থক্যসমূহ
- Single-device integration of three vehicle-network protocols (বনামR5F113TLLFB#H5)
- 32 MHz automotive RL78/F15 processing platform (বনামR5F113TGLFB#H5)
- Large 144-pin integration in the automotive package (বনামR5F113TGLFB#H5)
- Motor-control capability within the automotive MCU (বনামR5F113TLLFB#H5)
ডিজাইন নোট
Follow the Renesas LFQFP-144 land-pattern and routing guidance exactly, including exposed-pad or thermal-via treatment where specified. Place local decoupling capacitors adjacent to the corresponding power pins, provide a low-impedance return path for every supply rail, and avoid routing high-current actuator outputs beneath sensitive communication or analog nets.
Estimate the average and peak regulator dissipation from the actual vehicle rail, MCU current, I/O load, and ambient temperature. Place a margin between calculated junction temperature and the device limit, then verify the design in the final enclosure. Include transient margin for vehicle load dump and supply disturbances rather than sizing the rail only from nominal battery voltage.
Do not treat a shared package name as proof of firmware or hardware equivalence. Before replacing R5F113GLLFB#H5, compare the complete 144-pin assignment, flash size, RAM, peripheral map, oscillator pins, reset behavior, voltage limits, temperature grade, and automotive qualification. Revalidate startup code and communication timing after any device-code change.
Keep CAN, LIN, and IEBus traces away from high-current switching nodes and motor-driver outputs. Provide short return paths for communications, use appropriate termination and protection components, and keep the MCU’s oscillator and sensitive analog pins away from noisy power inductors. Review rise time, crosstalk, and ground-current return paths on the completed layout.
Automotive firmware must continue operating safely when a communication node disappears or sends invalid commands. Implement timeout counters, plausibility checks, command sequence counters where supported, watchdog recovery, and deterministic actuator shutdown states. Hardware-level safe states remain important for windows, doors, thermal systems, and motor-driven mechanisms.
কমপ্লায়েন্স তথ্য
Renesas identifies the device for automotive applications, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is included in the cited product information.