STM32G031F6P6 - 64MHz Cortex-M0+ MCU, 32KB Flash | ST
MPN: STM32G031F6P6 ✓ সক্রিয়STM32G031F6P6 সারাংশ
A microcontroller is an integrated semiconductor that executes firmware, reads inputs, controls outputs, and manages system timing. The STM32G031F6P6 belongs to the STM32G0 mainstream MCU family and uses the Arm Cortex-M0+ processor, a 32-bit RISC architecture designed for efficient control-oriented workloads. Its combination of modest memory, fast execution, and multiple communication peripherals makes it suitable for cost-sensitive embedded products.
Verified distributor information identifies the device as a 64 MHz STM32G0 MCU with 32 KB Flash, 8 KB RAM, two USARTs, timers, an ADC, and communication interfaces. The 20-TSSOP package provides 20 pins and is supplied in tube packaging according to the Arrow listing. The verified operating-temperature range is -40 °C to +85 °C, and RoHS compliance is reported by FindMyChip.
The Cortex-M0+ core provides a practical balance between processing capability and resource consumption for embedded control. With two USARTs, designers can support serial consoles, sensors, modules, or industrial peripherals while retaining timers for periodic control tasks. The ADC enables analog measurements, and the communication interfaces expand the range of connected equipment supported by a single controller.
Typical uses include industrial control modules, compact sensor nodes, building-automation controllers, small motor-control products, and low-cost consumer devices. The 20-pin TSSOP package is useful when a small, readily available through-hole-compatible package is preferred, although the exact pin functions and exposed electrical requirements must be checked against the STMicroelectronics datasheet before layout.
When designing around the STM32G031F6P6, confirm supply-voltage tolerances, peripheral pin multiplexing, clock configuration, decoupling, programming method, and exposed-pin requirements. The verified data does not provide detailed pin names or pricing tiers for every quantity, so those values should be checked against the manufacturer datasheet and current distributor quotations before release.
এর জন্য ড্রপ-ইন বিকল্প STM32G031F6P6 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible STM32G031F6P6 (একই form factor এবং footprint) — পার্থক্য রয়েছে ADC, Communication Interfaces, Flash Memory, Mounting Type, Package.
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনSTM32G031F6P6 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Core | Arm Cortex-M0+ 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 32 KB (32K x 8) |
| RAM | 8 KB |
| Operating Voltage | 1.7 V to 3.6 V |
| প্যাকেজ | 20-pin TSSOP |
| মাউন্টিং টাইপ | Tube package |
| USART | 2 x USART |
| ADC | Available |
| Timers | Available |
| Communication Interfaces | Available |
| অপারেটিং তাপমাত্রা | -40 °C to +85 °C |
| লাইফসাইকেল স্ট্যাটাস | Active |
| RoHS | Compliant |
| MSL | Level 3 |
| Manufacturer Product Family | STM32G0 mainstream microcontrollers |
| Core Architecture | 32-bit RISC |
| Device Type | Microcontroller IC |
| Supplier Packaging | Tube |
| Lead Time | 3-7 business days |
STM32G031F6P6 20-pin tssop পিন কনফিগারেশন গাইড
STM32G031F6P6 (20-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি STM32G031F6P6.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
STM32G031F6P6 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Module, Connected Sensor Node, Building Automation Controller, Low-Cost Consumer Device, Small Motor-Control Subsystem, Serial Communication Controller.
Industrial Control Module
The STM32G031F6P6 fits compact industrial-control modules because its 64 MHz Arm Cortex-M0+ core provides responsive control processing while the 32 KB Flash and 8 KB RAM are sufficient for embedded supervisory logic. The two USARTs can connect to local operators, sensor interfaces, or downstream controllers, while the ADC supports analog process inputs. Its verified 1.7 V to 3.6 V operating range and -40 °C to +85 °C temperature specification suit equipment designed around a low-voltage 3.3 V rail. The 20-pin TSSOP package also simplifies assembly where a small through-hole-compatible footprint is preferred. Production designs should still add appropriate transient protection, input conditioning, decoupling, and isolation according to the industrial environment.
সুপারিশকৃত
Connected Sensor Node
For small sensor nodes, STM32G031F6P6 provides a practical balance of processing speed and memory without requiring a larger package. The 64 MHz Cortex-M0+ core can sample and process measurements, the ADC supports analog sensors, and the two USARTs allow connection to external sensor or radio modules. With 32 KB Flash and 8 KB RAM, the device can hold application firmware and short data buffers for local monitoring. The 1.7 V to 3.6 V supply range supports low-voltage designs, provided the complete power tree meets the device requirements. Use the manufacturer datasheet to confirm ADC characteristics, pin multiplexing, clock settings, and low-power modes before fixing the node architecture.
সুপারিশকৃত
Building Automation Controller
STM32G031F6P6 is suitable for small building-automation controllers that coordinate sensors, actuators, and service interfaces on one PCB. The dual-USART arrangement can support an internal communications link and an external service connection, while timers and the ADC help implement periodic monitoring and simple control functions. The MCU’s 32 KB Flash provides room for a focused embedded application, and 8 KB RAM is suitable for lightweight scheduling and data buffering. The 20-pin TSSOP package helps reduce board size while remaining compatible with conventional TSSOP assembly. Final designs should validate communication timing, power-supply noise, input protection, and any field-bus requirements against the exact STMicroelectronics datasheet.
সুপারিশকৃত
Low-Cost Consumer Device
The STM32G031F6P6 supports cost-sensitive consumer products that need basic embedded intelligence but not a high-end application processor. Its 64 MHz Cortex-M0+ core can manage user inputs, indicators, timers, and small serial peripherals, while the two USARTs enable configuration, logging, or connection to accessory modules. A 20-pin TSSOP package can help reduce board area and assembly cost, and the 32 KB Flash and 8 KB RAM provide a usable baseline for compact firmware. The 1.7 V to 3.6 V operating range works well with low-voltage system rails, but the designer must confirm all electrical limits and avoid relying on unverified low-power or analog specifications.
সুপারিশকৃত
Small Motor-Control Subsystem
STM32G031F6P6 can be used as the supervisory controller in a small motor-control subsystem where its role is sequencing, sensing, and protection coordination rather than driving the motor power stage directly. Timers provide periodic control timing, the ADC can monitor current or position-related signals, and the two USARTs can support a host or diagnostic connection. The 64 MHz core provides useful timing headroom for compact mixed-signal controllers. External gate drivers, transistor stages, current sensing, and protective components remain necessary. Validate timer channels, ADC input range, pin assignment, and timing behavior in the STMicroelectronics datasheet and reference designs before production.
সুপারিশকৃত
Serial Communication Controller
The STM32G031F6P6 is well suited to small serial communication controllers because it provides two USARTs along with a 64 MHz Cortex-M0+ core and 32 KB Flash. Designers can assign one USART to a local service interface and another to a sensor, actuator, or field-network transceiver. The 8 KB RAM supports lightweight buffering and protocol state machines, while the 20-pin TSSOP package keeps the footprint manageable. The MCU can supervise multiple serial tasks without the resource demands of a larger MCU. Confirm electrical levels, transceiver direction control, baud-rate tolerances, and protocol requirements in the selected companion devices and the manufacturer documentation.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা STM32G031F6P6 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Package | 20-pin TSSOP |
| Brand | STMicroelectronics |
| Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 32 KB |
| RAM | 8 KB |
| Operating Voltage | 1.7 V to 3.6 V |
| USART | 2 x USART |
| ADC | Available |
| Operating Temperature | -40 °C to +85 °C |
মূল পার্থক্যসমূহ
- Mainstream 64 MHz Arm Cortex-M0+ performance (বনামSTM32G031F4P6)
- 32 KB Flash and 8 KB RAM configuration (বনামSTM32G031F8P6)
- Two-USART communications resource (বনামLower-resource MCU alternatives)
- Compact 20-pin TSSOP package (বনামLarger-package STM32G0 devices)
ডিজাইন নোট
Design the STM32G031F6P6 supply around the verified 1.7 V to 3.6 V operating range and confirm every pin-specific voltage limit against the manufacturer datasheet. Place the required bulk and high-frequency decoupling capacitors close to the corresponding supply and ground pins, keep return-current paths short, and provide controlled sequencing if multiple rails feed the MCU. Do not infer regulator headroom from the family voltage alone; check the complete electrical limits and ADC, GPIO, and flash programming conditions.
Use the STMicroelectronics 20-pin TSSOP land pattern and verify the package drawing before routing. Keep the MCU footprint on one side of the board when possible, maintain accessible power and ground pins, and route high-current or switching-node connections away from sensitive analog and communication traces. Because the verified data does not include a pin table or exposed-pad details, do not finalize pad assignments from package name alone.
Plan USART, ADC, timer, and communication routes according to the exact pin-multiplexing table in the datasheet. Place the two USART lines to external transceivers with controlled return paths, and keep analog ADC inputs away from switching edges and high-current paths. If the design uses an external crystal, oscillator, or precision timing source, follow the required grounding, loading, and placement guidance from the manufacturer documentation.
Do not assume that every STM32G0 device is a drop-in replacement for STM32G031F6P6. The verified cross-reference material mentions related STM32G031F4P6 and STM32G031F8P6 devices, but it does not prove identical pinout, memory, peripherals, or firmware behavior. Before substituting, compare the package drawing, pin names, alternate functions, supply limits, clock setup, memory map, interrupt vector table, and boot/programming requirements.
The verified search data does not state maximum junction temperature, package thermal resistance, or power dissipation for STM32G031F6P6. Use the manufacturer thermal information and the actual switching activity, supply voltage, ambient temperature, and PCB copper area to evaluate thermal margin. For low-power embedded-control applications, measure the real operating profile rather than inferring thermal performance from the 64 MHz clock rating alone.
কমপ্লায়েন্স তথ্য
RoHS compliance and MSL Level 3 are reported by the verified FindMyChip and PartGenie search results. The supplied data does not verify REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.