TAS5182DCA - 100W Stereo Class-D Controller | Texas Instruments
MPN: TAS5182DCA ✓ সক্রিয়TAS5182DCA সারাংশ
A Class-D audio power-stage controller is a semiconductor that processes a digital audio input and generates PWM drive signals for external H-bridge transistors. Unlike a conventional analog-output audio amplifier, the controller leaves power amplification to external MOSFETs, allowing output capability to scale with the selected power stage. It belongs to the digital audio amplifier and power-management IC hierarchy.
The TAS5182DCA supports stereo operation at up to 2 × 100 W RMS into a 6 Ω bridge-tied load when paired with an appropriate external power stage. Its typical total harmonic distortion plus noise is below 0.15% under the conditions identified in the manufacturer documentation. PWM input and a 0 V to 34 V supply range suit higher-power consumer and professional audio architectures.
Because TAS5182DCA is a controller rather than a self-contained power amplifier, its realized output power depends on external transistors, gate-drive implementation, supply capability, layout, thermal management, and speaker impedance. The IC controls the digital audio path while the external power devices carry the loudspeaker current. This division improves flexibility compared with integrating the output transistors into the controller package.
Typical uses include stereo loudspeaker systems, powered speakers, home-theater receivers, professional audio racks, and compact consumer audio products. The 56-HTSSOP package supports high-density PCB layouts, while the exposed thermal pad provides a thermal connection to the board copper. The 0°C to 70°C rating targets commercial ambient environments rather than extended industrial or automotive temperature ranges.
Careful power-stage layout is essential because switching currents and gate-drive timing directly affect distortion, thermal performance, and EMI. Keep high-current power loops compact, provide local supply decoupling, use low-inductance gate-drive paths, and connect the thermal pad to an appropriately sized copper area. Select the external MOSFETs and output filter against the intended load and switching requirements.
This product record combines the controller’s principal operating characteristics with application guidance, verified package information, and drop-in replacement analysis. It also distinguishes the IC’s fixed control function from the variable output power contributed by the external transistor stage, helping engineers evaluate the complete amplifier rather than relying on the nominal controller rating alone.
এর জন্য ড্রপ-ইন বিকল্প TAS5182DCA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
TAS5182DCAR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TAS5182IDCA
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TAS5182DCAG4
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TAS5182DCA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Stereo digital amplifier power-stage controller |
| Amplifier Class | Class D |
| Channel Count | 2 channels |
| Maximum Stereo Output Power | 100 W per channel at 6 Ω |
| Maximum Mono Output Power | 200 W |
| Supply Voltage Range | 0 V to 34 V |
| Input Signal Type | PWM input |
| আউটপুট কনফিগারেশন | Stereo H-bridge controller |
| Typical THD+N | < 0.15% under specified manufacturer test conditions |
| অপারেটিং তাপমাত্রার পরিসর | 0°C to 70°C |
| প্যাকেজ | 56-pin HTSSOP |
| মাউন্টিং টাইপ | Surface mount |
| Thermal Pad | Exposed pad |
| Control Interface | PWM input |
TAS5182DCA 56-pin htssop পিন কনফিগারেশন গাইড
TAS5182DCA (56-pin htssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TAS5182DCA.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
TAS5182DCA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Powered Stereo Speaker, Home-Theater Stereo Amplifier, Professional Audio Amplifier, Compact Speaker System, Digital Audio Power Module, Multi-Channel Audio System.
Powered Stereo Speaker
The TAS5182DCA fits a powered-speaker architecture that converts a PWM audio stream into high-power bridge-tied drive for external MOSFETs. Its controller ratings support 2 × 100 W RMS into 6 Ω loads, giving the system designer a clear target for the power stage. The external transistors determine current handling and efficiency, while the 56-pin HTSSOP controller requires a compact, carefully decoupled layout. A robust design must include speaker protection, an output filter matched to the switching stage, adequate copper for thermal conduction, and fault handling appropriate to the selected power devices.
সুপারিশকৃত
Home-Theater Stereo Amplifier
TAS5182DCA is appropriate for a stereo home-theater power amplifier that accepts PWM audio and drives 4 Ω or 6 Ω speakers through an external power stage. The controller supports up to 100 W per channel at 6 Ω and operates with a supply range extending to 34 V, matching many high-output consumer amplifiers. Integration should account for channel matching, low-level input conditioning, output filtering, and heat removal from both the MOSFETs and the controller’s exposed pad. EMI performance depends on keeping switching current loops compact and separating sensitive audio input paths from the power stage.
সুপারিশকৃত
Professional Audio Amplifier
The TAS5182DCA can serve as the digital power controller in a professional stereo amplifier when the external transistor stage is designed to meet the required output power and thermal limits. Its 2 × 100 W RMS capability at 6 Ω provides a useful framework for compact professional loudspeaker drives. Typical THD+N below 0.15% under specified conditions makes the device relevant to quality audio designs, but the complete amplifier must be evaluated for clipping behavior, output impedance, protection, thermal stability, and electromagnetic interference. Commercial ambient operation is specified from 0°C to 70°C.
সুপারিশকৃত
Compact Speaker System
TAS5182DCA is suitable for compact stereo speaker systems where a controller-based architecture provides flexibility in output-device selection. Rather than fixing the loudspeaker current inside the IC, the controller allows the design engineer to choose external MOSFETs according to impedance, peak power, thermal budget, and conduction loss. This is useful when one amplifier platform must address different speaker loads. The implementation must preserve clean PWM signaling, use effective output filtering, and provide enough board copper for the controller and power devices to sustain continuous operation without excessive temperature rise.
সুপারিশকৃত
Digital Audio Power Module
The TAS5182DCA can form the core of a modular digital audio output stage that receives PWM audio from a codec or DSP. This separation allows signal conversion, volume control, EQ, and protection to operate upstream while the controller and external transistors provide the loudspeaker drive. The 0 V to 34 V supply capability supports multiple external power-stage configurations, including the documented 100 W stereo and 200 W mono operating targets. Module designers must define the PWM interface timing and signal levels, provide local decoupling, and account for the package’s exposed thermal pad when integrating it into a higher-level board.
সুপারিশকৃত
Multi-Channel Audio System
TAS5182DCA can be used as a stereo building block in a multi-channel amplifier system, with each section using synchronized PWM audio and its own external power stage. The controller’s 2-channel architecture simplifies balanced left/right implementation, while the 34 V maximum supply provides a broad design range for the downstream transistors. System-level considerations include channel-to-channel delay matching, independent protection, fault isolation, shared cooling, and adequate supply decoupling. The 56-pin HTSSOP footprint supports dense construction, but power-stage layout and thermal design remain the dominant constraints in high-channel-count products.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TAS5182DCA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | TAS5182DCAR | TAS5182IDCA | TAS5182DCAG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 56-HTSSOP | 56-HTSSOP | 56-HTSSOP | 56-HTSSOP |
| Stereo Output Power | 100 W per channel at 6 Ω | 100 W per channel at 6 Ω | 100 W per channel at 6 Ω | 100 W per channel at 6 Ω |
| Mono Output Power | 200 W | 200 W | 200 W | 200 W |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V | 0 V to 34 V | 0 V to 34 V |
| Input Type | PWM input | PWM input | PWM input | PWM input |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Typical THD+N | < 0.15% under specified test conditions | < 0.15% under specified test conditions | < 0.15% under specified test conditions | < 0.15% under specified test conditions |
| Output Configuration | Stereo H-bridge controller | Stereo H-bridge controller | Stereo H-bridge controller | Stereo H-bridge controller |
মূল পার্থক্যসমূহ
- High stereo power target in a controller-based architecture (বনামTAS5182DCAR)
- Same mono and stereo power envelope across the replacement family (বনামTAS5182IDCA)
- Pin-compatible family option with the same 34 V supply ceiling (বনামTAS5182DCAG4)
ডিজাইন নোট
Separate the PWM control path from the high-current switching loops. Route gate-drive traces directly to the external MOSFETs, keep the controller supply bypass capacitors close to their pins, and provide a continuous low-impedance ground reference. The external source-current return should not share narrow paths with the controller’s sensitive signal ground. This separation reduces switching-node coupling, ground bounce, and unwanted PWM distortion.
Connect the exposed thermal pad to a continuous PCB ground-copper area using the manufacturer’s recommended via pattern. Thermal performance depends on both this controller and the external power transistors, so calculate their combined heat dissipation at maximum continuous output. Keep the power stage away from temperature-sensitive circuitry and use a copper area or heat-spreader arrangement that supports the required ambient range without exceeding device junction limits.
Do not interpret the 100 W stereo rating as a specification for the controller package alone. The external MOSFETs, gate resistance, supply impedance, output filter, PCB copper, and speaker load determine the achievable continuous power. Verify the full manufacturer reference design and worst-case thermal and electrical limits before committing to a production power stage, especially for sustained near-limit playback.
Use the shortest practical switching-current loop and consider the influence of the exposed-pad and power-ground topology on radiated emissions. Select the output-filter components using the manufacturer’s guidance for the intended switching behavior and load. Conduct pre-compliance EMC measurements with the final enclosure, cables, speaker loads, and external power-stage layout because changes at the connector or chassis can materially alter emissions.
কমপ্লায়েন্স তথ্য
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. AEC-Q100 is not applicable to the documented commercial-temperature application unless the manufacturer explicitly offers a qualified suffix.
