Texas Instruments

THS3062DDA - 300MHz Dual CFA | Texas Instruments

MPN: THS3062DDA ✓ সক্রিয়
±5 V to ±15 V Vdss 8-pin SO PowerPAD Package Less than 0.3 dB Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

THS3062DDA সারাংশ

The Texas Instruments THS3062DDA is a dual, high-voltage, high-slew-rate current-feedback amplifier with a 300 MHz unity-gain bandwidth, 7000 V/us slew rate, and operation from ±5 V to ±15 V, packaged in an 8-pin SO PowerPAD configuration. The integrated PowerPAD provides a thermal path for the high-bandwidth dual amplifier while preserving the familiar surface-mount SOIC footprint.

A current-feedback amplifier is a voltage-amplifier architecture optimized for high-speed closed-loop operation. Unlike the voltage-feedback topology, a current-feedback amplifier controls output current through its feedback loop, enabling large bandwidth and slew-rate performance with low signal distortion. In the broader component hierarchy, the THS3062DDA is an operational amplifier, analog signal-conditioning IC, and power-management-independent analog building block used between sensors, converters, and loads.

The THS3062 family provides a 0.1 dB flat bandwidth beyond 100 MHz and less than 0.3 dB of frequency-response peaking in unity gain. These characteristics make the devices suitable for wideband buffers, video drivers, waveform-generation circuits, video distribution, and communications equipment. Their dual-channel configuration also permits parallel signal paths or differential driver arrangements where channel-to-channel matching and compact implementation are valuable.

The amplifier uses Texas Instruments BICOM-1 process technology and a current-feedback architecture. This architecture supports the 7000 V/us slew rate, allowing large voltage transitions through low-resistance loads with reduced distortion. The 300 MHz unity-gain bandwidth is particularly useful for wideband signal conditioning, while the low peaking specification helps maintain frequency-response stability in closed-loop designs.

Typical applications include high-speed video buffering, professional audio and instrumentation signal chains, communications transceivers, test-equipment output drivers, and general-purpose wideband amplifiers. In video systems, the amplifier can preserve amplitude and phase relationships across a broad frequency range. In instrumentation, its rapid slew rate supports accurate reproduction of fast-edge signals and reduces output distortion.

PCB design requires careful treatment of the exposed thermal pad, supply-return path, and high-speed feedback connections. Place the PowerPAD over a low-impedance ground plane, use short feedback traces, and maintain decoupling capacitance close to the supply pins. Avoid routing sensitive input and feedback nets beneath the package or beside unrelated switching circuitry to minimize parasitic coupling.

This product page combines the principal electrical and packaging characteristics with pin-oriented design guidance, application guidance, comparison parameters, and compatibility information for engineers evaluating high-speed current-feedback amplifier upgrades.

এর জন্য ড্রপ-ইন বিকল্প THS3062DDA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible THS3062DDA (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Package, Process Technology, Slew Rate.

Texas Instruments
Amplifier Type: Dual current-feedback operational amplifier
Package: 8-pin SOIC
Process Technology: Texas Instruments BICOM-1
এর সাথে তুলনা করুন THS3062DDA →
Texas Instruments
Amplifier Type: Dual current-feedback operational amplifier
Package: 8-pin SOIC
Process Technology: Texas Instruments BICOM-1
এর সাথে তুলনা করুন THS3062DDA →

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

THS3062DDA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Current-feedback amplifier
Number of Channels 2 channels
Unity-Gain Bandwidth 300 MHz
Slew Rate 7000 V/us
0.1 dB Flat Bandwidth Beyond 100 MHz
Unity-Gain Frequency Response Peaking Less than 0.3 dB
Supply Voltage Range ±5 V to ±15 V
Process Technology BICOM-1
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
প্যাকেজ 8-pin SO PowerPAD
Package Width 3.90 mm
Package Pitch 1.27 mm
পিন সংখ্যা 8 pins
মাউন্টিং টাইপ Surface mount
Termination Through-hole PowerPAD thermal connection

THS3062DDA 1.27 mm পিন কনফিগারেশন গাইড

THS3062DDA (1.27 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

THS3062DDA-এর জন্য 1.27 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি THS3062DDA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

THS3062DDA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Speed Video Buffering, Wideband Instrumentation, Communications Signal Conditioning, Professional Audio Output Driver, High-Speed Test Equipment, Waveform Generation and Reproduction.

📺

High-Speed Video Buffering

The THS3062DDA is well suited to video-buffer and video-distribution circuits because the Texas Instruments manufacturer datasheet specifies a 300 MHz unity-gain bandwidth and a 0.1 dB flat bandwidth extending beyond 100 MHz. Its 7000 V/us slew rate allows large transition amplitudes to be reproduced with low distortion. The amplifier can drive downstream acquisition, monitoring, and display circuitry while preserving signal amplitude and phase. Place the device close to the source and load, use short feedback traces, and provide a continuous ground plane beneath the exposed PowerPAD. Supply bypass capacitors should be placed directly beside the power terminals. Because the current-feedback network influences stability, use the resistor and capacitor values shown in the manufacturer application guidance and avoid adding long breakout leads that increase parasitic inductance.

🔧

Wideband Instrumentation

Fast-edge instrumentation signals require an amplifier with both wide bandwidth and rapid slew capability. The THS3062DDA combines a 300 MHz unity-gain bandwidth with a 7000 V/us slew rate, allowing sensor signals and waveform-generator outputs to retain large-amplitude transitions. According to the Texas Instruments manufacturer datasheet, unity-gain peaking remains below 0.3 dB, which supports predictable behavior in carefully compensated feedback networks. The dual package can serve two measurement channels or implement a differential arrangement. Keep input and feedback routing compact, terminate unused channels according to the manufacturer guidance, and connect the exposed pad to the ground reference with minimal thermal resistance. Validate stability with the intended source impedance, load, probe, and cable because real instrumentation systems often introduce capacitance that can alter high-frequency response.

🌐

Communications Signal Conditioning

The THS3062DDA can condition intermediate-frequency or wideband communications signals that require substantial output-current capability and low distortion. Its 7000 V/us slew rate supports rapid signal transitions, while the 300 MHz unity-gain bandwidth provides ample closed-loop headroom for many buffer and driver topologies. The dual amplifier configuration allows both I and Q paths to be handled in a compact area, which is useful when channel matching matters. Power-supply routing must prevent modulation of the signal path through shared impedance, so separate high-frequency bypass capacitors should serve each supply pin and the PowerPAD should connect to a low-inductance ground region. Control trace length around the device and keep the feedback loop physically small. Confirm output swing, load current, and stability against the actual mixer, transceiver, or filter termination before release.

🎧

Professional Audio Output Driver

The THS3062DDA can serve as a low-distortion output driver in audio equipment, test systems, and active signal-conditioning products. Its 7000 V/us slew rate handles large output transitions while the 300 MHz unity-gain bandwidth provides substantially more bandwidth than required by most audible-frequency audio signals. This headroom supports low distortion and consistent behavior with practical feedback networks. The dual configuration may drive left and right channels or provide separate drive and monitor paths. Stable operation depends on the output load, so test the intended impedance and capacitive loading. Place output-current feedback elements close to the amplifier, avoid sharing narrow return paths between channels, and provide adequate copper around the PowerPAD for heat removal. Decoupling should be selected for the full signal bandwidth rather than only the audio range.

🖥️

High-Speed Test Equipment

The THS3062DDA is appropriate for wideband test-equipment front ends where signal generators, digitizers, or network analyzers require accurate buffering. The 300 MHz unity-gain bandwidth and beyond-100 MHz 0.1 dB flat bandwidth preserve amplitude across a broad measurement range, while the 7000 V/us slew rate reduces edge-related distortion. Its dual architecture supports two channels in instruments requiring matched paths. The exposed PowerPAD must be tied to a low-impedance ground plane to lower parasitic inductance and remove heat generated by the amplifiers. Keep feedback components adjacent to the device, use short output routes, and account for connector and cable capacitance when selecting compensation. Validate gain, phase, and stability with the complete source and load arrangement because the current-feedback amplifier’s response depends on those external conditions.

📡

Waveform Generation and Reproduction

Fast waveform generators and pulse systems benefit from an output amplifier that can reproduce steep edges without excessive slew distortion. The THS3062DDA provides a 7000 V/us slew rate and 300 MHz unity-gain bandwidth, enabling the two channels to drive instrumentation, modulation, or test loads with limited distortion. According to the Texas Instruments manufacturer datasheet, the low unity-gain peaking helps maintain a controlled response. Use the device’s dual channels for complementary or differential outputs only when the load and feedback arrangements are designed for that use. Keep supply and ground returns robust enough for the dynamic output current, place the exposed thermal pad over uninterrupted copper, and minimize feedback-loop length. Check output-current compliance, output-voltage swing, and capacitive-load stability for every waveform fixture before deployment.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

THS3062DDA Texas Instruments ব্যবহৃত হয়: High-Speed Video Buffering, Wideband Instrumentation, Communications Signal Conditioning, Professional Audio Output Driver, High-Speed Test Equipment, Waveform Generation and Reproduction OPA2691 Current-feedback amplifier alternative discussed for the THS3062 family ব্যবহৃত হয়: High-Speed Video Buffering, Waveform Generation and Reproduction OPA2694 Current-feedback amplifier alternative discussed for the THS3062 family ব্যবহৃত হয়: Wideband Instrumentation, Communications Signal Conditioning OPA2684 Current-feedback amplifier alternative discussed for the THS3062 family ব্যবহৃত হয়: Professional Audio Output Driver THS3122 Texas Instruments high-speed amplifier family discussed for alternatives ব্যবহৃত হয়: High-Speed Test Equipment
What is the THS3062DDA?
The THS3062DDA is a dual, high-voltage, high-slew-rate current-feedback operational amplifier optimized for wideband signal conditioning. According to the Texas Instruments THS3062 manufacturer datasheet, the device provides a 300 MHz unity-gain bandwidth, 7000 V/us slew rate, and supply operation from ±5 V to ±15 V. Its two amplifiers are housed in an 8-pin SO PowerPAD package for high-speed, surface-mount signal chains.
What are the key specifications of THS3062DDA?
The THS3062DDA combines two current-feedback amplifiers, a 300 MHz unity-gain bandwidth, a 7000 V/us slew rate, and ±5 V to ±15 V supply capability. According to the Texas Instruments manufacturer datasheet, its 0.1 dB flat bandwidth extends beyond 100 MHz, while unity-gain frequency-response peaking remains below 0.3 dB. The device uses BICOM-1 process technology and an 8-pin SO PowerPAD package.
Where can I download the THS3062DDA datasheet PDF?
The THS3062DDA datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/product/THS3062 and through the linked manufacturer PDF at https://pdf.digi-electronics.com/pdf/2579/THS3062DDA-datasheet.pdf. Use the pin-description table and package drawings for PCB implementation, especially because the exposed PowerPAD must be connected to the intended ground plane.
Where is the THS3062DDA pinout?
The THS3062DDA pinout is shown in the pin-configuration section of the Texas Instruments THS3062 manufacturer datasheet. The device uses an 8-pin SO PowerPAD package, with the exposed thermal pad serving as a thermal and electrical connection rather than a ninth signal pin. Assign tracks according to the datasheet diagram rather than inferring connections from a generic SOIC footprint.
Is the THS3062DDA suitable for high-speed video?
The THS3062DDA is suitable for wideband video buffering because its unity-gain bandwidth is 300 MHz and its 0.1 dB flat bandwidth extends beyond 100 MHz. The current-feedback architecture and 7000 V/us slew rate also support large output transitions with low distortion. Video designs should still use short feedback paths, a continuous ground plane, and careful output-load matching.
What power supply voltage does THS3062DDA require?
The THS3062DDA operates from ±5 V to ±15 V. According to the Texas Instruments manufacturer datasheet, this range enables bipolar output swings for high-voltage signal chains while supporting common positive and negative supply arrangements. Decoupling capacitors should be positioned close to the supply pins, and the PowerPAD connection should be designed to provide a low-impedance return path.
How much bandwidth does THS3062DDA have?
The THS3062DDA has a 300 MHz unity-gain bandwidth and a 0.1 dB flat bandwidth reaching beyond 100 MHz. According to the Texas Instruments manufacturer datasheet, its unity-gain response exhibits less than 0.3 dB of peaking, which supports predictable closed-loop behavior in high-speed buffer and distribution circuits. Actual usable bandwidth also depends on gain, feedback resistance, load, and PCB parasitics.
Why is the THS3062DDA a current-feedback amplifier?
The THS3062DDA uses current feedback, meaning the amplifier’s output-current behavior is governed by the feedback network. This architecture supports wide bandwidth and high slew rate with low distortion. According to the Texas Instruments manufacturer datasheet, the resulting 300 MHz unity-gain bandwidth and 7000 V/us slew rate make the device effective for high-speed buffers and signal drivers.
When should I choose THS3062DDA over a lower-speed amplifier?
Choose the THS3062DDA when the signal path requires wide bandwidth, rapid output transitions, or low distortion at video and communications frequencies. Its 300 MHz unity-gain bandwidth and 7000 V/us slew rate exceed typical general-purpose amplifiers. A lower-speed device may be preferable when bandwidth and edge rate are unimportant, but it may distort or attenuate fast signals.
When should I choose THS3062DDA over THS3122?
Choose THS3062DDA when you need a dual current-feedback amplifier with a 300 MHz unity-gain bandwidth and 7000 V/us slew rate. According to the Texas Instruments manufacturer datasheet, the THS3062DDA also specifies less than 0.3 dB of unity-gain peaking. A final choice between the two amplifier families should include output-current capability, supply range, stability with the selected feedback network, and package thermal requirements.
Is THS3062DDA the same as THS3062DR?
The THS3062DDA is not a package-identical substitute for THS3062DR because the DDA version uses an 8-pin SO PowerPAD package, while the THS3062DR comparison identifies an 8-pin SOIC configuration without the same exposed thermal pad. Although both belong to the THS3062 family, the physical thermal-pad arrangement differs, so a PCB redesign may be required.
What can replace THS3062DDA?
The closest direct replacement must use the same 8-pin SO PowerPAD footprint, maintain pin-to-pin compatibility, and preserve the required bandwidth, slew rate, supply range, and output-current capability. The reviewed cross-reference results identify several THS3062 family options, but they differ in thermal-pad construction or ordering suffix. No alternate in the reviewed results meets the strict requirement for a distinct, non-packaging drop-in replacement.
What is the best drop-in replacement for THS3062DDA?
No distinct drop-in replacement can be confirmed from the reviewed cross-reference results because the candidates either change the exposed-pad arrangement or represent packaging or grade suffixes of the THS3062 family. A valid replacement must preserve the 8-pin SO PowerPAD land pattern and provide comparable 300 MHz-class bandwidth, 7000 V/us-class slew performance, and ±5 V to ±15 V operation.
Where can I buy THS3062DDA online?
Use the Request a Quote form on this page to request current THS3062DDA pricing, stock confirmation, minimum order quantity, and lead time. The form is the appropriate channel for obtaining a transaction-ready quotation for the exact 8-pin SO PowerPAD ordering code. Current commercial availability should be confirmed at the time of the request because inventory and lead time can change.
What is the price of THS3062DDA?
Use the Request a Quote form on this page for the current THS3062DDA unit and volume pricing. The form requests the exact MPN, THS3062DDA, so the quotation can reflect the correct 8-pin SO PowerPAD configuration rather than a related package suffix. Current price, stock, minimum order quantity, and delivery timing should be confirmed through that request.
Is THS3062DDA in stock and what is its lead time?
Confirm THS3062DDA inventory and lead time through the Request a Quote form on this page. Stock status and production lead time can vary by quantity and date, so a prompt response should be requested for the required order quantity. The Texas Instruments product page identifies the device as a current THS3062 family product, but a transactional confirmation is still required for a specific shipment.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা THS3062DDA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the THS3062DDA when the design needs a dual current-feedback amplifier with a 300 MHz unity-gain bandwidth, 7000 V/us slew rate, and operation from ±5 V to ±15 V. Its 8-pin SO PowerPAD package makes it appropriate for high-speed video, communications, instrumentation, audio-driver, and test-equipment circuits where fast edges and wide bandwidth matter. Select THS3062DR only when its conventional 8-pin SOIC construction is appropriate and the PCB lacks a compatible exposed-pad land pattern. Review THS3122, OPA2691, OPA2694, and OPA2684 when comparing amplifier architectures, but verify supply range, output current, feedback values, stability, and exact package dimensions before using any of them as a physical replacement. For a drop-in PCB substitution, the footprint and thermal-pad implementation must match exactly; changing only the amplifier family is not sufficient.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Amplifier Type Current-feedback amplifier
Number of Channels 2 channels
Unity-Gain Bandwidth 300 MHz
Slew Rate 7000 V/us
0.1 dB Flat Bandwidth Beyond 100 MHz
Supply Voltage Range ±5 V to ±15 V
Operating Temperature Range -40°C to +85°C
Package 8-pin SO PowerPAD
Brand Texas Instruments
Process Technology BICOM-1

মূল পার্থক্যসমূহ

  • Wideband current-feedback performance (বনামTHS3062DR)
  • Flat high-frequency response (বনামTHS3062D)
  • Integrated PowerPAD thermal path (বনামTHS3062DDAG3)

ডিজাইন নোট

Connect the exposed PowerPAD to a low-impedance ground plane using a short, uninterrupted thermal path. The 8-pin SO PowerPAD package provides substantially more heat-dissipation capability than a conventional 8-pin SOIC, but performance still depends on PCB copper area, thermal vias, airflow, and adjacent heat sources. Place thermal vias beneath the pad when the board fabrication process permits, while observing the manufacturer’s via and soldering guidance.

Use the shortest practical feedback loop and place feedback resistors and compensation capacitors adjacent to the amplifier pins. Current-feedback amplifiers can be sensitive to parasitic capacitance introduced by long traces and breadboards. Route input, feedback, and output paths away from power inductors and high-current switching nodes. A continuous reference plane under the device is preferable to fragmented copper or a split plane beneath the package.

Place supply bypass capacitors immediately beside the THS3062DDA supply pins and connect them through short traces to the ground reference. Use separate high-frequency decoupling paths for each amplifier where practical. Because the device supports ±5 V to ±15 V supplies, verify absolute supply limits, output swing, and load current during worst-case operating conditions before finalizing the power architecture.

Do not substitute the THS3062DDA directly for an 8-pin SOIC version without checking the exposed-pad land pattern. The DDA package includes an SO PowerPAD, and omitting its electrical or thermal connection can impair operation and heat dissipation. Also follow the manufacturer’s recommended feedback values and unused-channel configuration rather than assuming a conventional voltage-feedback amplifier network is interchangeable.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance declarations for RoHS, REACH, AEC-Q100, lead-free construction, halogen-free construction, and conflict minerals were not identified in the referenced product information. Confirm the current declarations with Texas Instruments for the exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

THS3062DDA datasheet THS3062DDA pinout THS3062DDA datasheet pdf THS3062DDA specifications THS3062DDA replacement THS3062DDA equivalent THS3062DDA cross reference THS3062DDA application circuit THS3062DDA video buffer THS3062DDA 300MHz amplifier Texas Instruments THS3062DDA THS3062DDA price THS3062DDA stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments THS3062DDA THS3062 THS3062DR THS3062D THS3062DDAG3 THS3062DDAR THS3122 OPA2691 OPA2694 OPA2684 current-feedback amplifier operational amplifier analog signal-conditioning IC BICOM-1 process PowerPAD SOIC surface-mount package unity-gain bandwidth slew rate 0.1 dB flat bandwidth wideband video buffering communications signal conditioning instrumentation amplifier
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন