TLV2434ID - 10V 500kHz Quad R-R Op Amp | Texas Instruments
MPN: TLV2434ID ✓ সক্রিয়TLV2434ID সারাংশ
An operational amplifier is a voltage-controlled, high-gain analog building block used to amplify weak signals, buffer impedance mismatches, compare voltages, perform active filtering, and drive downstream circuitry. Within the power-management and signal-processing hierarchy, the TLV2434ID belongs to the CMOS operational-amplifier family and combines four amplifier channels with low-voltage operation and rail-to-rail output capability.
Key features include a 10 V supply rating, 500 kHz gain-bandwidth product, rail-to-rail output operation, and an extended common-mode input range. The rail-to-rail output allows the output voltage to approach the supply rails more closely than a conventional amplifier whose swing is restricted by saturation limits. The four-channel arrangement reduces package count and simplifies PCB routing when a design requires several similar analog functions.
The TLV2434ID is a low-voltage CMOS op amp rather than a high-voltage bipolar amplifier. Its rail-to-rail behavior is particularly useful for sensor interfaces, portable instrumentation, battery-powered measurement systems, and signal-conditioning circuits operating from a low-voltage supply. Four independent channels can be used for filtering, buffering, gain stages, or active-feedback sensor conditioning.
Typical applications include bridge-based sensor signal conditioning, low-level audio and communication interfaces, current monitoring, analog measurement front ends, active filters, and multi-channel test equipment. When designing around the device, confirm that input and output voltages remain within the common-mode and output-swing limits for the selected supply. Decoupling capacitors should be placed close to the supply pins, while sensitive inputs require short traces and a low-noise ground return.
This product page combines the manufacturer’s device description, package information, cross-reference findings, application guidance, and engineering-focused selection criteria to support faster sourcing and board-level planning for the TLV2434ID.
এর জন্য ড্রপ-ইন বিকল্প TLV2434ID — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
TLV2434AID
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV2434AIDR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV2434AIP
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV2434AIPR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV2434IP
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TLV2434ID সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Amplifier Type | Quad operational amplifier |
| Number of Channels | 4 channels |
| Technology | CMOS |
| Maximum Supply Voltage | 10 V |
| Gain-Bandwidth Product | 500 kHz |
| Output Swing | Rail-to-rail |
| Common-Mode Input Range | Extended common-mode input range |
| Low-Supply Operation | 4.5 V minimum for 5 V single-supply operation |
| Input Phase Inversion | No phase inversion |
| প্যাকেজ | 14-pin SOIC |
| Package Family | SOIC-14 |
| মাউন্টিং টাইপ | Surface mount |
TLV2434ID soic-14 পিন কনফিগারেশন গাইড
TLV2434ID (soic-14 প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TLV2434ID.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
TLV2434ID এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Bridge Sensor Signal Conditioning, Battery-Powered Instrumentation, Low-Level Audio Interface, Active Filtering and Conditioning, Current Monitoring and Control Loops, Communication Signal Conditioning.
Bridge Sensor Signal Conditioning
The TLV2434ID fits multichannel bridge-sensor front ends that require four similar amplifier channels in a compact 14-pin SOIC. Its 500 kHz gain-bandwidth product provides useful bandwidth for low-frequency strain, pressure, and temperature measurement stages, while the extended common-mode input range helps accommodate sensor outputs that vary around a mid-supply reference. Two channels can form an instrumentation-style differential amplifier when resistor ratios are matched, and the other two can provide gain or filtering. Because a resistive bridge may produce only millivolt-level signals, offset voltage, input bias current, noise, and common-mode error must be checked against the required measurement resolution before setting the closed-loop gain.
সুপারিশকৃত
Battery-Powered Instrumentation
The TLV2434ID is suitable for portable instrumentation operating from a low-voltage supply because it combines four CMOS amplifier channels with rail-to-rail output behavior. The rail-to-rail output stage can provide more of the available signal range to an ADC or downstream sensor interface than a conventional non-rail-to-rail amplifier. Its 500 kHz gain-bandwidth product supports modest-bandwidth measurement channels without requiring a high-speed amplifier. Four channels also reduce the number of packages needed for buffering, filtering, thresholding, and gain stages. The power budget should still be evaluated at the intended supply voltage, and input common-mode voltage must remain valid throughout battery discharge and recharge conditions.
সুপারিশকৃত
Low-Level Audio Interface
The TLV2434ID can provide input buffering and gain for low-level audio or communication signals when a compact multichannel solution is needed. Its 500 kHz gain-bandwidth product is appropriate for the audio-band range rather than high-speed signal recovery, and the rail-to-rail output can drive a subsequent converter or line-stage input more effectively across a low-voltage supply. Four channels allow left and right signal paths to be handled in one package, with spare channels used for microphone preamplification or active filtering. The circuit should include input-bias return paths, suitable coupling capacitors, and output isolation to prevent the amplifier from driving capacitive loads excessively.
সুপারিশকৃত
Active Filtering and Conditioning
The TLV2434ID supports multichannel active-filter and analog-conditioning designs where several amplifier sections are required on a limited PCB area. The four channels can implement low-pass, high-pass, or second-order active filter sections, along with gain and buffering functions, while the 500 kHz gain-bandwidth product provides useful loop gain for moderate-frequency designs. Rail-to-rail output behavior improves usable signal swing on low-voltage supplies, and the extended common-mode range offers additional flexibility in biasing. Component tolerances and amplifier noise directly affect filter accuracy, so simulation should account for the selected resistor network and the manufacturer’s recommended compensation and stability conditions.
সুপারিশকৃত
Current Monitoring and Control Loops
The TLV2434ID can implement current-to-voltage amplification, threshold comparison, and feedback functions in industrial monitoring systems. Its rail-to-rail output enables the amplified sensor signal to use more of the available supply range, while four channels support multiple monitored rails or a combination of sensing, filtering, and drive functions. The 500 kHz gain-bandwidth product is suitable for many control and monitoring loops whose bandwidth is well below that limit. Layout should keep high-current paths separate from the input side of the amplifier, use a low-impedance ground reference, and account for input offset when resolving small control errors. Power-supply decoupling remains essential to prevent supply disturbance from appearing as signal error.
সুপারিশকৃত
Communication Signal Conditioning
The TLV2434ID can condition low-level communication signals before digitization or relay between sensors and interface circuitry. Its four independent channels permit repeated receiver buffering, filtering, gain, and threshold stages within one package, helping reduce board area. The 500 kHz bandwidth covers many baseband and low-speed control signals, while the extended common-mode range can simplify biasing around a mid-supply reference. Rail-to-rail output supports downstream converters operating from the same limited supply. Designers should still control input capacitance and routing to preserve stability, use termination appropriate to the signal source, and avoid treating the amplifier as a substitute for a dedicated high-speed line driver.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2434ID — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | TLV2434AID | TLV2434AIDR | TLV2434AIP | TLV2434AIPR | TLV2434IP |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Quad | Quad | Quad | Quad | Quad | Quad |
| Maximum Supply Voltage | 10 V | 10 V | 10 V | 10 V | 10 V | 10 V |
| Gain-Bandwidth Product | 500 kHz | 500 kHz class | 500 kHz class | 500 kHz class | 500 kHz class | 500 kHz class |
| Output Swing | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Common-Mode Input Range | Extended | Extended | Extended | Extended | Extended | Extended |
| Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
মূল পার্থক্যসমূহ
- Four channels in one 14-pin SOIC (বনামTLV2402ID)
- 500 kHz class gain-bandwidth product (বনামTLV2402ID)
- Rail-to-rail output with extended common-mode input (বনামTLV2434IP)
ডিজাইন নোট
Place the device close to the signals it processes and route each non-inverting and inverting input directly to its intended pin. Keep sensitive input traces short, avoid routing them beside switching nodes or high-current return paths, and provide a continuous ground reference. The four-channel package can reduce board area, but placing one channel far from the IC may make the interconnect more susceptible to noise than using a compact, symmetrical layout.
Connect a suitable bypass capacitor close to each supply pin and use a short ground return for the decoupling network. Account for the amplifier’s supply current, output-stage dissipation, and the power consumed by external feedback and bias networks. Because the device is intended for low-voltage operation, verify the supply tolerance, startup behavior, and maximum 10 V limit across all operating conditions rather than relying only on nominal rail voltage.
Do not assume that rail-to-rail output means the output can reach the supply rail exactly or that every common-mode input is valid. Review the manufacturer’s input common-mode range and output-swing graph for the actual supply voltage. Also keep the 500 kHz gain-bandwidth product in perspective: use higher closed-loop gain only after checking closed-loop gain-bandwidth, output swing, slew rate, and capacitive-load stability requirements.
For low-level sensor inputs, maintain symmetry between the inverting and non-inverting paths to reduce thermal and common-mode conversion of offset. Use resistor values that do not create excessive noise gain, and place input compensation or filtering components close to the relevant pins. If driving an ADC, check the amplifier’s settling behavior at the selected gain and bandwidth before treating the 500 kHz gain-bandwidth figure as a complete dynamic-response specification.
কমপ্লায়েন্স তথ্য
The Texas Instruments product page identifies the TLV2434 family and device parameters but does not state specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for TLV2434ID.