Microchip Technology

VSC8522XJQ-12 - 12-Port QSGMII GbE PHY | Microchip

MPN: VSC8522XJQ-12 ✓ সক্রিয়
302-TQFP (24 x 24 mm) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

VSC8522XJQ-12 সারাংশ

The Microchip Technology VSC8522XJQ-12 is a 12-port Gigabit Ethernet PHY with QSGMII connectivity and industrial-temperature positioning. It integrates 12 copper Gigabit Ethernet PHYs in one package, uses a power-efficient voltage-mode design, and is manufactured on 65 nm technology. The device is intended for multiport Ethernet equipment in which twelve physical-layer channels are required without implementing twelve separate PHY packages. Its QSGMII interface consolidates multiple Gigabit Ethernet channels onto a high-speed serial connection, while the integrated PHYs provide the physical-layer functions required between twisted-pair copper media and the digital MAC or switching layer.

A multiport Gigabit Ethernet PHY is an interface IC that converts high-speed serial data into standards-compliant copper Ethernet signaling and converts received copper signals back into digital data. In the product hierarchy, the VSC8522 belongs to Ethernet PHYs, physical-layer interface ICs, interface ICs, and integrated semiconductors. Its 12 integrated PHYs make it particularly useful for access switches, industrial Ethernet equipment, and communication systems requiring dense copper-port implementations within a single device.

The principal advantages of the VSC8522 are port integration, QSGMII connectivity, voltage-mode operation, and 65 nm implementation. Twelve integrated PHYs reduce the number of discrete Ethernet interface devices required in a multiport system. The voltage-mode architecture is specifically described by the manufacturer as power efficient, while the 65 nm process supports a cost-conscious implementation for networking equipment. The device family also incorporates Energy Efficient Ethernet functionality under IEEE 802.3az, addressing power reduction requirements in Ethernet networks.

Technically, the VSC8522 family is organized around twelve 1000BASE-T copper PHY channels and a serial host-side interface. QSGMII allows the MAC or switching entity to communicate with multiple PHYs over a shared interface, reducing host pin requirements compared with separate parallel or serial interfaces for every channel. The voltage-mode implementation and integrated PHY count are important architectural characteristics, but clocking, power-supply sequencing, register access, magnetics integration, and media impedance details must be implemented according to the manufacturer datasheet and reference design.

Typical uses include industrial Ethernet switches, telecommunication access equipment, network appliances with twelve copper ports, and factory-automation interfaces requiring Gigabit Ethernet connectivity. Industrial use is consistent with the target ordering code's industrial-temperature designation. QSGMII is particularly useful where the host processor would otherwise require many dedicated Ethernet interfaces, while the integrated PHY array simplifies board partitioning compared with a twelve-chip implementation.

The principal design constraint is that QSGMII is not a generic plug-and-play Ethernet port. The host interface requires correct clocking, electrical layout, synchronization, and firmware or driver support, while each copper port requires its own magnetic-component and termination implementation. Maintain short, controlled-impedance high-speed traces, follow the reference layout, and validate magnetics and cable compatibility before production. Do not substitute a PHY with a different host interface without redesigning both the PCB and device driver.

This product overview combines the manufacturer's family architecture with ordering, packaging, interface, and replacement information. It also organizes the main selection trade-offs among VSC8522 ordering variants and identifies which specifications require confirmation from the exact package datasheet before schematic release.

এর জন্য ড্রপ-ইন বিকল্প VSC8522XJQ-12 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

VSC8522-04

✅ ড্রপ-ইন
📦 302-TQFP (24 x 24 mm)
Same 12 integrated copper Gigabit Ethernet PHYs and voltage-mode architecture; the available family summary does not quantify differences in temperature grade, QSGMII configuration, or revision-specific behavior.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

VSC8522-02

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 302-TQFP (24 x 24 mm)
Same 12 integrated copper Gigabit Ethernet PHYs and voltage-mode architecture; the available family summary does not quantify revision-specific parameter differences.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

VSC8522XJQ-12 বিশেষণ

Number of Integrated PHYs 12
Supported Copper Ethernet Rate 1000 Mb/s
Host Serial Interface QSGMII
PHY Architecture Voltage-mode design
Process Technology 65 nm
Temperature Grade Industrial temperature
Device Variants in Family VSC8522-02 and VSC8522-04
Energy Efficient Ethernet Support IEEE 802.3az
প্যাকেজ 302-TQFP (24 x 24 mm)

VSC8522XJQ-12 302-tqfp (24 x 24 mm) পিন কনফিগারেশন গাইড

VSC8522XJQ-12 (302-tqfp (24 x 24 mm) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

VSC8522XJQ-12-এর জন্য 302-tqfp (24 x 24 mm) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি VSC8522XJQ-12.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

VSC8522XJQ-12 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Ethernet Access Switch, Telecommunications Access Equipment, Factory Automation Ethernet Gateway, Network Appliance With Twelve Copper Ports, Secure Network Edge Device, Video and Imaging Network Gateway.

🏭

Industrial Ethernet Access Switch

The VSC8522XJQ-12 fits an industrial access switch that needs 12 copper Gigabit Ethernet ports and a consolidated host connection. Its 12 integrated Gigabit Ethernet PHYs provide the physical-layer endpoints in one 302-TQFP package, while QSGMII carries channel traffic to a switching or MAC subsystem. The industrial-temperature ordering designation supports its use in factory-floor equipment where temperature conditions exceed consumer environments. IEEE 802.3az Energy Efficient Ethernet support can reduce link-level power when paired with compatible firmware and link partners. The principal design work remains in magnetics, port impedance, thermal validation, host-driver integration, and controlled-impedance QSGMII routing.

🌐

Telecommunications Access Equipment

The VSC8522XJQ-12 is suitable for compact telecommunications access equipment requiring twelve 1000 Mb/s copper interfaces. Integrating 12 PHYs into one 302-TQFP device reduces the number of separate Ethernet interface packages compared with a discrete-port implementation. QSGMII provides a shared serial path to the line-card controller or switching fabric, which is especially useful where backplane wiring and component density are constrained. Design verification should include the required reference clock, QSGMII I/O characteristics, reset sequencing, copper magnetics, and compliance testing for the intended deployment environment.

🏭

Factory Automation Ethernet Gateway

The VSC8522XJQ-12 can serve as the multiport copper-Ethernet front end of a factory automation gateway connecting programmable controllers, sensors, and service equipment. Twelve integrated PHYs avoid the board area and management overhead of twelve separate PHY packages, while the industrial-temperature ordering code aligns with extended industrial environments. QSGMII allows the gateway processor to manage traffic from multiple links through one high-speed interface. Robust design practice calls for isolated interfaces where required, protected copper ports, careful magnetics selection, and environmental testing over the complete operating-temperature range.

🖥️

Network Appliance With Twelve Copper Ports

The VSC8522XJQ-12 is appropriate for a network appliance that exposes 12 Gigabit Ethernet copper ports to a host processor or internal switch. The single-package 12-PHY arrangement simplifies board partitioning and keeps the host-facing electrical design centered on QSGMII. The voltage-mode PHY implementation and 65 nm process support the manufacturer's power-efficiency and cost goals. A successful product design must still accommodate per-port magnetic components, correct line-side termination, firmware support for IEEE 802.3az, and signal-integrity validation across all 12 simultaneous traffic paths.

🔒

Secure Network Edge Device

The VSC8522XJQ-12 can support the Ethernet-facing side of a secure network edge appliance that requires twelve physical service ports for aggregation, management, or equipment connections. A consolidated QSGMII interface reduces the number of host-facing connections, leaving more board area for security, storage, or processing functions. The 12 integrated copper PHYs provide a consistent physical-layer platform, and Energy Efficient Ethernet capability can improve idle-link power behavior when enabled across the complete network. Security functions are implemented elsewhere in the system; the PHY still requires validated isolation, surge protection, and port-level authentication policy at the product level.

📺

Video and Imaging Network Gateway

The VSC8522XJQ-12 is suitable for a video or imaging gateway that must consolidate traffic from multiple Gigabit Ethernet camera or processing links. Twelve integrated PHYs allow one host subsystem to manage numerous copper endpoints through QSGMII rather than using separate host Ethernet controllers for every channel. This can simplify synchronization of image data paths while keeping the external interface count manageable. Engineering validation should cover packet-loss margins under full-port traffic, QSGMII timing closure, PHY clock configuration, cable-length requirements, and thermal performance with all 12 PHYs operating continuously.

What is the VSC8522XJQ-12?
The VSC8522XJQ-12 is a Microchip Technology interface IC that integrates 12 Gigabit Ethernet copper PHYs and a QSGMII serial host interface in one 302-TQFP package. According to the Microchip VSC8522 product page and family datasheet, the device uses a power-efficient voltage-mode design and 65 nm technology. It is intended for multiport copper Ethernet systems where twelve PHY channels and a shared high-speed host interface are required.
How many Gigabit Ethernet ports does the VSC8522XJQ-12 provide?
The VSC8522XJQ-12 provides 12 integrated Gigabit Ethernet PHY channels. The Microchip family datasheet describes both VSC8522-02 and VSC8522-04 as devices containing 12 copper Gigabit Ethernet PHYs in a single package. The target ordering code denotes the industrial-temperature VSC8522 configuration. Actual usable ports can also depend on board implementation, magnetics, firmware, and host-interface configuration.
What is the difference between the VSC8522-02 and VSC8522-04 devices?
The published VSC8522 family datasheet covers both VSC8522-02 and VSC8522-04, and both integrate 12 Gigabit Ethernet copper PHYs using the same voltage-mode architecture. The manufacturer page describes them as members of one family but does not expose a complete field-by-field comparison in the product summary. Use the ordering-information and device-specific sections of the family datasheet to confirm revision, temperature, and configuration details before treating either member as a substitute.
Where can I download the VSC8522XJQ-12 datasheet PDF?
The VSC8522 family datasheet is available through the Microchip product page and the linked PDF at the Mouser datasheet address recorded on this page. The PDF identifies the VSC8522-02 and VSC8522-04 families, their 12 integrated Gigabit Ethernet PHYs, QSGMII connectivity, voltage-mode design, and 65 nm implementation. Download the PDF and confirm the exact VSC8522XJQ-12 ordering code in its ordering-information section.
Where can I find the VSC8522XJQ-12 pinout?
The VSC8522XJQ-12 pin assignment must be taken from the pin-description table in the manufacturer family datasheet. It uses a 302-TQFP package with a 24 mm by 24 mm body according to the manufacturer family listing. Use the package drawing and pin-description table together when assigning QSGMII, management, clock, power, and ground nets; do not derive the pinout from a generic Ethernet-PHY diagram.
Is the VSC8522XJQ-12 suitable for industrial Ethernet switches?
The VSC8522XJQ-12 is suitable for industrial Ethernet switch designs because the -12 ordering code is identified as industrial temperature and the device integrates 12 copper Gigabit Ethernet PHYs. QSGMII provides a consolidated host connection for a switching or MAC subsystem. Industrial qualification details beyond the temperature designation, including specific AEC-Q100 status, must be confirmed in the manufacturer documentation.
What can replace the VSC8522XJQ-12?
The closest same-family starting points are the VSC8522-04 and VSC8522-02 devices because the manufacturer describes them as related members of the 12-port VSC8522 family. A replacement is only drop-in if its exact ordering code, temperature grade, QSGMII configuration, power rails, register behavior, and 302-TQFP pin assignment match. The available cross-reference results do not identify additional verified drop-in parts, so board and software compatibility must be confirmed before substitution.
Can the VSC8522-04 replace the VSC8522XJQ-12?
The VSC8522-04 may be a candidate only after its complete ordering configuration is checked against the VSC8522XJQ-12. Both belong to a family containing 12 copper Gigabit Ethernet PHYs and use the same general voltage-mode architecture, but the available family summary does not establish identical temperature grade, host-interface mode, or ordering suffix. Verify the manufacturer ordering table and pin descriptions before treating the VSC8522-04 as a drop-in replacement.
When should I choose the VSC8522XJQ-12 over a single-port Gigabit Ethernet PHY?
Choose the VSC8522XJQ-12 when the design requires 12 copper Gigabit Ethernet channels and a consolidated QSGMII connection to a host switching or MAC subsystem. A single-port PHY can be simpler and less costly for one-port endpoint equipment, but twelve separate implementations increase component count, board area, management overhead, and synchronization complexity. The multi-port device is most appropriate when integration across all 12 channels justifies that interface architecture.
What is the best Microchip equivalent for the VSC8522XJQ-12?
The best directly related Microchip candidate is the VSC8522-04 ordering variant because it is explicitly identified as a member of the same 12-port VSC8522 family and is listed in a 302-TQFP package. Its suitability as a drop-in equivalent depends on matching the exact -12 temperature grade, QSGMII settings, supplies, pinout, and management behavior. No separate cross-brand equivalent is established by the available manufacturer and distributor records.
Does the VSC8522XJQ-12 support Energy Efficient Ethernet?
Yes. The Microchip product page states that the VSC8522 family includes Energy Efficient Ethernet functionality based on IEEE 802.3az. This capability is relevant to reducing power consumption when an attached copper link is not fully utilized. Deployment still requires compatible switch or MAC firmware, link-partner support, and system-level power-management configuration rather than relying on the PHY feature alone.
Where can I buy the VSC8522XJQ-12?
Use the Request a Quote form on this page to request the VSC8522XJQ-12, current lead time, minimum order quantity, and authorized-channel availability. The manufacturer product page and distributor listings confirm the part exists and identify its industrial 12-port configuration, but the listing summaries do not print a qualifying quantity-break price table. Request a written quotation that includes the exact VSC8522XJQ-12 suffix and required packaging before placing a purchase order.
What is the lead time for the VSC8522XJQ-12?
The current lead time for VSC8522XJQ-12 should be requested through the Request a Quote form on this page. The manufacturer and distributor listings identify the exact ordering code, but the available records do not state a reliable production lead time or confirmed stock quantity. A quote response should specify the date from which the quoted delivery window applies, including any scheduled manufacturing or allocation constraints.
Is the VSC8522XJQ-12 in stock?
Current stock for VSC8522XJQ-12 should be confirmed through the Request a Quote form on this page. The available distributor records identify the part and one distributor channel, but they do not provide a verified, current stock count. Because the business operates on quotation for source confirmation, request the exact suffix, package, quantity, and target delivery date in the quote request.
What are the key specifications of VSC8522XJQ-12 that engineers should know?
The essential VSC8522XJQ-12 specifications are 12 integrated Gigabit Ethernet copper PHYs, QSGMII host connectivity, a power-efficient voltage-mode architecture, 65 nm process technology, industrial-temperature positioning, and a 302-TQFP package measuring 24 mm by 24 mm. The manufacturer family page also identifies IEEE 802.3az Energy Efficient Ethernet support. Supply voltage, clock mode, register map, and exact temperature limits must be confirmed in the family datasheet.
What host processor interface does the VSC8522XJQ-12 use?
The VSC8522XJQ-12 uses QSGMII as its high-speed host serial interface for communicating multiple Gigabit Ethernet channels with a switching or MAC subsystem. QSGMII consolidates traffic from 12 integrated PHYs onto one serial interface. The clock source, reference-clock mode, signal rates, and required host driver are design-specific details that must be taken from the exact manufacturer datasheet and reference design.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা VSC8522XJQ-12 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the VSC8522XJQ-12 for equipment requiring 12 copper Gigabit Ethernet channels, industrial-temperature positioning, and a QSGMII host interface. The VSC8522-04 is the closest listed family candidate when its exact ordering code, clock mode, supplies, temperature grade, and register behavior match the installed design. Consider the VSC8522-02 when its revision-specific conditions are documented as equivalent. For a one-port product, a single-port PHY is usually simpler because it avoids QSGMII timing, shared-clock implementation, and a 302-TQFP layout. For a cross-brand redesign, there is no verified drop-in choice established here; changing vendors normally requires a new footprint, electrical review, host-driver adaptation, and validation of IEEE 802.3az behavior. Always confirm the exact ordering suffix against the manufacturer ordering table before releasing a replacement BOM.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য VSC8522-04 VSC8522-02
Brand Microchip Technology Microchip Technology Microchip Technology
Package 302-TQFP (24 x 24 mm) 302-TQFP (24 x 24 mm) 302-TQFP (24 x 24 mm)
Integrated Gigabit Ethernet PHYs 12 12 12
Copper Ethernet Rate 1000 Mb/s 1000 Mb/s 1000 Mb/s
Host Interface QSGMII QSGMII QSGMII
PHY Architecture Voltage-mode design Voltage-mode design Voltage-mode design
Process Technology 65 nm 65 nm 65 nm
Energy Efficient Ethernet IEEE 802.3az IEEE 802.3az IEEE 802.3az

মূল পার্থক্যসমূহ

  • Twelve copper Gigabit Ethernet PHYs in one package (বনামVSC8522-04)
  • Shared high-speed host connectivity (বনামVSC8522-02)
  • Power-efficient voltage-mode PHY architecture (বনামVSC8522-04)

ডিজাইন নোট

Route the QSGMII interface as a controlled-impedance high-speed group and follow the manufacturer reference layout for length matching, clock topology, vias, and return paths. Keep the PHY clock and decoupling network close to the device, and keep the 12 copper channels grouped by their magnetics. Do not substitute generic Ethernet layout rules for the VSC8522 reference design, because QSGMII timing and package-exit geometry are central to reliable operation.

Decouple each supply rail at the VSC8522 package with the capacitance and placement specified by the manufacturer datasheet. Plan power-up and reset sequencing around the QSGMII host and all 12 PHYs so the interface does not receive an undefined clock or incomplete supply. Validate the power rails under full-port traffic because simultaneous copper activity can create a higher transient current profile than a single-port PHY test condition.

Treat each copper channel as a full differential signal path and use the manufacturer's recommended magnetic-component model, termination, and board geometry. Check impedance, insertion loss, return loss, and cable compatibility rather than validating only link-up. For QSGMII, verify eye quality and jitter margin with realistic host clocking and trace loading, because a functioning PHY link does not prove that the shared host interface has sufficient timing margin.

Estimated: calculate worst-case device dissipation from the supply voltages, total PHY current, and the manufacturer power data before assigning the 302-TQFP thermal budget. If the calculated dissipation is P watts, use P multiplied by the applicable junction-to-ambient thermal resistance to estimate the junction-temperature rise. Validate the estimate with board-level thermal measurements because copper area, airflow, adjacent heat sources, and the exact 24 mm by 24 mm TQFP layout can materially change results.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product and distributor records do not provide product-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. IEEE 802.3az Energy Efficient Ethernet support is stated by Microchip for the VSC8522 family.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

VSC8522XJQ-12 datasheet VSC8522XJQ-12 pinout VSC8522XJQ-12 datasheet pdf VSC8522XJQ-12 equivalent VSC8522XJQ-12 replacement VSC8522XJQ-12 cross reference VSC8522XJQ-12 vs VSC8522-04 VSC8522XJQ-12 footprint VSC8522XJQ-12 QSGMII VSC8522XJQ-12 price VSC8522XJQ-12 stock Microchip VSC8522XJQ-12 VSC8522 12 port QSGMII PHY VSC8522 industrial Ethernet switch VSC8522 302 TQFP pinout

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology VSC8522XJQ-12 VSC8522-04 VSC8522-02 Gigabit Ethernet PHY multiport Ethernet PHY copper Ethernet QSGMII IEEE 802.3az Energy Efficient Ethernet voltage-mode design 65 nm process technology 302-TQFP 24 x 24 mm package interface IC physical-layer IC network switching industrial Ethernet QSGMII clock copper magnetics Ethernet PHY semiconductor surface mount
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন