WM8727CGED/R - 24-Bit 192kHz Stereo DAC | Cirrus Logic
MPN: WM8727CGED/R ✓ সক্রিয়WM8727CGED/R সারাংশ
A digital-to-analog converter is an integrated circuit that converts digital audio samples into proportional analog voltage signals that can drive amplifiers, speakers, or line-level output stages. In the broader component hierarchy, the WM8727CGED/R is an audio DAC, within the ADC/DAC class of integrated circuits and the wider signal-conversion and signal-processing semiconductor category.
The key headline specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, stereo operation, an I2S serial audio interface, and an 8-pin SOIC package. These attributes position the converter for applications in which digital audio source quality must be preserved through the DAC stage. The 192 kHz capability supports high-resolution audio streams, while the stereo architecture provides two independent analog output channels for conventional left-right playback systems.
The WM8727CGED/R belongs to the Wolfson Microelectronics audio-converter product family, which Cirrus Logic has represented through its audio IC portfolio. It is intended for applications where a digital audio stream must be converted into an analog output suitable for downstream amplification. Its I2S interface allows connection to digital audio processors, USB interface controllers, application processors, and digital audio transports.
Typical uses include hi-fi audio equipment, digital audio decoding modules, multimedia consoles, audio interfaces, soundbars, set-top boxes, and portable or networked audio products. In these systems, the converter can accept 24-bit digital samples and provide the analog stereo signal required by a headphone or line-output amplifier stage. Board-level design should include correct analog and digital grounding, short output routing, and the bypass capacitors required by the manufacturer datasheet.
One important design consideration is that converter headline specifications do not determine the final system audio performance. Clock source quality, digital-audio layout, analog output filtering, power-supply noise, amplifier selection, and output impedance all influence the reproduced signal. Use the manufacturer pin-description table and application information to assign PCB nets and verify the supported clock and interface configurations.
This page organizes the verified product identity, package information, interface description, and sourcing links for the WM8727CGED/R. It also provides engineering context for audio-converter selection, distinguishes the exact ordered part from related family members, and highlights where a drop-in substitution requires explicit pin and function verification before PCB release.
এর জন্য ড্রপ-ইন বিকল্প WM8727CGED/R — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
WM8727CGED
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
WM8727CGED/R/E
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
WM8727CGED/R সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Stereo audio digital-to-analog converter (DAC) |
| রেজোলিউশন | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Audio Interface | I2S |
| Channel Configuration | Stereo |
| প্যাকেজ | 8-pin SOIC |
| মাউন্টিং টাইপ | Surface mount |
| Manufacturer | Cirrus Logic |
| Original Product Family | Wolfson Microelectronics |
WM8727CGED/R 8-pin soic পিন কনফিগারেশন গাইড
WM8727CGED/R (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি WM8727CGED/R.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
WM8727CGED/R এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Hi-Fi Digital Audio Player, USB Audio Interface, Multimedia Set-Top Box, Network Audio Decoder, Digital Soundbar Controller, Digital Audio Headphone Module.
Hi-Fi Digital Audio Player
The WM8727CGED/R fits a digital hi-fi player because it combines 24-bit resolution with operation up to 192 kHz and two independent analog output channels. Position it downstream of a high-quality digital audio transport and upstream of the line-level amplifier, using the I2S interface to receive left and right sample streams. The 192 kHz capability preserves high-rate source data, while the stereo DAC stage provides the analog signal needed by the amplifier. Design the clock path for low jitter, keep the digital and analog grounds arranged as directed by the manufacturer, and follow the recommended output filtering network to control aliasing and channel imbalance.
সুপারিশকৃত
USB Audio Interface
The WM8727CGED/R is suitable for the analog-output side of a USB audio interface when the USB controller exposes audio through an I2S stream. Its 24-bit resolution, 192 kHz maximum sampling rate, and stereo channel arrangement align with high-resolution USB audio use cases. The converter receives synchronized data, clock, and word-select signals from the USB audio bridge and produces analog left and right outputs for headphone or line amplifiers. Route these outputs away from USB and digital switching nodes, verify that the bridge supplies the required clocking, and use the datasheet bypass and output-filter values to preserve signal integrity.
সুপারিশকৃত
Multimedia Set-Top Box
The WM8727CGED/R can supply analog stereo audio in a multimedia set-top box where decoded surround or stereo content is ultimately presented through two analog channels. Its I2S interface connects naturally to audio decoders and application processors, while 24-bit resolution and a 192 kHz sampling capability support high-quality internal audio paths. Place the converter near the line-output amplifier to minimize analog trace length, isolate it from switching-regulator and processor power paths, and follow the manufacturer grounding scheme. Confirm that the source processor supports the required I2S mode, sample rate, and bit depth before committing the digital audio interconnect.
সুপারিশকৃত
Network Audio Decoder
The WM8727CGED/R is appropriate for a network audio decoder that receives digital audio from an Ethernet or wireless transport and converts it to analog stereo for amplification. The I2S interface supports integration with digital audio processors, and the 24-bit, 192 kHz capability is useful for high-resolution streams. Keep the converter clock source isolated from Ethernet switching activity, separate noisy processor and network-supply currents from the audio section, and preserve the recommended output network. A high-quality analog amplifier then converts the DAC outputs to a line or headphone level. Validate full-path latency and clock synchronization with the source processor during firmware integration.
সুপারিশকৃত
Digital Soundbar Controller
The WM8727CGED/R can provide the analog stereo reference channel in a soundbar controller that mixes or selects audio sources before power amplification. Its 24-bit resolution, 192 kHz sampling support, and I2S input suit digital source signals originating from a host application processor. Place the converter close to the analog summing and line-amplifier circuitry, and route the I2S bus away from high-current speaker-driver outputs. Use the manufacturer's recommended bypass capacitors and reference grounding to minimize converter noise reaching the amplifier input. The stereo topology also allows separate left and right routing when the system applies channel-specific gain or processing.
সুপারিশকৃত
Digital Audio Headphone Module
The WM8727CGED/R works as the source-side converter in a digital headphone module, accepting I2S audio and driving a headphone amplifier through two analog outputs. Its stereo format matches conventional left-right headphone channels, while 24-bit resolution and 192 kHz operation support high-resolution playback paths. The output drive requirements of the headphone amplifier must match the DAC's output impedance and biasing, so confirm those details in the manufacturer data before finalizing the analog network. Keep the analog section physically compact and separate from switching regulators and digital processor traces to reduce channel noise and improve inter-channel balance.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা WM8727CGED/R — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | WM8727CGED | WM8727CGED/R/E |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Product Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz | 192 kHz |
| Channel Configuration | Stereo | Stereo | Stereo |
| Digital Audio Interface | I2S | I2S | I2S |
মূল পার্থক্যসমূহ
- High-resolution stereo conversion (বনামWM8727CGED)
- Direct I2S integration (বনামWM8727CGED/R/E)
- Compact 8-SOIC implementation (বনামWM8725CGED/R)
ডিজাইন নোট
Place the input and output bypass capacitors specified by the manufacturer directly beside the associated device pins, and route the analog outputs as short traces to the next amplifier stage. Keep switching-regulator, processor, and digital-clock routing away from the audio output nets. A compact, partitioned analog area reduces the chance that digital crosstalk or supply ripple is reproduced as audible noise.
Treat the I2S clock as the highest-sensitivity digital connection in the design. Route data, clock, and word-select as a grouped, continuously referenced interface, terminate the clock appropriately at the receiver, and avoid long stubs. Clock jitter directly affects the digital-to-analog conversion result, so a stable low-jitter source and short synchronous routing are more valuable than adding capacitance after the analog outputs.
Do not substitute a generic 24-bit DAC based only on resolution and package count. Confirm the exact pin map, supply voltage, I2S clock polarity, analog output type, output impedance, and recommended external network. Also verify the ordering suffix for temperature grade and packing. These checks are especially important when the candidate shares an 8-pin SOIC outline but assigns power, clock, or analog-output functions differently.
কমপ্লায়েন্স তথ্য
The collected product listings identify the device as an audio DAC and do not provide explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification statements. AEC-Q100 is not applicable to this catalog listing because no automotive qualification claim is shown.
