WM9705CSEFL/V - 18-Bit AC'97 Audio Codec | Cirrus Logic
MPN: WM9705CSEFL/V ✓ সক্রিয়WM9705CSEFL/V সারাংশ
An audio codec is an integrated circuit that converts between analog audio signals and a digital audio bus. In the signal chain, an ADC samples microphone or line input audio for digital transmission, while a DAC reconstructs digital audio into an analog output. AC'97 codecs combine these conversion functions with digital audio control and multimedia interface logic, placing the WM9705CSEFL/V within the broader codec, interface IC, and audio-processing semiconductor hierarchy.
The WM9705CSEFL/V is differentiated by its 18-bit resolution, stereo converter organization, and AC'97 compatibility. Two ADC channels and two DAC channels allow simultaneous stereo capture and playback functions within one device. Its 48-QFN package supports compact surface-mount construction, while the exposed thermal pad assists heat transfer from the device to the PCB. The listed ADC and DAC signal-to-noise figures distinguish its usable audio performance from lower-resolution legacy codecs.
Technically, the part combines analog input and output stages with a digital AC'97 audio interface. AC'97 is a legacy multimedia bus architecture used to carry audio data and control information between codecs and host audio controllers. Using a single codec for capture and playback reduces the number of separate analog audio devices required in a system, although correct clocking, bus timing, analog routing, and power sequencing remain essential to operation.
Typical uses include industrial human-machine-interface panels, embedded touch-screen terminals, point-of-sale equipment, and legacy embedded systems that already use an AC'97 host controller. The integrated touch-screen interface is particularly relevant to compact human-machine interfaces where analog stereo audio and touch input share the same controller. Its 48-QFN footprint is also appropriate for multilayer PCB layouts with controlled impedance and a solid thermal-pad connection.
Designers should verify the complete pin assignment, analog input and output configuration, AC'97 clocking requirements, and recommended external component values against the manufacturer datasheet before layout is released. The exposed pad requires a plated PCB thermal area and according-to-manufacturer solder and assembly guidance. Power, analog ground, digital ground, and signal-return connections should be planned to minimize converter noise coupling into the touch and audio paths.
This product page organizes the confirmed codec attributes, package information, acquisition path, comparison points, and practical implementation considerations into a concise engineering reference. It also distinguishes verified device identity from order-code and lifecycle details that must be confirmed with the manufacturer before a new production design is released.
এর জন্য ড্রপ-ইন বিকল্প WM9705CSEFL/V — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনWM9705CSEFL/V সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Resolution | 18 bit |
| ADC Count | 2 |
| DAC Count | 2 |
| ADC Signal-to-Noise Ratio | 86 dB typical |
| DAC Signal-to-Noise Ratio | 91 dB typical |
| Digital Audio Interface | AC'97 |
| Touch-Screen Interface | Integrated |
| প্যাকেজ | 48-QFN, 7 mm x 7 mm |
| Package Construction | Exposed pad |
| মাউন্টিং টাইপ | Surface mount |
WM9705CSEFL/V exposed pad পিন কনফিগারেশন গাইড
WM9705CSEFL/V (exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি WM9705CSEFL/V.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
WM9705CSEFL/V এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Touch-Screen Terminal, Point-of-Sale System, Embedded Voice Panel, Multimedia Kiosk Controller, Medical Monitoring Panel, Legacy Audio Embedded System.
Industrial Touch-Screen Terminal
The WM9705CSEFL/V fits an industrial touch-screen terminal whose controller supports AC'97 and requires audio capture and playback beside touch input. Its 18-bit ADC and DAC channels support stereo conversion, while the typical 86 dB ADC and 91 dB DAC signal-to-noise ratios provide useful performance for voice prompts, system sounds, and local audio monitoring. The integrated touch-screen interface reduces the need for a separate controller, although the host software, interrupt handling, grounding, and analog front-end design still determine practical performance.
সুপারিশকৃত
Point-of-Sale System
A point-of-sale terminal can use the WM9705CSEFL/V to combine customer-facing audio prompts, microphone capture, and touch interaction in an AC'97-based platform. Two 18-bit ADC channels and two 18-bit DAC channels support stereo recording and playback without separate converters. The 48-QFN package supports compact board layouts, but the exposed pad needs a dedicated PCB thermal area. Firmware timing, input headroom, speaker amplification, and AC'97 clock configuration must be validated together.
সুপারিশকৃত
Embedded Voice Panel
The WM9705CSEFL/V is appropriate for an embedded voice panel that captures operator audio and reproduces prompts through an AC'97 host controller. Its two ADC paths permit stereo source capture, while the two DAC paths support stereo playback before any external amplifier. The 91 dB typical DAC signal-to-noise ratio is suitable for clean prompt reproduction, and the 86 dB typical ADC ratio supports intelligible speech capture. Board design should separate sensitive analog returns from digital AC'97 activity and follow the recommended external filtering network.
সুপারিশকৃত
Multimedia Kiosk Controller
A multimedia kiosk can use the WM9705CSEFL/V as the combined stereo audio and touch interface for an AC'97 controller. Integrating the converters and touch controller simplifies signal routing compared with separate audio and touch devices, while the 7 mm by 7 mm 48-QFN package conserves board area. The implementation must provide stable supplies, correct AC'97 clocks, controlled analog layout, and a properly connected exposed pad. Speaker amplification remains external, and the codec should be configured for the intended input and output signal levels.
সুপারিশকৃত
Medical Monitoring Panel
The WM9705CSEFL/V may support audio communication in a medical monitoring panel that already has an AC'97 host and touch-screen interface. Two ADC channels can accept microphone or line-level sources, and two DAC channels can generate monitoring audio or spoken prompts. The 18-bit conversion and typical 91 dB DAC signal-to-noise ratio suit general-purpose audio paths, although medical performance claims depend on the complete system design and validation. Signal isolation, grounding, EMI control, and clinical requirements remain outside the codec's standalone specifications.
সুপারিশকৃত
Legacy Audio Embedded System
The WM9705CSEFL/V is suited to maintaining or extending a legacy embedded platform whose host controller already communicates through AC'97. It provides stereo ADC and DAC functions in one 18-bit codec and includes the touch-screen interface expected by compatible control schemes. Its value is strongest where replacing the host bus architecture would be disruptive. Integration engineers should confirm pin compatibility, clock generation, register behavior, and analog component requirements rather than assuming every AC'97 codec is interchangeable.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা WM9705CSEFL/V — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | WM9705CSEFL/RV |
|---|---|---|
| Package | 48-QFN, 7 mm x 7 mm, exposed pad | 48-QFN order-code variant |
| Brand | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo AC'97 audio codec with touch-screen interface | Stereo AC'97 codec with touch-screen interface |
| Converter Resolution | 18 bit | 18 bit |
| ADC Count | 2 | 2 |
| DAC Count | 2 | 2 |
| ADC Signal-to-Noise Ratio | 86 dB typical | 86 dB typical |
| DAC Signal-to-Noise Ratio | 91 dB typical | 91 dB typical |
| Digital Interface | AC'97 | AC'97 |
| Order Code | WM9705CSEFL/V | WM9705CSEFL/RV |
মূল পার্থক্যসমূহ
- Integrated touch and stereo conversion (বনামWM9705CSEFL/RV)
- 18-bit stereo converter architecture (বনামWM9705CSEFL/RV)
- Compact exposed-pad implementation (বনামWM9705CSEFL/RV)
ডিজাইন নোট
Assign the exposed pad as a dedicated PCB thermal area and follow the manufacturer land pattern exactly. Because the package is a 48-QFN with fine-pitch leads, board registration, solder mask, paste volume, and reflow profile should be reviewed against the package drawing. Do not place high-speed or switching nodes beneath the exposed pad, and avoid routing sensitive analog inputs through the digital AC'97 region.
Separate analog and digital return paths and keep the codec, analog input components, and output network close together. Place input and output capacitors at their associated pins using the shortest practical routes, and keep touch-sensor traces away from microphone and line-input nets. The AC'97 clock and data lines require controlled impedance where the host bus requires it, while analog traces should remain short and symmetric where practical.
Design separate analog and digital supply paths with local high-frequency bypassing at the codec pins, following the manufacturer application diagram and capacitor values. Verify the exact supply rails, sequencing requirements, and permissible ripple before schematic release. The exposed pad improves heat transfer but does not replace correct supply distribution, so estimate regulator headroom and regulator dissipation for the complete system.
Do not treat two AC'97 codecs as interchangeable merely because both use the same bus. The WM9705CSEFL/V combines 18-bit stereo converters, a touch-screen interface, and a specific 48-QFN pin arrangement. Before substituting a part, compare every power pin, analog signal, AC'97 signal, clock requirement, register behavior, and exposed-pad connection. Also confirm the meaning of the complete ordering suffix rather than assuming that /V and /RV are interchangeable.
কমপ্লায়েন্স তথ্য
Compliance status requires confirmation from the manufacturer product page, current material declaration, or device documentation for the exact WM9705CSEFL/V order code.