XC3S4000-4FG676C - 4M Gate Spartan-3 FPGA, 676-Ball FBGA | AMD
MPN: XC3S4000-4FG676C ✗ জীবনকালের সমাপ্তিXC3S4000-4FG676C সারাংশ
A field programmable gate array, or FPGA, is a programmable logic device whose internal array of configurable logic blocks, programmable interconnect and I/O blocks is set from a bitstream rather than mask programming. An FPGA sits above fixed logic and above mask-programmable ASICs in the design hierarchy: it is a semiconductor, and within the logic family it belongs to the CPLD/FPGA class of reconfigurable digital logic. Because the configuration is loaded at power-up, an FPGA allows field upgrades, prototyping and hardware revision without respinning silicon, which is why the device is chosen over an equivalent mask ASIC whenever time-to-market outweighs unit cost.
Key features of this device include 62,208 configurable logic cells spread over 19,824 slices, a large number of dedicated 18 Kbit block RAM tiles, dedicated 18x18 multiplier blocks for DSP work, and 489 single-ended I/O that can be configured for LVCMOS, LVTTL, HSTL, SSTL and other standards. The 676-ball FBGA package exposes 489 I/O plus power, ground and configuration pins, keeping the total pin count within what fine-pitch BGA assembly can support.
Spartan-3 devices use a column-based architecture in which each slice contains four 4-input LUTs and flip-flops shared with local routing, and in which dedicated vertical and horizontal interconnect channels route signals between slices. Because the fabric is only 90 nm, this family delivers a very favorable cost per logic cell for designs that need tens of thousands of gates, and it supports dedicated block RAM and DSP resources that keep most soft multipliers and FIFOs out of the general fabric. Configuration loading is handled through the standard serial or parallel configuration pins, and the device operates from a single 1.2 V core rail with separate adjustable I/O rails.
Typical applications include industrial control and data acquisition equipment, video and image processing pipelines, telecom line cards, networking and protocol bridges, DSP and instrumentation, and embedded systems that need deterministic parallel logic with large on-chip memory. The 4M-gate density makes the XC3S4000-4FG676C a common fit for multi-channel protocol converters and test-equipment logic sections.
When laying out a board around this device, treat the FGG676 land pattern and its power distribution network as the primary risk. The 1.2 V core rail and the I/O rails each need their own decoupling network, and every ground ball must be connected to a solid plane so that simultaneous switching in the fabric does not corrupt adjacent signal integrity. Use the pinout table and package drawing in the manufacturer datasheet when assigning ball locations, and confirm the power-up sequencing requirements for the configuration pins before committing the schematic.
এর জন্য ড্রপ-ইন বিকল্প XC3S4000-4FG676C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC3S4000-4FG676C (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, System Gates, I/O Count, Package, Package Type.
XC3S4000-4FGG676C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S4000-4FG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC3S4000-4FGG676I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S4000-5FGG676C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S4000-5FGG676I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC3S4000-4FG676C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Field Programmable Gate Array (FPGA), Spartan-3 family |
| System Gates | 4,000,000 |
| Logic Cells | 62,208 |
| User I/O | 489 |
| প্যাকেজ | 676-ball FGG676 fine-pitch BGA (FBGA) |
| Pin / Terminal Count | 676 |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| Max Clock Frequency | 630 MHz |
| Speed Grade | -4 (mid-performance) |
| Temperature Grade | Commercial (C suffix), 0 °C to +85 °C |
| Architecture | Column-based Spartan-3 architecture, 4-input LUT per slice |
| Terminal Type | Ball (BGA) |
| Package Shape | Square |
| মাউন্টিং স্টাইল | Surface mount |
| RoHS Compliance | Compliant |
| Lead-Free Status | Lead free |
XC3S4000-4FG676C square পিন কনফিগারেশন গাইড
XC3S4000-4FG676C (square প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC3S4000-4FG676C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC3S4000-4FG676C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control and Data Acquisition, Video and Image Processing Pipelines, Telecom Line Cards and Protocol Bridges, DSP and Instrumentation Signal Processing, Network Packet Processing and Protocol Conversion, Embedded System-on-Fabric Prototyping.
Industrial Control and Data Acquisition
The XC3S4000-4FG676C suits machine control and data-acquisition front ends where parallel logic must sample many channels at once and buffer results. Its 62,208 logic cells give room for parallel bus arbitration, encoder decoding and control state machines without offloading to external glue logic, while the dedicated block RAM tiles hold acquisition FIFO data on chip. Running the fabric at the -4 grade supports a 630 MHz maximum clock, so high-speed parallel data paths such as parallel ADC capture or LVDS input deserialization can be clocked comfortably. In a noisy industrial cabinet, the single 1.2 V core rail with dedicated decoupling and a fully bonded ground ball array helps keep signal integrity predictable.
সুপারিশকৃত
Video and Image Processing Pipelines
Video processing is a natural fit for the XC3S4000-4FG676C because the fabric density supports wide pixel pipelines and line buffers in parallel. The 62,208 logic cells support parallel pixel pipelines, colour-space conversion and scaler control, while dedicated 18x18 multiplier blocks implement the multiply-accumulate stages used in filter and gamma-correction arithmetic without consuming general routing. The 489 user I/O are enough to drive parallel camera or LCD data buses directly to a connector. At a 630 MHz maximum clock on the -4 grade, timing closure on pipelined filter stages is realistic, and the 676-ball FBGA keeps the footprint small relative to the I/O count it offers.
সুপারিশকৃত
Telecom Line Cards and Protocol Bridges
Telecom line card designs need deterministic, low-latency logic that converts between framing formats and framing rates. The XC3S4000-4FG676C provides enough logic cells to implement multiple parallel-to-serial conversion paths, framing state machines and backpressure handling in one device, and the 489 I/O support the wide parallel buses typical of line-card backplanes. Dedicated block RAM supports per-channel buffer depths without consuming fabric, and the multiplier blocks assist with line-rate CRC and FEC assist arithmetic. The commercial temperature grade suits indoor equipment rooms, and the same die is available in an industrial grade ordering code for outdoor or cabinet-mounted deployments.
সুপারিশকৃত
DSP and Instrumentation Signal Processing
Instrumentation and DSP front ends benefit from the dedicated multiplier and memory resources in the XC3S4000-4FG676C. Filter coefficients, decimation and interpolation stages, and FFT butterfly arithmetic can be placed in the dedicated 18x18 multiplier blocks and block RAM tiles, leaving the general fabric free for control and data movement logic. The 630 MHz maximum clock of the -4 grade is enough to overlap multiply and memory operations in a pipelined architecture and keep latency predictable for measurement instruments. Its 489 I/O allow direct connection to high-speed converters and modulator inputs, and the commercial 0 °C to +85 °C range covers bench and laboratory environments.
সুপারিশকৃত
Network Packet Processing and Protocol Conversion
Router and gateway designs often need header parsing, table lookup and rate conversion logic running alongside a host processor. The XC3S4000-4FG676C provides 62,208 logic cells, enough for a complete store-and-forward buffer pipeline with checksum and queue management, plus on-chip block RAM for packet buffers and small lookup tables. The 489 I/O support parallel packet buses to a network ASIC or a host bus, and the -4 grade with a 630 MHz maximum clock supports 10/100 class and lower-rate serial aggregation at reasonable throughput. Because the device is a mature, well-characterized family, legacy network appliance designs can be maintained without respinning the surrounding board.
সুপারিশকৃত
Embedded System-on-Fabric Prototyping
The XC3S4000-4FG676C is widely used as the target device for FPGA-based prototyping of embedded systems, because it combines a large logic budget with a compact, mature package that most prototype flows support. Soft processor cores, bus bridges, DMA engines and application logic fit comfortably within 62,208 logic cells, and the block RAM tiles allow a working memory subsystem to be emulated before an ASIC tape-out. The 630 MHz maximum clock supports realistic bus and peripheral timing, and the 489 I/O let the prototype expose most of the ASIC interface directly. When the design graduates, the same family also exists in lower and higher density variants on compatible packages, easing migration.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC3S4000-4FG676C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC3S4000-4FGG676C | XC3S4000-4FG676I | XC3S4000-4FGG676I | XC3S4000-5FGG676C | XC3S4000-5FGG676I |
|---|---|---|---|---|---|---|
| Package | 676-ball FGG676 FBGA | 676-ball FGG676 FBGA - same | 676-ball FFG676 FBGA - same | 676-ball FGG676 FBGA - same | 676-ball FGG676 FBGA - same | 676-ball FGG676 FBGA - same |
| Brand | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) | AMD (Xilinx) |
| System Gates | 4,000,000 | 4,000,000 | 4,000,000 | 4,000,000 | 4,000,000 | 4,000,000 |
| Logic Cells | 62,208 | 62,208 | 62,208 | 62,208 | 62,208 | 62,208 |
| User I/O | 489 | 489 | 489 | 489 | 489 | 489 |
| Speed Grade | -4 (630 MHz max) | -4 (same) | -4 (same) | -4 (same) | -5 (faster, approx. 10% above -4) | -5 (faster, approx. 10% above -4) |
| Temperature Grade | Commercial (C), 0 °C to +85 °C | Commercial (C), same | Industrial (I), wider range | Industrial (I), wider range | Commercial (C), same | Industrial (I), wider range |
| Package Marking / Lead-Free | FG676, lead free | FGG676, lead free | FG676, lead free | FGG676, lead free | FGG676, lead free | FGG676, lead free |
| Process Technology | 90 nm CMOS | 90 nm CMOS (same die) | 90 nm CMOS (same die) | 90 nm CMOS (same die) | 90 nm CMOS (same die) | 90 nm CMOS (same die) |
| Core Supply Voltage | 1.2 V | 1.2 V (same) | 1.2 V (same) | 1.2 V (same) | 1.2 V (same) | 1.2 V (same) |
| Lifecycle Status | Obsolete (Spartan-3 legacy family) | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
মূল পার্থক্যসমূহ
- Exact drop-in availability across the full Spartan-3 4M ordering family (বনামXC3S2000-4FG676C)
- Lead-free package marking available in the same footprint (বনামXC3S4000-4FG676I)
- Speed-grade headroom without any PCB change (বনামXC3S4000-5FGG676C)
- Industrial temperature coverage as a direct substitution (বনামXC3S4000-4FGG676I)
- Consistent, mature architecture with ample on-chip memory and DSP resources (বনামXC2V3000-4FG676C)
ডিজাইন নোট
The XC3S4000-4FG676C runs its core from a 1.2 V rail, and that rail carries the largest dynamic current in the device because it switches the 62,208-cell fabric. Build a dedicated 1.2 V plane with its own low-ESR bulk capacitance and a dense set of high-frequency decoupling placed at the ball rows that the package drawing identifies as core VCC and VCC AUX. Bring the I/O rails up separately with their own filtering so that switching noise on an adjustable I/O rail does not couple into the core. Estimated: with a 1.2 V core at a few hundred mA of average activity current, the core rail dissipation is on the order of 0.5 W, so a small copper pour per rail with local ceramic decoupling is adequate, but star-point grounding for the analog-adjacent I/O groups is still worth doing.
The 676-ball fine-pitch BGA land pattern has roughly 0.8 mm ball pitch, so the PCB must support fine-pitch escape routing and micro-via fanout beneath the device. Mirror the manufacturer FGG676 land pattern exactly rather than approximating it, and route fanout vias to an inner layer so that the first escape does not constrain the top-layer routing density. Because the ball grid has no perimeter rows for decoupling, place the input and output capacitors on the same side of the board as close to their respective ball groups as the escape geometry allows, and reserve an uninterrupted ground plane region directly under the device to suppress return-path discontinuity on high-speed edges.
On a 90 nm device running at the -4 grade, the maximum clock of 630 MHz means edge rates substantially faster than the clock frequency, so impedance control and return-path continuity matter more than nominal rise-time numbers. Every signal that leaves the FPGA must have a continuous plane reference under the trace, and avoid routing over plane splits or between the 1.2 V and I/O planes. Keep LVCMOS and other single-ended standards on short, properly terminated nets, and if any interface requires SSTL or HSTL, follow the terminated-stub rules in the family datasheet. Also keep configuration pins and clock-capable inputs away from noisy switching nets, because a marginal configuration read or a ringing clock input will corrupt the bitstream load.
Two mistakes dominate redesigns of this board. First, the design may have been laid out for a -4 grade part and later populated with a -5 grade ordering code; the footprint is identical but timing closure must be re-verified against the faster grade, and the reverse substitution is always safe. Second, the temperature-grade suffix is often ignored in a purchasing system, so an industrial or commercial part can be fitted to a board that must work below 0 °C. Add the temperature grade, speed grade and package marking suffix to the approved-part list so that only the intended ordering code reaches production. Also verify that the configuration bitstream matches the exact device before release, since the bitstream identifies the device by its part number.
Estimated: the 1.2 V core rail at an assumed 300 mA average activity current dissipates about 0.36 W in the core, and the I/O rails add proportionally to their switching activity, so total device dissipation typically stays well below 1 W in a typical design. That is a benign thermal load compared with the 90 nm era expectation, provided the FGG676 package is soldered properly and the ground balls beneath the device are tied to a solid plane rather than isolated thermal-relief vias. Where the board is confined in a sealed enclosure with poor convection, still confirm the junction temperature margin against the 85 °C upper limit of the commercial grade, since that limit refers to the ambient plus self-heating at the hottest ball.
কমপ্লায়েন্স তথ্য
RoHS compliance and lead-free status are stated in the catalog entry for this part. REACH status, halogen-free declaration and conflict-minerals reporting are not published for this ordering code. The device is an industrial/consumer logic device and is not AEC-Q100 qualified.