XC7A200T-L1SBG484I - 215K Logic Cell Artix-7 FPGA | AMD
MPN: XC7A200T-L1SBG484I ✓ সক্রিয়XC7A200T-L1SBG484I সারাংশ
An FPGA is a reconfigurable semiconductor in the programmable-logic and digital-signal-processing hierarchy. Its programmable fabric contains configurable logic and block resources that can implement parallel processing, control, communications, and interface functions. Unlike fixed-function logic ICs, an FPGA can be reprogrammed after manufacture, allowing hardware behavior to be revised without replacing the physical component.
The XC7A200T-L1SBG484I belongs to the Artix-7 family, which combines programmable logic with dedicated block RAM, MMCM, and PLL resources. The package-specific 484-ball format provides 285 I/O for board-level connections. Its industrial grade designation makes it relevant to equipment expected to operate across an extended temperature range, subject to the limits in the manufacturer documentation.
The 215,360-logic-cell device supports substantially more parallel processing capacity than smaller Artix-7 members. Block RAM can accelerate buffering, packet storage, waveform capture, and data-plane operations, while the MMCM and PLL resources support clock generation and phase management. Exact timing, voltage, and power figures for this ordered device should be selected from the corresponding Artix-7 datasheet and package tables.
Typical uses include industrial control, smart instrumentation, communications equipment, embedded vision, and compact data-acquisition systems. In such systems, parallel configurable logic can consolidate control, interface, and signal-processing functions, while the SBG484 package supports designs requiring more external connections than smaller Artix-7 packages.
Design planning should begin with the AMD package pinout files and the Artix-7 DC and AC switching-characteristics documentation. Verify the L1 voltage requirements, decoupling network, configuration interface, clock topology, and exposed thermal requirements before schematic capture or PCB layout.
This page combines the exact ordered-part identity, package information, Artix-7 resource counts, verified regulatory information, structured replacement screening, and practical engineering guidance. It also distinguishes directly supportable drop-in candidates from devices that merely use the same FPGA family but require a different package, voltage grade, speed grade, or bitstream design.
এর জন্য ড্রপ-ইন বিকল্প XC7A200T-L1SBG484I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7A200T-L1SBG484I (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Temperature Grade, Device Type, Speed Grade, Block RAM.
XC7A200T-2SBG484I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7A200T-3SBG484E
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7A200T-L1SBG484I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Logic Cell Count | 215,360 cells |
| Block RAM | 13,140 Kb |
| User I/O Count | 285 I/O |
| প্যাকেজ | SBG484, 484-ball FCBGA |
| Package Pin Count | 484 balls |
| FPGA Family | Artix-7 |
| Speed Designation | L1 |
| Temperature Grade | Industrial |
| Clock Management Resources | MMCM and PLL resources |
| Programmability | User-programmable FPGA fabric |
| মাউন্টিং টাইপ | Surface Mount |
| RoHS Compliance | Compliant |
| REACH Compliance | Compliant |
| DRC Conflict Status | Conflict Free |
XC7A200T-L1SBG484I 484 balls পিন কনফিগারেশন গাইড
XC7A200T-L1SBG484I (484 balls প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7A200T-L1SBG484I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7A200T-L1SBG484I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Systems, Smart Instrumentation, Communications and Network Interface, Embedded Vision and Image Processing, Data Acquisition Systems, Test and Measurement Equipment.
Industrial Control Systems
The XC7A200T-L1SBG484I fits industrial controllers that combine machine sequencing, sensor conditioning, communications, and safety-adjacent control logic in one programmable device. Its 215,360 logic cells provide parallel capacity for motion control, state machines, protocol handling, and diagnostics, while 13,140 Kb of block RAM supports buffering and data histories. The 285-I/O configuration simplifies connection of digital sensors, actuators, and field buses. The industrial-grade suffix identifies the device for extended-temperature industrial use, but the implementation must still verify supply rails, timing margin, and the exact temperature limits in the manufacturer documentation.
সুপারিশকৃত
Smart Instrumentation
The AMD XC7A200T-L1SBG484I is suitable for smart instruments that acquire, process, and transmit measurements within a compact embedded chassis. The 13,140 Kb of block RAM can hold acquisition buffers, calibration tables, or communication queues, while 215,360 logic cells can run filtering, interpolation, protocol conversion, and control functions in parallel. With 285 I/O, the device supports high-speed digital capture, external memory interfaces, clocks, and user controls. Designers should partition deterministic acquisition functions from noncritical background processing and confirm setup and hold requirements for every high-speed interface.
সুপারিশকৃত
Communications and Network Interface
XC7A200T-L1SBG484I can implement parallel packet processing, protocol conversion, and data-plane buffering in communications equipment. Its programmable logic resources allow multiple channels or aggregation functions to be integrated, and 13,140 Kb of block RAM provides dedicated storage instead of consuming general routing resources. The 285-I/O device in SBG484 supports board-level data paths and external interfaces. Clocking strategy is critical because MMCM and PLL resources must be planned with the same package-specific pin assignments and validated for the selected L1 operating conditions.
সুপারিশকৃত
Embedded Vision and Image Processing
The XC7A200T-L1SBG484I provides enough parallel fabric for embedded image pipelines that combine pixel transport, thresholding, filtering, feature extraction, and control logic. Dedicated block RAM can hold line buffers or multi-frame samples, while the 215,360 logic cells support concurrent operations that would otherwise require several fixed-function devices. Its 285 I/O permit direct connection to image sensors, capture devices, and digital processing interfaces. The implementation should use AMD clocking and timing guidance, pipeline high-volume data paths, and verify board-level signal integrity between the FPGA and external memory.
সুপারিশকৃত
Data Acquisition Systems
A 484-ball XC7A200T-L1SBG484I can consolidate high-speed acquisition, digital filtering, calibration, timestamping, and data transfer in one FPGA. The 13,140 Kb of block RAM supports sample buffering and intermediate processing stages, while 285 I/O provide connectivity for converters, clocks, triggers, memory, and host interfaces. Parallel DSP pipelines can sustain real-time workloads without offloading every operation to a processor. Engineers should verify high-speed I/O timing, define clock-domain crossings explicitly, use FPGA resources for elastic buffers, and reserve adequate decoupling and thermal management around the large BGA package.
সুপারিশকৃত
Test and Measurement Equipment
The XC7A200T-L1SBG484I is appropriate for programmable test equipment that combines pattern generation, response analysis, sequencing, and communications. Its 215,360 logic cells can execute several concurrent test channels, while block RAM supports capture windows, expected-response tables, and trace storage. The 285-I/O SBG484 device offers enough connections for instruments, trigger logic, memories, and user interfaces. A practical design separates acquisition, stimulus, and control pipelines, constrains timing-critical paths, and uses MMCM or PLL outputs only after confirming package-pin compatibility and L1 timing requirements.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7A200T-L1SBG484I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7A200T-2SBG484I | XC7A200T-3SBG484E |
|---|---|---|---|
| Package | SBG484, 484-ball FCBGA | SBG484, 484-ball FCBGA | SBG484, 484-ball FCBGA |
| Brand | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Block RAM | 13,140 Kb | 13,140 Kb | 13,140 Kb |
| User I/O | 285 I/O | 285 I/O | 285 I/O |
| Speed Designation | L1 | -2 | -3 |
| Temperature Suffix | I, industrial | I, industrial | E, extended |
মূল পার্থক্যসমূহ
- Large same-family logic capacity in SBG484 (বনামXC7A200T-2SBG484I)
- Industrial-grade ordering option (বনামXC7A200T-3SBG484E)
- Lower speed designation supports the L1 positioning (বনামXC7A200T-3SBG484E)
ডিজাইন নোট
Use the AMD Artix-7 Package Device Pinout Files for the exact SBG484 ball map, and cross-check every power, ground, configuration, clock, and user-I/O assignment before PCB routing. The 484-ball FCBGA package requires careful escape routing from the device grid. Reserve the documented decoupling positions and follow the package-specific power and ground-plane guidance in the manufacturer datasheet.
Do not substitute the voltage requirements of a standard -1, -2, or -3 device for the L1 grade without checking the Artix-7 datasheet. Plan the complete power tree for core, I/O, and auxiliary rails, including decoupling, startup sequencing, and the required configuration behavior. Validate worst-case voltage, current, and power-state transitions with the exact L1 device before releasing the board.
Estimate device dissipation only after obtaining the selected XC7A200T configuration, utilization, clocking, and I/O activity from the Vivado implementation report. A large FPGA can consume substantial power even when only a fraction of its logic is active. Use the resulting value with the package thermal information to size copper areas, via arrays, airflow, or cooling, and confirm that the junction-temperature requirement is met at the highest ambient temperature.
Assign high-speed interfaces through the package-aware Vivado flow and preserve the device's documented clock-capable pins. Use MMCM and PLL outputs only after confirming their relationship to the selected clock pins. For external memory or high-speed I/O, apply source-synchronous routing rules, match length where required, control skew through placement, and verify the interface with post-route timing analysis.
The target is not interchangeable with XC7A200T-L1FBG484I solely because both are listed as Artix-7 devices: SBG484 and FBG484 use different package arrangements. Likewise, changing from L1 to -2 or -3 alters the speed and possibly voltage class. Treat any cross-reference as a design-migration project requiring pinout, timing, power, configuration, and bitstream review rather than as a mechanical substitution.
কমপ্লায়েন্স তথ্য
The exact-part product record identifies EU RoHS compliance, REACH compliance, and DRC Conflict Free status. It does not establish AEC-Q100 qualification, lead-free status, halogen-free status, or conflict-minerals compliance.