XCKU15P-1FFVA1156E - Kintex UltraScale+ FPGA | AMD
MPN: XCKU15P-1FFVA1156E ✓ সক্রিয়XCKU15P-1FFVA1156E সারাংশ
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and peripheral functions are configured after fabrication. The Kintex UltraScale+ family occupies the FPGA portion of the broader programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for multiple workloads, allowing hardware updates, parallel processing, protocol adaptation, and product differentiation without changing the printed circuit board.
The XCKU15P device provides a large programmable-logic fabric and substantial general-purpose input/output capacity. Its 1,143,450 logic cells support concurrent datapaths, control logic, signal processing, and interface bridging, while the 516 listed I/Os support board-level connectivity. The device also integrates on-chip UltraRAM, which can reduce external-memory cost and improve access locality for data-intensive designs. Flexible power options are intended to help balance performance and system-level energy consumption.
The exact interface mix and performance depend on the selected speed grade, package pins, configuration method, power architecture, and Vivado design implementation. UltraScale+ devices support high-speed transceivers and programmable logic, but a specific design may not expose every transceiver or I/O because package assignments and power constraints determine availability. Designers should use AMD package files, the device datasheet, and UG475 or UG579 guidance when assigning balls and validating board-level connectivity.
Typical uses include high-speed data acquisition, industrial image processing, communications infrastructure, test and measurement, defense electronics, and embedded vision. The large logic fabric is particularly useful when an application requires parallel algorithms, low-latency pipeline processing, multiple protocol interfaces, or hardware resources that can be reused across product variants. A 1156-ball FCBGA also requires careful PCB layout because its fine pitch and numerous power, ground, and high-speed balls increase assembly and routing complexity.
The principal design trade-off is performance and integration against package complexity. Designers must provide all required power rails, decoupling, configuration storage or boot support, clocking, and appropriate high-speed layout techniques. Power and thermal planning should be performed from the final utilization and timing results because activity, I/O load, and configured resource mix materially affect total dissipation.
This page combines the exact manufacturer and distributor identifiers, package characteristics, verified resource counts, practical application guidance, and a conservative replacement analysis. It also distinguishes a genuine same-footprint replacement from related FPGA variants that require design-specific validation before substitution.
এর জন্য ড্রপ-ইন বিকল্প XCKU15P-1FFVA1156E — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XCKU15P-1FFVA1156E (একই form factor এবং footprint) — পার্থক্য রয়েছে Package.
XCKU15P-1FFVA1156I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XCKU15P-1FFVA1156E4579
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XCKU15P-1FFVA1156C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XCKU15P-1FFVA1156E সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Kintex UltraScale+ FPGA |
| Programmable Logic Cells | 1,143,450 cells |
| Configurable Logic Blocks | 65,340 CLBs |
| User Inputs/Outputs | 668 inputs/outputs |
| Package I/O Count | 516 I/Os |
| প্যাকেজ | 1156-ball FCBGA |
| Minimum Supply Voltage | 0.825 V |
| Speed Grade | -1 |
| Integrated Memory | UltraRAM |
| Device Family | Kintex UltraScale+ |
| Programmable Logic Type | FPGA |
| মাউন্টিং টাইপ | Surface mount |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
XCKU15P-1FFVA1156E 1156-ball fcbga পিন কনফিগারেশন গাইড
XCKU15P-1FFVA1156E (1156-ball fcbga প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XCKU15P-1FFVA1156E.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XCKU15P-1FFVA1156E এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Speed Data Acquisition, Industrial Image Processing, Communications Infrastructure, Test and Measurement Instrumentation, Communications and Control, Aerospace and Defense Instrumentation.
High-Speed Data Acquisition
The XCKU15P-1FFVA1156E fits high-speed acquisition systems that need many parallel channels and real-time processing. Its 1,143,450 logic cells can support sampling pipelines, digital filtering, calibration, packetization, and trigger logic, while 516 package I/Os provide extensive connectivity to converters, memory, and external interfaces. Integrated UltraRAM can retain working data close to processing elements, reducing some transfers to external memory. The design benefit is scalable parallel throughput without relying on a fixed processor architecture. The main engineering trade-off is the complexity of a 1156-ball FCBGA, including multilayer routing, controlled-impedance interconnects, extensive power delivery, and thermal validation under sustained acquisition activity.
সুপারিশকৃত
Industrial Image Processing
The XCKU15P-1FFVA1156E is suitable for industrial vision systems that combine sensor ingestion with concurrent image processing. The large programmable fabric can implement multiple pipelines for preprocessing, feature extraction, defect detection, and control, while 516 I/Os support cameras, capture devices, memory, and programmable logic controllers. UltraRAM is useful for line buffers, feature caches, and temporary image data, potentially reducing external-memory bandwidth pressure. Compared with a smaller FPGA, this device provides additional parallelism and headroom for multiple camera channels. Its trade-off is greater power, package complexity, and PCB cost, so designers should estimate utilization and thermal dissipation from the actual image pipeline before finalizing the architecture.
সুপারিশকৃত
Communications Infrastructure
The XCKU15P-1FFVA1156E can support communications equipment requiring programmable packet processing, high aggregate I/O, and dedicated hardware logic. Its 1,143,450 logic cells allow concurrent header parsing, classification, queue control, traffic shaping, and monitoring functions, while the 516-I/O package can connect multiple data paths and control interfaces. Integrated UltraRAM can support local buffering and lookup structures. The benefit is deterministic parallel throughput and the ability to update protocols through bitstream changes. The trade-off is that production designs must account for complete clocking, transceiver, reference-clock, PCB, and power requirements, because the device is not interchangeable with smaller FPGAs merely because both support programmable logic.
সুপারিশকৃত
Test and Measurement Instrumentation
The XCKU15P-1FFVA1156E fits sophisticated test and measurement instruments requiring flexible sequencing, wide parallel capture, and real-time analysis. Programmable logic can implement counters, timing engines, pattern generation, digital signal processing, and control functions, while the 516 package I/Os support tester channels and peripheral instruments. UltraRAM provides low-latency storage for samples and intermediate results. A primary advantage is the ability to add instrumentation functions through programmable logic instead of extending discrete circuitry. The design consideration is power planning: utilization, I/O activity, and clock rates determine actual dissipation, so thermal design and rail sequencing should be evaluated using final implementation data.
সুপারিশকৃত
Communications and Control
The XCKU15P-1FFVA1156E is appropriate for communications and control systems where programmable hardware must combine protocol conversion, timing, and supervisory logic. Its 65,340 configurable logic blocks allow designers to isolate high-rate data paths from lower-speed control functions, reducing contention in a shared processor architecture. The 516-I/O package provides substantial board-level connectivity, and UltraRAM can support local message queues, state machines, and buffering. Compared with a fixed microcontroller or ASIC, the FPGA permits field updates and accommodates evolving interfaces. The trade-off is the need for a formal design flow, verified pin constraints, configuration storage, and careful separation of clocks and high-speed signals on the PCB.
সুপারিশকৃত
Aerospace and Defense Instrumentation
The XCKU15P-1FFVA1156E can support instrumentation and mission-data processing systems that need programmable logic, extensive I/O, and reconfigurable hardware. Its 1,143,450 logic cells can host telemetry encoding, navigation data processing, fault monitoring, and communication framing concurrently, while integrated UltraRAM can accelerate local data access. Programmability supports algorithm updates and adaptation across system variants. The principal trade-off is that qualification, temperature grade, radiation requirements, and long-term availability must be evaluated for the specific program. The standard E-suffix ordering code should not be assumed to satisfy aerospace or defense qualification requirements without confirmation from the manufacturer.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XCKU15P-1FFVA1156E — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XCKU15P-1FFVA1156I | XCKU15P-1FFVA1156E4579 | XCKU15P-1FFVA1156C |
|---|---|---|---|---|
| Package | 1156-ball FCBGA | 1156-ball FCBGA - same | 1156-ball FCBGA - same | 1156-ball FCBGA - same |
| Brand | AMD | AMD | AMD | AMD |
| Programmable Logic Cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells |
| Configurable Logic Blocks | 65,340 CLBs | 65,340 CLBs | 65,340 CLBs | 65,340 CLBs |
| Package I/O Count | 516 I/Os | 516 I/Os | 516 I/Os | 516 I/Os |
| Listed Inputs/Outputs | 668 inputs/outputs | 668 inputs/outputs | 668 inputs/outputs | 668 inputs/outputs |
| Speed Grade | -1 | -1 - same | -1 - same | -1 - same |
| Minimum Supply Voltage | 0.825 V | 0.825 V | 0.825 V | 0.825 V |
| Temperature Qualification | Extended-temperature E suffix | Industrial-temperature I suffix | Extended-temperature E suffix with added suffix | Commercial-temperature C suffix |
| Integrated Memory | UltraRAM | UltraRAM | UltraRAM | UltraRAM |
মূল পার্থক্যসমূহ
- Large programmable-logic and I/O resource envelope (বনামXCKU9P-L1FFVE900I)
- Same-package option with industrial qualification (বনামXCKU15P-1FFVA1156I)
- On-chip UltraRAM support (বনামXC7A200T-3SBG484E)
ডিজাইন নোট
Plan the XCKU15P-1FFVA1156E power tree from the final resource utilization rather than from the nominal minimum supply of 0.825 V. Separate core, auxiliary, and I/O rails may require distinct sequencing and regulation characteristics. Validate steady-state and transient limits against the manufacturer power guidance, then include the worst-case FPGA activity and configured I/O load when sizing supply headroom.
The 1156-ball FCBGA requires a multilayer PCB with controlled-impedance routing, short return paths, dense decoupling, and careful ball-escape planning. Place the decoupling network directly beneath the device and avoid long supply-current loops. Use the manufacturer package files and reference design guidance to preserve the escape geometry because changing a ball assignment can invalidate high-speed timing and power-integrity results.
Estimate junction temperature from final utilization, clocking, I/O activity, and the selected board construction. High logic activity and sustained high-speed I/O can increase power beyond a design based on static resource totals. Provide copper area, thermal vias, airflow, or other cooling appropriate to the enclosure, and verify the completed assembly across the intended ambient and operating conditions.
Use the package pinout files and device constraints to assign clock, transceiver, and high-speed I/O lanes. Account for clock skew, return loss, insertion loss, and adjacent signal coupling during PCB stack-up selection. The device supports high-speed communication functions, but those capabilities require controlled-impedance routing and verified power and reference-clock arrangements rather than only logical pin assignment.
কমপ্লায়েন্স তথ্য
Compliance status was not stated for this exact MPN in the available product information and requires confirmation from the manufacturer.