XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4500F100K1024ACXUMA1 ✓ সক্রিয়XMC4500F100K1024ACXUMA1 সারাংশ
A microcontroller is a semiconductor device that integrates a processor core, memory, programmable peripherals, and communication interfaces onto one package. The Cortex-M4 processor belongs to the Arm embedded processor family and executes instructions from tightly controlled memory while supervising timers, serial interfaces, analog peripherals, Ethernet, and external interrupt sources. Within the system hierarchy, this device is a microcontroller, embedded processor, programmable controller, and power-management-aware semiconductor.
The XMC4500F100K1024ACXUMA1 provides 1 MB of Flash memory, a 120 MHz maximum CPU frequency, and 32-bit processing in an industrial-oriented package. Its Ethernet support makes the device suitable for connected equipment that must exchange data over a wired network. The exposed pad beneath the PG-LQFP-100-11 package provides a direct thermal path from the die to the PCB, allowing heat to be removed through copper and, where necessary, an external heat spreader.
The Arm Cortex-M4 architecture is designed for efficient embedded control and signal-processing workloads. Its exception model supports deterministic interrupt handling, while integrated peripherals reduce the need for discrete interface components. The Ethernet subsystem adds a network interface without requiring a separate communication controller. This combination makes the device useful for industrial controllers, gateways, embedded servers, and connected sensor platforms while preserving a single-chip control architecture.
Typical applications include industrial Ethernet gateways, programmable automation controllers, building and energy-management equipment, connected sensor hubs, motor and process-control systems, and communications equipment. The 120 MHz processing rate supports responsive control loops, protocol processing, and supervisory logic. The 1 MB Flash capacity allows firmware, configuration data, and application code to be stored locally, reducing system complexity for embedded networking products.
PCB implementation should follow the Infineon pin-description table and reference-manual guidance for power, ground, decoupling, and exposed-pad connections. Place input and bulk-decoupling capacitors close to their associated supply pins, provide a low-impedance ground plane, and thermally couple the exposed pad to a sufficiently large copper area. Validate the final board under maximum processor activity, Ethernet traffic, and the highest intended ambient temperature.
This product page combines the official ordering information with practical architecture guidance, application fit, package considerations, and parameter-level replacement analysis. It is structured to help engineers identify whether the 120 MHz Cortex-M4 core, 1 MB Flash configuration, Ethernet integration, and 100-pin industrial package align with a specific embedded-control design.
এর জন্য ড্রপ-ইন বিকল্প XMC4500F100K1024ACXUMA1 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
XMC4500-F100K1024-AB
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XMC4500-F100K1024-AA
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XMC4500-F100K1024-AC
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XMC4500F100F1024ABXQMA1
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XMC4500-F100K1024-CA
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XMC4500F100K1024ACXUMA1 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Instruction Width | 32 bit |
| Embedded Flash | 1 MB (1M x 8) |
| Ethernet Support | Integrated Ethernet |
| প্যাকেজ | PG-LQFP-100-11 |
| পিন সংখ্যা | 100 pins |
| Exposed Pad | Present |
| মাউন্টিং টাইপ | Surface mount |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| Product Series | XMC4000 |
| Device Designation | XMC4500-F100K1024-AC |
| Core Count | 1 core |
| Industrial Positioning | Industrial application |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
XMC4500F100K1024ACXUMA1 pg-lqfp-100-11 পিন কনফিগারেশন গাইড
XMC4500F100K1024ACXUMA1 (pg-lqfp-100-11 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XMC4500F100K1024ACXUMA1.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XMC4500F100K1024ACXUMA1 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Ethernet Gateway, Connected Sensor Hub, Programmable Automation Controller, Building and Energy Management Controller, Motor and Process Control System, Embedded Network Service Controller.
Industrial Ethernet Gateway
The XMC4500F100K1024ACXUMA1 fits an industrial Ethernet gateway because its 120 MHz Arm Cortex-M4 core can supervise protocol conversion, local control logic, diagnostics, and configuration handling. Integrated Ethernet reduces the need for a separate network controller, while the 1 MB Flash provides space for gateway firmware and configuration tables. A typical design places the MCU beside a network PHY, signal-conditioning circuitry, and protected industrial I/O. The principal engineering trade-off is that the MCU does not replace a PHY, isolation components, surge protection, or a regulated power supply, so those functions must be designed separately.
সুপারিশকৃত
Connected Sensor Hub
The XMC4500F100K1024ACXUMA1 is suitable for a connected sensor hub that must acquire, filter, and forward measurements from multiple industrial sensors. Its 120 MHz Cortex-M4 performance supports time-critical sampling and background network tasks, and its 1 MB Flash can retain firmware, calibration constants, and mapping information. The 100-pin LQFP footprint also provides a substantial pin budget for digital I/O, serial sensors, and status indicators. Designers should use the manufacturer pin-assignment table to avoid conflicts between analog-capable and Ethernet-related functions, while providing separate protection for externally accessible sensor lines.
সুপারিশকৃত
Programmable Automation Controller
The XMC4500F100K1024ACXUMA1 can serve as the central controller in a programmable automation module because its 120 MHz Cortex-M4 core combines deterministic interrupt handling with substantial local Flash. It can supervise digital outputs, process input states, execute communication tasks, and implement machine-specific control sequences without a separate processor. Ethernet connectivity allows configuration and status information to be exchanged with supervisory equipment. The PG-LQFP-100-11 package exposes more pins than a compact MCU package, supporting several peripheral functions, but every externally connected actuator line still requires appropriate isolation, drive circuitry, and protective components.
সুপারিশকৃত
Building and Energy Management Controller
The XMC4500F100K1024ACXUMA1 fits a building or energy-management controller that must consolidate sensor data, maintain operating schedules, and report consumption over a network. The 1 MB Flash supports local firmware and parameter storage, while the integrated Ethernet interface supports connection to gateways or supervisory systems. Its 120 MHz core leaves processing capacity for filtering, event handling, and communication alongside control functions. A practical implementation should use the exposed pad as a continuous thermal path and keep Ethernet magnetics and power-conversion stages separated from sensitive control traces to reduce noise and heat coupling.
সুপারিশকৃত
Motor and Process Control System
The XMC4500F100K1024ACXUMA1 is appropriate for supervisory motor and process-control systems that require a high-performance control core alongside network communications. Its 120 MHz Arm Cortex-M4 processing supports rapid task execution, while the 100-pin package offers numerous digital and peripheral connections for encoders, control signals, and machine interfaces. Integrated Ethernet permits remote diagnostics and production-data access. The MCU should supervise rather than directly absorb high-power motor energy; power conversion, gate driving, current sensing, and safety functions require appropriately rated external hardware and protection.
সুপারিশকৃত
Embedded Network Service Controller
The XMC4500F100K1024ACXUMA1 can function as an embedded network service controller for configuration access, logging, remote diagnostics, and protocol management. The 120 MHz Cortex-M4 core is suitable for concurrent control and network duties, and the 1 MB Flash allows local code and nonvolatile configuration to be consolidated. Its integrated Ethernet interface provides the core network connection, while the large LQFP package supports service-mode interfaces and status controls. Production designs should implement secure boot, controlled firmware updates, watchdog policy, and network segmentation appropriate to the deployed equipment rather than relying solely on physical isolation.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XMC4500F100K1024ACXUMA1 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XMC4500-F100K1024-AB | XMC4500-F100K1024-AA | XMC4500-F100K1024-AC | XMC4500F100F1024ABXQMA1 | XMC4500-F100K1024-CA |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Product Positioning | Industrial Arm Cortex-M4 microcontroller | Industrial Arm Cortex-M4 microcontroller | Industrial Arm Cortex-M4 microcontroller | Industrial Arm Cortex-M4 microcontroller | XMC4500F100F1024 configuration | Industrial Arm Cortex-M4 microcontroller |
মূল পার্থক্যসমূহ
- Higher operating-temperature coverage in the AC grade (বনামXMC4500-F100K1024-AB)
- Integrated Ethernet reduces external controller overhead (বনামXMC4500F100F1024ABXQMA1)
- Single-chip combination of control processing and connectivity (বনামXMC4500-F100K1024-AA)
ডিজাইন নোট
Treat the exposed pad as a mandatory thermal and electrical connection. Place a thermal-via array directly beneath the pad, retain continuous ground-plane area beneath the package, and use as much copper as the board outline permits. The exact maximum junction temperature and package thermal resistance must be obtained from the manufacturer datasheet. Validate the assembly with the processor, Ethernet interface, and adjacent power stages operating at their worst expected loading.
Implement the supply network with short, low-inductance paths and place local ceramic decoupling capacitors close to the associated power pins. Separate noisy switching or Ethernet-return-current areas from sensitive analog and clock routing. Keep the exposed-pad via field within the manufacturer land-pattern rules because excessive or poorly arranged vias can impair soldering, thermal conduction, and assembly yield. Review the final layout against the Infineon reference-manual guidance.
Route clock, reset, debug, and high-speed Ethernet-adjacent signals with continuous reference planes and avoid crossings through split power or ground regions. Follow the manufacturer recommendations for external crystal or clock components, oscillator startup, and Ethernet PHY implementation. When Ethernet magnetics are used, preserve the required separation between copper, chassis or shield connections, and sensitive signals so common-mode energy is not coupled into the MCU region.
Do not substitute the device solely because the XMC4500, F100, K1024, and package families appear similar. Verify the complete ordering code, temperature grade, Flash configuration, exposed-pad land pattern, and production or reel identifier. Check the errata documents for the exact derivative and validate startup, Ethernet operation, clock configuration, and peripheral assignments before releasing a production PCB.
কমপ্লায়েন্স তথ্য
No exact ordering-code compliance declarations are stated in the retrieved manufacturer and distributor descriptions. Confirm current RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification statements with Infineon before production release.