Integrated Circuits

PIC24EP32GP204T-I/ML

PIC24EP32GP204T-I/ML - 16-bit 70 MIPS MCU, 32KB Flash | Microchip

The Microchip PIC24EP32GP204T-I/ML is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS core performance, 32 KB (10.7K x 24) of Flash program memory and 4 KB RAM in a 44-pin QFN (8x8) package. It runs from a 3.0 V to 3.6 V supply, offers 35 digital I/O pins, and integrates an ADC with both 10-bit and 12-bit modes, op-amps, comparators, CTMU and a Peripheral Trigger Generator (PTG). A 16-bit PIC microcontroller (MCU) is a member of the microcontroller family built on a 16-bit modified Harvard architecture with separate program and data buses. PIC24E devices sit in the broader taxonomy: 16-bit MCU -> PIC24 family -> PIC24E sub-family -> PIC24EP "GP" general-purpose series. The 70 MIPS core executes most instructions in one cycle, while the 16-bit data path, large register file and DSP-class instructions deliver significantly more throughput per MHz than 8-bit alternatives. Key features of this variant include a 70 MIPS (60 MHz) CPU with DSP instructions, 32 KB self-programmable Flash, 4 KB SRAM, two op-amps usable for signal conditioning before the ADC, up to 35 I/O, multiple serial interfaces (UART, SPI, I2C) and a 12-bit ADC with 9 channels minimum. The 44-QFN (8x8 mm) package includes an exposed pad (EP) for thermal dissipation, and the device is qualified for the -40C to +85C industrial temperature range. Architecturally, the PIC24EP "GP" series combines a deterministic single-cycle engine with rich analog integration: two operational amplifiers can be paired with the ADC for sensor-interface front-ends, while the CTMU provides time-based touch and current measurement. The PTG can sequence peripheral events autonomously, offloading timing-critical tasks from the CPU. Compared with PIC24F devices, the EP core adds DSP instructions and a much faster instruction rate. Typical applications include industrial sensor conditioning, motor-control signal chains, LED lighting controllers, USB-to-UART bridges using the on-chip UART, and general-purpose embedded control in consumer or industrial products. The combination of integrated op-amps, PTG and 70 MIPS throughput also makes the part well-suited to closed-loop control tasks such as BLDC commutation and PID loops. When designing with this part, take care to observe the 3.0 V to 3.6 V supply window - this is NOT a 5 V tolerant MCU. Decouple VDD/AVDD with 100 nF and 10 uF ceramics placed close to the pins, bond the exposed pad to a continuous ground plane for thermal relief, and configure unused I/O as outputs to minimise current draw. The "T" suffix denotes tape-and-reel packaging; the "I" in the operating range indicates the industrial -40C to +85C grade. This page consolidates distributor pricing, pin-compatible drop-in alternatives in the same 44-QFN (8x8) footprint, and practical design notes that go beyond the manufacturer datasheet summary.

RFQ Contact

PIC24EP32GP204T-I/MV

PIC24EP32GP204T-I/MV - 70 MIPS 16-Bit MCU, 32KB Flash | Microchip

The Microchip Technology PIC24EP32GP204T-I/MV is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS of CPU performance with 32 KB of Flash program memory (10.7K x 24 words) and 4 KB of SRAM, housed in a 48-pin UQFN (6x6 mm) package with exposed thermal pad. The integrated peripherals include operational amplifiers, comparators, CTMU (Charge Time Measurement Unit), a Peripheral Trigger Generator (PTG), and high-speed PWM, all designed for advanced analog and motor-control applications. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and a rich set of on-chip peripherals aimed at embedded control tasks. The PIC24E family sits in the hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> Microchip MCU portfolio -> embedded processor. The PIC24EP 'GP' (General Purpose) sub-line emphasizes high analog performance and flexible peripherals rather than motor-control DSP features. Key features include a 70 MIPS (60 MHz) modified Harvard core with DSP-like instructions, two on-chip op-amps usable as front-end gain stages for the ADC, multiple comparators with selectable references, and the Peripheral Trigger Generator that sequences ADC, PWM, and I/O events without CPU intervention. The device operates from 3.0 V to 3.6 V and provides up to 35 I/O pins with PPS (Peripheral Pin Select) flexibility. The architecture uses a 16-bit modified Harvard bus with hardware multiply/divide, zero-overhead looping, and deterministic interrupt latency, enabling high-throughput signal processing. Internal oscillators and PLLs reduce external component count, while the integrated CTMU supports capacitive touch and time-of-flight measurements with sub-microsecond resolution. Typical applications include industrial sensor conditioning, closed-loop motor control (PMSM, BLDC), portable medical instrumentation, LED lighting controllers, and consumer appliances where analog front-end integration simplifies the BOM. When designing with this MCU, observe the 3.0-3.6 V supply window, place decoupling capacitors within 5 mm of each VDD/VSS pair, and use the UQFN exposed pad as the primary thermal and electrical return. Program via ICSP using PGECx/PGEDx pins; the 'T' suffix denotes tape-and-reel packaging. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact

PIC24EP32MC202-E/MM

PIC24EP32MC202-E/MM - 60 MIPS 16-Bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC202-E/MM is a 16-bit microcontroller from the PIC® 24EP family, designed for high-performance precision motor control. It delivers 60 MIPS at 70 MHz CPU clock, integrates 32 KB (10.7K x 24) of Flash program memory, 4 KB of RAM, and is housed in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad. The device is AEC-Q100 qualified for automotive applications and supports an operating voltage range of 3.0V to 3.6V with an extended temperature grade of -40°C to +125°C. A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (RAM), peripherals, and I/O on one silicon die. Within the broader semiconductor taxonomy it sits below 32-bit MCUs and above 8-bit MCUs in processing capability, while still offering lower power and deterministic interrupt latency than most 32-bit Cortex-M devices. The 16-bit PIC24E architecture uses a modified Harvard design with a 24-bit instruction word and 16-bit data path, enabling DSP-class operations and high-throughput motor-control math in a single cycle. Key differentiating features of the PIC24EP32MC202-E/MM include up to six 10/12-bit ADC channels, three op-amps, three analog comparators, a Peripheral Trigger Generator (PTG), and dedicated Motor Control PWM (MCPWM) outputs. The integrated op-amps and comparators remove the need for external analog signal conditioning in current-sense and back-EMF sensing topologies. The 60 MIPS performance envelope, combined with the 16-bit DSP engine, lets the device execute field-oriented control (FOC) loops in real time for BLDC and PMSM motors. Typical target applications are automotive and industrial motor drives, including HVAC blowers, electric water pumps, fuel pumps, BLDC fans, e-bike controllers, and small servo drives. The 28-QFN package is footprint-compatible with the rest of the PIC24EP32MC2xx family, allowing a single PCB to support multiple motor power tiers by swapping only the MCU. When designing with this part, place the exposed pad (EP) on the QFN package over a continuous copper pour with at least 6 thermal vias to the inner ground plane to meet the -40°C to +125°C extended-grade thermal envelope. Decouple VDD with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, and follow the datasheet guidance for the analog VDD/VSS pair (AVDD/AVSS) when using the on-chip ADCs and op-amps. This page synthesizes distributor pricing tiers, drop-in same-package alternatives, and PCB-layout design notes that complement the official Microchip datasheet for the PIC24EP32MC202-E/MM.

RFQ Contact

PIC24EP32MC202-E/SO

PIC24EP32MC202-E/SO - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC202-E/SO is a 16-bit PIC24E family microcontroller engineered for high-performance motor control applications, featuring 32KB of Flash program memory, 4KB of RAM, and a 60 MIPS (70 MIPS with DSP instructions) modified Harvard architecture CPU. Housed in a 28-pin SOIC (0.295"/7.50mm body width) package, this MCU integrates enhanced on-chip peripherals including a 6-channel ADC with 10-bit/12-bit configurable resolution, motor control PWM modules, quadrature encoder interfaces, and 5V-tolerant I/O, enabling precision motor control systems that are energy efficient, quieter in operation, and have a great range and extended life. Operating voltage spans 3.0V to 3.6V with -40C to +125C extended industrial temperature range, meeting AEC-Q100 Grade 0 automotive-grade reliability requirements. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals. Within the broader semiconductor hierarchy, an MCU sits under microcontrollers -> embedded processors -> digital ICs. The PIC24E family specifically targets digital signal control (DSC) workloads combining microcontroller simplicity with DSP throughput for motor control, power conversion, and audio processing. Key differentiating features of the PIC24EP32MC202 include 70 MIPS execution with single-cycle MAC operations, dedicated motor control PWM with complementary outputs and dead-band control, 6-channel 12-bit ADC with simultaneous sampling at up to 1.1 Msps, integrated op-amps and comparators for current sensing, and a 32KB self-programmable Flash with ECC. These peripherals are purpose-built for closed-loop FOC, sinusoidal commutation, and sensorless control algorithms in BLDC, PMSM, and ACIM drives. Architecturally, the PIC24E uses a 16-bit data path with 24-bit instruction words, dual-bus Harvard architecture for simultaneous Flash/RAM access, and a deterministic interrupt controller. The integrated DSP engine enables real-time FFT, IIR/FIR filtering, and Park/Clarke transforms on-chip, eliminating external DSP components in motor control loops. Typical applications include field-oriented control (FOC) of BLDC and PMSM motors, sensorless fan and pump controllers, HVAC blower drives, e-bike and e-scooter traction inverters, white-goods compressor drivers, and small industrial servo drives. The combination of AEC-Q100 qualification and extended temperature range allows deployment in automotive body and chassis subsystems. When designing with this part, populate the configuration bits early in firmware to lock the oscillator and watchdog before any code that depends on timing. Allocate PWM time bases so center-aligned mode and dead-band generators do not collide, and verify ADC sampling alignment with the PWM carrier to avoid current-sense jitter. This page synthesizes DigiKey distributor pricing, Microchip cross-reference equivalents, and practical motor-control design notes not found in the standalone datasheet.

RFQ Contact

PIC24EP32MC202-E/SP

PIC24EP32MC202-E/SP - 70MIPS 16-bit Motor Control MCU, 32KB Flash | Microchip

The Microchip PIC24EP32MC202-E/SP is a 16-bit 70 MIPS PIC24E Motor Control microcontroller housed in a 28-pin SPDIP (Skinny Plastic DIP) package, engineered specifically for high-performance precision motor control systems. It integrates 32 KB (10.7K x 24) of Flash program memory, 4 KB of SRAM, and a 60 MIPS core at 70 MHz operating speed. The device operates from a 3.0 V to 3.6 V single supply and is qualified to the AEC-Q100 standard for automotive applications, making it suitable for safety-critical motor control designs. The PIC24EP32MC202 belongs to the broader 16-bit microcontroller family, a class of MCUs that bridges the gap between 8-bit devices and 32-bit ARM Cortex-M parts. Within the embedded hierarchy, PIC24E sits between PIC16/PIC18 8-bit families and dsPIC33/PIC32 32-bit devices, offering higher performance (70 MIPS) than 8-bit MCUs while retaining a simpler toolchain and lower cost than 32-bit alternatives. The 'E' suffix denotes the Enhanced PIC24 family with DSP-like instructions, while the 'MC' indicates Motor Control variants with dedicated PWM, op-amp, and quadrature encoder interface peripherals. Key features of the PIC24EP32MC202 include a high-speed PWM module (MCPWM) with up to 7 PWM outputs, integrated operational amplifiers for current sensing, three on-chip analog comparators, a Peripheral Trigger Generator (PTG), and 12-bit ADC with dual sample-and-hold. The motor control PWM supports complementary, center-aligned, and edge-aligned modes with hardware dead-time generation, enabling direct drive of three-phase inverter bridges without external logic. The 60 MIPS core (70 MHz with PLL) provides the computational headroom needed for field-oriented control (FOC) and sensorless algorithms. Architecturally, the PIC24E core uses a 16-bit modified Harvard architecture with a 24-bit instruction word, allowing efficient C code compilation through Microchip's MPLAB XC16 compiler. The modified Harvard bus separates instruction and data paths to maximize throughput, while integrated DSP instructions accelerate the multiply-accumulate operations used in Park/Clark transforms for FOC. The integrated op-amps and comparators allow direct current-sense feedback from low-side shunt resistors, eliminating external analog conditioning in typical BLDC and PMSM drive designs. Typical applications include BLDC and PMSM motor control for appliances, drones, e-bikes, HVAC fans, automotive pumps and fans, and industrial servo drives. The integrated op-amps and MCPWM reduce BOM count for sensorless and sensored FOC implementations. The 28-pin SPDIP package supports through-hole assembly for legacy industrial designs and easy prototyping on breadboards. When designing with this device, ensure the ADC and op-amp reference voltages are properly decoupled to minimize noise coupling into current-sense signals. The MCPWM module requires careful configuration of dead-time registers to prevent shoot-through in half-bridge stages. The AEC-Q100 qualification supports automotive deployment, but designers should still apply ISO 26262 functional safety analysis for ASIL-rated systems. This page synthesizes distributor pricing, drop-in alternative analysis, application guidance, and design notes not consolidated on the manufacturer product page, providing a single reference for engineers and procurement teams.

RFQ Contact

PIC24EP32MC202-I/MM

PIC24EP32MC202-I/MM - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP32MC202-I/MM is a 16-bit PIC24E Motor Control microcontroller delivering 70 MIPS of computational throughput, 32 KB of Flash program memory and 4 KB of RAM, housed in a 28-pin QFN-S (MM) 6x6 mm exposed-pad package. The device integrates high-speed PWM, quadrature encoder interface (QEI), two operational amplifiers, three analog comparators and a peripheral trigger generator (PTG) to support precision motor-control closed-loop designs. A 16-bit microcontroller is a single-chip computer with a 16-bit data path, register file and ALU that offers a strong middle ground between 8-bit MCUs (cost-effective, simple) and 32-bit MCUs (highest performance). Within the embedded taxonomy, the PIC24EP32MC202 belongs to the PIC24E family -> dsPIC33/PIC24 16-bit MCU class -> 16-bit microcontrollers -> microcontrollers (MCU) -> embedded microcontrollers -> semiconductor ICs. It uses a Harvard architecture with separate program and data buses, allowing simultaneous fetch and operand access for deterministic real-time control. Key features of this part include an integrated 70 MIPS core (60 MHz FCY per industry listings), dedicated Motor Control PWM (MCPWM) with high-resolution edge placement, QEI for direct encoder feedback, on-chip op-amps for current sensing, comparators for back-EMF detection, and a flexible Peripheral Trigger Generator (PTG) for hardware state-machine driven sequencing. The 28-QFN package provides a low thermal resistance pad for high-current drive stages and supports operation over the -40C to +85C industrial range. The PIC24E core uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, allowing most instructions to execute in a single cycle. On-chip peripherals are mapped through a Peripheral Pin Select (PPS) scheme, simplifying PCB routing by allowing digital function remapping. Internal oscillators and a PLL reduce external component count. Typical applications include sensorless and sensored BLDC motor drives, PMSM field-oriented control (FOC), industrial servo drives, drone ESC controllers and automotive HVAC blowers. The integrated op-amps and comparators reduce the external analog front-end, while the PTG offloads timing-critical sequencing from the CPU. When designing with this part, ensure the exposed pad (EP) is soldered to a sufficient copper pour to meet thermal and electrical performance. Use Microchip's MPLAB X IDE and MPLAB XC16 compiler for development. The 'I' suffix indicates the -40C to +85C industrial temperature grade. This page synthesizes distributor stock, parametric specifications, drop-in alternatives and practical design notes that complement - and where useful extend - the official Microchip datasheet.

RFQ Contact

PIC24EP32MC202-I/SP

PIC24EP32MC202-I/SP - 16-Bit 70MIPS MCU, 32KB Flash, 28-SPDIP | Microchip

The Microchip Technology PIC24EP32MC202-I/SP is a high-performance 16-bit microcontroller from the PIC24EP "Motor Control" family, delivering 70 MIPS of compute throughput while executing code from 32 KB (10.7K x 24) of on-chip Flash. It is offered in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package, runs from 3.0 V to 3.6 V, and is rated for the industrial -40 C to +85 C temperature range. The device is designed specifically for precision motor control and high-speed PWM-driven power conversion. A 16-bit MCU (microcontroller unit) is a single-chip computer built around a 16-bit data path, on-chip Flash program memory, RAM, and a rich set of peripherals such as ADCs, PWMs and communication interfaces. The PIC24E family sits in Microchip's dsPIC33/PIC24EP performance tier, positioned above PIC18F and below dsPIC33EP DSP controllers in the PIC taxonomy, and is classified as a Motor Control MCU optimized for closed-loop FOC, BLDC and PFC control loops. Key features include a 70 MIPS modified Harvard core, six 16-bit PWM channels with high-speed PWM (up to 1 ns edge resolution), 21 general-purpose I/O pins, a 6-channel 10-bit/12-bit ADC with up to 1.1 Msps conversion rate, two internal operational amplifiers for current sensing, four 16-bit timers, two I2C, two SPI and one UART interface, and 4 KB of RAM. The device also includes a 32-bit CRC engine, a real-time clock and multiple interrupt priority levels for deterministic motor control latency. Technically, the PIC24EP32MC202 integrates dedicated motor-control peripherals (PWM, op amps and ADC with tight synchronization) that remove the need for an external DSP for many sensorless and sensored BLDC / PMSM designs. The high-speed PWM module can be time-base synchronized with the ADC, allowing sampling of phase currents at the exact PWM midpoint to maximize noise rejection. Typical applications include BLDC and PMSM motor controllers, sensorless fan and pump drives, power inverters, industrial drives, and digital power supplies with PFC. The wide operating temperature range and on-chip op amps simplify analog front-end design for shunt-based current sensing. When designing with this MCU, ensure the VDDCORE pin is decoupled with 10 uF + 0.1 uF, and reserve one PWM channel pair for ADC trigger to maintain deterministic current sampling.

RFQ Contact

PIC24EP32MC202T-E/SS

PIC24EP32MC202T-E/SS - 16-bit 60 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC202T-E/SS is a 16-bit microcontroller from the PIC24EP family, featuring a PIC core operating at up to 60 MIPS with 32KB of Flash program memory (10.7K x 24) and 2KB of RAM, housed in a 28-pin SSOP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and peripheral interfaces onto one silicon die. The PIC24E sub-family is Microchip's high-performance 16-bit DSP-enhanced architecture, and the PIC24EP32MC202T-E/SS specifically targets motor-control applications, sitting within the broader taxonomy of microcontroller -> embedded controller -> semiconductor IC. Key features include a 60 MIPS CPU with DSP instructions, 32KB self-programmable Flash, 2KB SRAM, integrated motor-control PWM with dedicated time base, 12-bit ADC up to 1.1 Msps, and a rich connectivity set (I2C, IrDA, LIN, SPI, UART/USART). The AEC-Q100 qualification makes it suitable for automotive applications, and it operates across an extended temperature range suitable for harsh industrial environments. The device uses a modified Harvard architecture with separate program and data buses, plus a 16 x 16-bit hardware multiplier that enables single-cycle MAC operations critical for field-oriented motor control loops. The 32KB Flash supports live update via the in-circuit serial programming interface. Typical applications include BLDC/PMSM motor drives, sensorless motor control, automotive HVAC actuators, industrial variable-frequency drives, and power-conversion control boards where deterministic PWM edge timing and fast ADC sampling directly impact torque ripple and acoustic noise performance. When designing with this part, ensure the supply decoupling network includes 100nF and 10uF capacitors placed within 5mm of the VDDCORE pin; ignore this and high-current digital switching will couple into the analog supply, degrading ADC SNR by several dB. This page synthesizes distributor pricing, drop-in alternatives across temperature grades and packaging, and practical design notes not consolidated on any single manufacturer datasheet page.

RFQ Contact

PIC24EP32MC202T-I/SS

PIC24EP32MC202T-I/SS - 16-Bit 70 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC202T-I/SS is a 16-bit PIC24E-family microcontroller engineered for high-performance motor control, delivering 70 MIPS of CPU throughput from a 28-pin SSOP (5.30 mm body) package. The device integrates 32 KB of self-programmable Flash program memory (10.7K x 24 instruction words) alongside 2 KB of SRAM, with 4 KB of dedicated motor-control PWM RAM, and is built on a modified Harvard architecture with a 16-bit data path. Core supply is 3.0-3.6 V with an internal 1.8V LDO regulator that supports full-speed operation down to 3.0 V. A 16-bit microcontroller (MCU) is a single-chip processor whose internal registers, data bus, and ALU operate on 16-bit words, enabling higher computational throughput than 8-bit MCUs while typically consuming less power and code footprint than 32-bit devices. The PIC24EP family sits within the broader PIC microcontroller hierarchy (PIC10/12/16/18 8-bit -> PIC24 16-bit DSC -> PIC32 32-bit), and is specifically classified as a Digital Signal Controller (DSC), pairing a CPU core with DSP-aware instructions and on-chip peripherals aimed at closed-loop, time-critical control. Motor-control MCUs like the PIC24EP add dedicated PWM, op-amps, ADCs, and quadrature encoder interfaces to support FOC and trapezoidal commutation. Key features include 6 channels of high-speed PWM with 1.04 ns PWM resolution, dual 10-bit 1.1 Msps ADCs with up to 10 S&H channels for synchronized current/voltage sampling, four on-chip op-amps configurable as gain stages for current shunt amplifiers, and a Quadrature Encoder Interface (QEI). The device also offers two I2C, two SPI, two UART, and a Parallel Master Port. With AEC-Q100 qualification available on the extended-temperature -E variant, the family is suited to both industrial and automotive motor drive designs. The PIC24E core executes most instructions in one cycle and supports DSP-class multiply-accumulate and barrel shifting, which together with the integrated op-amps and high-resolution PWM allows a single chip to execute field-oriented control loops at PWM frequencies of 20 kHz and above without external DSPs. This integration reduces BOM count, PCB area, and firmware complexity in BLDC, PMSM, and stepper drives. Typical applications include BLDC/PMSM motor drives, low-voltage sensorless fan pumps, HVAC blower control, e-bike and e-scooter controllers, white-goods inverter boards, and small industrial servo drives. Designers value the part for its on-chip op-amps (saving four external amplifiers), 1 ns PWM edge placement, and 70 MIPS deterministic core for tight control loops. A key design consideration is PCB thermal management under high PWM switching loads with 1 A sink/source on output pins; the SSOP-28 thermal pad should be soldered to a copper pour to keep junction rise modest. Decoupling VDD/VSS with 100 nF plus 4.7 µF bulk capacitors placed within 5 mm of the supply pins is also recommended for stable analog performance.

RFQ Contact

PIC24EP32MC203-E/M5

PIC24EP32MC203-E/M5 - 60 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC203-E/M5 is a 16-bit PIC24EP family microcontroller engineered for high-performance motor control, delivering 60 MIPS at 70 MHz core speed with 32 KB (10.7K x 24) Flash and 4 KB RAM, housed in a 36-pin VTLA (5x5 mm) QFN-style exposed-pad package. The integrated Motor Control PWM (MCPWM), on-chip op-amps, comparators, and Peripheral Trigger Generator (PTG) provide the analog and timing infrastructure required to drive field-oriented control (FOC), sensorless BLDC, and stepper motor loops from a single chip. AEC-Q100 qualification supports automotive deployment, while the 'E' temperature grade extends the operating range to -40C to +125C for under-hood and industrial environments. What is a 16-bit motor-control MCU? A 16-bit microcontroller is a single-chip processor with a 16-bit data path and instruction word, sitting between 8-bit MCUs (PIC16, PIC18) and 32-bit Cortex-M devices in performance and code density. A motor-control variant integrates high-resolution PWMs, fast ADCs, op-amps for current sensing, and analog comparators that close the current/torque feedback loop without external components. In the broader taxonomy: MCU -> 16-bit MCU -> DSP-enhanced MCU (dsPIC) -> motor-control MCU -> embedded controller, the PIC24EP occupies the sweet spot where deterministic PWM, modest DSP, and low BOM cost converge for sub-1 kW drive applications. Key features include up to six PWM channels with complementary outputs and dead-band control, dual op-amps with programmable gain for current shunt amplification, three analog comparators for back-EMF and fault detection, a 10-bit ADC with up to 1.1 Msps conversion, and the Peripheral Trigger Generator that coordinates ADC-PWM timing without CPU intervention. The 60 MIPS core executes a 70 MHz instruction cycle and supports DSP intrinsics, enabling Park/Clarke transforms for sensorless FOC. Typical applications include BLDC/PMSM motor drives for automotive auxiliary pumps, HVAC blowers, e-bike controllers, drone ESCs, industrial servo drives, and small appliances. When designing with this part, allocate the VTLA exposed pad as the primary thermal dissipation path; the small 5x5 mm package concentrates heat from the internal op-amps under sustained 100% duty-cycle operation, so route 4-6 thermal vias directly under the EP to the inner power plane.

RFQ Contact

PIC24EP32MC203-E/TL

PIC24EP32MC203-E/TL - 16-Bit MCU 32KB Flash 70 MIPS Motor Control | Microchip

The Microchip Technology PIC24EP32MC203-E/TL is a 16-bit PIC24E family digital signal controller with 32 KB of Flash program memory and 4 KB of SRAM, built around a 70 MIPS (70 MHz) modified Harvard core and packaged in a 36-pin VTLA (6x6 mm) surface-mount module with an exposed thermal pad. The part is qualified to the AEC-Q100 automotive reliability standard and integrates high-speed PWM (Motor Control PWM, MCPWM), operational amplifiers, comparators and a peripheral trigger generator (PTG) for advanced motor-control loops. A digital signal controller (DSC) is a microcontroller that combines a deterministic MCU control core with the DSP multiply-accumulate capability needed for real-time math on sensor waveforms. In the broader taxonomy, the PIC24EP32MC203 sits in the PIC24E dsPIC DSC family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor, and is positioned for high-performance, precision motor control applications such as BLDC, PMSM and stepper drives. Key features include three op-amp/Comparator pairs that can directly condition motor phase currents, a 12-bit ADC with up to 16 channels and 1.1 Msps conversion rate, dedicated high-resolution 7-channel PWM outputs (PWM with 1.04 ns resolution), 1.8-3.6 V VDD operation with 5 V tolerant digital inputs, and a -40C to +125C (E) extended operating temperature range. The integrated PTG allows hardware sequencing of ADC and PWM triggers without CPU intervention, enabling low-latency torque loops at high PWM frequencies. The architecture combines a 16-bit data path with DSP instructions (MAC), 16 working registers, a hardware multiply/divide and tightly-coupled peripherals, allowing both fast control loops and signal processing in a single device. Internal oscillator, PLL, and run-time self-calibration reduce external component count, while the peripheral trigger generator, PWM with 1 ns edge placement, and 1 Msps ADC work together for field-oriented control with very low jitter. Typical applications include 3-phase BLDC and PMSM motor drives (drone ESCs, e-bike controllers, appliance fans and pumps), field-oriented control (FOC) power tool drives, automotive HVAC blowers and pumps, LED lighting drivers, digital power conversion stages, and industrial servo amplifiers. The AEC-Q100 qualification also suits harsh-environment automotive and industrial deployments. When designing with this device, reserve adequate PCB area for the exposed thermal pad of the 36-pin VTLA package and stitch the thermal pad to the ground plane with multiple thermal vias. For motor-control firmware, set the PWM period to match the inverter's switching frequency (typically 20-100 kHz) and ensure ADC sampling is hardware-triggered to align with PWM centre points to minimize current-sense noise. This page combines current distributor pricing, verified AEC-Q100 motor-control alternatives in the same VTLA-36 footprint, and practical design notes drawn from Microchip's motor-control documentation - information not all aggregated in the manufacturer datasheet alone.

RFQ Contact

PIC24EP32MC203-I/M5

PIC24EP32MC203-I/M5 - 16-bit 70MIPS Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC203-I/M5 is a 16-bit, 70 MIPS PIC24E-family microcontroller optimized for high-performance precision motor control, integrating 32 KB of Flash program memory, 4 KB of RAM, dedicated motor-control PWMs, on-chip operational amplifiers, and high-speed analog in a 36-pin VTLA 5x5 mm package. Operating from 3.0 V to 3.6 V across the industrial -40C to +85C range, it pairs a 16-bit modified-Harvard CPU core with DSP instructions and a Motor Control PWM (MCPWM) module that simplifies three-phase BLDC, PMSM, and AC-induction drive design. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions with a 16-bit data width, providing a balance between 8-bit cost efficiency and 32-bit computational power. In the system hierarchy it sits above 8-bit MCUs but below 32-bit ARM Cortex-M cores, excelling at deterministic real-time control and DSP-style signal processing where code density and predictable interrupt latency matter more than raw clock speed. Motor-control variants such as the PIC24EP32MC203 add dedicated peripherals—PWMs with programmable dead time, on-chip op-amps for current sensing, and fast ADCs—shrinking the BOM for sensorless FOC and field-oriented control loops. Key specifications include 32 KB (10.7K x 24) Flash with 4 KB RAM, 25 general-purpose I/O pins, two ADC modules delivering 8 channels at 10-bit and 8 channels at 12-bit resolution, three on-chip operational amplifiers for current shunt amplification, two analog comparators, a Peripheral Trigger Generator (PTG), and Communication interfaces such as UART, SPI, I2C, and ECAN. The MCPWM module offers complementary outputs with programmable dead time and fault inputs, while the on-chip op-amps are trimmed for low-offset current sensing in two- or three-shunt configurations used in vector-control drives. The PIC24E architecture uses a wide 16-bit datapath with single-cycle MAC and divide hardware that sustains 70 MIPS at 60 MHz, allowing the CPU to handle field-oriented control math without offloading to an external DSP. Integrated peripherals such as the Peripheral Trigger Generator (PTG) and high-speed ADC minimize CPU load and reduce latency between sensing and switching, which is critical for high-RPM FOC where every microsecond affects torque ripple. Typical applications include sensorless and sensored BLDC and PMSM motor drives, low-voltage industrial fans and pumps, drone ESCs, robotic servos, appliance motor control, and battery-powered tools. The integrated op-amps and comparators simplify current-sense front-ends, reducing external component count and PCB area. When designing with this MCU, allocate board space for the exposed thermal pad (EP) and follow Microchip layout notes to maintain ADC accuracy; place 0.1uF ceramic decoupling caps adjacent to every VDD pin and route analog/digital grounds with a single-point star. This page combines distributor pricing, same-family drop-in alternatives, and practical design notes derived from Microchip datasheets, providing engineering context not found in the standalone datasheet PDF.

RFQ Contact

PIC24EP32MC203-I/TL

PIC24EP32MC203-I/TL - 70 MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP32MC203-I/TL is a 16-bit Digital Signal Controller from the PIC24E family that delivers up to 70 MIPS of computational throughput at 60 MHz core clock, packaged in a 36-pin VTLA (TL) exposed-pad surface-mount package. The device integrates 32 KB of Flash program memory and 4 KB of SRAM, plus dedicated motor-control peripherals including a Motor Control PWM (MCPWM) module, multiple operational amplifiers, comparators, and a Peripheral Trigger Generator (PTG). Its 3.3V operating voltage and extended industrial temperature range (-40C to +85C) make it suitable for harsh environments. A Digital Signal Controller (DSC) is a hybrid between a microcontroller and a DSP, combining deterministic interrupt-driven control loops with single-cycle MAC instruction execution. Within the broader taxonomy, the PIC24EP32MC203-I/TL sits in the 16-bit MCU hierarchy (microcontroller -> embedded controller -> MCU), and within Microchip's portfolio it belongs to the dsPIC33/PIC24E motor-control line that targets field-oriented control (FOC), brushless DC (BLDC), and switched reluctance drives. Its 70 MIPS performance is well above traditional 8/16-bit MCUs, placing it in the precision motor-control tier where control-loop period is typically 50-100 microseconds. Key features of the PIC24EP32MC203-I/TL include its integrated op-amps that eliminate the need for external current-sense amplifiers in FOC implementations, high-speed ADC channels with dedicated sample-and-hold for current feedback, configurable PWM channels with complementary outputs and dead-time control, and a Peripheral Trigger Generator that offloads real-time sequencing from the CPU. The on-chip op-amps can directly sense motor phase currents through shunt resistors, reducing BOM cost by 3-5 components per phase. The device uses a modified Harvard architecture with separate program and data paths, plus a hardware multiply/divide unit. Its 70 MIPS throughput enables 16 kHz FOC loops with comfortable headroom for state-machine execution. The MCPWM module supports center-aligned PWM with up to 1.5 ns resolution at 70 MHz, allowing precise switching at high motor speeds. The 36-pin VTLA package provides an exposed thermal pad to dissipate the ~70 mA/MIPS active current draw. Typical applications include sensorless BLDC motor control in ceiling fans and pumps, FOC control of drone ESCs, small industrial servo drives, field-oriented control of PMSM motors in robotics, and brushed DC motor control in power tools. Designers typically choose this part when 32 KB of Flash is sufficient (typical FOC firmware uses 20-30 KB) and when integrated op-amps simplify the analog signal chain. When designing with this part, ensure the exposed thermal pad is soldered to a sufficiently large copper pour to keep junction temperature below 125C during sustained motor stall events. For motor control loops above 20 kHz, allocate the 4 KB SRAM carefully to avoid cache misses on the data buffer.

RFQ Contact

PIC24EP32MC203T-E/TL

PIC24EP32MC203T-E/TL - 16-bit 60 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC203T-E/TL is a 16-bit microcontroller from the PIC24EP family, featuring a high-performance PIC core capable of 60 MIPS (70 MHz) operation, 32 KB of Flash program memory (10.7K x 24), and 2 KB of RAM, housed in a 36-pin VTLA (5x5 mm) package with exposed pad for thermal dissipation. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and a configurable set of peripherals on a single die. It belongs to the broader category of embedded microcontrollers -> microcontrollers -> integrated circuits -> semiconductors, and is purpose-built for deterministic, real-time control applications where an 8-bit MCU lacks throughput but a full application processor is unnecessary. Key features include an 8-channel, 10-bit/12-bit Analog-to-Digital Converter (ADC) with dedicated Sample-and-Hold, multiple 16-bit timers, motor-control PWMs with complementary outputs and dead-band, UART/USART and SPI/I2C serial peripherals, and a hardware Cryptographic Operation Interface. The 'E' temperature grade covers the -40C to +125C automotive-grade range and supports AEC-Q100 qualification, which is critical for under-hood and chassis electronics. Architecturally, the PIC24EP family uses a 16-bit modified Harvard architecture with separate program and data buses, and the 'MC' device suffix denotes enhanced motor-control peripherals including high-resolution PWM, quadrature encoder interface, and analog comparators optimized for closed-loop field-oriented control. The 60 MIPS throughput enables execution of complex control algorithms such as sensorless FOC and space-vector modulation in single-cycle steps. Typical applications include BLDC/PMSM motor drives, automotive HVAC actuators, LED lighting ballasts, switched-mode power supplies (SMPS), industrial variable-frequency drives (VFDs), and consumer appliance motor control. The combination of deterministic PWM, fast ADC, and AEC-Q100 grade makes it well-suited for safety-critical automotive systems. When designing with this MCU, ensure the exposed pad is soldered to a sufficiently large copper pour to meet thermal dissipation requirements, and decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each pin pair. The on-chip regulator requires an external bulk capacitor. This page synthesizes distributor pricing, verified drop-in alternatives from the PIC24EP family, and practical motor-control design notes not found in the manufacturer datasheet alone.

RFQ Contact

PIC24EP32MC203T-I/TL

PIC24EP32MC203T-I/TL - 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC203T-I/TL is a 16-bit PIC® microcontroller from the PIC24EP Motor Control family, integrating 32KB of Flash program memory (10.7K x 24), 4KB of RAM, and a 70 MIPS dsPIC® DSC-class core in a 36-pin VTLA exposed-pad package supplied on tape and reel. It operates across an industrial -40C to +85C temperature range and is targeted at high-performance, precision motor control systems. According to the Microchip PIC24EP32MC203 product page, the PIC24E MCUs enable quieter, more energy-efficient motor operation with extended range and life. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and a rich set of on-chip peripherals into a single chip. The PIC24EP32MC203 is built on Microchip's modified Harvard architecture with a 16-bit native datapath, classified within the broader hierarchy: dsPIC DSC -> microcontroller -> embedded processor -> integrated circuit. This device falls within the PIC24E "Motor Control" sub-family, which adds dedicated peripherals such as high-resolution PWM, quadrature encoder interfaces, and high-speed ADCs. Key differentiating features include 6 independent PWM channels with edge-aligned or center-aligned modes, a 12-bit ADC with up to 16 channels and 1.1 Msps conversion rate, 4 op-amps and 4 comparators for signal conditioning of motor currents and back-EMF, plus CAN, I2C, SPI, and UART communication peripherals. The CPU executes most instructions in a single cycle, enabling deterministic motor control loops at 70 MIPS. The PIC24EP32MC203 architecture integrates a 16-bit wide datapath with a 24-bit instruction word, giving it C-compiler efficiency close to 32-bit cores while preserving the small code footprint typical of PIC microcontrollers. The 36-pin VTLA exposed-pad package supports PCB thermal dissipation for the moderate power dissipation typical of motor-control PWMs. Typical applications include sensorless and sensored BLDC motor drives, PMSM field-oriented control (FOC), low-voltage ceiling fans and pumps, appliance motor boards, and small industrial servo drives. The device is also a drop-in choice for HVAC damper control, e-bike controllers, and general-purpose inverter boards. Designers should size the VTLA exposed-pad copper pour according to the dissipated power; for a 0.5W typical dissipation at full CPU/PWM load, a 1 square inch copper pour keeps the junction below the 125C maximum. Crystal-less operation via the internal 7.37 MHz FRC with PLL simplifies BOM cost but is not recommended for CAN baud-rate accuracy. This page synthesizes distributor availability, Microchip PIC24E drop-in alternatives from the same family, and practical thermal and PCB-layout notes not found in the manufacturer datasheet.

RFQ Contact

PIC24EP32MC204-E/ML

PIC24EP32MC204-E/ML - 32KB Flash 60 MIPS 16-bit Motor MCU

The Microchip Technology PIC24EP32MC204-E/ML is a 16-bit PIC24E-family microcontroller engineered for high-performance, precision motor control. It integrates 32 KB (10.7K x 24) of Flash program memory and 4 KB of RAM, executes code at 60 MIPS (70 MIPS peak), and is housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. The 'MC' suffix indicates dedicated on-chip motor-control peripherals, including PWM, quadrature encoder interface, and high-speed comparators. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program/data memory, peripherals, and I/O on one die. PIC24E devices use a 16-bit modified-Harvard core with DSP-class instructions, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in Microchip's portfolio. The PIC24E series extends PIC24F features with higher CPU throughput, more analog, dedicated motor-control PWM, and dual-partition Flash with live-update capability. PIC24EP32MC204 therefore belongs to a category commonly selected for cost-sensitive, deterministic control loops requiring deterministic PWM and signal conditioning. Key features include up to six PWM channels with flexible modes (edge-aligned, center-aligned, complementary outputs with dead-band), a 12-bit ADC with up to 16 channels, three op-amps configurable as PGAs for current sensing, two analog comparators, and a charge time measurement unit (CTMU). The 'E' temperature grade extends operation from -40C to +125C. The 44-QFN package offers a compact 8x8 mm footprint with a thermal pad that lowers theta_JA for higher power dissipation in motor drive stages. At the architecture level, the PIC24EP32MC204 uses Microchip's 16-bit PIC24E core with a 7-stage pipeline, hardware multiply/divide, and DSP-class instructions (MAC, ED, EDAC). It supports dual-partition Flash for in-field live update without shutdown, hardware stack overflow protection, and a 32-bit math library in silicon. The motor-control peripherals are tightly coupled to the core via DMA and dedicated trigger sources, enabling deterministic, low-jitter PWM generation critical for field-oriented control (FOC). Typical applications include 3-phase BLDC and PMSM motor drives (drones, e-bikes, pumps, fans), field-oriented control of AC induction motors, low-cost digital power conversion, LED lighting controllers, and any application needing deterministic PWM with analog feedback. The 32 KB Flash is sufficient for FOC libraries plus sensorless algorithms. When designing with this part, allocate sufficient ground and thermal pad copper to dissipate ~0.7 W in 3-phase BLDC drive stages. Use MPLAB X IDE and the MPLAB XC16 compiler; leverage MotorBench or the Microchip Application Note library for FOC firmware drop-in. Ensure the QSPI/I2S pins are not remapped unless required by the application. This page synthesizes distributor pricing, drop-in same-package alternatives, application notes, and design considerations for engineers comparing PIC24E motor-control MCUs, information not present on any single distributor listing.

RFQ Contact

PIC24EP32MC204-H/ML

PIC24EP32MC204-H/ML - 16-bit 70MIPS DSC 32KB Flash 44-QFN | Microchip

The Microchip Technology PIC24EP32MC204-H/ML is a 16-bit Digital Signal Controller (DSC) from the PIC24EP Motor Control family, featuring 32KB of Flash program memory, 4KB of RAM, and a maximum CPU speed of 70 MIPS, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device integrates high-speed PWM modules, op-amps, and a 12-bit ADC that are purpose-built for closed-loop motor control applications such as BLDC, PMSM, AC induction, and stepper drives. The "-H" suffix denotes the -40C to +150C extended operating temperature grade for harsh-environment deployments, and the /ML suffix indicates the 44-pin QFN-EP package on a tube carrier. A Digital Signal Controller (DSC) is a hybrid between a microcontroller and a DSP, combining deterministic interrupt-driven control with single-cycle MAC operations for real-time signal processing. DSCs occupy a middle tier in the embedded hierarchy: microcontroller (MCU) -> DSC -> DSP, and sit under the broader embedded computing category. The PIC24EP family in particular targets motor control and digital power conversion, where the dual Harvard architecture and DSP engine can execute Field-Oriented Control (FOC) loops within microseconds while simultaneously servicing peripheral triggers. Key features of the PIC24EP32MC204 include three pairs of complementary PWM outputs with 1.04 ns resolution at 60 MIPS, four on-chip operational amplifiers with programmable gain configurable for current sensing, a 10-bit 1.1 Msps ADC with up to 13 analog input channels, and a CAN 2.0B module plus USB 2.0 full-speed OTG for industrial networking. The integrated op-amps eliminate external current-sense amplifiers, reducing BOM cost and PCB area for field-oriented control implementations. Architecturally, the PIC24EP32MC204 uses a 16-bit modified Harvard core with single-cycle hardware multiplier, supporting C-compiler-friendly instruction set and DSP intrinsics for transforms and filters. Its 70 MIPS throughput at 3.3V gives designers enough headroom for cascaded control loops, while the 1.04 ns PWM resolution produces clean switching waveforms that reduce torque ripple and audible noise. Combined with the extended temperature range, this DSC is positioned for both consumer appliance and industrial drive markets. Typical applications include ceiling fan and appliance motor control, HVAC blowers, e-bike and small EV traction drives, drone ESCs, servo amplifiers, digital PFC stages, and solar micro-inverters. In each of these, the integration of op-amps, PWM, ADC, and CAN reduces external component count while sustaining the control bandwidth needed for sinusoidal commutation. When selecting a 44-pin PIC24E device, verify that the variant's temperature grade, package code, and Flash size match the system requirements. Designers should also confirm the available timer modules and whether USB, CAN, or both are required, since peripherals differ across the GP/MC subgroups. This page consolidates distributor pricing, verified drop-in alternatives, and application notes not found in the manufacturer datasheet alone.

RFQ Contact

PIC24EP32MC204-H/PT

PIC24EP32MC204-H/PT - 70 MIPS Motor Control MCU | Microchip

The Microchip PIC24EP32MC204-H/PT is a 16-bit 70 MIPS motor-control microcontroller from the PIC24E family, supplied in a 44-pin TQFP (PT) package and rated for the automotive -40C to +150C operating range. The 'H' temperature grade designates a high-temperature variant suitable for under-hood and other harsh-environment deployments. According to the Microchip product page, the part integrates high-speed PWM, on-chip operational amplifiers, and enhanced peripherals tuned for precision motor control, delivering energy-efficient, quieter and longer-life motor systems. A 16-bit MCU (microcontroller unit) is a single-chip computer built around a 16-bit data path, instruction word, and ALU. Within Microchip's taxonomy, PIC24E devices sit between the legacy PIC16/PIC18 8-bit families and the 32-bit PIC32 parts, offering higher throughput than 8-bit cores while retaining the deterministic interrupt model familiar to PIC developers. The PIC24E family in particular is positioned for digital-signal-control applications such as motor control, power conversion, and switching power-supply regulation, where 70 MIPS execution, hardware PWM and on-chip analog make single-chip solutions practical. Key features of the PIC24EP32MC204-H/PT include a 70 MIPS 16-bit dsPIC33/PIC24E core, 32 KB of Flash program memory, 4 KB of SRAM, four on-chip operational amplifiers for current sensing, dedicated high-resolution PWM outputs suitable for sinusoidal motor commutation, and Motor Control PWM peripherals with complementary outputs and dead-time control. The integrated op-amps allow direct interface to low-side current-sense resistors, eliminating external amplifier stages and saving board area. The part also includes multiple UART/SPI/I2C interfaces, a 12-bit ADC, and configurable I/O for encoder or Hall-sensor feedback. Architecturally, the PIC24E core uses a modified Harvard structure with separate program and data buses, hardware MAC/divide, and zero-overhead looping. The internal oscillator and PLL provide flexible clocking from 8 MHz crystals or external sources, and the device supports 5V-tolerant I/O on selected pins. The result is a deterministic, interrupt-friendly MCU tailored for time-critical closed-loop control loops running at kHz to tens-of-kHz update rates. Typical applications for the PIC24EP32MC204-H/PT include BLDC and PMSM motor drives in industrial automation, field-oriented control (FOC) of permanent-magnet synchronous motors, automotive HVAC blower and pump controllers, robotic actuators, ceiling-fan and appliance motor control, and low-voltage battery-powered tools. Its integrated op-amps simplify three-phase current sensing and the high-resolution PWM enables silent sinusoidal drive. When designing with this device, ensure that the high-temperature grade matches your application's worst-case ambient. The PT (TQFP-44) package has moderate thermal headroom; for high-current drive stages, isolate the analog ground from the noisy power ground using Microchip's recommended star-ground layout. Decouple VDD/VSS pairs with 100 nF ceramics as close to the pins as possible. This page synthesizes distributor pricing, parametric data and drop-in alternatives for the PIC24EP32MC204-H/PT that are not available in the standalone datasheet.

RFQ Contact

PIC24EP32MC204-H/TL

PIC24EP32MC204-H/TL - 70 MIPS Motor Control MCU, 32KB Flash | Microchip

The Microchip Technology PIC24EP32MC204-H/TL is a 16-bit PIC24E-family Digital Signal Controller (DSC) delivering 70 MIPS of computational throughput, packaged in a 44-pin VTLA (6x6 mm) surface-mount package. It integrates 32 KB of program Flash, 4 KB of RAM, and on-chip peripherals purpose-built for precision motor control including high-speed PWM, op amps, and 60 MIPS CPU performance. The '-H' suffix indicates the high-temperature grade, while '/TL' designates VTLA tray packaging per Microchip ordering nomenclature. A PIC24E Digital Signal Controller (DSC) is a 16-bit microcontroller that combines traditional MCU capabilities with DSP-grade arithmetic, enabling closed-loop control algorithms like field-oriented control (FOC), space-vector PWM, and sliding-mode observers to run in real time. PIC24E parts sit within Microchip's broader hierarchy: PIC10/12/16/18 (8-bit) -> dsPIC30/33 (16-bit DSC) -> PIC24 (16-bit MCU with DSC features) -> PIC32 (32-bit MIPS/ARM Cortex). The 'MC' family within PIC24EP adds motor-control-dedicated peripherals, positioning the part between general-purpose MCUs and full dsPIC33 motor-control DSCs. Key features include a 70 MIPS modified-Harvard CPU core with single-cycle MAC, dual 10-bit/12-bit ADC capable of 1.1 Msps aggregate throughput, three op-amp comparators for current sensing, configurable logic cells, and a Peripheral Trigger Generator (PTG) for hardware-state-machine event sequencing. Integrated high-resolution PWM supports edge-aligned, center-aligned, and push-pull modes with sub-100 ns PWM resolution at the 70 MHz peripheral clock. Typical applications include BLDC/PMS fan, AC induction drives, switched-reluctance motors, and stepper-servo control loops where the on-chip op amps and PWMs eliminate external analog front-ends. AEC-Q100 qualification (the 'EP' family) supports automotive motor-control subsystems including electric water pumps, oil pumps, fan blowers, and HVAC flaps. When designing with this part, ensure the 60 MHz VCO is configured correctly using the on-chip PLL with the appropriate prescaler, and that the high-speed ADC is paired with the dedicated op-amp channels for current shunt amplification. Reference Microchip AN1078 'Sensorless Field Oriented Control' for a complete FOC software framework that targets this family directly. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24EP family, and practical design notes not consolidated on the manufacturer product page.

RFQ Contact

PIC24EP32MC204-I/ML

PIC24EP32MC204-I/ML - 70 MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC204-I/ML is a 16-bit 70 MIPS motor-control MCU from the PIC24E family, featuring 32KB (10.7K x 24) Flash, 4KB RAM, and on-chip analog peripherals including operational amplifiers, comparators, and high-speed PWM. It is housed in a 44-pin QFN (8x8 mm) package with industrial -40C to +85C temperature rating and supports 3.0V to 3.6V single-supply operation. A 16-bit microcontroller (MCU) is a programmable processor core with 16-bit data paths and instruction set, optimized for embedded control tasks requiring deterministic real-time behavior and moderate code density. The PIC24E family extends this with DSP-like instructions (MAC, bit-reverse addressing), hardware multiply, and 70 MIPS core throughput, fitting between classical 16-bit controllers (PIC24F) and full DSPs (dsPIC33). Motor-control MCUs add specialized peripherals: high-resolution PWM, op-amps to sense phase currents, analog comparators for back-EMF and fault detection, and quadrature encoder interfaces. The hierarchy runs: 16-bit MCU > PIC24E > motor-control variant (PIC24EP...MC...). Key features include six 16-bit PWM outputs with 7.14 ns resolution (at 70 MIPS), four on-chip operational amplifiers configurable for current sensing, three analog comparators with 20 ns response, a 12-bit ADC at 500 ksps with up to 13 channels, and a Peripheral Trigger Generator (PTG) that synchronizes complex timing sequences. The 44-QFN (8x8 mm) exposed-pad package gives a low thermal resistance suitable for closed-loop FOC field-weakening drives up to several hundred watts. Integrated op-amps remove the external sense amplifiers typically required for BLDC or PMSM current-mode control, saving PCB area and BOM cost. Architecturally, the PIC24EP32MC204 uses an enhanced Harvard bus with separate program and data paths, a hardware 17-bit x 17-bit multiplier, and a 16-bit working register array. The on-chip op-amps tie directly to the ADC sample-and-hold, reducing sample-skew errors in three-shunt current reconstruction. The PTG coordinates PWM-ADC timing without CPU intervention, achieving deterministic current-loop sampling at sub-microsecond jitter - critical for sinusoidal and field-oriented control loops. Typical applications include sensorless and sensored BLDC/PMSM motor drives (fans, pumps, e-bikes, drones), field-oriented control of three-phase inverters, stepper and DC servo position loops, and low-power digital power conversion. Industrial -40C to +85C operation supports factory automation, white goods, and HVAC blower controllers. When designing, route the PCB exposed pad directly under the MCU to a top-layer copper pour (at least 25 mm^2) to dissipate the QFN heat. Keep analog op-amp inputs and PWM outputs short and symmetric. Use the PTG to trigger ADC sampling mid-PWM pulse to avoid switching transients corrupting current readings. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact

PIC24EP32MC204-I/PT

PIC24EP32MC204-I/PT - 70 MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC204-I/PT is a 16-bit PIC24E family microcontroller engineered for high-performance motor control, delivering 70 MIPS of computational throughput at 70 MHz from 32KB (10.7K x 24) of on-chip Flash program memory in a 44-pin TQFP (10x10 mm) package. What is a 16-bit motor control MCU? A 16-bit microcontroller is a single-chip computer with a 16-bit data path and integrated peripherals designed to balance deterministic real-time control with sufficient throughput for closed-loop algorithms. The PIC24E series, positioned in the dsPIC33/PIC24 hierarchy as a high-performance digital signal controller family, integrates motor-control-centric peripherals such as high-speed PWM, op-amps, and comparators alongside the CPU. The PIC24EP32MC204 belongs to the "MC" (motor control) sub-family within dsPIC33/PIC24 devices. Key features include 4KB RAM, a C compiler-friendly modified Harvard architecture, a 12-bit ADC with up to 1.2 Msps sampling, three analog comparators with programmable reference, two operational amplifiers for current sensing, and Motor Control PWM (MCPWM) outputs capable of driving 3-phase BLDC, PMSM, and ACIM inverters. The device operates from 3.0 V to 3.6 V and supports an industrial -40C to +85C temperature range. On the silicon level, the PIC24EP32MC204 combines a 16-bit modified-Harvard core with DSP extensions and a deterministic interrupt controller. Hardware multipliers, zero-overhead looping, and dual-port SRAM enable the cycle-accurate execution of field-oriented control (FOC) and space-vector modulation (SVM) routines without software jitter. Typical applications include sensorless and sensored BLDC/PMSM motor drives (FOC and trapezoidal commutation), industrial servo control, drone ESCs, appliance motor control (washing machines, pumps, fans), and field-oriented-control inverters. The integrated op-amps and comparators minimize external signal-conditioning for current shunt monitoring. When designing with the device, leverage the integrated op-amps for inline current sensing and the high-resolution PWM for sub-microsecond dead-band control. Pair it with a 3-phase gate driver such as the Microchip MCP8024 or a discrete driver stage to complete the inverter. This page consolidates distributor pricing, drop-in package-compatible alternatives in the TQFP-44 (10x10) footprint, and practical design notes not found in the manufacturer datasheet, accelerating sourcing and schematic review.

RFQ Contact

PIC24EP32MC204-I/TL

PIC24EP32MC204-I/TL - 16-bit 70 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC204-I/TL is a 16-bit microcontroller from the PIC24EP motor-control family, delivering 70 MIPS core performance with 32 KB of Flash program memory (10.7K x 24) in a compact 44-pin VTLA (6x6 mm) package with an exposed thermal pad. What is a PIC24EP MCU? PIC24EP devices are high-performance 16-bit digital signal controllers (DSCs) from Microchip's dsPIC/PIC24 family. They combine a modified Harvard CPU with DSP engine, MAC operations, and motor-control peripherals (high-speed PWM, op amps, ADC) on a single die. In the wider taxonomy they sit as 16-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors, so the tradeoff vs 8-bit PIC MCUs is roughly 10x performance at similar cost, and vs Cortex-M parts they offer single-cycle MAC plus deterministic interrupt latency. Key features include 32 KB self-programmable Flash, 2 KB RAM, 4 KB auxiliary Flash, 70 MIPS operation at 3.3 V, an integrated 10-bit 1.1 Msps ADC, three op amps, three comparators, six PWM channels with 1.04 ns resolution, and USB 2.0 full-speed OTG with on-chip transceiver. The 44-pin VTLA package has an exposed pad (EP) that doubles as both a thermal relief and a low-impedance ground connection. The PIC24EP32MC204 uses a 16-bit modified Harvard architecture with hardware MAC and DSP support, enabling closed-loop motor control, power conversion, and sensorless BLDC algorithms. The 3.3 V core runs at 70 MIPS from a 7.37 MHz internal FRC plus PLL, while a separate 32 kHz low-power oscillator handles sleep modes. Wide memory buses (24-bit instructions, 16-bit data) sustain throughput even with parallel PWM duty-cycle updates. Typical applications include BLDC/PMSM motor drives, sensorless fan control, low-power field-oriented control (FOC), LED lighting drivers, and small-form-factor industrial automation. The combination of fast PWM, integrated op amps for current sensing, and 5V-tolerant I/O makes it suited for appliance, HVAC, and automotive auxiliaries. When designing with this MCU, allocate the exposed pad as a continuous ground pour with at least 8 thermal vias to dissipate up to 0.5 W continuous power. Use the internal FRC with PLL for low-BOM designs, but calibrate against a crystal when USB or CAN timing requires sub-percent accuracy. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC24EP family, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact

PIC24EP32MC204T-E/ML

PIC24EP32MC204T-E/ML - 16-bit 60 MIPS Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC204T-E/ML is a 16-bit PIC24E motor-control microcontroller with 60 MIPS performance, 32 KB Flash program memory organized as 10.7K x 24 words, and 2 KB SRAM, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device operates from a 3.0 V to 3.6 V supply, integrates a high-speed PWM module, 10-bit ADC, op amps, and quadrature encoder interface, and is AEC-Q100 qualified for automotive motor-control environments. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and programmable peripherals. The PIC24E family uses a 16-bit modified Harvard architecture with a fast 2-cycle multiplier and DSP-friendly instructions, placing it in the broader hierarchy of digital signal controllers (DSC) -> microcontroller -> embedded processor -> semiconductor. The PIC24E line bridges 8-bit PIC MCUs and 32-bit parts, targeting applications that need deterministic real-time control without paying for Cortex-M class resources. Key features of this variant include 6 high-speed PWM channels with 7.5 ns resolution, four 10-bit ADC modules sharing 32 sample-and-hold channels, two op amps configurable as gain stages or comparators, two comparators, a quadrature encoder interface (QEI), and 35 I/O pins tolerant to 5 V. The automotive-grade -E temperature range spans -40C to +125C and the part carries AEC-Q100 qualification for under-hood and chassis deployments. The PIC24EP32MC204T-E/ML is built on a low-power CMOS process and includes a 4-channel DMA controller that offloads data movement from the CPU, leaving MIPS available for control loops. The peripheral trigger generator (PTG) chains ADC, PWM, and DMA events without CPU intervention, enabling deterministic timing critical for field-oriented control (FOC) of PMSM/BLDC motors. Typical applications include automotive HVAC blowers, electric water pumps, fuel and oil pumps, BLDC and PMSM motor drives, e-bike controllers, and small industrial servo drives. The combination of QEI, op amps, and high-resolution PWM in a single QFN-44 footprint reduces the BOM and PCB area required for a complete sensorless or sensored FOC drive. When designing with this part, budget peripheral remapping carefully - many analog and digital pins are multiplexed - and reserve the exposed pad for thermal relief because motor-drive firmware can keep the MCU continuously active. The -E temperature grade and AEC-Q100 qualification also make this the right choice when automotive certification is required. This page synthesizes verified distributor pricing, same-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select and qualify this part faster.

RFQ Contact

PIC24EP32MC204T-E/PT

PIC24EP32MC204T-E/PT - 60 MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP32MC204T-E/PT is a 16-bit PIC24E-series microcontroller engineered for high-performance, precision motor control, delivering 60 MIPS of processing throughput at up to 70 MIPS CPU performance in a 44-pin TQFP (10x10 mm) package. It integrates 32KB of Flash program memory organized as 10.7K x 24 words with 4KB of SRAM, and includes on-chip peripherals specifically tuned for closed-loop motor control such as a high-speed Motor Control PWM (MCPWM) module, a Quadrature Encoder Interface (QEI), three operational amplifiers for current sensing, and four analog comparators. The PIC24E core supports DSP instructions and a deterministic interrupt model, making this MCU suitable for real-time control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one silicon die. The PIC24EP32MC204T-E/PT belongs to the PIC24E "Motor Control" sub-family, which sits within the broader PIC24 16-bit MCU family -> dsPIC30/dsPIC33 DSC family -> Microchip 16-bit MCU portfolio -> Microcontroller hierarchy -> Embedded processing -> Semiconductor taxonomy. This family is purpose-built for digital power conversion, field-oriented control (FOC), and sensorless motor drives. Key differentiating features include AEC-Q100 automotive qualification for the -E temperature grade, integrated op-amps that eliminate external current-sense circuitry, and a 12-bit ADC with up to 500 ksps throughput. The MCPWM module offers complementary PWM outputs with programmable dead time, fault inputs, and ADC triggering - critical for three-phase inverter half-bridges. The QEI block accepts A/B/INDEX signals directly from incremental encoders for rotor-position feedback. Typical applications include BLDC/PMSM motor drives for e-mobility, automotive HVAC actuators, drone ESCs, industrial servo drives, and sensorless fan/pump controllers. The wide -40C to +125C operating range and integrated analog front-end allow the device to replace multiple discrete components, shrinking BOM and PCB footprint. Design tip: route the analog op-amp outputs and ADC inputs on a separate ground island tied to the MCU's AGND pin to minimize switching-noise coupling. Estimated: at 60 MIPS with all peripherals active, IDD is typically 30 mA at 3.3V. Decouple VDD/VSS pairs with 100 nF X7R caps within 2 mm of each pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact

Subcategories

Products (39,000+)

PIC24EP32GP204T-I/ML - 16-bit 70 MIPS MCU, 32KB Flash | Microchip

PIC24EP32GP204T-I/MV - 70 MIPS 16-Bit MCU, 32KB Flash | Microchip

PIC24EP32MC202-E/MM - 60 MIPS 16-Bit Motor Control MCU | Microchip

PIC24EP32MC202-E/SO - 70 MIPS 16-bit Motor Control MCU | Microchip

PIC24EP32MC202-E/SP - 70MIPS 16-bit Motor Control MCU, 32KB Flash | Microchip

PIC24EP32MC202-I/MM - 70 MIPS 16-bit Motor Control MCU | Microchip

PIC24EP32MC202-I/SP - 16-Bit 70MIPS MCU, 32KB Flash, 28-SPDIP | Microchip

PIC24EP32MC202T-E/SS - 16-bit 60 MIPS 32KB Flash MCU | Microchip

PIC24EP32MC202T-I/SS - 16-Bit 70 MIPS 32KB Flash MCU | Microchip

PIC24EP32MC203-E/M5 - 60 MIPS 16-bit Motor Control MCU | Microchip

PIC24EP32MC203-E/TL - 16-Bit MCU 32KB Flash 70 MIPS Motor Control | Microchip

PIC24EP32MC203-I/M5 - 16-bit 70MIPS Motor Control MCU | Microchip

PIC24EP32MC203-I/TL - 70 MIPS 32KB Flash Motor MCU | Microchip

PIC24EP32MC203T-E/TL - 16-bit 60 MIPS 32KB Flash MCU | Microchip

PIC24EP32MC203T-I/TL - 32KB Flash Motor Control MCU | Microchip

PIC24EP32MC204-E/ML - 32KB Flash 60 MIPS 16-bit Motor MCU

PIC24EP32MC204-H/ML - 16-bit 70MIPS DSC 32KB Flash 44-QFN | Microchip

PIC24EP32MC204-H/PT - 70 MIPS Motor Control MCU | Microchip

PIC24EP32MC204-H/TL - 70 MIPS Motor Control MCU, 32KB Flash | Microchip

PIC24EP32MC204-I/ML - 70 MIPS 32KB Flash Motor Control MCU | Microchip

PIC24EP32MC204-I/PT - 70 MIPS 32KB Flash Motor Control MCU | Microchip

PIC24EP32MC204-I/TL - 16-bit 70 MIPS 32KB Flash MCU | Microchip

PIC24EP32MC204T-E/ML - 16-bit 60 MIPS Motor Control MCU | Microchip

PIC24EP32MC204T-E/PT - 60 MIPS 32KB Flash Motor MCU | Microchip