Integrated Circuits

Subcategories

📁 ADC/DAC 3,100+ products 📁 Amplifier ICs 1,900+ products 📁 Audio Codecs 18 products 📁 Audio ICs 2 products 📁 Clock & Timing 660+ products 📁 Comparator ICs 1 products 📁 DSP 1,100+ products 📁 Data Acquisition ICs 2 products 📁 Digital Potentiometers 4 products 📁 Display Drivers & Controllers 1 products 📁 FPGA & CPLD 7,300+ products 📁 Interface ICs 3,300+ products 📁 LED Drivers 1 products 📁 Logic ICs 460+ products 📁 Memory ICs 870+ products 📁 Microcontrollers 20,000+ products 📁 Microprocessors 4 products 📁 Motor Drivers 1 products 📁 Other 1 products 📁 Sensor and Detector Interfaces 1 products 📁 Specialized ICs 15 products 📁 Video ICs 14 products

Products (39,000+)

ADSP-1009AKN - 12-Bit DSP Multiplier Accumulator | Analog Devices
ADSP-1009AKN

ADSP-1009AKN - 12-Bit DSP Multiplier Accumulator | Analog Devices

The Analog Devices ADSP-1009AKN is a 12-bit digital signal processing multiplier-accumulator with a 12 x 12 multiplier, a 32-bit accumulator, and a 64-pin plastic dual-inline package. The supplied distributor data identifies it as a dedicated DSP multiplier-accumulator/summer rather than a general-purpose microprocessor, providing a hardware path for repeated multiplication and accumulation operations. A digital multiplier-accumulator is a specialized arithmetic IC within the digital signal processing and semiconductor hierarchy. Its internal multiplier generates a full product from two binary operands, while the accumulator adds that product to a previously stored result. This allows multiply-accumulate operations to be performed directly in hardware, reducing the number of sequential instructions required in filtering, correlation, waveform-generation, and similar signal-processing algorithms. The ADSP-1009AKN provides 12-bit multiplier operands and a 32-bit accumulator. Its dedicated architecture is useful when an algorithm repeatedly executes operations of the form Y = Y + A multiplied by B. The device therefore belongs to the DSP peripheral and arithmetic-processing category, where parallel hardware execution can simplify implementation relative to software routines running on a general-purpose processor. The verified product information specifies a PDIP64 plastic DIP-64 package. The package provides 64 through-hole pins and is intended for conventional PCB assembly through plated holes rather than a surface-mount land pattern. Available source snippets do not provide the detailed clock range, supply voltage, throughput, control-signal timing, output organization, or electrical ratings required for a complete timing and power design. Typical uses include digital filtering, convolution, signal correlation, control calculations, adaptive-filter implementations, and other DSP pipelines containing recurring multiply-accumulate operations. The part can also serve as an arithmetic building block in educational, instrumentation, industrial-control, and legacy signal-processing equipment where a dedicated multiplier-accumulator is preferred over a general-purpose CPU. Designers should verify clock and timing limits, required control sequences, output-word handling, and signal-level compatibility against the manufacturer datasheet before creating a new PCB. Because the available evidence does not include a complete official pin assignment, the safest practice is to follow the Analog Devices documentation rather than infer connections from distributor classifications. This page combines verified package and function information, sourcing links, selection guidance, and design cautions without presenting unavailable electrical parameters as facts.

RFQ Contact
ADSP-1010AJD - 16-Bit DSP Multiplier | Analog Devices
ADSP-1010AJD

ADSP-1010AJD - 16-Bit DSP Multiplier | Analog Devices

Analog Devices ADSP-1010AJD is a 16-bit DSP multiplier/accumulator/summer packaged as a 64-terminal, side-brazed CDIP through-hole device. It combines a 16 x 16-bit multiplier with a 35-bit output data bus, operating from a 5 V power supply. The commercial-grade component is designed for signal-processing systems that require dedicated multiplication, accumulation, and summation functions. A DSP multiplier/accumulator is a specialized arithmetic semiconductor used within digital signal processing, digital communications, control, and instrumentation equipment. Its multiplier forms the product of two signed 16-bit operands, while the accumulator and summer add that product into a wider internal result. This device therefore belongs to the DSP peripheral hierarchy rather than the general-purpose microprocessor category. The principal features include a 16-bit external data bus, a 35-bit output data bus, 64 terminals, and a 5 V supply. Its dedicated arithmetic architecture can offload multiply-and-accumulate operations from a host processor, reducing processor execution time in filtering, modulation, correlation, waveform-generation, and signal-analysis systems. The wide 64-terminal CDIP-64 package provides numerous signal, control, data, clock, and supply connections for high-throughput parallel operation. The ADSP-1010AJD occupies the multiplier/accumulator/summer position in a DSP subsystem. Its separate 16-bit input bus and 35-bit output bus accommodate narrow operand transfer and wider accumulated results. This organization can simplify an arithmetic pipeline when the surrounding digital logic expects a dedicated high-speed multiplication stage and a full-width result from the accumulator. Typical uses include digital filter coefficient multiplication, communication-signal processing, industrial control and measurement, instrumentation signal analysis, and custom accelerator logic for parallel-processing systems. It may also be useful in educational and research platforms designed to demonstrate multiply-accumulate arithmetic with a discrete DSP peripheral. The primary design consideration is system-level timing and data-width compatibility. The host processor, bus interface, clocking, and output capture logic must be designed around the device's 16-bit input and 35-bit output widths. Because the CDIP-64 package has 64 terminals, PCB layout must preserve the manufacturer's numbering and provide adequate routing clearance between closely spaced through-hole connections. This product page combines the confirmed ADSP-1010AJD characteristics with practical application guidance, package information, comparison fields, and sourcing instructions. It is intended to help engineers identify the correct arithmetic peripheral, plan the associated digital interface, and evaluate whether a documented replacement can be used without redesign.

RFQ Contact
ADSP-1010AJN - 16-Bit DSP Multiplier Accumulator | Analog Devices
ADSP-1010AJN

ADSP-1010AJN - 16-Bit DSP Multiplier Accumulator | Analog Devices

The Analog Devices ADSP-1010AJN is a 16-bit digital multiplier/accumulator designed for DSP peripheral applications, with a full 32-bit product output and an optional 32-bit accumulator output. The device is supplied in a 64-lead PDIP package and is identified by the supplied distributor data as a DSP peripheral multiplier/accumulator/summer in commercial temperature grade. A digital multiplier/accumulator is a fixed-function arithmetic peripheral used to calculate products and accumulate sequential results inside signal-processing systems. In the broader electronics hierarchy, it belongs to the DSP peripheral category and supports the wider digital signal processing and embedded processing ecosystems. Its dedicated arithmetic function can reduce processor overhead when implementing filters, correlation, scaling, polynomial evaluation, or complex signal-chain operations. The ADSP-1010AJN provides a 16-bit multiplier with a full 32-bit product and an optional 32-bit accumulator output. The supplied product listings classify it as a linear analog multiplier/divider or DSP peripheral, while the official distributor description identifies it as a high-performance 16-by-16 digital multiplier/accumulator. Its through-hole PDIP-64 package is suited to legacy industrial, instrumentation, communication, and educational systems where a socketed or through-hole implementation simplifies assembly and replacement. The ADSP-1010AJN is intended for designers building fixed-point arithmetic subsystems around DSP controllers, microprocessors, or general-purpose digital logic. Typical uses include digital filter coefficient multiplication, signal correlation, adaptive arithmetic, waveform generation, and multiply-accumulate stages. Because the device performs a dedicated arithmetic operation, it can offload repeated product calculations that would otherwise consume processor instruction cycles. The package and signal details must be confirmed against the manufacturer datasheet before layout or replacement. The available verified web data confirms the PDIP-64 package, commercial temperature grade, 16-bit multiplier, 32-bit product output, and optional 32-bit accumulator output. Detailed supply voltage, clock timing, input and output logic levels, control-pin definitions, maximum operating frequency, and absolute maximum ratings were not included in the supplied source extract and therefore are not inferred here. ADSP-1010AJN procurement should be treated as a lifecycle-sensitive sourcing decision. The verified distributor results include marketplace availability from Rochester Electronics and multiple authorized or independent distributor listings, but they do not provide a complete current manufacturer lifecycle statement. Engineers should confirm stock, lead time, exact package markings, and date-code traceability before production release. This page combines the verified distributor specifications, sourcing references, package information, and practical selection guidance for the ADSP-1010AJN. It also distinguishes confirmed data from unresolved details and avoids presenting guessed pinout, timing, pricing, or lifecycle information as manufacturer facts.

RFQ Contact
ADSP-1010AKD - 16-Bit DSP Multiplier Accumulator | ADI
ADSP-1010AKD

ADSP-1010AKD - 16-Bit DSP Multiplier Accumulator | ADI

The Analog Devices ADSP-1010AKD is a 16-bit multiplier-accumulator and summer DSP peripheral housed in a hermetically sealed, side-brazed ceramic DIP-64 package. It is designed to add dedicated multiplication, accumulation, and summing functions to digital signal-processing systems. The device is a commercial-temperature, through-hole component with 64 terminals and a rectangular package. A multiplier-accumulator is a digital arithmetic building block that multiplies two numerical operands and accumulates the result with a third value. In the broader semiconductor hierarchy, the ADSP-1010AKD is a DSP peripheral, a dedicated processor-adjacent IC used to extend the arithmetic throughput of general-purpose digital controllers. It can reduce the execution burden of filters, correlators, signal analyzers, and control loops by handling repetitive multiply-accumulate operations in parallel hardware. The ADSP-1010AKD combines a 16-bit arithmetic datapath with multiplier, accumulator, and summer functions in one integrated circuit. Its dedicated arithmetic organization makes it particularly relevant to sampled-signal systems where multiply-accumulate operations dominate the processing load. The 64-terminal ceramic package supports conventional through-hole PCB assembly while providing separate connections for power, clocking, control, operand inputs, and accumulated results. Because it is a DSP peripheral rather than a standalone microprocessor, the ADSP-1010AKD normally operates with a host processor or DSP. The surrounding controller determines addresses, operands, sequencing, and result handling, while the ADSP-1010AKD performs the dedicated arithmetic function. This division of responsibility can improve throughput in applications with repetitive convolution, correlation, scaling, and summation tasks. Typical applications include digital filter implementations, spectrum-analysis equipment, audio and communication signal processing, industrial control systems, and instrumentation. Its 16-bit word width makes it suitable for signal-processing architectures that operate at conventional 16-bit resolution, while the commercial temperature grade targets equipment operating within the corresponding manufacturer-specified commercial range. Designers should verify the complete pin assignment, supply requirements, timing limits, and output behavior against the manufacturer datasheet before layout. Because this is a side-brazed ceramic DIP-64 device, PCB footprint selection, insertion, socket compatibility, thermal performance, and handling require more care than with modern plastic surface-mount packages. This page organizes the documented device identity, package characteristics, purchasing path, and design considerations for engineers evaluating the ADSP-1010AKD. Direct parameter comparison and drop-in substitution should be performed only after confirming the full manufacturer pinout, electrical limits, and timing behavior for the intended production application.

RFQ Contact
ADSP-1010AKG/+ - 16-Bit Multiplier Accumulator | Analog Devices
ADSP-1010AKG/+

ADSP-1010AKG/+ - 16-Bit Multiplier Accumulator | Analog Devices

The Analog Devices ADSP-1010AKG/+ is a 16-bit CMOS digital multiplier with multiplier-accumulator and summer functions, housed in a 68-pin ceramic pin-grid-array package. It provides a 16-bit external data bus, a 35-bit output data bus, and a maximum supply current of 80 mA. The device operates from 0 °C to +70 °C and is intended for applications requiring dedicated parallel arithmetic rather than general-purpose programmable signal processing. A digital multiplier is a combinational or arithmetic logic device that multiplies two binary operands and presents the resulting product through dedicated data inputs and outputs. The ADSP-1010 belongs to the broader arithmetic-processing hierarchy that includes multiplier-accumulators, digital summers, fixed-point signal-processing blocks, and DSP peripherals. Its dedicated architecture can implement multiplication and accumulation directly in parallel hardware, reducing the number of software operations required in filtering, correlation, scaling, and waveform-processing systems. The verified specifications identify the ADSP-1010AKG/+ as a 16-bit multiplier-accumulator/summer using CMOS technology. Its 35-bit output data path is wider than the 16-bit external data bus, supporting expanded intermediate or accumulated results. The maximum supply current is 80 mA, while the 0 °C to +70 °C operating-temperature range identifies it as a commercial-temperature device rather than an automotive or extended-temperature grade. A 68-pin ceramic PGA package provides the physical lead arrangement needed for this older high-pin-count signal-processing component. Typical uses include fixed-point digital filters, correlation and sequence-generation systems, real-time signal transformation, custom accelerator logic, and other parallel arithmetic pipelines. The device is most appropriate when the system requires deterministic multiplication throughput and can accommodate a dedicated external arithmetic block instead of relying entirely on a DSP or microcontroller. Designers should verify the complete pin assignment, timing, supply-voltage requirements, and output-width interpretation against the manufacturer datasheet before layout or schematic release. Because the supplied web data identifies a ceramic PGA package but does not provide a verified pin map, the package diagram is intentionally represented by the library default rather than an invented 68-pin drawing. Production sourcing should also account for the apparent age and limited distributor availability of this legacy device.

RFQ Contact
ADSP-1010AKN - 16x16 DSP Multiplier Accumulator | Analog Devices
ADSP-1010AKN

ADSP-1010AKN - 16x16 DSP Multiplier Accumulator | Analog Devices

The Analog Devices ADSP-1010AKN is a commercial-grade, 16-by-16-bit DSP multiplier-accumulator with a 35-bit output data bus, supplied in a 64-pin PDIP package. It operates from a single 5 V supply over an ambient temperature range of 0°C to 70°C. The component combines analog multiplier, accumulator, and summer functions for precision signal-processing and control-system designs. A DSP multiplier-accumulator is a specialized arithmetic IC that multiplies two numerical operands and accumulates the result. It belongs to the multiplier/divider family, then to arithmetic and DSP peripheral ICs, and ultimately to the broader semiconductor category. Such devices reduce the number of external arithmetic operations required in digital signal processing, filtering, modulation, control, and instrumentation systems. The verified product information identifies the ADSP-1010AKN as a 16-bit DSP multiplier and accumulator with a 35-bit output data bus. Its 64-terminal PDIP package provides a through-hole footprint suitable for conventional PCB assembly and prototype development. The 5 V supply requirement simplifies system design where modern 3.3 V processors interface through appropriately designed level-shifting or conversion stages. The ADSP-1010AKN is categorized as a DSP peripheral and is also described by distributors as a linear analog multiplier/divider with multiplier-accumulator and summer capability. This combination of functions is useful in filter coefficient multiplication, state-variable arithmetic, waveform generation, adaptive processing, and closed-loop control calculations. Exact clock, accuracy, noise, and throughput details must be confirmed in the manufacturer datasheet before precision timing or signal-chain design. Typical applications include digital filter implementations, industrial control loops, measurement and test equipment, communication signal processing, and embedded DSP modules. In these systems, the multiplier-accumulator can form the arithmetic core of a wider processor-assisted architecture when throughput and numerical resolution match the surrounding software and bus requirements. Designers should verify pin functions, control timing, supply sequencing, and operating limits against the manufacturer datasheet before layout. Because the verified data provides a PDIP-64 package but not a complete pin map, board designers should obtain the official datasheet before assigning every signal to a PCB net. Spare logic and unused pins must be handled according to that document rather than inferred from the package alone. This page consolidates verified distributor inventory, pricing, package, temperature, and interface information for the ADSP-1010AKN, while clearly separating unverified parameters. It also documents replacement constraints, practical use cases, and design risks so engineers can make a more reliable sourcing and design decision than a basic distributor listing provides.

RFQ Contact
ADSP-1010BJG - 16-Bit DSP Multiplier/Accumulator | Analog Devices
ADSP-1010BJG

ADSP-1010BJG - 16-Bit DSP Multiplier/Accumulator | Analog Devices

Analog Devices ADSP-1010BJG is a 16-bit DSP peripheral multiplier/accumulator designed for high-speed arithmetic within digital signal-processing systems. The verified product information identifies a 35-bit output data-bus width, 16-bit external data-bus width, nominal 5 V supply voltage, and maximum supply current of 110 mA. It is packaged in a hermetically sealed 68-pin ceramic pin-grid-array package designated PGA-68 or CPGA68. A DSP multiplier/accumulator is a specialized arithmetic block that multiplies two signed or unsigned operands and combines the result with a wider accumulation value. This wider result path can support fixed-point operations in which multiplication products require additional guard bits. In the broader semiconductor hierarchy, the ADSP-1010BJG is a DSP peripheral, a supporting integrated circuit that accelerates arithmetic tasks used by a microprocessor, digital signal processor, or other programmable control system. The ADSP-1010BJG's 16-bit multiplier and accumulator organization, 35-bit result bus, and 16-bit external data interface position it for digital filtering, waveform generation, signal analysis, and other fixed-point processing systems. Its nominal 5 V operating supply and reported maximum supply current of 110 mA are important for power-budget and interface planning. The commercial temperature grade and hermetically sealed ceramic package indicate a part intended for industrial and professional equipment rather than a compact plastic consumer-device package. The device should be treated as a dedicated arithmetic subsystem rather than a standalone processor. System designers must connect it to an external processor or DSP through the documented parallel data and control interfaces, coordinate result timing, and provide suitable input, output, clock, and grounding arrangements. Because the available verified snippets do not provide the complete pin assignment, clock limits, voltage tolerances, or timing characteristics, those values must be confirmed in the manufacturer documentation before layout or firmware development. Typical uses include fixed-point FIR filtering, complex-number arithmetic, digital oscillator and waveform-generation blocks, and real-time control systems where multiplication throughput is needed. Its wide accumulator path can reduce the number of software operations required to retain intermediate precision. System partitioning should compare this discrete accelerator with an internal DSP or FPGA multiplier to ensure that the added package, interface logic, and supply requirements provide a worthwhile performance benefit. The principal design consideration is interface verification. The 68-pin ceramic PGA package has a large footprint and must be handled as a leaded through-hole component. Designers should follow the manufacturer pinout and layout guidance rather than infer PGA-68 pin assignments from a generic package library. Power and return paths also require careful planning because concurrent multiplier and accumulator operations can create high-speed current transients. This page consolidates the verified distributor specifications, commercial sourcing context, package details, and engineering constraints for ADSP-1010BJG. It also distinguishes confirmed parameters from missing datasheet data and does not present unverified substitute parts as drop-in replacements.

RFQ Contact
ADSP-1010BJP - 16-Bit DSP Multiplier | Analog Devices
ADSP-1010BJP

ADSP-1010BJP - 16-Bit DSP Multiplier | Analog Devices

The Analog Devices ADSP-1010BJP is a 16-bit digital multiplier-accumulator/summer DSP peripheral housed in a 68-pin plastic leaded chip carrier (LCC-68) package. The device is positioned for fixed-point signal-processing systems that require a dedicated multiplier-accumulator function alongside general-purpose digital logic. Its 16-bit architecture and 68-lead package are the principal verified identifiers available for the ADSP-1010BJP. A digital multiplier-accumulator, or MAC, is a signal-processing building block that multiplies two numerical operands and then adds or accumulates the result. This function is central to digital filtering, correlation, waveform generation, adaptive processing, and other polynomial or convolution-based calculations. Within the broader hierarchy of digital signal processing, the ADSP-1010BJP belongs to the DSP peripheral category rather than a general-purpose microprocessor or FPGA. The verified product information identifies the ADSP-1010BJP as a 16-bit DSP multiplier-accumulator/summer. Because its arithmetic width is 16 bits, the device is associated with 16-bit digital datapaths and is categorized by distributors under DSP peripherals and linear analog multipliers. Its ceramic leaded chip carrier construction provides 68 physical connection points for interfacing the device to surrounding digital circuitry. The ADSP-1010BJP combines multiplication and accumulation in one dedicated block, allowing a digital signal-processing system to reduce software instruction overhead compared with implementing each operation through separate general-purpose instructions. Its value is most relevant in designs where repeat multiply-and-add calculations dominate the processing workload, including filtering, correlation, scaling, and related signal-chain functions. Typical uses include industrial digital signal processing, audio and communications filtering, modulation-related calculations, instrumentation, and embedded control systems with dedicated arithmetic requirements. The LCC-68 package favors through-hole PCB assembly and legacy or industrial equipment rather than compact surface-mount consumer designs. Designers should verify the complete pinout, operating limits, clocking method, and arithmetic timing against the manufacturer datasheet before layout or production use. The supplied web sources do not expose those details, so they have not been inferred. Availability should also be confirmed because marketplace inventory and distributor pricing can change without notice. This page consolidates the verified distributor descriptions, package identification, market listings, and sourcing information for the ADSP-1010BJP. It adds engineering-focused selection guidance while clearly separating confirmed facts from parameters that still require verification from the manufacturer datasheet.

RFQ Contact
ADSP-1012AJG - 12-Bit DSP Multiplier | Analog Devices | PGA-68
ADSP-1012AJG

ADSP-1012AJG - 12-Bit DSP Multiplier | Analog Devices | PGA-68

The Analog Devices ADSP-1012AJG is a 12-bit CMOS digital multiplier and DSP peripheral with a 12 x 12 multiplier configuration, 5 V nominal supply, and a hermetically sealed 68-pin ceramic PGA package. The device is designed for applications requiring dedicated parallel multiplication, including digital signal processing, communications, industrial control, and embedded arithmetic pipelines. Its 24-bit output data bus width and 60 mA maximum supply current are listed in the verified distributor and marketplace records for this part. A digital multiplier is a specialized semiconductor that multiplies two binary operands and presents the result on a parallel data bus. Unlike a general-purpose microprocessor or DSP, the ADSP-1012AJG provides a fixed arithmetic function that can reduce processor workload and simplify hardware pipelines. It belongs to the broader category of DSP peripherals and arithmetic integrated circuits, where fixed-function parallel processing can provide predictable timing and efficient throughput. The verified part data identifies the ADSP-1012AJG as a 12-bit DSP multiplier in a CPGA68, hermetic-sealed PGA-68 package. The commercial temperature grade, square package shape, 68 terminals, and 5 V nominal operating voltage support use in equipment requiring a traditional through-hole ceramic package. The package is specified as approximately 27.89 mm by 27.89 mm in the marketplace data, although detailed mechanical tolerances are not supplied in the verified material. The component provides a 24-bit output data bus and a maximum supply current of 60 mA. Its fixed multiplier architecture is suitable for digital filtering, modulation, correlation, scaling, and other real-time arithmetic operations where a parallel implementation is preferable to executing a multiply instruction in a general-purpose controller. The available verified records do not specify throughput, clock rate, input timing, logic levels, temperature limits, or output-drive characteristics. Typical design roles include a communications signal-processing channel, an industrial control arithmetic block, a test and measurement data path, and a custom digital filter or correlator. System designers should verify the complete pinout and timing specifications against the manufacturer datasheet before layout, because the public verified results provide the package and basic function but not a complete pin-level description. When designing around this part, use the manufacturer’s authoritative data sheet for pin assignment, control signals, input and output timing, and supply sequencing. The hermetically sealed PGA-68 package is mechanically different from modern leadless packages and requires a compatible through-hole PCB footprint, adequate clearance, and careful connector alignment.

RFQ Contact
ADSP-1012AJN - 12-Bit DSP Multiplier | Analog Devices
ADSP-1012AJN

ADSP-1012AJN - 12-Bit DSP Multiplier | Analog Devices

The Analog Devices ADSP-1012AJN is a 12-bit CMOS DSP multiplier with a 12-bit by 12-bit multiplication architecture, supplied in a 64-pin plastic PDIP package. The device is intended for digital signal-processing systems that require dedicated multiplication, arithmetic acceleration, or embedded DSP peripheral functionality without implementing a complete general-purpose processor. A DSP multiplier is a specialized integrated circuit that performs binary multiplication more efficiently than a general-purpose processor executing a software multiplication routine. The ADSP-1012AJN belongs to the broader hierarchy of digital multiplier, arithmetic processor, DSP peripheral, and semiconductor. Its dedicated multiplier function can reduce computational overhead in signal-processing, control, measurement, and embedded data-acquisition systems. The verified manufacturer-related listing identifies the ADSP-1012AJN as a 12-bit DSP multiplier using CMOS technology. The 12-bit by 12-bit operand format provides a concrete indication of its intended arithmetic role, while the PDIP-64 package supports conventional through-hole PCB assembly. The supplied evidence does not specify clock rate, throughput, power consumption, accuracy, operating temperature, supply voltage, or input-output timing, so those characteristics should be confirmed in the manufacturer datasheet before design release. The ADSP-1012AJN is categorized by distributors as a DSP peripheral and linear or analog multiplier/divider product. This positioning distinguishes it from general-purpose microprocessors and software DSP controllers: it is a dedicated arithmetic function intended to accelerate multiplication inside a larger digital system. Verification is important because the available excerpts do not describe the complete internal interface, control protocol, or register model. Typical uses include digital filter implementations, control-loop calculations, measurement and instrumentation signal chains, embedded DSP subsystems, and educational or laboratory multiplier designs. In each case, the ADSP-1012AJN can provide a dedicated 12-bit multiplication path while surrounding logic handles data acquisition, sequencing, memory, and system-level control. For new designs, engineers should obtain the full Analog Devices datasheet before committing the 64-pin footprint. Review the electrical limits, timing diagrams, pin functions, input and output coding, control signals, operating-temperature limits, and recommended decoupling. The public listing identifies a 64-pin PDIP package but does not expose a verified pin-by-pin assignment, so an exposed-pad or modern surface-mount substitute should not be assumed pin compatible. This product page combines verified distributor pricing, stock information, package data, and same-family alternatives with practical selection guidance. It also separates confirmed ADSP-1012AJN attributes from unverified electrical details, helping engineers identify what is known, what requires datasheet review, and where a true drop-in replacement is still necessary.

RFQ Contact
ADSP-1012AJP - 12x12 CMOS Multiplier | Analog Devices
ADSP-1012AJP

ADSP-1012AJP - 12x12 CMOS Multiplier | Analog Devices

Analog Devices ADSP-1012AJP is a 12 x 12 CMOS analog multiplier integrated circuit in a 68-LCC J-lead package. The device combines two analog signal inputs with a scaling function to produce a multiplied output, making it suitable for precision analog signal-processing, modulation, control, and measurement systems. Verified distributor information identifies the part as a CMOS multiplier and lists it in a 68-LCC J-lead package. An analog multiplier is a signal-processing IC that performs mathematical multiplication of two voltage signals. Within the broader semiconductor hierarchy, it is a linear analog circuit, a functional analog multiplier, and a member of the wider signal-processing IC category. Unlike a digital multiplier implemented inside a microprocessor or DSP, this CMOS device operates directly in the analog domain and can participate in modulation, feedback, gain-control, and measurement circuits without requiring digital conversion at every stage. The key verified identifiers are the 12 x 12 multiplier resolution and the 68-LCC J-lead package. The suffix AJP identifies the particular Analog Devices ordering variant, while the package arrangement is available through distributors that provide pinout diagrams and manufacturer documentation. LCSC identifies the ADSP-1012AJP as in stock with a starting price of $6.4755, whereas Rochester Electronics lists original packaged units beginning at $261.05, reflecting the wide market spread associated with legacy analog components. The ADSP-1012AJP belongs to the CMOS multiplier product class. Its technical characteristics should be evaluated from the ADI manufacturer datasheet before signal-chain design, particularly input and output voltage ranges, bandwidth, accuracy, supply requirements, scaling behavior, reference inputs, and recommended operating conditions. Those parameters were not included in the supplied verified excerpts and therefore are not inferred here. Typical design roles include analog modulation and demodulation, programmable gain stages, closed-loop control products, instrumentation, and laboratory signal processing. The 68-LCC J-lead package makes the device particularly relevant to older leaded industrial, instrumentation, and aerospace-style assemblies where a modern fine-pitch surface-mount package would not fit the existing board pattern. Engineers should verify the complete manufacturer pinout and application circuit before PCB release. Because the verified excerpts do not provide individual pin numbers, electrical limits, or a public pin table, the package diagram is not fabricated here. The correct design process is to confirm every connection, power rail, bypass requirement, and signal-conditioning component against the official ADI datasheet. This page combines verified distributor availability, exact package information, and pricing references with explicit data-gap markers. It also provides application guidance and engineering cautions for a legacy CMOS multiplier without presenting unverified electrical specifications as factual. Buyers can use the linked LCSC datasheet and manufacturer documentation for procurement, pin verification, and production design decisions.

RFQ Contact
ADSP-1012AKD/+ - 12-Bit CMOS Multiplier | Analog Devices
ADSP-1012AKD/+

ADSP-1012AKD/+ - 12-Bit CMOS Multiplier | Analog Devices

Analog Devices ADSP-1012AKD/+ is a 12-bit DSP multiplier containing a 12 x 12 CMOS multiplier array in a hermetically sealed 64-pin ceramic dual in-line package. The supplied product information identifies the device as a digital multiplier and DSP peripheral, while the CDIP64 package uses side-brazed ceramic construction associated with reliability-oriented industrial and military equipment. Its core function is the multiplication of two 12-bit binary values, producing a 24-bit result within the multiplier architecture. A DSP multiplier is a specialized digital signal processing IC optimized for high-speed multiplication operations used in signal analysis, waveform generation, filtering, modulation, and arithmetic pipelines. Its place in the semiconductor hierarchy is DSP > digital signal processor > arithmetic processing IC > integrated circuit. Compared with a general-purpose microprocessor, the ADSP-1012AKD/+ provides a dedicated hardware multiplier for applications where predictable arithmetic performance and parallel signal processing are more important than software flexibility. The verified distributor records identify the ADSP-1012AKD/+ as a 12-bit DSP multiplier with a 12 x 12 CMOS multiplier configuration. The device is offered in a 64-CDIP package with hermetic sealing and side-brazed ceramic construction. One distributor record also classifies the part as an analog multiplier or divider, although the manufacturer identification and the DSP-multiplier descriptions are the more useful classification for component search and engineering selection. The verified record lists a moisture sensitivity level of 3 with a 168-hour floor-life exposure limit. This handling information is important because the hermetically sealed ceramic package does not eliminate the need for controlled moisture procedures during assembly, soldering, transport, and storage. The exposed ceramic body and side-brazed connections also require soldering-process control capable of heating the package without producing hidden interconnect damage. Typical engineering uses include fixed-point signal processing, digital filtering, oscillator and waveform synthesis, adaptive control arithmetic, modulation processing, and instrumentation signal analysis. The dedicated 12 x 12 multiplication function can simplify parallel datapaths where repeated multiply operations would otherwise consume processor cycles. System designers still need to confirm clock timing, control-signal behavior, output latency, input and output word organization, and power-supply requirements against the manufacturer datasheet before creating a production schematic. Hermetic CDIP64 construction is the principal practical distinction of this version. Unlike a plastic PDIP64 option, the ceramic package offers a mechanically robust, sealed environment but requires attention to insertion, cleaning, soldering, thermal cycling, and lead-handling practices. The correct companion logic and interface devices must also be selected from the same system-level timing and voltage requirements rather than inferred only from the target MPN. This page consolidates the verified package, resolution, compliance, distributor, and lifecycle-relevant observations for ADSP-1012AKD/+ and separates them from unverified parameters. It also documents why no pin-compatible substitutes are recommended without manufacturer-level pinout and cross-reference evidence. That distinction helps engineers avoid treating a superficially similar DSP multiplier as a safe drop-in replacement.

RFQ Contact
ADSP-1012AKG - 12 x 12-Bit CMOS Multiplier | Analog Devices
ADSP-1012AKG

ADSP-1012AKG - 12 x 12-Bit CMOS Multiplier | Analog Devices

The Analog Devices ADSP-1012AKG is a 12 x 12-bit CMOS digital multiplier with DSP-peripheral functionality in a hermetically sealed 68-pin ceramic PGA package. The device is identified by verified distributor records as a high-linearity analog multiplier/divider with low-distortion performance, making it suitable for precision signal-processing, digital-signal-conditioning, instrumentation, and industrial-control systems where fixed-point multiplication must be integrated close to a digital processor. A digital multiplier is a specialized arithmetic semiconductor that multiplies two binary numbers and produces a wider result. The ADSP-1012AKG belongs to the broader DSP peripheral hierarchy: digital multiplier → DSP peripheral → signal-processing IC → integrated circuit. Unlike a general-purpose microprocessor, this device can execute the multiply operation as a dedicated hardware function, reducing processor workload and supporting predictable throughput in control, measurement, and modulation systems. The verified product classification identifies the ADSP-1012AKG as a 12 x 12-bit CMOS multiplier. Its CMOS implementation provides the component category expected for mixed digital and analog signal-processing equipment, while the hermetically sealed PGA-68 package is intended for controlled industrial environments and applications where mechanical stability and environmental resistance are important. Distributor records also describe the multiplier as offering high linearity and low distortion, characteristics that matter when multiplication errors influence measurement accuracy or control-loop performance. The ADSP-1012AKG is especially relevant to real-time digital signal processing, automatic test equipment, industrial measurement, communications signal conditioning, and embedded control. In these systems, the multiplier can implement gain scaling, correlation operations, modulation products, and fixed-point arithmetic. A dedicated multiplier can improve execution regularity because the arithmetic operation is not necessarily implemented through a multi-instruction software sequence. Because this is a legacy hermetic PGA device, engineers should not treat generic modern-package substitutes as equivalent. Board-level replacement requires verification of the 68-pin ceramic PGA footprint, power rails, logic levels, timing, multiplier precision, and thermal environment. The available verified records confirm the PGA-68 format and 12 x 12-bit architecture, but they do not expose the complete electrical timing table or a manufacturer pin map. For new designs, start by reviewing the official Analog Devices documentation and the current distributor listings before committing to a PCB footprint. For repairs or legacy production, preserve the original 68-pin ceramic PGA land pattern and verify continuity, supply tolerances, and signal levels before installation. This page combines verified distributor data, package and architecture information, sourcing guidance, and clearly identified data gaps rather than presenting unsupported performance values. This page synthesizes verified pricing, availability records, package identification, and application guidance for the ADSP-1012AKG. It also distinguishes verified facts from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate procurement, replacement, and design-in decisions more efficiently.

RFQ Contact
ADSP-1012AKN - 12-Bit CMOS DSP Multiplier | Analog Devices
ADSP-1012AKN

ADSP-1012AKN - 12-Bit CMOS DSP Multiplier | Analog Devices

The Analog Devices ADSP-1012AKN is a 12 x 12 CMOS digital multiplier designed as a DSP peripheral for parallel multiply-accumulate and signal-processing operations. The device is supplied in a 64-pin PDIP package and is identified in distributor listings as an IC 12-bit DSP multiplier with a commercial temperature grade and through-hole terminals. The ADSP-1012AKN belongs to the DSP peripheral and analog multiplier/dider category, a functional grouping of ICs that accelerate multiplication inside digital signal-processing systems. Its 12 x 12 CMOS multiplier architecture supports high-throughput binary multiplication in applications where a general-purpose processor would spend more clock cycles executing a multiply operation. The component is intended to complement processors, DSP controllers, and other digital logic rather than replace them. Key documented characteristics include 12-bit multiplier resolution, a 12 x 12 CMOS multiplier function, a 64-pin PDIP package, and a commercial temperature grade. The verified distributor information also classifies the part as a DSP peripheral and analog multiplier/diver. Detailed electrical ratings such as supply voltage, throughput, propagation delay, power dissipation, and logic levels were not included in the retrieved source data and therefore require confirmation from the manufacturer datasheet before release into a new design. ADSP-1012AKN is best suited to digital filter, modulation, correlation, waveform-generation, and general-purpose multiply-accumulate designs where parallel multiplication improves processing throughput. A complete circuit still requires external control logic to present operands, latch the product, and transfer the result to a host processor. Because the package uses through-hole pins, it is easier to prototype and inspect than a fine-pitch surface-mount device, although it is larger and generally less appropriate for compact volume products. A critical design check is the undocumented clock and interface timing. Confirm operating speed, output settling time, input and output logic levels, and power-supply requirements from the manufacturer datasheet. Commercial-temperature inventory and distributor availability should also be reconfirmed before committing to a production schedule. This page consolidates distributor classification data, sourcing information, and cross-reference results while marking unavailable technical parameters explicitly rather than estimating them.

RFQ Contact
ADSP-1016AJD/+ - 16-Bit CMOS Multiplier | Analog Devices
ADSP-1016AJD/+

ADSP-1016AJD/+ - 16-Bit CMOS Multiplier | Analog Devices

Analog Devices ADSP-1016AJD/+ is a programmable analog multiplier and divider built around a 16 x 16 CMOS multiplier core and supplied in a hermetically sealed, side-brazed 64-pin ceramic DIP package. It is categorized as an analog multiplier/divider and DSP peripheral, providing a dedicated signal-processing function for precision control, measurement, and modulation systems. The verified product descriptions identify the device as a flexible, programmable multiplier/divider with a 16-bit CMOS multiplier architecture. An analog multiplier is a signal-processing IC whose output represents the product of two input voltages or codes. It belongs to the broader analog multiplier hierarchy, which is part of analog and mixed-signal signal-processing ICs. Unlike a general-purpose microprocessor or DSP, the ADSP-1016AJD/+ performs multiplication directly in the analog signal path. This can simplify control loops, modulation products, error calculations, and precision signal-conditioning circuits when the surrounding system is designed around the device's electrical characteristics. The primary verified features are the 16 x 16 CMOS multiplier core, programmable analog multiplier/divider operation, and a hermetically sealed CDIP-64 package. The ceramic side-brazed construction and sealed package support applications that require environmental robustness and long service life. The large 64-pin interface provides access to multiplier inputs, control logic, output stages, supply connections, and associated functions. Exact numerical details such as supply voltage, bandwidth, accuracy, input range, and logic levels require confirmation from the manufacturer datasheet. The ADSP-1016AJD/+ uses CMOS circuitry to implement its multiplication function. Its architecture is suited to precision control systems in which multiplication of two related variables is required repeatedly. The manufacturer positions the device as a programmable analog multiplier and divider, allowing a system designer to use it for signal products, analog computation, control-loop error terms, and related modulation functions. Operating-temperature ratings, settling behavior, and noise specifications cannot be confirmed from the supplied search results. Typical applications include precision servo and motion-control systems, industrial process measurement, instrumentation signal conditioning, communications modulation, analog signal analysis, and embedded DSP-adjacent control logic. In these systems, the multiplier can calculate a product term directly rather than requiring repeated software multiplication. The hermetically sealed CDIP-64 package is particularly useful where long product life and resistance to environmental exposure matter, although thermal verification is required for the actual board layout and enclosure. Designers should verify the official pinout, supply rails, signal input ranges, control timing, and output loading before designing a new PCB. Because this is a 64-pin through-hole ceramic package, layout planning must include adequate hole spacing, connector clearance, and mechanical support. Decoupling should follow the manufacturer datasheet once the pin assignments and recommended capacitors are confirmed. This product page combines verified distributor inventory information, package identification, pricing evidence, and replacement searches with engineering-focused selection guidance. It also distinguishes confirmed drop-in alternatives from unreferenced package variants, helping procurement and design teams avoid assuming that a similar amplifier or multiplier is electrically and mechanically interchangeable.

RFQ Contact
ADSP-1016AJG - 16x16 CMOS Multiplier | Analog Devices
ADSP-1016AJG

ADSP-1016AJG - 16x16 CMOS Multiplier | Analog Devices

The Analog Devices ADSP-1016AJG is a 16 x 16 CMOS digital multiplier housed in a 68-pin ceramic pin-grid-array package measuring 27.89 mm x 27.89 mm. It is designed for systems requiring a dedicated parallel multiplication function rather than a general-purpose processor-based calculation. The verified product classification identifies the device as a linear analog multiplier/divider, while other distributor records identify it as a digital multiplier. Its 16 x 16 architecture supports multiplication of two 16-bit operands, and the ceramic PGA package provides a high-pin-count, leaded format for established laboratory, industrial, aerospace, and legacy digital-signal-processing equipment. A CMOS multiplier is a specialized arithmetic semiconductor that converts two parallel binary numbers into their product. It belongs to the broader digital multiplier hierarchy and ultimately to the integrated-circuit and digital-signal-processing semiconductor categories. Unlike a switching regulator or linear voltage regulator, this component performs arithmetic rather than power conversion. Its dedicated multiplier architecture can simplify designs that previously required processor firmware, programmable logic, or several discrete arithmetic blocks. The principal verified features are the 16 x 16 multiplication capability, CMOS construction, and 68-BCPGA package. The exact input-output interface, clocking method, throughput, electrical ratings, and environmental limits are not present in the supplied records and therefore require confirmation from the manufacturer datasheet. Because no verified pricing table, manufacturer PDF, or full pinout was supplied, this page avoids assigning unverified frequency, voltage, temperature, or timing values. The device is offered in bulk with a standard package quantity of one. The ADSP-1016AJG is relevant to digital signal processing, control, communications, instrumentation, and test systems where multiplication is part of a recurring calculation chain. Its parallel 16 x 16 organization is especially relevant to filtering, waveform generation, correlation, scaling, and fixed-point arithmetic implementations. The 68-pin PGA footprint is mechanically distinct from modern leadless packages, so replacement work requires a full pinout, logic-level, timing, and environmental comparison rather than a footprint-only assumption. Typical legacy applications include laboratory filter and modulation experiments, industrial control and instrumentation, communications signal processing, and specialized aerospace or defense test equipment. In these systems, the multiplier can offload a computationally intensive operation from a microprocessor or programmable logic device. Designers should confirm throughput and data-bus behavior before deciding whether a software implementation, FPGA DSP block, or dedicated multiplier provides the best lifecycle and performance balance. The main design consideration is replacement risk. The verified sources provide the package dimensions and 16 x 16 function, but not the complete pinout, timing characteristics, supply requirements, or lifecycle program. Board designers should preserve the original PGA land pattern, verify every signal, and conduct system-level equivalence testing. This page combines verified package and function data with explicit data-gap markers rather than presenting unverified electrical claims as manufacturer specifications. This product record adds engineering context unavailable in a basic distributor listing: it separates confirmed specifications from missing data, documents the strict limits on drop-in substitution, and provides practical implementation guidance for legacy digital signal processing, precision control, communications, and laboratory systems. It also links the available pricing and stock references so procurement teams can request a quotation while engineers verify the original datasheet and footprint.

RFQ Contact
ADSP-1016AJN - 16 x 16 CMOS Multiplier | Analog Devices
ADSP-1016AJN

ADSP-1016AJN - 16 x 16 CMOS Multiplier | Analog Devices

The Analog Devices ADSP-1016AJN is a 16 x 16 CMOS digital multiplier housed in a 64-pin through-hole DIP package. The verified product data identifies the device as a linear-analog multiplier/divider and DSP peripheral, with a commercial temperature grade and a rectangular 64-DIP package. The component is intended for systems requiring dedicated multiplication of two 16-bit operands in a parallel digital signal-processing architecture. A digital multiplier is a specialized arithmetic IC within the broader DSP and embedded signal-processing hierarchy. Instead of implementing multiply operations as a sequence of shift-and-add instructions in a general-purpose processor, a dedicated multiplier can calculate a complete product combination in parallel. The ADSP-1016AJN therefore belongs to the CMOS DSP peripheral category and can be positioned between a digital data source and a downstream accumulator, control, measurement, or signal-conditioning circuit. The principal verified feature is a 16 x 16 multiplication format. This permits two 16-bit unsigned values to be represented by a 32-bit product, subject to the device's exact arithmetic and timing details specified in the manufacturer documentation. Additional electrical characteristics, such as supply voltage, operating frequency, propagation delay, input logic levels, output timing, and power consumption, were not included in the supplied verified records and require confirmation from the Analog Devices datasheet before design release. Typical engineering uses include real-time digital filtering, automatic gain control, correlation, waveform generation, adaptive signal processing, and fixed-point control calculations. The 64-pin DIP format favors laboratory instruments, legacy industrial controllers, educational platforms, and prototype systems where through-hole assembly and direct component substitution are convenient. Surface-mount production designs should verify whether the same function is available in a newer package or in a consolidated DSP device. A key design consideration is interface timing. The host processor, bus, and downstream circuitry must be matched to the multiplier's input-output timing, clocking method, and product-format requirements. Because the supplied records do not expose the complete pinout, timing tables, and logic diagrams, engineers should not infer pin assignments from the 64-pin count. The verified Rochester Electronics listing prices the original packaged part from $204.85 at unit quantity as of 2026-10-29, making availability and lifecycle confirmation important for new production. This page consolidates the verified product classification, package information, distributor pricing, source links, and engineering caveats into one reference. It also distinguishes confirmed facts from parameters that remain unavailable, helping teams evaluate sourcing, legacy-board maintenance, and replacement planning without turning incomplete distributor snippets into unsupported technical claims.

RFQ Contact
ADSP-1016AKG - 16-Bit DSP Multiplier | Analog Devices
ADSP-1016AKG

ADSP-1016AKG - 16-Bit DSP Multiplier | Analog Devices

The Analog Devices ADSP-1016AKG is a 16-bit DSP multiplier and peripheral integrated circuit packaged in a hermetically sealed 68-pin ceramic PGA package. The verified product information identifies the device as a DSP peripheral with multiplier functionality, a commercial temperature grade, a square package, and a 68-terminal pin-and-peg terminal form. These details position the ADSP-1016AKG for legacy digital signal processing systems requiring dedicated multiplication performance rather than a general-purpose microcontroller or FPGA implementation. A digital signal processor, or DSP, is a specialized semiconductor architecture optimized for numerical operations used in filtering, modulation, demodulation, waveform generation, and other real-time signal-processing tasks. The ADSP-1016AKG belongs to the broader DSP peripheral category and provides a multiplier-focused function that can reduce processor overhead when multiplying is the dominant operation in a signal chain. Its ceramic PGA package is intended for applications where environmental robustness and package-level reliability are more important than a small plastic footprint. The verified specifications identify the device as a 16-bit DSP multiplier. The package is described as CPGA68, hermetically sealed, and PGA-68, with an approximate package body size of 27.89 mm by 27.89 mm. Commercial temperature-grade sourcing information is available from distributors, and current distributor listings provide pricing and availability information for the ADSP-1016AKG. The available web data does not provide clock frequency, power dissipation, supply voltage, accuracy, memory interface, or detailed electrical timing values, so those specifications are intentionally left as data-needed entries. Typical legacy signal-processing uses include audio filtering, communications modulation, industrial control mathematics, and instrumentation signal conditioning. Because the available information does not describe the external bus architecture, control registers, or application-specific reference circuits, final system design should begin with the manufacturer datasheet and verify the complete electrical and pin-level requirements before PCB layout. The primary design consideration is package planning. A 68-pin ceramic PGA package cannot be replaced by a surface-mount QFN or BGA footprint, and its thermal and mechanical requirements differ from plastic leaded packages. The ADSP-1016AKG should therefore be treated as a specialized legacy component, with procurement and design decisions based on verified availability rather than assumed modern equivalents. This page combines distributor pricing, package information, application guidance, and a careful comparison of the available sourcing evidence.

RFQ Contact
ADSP-1016AKN - 16x16 CMOS Multiplier | Analog Devices
ADSP-1016AKN

ADSP-1016AKN - 16x16 CMOS Multiplier | Analog Devices

The Analog Devices ADSP-1016AKN is a 16 x 16 CMOS digital multiplier in a 64-pin plastic PDIP package. It is designed as a DSP peripheral for digital multiplication operations, and the verified product listings classify it as a commercial-grade, through-hole CMOS multiplier. The device combines a 16-bit multiplier function with a 64-terminal rectangular DIP package for direct insertion into PCB sockets or through-hole assembly. A digital multiplier is a specialized arithmetic circuit that multiplies two binary operands and produces a wider numerical result. In the product hierarchy, the ADSP-1016AKN is a digital signal processing peripheral and arithmetic logic element rather than a general-purpose microcontroller. Its fixed 16 x 16 architecture is useful when a system needs dedicated multiplication throughput without implementing a complete DSP or processor. The verified listings identify the ADSP-1016AKN as a 16-bit DSP multiplier with a 64-PDIP package. Commercial temperature grade, through-hole construction, and rectangular DIP form factor are explicitly listed. Other detailed electrical characteristics, including clock frequency, supply voltage, multiplier accuracy, propagation delay, input logic levels, and output timing, were not included in the supplied source data and therefore require confirmation from the manufacturer datasheet before design release. Its CMOS construction belongs to the same broad digital arithmetic category as other dedicated multiplier and divider ICs, but it does not replace an analog multiplier or a software-defined arithmetic operation. The part provides a hardware function intended to reduce multiplier workload in signal-processing equipment. Because the available data confirms the multiplier width and physical package but does not define timing or accuracy limits, system timing closure must use the official ADSP-1016 data sheet rather than distributor catalog labels. Typical application areas include digital signal processing, fixed-point multiplication, communications processing, industrial control, and embedded arithmetic subsystems. Related catalog entries include the ADSP-3212JG and ADSP-3211JG DSP multipliers and the AD632SH analog multiplier, although each related device must be evaluated independently for electrical and pin compatibility. The ADSP-1016AKN itself is most appropriate when an existing 64-pin PDIP footprint and a dedicated 16 x 16 CMOS multiplier are required. The principal design consideration is the need to verify logic thresholds, timing, supply requirements, and unused-pin treatment from the official manufacturer documentation. Because only a package-level pinout was not supplied in the verified results, engineers should not assign signals to the 64 terminals without reviewing the datasheet pin description and ensuring that all control, clock, data, and output terminals are terminated correctly. This page consolidates verified distributor pricing, package information, compliance observations, related-device references, and practical selection guidance. It also separates confirmed ADSP-1016AKN attributes from unavailable electrical parameters, making the resulting component record suitable for initial sourcing while preserving the traceability required before schematic sign-off.

RFQ Contact
ADSP-1080AJD - 8-Bit CMOS DSP Multiplier | Analog Devices
ADSP-1080AJD

ADSP-1080AJD - 8-Bit CMOS DSP Multiplier | Analog Devices

The Analog Devices ADSP-1080AJD is an 8-bit CMOS digital multiplier and DSP peripheral packaged in a hermetically sealed, side-brazed 40-pin ceramic DIP. The device supports an 8 x 8 CMOS multiplier configuration and is identified as a commercial-temperature-grade DSP peripheral. Its 40-CDIP package measures 0.600 inches, or 15.24 mm, across the package width and uses through-hole terminals for PCB mounting. A DSP multiplier is a specialized arithmetic semiconductor that performs binary multiplication as a dedicated hardware operation. Positioned within the hierarchy of digital signal processing components, multipliers, DSP processors, and embedded signal-processing systems, this device provides a functional building block for filtering, scaling, modulation, and other fixed-point arithmetic workflows. Unlike a general-purpose microprocessor, a dedicated multiplier implements its arithmetic operation directly in parallel hardware. The ADSP-1080AJD provides 8-bit data resolution, 8 x 8 CMOS multiplication, 40 terminals, and a rectangular through-hole package. Its ceramic construction is identified as hermetically sealed and side-brazed, making the package mechanically distinct from the plastic PDIP versions referenced in the cross-reference results. The commercial temperature grade and DIP footprint favor laboratory equipment, legacy industrial equipment, educational systems, and maintenance applications designed around through-hole components. Verified listings characterize the ADSP-1080AJD as a DSP peripheral, analog multiplier/divider, CMOS multiplier, and unclassified integrated circuit. These descriptions identify the component's arithmetic function and device category but do not provide verified clock frequency, propagation delay, input impedance, power dissipation, supply-voltage limits, operating-temperature range, or electrical timing values. Those parameters must therefore be confirmed in the manufacturer datasheet before a new high-performance design is released. Typical applications include fixed-point digital filtering, signal scaling, modulation and demodulation support, waveform-generation arithmetic, communications signal conditioning, and educational DSP experiments. Because the device is offered in a 40-pin ceramic DIP, it is especially practical for prototyping systems that cannot directly accept modern fine-pitch surface-mount packages. Legacy control and test systems can also use the same arithmetic peripheral where the original ADSP-1080 architecture was already supported. The primary design consideration is package and lifecycle validation. The verified ADSP-1080AJN and ADSP-1080AKN references use PDIP40 packages rather than the target's hermetically sealed 40-CDIP package, so they must not be assumed to be drop-in replacements without mechanical qualification. Confirm pin functions, logic levels, timing, supply requirements, and environmental limits against the original ADSP-1080 documentation before substitution. This page consolidates verified distributor pricing, package information, technical classifications, and cross-reference findings with explicit uncertainty markers. It also distinguishes true same-package drop-in options from near-function parts in different packages, helping engineers avoid selecting a replacement that requires PCB or mechanical changes.

RFQ Contact
ADSP-1080AJN - 8-Bit CMOS DSP Multiplier | Analog Devices
ADSP-1080AJN

ADSP-1080AJN - 8-Bit CMOS DSP Multiplier | Analog Devices

The Analog Devices ADSP-1080AJN is an 8-bit CMOS digital signal processor multiplier in a 40-pin PDIP package, providing an 8 x 8 multiplication function for digital signal processing and DSP peripheral designs. The device is identified in the verified source data as an 8-bit CMOS multiplier, a DSP peripheral, and a commercial-grade through-hole component. A DSP multiplier is a specialized digital arithmetic circuit that computes the product of two binary numbers. It belongs to the digital signal processing multiplier hierarchy, where it operates as a dedicated arithmetic accelerator rather than a general-purpose microprocessor. Such multipliers can implement convolution, correlation, scaling, FIR-filter coefficient processing, and mixed-signal control calculations when combined with external adders, registers, memory, and interface logic. The ADSP-1080AJN provides 8-bit multiplier capability and 8 x 8 multiplication in a 40-pin PDIP package. Its through-hole terminal arrangement supports conventional PCB sockets and prototype boards, while the plastic PDIP40 package provides a 0.600-inch, 15.24 mm lead pitch according to the Rochester Electronics product listing. The commercial temperature grade, CMOS construction, and through-hole termination identify the part as a legacy DIP-era DSP building block. Because the supplied web evidence identifies the device under Analog Multipliers and Dividers as well as DSP Peripheral, it is suitable for signal-chain arithmetic, digital filtering, and DSP subsystem designs where an external processor requires a dedicated multiplication path. The DIP package also makes the component practical for educational DSP platforms, laboratory instrumentation, and maintenance of older equipment, although modern mixed-signal and FPGA designs generally favor newer, smaller, mixed-signal and FPGA designs generally favor newer, smaller, higher-speed devices. Engineers should preserve the original supply configuration because DIP packages, inter-pitch, and older Ceramic DIP package outlines remain difficult to source in volume. Rochester Electronics lists the ADSP-1080AJN as original manufacturer-standard stock, with pricing beginning at $121.88 per unit as of October 29, 2026. Availability, operating-temperature limits, supply voltage, clock rate, and individual pin functions were not included in the supplied data and must be confirmed against the manufacturer datasheet before design release. The key design consideration is that a multiplier alone does not create a complete digital filter. Clocking, output registers, truncation behavior, propagation delay, and interface logic must be evaluated in the wider DSP architecture. This page combines verified package and pricing information, available same-family alternatives, and practical sourcing guidance for engineers maintaining legacy DSP systems rather than reproducing unverified timing or electrical limits.

RFQ Contact
ADSP-1080AKD/+ - 8x8 CMOS Multiplier | Analog Devices
ADSP-1080AKD/+

ADSP-1080AKD/+ - 8x8 CMOS Multiplier | Analog Devices

Analog Devices ADSP-1080AKD/+ is an 8 x 8 CMOS analog multiplier with a 40-terminal ceramic dual-inline package (CDIP-40). The multiplier is categorized as a DSP peripheral and analog multiplier/divider, combining an 8-bit by 8-bit multiplication function with through-hole, 40-pin packaging. It is specified for commercial-temperature applications and is supplied in a rectangular CDIP package. An analog multiplier is a signal-processing semiconductor that multiplies two analog input signals and produces an output proportional to their product. It belongs to the broader analog multiplier and divider hierarchy, which is part of linear and analog signal processing. In digital signal processing and DSP peripheral systems, this multiplication function supports products such as modulation, waveform generation, automatic gain control, correlation, analog signal conditioning, and mixed-signal calculations. The ADSP-1080AKD/+ provides an 8-bit multiplier architecture using CMOS technology. The available verified product information identifies the device as an 8 x 8 CMOS multiplier, while distributor records classify it as a DSP peripheral multiplier within the analog multiplier/divider category. Its commercial temperature grade and 40-terminal through-hole format are also explicitly identified in the supplied records. The CDIP-40 package provides a conventional 40-pin dual-inline footprint suitable for through-hole assembly, prototype boards, legacy industrial equipment, and systems designed around the DIP form factor. Because the verified results do not expose the complete electrical tables, power ratings, gain accuracy, bandwidth, input range, output range, or power consumption, those parameters should be confirmed in the Analog Devices ADSP-1080AKD datasheet before a new high-accuracy design is released. Typical implementation opportunities include laboratory multiplier circuits, DSP accelerator boards, modulation and demodulation blocks, educational analog-computing systems, and replacement of an original 40-pin CMOS multiplier in legacy equipment. The product is most appropriate when an 8 x 8 multiplication function and a DIP-compatible mechanical format are more important than modern surface-mount integration or very low power consumption. Designers should verify the complete pin assignment, supply voltage, input and output signal limits, settling behavior, and timing characteristics against the manufacturer datasheet before substitution. The available verified records also report RoHS non-compliance, so this component may require a controlled legacy-supply or exemption strategy in newer RoHS-scoped products. Procurement should use traceable authorized channels and confirm the exact suffix and ceramic package construction. This page combines verified package, architecture, temperature-grade, pricing, and sourcing information with clearly identified engineering gaps, drop-in candidate evaluation, comparison parameters, and practical legacy replacement guidance. It separates confirmed distributor facts from values that still require datasheet verification, supporting faster engineering review without presenting missing electrical characteristics as facts.

RFQ Contact
ADSP-1080AKN - 8-Bit CMOS DSP Multiplier | Analog Devices
ADSP-1080AKN

ADSP-1080AKN - 8-Bit CMOS DSP Multiplier | Analog Devices

Analog Devices ADSP-1080AKN is an 8-bit CMOS DSP multiplier packaged as a 40-pin plastic dual inline package (PDIP40). The through-hole device is classified as a DSP peripheral and analog multiplier/divider, with a commercial temperature grade and a rectangular package form. Its verified distributor listing is available in stock, while a separate distributor identifies the ADSP-1080 family as obsolete. An 8-bit DSP multiplier is a specialized arithmetic block that multiplies two 8-bit operands and produces a wider numerical result. This makes the ADSP-1080AKN part of the broader DSP peripheral hierarchy, where multiplication and division support signal-processing, filtering, scaling, and other fixed-point arithmetic functions. Its legacy PDIP40 package favors through-hole construction and applications in older or long-lifecycle electronic systems rather than compact surface-mount products. The ADSP-1080AKN combines an 8-bit multiplier with CMOS technology in a 40-pin PDIP40 package. The supplied product records identify it as a DSP peripheral with through-hole terminals and a rectangular package shape. A distributor price of $24.94 is available as of 2026-10-30. Its commercial temperature grade distinguishes it from military- and industrial-temperature versions of the same family. The through-hole PDIP40 construction provides 40 physical connection points and suits legacy controller, signal-processing, and instrumentation boards. CMOS implementation is specifically identified in the verified product records. No verified timing frequency, supply voltage, accuracy, multiplier propagation delay, power dissipation, or operating-temperature values were supplied, so those electrical parameters remain unknown rather than being estimated. Typical engineering uses include 8-bit digital signal-multiplication stages, embedded arithmetic interfaces, educational DSP platforms, and maintenance of legacy equipment. In these contexts, the ADSP-1080AKN serves as a dedicated arithmetic peripheral rather than a general-purpose microprocessor. System designers should verify the complete datasheet signal definitions, supply requirements, and timing behavior before creating a new production design. A key design consideration is availability and lifecycle risk. Although the Dasenic listing describes ADSP-1080AKN as in stock, Rochester Electronics is the source of the verified marketplace entry, and the family is identified as obsolete. New deployments should therefore confirm authorized sourcing, traceability, and long-term supply, while existing installations should avoid schematic or footprint changes unless the replacement is independently qualified. This page combines verified distributor availability, package information, pricing, lifecycle evidence, and a qualified same-family comparison with practical sourcing guidance. It distinguishes documented facts from missing technical data and avoids treating general cross-reference search results as proof of pin-to-pin replacement without package-level verification.

RFQ Contact
ADSP-1081AJD - 8x8 CMOS Multiplier | Analog Devices
ADSP-1081AJD

ADSP-1081AJD - 8x8 CMOS Multiplier | Analog Devices

The Analog Devices ADSP-1081AJD is an 8 x 8 CMOS digital multiplier and DSP peripheral designed for precision multiplication operations. The device is offered in a hermetically sealed, side-brazed, ceramic 40-pin DIP package and uses through-hole terminals. Its rectangular CDIP-40 construction supports applications that require a durable, temperature-controlled implementation in laboratory, industrial, aerospace, and instrumentation equipment. A digital multiplier is a specialized arithmetic IC that multiplies two binary numbers and produces a wider product word. In the product taxonomy, the ADSP-1081AJD belongs to the DSP and arithmetic-processing hierarchy rather than the general-purpose microprocessor category. This distinction matters because a fixed-function multiplier can execute a tightly defined arithmetic operation without the memory, instruction sequencing, and software overhead of a general-purpose digital signal processor. The verified product information identifies the ADSP-1081AJD as an 8 x 8 CMOS multiplier with a 40-terminal, through-hole CDIP package. Commercial temperature grade is reported by the product listing. The ceramic side-brazed construction also distinguishes it from plastic DIP devices, providing a package option commonly considered when environmental robustness, thermal behavior, or long service life is important. Detailed electrical limits are not available in the supplied verified dataset and must be confirmed from the manufacturer datasheet before design release. Internally, an 8 x 8 multiplier can accept two 8-bit operands and generate a 16-bit product. This arithmetic width makes the component useful in fixed-point signal-processing chains, control calculations, test systems, scaling operations, and custom digital signal conditioning. Because the ADSP-1081AJD is a dedicated DSP peripheral rather than a programmable processor, it can provide a compact functional block when the surrounding system already handles sequencing and control. Potential uses include real-time signal scaling, automatic-range conversion, analog front-end compensation, industrial process measurement, communications-channel equalization, and precision test equipment. In these systems, the multiplier can implement products such as gain-and-signal terms, correlation-related terms, or coordinate transformations. System-level accuracy still depends on the input and output word definitions, arithmetic sign convention, pipeline requirements, and whether additional rounding or saturation logic is required. The primary design consideration is that a CDIP-40 package requires through-hole PCB accommodation and careful mechanical clearance. Designers should preserve the manufacturer's recommended pin orientation, verify the full electrical specification and timing limits, and provide suitable bypassing around the device. This page distinguishes verified facts from unavailable parameters so that obsolete or legacy designs can be reviewed without confusing package information with unverified electrical claims. This product record combines the supplied distributor and marketplace information, package attributes, pricing context, application guidance, and strict source tracking. It highlights which engineering data remains unavailable and avoids presenting unverified electrical specifications as confirmed manufacturer limits.

RFQ Contact