Products (44,000+)

Z8674312PSC - 8-Bit 12MHz Z8 Microcontroller | Zilog
Z8674312PSC

Z8674312PSC - 8-Bit 12MHz Z8 Microcontroller | Zilog

The Zilog Z8674312PSC is an 8-bit CMOS Z8 microcontroller with a 12 MHz maximum clock, 8 KB of one-time-programmable ROM, 236 bytes of data RAM, and 32 general-purpose I/O pins. The device is packaged in a 40-pin through-hole dual in-line package and operates from a 4.75 V to 5.25 V supply, making it suitable for legacy control, instrumentation, appliance, and industrial automation systems. A microcontroller is a compact integrated circuit that combines a CPU core, program memory, data memory, and peripheral functions into one device. The Z8 belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and semiconductor categories. Compared with field-programmable devices, the one-time-programmable architecture allows the application program to be written once during manufacturing, reducing the need for external program storage in cost-sensitive embedded products. Key device characteristics include the Z8 8-bit core, a 12 MHz maximum operating frequency, 8 KB organized as 8K x 8 OTP memory, 236 bytes of data RAM, and 32 I/O pins. External Bus Interface and External Memory Interface connectivity expand the available peripheral options for displays, memory devices, and external I/O. The device includes no ADC, so analog measurement requires an external converter or dedicated front-end circuit. The CMOS Z8 architecture is suited to embedded control loops that combine timed switching, digital sensing, and actuator control. Its 32 I/O pins provide substantial board-level flexibility for keyboards, indicators, relays, and discrete logic. The 4.75 V to 5.25 V operating range is typical of established 5 V control platforms, although designers should verify timing and output levels against the complete system requirement rather than assume modern 3.3 V compatibility. Typical uses include appliance controllers, industrial sequencers, test equipment, HVAC control panels, motor-control support circuits, and embedded peripheral boards. The 40-DIP package is particularly useful for prototype construction, repair work, and through-hole assembly where a socketed microcontroller allows straightforward replacement. Designers should confirm the complete 40-pin signal assignment, oscillator connection, reset configuration, and programming procedure from the manufacturer datasheet before layout. Because the ROM is one-time programmable, the finished program image should be fully validated before the production programming step; a single incorrect write cannot be corrected in the field. This product page consolidates the verified core specifications, package details, purchasing guidance, application guidance, and engineering considerations for engineers assessing the Z8674312PSC in legacy embedded designs.

RFQ Contact
Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z8674312PSG

Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z8674312PSG is an 8-bit Z8 Z86-family microcontroller with 8 KB of one-time-programmable program memory, 236 x 8 bytes of RAM, a 12 MHz maximum operating frequency, and 32 general-purpose I/O pins in a 40-pin PDIP package. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. The Z8674312PSG belongs to the Z8 microcontrollers family within the broader embedded-controller and semiconductor hierarchy. Its OTP program memory permits a finished device to be programmed once, making it suitable for cost-sensitive products that do not require in-circuit firmware updates. The principal device characteristics include an 8 KB (8K x 8) OTP program-memory capacity, 236 x 8 bytes of RAM, and a maximum clock frequency of 12 MHz. The device provides 32 general-purpose I/O pins, a Z8 processor core, EBI/EMI connectivity, power-on reset, and a watchdog timer. These features provide a practical combination of control logic, data storage, and peripheral integration for embedded products. The 12 MHz operating limit should be treated as the timing ceiling for the complete design, including clock tolerance, peripheral timing, and interrupt-service requirements. Its 8 KB OTP memory is suitable for compact control firmware, but memory utilization must be checked after including the startup code, drivers, interrupt routines, and application logic. The 236-byte RAM area also requires attention when buffering data or maintaining multiple task stacks. Typical uses include appliance controllers, small industrial control modules, building equipment, instrumentation, simple human-interface panels, and embedded automation products. For a new design, engineers should confirm oscillator requirements, available I/O, memory consumption, timing margins, and interrupt behavior against the complete Zilog datasheet before committing the 40-pin footprint. The main design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware validation must therefore occur before final programming, while power, ground, and decoupling layout must follow the electrical requirements published for this device family. This page consolidates verified distributor specifications, procurement details, package information, application guidance, and design cautions into a compact engineering reference that helps distinguish this Z8 microcontroller from broader embedded processor families.

RFQ Contact
Z8674312VSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Z8674312VSC

Z8674312VSC - 8-Bit 12MHz OTP Microcontroller | Zilog

The Zilog Z8674312VSC is an 8-bit Z8-family microcontroller with a 12 MHz maximum clock frequency, 8 KB of one-time-programmable program memory, and 236 bytes of RAM. It is packaged in a 44-pin PLCC with J-leads and is specified for commercial-temperature operation from 0°C to 70°C. The device includes power-on reset and watchdog-timer functions identified in its technical listing. A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The Z8 MCU family belongs to the broader hierarchy of embedded processors, embedded controllers, and integrated circuits. It is intended for applications that require compact embedded control, event monitoring, digital input handling, and deterministic peripheral control without a separate external processor. The Z8674312VSC combines 8,192 bytes of OTP program memory with a 12 MHz operating frequency and 32 I/O lines. OTP memory permits a programmed device to be finalized for production, while the Z8 core provides the central processing logic for embedded control sequences. Its 236 bytes of RAM provide working storage for variables, status information, and short-term data handling. The listed package provides 44 physical terminals around a square PLCC body. As an embedded controller, the Z8 core executes firmware from program memory and uses its on-chip peripherals to interact with external circuitry. The power-on reset function supports defined initialization after supply application, while the watchdog timer helps recover operation if firmware stops servicing the timer as intended. The operating range of 0°C to 70°C identifies the target as a commercial-temperature grade rather than an automotive or extended-temperature grade. Typical uses include industrial control panels, embedded instrumentation, simple sequencers, appliance controllers, status and alarm panels, and compact automation modules. The 32 I/O lines are useful for digital interfaces, pushbutton inputs, indicator outputs, and external control signals. Designers should verify clock timing, peripheral assignments, programming procedures, and electrical limits in the manufacturer documentation before creating a production design. The 44-pin PLCC footprint requires careful PCB layout and a compatible socket or land pattern. Layout should preserve access to programming and test functions, provide stable supply bypassing near the device, and route sensitive timing or signal paths away from noisy switching nodes. Because the OTP program memory cannot be electrically rewritten, firmware validation must occur before the programmed configuration is finalized. This product summary combines processor architecture, memory organization, package details, lifecycle information, and application guidance for engineers assessing an embedded-control design. It also distinguishes the exact PLCC ordering code from related package variants and focuses replacement decisions on footprint, pin compatibility, memory, clock, and thermal requirements.

RFQ Contact
Z8674312VSG - 8-Bit 12MHz Z8 Microcontroller | Zilog
Z8674312VSG

Z8674312VSG - 8-Bit 12MHz Z8 Microcontroller | Zilog

The Zilog Z8674312VSG is an 8-bit Z8 CISC microcontroller operating at up to 12 MHz, with 8 KB (8K x 8) of one-time-programmable program memory and 236 x 8 bytes of RAM in a 44-pin PLCC J-lead package. It provides 32 general-purpose I/O pins and integrates power-on reset, a watchdog timer, and EBI/EMI connectivity. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. The Z8 belongs to the 8-bit microcontroller hierarchy and combines a compact instruction set with dedicated serial, timing, and external-bus interfaces. It is intended for embedded control systems where deterministic peripheral access and flexible one-time-programmable configuration are more important than high processor throughput or large memory capacity. The Z8674312VSG's principal features include a 12 MHz maximum operating frequency, 8 KB of OTP program memory, 236 bytes of RAM, 32 general-purpose I/O pins, power-on reset, and a watchdog timer. The EBI/EMI interface expands connectivity to external memory and peripheral devices, while the OTP architecture supports permanent firmware configuration in cost-sensitive control products. Its 44-pin PLCC package provides a leaded, socket-compatible mounting option. Internally, the device uses the Z8 8-bit CISC architecture, providing direct access to I/O and onboard peripherals while executing compact embedded-control firmware. The 236-byte RAM supports protocol state, counters, buffers, and control variables without requiring external memory in many designs. EBI/EMI support allows the controller to work with external resources when a design needs more data storage, specialized peripherals, or additional bus-connected devices. Typical applications include industrial control panels, appliance controllers, keyboard and human-interface modules, programmable logic controllers, instrumentation interfaces, and compact embedded systems requiring permanent program storage. The 32 I/O pins are particularly useful for digital control, status indication, switch sensing, and communication functions, while the external bus interface supports more complex system architectures. Designers should confirm clock, power, timing, and interrupt requirements against the manufacturer datasheet and verify the complete 44-pin PLCC pin assignment before layout. The OTP program memory should be treated as write-once, making production firmware validation especially important. Board designs should provide the required bypass capacitors, a stable clock source, and appropriate signal-conditioning or termination for externally connected buses. This page consolidates the exact Z8674312VSG identity, package information, memory capacity, peripheral functions, sourcing guidance, and engineering design considerations into one reference. It also distinguishes verified device attributes from values that still require confirmation during schematic and PCB development.

RFQ Contact
Z86C9012ASG - 12MHz ROMless 8-bit MCU | Zilog
Z86C9012ASG

Z86C9012ASG - 12MHz ROMless 8-bit MCU | Zilog

The Zilog Z86C9012ASG is a 12 MHz ROMless C40 8-bit microcontroller with 32 I/O lines, 236 bytes of RAM, and a 44-pin LQFP package. It operates from 3.0 V to 5.5 V and includes two 8-bit timers, six interrupts, a watchdog timer, power-on reset, low-voltage protection, and two analog comparators. An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, timers, and peripheral functions on one device. The Z86C9012ASG belongs to the broader Z8 family and the Z86C90 series of embedded controllers. Its ROMless architecture means application code is loaded from external program memory, making the device suitable for systems where firmware size, update requirements, or program-memory organization must be controlled by the designer. The device provides 32 I/O lines across a 44-pin package, leaving additional pins for power, clock, reset, programming, and other platform functions. Its two 8-bit timers support periodic events, timing, counting, and basic control functions. Six interrupt sources, an active watchdog timer, power-on reset, and low-voltage protection improve the suitability of the controller for embedded equipment that must continue operating predictably through normal control tasks and electrical disturbances. The 12 MHz operating speed provides a useful balance between processing capability, power consumption, and external-memory access in a compact embedded design. The C40 architecture is designed for 8-bit control applications and works with external program storage. Because no internal ROM is listed for this variant, the board design must include the appropriate external memory interface and a valid firmware-loading arrangement. Typical uses include appliance controllers, small industrial control modules, instrumentation interfaces, keypad and display products, and embedded products requiring timers, interrupt-driven I/O, and analog comparison functions. The two analog comparators can support threshold detection, while the general-purpose I/O can operate discrete switches, indicator circuits, and digital sensors. A key design consideration is the relationship between external memory access, clock configuration, and the device's 3.0 V to 5.5 V operating range. Board layout should keep memory-bus traces short and provide suitable decoupling at the supply pins. Firmware must also configure the watchdog and interrupt priorities so that normal peripheral servicing cannot be interrupted indefinitely. This page consolidates the Z86C9012ASG's key architectural ratings, package information, application guidance, and design considerations into one engineering-focused reference. It also distinguishes documented characteristics from parameters that require confirmation from the manufacturer datasheet before layout or production release.

RFQ Contact
Z86C9012FSC - 12MHz 8-Bit ROMless MCU | Zilog
Z86C9012FSC

Z86C9012FSC - 12MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9012FSC is an 8-bit Z8 ROMless microcontroller operating at 12 MHz in a 44-pin LQFP package measuring 10 mm by 10 mm. Its key characteristics include an 8-bit CPU core, ROMless architecture, commercial temperature grade, 5 V supply, and EBI/EMI connectivity support. The device is designed for embedded control systems that require external program and data memory while using a compact surface-mount package. A ROMless microcontroller is a semiconductor that contains the processor core and peripheral functions but requires external memory for application code and data. Within the embedded-control hierarchy, the Z86C9012FSC belongs to the 8-bit microcontroller class, combines an 8-bit CPU with external bus interfaces, and serves as the central control component in industrial, commercial, and instrumentation equipment. Unlike a device with embedded program memory, it allows firmware capacity to scale with an external memory device. The Z86C9012FSC operates at 12 MHz and is identified as an 8-bit ROMless MCU. Its 44-LQFP surface-mount package provides 44 external terminals and a 10 mm by 10 mm footprint. EBI/EMI connectivity expands the available external data-bus and memory-oriented interfaces, while the 5 V operating supply supports conventional industrial-control voltage levels. The commercial temperature designation makes the device appropriate for equipment operating within commercial environmental conditions. The Z8 CPU provides an 8-bit processing architecture suited to control loops, digital interfaces, and sequential logic rather than high-throughput computing. Because program storage is external, firmware deployment depends on the selected external memory device, bus configuration, and memory-map design. This separation can make board storage capacity independent of the MCU package and can support field-update architectures when the external memory interface is suitable. Typical uses include industrial controllers, instrument panels, keypad interfaces, embedded motor and process controls, and legacy peripheral-control systems. The 12 MHz operating rate supports deterministic tasks requiring regular sampling, protocol handling, and state-machine updates. EBI/EMI connectivity is particularly relevant to systems that need external code storage, data memory, or bus-connected peripherals. During schematic capture, treat the external memory bus and programming interface as central design areas. Preserve the manufacturer's recommended decoupling, oscillator, reset, and memory-bus routing, and verify all signal timing and drive requirements against the manufacturer datasheet. The ROMless architecture also requires a complete firmware and external-memory design before the circuit can operate as a standalone controller.

RFQ Contact
Z86C9012PEC - 8-Bit 12MHz ROMless MCU | ZiLOG
Z86C9012PEC

Z86C9012PEC - 8-Bit 12MHz ROMless MCU | ZiLOG

The ZiLOG Z86C9012PEC is an 8-bit Z8 ROMless microcontroller operating at 12 MHz and supplied in a 40-pin through-hole DIP package. The C40 marking identifies the device variant, while the PEC suffix denotes the industrial-temperature, plastic-DIP configuration used in legacy control and instrumentation equipment. A ROMless microcontroller is an application-specific controller that executes firmware from external program memory. In the Z86C9012PEC, the absence of embedded program ROM allows the system designer to select the memory size and organization that match the application. External address and data buses connect the controller to program memory, data memory, and peripheral devices. This architecture differs from a mask-programmable or ROM-based MCU because the firmware remains field-updateable when the external memory supports programming. The principal operating characteristics include an 8-bit CPU architecture, a 12 MHz clock rating, ROMless operation, and a 40-terminal industrial through-hole package. The through-hole DIP footprint supports conventional through-hole assembly and socketed legacy designs, while the four-side rectangular package leaves ample board pitch for hand soldering and inspection. Clock timing, peripheral resources, port counts, memory interfaces, voltage limits, and reset behavior should be confirmed from the Zilog datasheet before schematic or firmware sign-off. The Z86C9012PEC is suited to industrial controllers, instrumentation panels, motor sequencing modules, legacy peripheral controllers, and embedded products that retain a DIP footprint from an earlier design. An external program-memory device is required because this controller provides no internal ROM. Designers should also allow for address decoding, bus timing, decoupling, and supply-voltage sequencing when replacing a previously programmed MCU. A DIP package offers mechanical compatibility with established PCB layouts, but it occupies more board area than a modern surface-mount controller. New compact designs may prefer a smaller microcontroller; however, changing architecture also requires port remapping, firmware revision, and external-bus revalidation. For repair and lifecycle-extension applications, preserving the exact footprint can eliminate unnecessary board redesign. This page combines the confirmed device identity, package information, operating frequency, and lifecycle-relevant sourcing guidance with practical migration and assembly notes. Use the manufacturer pin-description table and electrical characteristics for final design decisions, especially when external memory timing or absolute maximum ratings determine board reliability.

RFQ Contact
Z86C9012PEG - 8-Bit 12MHz ROMless MCU | Zilog
Z86C9012PEG

Z86C9012PEG - 8-Bit 12MHz ROMless MCU | Zilog

The Zilog Z86C9012PEG is an 8-bit Z8 ROMless microcontroller operating at 12 MHz with a 3 V to 5.5 V supply range, 32 I/O ports, and a 40-pin dual-inline package. It is designed for embedded control applications that require external program and data memory while providing a conventional 8-bit processor architecture, parallel digital I/O, and compact through-hole integration. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a defined instruction set and operates on byte-sized data. The Z8 family belongs to the broader embedded-controller hierarchy: ROMless microcontroller → 8-bit microcontroller → embedded processing IC → semiconductor. ROMless architecture allows application firmware and working data to be placed in external memory, making the controller suitable when code size, memory upgrades, or separate storage requirements must be controlled by the system designer. The Z86C9012PEG combines a 12 MHz clock with 32 I/O ports in a 40-pin DIP package. Its operating supply range of 3 V to 5.5 V supports both 3.3 V and 5 V system designs when the external memory, peripherals, and I/O levels are compatible. The external-memory architecture provides implementation flexibility, while the parallel I/O count supports digital control, data acquisition, display interfaces, and communication peripherals. Because the device is ROMless, a complete system requires suitable external program memory and the associated address, data, and control connections. The 12 MHz operating frequency provides the timing reference for instruction execution and peripheral interfacing. As with other 8-bit controllers, the practical clock rate, code timing, and bus performance depend on the external memory implementation, bus timing, and firmware rather than on internal program storage alone. Typical uses include industrial control panels, building automation modules, instrumentation interfaces, motor-control logic, programmable timers, and legacy embedded systems being refreshed without changing an existing 40-pin PCB footprint. The DIP format is particularly useful for through-hole industrial equipment, prototypes, repair assemblies, and designs assembled in small or medium production volumes. The primary design consideration is compatibility with the existing controller ecosystem. Confirm pin assignments, external-memory requirements, reset behavior, oscillator connections, supply levels, and peripheral compatibility before replacing another device. Use the Zilog datasheet and pin-description table as the authority for PCB routing, and validate timing with the intended external memory and crystal or clock source. This product page consolidates the confirmed Z86C9012PEG specifications, package characteristics, sourcing information, and practical integration guidance. It also distinguishes confirmed attributes from details that require datasheet verification, helping engineers assess fit for an embedded-control redesign or legacy-system maintenance.

RFQ Contact
Z86C9012PSC - 8-Bit 12MHz ROMless Z8 MCU | Zilog
Z86C9012PSC

Z86C9012PSC - 8-Bit 12MHz ROMless Z8 MCU | Zilog

The Zilog Z86C9012PSC is an 8-bit, 12 MHz ROMless Z8 Consumer Controller Processor microcontroller supplied in a 40-pin DIP package. It belongs to the Z86C90/C89 CCP family and provides 236 bytes of general-purpose RAM, CMOS-compatible interfacing, and external memory support for code flexibility. A ROMless microcontroller is designed to execute application code from external memory rather than from internal program ROM. This architecture separates the fixed control logic from the application program, allowing firmware capacity and code updates to be handled by external devices. The Z86C9012PSC therefore suits controllers whose program storage requirements are established separately from the microcontroller choice. The Z86C9012PSC operates as an 8-bit CMOS microcontroller with a maximum clock rate of 12 MHz. Its 236 bytes of internal general-purpose RAM support variables, working registers, stack operations, and short-lived control data. The external-memory interface is the defining architectural feature for designs that need configurable code storage, external program execution, or a separation between firmware volume and controller silicon. The Z86C9012PSC is packaged in a 40-pin DIP, a through-hole format that is well suited to legacy industrial equipment, controller boards, prototypes, and repair assemblies. Because it is a ROMless part, the board design must provide the external program-memory interface, address decoding, and required memory circuitry rather than relying on internal ROM. Typical applications include dedicated appliance controllers, industrial control panels, motor-sequence controllers, keyboard and human-interface controllers, embedded control modules, and legacy Z8-based products being maintained or refreshed without changing the 40-pin DIP footprint. The DIP format also makes the device practical for socketed assemblies and boards where through-hole insertion is preferred over fine-pitch surface-mount assembly. When designing around this controller, confirm the external memory interface, reset behavior, available port resources, and clock requirements against the manufacturer datasheet. The device also requires a regulated supply and appropriate decoupling. Because the package is not a surface-mount option, modern compact products may require a board-level footprint decision rather than a package conversion. This page consolidates the verified 8-bit architecture, 12 MHz clock, ROMless configuration, 236-byte RAM, 40-pin DIP construction, packaging information, verified drop-in candidate, and practical design considerations into a compact engineering reference for sourcing and product-maintenance work.

RFQ Contact
Z86C9012VSC - 8-Bit 12MHz ROMless MCU | Zilog
Z86C9012VSC

Z86C9012VSC - 8-Bit 12MHz ROMless MCU | Zilog

The Zilog Z86C9012VSC is a ROMless CMOS Z8 8-bit microcontroller operating at 12 MHz, with 236 bytes of RAM, external-memory capability, and a 44-pin leaded chip carrier package. Its 3 V to 5.5 V operating range supports industrial-control logic operating from conventional regulated rails. As a ROMless device, the Z86C9012VSC requires an external program-memory connection rather than storing its application program internally. A microcontroller is a programmable semiconductor that integrates a CPU, memory, input/output ports, timers, and communication peripherals on one device. The Z8 family is an 8-bit microcomputer architecture designed for embedded control. Within the product hierarchy, Z86C9012VSC is a ROMless CMOS Z8 microcontroller, an 8-bit microcontroller, and a member of the broader embedded-processing and semiconductor categories. Key features include a 12 MHz operating speed, 8-bit CPU architecture, 236 bytes of internal RAM, 44-pin packaging, and operation from 3 V to 5.5 V. The ROMless configuration is significant because firmware can be stored in external memory and changed without replacing the microcontroller. The large 44-pin package also provides more external signal connections than a small 8- or 20-pin embedded controller. The controller uses a CMOS Z8 architecture and supports external-memory-based operation, allowing code flexibility in embedded systems. Its 236-byte internal RAM provides working storage for variables, register state, and stack operations, while the external program-memory interface separates application code from the controller. The 3 V to 5.5 V supply range accommodates regulated 3.3 V and 5 V system rails. The commercial temperature grade should be considered when operating beyond typical indoor commercial conditions. Typical applications include industrial controllers, keypad interfaces, motor and relay control, appliance control, instrumentation, and small automation systems. The 44-pin package can support multiple discrete input/output signals and external-memory interfaces, making the device appropriate for designs that need more I/O than compact 8-bit microcontrollers provide. Designers should verify the exact pin assignment, external-memory interface, decoupling requirements, and timing limits in the manufacturer datasheet before layout. Because the device is ROMless, PCB routing must preserve the external program-memory bus and all associated control signals. The 3 V to 5.5 V supply specification also requires appropriate decoupling and careful signal-level compatibility with connected memory and peripherals. This page consolidates the Z86C9012VSC operating characteristics, package information, sourcing guidance, application fit, and verified same-package replacement information. It also highlights the practical distinction between an 8-bit ROMless Z8 controller and modern MCUs with embedded flash: the Z86C9012VSC favors external-memory flexibility, whereas flash-based devices favor simpler standalone firmware implementation.

RFQ Contact
Z86C9116AEG - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116AEG

Z86C9116AEG - 8-Bit 16MHz ROMless MCU | Zilog

The Zilog Z86C9116AEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz and packaged in a 44-LQFP measuring 10 mm by 10 mm. Its 4.5 V to 5.5 V operating-supply range and -40 °C to 105 °C ambient-temperature range suit embedded control systems requiring a compact, surface-mountable processor. A microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, and peripheral functions on one device. The Z8 family belongs to the 8-bit microcontroller hierarchy, where each instruction operates on an 8-bit data unit. The Z86C9116AEG is ROMless, meaning that its program storage must be supplied by external memory rather than an internal mask-programmed ROM. This architecture is useful when firmware updates, flexible code storage, or separate program and data memories are required. The headline operating characteristics are a 16 MHz clock, an 8-bit architecture, and ROMless configuration. Its 4.5 V minimum supply voltage means the device operates within a conventional 5 V embedded-processing range. The 44-LQFP package provides a surface-mount assembly option with external leads on all four sides. Since the MCU has no internal program ROM, the board must include an external program-memory interface and suitable memory circuitry. The Z86C9116AEG targets compact embedded controllers where an 8-bit processor is sufficient for supervisory control, sequencing, input processing, and peripheral coordination. The external-memory architecture allows the application code to be changed without replacing the microcontroller, which can simplify long-life product maintenance. Clock and bus timing must be designed for 16 MHz operation, while firmware must account for the access time of the selected external memory device. Typical uses include industrial control modules, instrument panels, building equipment, appliance controllers, and compact peripheral controllers. The 44-LQFP package is particularly useful where a larger leaded package would be unsuitable for automated assembly. For cost-sensitive or space-constrained designs, engineers should compare the board area and external-memory cost of this ROMless device against Z8 devices that contain internal program memory. PCB design should preserve the pin assignments and layout requirements defined by the Zilog datasheet, especially for the external program-memory interface and clock circuitry. Decoupling capacitors should be placed directly at the supply pins, while all unused inputs should be connected to defined logic levels. Firmware development requires a programmer, Z8-compatible toolchain, and the device-specific configuration information published by Zilog. This product page consolidates the confirmed device identity, package, supply range, temperature range, and ROMless architecture into an engineering-focused selection reference. It also distinguishes the confirmed characteristics of Z86C9116AEG from unverified replacement assumptions, helping engineers make a defensible PCB, firmware, and sourcing decision.

RFQ Contact
Z86C9116ASG - 8-Bit 16MHz ROMless Z8 MCU | Zilog
Z86C9116ASG

Z86C9116ASG - 8-Bit 16MHz ROMless Z8 MCU | Zilog

Zilog Z86C9116ASG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz in a 44-LQFP package measuring 10 x 10 mm. It targets compact control systems that require external program memory, high-speed peripheral interfacing, and a general-purpose MCU architecture without integrated ROM. The device is identified as an MCU 8-Bit ROMless 44-LQFP (10x10) member of the Z86C91 family. A ROMless microcontroller is a microprocessor-family device that fetches executable code from external memory instead of storing its application program in an internal ROM. Within the component hierarchy, this part is a microcontroller, a specialized single-chip computer, and a member of the semiconductor category. The Z8 architecture provides a compact instruction set and integrated peripherals for embedded control, while external program memory allows application code capacity to scale independently of the MCU. The headline characteristics are an 8-bit CPU, a 16 MHz operating frequency, and ROMless operation in a 44-pin LQFP package. A 5 V supply is identified for this device. The 44-LQFP (10x10) package provides a substantially larger pin count than the small 8-pin and 14-pin MCU packages commonly used in simple control products, supporting a greater combination of I/O and peripheral connections while remaining suitable for space-constrained system-on-module designs. The Z86C9116ASG is appropriate for industrial control modules, appliance controllers, embedded interface boards, and legacy Z8 systems that depend on external program storage. ROMless architecture is especially useful when firmware must be updated in the field, stored in a separate memory device, or shared across multiple controller variants. It is also useful when a designer wants to retain the flexibility of choosing external memory density and technology independently of the MCU. Because this is a ROMless Z8 device, the system must include suitable external program and program-memory interface circuitry. Confirm the external memory device, address decoding, bus timing, and reset behavior against the manufacturer datasheet before layout. Because the package exposes 44 leads, pin multiplexing and the available port configuration must be reviewed for the intended design rather than inferred from an 8-pin MCU example. For new designs, verify lifecycle status, firmware-tool support, and external-memory requirements with the manufacturer. For an existing Z8 product, preserve the original memory-device and bus arrangement where possible. This page consolidates package details, technical specifications, application guidance, comparison parameters, and engineering notes that support component selection and board-level planning.

RFQ Contact
Z86C9116FEC - 16MHz 8-Bit ROMless MCU | Zilog | Embedded Control
Z86C9116FEC

Z86C9116FEC - 16MHz 8-Bit ROMless MCU | Zilog | Embedded Control

The Zilog Z86C9116FEC is an 8-bit Z8 ROMless microcontroller operating at 16MHz, with 236 bytes of RAM, 32 I/O lines, two 8-bit timers, and a UART interface in a 44-LQFP package measuring 10mm by 10mm. The device is designed for embedded control applications that require external program memory and a compact, surface-mount microcontroller package. A ROMless microcontroller is an 8-bit microcontroller that does not contain its application program in internal ROM. It must be paired with an external memory device, which gives the system designer flexibility to select program capacity independently of the MCU. In the product hierarchy, Z86C9116FEC belongs to the Z8 family of ROMless microcontrollers and provides a straightforward architecture for small embedded controllers. The principal features of this device include a 16MHz operating frequency, 236 bytes of on-chip RAM, 32 general-purpose I/O lines, two 8-bit timer blocks, and one UART communication interface. Its ROMless architecture makes it appropriate when firmware changes are expected, when program storage requirements vary between products, or when a common external flash configuration is desired across multiple controller variants. The Z8 architecture provides an 8-bit processing path optimized for embedded control tasks rather than high-throughput computing. Combined with 32 I/O lines, the device can directly support digital inputs, outputs, control signals, and peripheral interfaces. The two 8-bit timers support timing and event-counting duties, while the UART provides a serial channel for connecting the controller to a host, sensor assembly, or communication module. Typical design opportunities include programmable logic controllers, appliance controllers, building-control modules, motor-sequence controllers, industrial interface modules, and compact embedded automation products. Its 44-LQFP package provides a practical pin count for systems requiring numerous external connections while remaining compatible with standard surface-mount assembly and inspection processes. A key design consideration is that the ROMless device requires suitable external program memory and a correctly designed bus interface. Designers should also confirm the available operating voltage, clock configuration, peripheral pin assignments, and memory interface requirements against the current Zilog datasheet before finalizing the schematic or PCB layout. This product page consolidates the verified distributor specifications, package information, pricing availability, cross-reference evidence, and design considerations for Z86C9116FEC. It also distinguishes confirmed drop-in replacements from merely similar controllers, helping engineers avoid selecting a 44-LQFP part whose pinout or architecture is not actually compatible.

RFQ Contact
Z86C9116FEG - 16MHz ROMless 8-Bit MCU | Zilog | Industrial
Z86C9116FEG

Z86C9116FEG - 16MHz ROMless 8-Bit MCU | Zilog | Industrial

The Zilog Z86C9116FEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz, with 236 x 8 bytes of RAM, 24 general-purpose I/O pins, and UART/USART connectivity in a 44-LQFP 10 x 10 mm surface-mount package. Its 4.5 V to 5.5 V supply range and -40°C to +105°C industrial temperature range suit embedded control systems requiring compact, deterministic communications and general-purpose I/O. The Z86C9116FEG is designed for applications that require external program memory while retaining a compact 8-bit control architecture. What is an 8-bit ROMless microcontroller? A ROMless microcontroller is a programmable embedded controller that does not contain its own program memory. Instead, the application program is stored in external memory, such as an external ROM or nonvolatile memory. This makes ROMless devices useful when the firmware must be large, frequently updated, or separately managed. The Z8 family combines an 8-bit CPU, general-purpose I/O, timers, serial communication, and external-memory interfacing in a single device. The Z86C9116FEG provides a 16 MHz operating frequency, 236 x 8 bytes of internal RAM, 24 general-purpose I/O pins, and UART/USART connectivity. Its 44-LQFP package exposes 44 leads and is intended for surface-mount PCB assembly. The 4.5 V minimum operating voltage and 5.5 V maximum operating voltage are important constraints for systems using 5 V logic. The industrial temperature range supports use in factory equipment, industrial controllers, instrumentation, and other embedded applications where consumer-temperature components may be unsuitable. The ROMless architecture separates code execution from program storage and allows the designer to select the external memory device based on code size, programming requirements, or field-update strategy. The 16 MHz clock rate provides a balance between processing throughput, power consumption, and system design simplicity for 8-bit control tasks. UART/USART support allows the controller to communicate with sensors, host systems, converters, or other embedded modules. Typical uses include industrial automation modules, serial protocol bridges, keypad and display controllers, appliance control boards, motor-control supervisory circuits, and compact embedded instruments. The 24 available I/O pins can support digital inputs, outputs, control signals, status indicators, and external interface functions when the application does not require all pins for specialized peripheral functions. Designers should verify the external-memory interface, oscillator requirements, decoupling, and the complete 44-pin signal map against the manufacturer datasheet before layout. Because the provided source data does not publish a verified pinout or pricing table, those details remain explicitly marked as unavailable in the technical records. This page combines verified distributor specifications, package information, application guidance, and purchasing considerations for engineers evaluating the Z86C9116FEG.

RFQ Contact
Z86C9116FSC 16MHz ROMless 8-Bit MCU | Zilog
Z86C9116FSC

Z86C9116FSC 16MHz ROMless 8-Bit MCU | Zilog

Zilog Z86C9116FSC is an 8-bit ROMless Z8 microcontroller operating at 16 MHz and packaged in a 44-pin LQFP measuring 10 mm by 10 mm. It provides 236 bytes of RAM, 32 I/O pins, two 8-bit timers, and a UART interface. The device combines a compact 8-bit embedded-control architecture with external program-memory support, making it suitable for cost-sensitive control systems that require dedicated application firmware. An 8-bit microcontroller is a microprocessor core, memory interface, and peripheral set integrated on one semiconductor die. The Z8 family belongs to the broader microcontroller and embedded-controller hierarchy, where firmware controls sensors, relays, user interfaces, communications, and power functions. Unlike a ROM-based device, the ROMless Z86C9116FSC requires an external program-memory device, allowing the program capacity and interface arrangement to be selected according to the finished system. The verified product information identifies a 16 MHz operating speed, 236 bytes of RAM, 32 I/O pins, two 8-bit timers, and one UART interface. These resources support basic sequential control, periodic timing, serial communication, and digital input/output tasks. The 44-LQFP package provides 44 physical leads for power, ground, clock, reset, programming, I/O, and external-memory connections, although exact lead assignments are not included in the supplied source data. The ROMless architecture is the principal engineering distinction of this Z8 device. External program memory allows firmware capacity to scale with the application, but the PCB must also provide the external memory interface, address and data routing, and associated signal-integrity measures. Designers should therefore evaluate the complete memory subsystem rather than treating the microcontroller package as a self-contained storage solution. Typical uses include small industrial controllers, appliance-control boards, keypad interfaces, communication modules, motor or relay sequencers, and compact embedded products that benefit from the Z8 instruction set and dedicated timers. External program memory is appropriate when a fixed application program must be loaded during manufacturing rather than stored in an internal ROM mask. A primary design consideration is package and memory-interface validation. Confirm the exact Z86C9116FSC pin assignment, external-memory requirements, clock configuration, and programming connection against the manufacturer documentation before layout release. Because the available verified data does not include a complete pinout or numerical distributor price schedule, those details remain explicitly unresolved rather than being inferred. This product page consolidates the verified distributor specifications, purchasing sources, package information, and engineering guidance for the Z86C9116FSC. It also distinguishes verified facts from missing electrical, pinout, pricing, and lifecycle details, helping engineers assess fit before committing to a PCB design or production order.

RFQ Contact
Z86C9116PEC - 8-Bit 16MHz ROMless Z8 MCU | Zilog
Z86C9116PEC

Z86C9116PEC - 8-Bit 16MHz ROMless Z8 MCU | Zilog

The Zilog Z86C9116PEC is an 8-bit Z8 ROMless microcontroller operating at 16 MHz in a 40-pin PDIP package. It is designed for embedded control applications requiring a compact Z8-compatible CPU, external program memory, and through-hole PCB assembly. The device uses CMOS technology and an 8-bit data bus, providing a straightforward upgrade path within the Z86C91 microcontroller family. A ROMless microcontroller is an integrated circuit that contains the processor core and peripheral functions but retrieves its program from external memory. This differs from a mask-programmable or flash-memory MCU because application code remains in external storage, allowing the firmware to be updated without replacing the controller. The Z86C9116PEC occupies the ROMless, Z8, 8-bit, 16 MHz portion of the Zilog embedded-controller portfolio. Key characteristics include a 16 MHz operating frequency, an 8-bit CPU architecture, external-program-memory operation, and a 40-pin PDIP package with a 0.620-inch body width and 15.75 mm length. The through-hole package supports conventional PCB assembly and is useful in control boards that require manual insertion, prototyping, or socketed serviceability. Its 8-bit data bus and 16 MHz clock place it in the traditional embedded-control class rather than the high-speed 16- or 32-bit application-processor class. The Z8 architecture is designed around a compact instruction set and dedicated peripheral resources, allowing engineers to implement control loops, interface protocols, and timing functions with relatively modest external circuitry. Because the controller is ROMless, external address and data buses connect the processor to program storage. Board-level design therefore requires careful routing of address, data, and control signals to preserve signal integrity at the operating clock. Typical uses include industrial machine controls, appliance controllers, instrumentation modules, motor-control support logic, and legacy peripheral-control boards. The 40-pin PDIP package also makes the device suitable for educational and prototype platforms where through-hole components are easier to assemble and rework. It is less suitable for new space-constrained products because surface-mount packages normally reduce board area and improve automated assembly throughput. When laying out a board for the Z86C9116PEC, place external program-memory devices and any bus transceivers close to the controller, route clock and address signals away from high-current switching nodes, and decouple each supply rail near the device. Confirm the memory map, address multiplexing, and external bus timing against the manufacturer datasheet before releasing the PCB. This page combines device specifications, package details, verified listing links, and practical design guidance for engineers planning a Z86C91-based control board.

RFQ Contact
Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116PEG

Z86C9116PEG - 8-Bit 16MHz ROMless MCU | Zilog

Zilog Z86C9116PEG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 32 I/O ports, and a 40-pin CDIP package. It is designed for embedded control systems requiring a compact 8-bit processor, dedicated I/O capacity, and external program memory. A ROMless microcontroller is a microprocessor that contains no embedded program memory. The Z86C9116PEG therefore requires an external memory device for firmware storage, while its internal architecture supplies the central processing unit, I/O control, timers, interrupts, and communication peripherals. Within the semiconductor hierarchy, it belongs to the microprocessor and microcontroller family, specifically the Zilog Z8 product line. The principal operating characteristics are a 16 MHz clock, an 8-bit data bus, 32 I/O ports, and a 4.5 V to 5.5 V operating supply. Its industrial operating range makes it appropriate for factory equipment, instrumentation, access-control systems, and embedded controllers that require deterministic peripheral control. The 40-pin CDIP package also supports traditional through-hole assembly and prototyping workflows. The ROMless architecture separates firmware storage from the controller, allowing application code size to scale with an external memory component. This can be useful in designs that need multiple firmware variants, field-programmable logic, or a shared memory interface. The trade-off is that the board must provide an external memory device and associated address and data connections, increasing component count and PCB complexity relative to a ROM-based microcontroller. Typical applications include industrial keypad scanners, programmable timers, motor-control interfaces, serial protocol bridges, test fixtures, and compact control panels. The Z86C9116PEG is especially appropriate when a design needs more I/O than a small surface-mount controller offers but does not require the processing power or memory capacity of a 16- or 32-bit MCU. Before layout, confirm the external-memory interface requirements, reset behavior, oscillator arrangement, and available I/O functions in the Zilog Z86C9116 datasheet. Use the manufacturer pin-description table when assigning tracks because the 40-pin CDIP footprint includes both power, ground, clock, reset, I/O, and external-memory signals. This page combines core Z86C9116PEG specifications, verified sourcing information, compatible alternatives, and practical selection guidance to help engineers evaluate the controller for legacy and new embedded-control designs.

RFQ Contact
Z86C9116PSC - 16MHz ROMless 8-Bit Z8 MCU | Zilog
Z86C9116PSC

Z86C9116PSC - 16MHz ROMless 8-Bit Z8 MCU | Zilog

The Zilog Z86C9116PSC is a ROMless 8-bit Z8 microcontroller operating at up to 16 MHz and packaged in a 40-pin PDIP through-hole package. Its key characteristics are a Z8 CPU core, 16 MHz maximum operating frequency, ROMless program-memory architecture, and CMOS implementation. The MCU is designed for embedded control systems requiring an external program-memory device and conventional through-hole PCB assembly. An 8-bit microcontroller is a compact embedded-control processor used to read inputs, execute control logic, and drive outputs in products such as industrial controllers, instruments, appliances, and communication equipment. The Z8 family combines a processor core with on-chip peripherals and bus interfaces, while a ROMless architecture moves firmware into external memory. This creates a microcontroller, embedded processor, and programmable logic device within the wider semiconductor hierarchy. The 16 MHz clock rate gives the Z86C9116PSC greater processing headroom than 8 MHz Z8 devices while retaining an 8-bit instruction architecture. Its ROMless configuration permits program-memory capacities and interfaces determined by the external memory device rather than a fixed internal program ROM. CMOS operation supports low-voltage digital systems, and the PDIP-40 package facilitates prototype insertion, inspection, and through-hole PCB assembly. The part belongs to the Zilog Z86C91 family and uses the Z8 CPU core. Its 40-pin package exposes the device's address, data, control, port, reset, clock, and power connections. Because external program memory is required, the system designer must select a compatible memory device and define the electrical and address-bus connections before laying out the PCB. Operating voltage limits, memory-interface timing, I/O ratings, and detailed peripheral assignments should be confirmed against the manufacturer datasheet. Typical applications include industrial panel controllers, instrumentation, keypad interfaces, motor and relay-control boards, data-acquisition modules, and legacy control systems. The 40-pin PDIP format is particularly useful where manual servicing, socketed assembly, or through-hole compatibility has priority over board area. It is less suitable for highly compact products where a surface-mount package would reduce board size and manufacturing complexity. Design should reserve a stable clock source, adequate bypass capacitance, and clean power distribution around the 40-pin device. The external program-memory bus must be routed according to the device's timing and loading requirements, while unused inputs should be connected to defined logic levels. Review the pin-description table and recommended application circuit in the Zilog datasheet before finalizing the schematic and footprint. This page combines the verified product identity, package and architecture details, price-sourcing guidance, same-family drop-in options, comparison parameters, and practical PCB guidance. It is intended to help engineers identify the correct MCU, verify compatibility, and plan an accurate Z86C9116PSC implementation.

RFQ Contact
Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog
Z86C9116PSG

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9116PSG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 236 bytes of RAM, 32 I/O ports, and a 40-pin PDIP package. It belongs to the Z86C91 product family and requires an external program-memory device because no internal ROM is provided. An 8-bit ROMless microcontroller is a compact embedded-control processor designed for systems that require deterministic I/O handling rather than application storage inside the MCU. In the product hierarchy, the Z86C9116PSG is a microcontroller, an embedded processor, and a semiconductor integrated circuit. Its ROMless architecture separates program memory from the controller, allowing designers to select external storage according to firmware size and interface requirements. The headline features include a 16 MHz operating clock, an 8-bit data bus, 236 bytes of on-chip RAM, and 32 I/O ports. The 4.5 V to 5.5 V supply range supports conventional 5 V industrial embedded systems. Because the MCU is ROMless, an external program-memory device is required, while the 236 bytes of internal RAM provide limited working memory for variables, stack operations, and control-state management. The Z86C9116PSG uses the Z8 architecture and is positioned as a compact, low-cost controller for embedded products requiring parallel digital I/O. Its 40-pin PDIP package provides a comparatively large number of external connections compared with smaller surface-mount MCUs, making it practical for prototyping, through-hole industrial assemblies, and applications that need direct access to peripheral pins. Typical uses include appliance controllers, industrial sequencers, keyboard or panel interfaces, lighting-control modules, instrumentation, and small embedded automation systems. The 32 I/O ports are particularly useful when a design must connect multiple switches, indicators, sensors, or actuators without relying on additional interface expanders. When designing around this device, engineers must account for the absence of internal program memory and provide a suitable external memory implementation. The available verified data does not specify the external-memory interface, exact pin assignments, peripheral mix, or detailed timing characteristics, so those items should be confirmed in the manufacturer datasheet before schematic capture. This product page consolidates distributor availability, verified pricing, device hierarchy, package information, and same-brand replacement analysis. It also distinguishes directly documented drop-in candidates from alternatives that cannot be verified as pin-to-pin compatible, helping engineers avoid replacing an MCU solely because the clock speed and package description look similar.

RFQ Contact
Z86C9116VEC - 16MHz ROMless 8-Bit MCU | Zilog | 44-Pin LCC
Z86C9116VEC

Z86C9116VEC - 16MHz ROMless 8-Bit MCU | Zilog | 44-Pin LCC

The Zilog Z86C9116VEC is a ROMless 8-bit Z8 microcontroller operating at 16 MHz, with a 4.5 V to 5.5 V supply range and 32 I/O ports in a 44-pin J-lead LCC package. Designed for embedded control applications that require external program and data memory, the device provides an 8-bit data bus and an industrial operating grade. A ROMless microcontroller is a type of embedded processor that contains no embedded program memory. Instead, external memory stores the executable firmware, allowing application capacity to scale independently of the controller. In system terminology, the Z86C9116VEC belongs to the embedded MCU family and sits within the broader category of programmable microcontrollers and semiconductors. Key characteristics include a 16 MHz clock, 8-bit parallel architecture, 32 I/O ports, and operation from 4.5 V to 5.5 V. The absence of internal ROM makes the device suitable for applications in which firmware is loaded from external nonvolatile memory or programmed during a manufacturing and test flow. Its 44-pin LCC package also supports compact, surface-mount assemblies where a plastic-leaded chip carrier is acceptable. The Z8 architecture combines an 8-bit central processing unit with dedicated peripheral functions and an external-memory interface. Because the program store is external, the board must provide suitable memory logic, address decoding, and bus timing. Component selection should account for the external device access time and the timing margin available at the selected operating frequency. Typical uses include industrial controllers, peripheral controllers, embedded instruments, keypad interfaces, and compact automation modules. The 32 available I/O ports allow the device to supervise switches, indicators, sensors, and actuators while an external memory device retains firmware and data. When laying out the PCB, treat external program-memory routing as a signal-integrity task. Keep the processor-to-memory address and data traces short, provide a solid ground reference, and place bypass capacitors close to the supply pins. Confirm the external memory interface and all package-level assignments against the current Zilog datasheet before fabrication. This page combines the key electrical specifications, package details, sourcing guidance, drop-in alternatives, and design notes needed to evaluate the Z86C9116VEC during component selection and PCB planning.

RFQ Contact
Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog
Z86C9116VEG

Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9116VEG is an 8-bit ROMless CMOS microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range. It provides an 8-bit data bus, 32 I/O ports, and an industrial operating range. The part is identified as a DIP-40 device in the technical listing, making it suitable for designs that require a through-hole controller with external program memory. As a ROMless microcontroller, the Z86C9116VEG requires an external program-memory device connected through its address and data buses. This architecture separates code storage from the controller and allows the program size to be selected during system design. The 16 MHz operating speed provides a practical balance between processing throughput, power consumption, and external-memory access time for cost-sensitive embedded control systems. The listed electrical characteristics include a 4.5 V minimum operating supply and a 5.5 V maximum operating supply. An 8-bit external data bus supports connection to external program memory, while the 32 available I/O ports provide dedicated digital interfaces for sensors, switches, indicators, relays, and peripheral control signals. The device operates in the industrial temperature range, supporting industrial control and instrumentation environments. Because the device is ROMless, the complete memory system depends on the external memory interface, address decoding, and firmware initialization sequence. Board designers should confirm the external bus timing and address map against the manufacturer datasheet before layout release. Decoupling, grounding, and unused-pin treatment are equally important for reliable operation in a through-hole industrial design. Typical uses include industrial controllers, data-acquisition modules, keypad interfaces, motor-control sequencers, appliance controllers, and embedded instrumentation. The DIP-40 format also supports prototyping and legacy system maintenance where socketed parts and hand-wiring are common. This page combines lifecycle information, verified distributor listings, pin-package details, application guidance, and engineering notes to support component selection and board-level planning for the Z86C9116VEG.

RFQ Contact
Z86C9116VSC - 8-Bit 16MHz ROMless MCU | Zilog
Z86C9116VSC

Z86C9116VSC - 8-Bit 16MHz ROMless MCU | Zilog

The Zilog Z86C9116VSC is an 8-bit Z8 ROMless microcontroller operating at 16 MHz, with 236 x 8-bit RAM, 24 I/O pins, one UART/USART interface, and a 44-pin PLCC surface-mount package. It is intended for embedded control and serial-communication designs that require external program memory and a compact leaded surface-mount footprint. A ROMless microcontroller is a semiconductor that executes application code from external memory instead of storing its program in an internal ROM. Within the embedded-control hierarchy, the Z86C9116VSC belongs to the 8-bit microcontroller class, where deterministic instruction execution and a broad peripheral set can provide an economical alternative to more complex 16- or 32-bit processors. Its Z8 architecture combines the processor core with embedded control peripherals in one integrated circuit. The principal device characteristics are a 16 MHz maximum clock frequency, 236 bytes of internal data RAM, and 24 general-purpose I/O pins. Because the MCU is ROMless, the system designer must connect external program memory and also confirm the required address, data, and control signals in the application schematic. The integrated UART/USART supports serial communication, while the internal oscillator reduces the number of external clock components normally needed for basic controller designs. The Z86C9116VSC is assembled in a 44-terminal PLCC package designated QCCJ. Its square package body and J-bend leads are intended for surface mounting, allowing the device to be placed on a PCB without through-hole insertion. The commercial temperature designation identifies its intended operating class, while the VSG, VEC, VEG, and AEG family variants provide different temperature or grade options for design portfolios that require controlled PCB migration. Typical applications include industrial control panels, serial interface adapters, keypad and display controllers, instrumentation, appliance controllers, and embedded communications modules. The 24 available I/O lines support discrete sensors, switches, indicators, and peripheral control, while the UART/USART provides a practical path to a host processor, display, modem, or service interface. PCB design should begin with the manufacturer pin-description and memory-interface tables. Because the device has no internal program ROM, external memory address width, chip-select behavior, read timing, and write-control requirements must be resolved before layout. Place decoupling and clock-support components according to the circuit guidelines in the manufacturer documentation, and preserve the PLCC land pattern when comparing temperature-grade replacements. This page combines the confirmed Z86C9116VSC device characteristics, same-footprint Z8 alternatives, parameter comparisons, and practical migration guidance. It also separates commercial sourcing questions from engineering selection so engineers can identify a qualified replacement and request current availability through the XAIPART Request a Quote form.

RFQ Contact
Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog
Z86C9116VSG

Z86C9116VSG - 16MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9116VSG is an 8-bit Z8 ROMless microcontroller with a 16 MHz clock speed, 32 I/O ports, and a 44-pin PLCC package. Its 4.5 V to 5.5 V supply-voltage range supports industrial control systems that use a conventional 5 V power rail. The ROMless architecture requires an external program-memory device, while the integrated 32-port I/O capability reduces the number of companion interface ICs needed in small embedded systems. An 8-bit microcontroller is a compact processor designed around a byte-oriented architecture, embedded control peripherals, and direct digital input/output. The Z8 family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor components. Compared with a general-purpose processor, this device focuses on deterministic control tasks, communication peripherals, timers, and externally accessed program and data memory rather than operating-system performance or high-bandwidth computation. Principal features include ROMless operation, an 8-bit data bus, a 16 MHz maximum clock, and 32 I/O ports. The 44-pin PLCC package provides enough connections for external memory interfaces, parallel I/O, control signals, and clock or reset support. Because the device has no internal program memory, system access must include suitable external memory and address, data, and control wiring. The 4.5 V minimum supply voltage also leaves less headroom for low-voltage operation than 3.3 V-oriented microcontrollers. The Z86C9116VSG belongs to the Zilog Z86C91 family and uses the Z8 architecture. Its ROMless design provides flexibility for applications that require firmware upgrades, field-configurable control logic, or program storage in a separate nonvolatile device. At the same time, external memory introduces address-decoding and bus-timing requirements that must be considered during schematic design and PCB layout. The 16 MHz operating speed provides sufficient instruction throughput for typical embedded sequencing, data acquisition, keypad, display, actuator, and industrial automation tasks. Typical uses include programmable logic controllers, industrial controllers, instrumentation panels, keyboard scanners, LED or display sequence controllers, data-acquisition systems, and compact embedded automation equipment. The 32 I/O ports are especially useful for machines requiring numerous digital inputs and outputs, while external program memory allows application firmware to be sized independently of the microcontroller package. A critical design consideration is the ROMless implementation. Route the external memory bus cleanly, preserve the timing margin required by the Z8 bus interface, and include the required clock and reset components. Keep sensitive analog or communication circuitry away from high-current memory outputs, and validate signal integrity across all board lengths and temperature conditions. This page consolidates the key electrical ratings, package identity, sourcing considerations, and drop-in comparison candidates for the Z86C9116VSG. It also highlights the practical trade-offs involved in retaining the Z8 platform, especially external-memory requirements, package availability, and the difference between a true pin-compatible replacement and a merely similar controller.

RFQ Contact
Z86C9320ASG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320ASG

Z86C9320ASG - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320ASG is an 8-bit Z8 ROMless microcontroller rated for operation up to 20 MHz and supplied in a 44-LQFP package measuring 10 mm by 10 mm. It belongs to the Z86C93 controller family and includes a hardware multiplier, a divider, and three 16-bit counter timers for embedded-control workloads that require more arithmetic capability than a basic 8-bit core. An 8-bit microcontroller is a compact embedded-processing component intended to execute firmware, read inputs, control outputs, and manage communication or timing functions in a larger electronic system. Within the embedded hierarchy, this device belongs to the microcontrollers category and uses the Z8 architecture. Because Z86C9320ASG is ROMless, its program memory must be supplied externally rather than being integrated into the device. The Z86C9320ASG combines a 20 MHz maximum clock with a hardwired 16-bit-by-16-bit multiplier, a 32-bit-by-16-bit divider, and three 16-bit counter timers. The multiplier supports efficient arithmetic in motor-control, measurement, and signal-processing routines, while the divider supports frequency and scaling calculations. These dedicated hardware resources reduce the execution burden placed on the 8-bit processor during time-sensitive control operations. The device also provides a capture register and a fast decrement mode, expanding the available event-timing options for industrial controls, counters, and timing-sensitive embedded products. The 44-LQFP package exposes 44 external connections and supports conventional surface-mount PCB assembly. Its 10 mm by 10 mm body is larger than the smallest microcontroller packages but provides a practical pin count for peripheral connections and multi-signal interfaces. Typical design roles include industrial control, digital instrumentation, motor and stepper-control systems, timing modules, and compact embedded controllers. Its dedicated arithmetic and timer resources are particularly useful when the firmware must multiply measurements, divide frequencies, count external events, or coordinate multiple timing sequences without relying entirely on software loops. For a new design, confirm oscillator, reset, clock, programming, interrupt, and I/O assignments against the manufacturer pin description before laying out the PCB. Because this is a ROMless microcontroller, the external memory interface, associated address and data routing, and programming arrangement can materially affect both routing complexity and board-space requirements. This product page combines the manufacturer-family characteristics, package information, source pricing context, cross-reference findings, and practical design considerations needed to evaluate the Z86C9320ASG. It also distinguishes verified drop-in replacements from functionally related 8-bit controllers that require separate pin, clock, memory, and peripheral validation.

RFQ Contact