Products (44,000+)

LC4064C-5T48C - 64-Macrocell, 5ns In-System CPLD | Lattice
LC4064C-5T48C

LC4064C-5T48C - 64-Macrocell, 5ns In-System CPLD | Lattice

The Lattice Semiconductor LC4064C-5T48C is a 64-macrocell in-system programmable complex programmable logic device with a 5 ns propagation delay, up to 400 MHz maximum operating frequency, and 3.3 V, 2.5 V, and 1.8 V supply support. It is supplied in a 48-pin TQFP package for surface-mount PCB assembly. A CPLD is a programmable logic device that combines a structured array of programmable logic blocks with nonvolatile configuration storage. In the product hierarchy, a CPLD is a programmable-logic semiconductor, a higher-level alternative to a fixed combinational logic implementation and a lower-complexity member of the FPGA and CPLD family. In-system programmability allows the LC4064C-5T48C to be configured or reconfigured through the system programming interface without removing it from the circuit board. The LC4064C-5T48C provides 64 macrocells, a 5 ns propagation delay, and a maximum operating frequency of up to 400 MHz. Its I/O structure supports programmable clock polarity and up to four global clock pins, while its output architecture can address up to 80 product-term outputs. These features make the device suitable for glue logic, control logic, protocol bridging, and fixed-function logic that benefits from field configuration. The device is identified by the manufacturer as a SuperFAST high-density PLD in the 3.3 V, 2.5 V, and 1.8 V in-system programmable family. This combination of speed, logic density, and multiple supported supply voltages provides design flexibility across embedded control, communications, industrial, and consumer systems. The manufacturer documentation describes the 48-pin package as a TQFP, while distributor records identify the same 48-LQFP package terminology. Typical applications include bus-interface decoding, state-machine control, peripheral interconnect logic, data-format conversion, board-level timing control, and embedded system start-up sequencing. The five-nanosecond propagation-delay grade is useful where combinational decisions must be made within short system timing windows, while the 400 MHz maximum operating figure supports designs clocked at higher system frequencies subject to the device's timing constraints. Designers should verify the exact I/O standards, input thresholds, output drive, configuration interface, and AC timing against the manufacturer datasheet for the selected supply voltage and operating conditions. PCB layout should provide a short, clean programming path, adequate ground-plane continuity, and decoupling close to the supply pins. Because this page relies on the supplied web records rather than the complete manufacturer timing tables, unspecified electrical details are marked for verification rather than inferred. This page consolidates the verified 64-macrocell, 5 ns, 400 MHz, 48-pin TQFP, clocking, and programming attributes with distributor inventory, source links, candidate same-footprint alternatives, and application-oriented engineering guidance. That synthesis makes the LC4064C-5T48C easier to evaluate for design feasibility, sourcing, and PCB compatibility.

RFQ Contact
LC4064C-5T48I - 64-Macrocell 400 MHz CPLD | Lattice
LC4064C-5T48I

LC4064C-5T48I - 64-Macrocell 400 MHz CPLD | Lattice

Lattice Semiconductor LC4064C-5T48I is a 64-macrocell complex programmable logic device (CPLD) with a 400 MHz maximum operating frequency and 2.5 ns propagation delay. The device supports 3.3 V, 2.5 V, and 1.8 V supply configurations and is supplied in a 48-pin TQFP package. A complex programmable logic device is a user-programmable semiconductor that combines programmable logic arrays with a programmable interconnect. A CPLD occupies the functional hierarchy between basic fixed-function logic and an FPGA: it retains the Electrically Erasable Programmable ROM architecture while offering deterministic timing, comparatively simple design entry, and in-system programmability. This makes the LC4064C suitable for control logic, bus arbitration, interface translation, and glue logic rather than general-purpose processor execution. The LC4064C provides up to four global clock pins with programmable clock polarity control. Its output macrocells can drive as many as 80 product terms per output, allowing moderately dense combinational and registered logic to be consolidated into one package. The 400 MHz fMAX and 2.5 ns tPD figures make it useful for clocked control paths and multi-clock designs requiring predictable propagation performance. The manufacturer identifies the LC4064C family as a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. Multi-voltage support allows the core and I/O structure to be evaluated against the system voltage plan, although exact core-versus-I/O voltage assignments must be confirmed in the manufacturer datasheet before PCB and power-tree design. Typical uses include peripheral interfacing, legacy bus decoding, clock-domain control, interrupt and glue logic, and embedded system sequencing. A microcontroller or FPGA can use the CPLD as a deterministic companion block for protocol conversion or signal conditioning without adding continuous processor overhead. Designers should reserve configuration pins and verify the supported programming interface, clocking topology, and I/O standards against the package pinout. Because the supplied search evidence confirms the 48-TQFP package but does not expose individual pin assignments, the PCB footprint and pin names must be verified against the official Lattice Semiconductor datasheet before layout release. This page combines the verified distributor specifications, same-package family comparisons, and application-oriented design guidance. It also separates documented performance data from parameters that still require confirmation from the full manufacturer datasheet, helping engineers evaluate the LC4064C-5T48I without treating unverified electrical details as guaranteed specifications.

RFQ Contact
LC4064C-75T44C - 64-Macrocell 7.5ns CPLD | Lattice
LC4064C-75T44C

LC4064C-75T44C - 64-Macrocell 7.5ns CPLD | Lattice

The Lattice Semiconductor LC4064C-75T44C is an ispMACH 4000C-series CPLD with 64 macrocells, four logic blocks, and a maximum propagation delay of 7.5 ns in a 44-pin TQFP package. It supports in-system programming and is identified as a 3.3 V, 2.5 V, and 1.8 V SuperFAST high-density programmable logic device. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy that includes FPGAs. Unlike a software-programmed microcontroller, a CPLD stores a defined Boolean logic configuration in nonvolatile configuration memory. The LC4064C combines multiple logic blocks with a programmable interconnect, allowing fixed digital functions such as interface control, address decoding, state sequencing, and glue logic to operate predictably after configuration. The 64-macrocell architecture provides a practical balance between logic capacity and routing resources for compact control systems. Its 7.5 ns speed grade is suitable for clocked control logic, data acquisition, peripheral interfacing, and general-purpose digital subsystems. In-system programmability allows a board to be configured or updated through the device's programming interface, while the 44-pin TQFP package supports conventional surface-mount assembly. The device is associated with the Lattice ispMACH 4000C family and supports multiple supply-voltage configurations identified for the LC4064C family. Unlike a microcontroller with a processor core and executable software, this CPLD uses configurable logic blocks and fixed interconnect resources. This architecture can provide deterministic hardware behavior after configuration and can consolidate several discrete gates and counters into one programmable component. Typical applications include industrial control interfaces, test and measurement equipment, communications link control, embedded data-acquisition systems, power-system sequencing, and compact peripheral adapters. A design can implement parallel data capture, pulse-width generation, protocol framing, and status logic in one device when the required architecture fits the available macrocells and I/O resources. Design planning should begin with a complete pin assignment and timing review using the Lattice Semiconductor datasheet and the selected design toolchain. The PCB should preserve the device's required programming, configuration, clock, ground, and supply connections, while decoupling and layout should follow the package-specific recommendations. Programming files, pin constraints, timing constraints, and unused-pin treatment must be reviewed before fabrication. This page organizes the verified device identity, package, programming characteristics, speed grade, and practical design considerations while identifying family-based drop-in alternatives. It also distinguishes the LC4064C from the LC4064V, highlights speed-grade and temperature-suffix trade-offs, and provides comparison points that help engineers determine PCB, timing, and qualification impacts before approving a substitution.

RFQ Contact
LC4064C-75T44I - 64-Macrocell 168MHz CPLD | Lattice Semiconductor
LC4064C-75T44I

LC4064C-75T44I - 64-Macrocell 168MHz CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064C-75T44I is an in-system-programmable CPLD with 64 macrocells, a maximum operating frequency of 168 MHz, and a 1.8 V core supply in a 44-pin TQFP tray package. It belongs to the ispMACH 4000C family, which combines the architectures of ispLSI 2000 and ispMACH 4A to provide programmable logic for systems requiring deterministic control, interface translation, and compact logic consolidation. A CPLD, or complex programmable logic device, is a programmable semiconductor that combines multiple logic functions into one reconfigurable integrated circuit. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and a practical implementation of hardware description language designs. Its interconnect and macrocell architecture can implement combinational and sequential logic, allowing one package to replace networks of discrete gates, counters, decoders, and state machines. The LC4064C provides 64 macrocells and supports operation at frequencies up to 168 MHz. Its ispMACH architecture is designed for SuperFAST programmable logic applications, while in-system programming supports configuration within the target system rather than requiring a separate dedicated programming step. The device supports 3.3 V, 2.5 V, and 1.8 V operating arrangements identified in the family documentation, allowing implementation across multiple logic voltage levels. The 44-pin TQFP package provides a compact surface-mount footprint with leads on all four sides. This package arrangement is suitable for industrial and commercial PCB layouts where the design needs more general-purpose I/O than a very small programmable-logic package while retaining manageable board density. The -75 suffix identifies the device speed grade, and the I suffix identifies the industrial temperature option. Typical applications include bus-interface bridging, control-plane logic, industrial automation, data-acquisition control, legacy peripheral emulation, and general glue-logic consolidation. The 64-macrocell capacity is particularly useful when a design combines several address decoders, registers, counters, state machines, and interface control blocks that benefit from a single configurable implementation. Designers should confirm the exact pin assignment, supported I/O standards, configuration scheme, and power architecture against the manufacturer datasheet before layout release. PCB planning must preserve the package pin numbering and provide suitable power and ground distribution, while system timing should use the -75 speed grade as the device operating target. This page combines the LC4064C-75T44I device identity, package and timing information with focused alternatives, engineering guidance, and comparison criteria. It helps engineers identify genuine same-footprint replacements while separating exact functional choices from changes that require schematic, pinout, timing, or qualification review.

RFQ Contact
LC4064C-75T48C - 400MHz 48-TQFP CPLD | Lattice Semiconductor
LC4064C-75T48C

LC4064C-75T48C - 400MHz 48-TQFP CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-75T48C is an in-system programmable Complex Programmable Logic Device in the ispMACH 4000C family, with a maximum operating frequency of 400 MHz, a 2.5 ns propagation delay, and a 48-pin TQFP package. It combines programmable logic, global clock distribution, and in-system programmability for compact control, interface, and signal-processing designs. A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple PAL/GAL devices and FPGAs. The LC4064C belongs to the broader hierarchy of programmable logic -> complex programmable logic device -> ispMACH family. Unlike a fixed-function logic circuit, it allows board designers to implement combinational and registered logic that can be revised through an in-system programming interface. The LC4064C-75T48C supports 3.3 V, 2.5 V, and 1.8 V operation according to its device description. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay make it suitable for fast control paths, interface conditioning, protocol conversion, and state-machine logic. The device also provides up to four global clock pins with programmable clock polarity, helping distribute a common clock while supporting both rising- and falling-edge designs. The 48-pin TQFP package provides a conventional surface-mount footprint suitable for automated assembly and moderate I/O density. A surface-mount package reduces board height compared with many leaded logic packages, while its exposed perimeter leads support inspection and rework. The -75 suffix identifies the device speed grade, and the 48C portion identifies the package configuration used in the orderable MPN. Typical applications include industrial control, data acquisition, communication-interface bridging, test equipment, embedded system control, and general-purpose glue logic. The in-system programming capability is especially useful when a design must be updated after assembly or when multiple boards require the same programmable logic configuration. Designers should verify the complete pin description, power rails, and programming interface in the manufacturer datasheet before laying out a PCB. Input and output timing should be evaluated at the intended operating frequency, and unused pins should follow the datasheet's power, ground, or no-connect requirements. The maximum frequency is a device capability rather than a guarantee for every logic design.

RFQ Contact
LC4064C-75T48I - 64-Macrocell 7.5 ns CPLD | Lattice Semiconductor
LC4064C-75T48I

LC4064C-75T48I - 64-Macrocell 7.5 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-75T48I is an in-system-programmable CPLD with 64 macrocells, 7.5 ns propagation delay, 32 input/output pins, and a 48-TQFP surface-mount package. Designed for deterministic logic implementation, it supports 1.65 V operation and an industrial temperature range of -40°C to +105°C. A CPLD, or complex programmable logic device, is a semiconductor that combines programmable AND/OR logic structures with configuration memory. Within the product hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a small FPGA for fixed or moderately changing glue-logic designs. The ispMACH 4000C family is intended to consolidate control logic, interface adaptation, state machines, and signal routing into one reconfigurable device. The LC4064C-75T48I provides four logic elements or blocks, 64 macrocells, and 32 I/O positions in a 48-TQFP package. Its 7.5 ns speed grade supports systems requiring predictable combinational and registered logic performance. In-system programming allows a board to be configured or updated without removing the device, while the industrial temperature rating supports factory automation, industrial control, communications, and embedded equipment. The C-series architecture provides 64 macrocells organized into four logic blocks, enabling moderately complex control functions in a non-volatile programmable logic device. Because the LC4064C family is a legacy CPLD, new designs should also consider device availability, programmer support, and migration options. The exact I/O standard, input thresholds, output drive, input rise/fall time, and configuration architecture should be confirmed in the manufacturer datasheet before final schematic and signal-integrity review. Typical uses include industrial interface controllers, encoder and pulse-processing logic, protocol bridging, control-plane routing, test-fixture sequencing, and embedded peripheral arbitration. The 32 available I/O pins are useful for moderate external connectivity, while the four logic blocks allow several related functions to be consolidated into a single programmable component. Its 48-TQFP package also provides a practical option for automated assembly and inspection. A critical design task is verifying every board-level electrical assumption against the exact datasheet, including mixed-voltage I/O behavior, power-supply sequencing, and programming signals. Place decoupling capacitors close to the supply pins, route programming and configuration signals away from high-speed switching nodes, and observe all absolute maximum and recommended operating conditions. PCB migration is only valid after checking the land pattern, pin functions, and power architecture. This page organizes lifecycle, package, electrical, application, and replacement information for engineering review. It also highlights same-footprint Lattice alternatives and their speed-grade or temperature-grade differences, helping teams evaluate whether a board can remain unchanged or requires qualification and layout review.

RFQ Contact
LC4064V-10T44I - 64-Macrocell 3.3V CPLD | Lattice
LC4064V-10T44I

LC4064V-10T44I - 64-Macrocell 3.3V CPLD | Lattice

Lattice Semiconductor LC4064V-10T44I is an ispMACH 4000V complex programmable logic device with 64 macrocells, 30 user I/Os, a 3.3 V operating supply, and a TQFP-44 package. It belongs to the SuperFAST high-density PLD family and combines the architectures used in the ispLSI 2000 and ispMACH 4A families. The device supports in-system programming for 3.3 V, 2.5 V, and 1.8 V operation. A CPLD is a programmable logic device in the FPGA and CPLD hierarchy. Unlike a mask-programmed logic device, a CPLD retains its configuration in nonvolatile memory and can be reprogrammed during manufacturing, prototyping, or field updates. Its macrocell-based architecture provides deterministic combinational and registered logic implementation, making the LC4064V useful for control logic, interface translation, bus arbitration, and fixed-format signal processing. The -10 speed designation identifies a 125 MHz-class device in the ispMACH 4000V family, while the T44 suffix denotes the 44-pin TQFP package and the I suffix identifies the industrial temperature grade. The family information identifies 64 macrocells and a 3.3 V supply, with 30 available I/Os. These characteristics make the LC4064V-10T44I appropriate for compact industrial, communications, control, and legacy system designs requiring nonvolatile reconfiguration. The ispMACH 4000V architecture is intended for designs that need more logic density than small PAL devices without moving to a large FPGA. Its 125 MHz-class timing supports faster control paths than typical low-cost GAL and PAL logic. The TQFP-44 surface-mount package also provides a practical route for automated assembly and prototype fabrication where fine-pitch BGA packages would complicate inspection or rework. Typical applications include industrial control interfaces, peripheral bus controllers, status and sequencing logic, data-acquisition front ends, communications adapters, and embedded system glue logic. The 30-I/O configuration allows the device to bridge multiple digital interfaces while the nonvolatile configuration simplifies repeatable production and field reconfiguration. Board design must preserve the package footprint, programming interface, and supported I/O standards of the original LC4064V-10T44I. Verify signal voltage levels, unused pins, clock constraints, and programming voltage against the manufacturer datasheet. Because the exact pin names and complete electrical limits are not reproduced in the retrieved technical summaries, use the manufacturer pin-description table when assigning every package connection. This product record combines the exact manufacturer-family specifications, lifecycle information, drop-in cross-reference findings, and practical selection guidance. It also distinguishes confirmed TQFP-44 replacements from larger-package devices that are not direct PCB drop-ins, helping engineers evaluate replacements without confusing electrical equivalence with physical compatibility.

RFQ Contact
LC4064V-10T48I - 64-Macrocell 125MHz CPLD | Lattice
LC4064V-10T48I

LC4064V-10T48I - 64-Macrocell 125MHz CPLD | Lattice

Lattice Semiconductor LC4064V-10T48I is a 64-macrocell complex programmable logic device (CPLD) with a maximum system frequency of 125 MHz, a 10 ns propagation-delay grade, and a 48-pin TQFP package. It operates from a 3.0 V to 3.6 V core supply and supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable technology for interfacing with modern mixed-voltage systems. The industrial-temperature option is identified by the I suffix. A CPLD is a programmable-logic semiconductor that combines programmable AND/OR logic structures with nonvolatile configuration memory. In the product hierarchy, this device belongs to the ispMACH 4000V family of complex programmable logic devices. Compared with discrete programmable logic arrays, a CPLD provides denser integration, repeatable timing, and a unified configuration architecture. Its 64 macrocells make it suitable for consolidating control, interface, decode, and state-machine logic into one device. Key features include 64 macrocells organized into four logic blocks, 32 user I/O pins, a 125 MHz maximum frequency, and 10 ns propagation delay. The device also provides in-system programmability, allowing a programmed configuration to be updated through the system programming interface without removing the package from the PCB. Its 48-pin TQFP format is suitable for conventional surface-mount assembly and prototype or production boards requiring a moderate pin count. The ispMACH 4000 architecture is designed for predictable logic implementation, especially where several glue-logic functions must operate together at defined clock rates. The family documentation states that different density devices in the same package are designed to maintain the same pinout, supporting design migration between density options. This architecture makes the LC4064V useful when a design needs more integration than basic PAL devices while retaining nonvolatile, deterministic configuration behavior. Typical uses include industrial control and data-acquisition modules, communication interfaces, test and measurement equipment, embedded system peripheral consolidation, and compact instrumentation requiring programmable logic. The device can implement bus decoding, state machines, protocol bridges, counter and timer logic, and control functions while keeping the external processor focused on its primary application tasks. PCB design should preserve the device power and ground connectivity, provide the required bypass capacitance near the supply pins, and route programming signals away from high-speed switching nodes. Designers should also account for the 10 ns speed grade and the 125 MHz frequency ceiling when defining timing constraints, while confirming that every external interface operates within the selected I/O voltage range. This product page combines the device's electrical identity, package details, migration alternatives, comparison parameters, and practical implementation guidance. It also highlights the distinctions between speed grades and package variants so engineers can identify a genuine drop-in option without confusing a functional substitute with a PCB-compatible replacement.

RFQ Contact
LC4064V-25T44C - 64-Macro, 2.5ns CPLD | Lattice Semiconductor
LC4064V-25T44C

LC4064V-25T44C - 64-Macro, 2.5ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064V-25T44C is a 64-macro-cell complex programmable logic device in a 44-pin TQFP package, with a 2.5 ns indicated speed designation and support for 3.3 V, 2.5 V, and 1.8 V supply options. It belongs to the ispMACH 4000 family of SuperFAST high-density programmable logic devices and combines the ispLSI 2000 and ispMACH 4A architectures. A CPLD is a user-programmable digital logic device organized around interconnected macro cells, programmable interconnect resources, and I/O structures. Positioned as a complex programmable logic device, it bridges the gap between simple programmable logic arrays and larger FPGAs. This hierarchy places the LC4064V within programmable logic, then programmable-logic devices, and finally the broader semiconductor category. The device provides 64 macro cells, a 2.5 ns speed designation, and a 44-pin TQFP package. The ispMACH 4000 architecture supports in-system programmability, allowing a circuit to be configured through its programming interface without being removed from its assembled PCB. The family supports multiple nominal supply options of 3.3 V, 2.5 V, and 1.8 V, enabling designers to match the device to different logic-system power requirements. The SuperFAST designation reflects a design intended for higher logic performance than conventional CPLDs. Its macro-cell architecture supports the implementation of combinational and registered logic used for control, decoding, interface translation, address handling, and glue logic. The 44-pin TQFP package also provides a surface-mount option for compact programmable-logic assemblies, although the physical footprint and pin assignments must be checked against the manufacturer pin table before layout release. Typical uses include industrial control logic, peripheral-interface controllers, data-format converters, sequencers, and system-level control blocks. Because the part is obsolete according to distributor lifecycle information, it is most appropriate for maintenance of existing equipment, replication of an established board, or a design where the exact archived device and its programmed configuration are required. For new layouts, preserve the original power, ground, programming, and I/O routing conventions of the LC4064V-25T44C. Do not substitute a different package or a device with different I/O assignments without checking the pin description and programming configuration. Confirm the obsolete-part sourcing status and availability before committing production quantities. This page combines the device identity, lifecycle status, package information, pin-compatible family options, and application guidance to support obsolete CPLD maintenance and replacement planning. It also distinguishes documented electrical facts from parameters that require confirmation from the manufacturer datasheet before a new PCB or safety-related production release.

RFQ Contact
LC4064V-25T48C - 64-Macrocell 2.5ns CPLD | Lattice
LC4064V-25T48C

LC4064V-25T48C - 64-Macrocell 2.5ns CPLD | Lattice

The Lattice Semiconductor LC4064V-25T48C is an ispMACH 4000V complex programmable logic device with 64 macrocells, four logic blocks, up to 32 user I/O pins, and a 2.5 ns propagation-delay class, housed in a 48-pin TQFP surface-mount package. It supports 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD applications. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines interconnected programmable logic blocks with configurable I/O structures. The LC4064V series belongs to the ispMACH 4000V family, a high-density PLD family positioned between simple PAL/GAL devices and larger FPGAs. Its macrocell-based architecture provides deterministic combinational and registered logic, allowing control, interface, decoding, and glue-logic functions to be consolidated into a compact device. Key features include 64 macrocells, four logic blocks, and as many as 32 I/O pins. The -25 speed designation identifies a 2.5 ns propagation-delay class, while the family documentation identifies operation with 3.3 V, 2.5 V, and 1.8 V programming and I/O environments. In-system programmability allows the device to be configured from the target system rather than requiring a separate programming fixture. The 48-pin TQFP package supports conventional surface-mount assembly and PCB inspection. The ispMACH 4000 architecture uses interconnected macrocells and shared programmable interconnect resources to implement logic equations and sequential functions. Because the device is organized into macrocells rather than individually described gates, a design can be expressed in a hardware description language and compiled into a compact configuration image. Lattice documents that density devices within the same package can share a common pin arrangement, which supports design migration when capacity requirements change. Typical uses include industrial control logic, interface translation, bus decoding, peripheral glue logic, display sequencing, and embedded system control. The four logic blocks and 32 available I/O pins make the device suitable for designs that require a moderate number of parallel digital signals and moderately fast deterministic transitions. It is also appropriate for industrial equipment and legacy control systems where a small, low-density CPLD is preferable to a larger FPGA. Design with the LC4064V-25T48C by assigning each external signal to a documented package pin, observing the supply and I/O voltage limits, and confirming that every implemented function fits the available macrocell and logic-block resources. Include the manufacturer's recommended programming interface and decoupling arrangement, and validate timing against the external clock and interface requirements rather than relying on the speed grade alone. This product page combines package and family details, pin-compatible family alternatives, application guidance, and PCB-focused design notes. It is intended to help engineers assess whether the 64-macrocell, 32-I/O, 2.5 ns CPLD provides sufficient logic density, interface capacity, and timing performance for a specific embedded-control design.

RFQ Contact
LC4064V-5T100C - 3.3V 64-I/O SuperFAST CPLD | Lattice
LC4064V-5T100C

LC4064V-5T100C - 3.3V 64-I/O SuperFAST CPLD | Lattice

The Lattice Semiconductor LC4064V-5T100C is a 3.3 V, 64-I/O complex programmable logic device in a 100-pin TQFP package. It belongs to the SuperFAST high-density PLD family and supports in-system programming for 3.3 V, 2.5 V, and 1.8 V supply configurations. The device is designed to consolidate multiple PAL and GAL-style logic functions into one programmable device while preserving the familiar deterministic behavior expected by control and interface designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that sits between fixed-function logic and a field-programmable gate array. Its architecture provides a defined logic structure, predictable timing, and nonvolatile configuration retention. The LC4064V-5T100C offers 64 programmable I/O pins, making it useful where a design requires substantially more external glue logic than a small classic PLD can provide. Key device characteristics include a 3.3 V operating rail, a 3.0 V to 3.6 V internal supply range, and a commercial junction-temperature range from 0 °C to 90 °C. Its 100-pin TQFP package measures 14 mm by 14 mm and provides adequate routing density for buses, counters, state machines, address decoding, interface control, and general-purpose combinational or sequential logic. In-system programming allows a design to be updated without removing the device from the assembled board. The SuperFAST architecture targets high-density designs requiring more logic capacity and faster propagation performance than conventional low-density PLDs. Because configuration is stored in nonvolatile memory, the LC4064V-5T100C starts with its programmed logic immediately after power is applied and does not require an external configuration loader. This simplifies board design compared with SRAM-based programmable logic that depends on a host processor or dedicated configuration source. Typical applications include industrial control and automation, instrumentation, peripheral controllers, legacy bus-interface consolidation, test and measurement equipment, and embedded system support logic. It can also serve as a companion controller beside microcontrollers, FPGAs, or memory devices when several fixed timing-critical functions must be implemented independently. When designing a PCB around this device, reserve all 100 package positions for signal routing even though only 64 I/O functions are specified, and follow the manufacturer's pin-description table for power, ground, configuration, and dedicated-function assignments. Confirm the intended voltage configuration, decoupling requirements, and unused-pin treatment against the manufacturer datasheet before releasing the layout. This page combines the device's core electrical and packaging characteristics with a practical comparison against pin-compatible Lattice SuperFAST options, application guidance, and PCB-focused design notes. These resources help engineers identify meaningful differences in speed grade, voltage support, and temperature grade without treating package compatibility as proof of functional interchangeability.

RFQ Contact
LC4064V-5T100I - 64-Macro CPLD | Lattice Semiconductor
LC4064V-5T100I

LC4064V-5T100I - 64-Macro CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064V-5T100I is a 64-macro-cell, in-system-programmable complex programmable logic device in a 100-pin TQFP package. It belongs to the ispMACH 4000V family and supports 3.3 V, 2.5 V, and 1.8 V supply operation according to the family documentation. The -5 speed designation identifies the fast system-performance grade, while the I suffix identifies the industrial-temperature option. A CPLD, or complex programmable logic device, is a user-programmable digital semiconductor that combines programmable logic blocks, programmable interconnect, and input/output resources into a compact logic solution. In the product hierarchy, the LC4064V-5T100I is a CPLD, a form of programmable logic, within the broader FPGA and CPLD category. Its 64 macro cells provide more integration than basic PAL or GAL devices while retaining nonvolatile configuration and predictable timing. The principal feature is in-system programmability, allowing the device to be configured through its programming interface without removal from the circuit. The family supports 3.3 V, 2.5 V, and 1.8 V operation, allowing the same logic architecture to serve multiple supply environments. Its 100-pin TQFP package provides a substantial number of user I/O resources for interfacing external memories, control buses, data converters, and industrial peripherals. The ispMACH 4000V architecture blends the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. In a typical design, the CPLD performs deterministic control, protocol conversion, address decoding, interface bridging, or launch-data and capture-data functions. Its macro-cell organization is appropriate for compact glue logic around processors, FPGAs, memories, and communication peripherals rather than large DSP or high-speed parallel-processing workloads. Typical uses include industrial control and factory automation, network-interface logic, instrumentation, embedded system support, and general-purpose product control. The 64 macro cells can consolidate multiple Boolean functions and state-machine sections into one device. Designers should match the design to the device architecture, available I/O, supported supply voltage, timing constraints, and system programming requirements before assigning pins or compiling the final logic. The principal design considerations are power-supply integrity, correct JTAG or serial programming connections, disciplined I/O assignment, and verification of timing constraints. The I suffix supports industrial-temperature operation, but the complete device should still be evaluated against its absolute maximum and recommended operating conditions in the manufacturer datasheet. Board design should also account for signal-integrity requirements associated with high-speed clock and control nets. This page organizes the device family information, lifecycle status, drop-in replacement candidates, package details, sourcing options, and practical design guidance. It is intended to help engineers identify whether the LC4064V-5T100I matches an existing ispMACH 4000V design before requesting a formal quotation or reviewing the complete manufacturer documentation.

RFQ Contact
LC4064V-5T44C - 5 ns 64-Macrocelle ISP CPLD | Lattice
LC4064V-5T44C

LC4064V-5T44C - 5 ns 64-Macrocelle ISP CPLD | Lattice

The Lattice Semiconductor LC4064V-5T44C is a 64-macrocelle in-system-programmable complex programmable logic device with a 5 ns propagation delay, 30 user I/O pins, four logic array blocks, and a 44-TQFP package measuring 10 x 10 mm. The device supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD operation according to the supplied manufacturer-family data. A CPLD, or complex programmable logic device, is a user-programmable digital semiconductor that belongs to the FPGA and programmable-logic hierarchy. It combines macrocell-based logic, programmable interconnect, user I/O, and nonvolatile configuration memory in a deterministic architecture. Compared with a soft-logic implementation inside an FPGA, a CPLD generally provides a simpler design flow and predictable timing for compact control, interface, and glue-logic functions. The LC4064V-5T44C provides four logic array blocks, 64 macrocells, and 30 user I/O pins. Its headline 5 ns propagation delay supports designs requiring faster logic response than slower speed grades. The family description identifies in-system programmability for 3.3 V, 2.5 V, and 1.8 V programming environments, allowing configuration or design updates without removing the device from its assembled circuit board. The 44-TQFP surface-mount package exposes the device's programmable I/O and power connections on a compact 10 x 10 mm footprint. Pin assignments, configuration behavior, and electrical limits must be taken from the LC4064V datasheet rather than inferred from the distributor category text. The supplied web results identify the -5 speed grade, 44-pin package, 30 I/O pins, four logic array blocks, 64 macrocells, 5 ns propagation delay, and 3 V to 3.6 V internal supply voltage. Typical uses include peripheral-interface bridging, industrial control logic, bus-interface adaptation, data-format conversion, embedded system control, and general-purpose glue logic. These applications benefit from the device's combination of 64 macrocells, 30 user I/O, in-system programming, and a short 5 ns propagation delay. Designers should still evaluate timing across all paths and confirm signal standards and voltage compatibility with the complete design. For implementation, place the device close to the signals it serves, provide stable supply bypassing, and follow the datasheet's recommended programming interface and decoupling layout. A TQFP package has exposed leads on all four sides, so fanout can still constrain routing beneath the package. Validate the final design with the manufacturer's timing models and verify the selected system interface and I/O voltage requirements. This page consolidates the supplied distributor and cross-reference results with package-level application guidance, verified family specifications, and an explicit distinction between electrically similar alternatives and confirmed drop-in choices. It also identifies unavailable pricing, lifecycle, and detailed pin-assignment data rather than inferring those values from the MPN.

RFQ Contact
LC4064V-5T44I - 64-Macrocell 3.3V CPLD | Lattice Semiconductor
LC4064V-5T44I

LC4064V-5T44I - 64-Macrocell 3.3V CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064V-5T44I is an in-system-programmable CPLD with 64 macrocells, 30 user I/Os, a 3.3 V supply, and a 5.0 ns speed grade in a 44-pin TQFP package. It belongs to the ispMACH 4000V SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V operation according to the manufacturer datasheet. The LC4064V-5T44I is identified as an industrial-grade device with a stated system frequency of 227.27 MHz. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines macrocell-based combinational and sequential logic with a nonvolatile configuration architecture. Within the broader hierarchy, a CPLD is a programmable-logic device, an FPGA alternative, and a semiconductor. Compared with a small FPGA, a CPLD generally offers predictable timing and in-system programmability, making it useful for control logic, interface conditioning, bus arbitration, and fixed logic consolidation. The verified device information identifies 64 macrocells, 30 user I/Os, 3.3 V operation, 5.0 ns speed grading, a 227.27 MHz maximum frequency, 44-pin TQFP construction, and industrial-grade temperature positioning. Its in-system programming capability allows a board manufacturer to load or update the logic configuration during manufacturing, test, or field operation without removing the device from the circuit. The LC4064V-5T44I is part of Lattice Semiconductor's SuperFAST high-density ispMACH 4000V family. The 5.0 ns grade is intended for designs requiring faster logic propagation than slower members of the family, while the 64 macrocells provide a moderate capacity for consolidating multiple fixed functions into one programmable device. The 30 available user I/Os support connections to external memories, control signals, communications peripherals, and mixed-signal system blocks. Typical uses include industrial controller logic, data-acquisition interfaces, instrumentation, embedded system glue logic, protocol conversion, and legacy bus-interface consolidation. Its fixed-capacity architecture and in-system programmability are especially useful when a design must deliver deterministic behavior without the resource overhead and configuration complexity of a larger FPGA. A critical design consideration is the 44-pin TQFP footprint and its 30 user I/O complement. The PCB must match the manufacturer's land pattern, preserve adequate clearance around all leads, and route high-speed or sensitive signals away from noisy switching nodes. Because verified pricing and detailed electrical limits were not present in the supplied records, designers should confirm the complete manufacturer datasheet and current distributor inventory before release. This page consolidates verified distributor and datasheet-search records, same-family drop-in alternatives, technical comparisons, and practical selection guidance. It distinguishes confirmed device facts from missing electrical, pinout, pricing, and lifecycle details so that engineers can make a qualified sourcing or design decision without relying on unverified assumptions.

RFQ Contact
LC4064V-5T48C - 64-Macro-Cell 227 MHz CPLD | Lattice
LC4064V-5T48C

LC4064V-5T48C - 64-Macro-Cell 227 MHz CPLD | Lattice

The Lattice Semiconductor LC4064V-5T48C is an in-system-programmable CPLD with 64 macro cells, 32 I/O, a 227 MHz maximum operating frequency, and a 48-pin TQFP package. It belongs to the ispMACH 4000V family of SuperFAST high-density programmable logic devices and supports 3.3 V, 2.5 V, and 1.8 V supply configurations. The -5 speed designation corresponds to a 5 ns class of device, while the family specification identifies a maximum system frequency of 227 MHz. A CPLD, or complex programmable logic device, is a programmable-logic semiconductor that combines configurable logic blocks, programmable interconnect, and I/O resources. In the product hierarchy, a CPLD is a programmable logic device, a form of FPGA & CPLD semiconductor, and a practical alternative to a small gate array when deterministic logic, nonvolatile configuration, and in-system reprogrammability are more important than very high logic density. The LC4064V family targets control, interface, glue-logic, and signal-routing functions. Key features include 64 macro cells, 32 user I/O, in-system programmability, and a nominal 5 ns speed grade. Its 3.3 V, 2.5 V, and 1.8 V operating options provide flexibility across legacy industrial and embedded control systems. The 48-pin TQFP package also supports conventional PCB assembly and inspection processes. The source data identifies the device as a SuperFAST high-density PLD and part of the ispMACH 4000V family. Technically, the LC4064V-5T48C is best understood as a compact, nonvolatile logic platform rather than a general-purpose processor. Macro cells implement registered or combinational logic, while programmable interconnect routes signals among the cell array and package pins. In-system programming allows the same board to be configured or updated without removing the device, provided the associated programming interface, power rails, and signal conditions meet the device requirements. Typical uses include industrial control interfaces, peripheral bus decoding, legacy display and memory glue logic, automotive or communications equipment, and embedded system sequencing. The 32-I/O configuration is suitable for moderate pin-count interfaces rather than high-channel-count parallel buses. Engineers should account for available macro cells, I/O standards, timing constraints, and programming voltage when designing around the device. The primary design consideration is availability: available sources label LC4064V-5T48C as obsolete, so new production designs should confirm lifecycle status before committing to a long-term program. For an existing PCB, the 48-pin TQFP footprint and -5 speed grade must be preserved, and any replacement should be checked for identical pin functions, voltage support, macro-cell architecture, and timing behavior. This page consolidates verified distributor specifications, family-level technical details, source-backed replacement candidates, pricing availability, and practical migration guidance. It separates confirmed LC4064V-5T48C data from parameters that require confirmation in the manufacturer datasheet, helping engineers assess fit, sourcing risk, and drop-in replacement feasibility more efficiently.

RFQ Contact
LC4064V-5T48I - SuperFAST High-Density PLD | Lattice
LC4064V-5T48I

LC4064V-5T48I - SuperFAST High-Density PLD | Lattice

Lattice Semiconductor LC4064V-5T48I is a SuperFAST high-density programmable logic device in the ispMACH 4000 family, combining the ispLSI 2000 and ispMACH 4A architectures. The device is identified as a 3.3V, 2.5V, and 1.8V in-system programmable CPLD, allowing it to support multiple supply-voltage arrangements in compact embedded systems. Its 48-pin TQFP package and industrial-grade ordering code make it suitable for designs requiring deterministic programmable control, signal conditioning, interface bridging, and logic consolidation. A complex programmable logic device is a programmable semiconductor that combines multiple programmable logic blocks, interconnect resources, and input/output structures into one configurable integrated circuit. Within the device hierarchy, a CPLD is a programmable logic device, a semiconductor, and an alternative to a small FPGA or discrete gate-array implementation. LC4064V-5T48I provides in-system programmability, allowing a design to be programmed after PCB assembly when a suitable programming path and device support are available. The verified device family information identifies the LC4064V as a high-density PLD offering a flexible combination of logic capacity, low power, and performance. The part suffix denotes a -5 speed grade and an industrial temperature option, while the 48 suffix identifies the 48-pin package configuration. These details make the MPN suitable for industrial control logic, data acquisition interfaces, communication control, and embedded system support functions where a consolidated programmable device can reduce board complexity. The LC4064V family supports 3.3V, 2.5V, and 1.8V operation. This voltage flexibility is important when a board uses multiple logic voltage domains, although designers must still observe the exact pin, voltage, timing, and power requirements documented for the selected device and package. The -5 grade should be selected when the design requires the family’s faster timing grade rather than a slower speed option. Typical applications include programmable I/O expansion, bus-interface control, industrial machine sequencing, communication protocol handling, and general-purpose glue logic. The 48-pin TQFP package also provides a practical surface-mount footprint for manufacturing and allows access to a larger number of package pins than smaller CPLD packages. Because the verified data does not provide detailed logic-block counts, I/O counts, timing tables, or exact pin names, those values should be confirmed in the manufacturer datasheet before final schematic or PCB sign-off. Designers should verify the device’s complete pinout, power-supply sequencing, decoupling requirements, and programming interface against the manufacturer documentation. The TQFP-48 package should be routed with adequate thermal and solder-joint consideration, and unused inputs should be handled according to the device recommendations. This page combines the verified family description, sourcing information, same-package alternatives, and practical selection guidance; it does not replace the complete electrical and timing data in the manufacturer datasheet.

RFQ Contact
LC4064V-75T44C - 64-Macro Cell 3.3V CPLD | Lattice
LC4064V-75T44C

LC4064V-75T44C - 64-Macro Cell 3.3V CPLD | Lattice

Lattice Semiconductor LC4064V-75T44C is a 3.3 V, 64-macro-cell complex programmable logic device in a 44-pin TQFP package. It belongs to the ispMACH 4000 high-density PLD family and provides 30 user I/O, a 7.5 ns device speed grade, and operation from a 1.8 V, 2.5 V, or 3.3 V supply. The device is intended for designs requiring nonvolatile, in-system programmable logic for interface, control, and glue-logic functions. A CPLD is a programmable logic device organized around macro cells and a programmable interconnect. Compared with a mask-programmed logic implementation, a CPLD allows a design to be revised by replacing its configuration data rather than manufacturing a new ASIC. Within the broader hierarchy, the LC4064V-75T44C is a complex programmable logic device, which is a semiconductor within the programmable-logic-device family. It is distinct from microcontrollers because its logic behavior is primarily established through a user configuration rather than software execution. The 64-macro-cell architecture supports consolidation of multiple fixed-function gates, counters, state machines, address decoding, and interface control into one programmable device. Its 30 I/O, 3.3 V operating supply, and 44-pin TQFP package are useful for compact control boards, industrial automation equipment, test systems, and legacy peripheral expansion. The -75 designation identifies a 7.5 ns speed grade in the manufacturer naming system, while the 44 suffix identifies the 44-pin package option. The ispMACH 4000 architecture combines the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. Family documentation states that devices of different densities in the same package retain the same pinout, enabling migration within the family. This architectural consistency supports design reuse, although firmware, timing constraints, and device-specific functions still require validation before changing density or grade. Typical uses include bus-interface control, data capture and formatting, industrial sequence control, instrumentation, test-equipment glue logic, and general-purpose peripheral interfacing. In these applications, the device can consolidate logic that would otherwise require multiple GAL, PAL, or small CPLD parts. Nonvolatile in-system programming also supports production configuration, field updates, and maintenance without removing the device from its circuit. Designers should use the manufacturer pin table and device-programmer instructions when assigning package pins and creating a board footprint. The 44-pin TQFP package requires adequate lead clearance, careful solder-paste control, and inspection of fine-pitch leads. Power rails should be decoupled close to the device, while unused inputs should be tied to a defined logic level. Configuration pins and programming-interface connections should follow the recommended schematic and termination guidance. This product page combines the device identity, package information, documented electrical characteristics, source links, engineering application guidance, and a cautious drop-in comparison. It is designed to help engineers assess LC4064V-75T44C suitability while preserving the distinction between a verified footprint match and a replacement that still requires configuration, timing, and lifecycle review.

RFQ Contact
LC4064V-75T44E - 7.5ns 64-Macrocell CPLD | Lattice
LC4064V-75T44E

LC4064V-75T44E - 7.5ns 64-Macrocell CPLD | Lattice

The Lattice Semiconductor LC4064V-75T44E is an in-system-programmable SuperFAST high-density CPLD with 64 macrocells, 7.5 ns propagation delay, and a 44-pin TQFP package. It supports operation with 3.3 V, 2.5 V, and 1.8 V supply levels, combining reconfigurable logic integration with a compact surface-mount footprint. A CPLD, or complex programmable logic device, is a user-programmable semiconductor used to implement fixed digital logic functions through a nonvolatile configuration architecture. Its hierarchy includes CPLD, programmable logic device, digital logic IC, and semiconductor. Compared with a discrete gate-array design, a CPLD allows logic behavior to be changed without replacing the device and can consolidate multiple counter, decode, interface, and control functions into one package. The LC4064V-75T44E combines a 7.5 ns speed grade with a 64-macrocell device configuration. Its in-system programming capability supports configuration workflows that simplify board bring-up, production programming, and field updates. Operation from 3.3 V, 2.5 V, or 1.8 V provides design flexibility across mixed-voltage systems, while the 44-pin TQFP package offers a conventional gull-wing surface-mount footprint suitable for automated assembly and prototype boards. The device belongs to Lattice Semiconductor's SuperFAST high-density PLD family, which combines an ispLSI 2000-style architecture with ispMACH 4A characteristics. The 64-macrocell resource supports consolidated control logic for communications, industrial interfaces, test equipment, embedded systems, and general-purpose digital products. The 7.5 ns propagation-delay designation identifies the performance grade used when evaluating timing paths in the target design. Typical uses include peripheral-interface control, bus decoding, counter and timer logic, display and system control, instrumentation, and factory automation. In each application, the same programmable device can consolidate fixed digital functions that would otherwise require multiple gates, counters, multiplexers, and glue logic. Its 44-pin TQFP package also makes it suitable for designs that require moderate I/O density without moving to a large BGA footprint. PCB design should preserve short configuration and logic paths, provide a stable supply connection, and include the decoupling and programming-interface arrangements specified by the Lattice Semiconductor datasheet. Before release, validate timing, unused I/O behavior, programming voltage, power-up conditions, and signal integrity against the complete design. Do not substitute a device with a different pin count or speed grade without reviewing its pinout and timing characteristics. This page organizes the LC4064V-75T44E specifications, documented drop-in alternatives, comparison criteria, and practical implementation guidance. It helps engineers evaluate the 64-macrocell, 7.5 ns, 44-pin TQFP device alongside related LC4064V options while preserving package compatibility and separating electrically equivalent choices from redesign-level alternatives.

RFQ Contact
LC4064V-75T44I - 64-Macro 168MHz CPLD | Lattice Semiconductor
LC4064V-75T44I

LC4064V-75T44I - 64-Macro 168MHz CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064V-75T44I is an ispMACH 4000V complex programmable logic device with 64 macro cells, a 168 MHz maximum system frequency, and a 44-pin TQFP package. The device belongs to the in-system-programmable SuperFAST CPLD family and supports 3.3 V, 2.5 V, and 1.8 V supply configurations. Its industrial-temperature grade is specified for operation from -40°C to +105°C. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and I/O resources into one integrated logic solution. In the broader semiconductor hierarchy, a CPLD occupies the position between discrete gate logic and more complex programmable devices such as FPGAs. It is generally used when a design requires rapid configuration, deterministic combinational and registered logic, and a compact implementation without loading a large FPGA design. The LC4064V-75T44I provides 64 macro cells in its ispMACH 4000V family. The architecture combines characteristics associated with Lattice ispLSI 2000 and ispMACH 4A devices. Its SuperFAST designation reflects the family's emphasis on high-speed programmable logic, while the -75 speed grade corresponds to the 168 MHz operating-frequency listing. In-system programmability allows a board designer to configure the CPLD through the programming interface rather than relying on a mask-programmed device. The 44-pin TQFP construction provides a compact surface-mount platform with 0.8 mm pitch and 30 user I/O according to the device listing. Supporting 3.3 V, 2.5 V, and 1.8 V operation gives designers flexibility across mixed-voltage systems. The broad -40°C to +105°C industrial range supports industrial automation, communications equipment, embedded control, and test systems where commercial-temperature variants would be insufficient. Typical applications include peripheral interfacing, bus decoding, state-machine control, signal conditioning, data-format conversion, and glue logic for industrial or communications systems. The LC4064V-75T44I is particularly suitable when the required logic fits within 64 macro cells but needs a faster timing target than conventional low-density PLD families. It can also consolidate several discrete logic functions into one programmable package. PCB design should preserve a clean programming interface, route clock and high-speed nets with controlled impedance where required, and decouple each applicable supply rail close to the device. The TQFP package requires careful lead inspection after soldering because its fine 0.8 mm pitch can complicate visual inspection. Confirm the pinout and power configuration against the manufacturer datasheet before finalizing the board layout. This product page organizes the device's principal specifications, verified sourcing information, package details, and drop-in alternatives for faster engineering evaluation. It also highlights replacement constraints and application-specific considerations that help teams assess the LC4064V-75T44I before committing to a PCB or production program.

RFQ Contact
LC4064V-75T48C - 64-Macrocell 7.5 ns CPLD | Lattice
LC4064V-75T48C

LC4064V-75T48C - 64-Macrocell 7.5 ns CPLD | Lattice

The Lattice Semiconductor LC4064V-75T48C is an in-system-programmable complex programmable logic device with 64 macrocells, a maximum propagation delay of 7.5 ns, and 32 user I/O pins. It is supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device belongs to the ispMACH 4000V family, a high-density PLD architecture combining in-system programmability with support for 1.8 V, 2.5 V, and 3.3 V system levels. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that implements fixed logic functions through configurable internal macrocell and interconnect resources. Its position in the product hierarchy is CPLD → programmable logic device → programmable logic IC → semiconductor. Compared with an FPGA, a CPLD generally offers deterministic nonvolatile configuration and straightforward timing behavior, making it useful for control logic, interface conditioning, bus arbitration, and compact glue-logic designs. The LC4064V provides 64 macrocells, four logic elements, and 32 user I/O pins. Its 7.5 ns maximum propagation-delay designation supports high-speed control paths, while the in-system-programmable architecture allows the finished board to be configured or updated without removing the device. The 48-TQFP surface-mount package also offers a practical pin count for boards requiring both external interfaces and internal control logic. This device uses the ispMACH 4000V architecture, which Lattice describes as a blend of the ispLSI 2000 and ispMACH 4A architectures. The architecture is intended for designs requiring predictable logic implementation and migration among density devices that share a package pinout. Although the 400 MHz figure associated with a related family member may be used to characterize the product family, individual signal timing should be evaluated from the complete device timing tables rather than inferred from that frequency alone. Typical uses include peripheral-interface bridging, data-format conversion, industrial control logic, communications sequencing, test-interface multiplexing, and general-purpose glue logic. The 32 available user I/O pins make the device appropriate for designs combining multiple bus interfaces or discrete control signals. Because the logic is nonvolatile and programmable, it is particularly useful where deterministic boot behavior and field reconfiguration are valuable. PCB design should preserve the manufacturer's recommended power, ground, clock, and programming-signal arrangements. Decoupling capacitors should be placed close to the supply pins, programming access should remain unobstructed, and unused inputs should be handled according to the device's stated configuration rules. Signal-routing choices should also account for package escape delays and the external timing budget of each connected peripheral. This product page combines the device's 64-macrocell architecture, 7.5 ns timing designation, 32 user I/O availability, 48-TQFP footprint, family-level alternatives, and practical migration considerations. It also highlights the distinction between an exact MPN replacement and a functionally similar family member whose operating-temperature or supply-level details still require engineering review.

RFQ Contact
LC4064V-75T48E - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor
LC4064V-75T48E

LC4064V-75T48E - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064V-75T48E is a 64-macrocell SuperFAST complex programmable logic device with a 7.5 ns propagation delay, 168 MHz maximum system frequency, and a 48-pin TQFP package. It belongs to the ispMACH 4000V family and supports 3.3 V, 2.5 V, and 1.8 V supply operation. The device provides 30 user I/O pins and combines programmable logic density with in-system programmability for compact embedded control designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple logic arrays into one configurable integrated circuit. In the product hierarchy, a CPLD sits between discrete gates and more complex programmable logic devices. Its internally connected macrocells and global routing make it useful when a design needs deterministic timing, moderate logic density, and a relatively simple configuration workflow compared with a field-programmable gate array. The LC4064V-75T48E provides 64 macrocells, 30 user I/O pins, and a 7.5 ns propagation-delay grade. Its 168 MHz maximum system-frequency rating supports control, interface, and glue-logic functions operating from a 3.3 V, 2.5 V, or 1.8 V supply. In-system programming allows the configuration device to be loaded through its programming interface, helping support prototype updates and production programming without relying on a separate one-time-programmable configuration memory. The ispMACH 4000 architecture combines the ispLSI 2000 and ispMACH 4A design approaches, as described in the manufacturer family documentation. Its architecture supports predictable signal propagation and is intended for designs that need more integration than discrete programmable logic, while retaining a lower-complexity alternative to an FPGA. The 48-pin TQFP package also exposes a practical mix of user I/O for board-level implementations. Typical applications include industrial control and automation, embedded peripheral interfacing, display-control logic, communication-interface support, and compact consumer or communications equipment. The 64-macrocell capacity can consolidate address decoding, state-machine logic, counters, latches, and interface control into one device. The 30 user I/O count is especially useful for designs that need moderate board-level connectivity without moving to a larger package. PCB design should preserve clean power and ground distribution around the TQFP leads, with decoupling placed close to the supply pins. Configuration and I/O timing should be reviewed against the actual clock, load, and voltage conditions. Because the exact pin assignments and electrical limits must be matched to the configuration file, designers should use the pin table and device guidance in the manufacturer family documentation before assigning board signals. This product record combines the device architecture, package information, engineering selection criteria, and application-oriented design guidance with a focused comparison against same-package family options. It is structured to help engineers identify whether the 7.5 ns device grade, 64 macrocells, 30 I/O pins, and 48-pin TQFP implementation match a specific logic-design requirement.

RFQ Contact
LC4064V-75T48I - 64-Macro-Cell 168MHz CPLD | Lattice
LC4064V-75T48I

LC4064V-75T48I - 64-Macro-Cell 168MHz CPLD | Lattice

The Lattice Semiconductor LC4064V-75T48I is a 64-macro-cell CPLD based on the ispMACH 4000V architecture, with a listed system frequency of 168 MHz, 3.3 V operation, and a 48-pin TQFP package. It combines programmable logic blocks, in-system programmability, and low-voltage I/O support in a surface-mount package suited to compact control and interface designs. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that sits between fixed-function logic and larger FPGAs. Its interconnected macrocells provide deterministic routing for control logic, interface adaptation, state machines, address decoding, and signal conditioning. The ispMACH 4000V family is designed for applications where a modest logic capacity, straightforward programming, and compact packaging are more important than the very high resource counts of an FPGA. The LC4064V-75T48I provides 64 macrocells, a 168 MHz listed frequency, and a 3.3 V core supply. Its family supports 3.3 V, 2.5 V, and 1.8 V in-system programming environments, allowing the device to fit mixed-voltage systems with appropriate interface design. The -75 designation identifies the device speed grade, while the I suffix denotes the industrial-temperature ordering option used in this product family. The 48-pin TQFP package offers a conventional surface-mount footprint with perimeter leads on a 0.5 mm pitch. Its relatively small pin count is useful when the design requires several I/O paths but does not need the larger pin budgets associated with higher-capacity PLDs. In-system programming helps simplify manufacturing, field updates, and prototype bring-up because the configuration interface can operate within the system rather than requiring a separate dedicated programmer. Typical uses include industrial control, instrumentation, communication interfaces, legacy peripheral emulation, and embedded system glue logic. The 64-macro-cell device can consolidate several gate-level functions into one configurable component, reducing board area and avoiding the expense of implementing equivalent logic with numerous fixed gate arrays. It is particularly suitable for designs requiring modest interconnect complexity and repeatable, deterministic behavior. Layout should preserve adequate decoupling at the supply pins, keep programming-interface routing away from fast or noisy analog-adjacent nets, and follow the manufacturer's pinout and recommended power-architecture guidance. Logic timing, output loading, and supply integrity must be checked against the actual clock and I/O requirements. The manufacturer datasheet remains the controlling reference for pin assignment, absolute maximum ratings, AC timing, and programming procedures. This page combines the device's architecture and package information with practical replacement guidance, application context, and a parameter comparison for engineers evaluating the LC4064V-75T48I against same-package Lattice variants and pin-compatible CPLD options.

RFQ Contact
LC4064ZC-5M56C - 64-Macro CPLD, 400 MHz, 56-CSBGA | Lattice
LC4064ZC-5M56C

LC4064ZC-5M56C - 64-Macro CPLD, 400 MHz, 56-CSBGA | Lattice

Lattice Semiconductor LC4064ZC-5M56C is a 64-macro-cell complex programmable logic device with a maximum operating frequency of 400 MHz, a 2.5 ns propagation delay, and 32 user I/Os in a 56-ball CSBGA package. It belongs to the ispMACH 4000Z family of CMOS CPLDs and supports in-system programming from 3.3 V, 2.5 V, or 1.8 V supply levels. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and dedicated I/O resources into one integrated device. Within the broader hierarchy, a CPLD is a digital logic IC and a form of programmable logic device that sits between simple programmable array logic and field-programmable gate arrays. Its nonvolatile configuration, deterministic signal paths, and in-system programmability make it useful for control logic, bus arbitration, interface translation, and fixed data-processing functions. The LC4064ZC-5M56C provides up to four global signals according to the family documentation and combines high-density logic with fast timing. Its 400 MHz maximum operating frequency supports high-speed control paths, while the 2.5 ns propagation delay provides deterministic response for registered logic. Thirty-two user I/Os provide connections to external buses, memory, converters, and peripheral devices, while the 56-CSBGA package supports dense board layouts. The -5 speed designation corresponds to the 2.5 ns propagation-delay grade shown in the manufacturer documentation. CMOS implementation and support for 1.8 V, 2.5 V, and 3.3 V operation allow the device to interface with multiple logic voltage domains. In-system programming simplifies configuration updates and allows programming through the same board used during operation, reducing the need for dedicated programming connectors or separate fixture arrangements. Typical uses include industrial control and data-acquisition systems, network interface and protocol-handling logic, embedded bus arbitration, display or memory-controller glue logic, and compact embedded control systems. The 32 I/Os are particularly useful when a design needs several address, control, and serial-interface signals without moving to a larger programmable-logic package. The CSBGA package also requires careful PCB escape routing and inspection for assembled boards. Design work should begin with the Lattice Semiconductor ispMACH 4000Z pin table and package drawing. Keep power and ground connections routed according to the manufacturer's recommended layout, provide suitable decoupling at every supply connection, and use a programming interface that matches the selected ispMACH configuration method. Validate BGA assembly and inspection requirements with the board manufacturer before releasing the PCB. This product page combines device specifications, package and programming guidance, lifecycle information, comparison data, and practical implementation notes. It also documents the limited set of identified package-compatible alternatives and explains where timing, temperature grade, or device-identification differences must be checked before replacement.

RFQ Contact
LC4064ZC-5M56I - 64-Macrocell 200MHz CPLD | Lattice Semiconductor
LC4064ZC-5M56I

LC4064ZC-5M56I - 64-Macrocell 200MHz CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064ZC-5M56I is an ispMACH 4000Z-family CPLD with 64 macrocells, 4 logic elements, a 200 MHz operating frequency, 1.8 V operation, and a 56-pin CSBGA package. It is designed for in-system programmable logic where compact pin density, deterministic programmable logic, and mixed 1.8 V, 2.5 V, or 3.3 V supply options are useful. The device provides a combination of programmable logic resources and a high-density ball-grid-array footprint for space-constrained embedded systems. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines AND/OR-style logic structures with nonvolatile configuration memory. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a field-programmable gate array. Lattice’s ispMACH 4000Z family is positioned for designs requiring more logic density and higher performance than small legacy GAL devices while retaining in-system programmability. The LC4064ZC-5M56I provides 64 macrocells and 4 logic elements according to the manufacturer-product information, with a listed maximum operating frequency of 200 MHz. Its 56-CSBGA package uses a 6 mm x 6 mm ball-grid-array format. The device is also identified as supporting 1.8 V, 2.5 V, and 3.3 V supply configurations, allowing it to sit within mixed-voltage embedded systems when its power architecture and I/O rules permit. The principal design benefit is consolidated programmable logic in a compact package. The 56-pin CSBGA footprint can reduce board area compared with larger leaded or plastic packages, but it requires careful escape routing, fine-pitch assembly capability, and inspection during PCB fabrication. Because the LC4064ZC-5M56I is a CPLD rather than an FPGA, it is generally considered for glue-logic, control, decoding, interface, and fixed datapath functions where deterministic configuration and compact implementation are important. Typical uses include industrial control logic, data-acquisition interfaces, communication protocol handling, embedded system arbitration, and compact instrumentation. The 200 MHz frequency rating makes it suitable for moderate-speed control and datapath logic, while the 64-macrocell resource count supports multiple parallel logic blocks. Designers should confirm the exact timing budget, I/O standards, pin assignments, and configuration requirements against the manufacturer datasheet before releasing a PCB. For implementation, plan the power rails, decoupling, programming interface, JTAG access, and all 56 BGA lands during schematic capture. Keep sensitive or high-speed routes away from programming and configuration activity where practical, and validate the assembled board with continuity and X-ray inspection because hidden BGA solder joints cannot be visually inspected from the top side. This page combines the exact device identifiers, package information, search-suggested documentation queries, and engineering guidance for LC4064ZC datasheet, pinout, replacement, and application-circuit planning.

RFQ Contact