Products (44,000+)

MC9S08RG32CFJ - 8-Bit 8MHz 32KB MCU | NXP | Industrial Control
MC9S08RG32CFJ

MC9S08RG32CFJ - 8-Bit 8MHz 32KB MCU | NXP | Industrial Control

The NXP Semiconductors MC9S08RG32CFJ is an 8-bit HCS08 S08 microcontroller operating at up to 8 MHz, with 32 KB of embedded flash memory, in a 32-LQFP 7 mm × 7 mm package. The verified distributor listing identifies 2 KB of RAM, a 1.8 V to 3.6 V supply range, and an industrial temperature grade. These characteristics place the device in the MCU → embedded microcontroller → 8-bit microcontroller hierarchy for compact control, sensing, and actuator-control systems. An 8-bit S08 microcontroller integrates a CPU core, program flash, RAM, digital peripherals, and communication interfaces on one device. It is suited to products where modest processing throughput, deterministic control, and compact pin count are more important than high-bandwidth computation. The MC9S08RG32CFJ's 32 KB flash provides room for embedded application code, while its 2 KB RAM supports working state, buffers, stacks, and peripheral data. The 1.8 V to 3.6 V operating range supports low-voltage embedded systems. Key verified features include an 8 MHz maximum operating frequency, 32 KB of 32K × 8 flash, 2 KB RAM, a 32-pin LQFP package, and a gull-wing terminal form. Partstack classifies the package as square LQFP with 32 terminals and labels the temperature grade as industrial. LCSC also lists the device as RoHS-compatible, while the supplied data does not provide verified REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status. The part belongs to the HCS08 S08 family and is presented by distributors under both Freescale Semiconductor and NXP Semiconductors naming. That history matters during sourcing and documentation review because the MC9S08RG32CFJ may appear under either brand context, but the target orderable MPN remains MC9S08RG32CFJ. Its 8-bit architecture is appropriate for motor controls, building controls, appliance controllers, sensor nodes, instrumentation, and compact industrial modules. Designers should verify the complete pinout, peripheral mix, electrical limits, reset behavior, clocking, programming interface, and memory map against the manufacturer datasheet before schematic capture or firmware migration. The verified data does not include individual port assignments, interrupt-vector details, analog channels, timing ranges, absolute maximum ratings, or package thermal resistance, so those values must not be inferred from the distributor summaries. This product page consolidates the verified 8 MHz, 32 KB flash, 2 KB RAM, 1.8 V to 3.6 V, 32-LQFP, industrial-grade, and distributor-availability facts while explicitly separating unavailable engineering data. It also provides purchasing context and decision guidance for engineers evaluating this S08 MCU without inventing substitute pinouts or unverified lifecycle claims.

RFQ Contact
MC9S08RG32CFJE - 8-Bit 8MHz 32KB Flash MCU | NXP
MC9S08RG32CFJE

MC9S08RG32CFJE - 8-Bit 8MHz 32KB Flash MCU | NXP

The NXP Semiconductors MC9S08RG32CFJE is an 8-bit S08 microcontroller with an 8 MHz core, 32 KB of Flash memory, and a 32-pin LQFP package measuring 7 x 7 mm. The verified distributor description identifies this device as an S08 microcontroller with 32 KB (32K x 8) Flash and an 8 MHz operating speed. It is listed by NXP as no longer manufactured, so engineers should treat it as an obsolete or legacy procurement item rather than assume a current production roadmap. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, peripherals, and I/O in one package. In the broader hierarchy, an MCU is a semiconductor and embedded-control component used to read sensors, control actuators, communicate with other circuits, and execute firmware. The S08 family is positioned for compact embedded systems where an 8-bit architecture, Flash programmability, and conventional microcontroller peripherals provide an economical control solution. The verified data specifically confirms the core speed, architecture, Flash capacity, and package. The NXP product-page search result also describes the family as an S08 8-bit MCU with 32 KB Flash and a QFP 32 package. The available data does not provide complete details for RAM, supply voltage range, peripheral inventory, operating-temperature range, watchdog behavior, communication blocks, or exact pin-level electrical limits. Those values must be confirmed from the original NXP datasheet before a new design relies on them. MC9S08RG32CFJE is suitable for legacy industrial, appliance, control, and instrumentation designs that specifically use the S08RG family and its established firmware toolchain. It may fit a board using a 32-pin LQFP footprint only after pin compatibility, power requirements, memory map, peripheral functions, and software support have been compared against the replacement device. Because the part is no longer manufactured, procurement planning should include risk assessment for counterfeit screening, last-time-buy status, firmware image availability, and long-term maintenance. The principal design consideration is not simply whether another 8-bit MCU has a similar Flash size. A true replacement must match the package, pin assignments, power architecture, interrupt and timer resources, memory organization, bootloader expectations, and software tool support. Use the manufacturer datasheet and a validated cross-reference tool for any substitution decision; the generic search results alone do not establish drop-in compatibility. This page combines verified distributor and manufacturer-page information, lifecycle status, package details, and procurement-oriented engineering guidance. It intentionally distinguishes confirmed data from missing datasheet parameters so that engineers can make a controlled legacy-component decision rather than relying on an incomplete substitute claim.

RFQ Contact
MC9S08RG32FGE - 8-bit HCS08 MCU 32KB Flash 44-LQFP | NXP
MC9S08RG32FGE

MC9S08RG32FGE - 8-bit HCS08 MCU 32KB Flash 44-LQFP | NXP

The NXP MC9S08RG32FGE is an 8-bit HCS08-family microcontroller featuring 32KB of Flash program memory, 2KB of RAM, and a maximum bus frequency of 8 MHz (with internal HCS08 core running up to a higher internal rate per the S08RG family datasheet), housed in a 44-pin LQFP package (10 mm × 10 mm, 0.8 mm pitch). The FGE suffix indicates the LQFP-44 tray packaging variant. Originally designed and manufactured by Freescale Semiconductor, this part is now supported through NXP's product lifecycle for legacy designs. A microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and GPIO. The HCS08 is NXP/Freescale's 8-bit CISC core, descended from the long-running HC05/HC08 architecture, designed for ultra-low power and deterministic interrupt response. MCUs sit at the bottom of the embedded hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Key features of the MC9S08RG32FGE include an integrated 8-channel 10-bit ADC, multiple timers (TPM), an SCI (UART) serial interface, an SPI peripheral, and up to 39 GPIO pins depending on package configuration. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer and supports BCD arithmetic instructions for low-overhead decimal math. An on-chip clock generator with internal oscillator trimming reduces external component count. The device is fabricated in 0.25 µm CMOS technology optimized for low-power operation, supporting multiple STOP and WAIT modes. Power-on reset, low-voltage detect, and watchdog timer peripherals are integrated. The internal bus structure supports single-cycle access to most registers, making the 8 MHz bus speed deliver competitive throughput for its class. Typical applications include white goods and appliance control, motor and fan control front-ends, building automation (thermostats, sensors), industrial sensors, low-end security panels, and battery-powered metering. The combination of small Flash footprint (32KB) and low pin count suits cost-sensitive embedded designs. When designing with this device, verify the latest reference manual revision and use NXP's CodeWarrior or newer MCUXpresso/Eclipse-based tools with the S08 toolchain. Place decoupling capacitors (100 nF and 4.7 µF) close to the VDD pins. This page synthesizes distributor inventory, drop-in compatible alternatives, application notes, and design tips that go beyond what is captured in the manufacturer datasheet alone, supporting sourcing decisions for legacy and active designs.

RFQ Contact
MC9S08RG32FJE - 8-Bit 8MHz 32KB MCU 32-LQFP | NXP
MC9S08RG32FJE

MC9S08RG32FJE - 8-Bit 8MHz 32KB MCU 32-LQFP | NXP

NXP Semiconductors MC9S08RG32FJE is an 8-bit S08 embedded microcontroller with an 8 MHz maximum clock, 32 KB of programmable flash, and a 32-pin LQFP package measuring 7 mm by 7 mm. The verified distributor listing identifies 2 KB of RAM, a 7 x 7 mm LQFP package, and embedded microcontroller functionality. A microcontroller is a programmable integrated circuit that executes firmware, reads inputs, controls outputs, and interfaces with sensors, communications circuits, and actuators. The S08 family belongs to the embedded MCU hierarchy and combines a CPU core, nonvolatile program memory, data memory, timers, serial interfaces, and GPIO resources in one compact device. The MC9S08RG32FJE combines 32 KB of flash with 2 KB of RAM and operates at up to 8 MHz. This combination is appropriate for compact embedded products that require nonvolatile firmware storage, deterministic peripheral control, and modest processing throughput. Its 32-LQFP package provides a higher pin count than a small-outline package while retaining a board footprint of 7 mm by 7 mm. The S08 architecture is intended for cost-sensitive embedded control rather than high-performance computing. Applications must account for the limited RAM and flash budgets when selecting the application architecture, bootloader strategy, communication stack, and logging strategy. The verified data does not specify the exact peripheral set, supply voltage, operating-temperature range, or individual pin assignments. Typical uses include compact motor controllers, appliance controls, small sensor nodes, simple keypad interfaces, and low-cost embedded instrumentation. A design can place the MCU beside a power regulator, input conditioning, display or communication interface, and output drivers, with the firmware coordinating those functions. Before layout, use the manufacturer datasheet and package drawing to verify every pin, supply requirement, decoupling recommendation, and programming connection. Do not infer missing electrical details from a distributor category label, and confirm software-tool and bootloader compatibility before committing the part to a new design. This page consolidates verified distributor specifications, sourcing information, and design caveats for engineers evaluating the MC9S08RG32FJE, while clearly separating confirmed values from parameters that require manufacturer documentation.

RFQ Contact
MC9S08RG60CFGE - 8-Bit 8MHz 60KB MCU | NXP | Embedded Control
MC9S08RG60CFGE

MC9S08RG60CFGE - 8-Bit 8MHz 60KB MCU | NXP | Embedded Control

The NXP Semiconductors MC9S08RG60CFGE is an 8-bit S08 microcontroller with an 8 MHz operating frequency, 60 KB of Flash memory, and 2 KB of RAM, supplied in a 44-LQFP package. It is designed for embedded control applications requiring deterministic 8-bit processing, integrated flash, and a compact surface-mount footprint. The verified distributor listing identifies the device as an S08 microcontroller with a 44-LQFP 10 x 10 mm package. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and input/output functions into one package. In the hierarchy of electronic components, this MCU belongs to the embedded-controller family and provides higher integration than discrete logic. The S08 architecture is intended for compact control systems in which software, flash-resident firmware, timers, communication interfaces, and mixed-signal control functions are required in one device. The key verified specifications are the 8-bit architecture, 8 MHz operating frequency, 60 KB Flash memory, and 2 KB RAM. The 60 KB Flash capacity supports substantially larger firmware than the 2 KB RAM working area, while the 44-LQFP package provides 44 external leads for PCB-level connectivity. The NXP data-sheet family also identifies a 2-channel, 16-bit timer/PWM module with selectable input capture, output compare, and edge-aligned or center-aligned PWM capability. This device is suitable for industrial control, appliance control, instrumentation, motor and power-system control, and compact embedded products. The S08 platform can execute control firmware from Flash while using RAM for working variables, stack operations, and intermediate data. Designers should verify the complete pinout, electrical limits, clock configuration, peripheral availability, memory map, and package details against the manufacturer data sheet before finalizing a PCB or production design. A key design consideration is that an 8 MHz MCU is appropriate for control-loop and supervisory tasks where deterministic peripheral timing and low-cost embedded integration matter more than high-throughput computation. Because the verified data does not provide a complete electrical timing table, supply limits, temperature range, or detailed peripheral inventory, those values must be confirmed from the official NXP data sheet rather than inferred from distributor summaries. The 44-LQFP footprint also requires careful land-pattern, solder, and thermal-management review. This page combines the verified distributor specifications, the official NXP data-sheet link, application-oriented engineering context, and a transparent record of unavailable technical details. It is intended to help engineers identify the correct MCU category, compare it with other S08 devices, locate the manufacturer documentation, and plan an evidence-based sourcing and design review rather than treating incomplete distributor snippets as a complete electrical specification set.

RFQ Contact
MC9S08RG60CFJ - 8-Bit 8MHz 60KB Flash MCU | NXP
MC9S08RG60CFJ

MC9S08RG60CFJ - 8-Bit 8MHz 60KB Flash MCU | NXP

NXP Semiconductors MC9S08RG60CFJ is an 8-bit S08 microcontroller operating at up to 8 MHz, with 60 KB of Flash memory and 2 KB of RAM in a 32-LQFP 7 x 7 mm package. The MCU combines an 8-bit processor core with SCI and SPI connectivity, low-voltage detection, power-on reset, and an operating-temperature range of -40°C to +85°C. Its 60K x 8 Flash organization makes it suitable for compact embedded-control systems requiring nonvolatile firmware storage and moderate serial communications. An 8-bit microcontroller is a compact computing platform that integrates a processor core, memory, and peripherals into one semiconductor device. Within the embedded-control hierarchy, the MC9S08RG60CFJ belongs to the S08 family of 8-bit microcontrollers, combining Flash program memory with serial communications and reset functions. This device type is used when a controller must execute control logic, monitor external conditions, and communicate with sensors or other embedded modules without requiring a high-performance processor. The principal device features include an 8 MHz maximum operating frequency, 60 KB of Flash program memory, 2 KB of SRAM, SCI and SPI serial interfaces, and a compact 32-LQFP package. The 7 x 7 mm package provides a practical board-area reduction for embedded products while exposing 32 pins for power, ground, reset, programming, clock, input, output, and serial-interface functions. Its -40°C to +85°C temperature range supports industrial-temperature product designs. The S08 architecture is designed for cost-sensitive embedded control rather than high-throughput computation. Flash memory retains firmware without a separate external program-memory device, while the on-chip SRAM supports working variables and runtime data. The SCI interface can support serial communication with sensors, transceivers, or service equipment, while SPI provides a synchronous interface for compatible peripheral devices. Low-voltage detection and power-on reset support dependable startup behavior in systems whose supply voltage can vary or fluctuate. Typical uses include appliance controllers, industrial interface modules, motor and valve-control products, measurement instruments, communication modules, and compact embedded systems with human-machine interfaces. A designer can use the SCI connection for a point-to-point control link or SPI for a short-distance peripheral bus, provided the attached devices use compatible electrical and protocol settings. PCB design should preserve short, stable paths for the MCU supply and ground pins and provide the decoupling and clock components required by the manufacturer application information. Before finalizing a board, use the manufacturer pin-description and connection tables to assign every LQFP pad, including programming, reset, and unused pins. Validate the intended temperature grade and full operating voltage range during design verification. This page consolidates the core memory, speed, package, interface, and environmental characteristics of the MC9S08RG60CFJ with practical application guidance, verified listing information, and a clear assessment of drop-in replacement availability. It is intended to help engineers identify whether this legacy S08 controller meets their firmware, interface, footprint, and environmental requirements before committing to a design.

RFQ Contact
MC9S08RG60CFJE - 8-Bit S08 MCU 60KB Flash 32-LQFP | NXP
MC9S08RG60CFJE

MC9S08RG60CFJE - 8-Bit S08 MCU 60KB Flash 32-LQFP | NXP

The NXP (formerly Freescale) MC9S08RG60CFJE is an 8-bit HCS08 CISC microcontroller featuring 60KB of on-chip FLASH program memory, 2KB of RAM, and an 8MHz internal bus clock, housed in a 32-pin LQFP (7x7 mm) industrial-temperature package. It belongs to the S08RG family of low-cost, low-power microcontrollers targeting cost-sensitive embedded designs that require more code space than the entry-level S08 families deliver. Background: An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. The HCS08 (or S08) family is NXP's second-generation 8-bit core succeeding the HC08, offering improved instruction efficiency, lower power, and a richer peripheral set while preserving the CISC instruction set for legacy code compatibility. MCUs sit within the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC, and the S08 family occupies the low-power, cost-optimized tier of NXP's 8-bit portfolio. Key features include on-chip FLASH with in-application reprogrammability, an integrated ADC, timers, multiple communication peripherals, and an operating voltage range of 1.8V to 3.6V. The 32-LQFP package provides easy hand-soldering and breadboard-friendly prototyping, and the industrial temperature grade (-40C to +85C) supports commercial and industrial embedded deployments. The MC9S08RG60 uses NXP's standard S08 core with a background debug mode (BDM) interface for non-intrusive in-circuit debugging, a feature carried over from the legacy HC08 architecture. The 60KB FLASH size positions this MCU for applications that have outgrown 32KB-class S08 parts but do not yet require the cost of 16-bit or 32-bit devices. Typical applications include consumer appliances, HVAC controls, simple motor control loops, battery chargers, low-end human-machine interface (HMI) panels, and remote sensor nodes. The combination of FLASH memory, low voltage operation, and industrial temperature grade makes this MCU well suited to mains-powered industrial controllers and portable battery-driven products. When designing with the MC9S08RG60CFJE, reserve the BDM pins (BKGD and RESET) for the debug header to enable in-circuit programming and debugging. Decouple VDD/VSS pairs with 100nF ceramic capacitors placed within 5 mm of the package pins, and follow NXP's PCB layout recommendations for oscillator and ADC analog rail routing. This page synthesizes distributor pricing, datasheet specifications, and engineering context for the MC9S08RG60CFJE that go beyond the manufacturer product page, helping engineers select, source, and design with this MCU.

RFQ Contact
MC9S08RG60FG - 8-Bit 8MHz 60KB Flash MCU, 44-LQFP | Motorola
MC9S08RG60FG

MC9S08RG60FG - 8-Bit 8MHz 60KB Flash MCU, 44-LQFP | Motorola

The Motorola MC9S08RG60FG is an 8-bit S08-series microcontroller with 60 KB of embedded flash memory, an 8 MHz bus clock and a 1.8 V to 3.6 V operating supply range, packaged in a 44-pin LQFP (10 x 10 mm) surface-mount package. A microcontroller is a complete single-chip computer: a CPU core, program memory, data memory, clocking, and on-chip peripherals integrated onto one die. The S08 family from Motorola is an 8-bit architecture aimed at cost-sensitive embedded control tasks such as consumer appliances, small motor drives, keypads, lighting controllers and simple sensor nodes. In the system hierarchy a microcontroller sits above a microprocessor only in integration, not in compute power: it trades raw speed for low power, low cost, and deterministic real-time behaviour. The MC9S08RG60FG is built around the S08 8-bit core operating at up to 8 MHz, with 60K x 8 bytes of on-chip flash for in-circuit programmability. Its wide 1.8 V to 3.6 V supply span allows the same part to run directly from a single Li-ion cell, a 3 V coin cell, or a regulated 3.3 V rail, and the 44-LQFP package with a 10 x 10 mm body keeps the footprint compact enough for small consumer appliances and portable instruments. Because flash is on-chip, application firmware can be re-programmed in the field through the device's serial programming interface, which removes the need for an external EEPROM or bootloader in many designs. This also protects intellectual property more effectively than mask-programmed ROM, while keeping the bill of materials to a single active device plus a decoupling network. Typical uses include household appliance controllers, small brushless and stepper motor sub-systems, lighting and dimming modules, battery-powered measurement instruments, remote keypads, and general-purpose industrial control nodes where an 8-bit core with 60 KB of flash is ample for firmware of several thousand lines. When laying out the board, keep the decoupling capacitors as close as practical to the supply pins and route the clock and reset nets away from switching nodes. Because the 8 MHz bus speed is modest, flash wait states are not a concern, but brownout behaviour during slow supply ramps still needs verifying against your power source. This page combines the verified distributor and manufacturer listings for the MC9S08RG60FG with a parameter-by-parameter comparison table, same-family drop-in alternatives, and practical layout guidance that goes beyond the basic datasheet feature list.

RFQ Contact
MC9S08RG60FGE - 8-Bit 60KB Flash MCU | NXP | 44-LQFP
MC9S08RG60FGE

MC9S08RG60FGE - 8-Bit 60KB Flash MCU | NXP | 44-LQFP

NXP Semiconductors MC9S08RG60FGE is an 8-bit S08 CISC microcontroller with 60 KB flash memory, 2.5 V or 3.3 V operation, and a 44-pin LQFP package. It is designed for embedded control, general-purpose industrial, and low-cost systems requiring integrated flash, timers, communication peripherals, and system protection. The supplied sources identify the device as an 8-bit MCU with 60 KB flash and a 44-LQFP package. A microcontroller is a compact embedded-processing device that integrates a processor core, nonvolatile program memory, data memory, timers, input/output ports, and communication interfaces on one semiconductor package. The S08 family uses an 8-bit CISC architecture suited to straightforward control loops, keypad handling, actuator control, sensor acquisition, and communication-hub functions. MC9S08RG60FGE belongs to the broader MCU -> embedded processor -> semiconductor hierarchy. The MC9S08RG60 family provides a 2-channel, 16-bit timer/pulse-width modulator module. According to the NXP datasheet, TPM1 can operate as a free-running counter, a modulo counter, or an up/down counter, with selectable input capture, output compare, and edge-aligned or center-aligned PWM capability on each channel. These peripherals support precise timing, motor-control, power-control, and signal-generation tasks without requiring a separate timer IC. The 44-LQFP package provides a surface-mount footprint and is suitable for automated PCB assembly. Because the verified data does not specify exact pin assignments, RAM size, clock frequency, operating-temperature range, ADC specifications, communication ports, or electrical limits, those values should be confirmed from the official MC9S08RG60 datasheet before schematic capture or firmware deployment. The heater suffix and tray packaging in the supplied listing should also be checked against the manufacturer’s ordering information. Typical application domains include industrial equipment, building controls, appliance controllers, metering systems, and embedded motor or power-control systems. Designers should use the datasheet’s pin, clock, reset, power-supply, decoupling, and programming guidance to ensure the device is initialized correctly. A hardware redesign should not assume that an alternative is interchangeable unless its package, pinout, memory map, peripherals, voltage limits, and software support have all been verified. This page combines the verified 8-bit MCU, 60 KB flash, 2.5 V/3.3 V, and 44-LQFP facts with the documented TPM1 capabilities and practical sourcing guidance. It is intended to support initial component selection while clearly separating verified information from parameters that require manufacturer-datasheet confirmation.

RFQ Contact
MC9S08RG60FJ - 8-Bit S08 MCU, 8MHz, 60KB Flash, 32-LQFP | NXP
MC9S08RG60FJ

MC9S08RG60FJ - 8-Bit S08 MCU, 8MHz, 60KB Flash, 32-LQFP | NXP

The NXP Semiconductors MC9S08RG60FJ is an 8-bit S08 microcontroller operating at up to 8 MHz with 60 KB (60K x 8) of embedded flash memory, offered in a 32-LQFP (7x7 mm) surface-mount package. It belongs to the S08 microcontroller family, a 1.8 V-to-5.5 V capable 8-bit architecture built around a compact reduced-instruction-set core designed for cost-sensitive embedded control. An MCU (microcontroller unit) is a single integrated circuit that combines a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog converters on one die. In the device hierarchy, an MCU sits below microprocessor and SoC designs, and the S08 family sits inside the broader 8-bit embedded-control segment alongside parts such as the 8051 and AVR families. Its main advantage is integration: the on-chip flash removes an external memory interface, shrinking both board area and total system cost. Key features of the MC9S08RG60FJ include a 60 KB flash program memory, an 8 MHz maximum bus frequency, and a 32-LQFP (7x7) industrial-style package that keeps the footprint compact for embedded control boards. The family datasheet covers the MC9S08RC, RD, RE, and RG devices, so the RG60 part shares a documented register map and toolchain with the rest of the S08 RC/RD/RE/RG group. Technically, the part belongs to the S08 product line, whose 8-bit core balances code density with deterministic interrupt-driven control. The RG60 device is the larger-flash member of the 32-pin RG group, which is useful when an application needs on-board program storage for bootloader code, configuration tables, or multiple protocol stacks without adding external SPI flash. Typical applications include industrial control and factory automation modules, consumer appliance controllers, low-cost sensor nodes, and general-purpose embedded control boards where a compact 8-bit core with integrated flash is preferred over an external microcontroller plus memory solution. The primary design consideration is decoupling and layout: place the bulk bypass capacitor at the supply pins and route the 60 KB of flash code from a stable internal oscillator to avoid timing margin problems. Because the S08 family is a mature platform, development tooling and reference code are widely available. This page consolidates family datasheet detail, drop-in alternatives in the identical 32-LQFP footprint, and practical design guidance that is not consolidated in a single manufacturer document.

RFQ Contact
MC9S08RG60FJE - 8-Bit 8MHz 60KB Flash MCU | NXP
MC9S08RG60FJE

MC9S08RG60FJE - 8-Bit 8MHz 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08RG60FJE is an 8-bit S08 microcontroller with an 8 MHz maximum core frequency, 60 KB of flash program memory, and a 32-LQFP package measuring 7 mm by 7 mm. It belongs to the MC9S08RG60 family and is intended for embedded control designs that require deterministic 8-bit processing, integrated nonvolatile program storage, and a compact surface-mount footprint. The verified distributor listing identifies the processor as an S08 and states 8-bit operation, 8 MHz speed, 60 KB flash, and 32-LQFP packaging. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-computing component. The S08 architecture is a compact 8-bit core used to execute control firmware, sample inputs, operate timers, and manage communication or actuator functions. Within the broader semiconductor hierarchy, this device is a microcontroller and therefore an embedded-processing IC rather than a general-purpose processor, analog regulator, or power component. The headline configuration combines a maximum stated frequency of 8 MHz with 60 KB of flash, giving firmware designers a defined execution-speed and program-memory budget. Flash retains programmed code when power is removed, supporting field updates and persistent embedded behavior. However, the supplied evidence does not include RAM size, operating-voltage range, peripheral inventory, flash endurance, temperature limits, or I/O ratings, so those specifications must be confirmed from the official NXP or Freescale device documentation before design release. The 32-LQFP package provides a substantially larger pin count than a basic 8-pin controller, potentially supporting multiple digital I/O and hardware functions. Exact pin names, alternate functions, exposed-pad details, and electrical limits are not present in the provided evidence, so assigning a complete pinout from memory would be unsafe. The package drawing and pin table must be taken directly from the applicable official datasheet or reference manual. Typical uses include industrial control modules, appliance controllers, sensor-interface nodes, compact automation products, and low-cost embedded products whose firmware fits within the available program memory. The 8 MHz S08 core is particularly relevant to simple sequencing, status monitoring, key and button handling, light-duty motor control, and peripheral coordination where higher processing bandwidth is unnecessary. Design selection should begin with a memory-budget review and complete peripheral-level validation. Confirm the required RAM, I/O count, analog functions, communication peripherals, clock options, reset behavior, and voltage constraints in the official documentation. Preserve the specified 32-LQFP footprint when making a second-source or board-reuse decision; another package cannot be treated as a drop-in replacement merely because it performs a similar function. This page consolidates the verified product identity, package, processor class, and sourcing references while explicitly separating confirmed facts from data still needed for engineering approval. Its value lies in honest gap disclosure: no unverified pinout, timing, memory, compliance, price, or drop-in substitution is presented as established fact.

RFQ Contact
MC9S08RX32AFE - 8-Bit 32KB Flash MCU | NXP
MC9S08RX32AFE

MC9S08RX32AFE - 8-Bit 32KB Flash MCU | NXP

The NXP Semiconductors MC9S08RX32AFE is an 8-bit S08RX-series microcontroller with 32 KB of flash program memory, 2 KB of RAM, and a 64-QFN-EP surface-mount package measuring 9 x 9 mm. The device is associated with an 8 MHz operating frequency in the exact-part distributor listing, while the S08RX family is also described as supporting up to 16 MHz. Its combination of embedded flash, RAM, an exposed thermal pad, and a compact 64-pin footprint supports compact embedded control systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The MC9S08RX32AFE belongs to the hierarchy of microcontroller, embedded controller, S08RX microcontroller, 8-bit MCU, and embedded semiconductor. Its S08 architecture provides a familiar platform for motor control, appliance control, instrumentation, and other applications that require deterministic peripheral handling in a compact package. The principal device characteristics include 32 KB of flash memory, 2 KB of RAM, and 8-bit processing. The flash memory provides nonvolatile program storage, while RAM supports working data and stack operations. The exact part is housed in a 64-QFN-EP package with a 9 x 9 mm footprint, allowing a relatively compact board layout despite the high pin count. The exposed pad provides a thermal and electrical connection to the PCB when the package is assembled according to the manufacturer land pattern. The S08RX family was designed as an upgrade path for 68HC05 and 68HC08 designs that require lower power, additional peripherals, and enhanced performance. This migration path can simplify redevelopment because established 68HC08 application concepts, peripheral arrangements, and software practices can be carried into the S08RX architecture. Engineers should nevertheless validate clock configuration, interrupt behavior, memory mapping, and peripheral differences when transferring an existing design. Typical uses include small motor controllers, appliance interfaces, industrial control modules, sensor-conditioning equipment, and compact consumer devices. The 64-QFN-EP package is especially useful where board area is constrained but a high pin count supports multiple I/O functions. Compared with larger-lead-count through-hole packages, it also supports denser assembled boards and shorter PCB routing when decoupling, programming, debug, and exposed-pad connections are laid out correctly. The most important design consideration is package validation. Place programming and debug signals so they remain accessible, connect the exposed pad according to the manufacturer land pattern, and route sensitive inputs away from switching nodes. Decoupling capacitors should be positioned close to the appropriate power pins, while the exposed pad should have adequate thermal copper without compromising assembly clearance. This product guide combines the exact-part package information, memory characteristics, sourcing questions, family-level application context, and design guidance. It also distinguishes a genuine drop-in replacement from a related microcontroller whose package or architecture differs, helping engineers make a safer sourcing or redesign decision without assuming that similar specifications guarantee PCB compatibility.

RFQ Contact
MC9S08SE4CRL - S08 8-bit MCU, 4KB Flash, 20MHz, 28-PDIP | NXP
MC9S08SE4CRL

MC9S08SE4CRL - S08 8-bit MCU, 4KB Flash, 20MHz, 28-PDIP | NXP

The NXP (Freescale Semiconductor) MC9S08SE4CRL is a cost-effective 8-bit microcontroller unit based on the high-performance HCS08 (S08) core, running at 20 MHz CPU frequency (10 MHz internal bus), with 4 KB (4K x 8) of FLASH program memory, housed in a 28-pin PDIP package (0.600 inch / 15.24 mm width). An 8-bit microcontroller is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, positioned within the broader hierarchy of embedded processors: MCU -> microcontroller -> embedded processor -> semiconductor device. The S08 family succeeds the HC08 family, providing excellent compatibility with Freescale's 5V MCU portfolio, including pin, peripheral, and tool compatibility, which simplifies migration between family members. Key features of the MC9S08SE4CRL include the 20 MHz HCS08 central processing unit (CPU) with HC08 assembly source compatibility, 4 KB of in-circuit reprogrammable FLASH memory, operation from both 3.3V and 5V supplies (per distributor parametric data), and a low-cost entry point for high-volume designs. The S08SE series integrates typical S08 peripherals such as timers, serial communication interfaces, and ADC channels - consult the manufacturer datasheet for the exact peripheral configuration of this memory-density variant. Architecture-wise, the HCS08 core uses a CISC instruction set with upward-compatible HC08 object code, a background debug module (BDM) for non-intrusive on-chip debugging, and internal bus operation at half the CPU clock rate, delivering deterministic 8-bit real-time performance suitable for cost-sensitive control tasks. Typical applications include small home appliances, low-cost consumer electronics, battery chargers, simple motor control, industrial sensors, and legacy 5V system replacements where HC08 compatibility and PDIP through-hole mounting are required for prototyping and low-volume production. For design, note that the PDIP package eases hand assembly and rework on 2.54 mm pitch prototyping boards; verify supply-voltage-dependent parameter limits in the datasheet when running at 3.3V versus 5V. This page consolidates distributor pricing, lifecycle/sourcing information, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MC9S08SE4CTG - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP
MC9S08SE4CTG

MC9S08SE4CTG - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP

NXP Semiconductors MC9S08SE4CTG is an 8-bit HCS08 microcontroller with a 20 MHz CPU, 4 KB of Flash program memory, and a 16-pin TSSOP package. The device belongs to the S08SE family, a cost-focused 5 V MCU series built around the 8-bit S08 core and a 10 MHz internal bus. NXP identifies the MC9S08SE4CTG as end of life, so procurement should include a lifecycle review before committing to new production designs. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and I/O in one package. The S08 architecture belongs to the 8-bit MCU hierarchy and provides a straightforward platform for embedded control. Within that hierarchy, MC9S08SE4CTG targets compact control tasks requiring modest Flash capacity, a 5 V supply environment, and a compact surface-mount footprint. The principal specifications are an 8-bit HCS08 central processing unit, a 20 MHz maximum operating frequency, 4 KB of Flash memory, and a 10 MHz internal bus frequency. The family description emphasizes compatibility with Freescale's 5 V MCU portfolio, including peripheral and tooling compatibility. Its small Flash capacity suits bootloaders, simple sequencers, compact controllers, and accessory modules rather than graphics-heavy or connectivity-intensive applications. The S08 core provides a straightforward instruction set and integrated control peripherals, while the 10 MHz internal bus accommodates the 20 MHz CPU architecture without requiring a fast external-memory interface. Because the MCU is intended for cost-sensitive embedded designs, software architecture should treat the 4 KB Flash limit as a primary design constraint. External serial EEPROM can extend data storage when parameter logging or nonvolatile configuration is required. Typical uses include low-cost industrial controllers, appliance interfaces, small sensor nodes, battery-operated accessories, programmable timers, and simple motor-control front ends. The 16-pin TSSOP is particularly useful where board area is constrained and a through-hole or larger surface-mount package would be unnecessary. Firmware should be validated at the 20 MHz maximum clock, with oscillator tolerance, supply voltage, and peripheral timing included in the worst-case analysis. The main design trade-off is the limited 4 KB Flash capacity. Engineers should minimize library size, reserve space for boot code or updates where required, and use external EEPROM for larger nonvolatile data. The TSSOP package also has closely spaced leads, so inspect the manufacturer land pattern carefully and maintain adequate soldermask clearance. No external memory-bus or advanced analog specification should be assumed without checking the full device documentation. This product page combines lifecycle status, core specifications, family-level compatibility information, application guidance, and drop-in migration considerations. It helps engineers distinguish a direct same-package replacement from a redesign and plan sourcing for an end-of-life 8-bit MCU while keeping code, hardware, and schedule risk visible.

RFQ Contact
MC9S08SE4CWL - 8-Bit 20MHz 4KB MCU | NXP | SOIC-28
MC9S08SE4CWL

MC9S08SE4CWL - 8-Bit 20MHz 4KB MCU | NXP | SOIC-28

The NXP MC9S08SE4CWL is an 8-bit S08 microcontroller operating at up to 20 MHz, with 4 KB of flash memory and a 28-pin SOIC package. The verified distributor listing identifies it as a cost-effective 5 V MCU, while the available comparison data describes the S08SE family as an enhanced S08-core platform with a 10 MHz internal bus frequency. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, and peripherals in one device. The S08 family is positioned as a cost-effective 8-bit MCU platform, and the MC9S08SE4CWL is intended for embedded control tasks where modest processing capacity, compact packaging, and established Freescale/NXP S08 compatibility are useful. Its 20 MHz CPU enables basic control loops, digital I/O handling, timing functions, and communication-interface integration. The key verified characteristics are the 8-bit CPU architecture, 20 MHz operating frequency, 4 KB flash, 4K x 8 organization, 28-pin SOIC package, and 5 V MCU classification. The related S08SE documentation describes compatibility with Freescale 5 V MCU portfolios and identifies the enhanced S08 core and 10 MHz internal bus. Detailed RAM, peripherals, electrical limits, and timing parameters were not included in the supplied verified data and are therefore marked as data needed rather than estimated. Typical engineering uses include small industrial controllers, sensor-interface boards, keypad and display products, simple motor or relay-control systems, and compact consumer products that retain the S08 software ecosystem. Because the target is marked End of Life on the NXP product page, new designs should confirm availability, migration requirements, and any recommended replacement before committing to production. For a new PCB, engineers should verify the exact pinout, oscillator requirements, supply limits, programming method, and peripheral assignments against the official NXP data sheet before layout. For an existing design, the 28-pin SOIC footprint is not sufficient proof of drop-in equivalence; pin functions, memory size, voltage requirements, clock behavior, and software compatibility must all be checked. This page consolidates the verified distributor classification, package, memory, speed, lifecycle indication, and sourcing references with practical selection guidance. It does not infer unavailable electrical limits or claim unverified replacements.

RFQ Contact
MC9S08SE4MTG - 8-bit 20MHz 4KB Flash MCU | NXP | 16-TSSOP
MC9S08SE4MTG

MC9S08SE4MTG - 8-bit 20MHz 4KB Flash MCU | NXP | 16-TSSOP

The NXP Semiconductors MC9S08SE4MTG is an 8-bit HCS08 microcontroller from the MC9S08SE family, featuring a 20 MHz CPU core with 10 MHz internal bus frequency and 4 KB of on-chip Flash memory. Housed in a 16-pin TSSOP (Thin Shrink Small Outline Package) with surface-mount gull-wing leads, the device belongs to Freescale/NXP's 5V MCU portfolio and is targeted at low-cost 8-bit applications requiring a wider operating voltage headroom than typical 3.3V MCUs. What is an 8-bit microcontroller? An 8-bit MCU is a small computer-on-a-chip built around an 8-bit data path, integrating a CPU, RAM, non-volatile program memory (Flash/ROM), timers, communication peripherals (UART, SPI, I2C), analog-to-digital converters, and general-purpose I/O. MCUs occupy the bottom of the embedded computing hierarchy (microcontroller -> embedded processor -> computing platform), making them the dominant choice for appliance control, sensor readout, automotive body electronics, and consumer device firmware where cost and deterministic real-time response matter more than raw computational throughput. Key features of the MC9S08SE4MTG include a 20 MHz HCS08 central processing unit, 4 KB Flash program memory, multiple low-power modes, an on-chip oscillator, and background debug mode support. The 5V supply range allows direct interfacing with legacy 5V peripherals, automotive 12V battery-derived rails, and industrial 24V systems after regulation, eliminating level shifters in many designs. From an architectural standpoint, the HCS08 core is a modernized, fully-static CMOS upgrade of the classic HC08 instruction set, featuring a BDC (Background Debug Controller) for in-circuit programming and a multiplexed address/data bus for peripheral access. Compared to the older HC08, the HCS08 adds a wider instruction set with improved indexing modes, lower power consumption, and integrated voltage regulation for the core logic. Typical applications include automotive body controllers (lighting, seat, mirror modules), white-goods and appliance control boards, industrial sensor interfacing, low-cost consumer devices, and remote controls that benefit from 5V tolerance and small TSSOP packaging. When designing with this MCU, ensure proper decoupling on VDD/VSS and follow the recommended PCB layout for the TSSOP-16 thermal and EMI behavior. Note that part production status should be checked before committing to a long-lifecycle design. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MC9S08SE4MWL - 8-Bit 20MHz S08 MCU, 4KB Flash | NXP
MC9S08SE4MWL

MC9S08SE4MWL - 8-Bit 20MHz S08 MCU, 4KB Flash | NXP

The NXP MC9S08SE4MWL is an 8-bit S08 family microcontroller built on the HCS08 CPU core, delivering 20 MHz CPU clock (10 MHz internal bus) with 4 KB of embedded Flash in a 28-pin SOIC package. The device is part of the cost-effective, high-performance S08 family and provides pin, peripheral, and tool compatibility with the legacy Freescale 5V MCU portfolio, enabling drop-in upgrades for existing 5V designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripheral set (timers, ADC, communication interfaces), and I/O into one package. The S08 family belongs to the 8-bit microcontroller hypernym hierarchy: 8-bit MCU -> embedded processor -> microcontroller -> integrated circuit -> semiconductor. It is the cost- and power-optimized tier below 32-bit Cortex-M microcontrollers, and is widely used where deterministic bit-manipulation, ultra-low sleep current, and minimal BOM cost matter more than raw compute throughput. Key features of the MC9S08SE4MWL include the HCS08 central processor with 20 MHz operation, 4 KB of Flash, on-chip voltage regulator supporting 3.3V/5V operation, multiple timer modules, and standard serial communication peripherals. The wide 2.7V to 5.5V supply range makes it suitable for both battery-powered and industrial 5V bus systems without external level shifters. Architecturally, the S08SE family uses a von-Neumann bus architecture with a 16-bit address space and an enhanced HCS08 instruction set that is fully compatible with the legacy HC08 ISA. Internal peripherals are clocked from the bus, and the integrated voltage regulator and brownout detector simplify power-supply design. Designers can migrate between S08SE family members (SE4/SE8) with the same toolchain and peripheral set, scaling Flash and RAM without changing the PCB layout. Typical applications include low-cost 5V industrial control, home appliances, motor control (small BLDC and stepper), sensor nodes, battery chargers, and automotive body electronics. The 28-SOIC package is hand-soldering friendly, making it popular for prototypes and low-volume production. When designing with the MC9S08SE4MWL, ensure that the BDM (Background Debug Mode) pins are accessible for in-circuit programming, and add a bulk decoupling capacitor near the VDD pin. Avoid routing high-speed signals across the analog AVSS/AVDD pair to minimize ADC noise coupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet with selection guidance not found on stock-shop pages.

RFQ Contact
MC9S08SE4VTG 20MHz 8-Bit 4KB Flash MCU | NXP
MC9S08SE4VTG

MC9S08SE4VTG 20MHz 8-Bit 4KB Flash MCU | NXP

The NXP Semiconductors MC9S08SE4VTG is an 8-bit HCS08 microcontroller with a 20 MHz S08 core, 4 KB of Flash program memory, 256 x 8 RAM, and 14 general-purpose I/O pins in a 16-pin TSSOP package. It is designed for compact 5 V embedded-control designs and includes LINbus and SCI connectivity, PWM, low-voltage detection, and power-on reset features. An 8-bit microcontroller is a programmable integrated circuit that executes firmware from embedded Flash memory and uses peripherals to monitor inputs and control outputs. Within the broader semiconductor hierarchy, the MC9S08SE4VTG belongs to the S08SE family of HCS08 microcontrollers, combining a small CPU core with communication interfaces, timing functions, and embedded memory. Its 20 MHz operating speed provides a practical balance between processing capability, power consumption, and design simplicity for cost-sensitive embedded systems. The verified product information identifies an 8-bit processor, 20 MHz speed, 4 KB (4K x 8) Flash, 256 x 8 RAM, 14 I/O pins, LINbus and SCI connectivity, PWM peripherals, low-voltage detection, and power-on reset. The MC9S08SE4VTG is packaged in a 16-TSSOP gull-wing package and is associated with an industrial temperature grade. These features make it appropriate for compact motor, control, sensing, communication, and industrial-control products. The S08SE family is positioned as a cost-effective 5 V MCU platform with pin, peripheral, and tool compatibility with the broader Freescale 5 V MCU portfolio. Firmware migration and board validation remain essential when changing between devices with different flash, RAM, peripheral, or pin assignments. The product page identifies the part as End of Life, so new production purchasing should be confirmed before committing to a design. Typical applications include low-cost sensor nodes, small motor controllers, keypad and display interfaces, industrial modules, and LIN-connected equipment. The MCU can use SCI for point-to-point serial communication and LINbus for automotive or industrial network interfaces, while PWM and general-purpose I/O support actuator and discrete-control functions. The 16-TSSOP package also helps reduce board footprint compared with larger through-hole packages. For new designs, verify supply status, pin mapping, memory limits, reset behavior, and peripheral configuration with the manufacturer datasheet and current NXP product documentation. This page consolidates the verified distributor and manufacturer search results, available technical attributes, lifecycle information, and sourcing context without inventing missing electrical details.

RFQ Contact
MC9S08SE4VWL - 8-Bit S08 MCU, 4KB Flash, LINbus | NXP
MC9S08SE4VWL

MC9S08SE4VWL - 8-Bit S08 MCU, 4KB Flash, LINbus | NXP

The NXP MC9S08SE4VWL is an 8-bit HCS08 S08-family microcontroller integrating a 20 MHz CPU core, 4 KB of on-chip Flash program memory, 256 bytes of RAM, and a 28-pin SOIC wide-body package. It provides 24 general-purpose I/O lines, LINbus and SCI communication peripherals, PWM, LVD and POR supervision, and is qualified for the industrial temperature range. Per the NXP part listing on DigiKey, the device is shipped in a 28-SOIC (0.295 inch / 7.50 mm width) package and is a member of NXP's low-cost S08SE family designed for LIN-slave body-electronics nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash or ROM), data memory (RAM), and a configurable set of peripherals (timers, ADCs, communication blocks, GPIOs). The 8-bit class targets cost-sensitive, deterministic embedded control where bit-manipulation and low-power sleep modes are valued more than raw compute throughput. Within the Freescale/NXP taxonomy the S08 (HCS08) sits below the Cortex-M0+ Coldfire+ parts as an entry-level node, and the S08SE sub-family in particular targets LIN-slave automotive body and appliance control. Key features of the MC9S08SE4VWL include a 20 MHz bus clock (typical instruction cycle ~50 ns at the maximum rated frequency), background-debug-mode (BDM) support for in-system programming, an internal clock source option, edge-triggered interrupts with a programmable priority scheme, and on-chip regulators supporting a single 3.3 V or 5 V supply. The 256-byte RAM and 4 KB Flash memory bound the device to small, deterministic control loops typical of seat modules, mirror adjusters, lighting clusters, and household appliances. The 28-SOIC wide-body footprint allows hand-solderable rework on legacy through-hole-style assemblies. Typical applications include automotive body-electronics LIN slave nodes (window lift, wiper controller, HVAC damper), major-appliance user-interface panels, simple sensor-conditioning front-ends, and industrial low-cost sensor read-out interfaces. The S08 instruction-set compatibility preserves software investment when migrating between S08 family members. When designing with this device, add a 100 nF decoupling capacitor within 2 mm of each supply pin, leave the LIN physical-layer transceiver external, and verify the BDM connector matches the standard 6-pin NXP BDM header or its 2-pin reduced-pinout variant. Programs migrating from S08QD/S08QG parts should recheck the integrated ADC channel-count, since the S08SE family has fewer analog channels than the QE/QG lines. This page synthesizes distributor stock positions, drop-in alternatives within the S08 family, and selection criteria not found in the manufacturer datasheet front-matter.

RFQ Contact
MC9S08SE8CRL - 20MHz 8-bit MCU with 8KB Flash | NXP
MC9S08SE8CRL

MC9S08SE8CRL - 20MHz 8-bit MCU with 8KB Flash | NXP

NXP Semiconductors MC9S08SE8CRL is an 8-bit HCS08 microcontroller operating at up to 20 MHz, with 8 KB of flash memory, 512 bytes of RAM, and 24 I/O pins in a 28-pin PDIP package. The device supports operation from 3.3 V to 5 V and uses a 10 MHz internal bus frequency. A microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals in one integrated device. The MC9S08SE8 belongs to the S08 family of 8-bit microcontrollers, a category commonly used for embedded control in appliances, industrial equipment, access systems, and compact consumer products. Its low-cost architecture provides a practical platform for reading inputs, controlling outputs, and executing firmware without a separate processor and support chips. The MC9S08SE8CRL's principal features include a 20 MHz HCS08 CPU, 8 KB flash memory, 512 bytes of RAM, 24 I/O lines, and operation across 3.3 V and 5 V supply levels. Listed peripherals include SCI communication, LIN bus capability, PWM, low-voltage detection, and power-on reset. These functions support connected embedded products without requiring a higher-complexity processor architecture. The HCS08 CPU operates at up to 20 MHz while the internal bus runs at 10 MHz. Flash memory supports firmware storage, while the 512-byte RAM provides working space for stack variables, register data, and short routines. The 24 available I/O pins allow external sensors, switches, indicators, actuators, and communication interfaces to be connected while leaving four package pins dedicated to power and control functions. Typical applications include appliance controllers, industrial interfaces, motor-control helpers, access-control equipment, and low-cost embedded control modules. SCI and LIN connectivity are useful when the controller must communicate with sensors, actuators, service tools, or other embedded nodes. PWM is applicable to lighting, fan, and basic motor-control functions, while the 5 V-compatible operating range supports conventional industrial and consumer electronics. When designing a PCB for this part, use the manufacturer datasheet pin description table to assign every 28-pin PDIP lead and preserve the required power connections. Review reset, clock, and programming interfaces before final routing. Because this is a legacy 8-bit MCU with a limited memory footprint, software should be sized around 8 KB of flash and 512 bytes of RAM rather than assuming resources comparable with a 32-bit microcontroller. This product record combines the manufacturer data sheet and reference manual with package details, interface characteristics, lifecycle information, and practical selection guidance. It also distinguishes the target from nearby devices whose memory, clock speed, package, or product status make them unsuitable as literal PCB drop-in replacements.

RFQ Contact
MC9S08SE8CTG - 20MHz 8-bit MCU, 8KB Flash | NXP (Tape & Reel)
MC9S08SE8CTG

MC9S08SE8CTG - 20MHz 8-bit MCU, 8KB Flash | NXP (Tape & Reel)

The NXP Semiconductors MC9S08SE8CTG is an 8-bit HCS08 microcontroller operating at up to 20 MHz, with 8 KB of Flash program memory, 512 bytes of RAM, and 14 I/O pins in a 16-TSSOP package. It is designed for compact embedded control systems that require deterministic 8-bit processing and integrated communication peripherals. A microcontroller is a semiconductor device that integrates a CPU, program memory, data memory, I/O, and peripherals into one embedded-control building block. The S08 MCU family belongs to the broader embedded processor and microcontroller hierarchy, combining a simple central processing unit with timers, serial interfaces, and communication functions for motor, appliance, and industrial-control systems. Key verified features include a 20 MHz HCS08 CPU, 10 MHz internal bus frequency, 8 KB (8K x 8) Flash memory, 512 x 8 RAM, 14 I/O pins, and SCI and LINbus connectivity. The device also includes low-voltage detection, power-on reset, and PWM peripherals according to the distributor and manufacturer-oriented data supplied. Its 16-TSSOP package supports compact surface-mount PCB layouts. The 8-bit architecture is appropriate for control loops, sensor conditioning, keypad scanning, actuator supervision, and low-to-medium-complexity embedded products. Flash memory supports firmware storage, while the serial communication peripherals enable connection to sensors, modules, or supervisory electronics. The 20 MHz CPU class supports responsive control without the complexity of a higher-bit processor. Typical uses include small motor controllers, appliance interfaces, embedded instrumentation, LIN-connected automotive or industrial subsystems, and compact consumer products. Designers should verify the complete pinout, electrical limits, oscillator configuration, and peripheral resource allocation in the manufacturer datasheet before finalizing a PCB or firmware. A key design consideration is decoupling and clock stability: place required bypass capacitors close to the supply pins and follow the manufacturer’s recommended oscillator and reset arrangements. Confirm that the selected 16-TSSOP footprint, programming method, and communication requirements match the target system before production. This page consolidates verified distributor specifications, sourcing information, package details, application context, and engineering caveats so engineers can evaluate the MC9S08SE8CTG against other embedded-control options without relying on unverified assumptions.

RFQ Contact
MC9S08SE8CTGR - 20MHz 8-bit MCU, 8KB Flash | NXP
MC9S08SE8CTGR

MC9S08SE8CTGR - 20MHz 8-bit MCU, 8KB Flash | NXP

The NXP Semiconductors MC9S08SE8CTGR is an 8-bit HCS08 microcontroller operating at up to 20 MHz, with 8 KB of Flash program memory, 512 bytes of RAM, and 14 I/O pins in a 16-TSSOP package. It is designed for compact embedded control systems that require deterministic 8-bit processing and integrated communication peripherals. A microcontroller is a semiconductor device that integrates a CPU, program memory, data memory, I/O, and peripherals into one embedded-control building block. The S08 MCU family belongs to the broader embedded processor and microcontroller hierarchy, combining a simple central processing unit with timers, serial interfaces, and communication functions for motor, appliance, and industrial-control systems. Key verified features include a 20 MHz HCS08 CPU, 10 MHz internal bus frequency, 8 KB (8K x 8) Flash memory, 512 x 8 RAM, 14 I/O pins, and SCI and LINbus connectivity. The device also includes low-voltage detection, power-on reset, and PWM peripherals according to the distributor and manufacturer-oriented data supplied. Its 16-TSSOP package supports compact surface-mount PCB layouts. The 8-bit architecture is appropriate for control loops, sensor conditioning, keypad scanning, actuator supervision, and low-to-medium-complexity embedded products. Flash memory supports firmware storage, while the serial communication peripherals enable connection to sensors, modules, or supervisory electronics. The 20 MHz CPU class supports responsive control without the complexity of a higher-bit processor. Typical uses include small motor controllers, appliance interfaces, embedded instrumentation, LIN-connected automotive or industrial subsystems, and compact consumer products. Designers should verify the complete pinout, electrical limits, oscillator configuration, and peripheral resource allocation in the manufacturer datasheet before finalizing a PCB or firmware. A key design consideration is decoupling and clock stability: place required bypass capacitors close to the supply pins and follow the manufacturer’s recommended oscillator and reset arrangements. Confirm that the selected 16-TSSOP footprint, programming method, and communication requirements match the target system before production. This page consolidates verified distributor specifications, sourcing information, package details, application context, and engineering caveats so engineers can evaluate the MC9S08SE8CTGR against other embedded-control options without relying on unverified assumptions.

RFQ Contact
MC9S08SE8CWL - 20MHz 8KB 8-Bit MCU | NXP | 28-SOIC
MC9S08SE8CWL

MC9S08SE8CWL - 20MHz 8KB 8-Bit MCU | NXP | 28-SOIC

The NXP Semiconductors MC9S08SE8CWL is an 8-bit S08SE-series microcontroller with a 20 MHz HCS08 CPU, 8 KB of flash program memory, and a 28-pin SOIC package. It operates from a 2.7 V to 5.5 V supply and includes a 10-bit ADC, 512 bytes of RAM, and an internal oscillator. The device is positioned as a low-cost 5 V MCU for compact embedded control designs. A microcontroller is a programmable integrated circuit containing a processor core, memory, and peripherals on one die. The S08 architecture belongs to the 8-bit embedded-control segment, where instruction simplicity, deterministic peripheral access, and broad I/O availability are often more important than maximum processing throughput. The MC9S08SE8CWL is therefore useful for control tasks involving digital inputs, analog measurement, timers, communications, and user-interface functions. Key device characteristics include 8 KB (8K x 8) flash memory, a 20 MHz CPU clock, a 10 MHz internal bus frequency, and a 10-channel 10-bit ADC. Its 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V systems. The 28-pin SOIC package provides a conventional surface-mount footprint while exposing enough pins for external sensors, actuators, communication interfaces, and general-purpose I/O. The S08SE family is designed to maintain compatibility with the wider Freescale Semiconductor 5 V MCU portfolio at the peripheral, pin, and tooling levels. Its flash memory supports field-programmable embedded applications, while the 10-bit ADC provides useful resolution for monitoring potentiometers, resistive sensors, and simple analog control loops without requiring a separate converter. Typical uses include low-cost appliance controllers, small industrial monitoring modules, digital thermometers, keypad interfaces, LED indicators, compact sensor nodes, and basic motor or actuator controllers. The 20 MHz clock provides adequate headroom for interrupt-driven control, while the 8 KB program-memory ceiling favors concise firmware and peripheral-heavy designs. Hardware design should preserve adequate decoupling at the supply pins and assign each analog input with suitable signal conditioning. Firmware should also account for the 8 KB flash limit, verify reset and interrupt behavior, and use the manufacturer's pin-description table when assigning the 28 available package connections. This page combines manufacturer specifications, package details, practical application guidance, and a qualification-focused comparison of candidate replacements. It is intended to help engineers assess compatibility before committing a 28-SOIC PCB design to the MC9S08SE8CWL.

RFQ Contact
MC9S08SE8MRL - 8-Bit S08 MCU, 8KB Flash, 20MHz | NXP | DIP-28
MC9S08SE8MRL

MC9S08SE8MRL - 8-Bit S08 MCU, 8KB Flash, 20MHz | NXP | DIP-28

The NXP MC9S08SE8MRL is an 8-bit HCS08 CISC microcontroller in the cost-effective S08SE family, featuring 8KB of Flash program memory, 20 MHz CPU clock, and a 28-pin PDIP through-hole package. It supports both 3.3V and 5V operation, includes on-chip peripherals such as PWM, LVD, WDT, and multi-protocol connectivity (I2C, LINbus, SCI, SPI), and offers 22 general-purpose I/O lines for flexible embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral subsystems onto one die. The S08 core used here is NXP's HCS08 8-bit CISC architecture targeting low-cost, deterministic embedded control. Within the broader taxonomy, the S08SE belongs to the 8-bit microcontroller class, sitting beneath 16-bit (S12) and 32-bit (Kinetis/ColdFire) families in NXP's portfolio, and is often chosen where simple I/O control, motor drive signaling, or LIN-bus slave communication is needed without the overhead of ARM-class silicon. Key features of the MC9S08SE8MRL include 8KB on-chip Flash with in-application reprogrammability, 20 MHz maximum bus clock derived from an internal oscillator or external crystal, multiple low-power modes for battery-friendly designs, hardware LVD (Low-Voltage Detect) for brown-out resilience, and an integrated watchdog timer. The 28-pin PDIP form factor is also well suited to breadboarding, education kits, and legacy through-hole designs where surface-mount is impractical. Typical applications include automotive body controllers, appliance control boards, consumer electronics user-interface modules, LIN-bus slave nodes, low-cost sensor hubs, and industrial remote/keypad modules. The wide 2.7V-5.5V supply range simplifies both 3.3V and 5V system designs. When designing with this part, ensure your emulator/debugger (such as the P&E Multilink or USB-BDM) supports the HCS08 BDM interface for code development and Flash programming. Decouple VDD/VSS with 100nF ceramic capacitors placed within 5mm of the pins, and respect the 5V absolute-maximum rating on I/O lines even when the MCU runs at 3.3V. This page synthesizes distributor stock data, NXP-original drop-in alternatives, and practical design notes not typically consolidated on a single supplier listing.

RFQ Contact