Counterfeit power semiconductors: what buyers should add to incoming-inspection checks

Good-Ark outlines a five-step defense against fake power diodes, from document and marking checks to X-ray, electrical, and decapsulation verification across the lot.

بڵاوکراوەتەوە نوێکراوەتەوە 5 خولەک خوێندنەوە ✓ ئامادەی AI ھاوبەشکردن

بە کورتی — سێ ڕستە

  • Good-Ark names three counterfeit entry paths for power semiconductors: recycled, re-marked, and cloned parts, with forged documents travelling alongside them (S1).
  • The guide treats the lot - marking quality, date-code spread, lead finish, and document coherence - as the unit of suspicion, not the individual part (S1).
  • Verification ladder runs visual, X-ray, electrical (forward voltage, hot reverse leakage, surge, thermal), XRF, and decapsulation, with depth tied to part criticality (S1).

وەرگیراوە لە key_takeaways (خانەی ڕاستەقینە، زۆرترین 3 تۆمار). ڕاستی و شیکاری بە جیا نیشانە کراون.

Counterfeit power semiconductors: what buyers should add to incoming-inspection checksEditorial cover for a component sourcing brief. Power motif; headline "Counterfeit power semiconductors: what buyers should add to incoming-inspection checks". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).Counterfeit power semiconductors: whatbuyers should add to incoming-inspectionchecksXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

لە وەڵامێکی AIەوە هاتوویت — ئەمە ئەسڵی پشتڕاستکراوەیە

لەوانەیە پوختەیەکی AI بنەمای داواکارییەکانی لەدەستدابێت. پێشبینییە ڕەسەنەکە، بەشەکانی تووشبوو و هەموو ئاماژەکان لەم پەڕەیەدان، هەریەکەیان بەرەو سەرچاوەکەی دەگەڕێتەوە.

پێشبینی XAIPART

ئەم کورتەیە پێشبینییەکی هەڵوەشێنراوەی تێدایە.

بەشەکانی تووشبوو

ھیچ گونجانێک لە کاتالۆگدا بۆ ئەم چیرۆکە نییە — ھیچ پیشان نادرێت لە جیاتی دەرھێنانی گونجان.

Reported by Good-Ark Electronics on October 11, 2026. Summarized and analyzed by XAIPART Editorial.

What happened

Good-Ark Electronics published a guide on avoiding counterfeit power semiconductors, framing the problem as a process covering entry paths, signal checks, equipment verification, authorized sourcing, and rapid reaction to suspect parts.S1

The guide identifies three entry paths: recycled parts pulled from scrap and re-marked, re-marked lower-grade dies relabeled as a higher grade, and cloned parts built to imitate the original without its qualification.S1 It warns that a counterfeit lot typically travels with a plausible datasheet, certificate, and packaging photo assembled from fragments of legitimate documentation.S1

On visual and document signals, the guide lists crispness of laser or pad marking, lead and package finish (solder residue, rework signs, polished lead surfaces), date-code spread across the lot, and document consistency between lot numbers, date codes, and the manufacturer's datasheet wording.S1 It places the lot - not a single part - as the unit of suspicion, since a mixed lot assembled from recycled stock reveals itself through incoherent codes or reprinted labels.S1

For verification depth, the guide recommends X-ray inspection of die size, bond-wire pattern, and lead-frame structure against a known-good reference, followed by electrical tests of forward voltage, reverse leakage at temperature, surge behavior, and thermal response against the datasheet range.S1 It also names X-ray fluorescence for materials and destructive decapsulation as a conclusive option when stakes justify it, and ties verification depth to part criticality: a safety-grade automotive device from a non-authorized source earns the full ladder of X-ray, electrical, and decapsulation, while an authorized benign part may close with visual and lot checks.S1

The guide closes by directing buyers to the Good-Ark official site as the authorized sales channel for product status, packaging, and qualification documents, and recommends that an authorized request specify part number, package, quantity, datasheet revision, qualification status, and material declarations up front.S1

Key numbers
MetricReported value
Counterfeit entry paths described3 (recycled, re-marked, cloned)S1
Verification layers listedVisual, X-ray, electrical, XRF, decapsulationS1
Electrical parameters cited for power-part screeningForward voltage, reverse leakage at temperature, surge behavior, thermal responseS1
Document items the buyer should requestDatasheet revision, qualification status, material declarations, packaging/lot infoS1

Background timeline

  1. No prior milestones disclosed by the source.

XAIPART take

Technical impact

The guide's electrical-screening checklist (forward voltage, reverse leakage at temperature, surge, thermal response) is already standard for incoming inspection of rectifiers and TVS diodes, but the emphasis on hot-leakage as the discriminator for re-marked lower-grade dies is the most actionable point for power-diode buyers sourcing through brokers.

Tying decapsulation to part criticality rather than to budget is the correct posture for automotive and safety lines; for benign consumer rails, lot-level document coherence and a 5- to 10-piece electrical sample are usually enough to clear risk before SMT.

Market impact

The framing - that allocation and long lead times push buyers to brokers and open-market listings, where fakes concentrate - matches what we see on power MOSFET, Schottky, and TVS lines that have been in allocation for multiple quarters. Lead-time pressure is still the dominant counterfeit vector, so any resourcing plan that re-routes a line item through authorized channels will pay back on returns, RMAs, and field-failure analysis.

Brokers listing date-code spreads inconsistent with the manufacturer's format, or quoting well below authorized distribution, remain the highest-probability counterfeit signal; both should trigger sample-based electrical and X-ray verification before release to production.

Action

For each active BOM line item on allocation, add a one-page incoming-inspection addendum covering marking and lead-finish checks, document/lot coherence, and a defined electrical sample matrix (forward voltage and hot-leakage at minimum) before parts reach SMT. File the inspection record with the BOM so the next revision of the part selection has an audit trail.

For automotive, medical, or any safety-class line sourced off-authorized channel, escalate to X-ray and decapsulation on the first mixed signal in the lot rather than after a field failure. For authorized-channel lines, keep the request packet narrow (part number, package, quantity, datasheet revision, qualification status, material declarations) so the channel returns traceable documents rather than generic marketing PDFs.

XAIPART Forecast

XAIPART expects that, within 9 months of this brief's publication, at least one major broker-listed power-diode MPN family flagged by the source's three signals (price far below market, irregular marking, or mismatched date-code spread) will surface in a public counterfeit advisory or recall; if no such advisory is filed against any major power-semi MPN by 2027-07-19, this forecast is wrong. XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The source frames the problem as a process rather than reporting incident counts; counterfeit-event figures, MPN-level statistics, and named broker investigations were not disclosed by Good-Ark and should be treated as unconfirmed until an industry body publishes them.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

جێگرەوەکان و چرخەی ژیان

جێگرەوە تۆمارکراوەکان — مەودای کاتالۆگ، نەک ڕیزبەندی بازاڕ
بەشپەیوەندیخولگەی ژیانبنەما
— ھیچ بەدیلێک لە تۆماردا نییە پێویستی بە داتا ھەیە — پێویستی پێیەتی match_type پێش ئەوەی هیچ نیشانەیەکی پێشوو دەربکەوێت

نیشانەکانی «پێشوو» و «بەدیل» تەنھا لە جۆرێکی گونجانی تۆمارکراو، دۆخی چرخەی ژیان، یان دەقی سەرچاوەوە دێن. لەو شوێنەی ھیچ گونجانێک تۆمار نەکراوە، ھیچ نیشانەیەک پیشان نادرێت. لیستەکانی خۆمان ئاماژەیەکی بازاڕ نین.

چی چاودێری بکەیت

پێشبینی ڕەتکراوە — سنوور، ماوە و دۆخی ئێستا. پێشبینییە ڕەتکراوەکان بە دیار دەمێننەوە.
داواکاریسنوورلەلایەندۆخ
XAIPART expects that, within 9 months of this brief's publication, at least one major broker-listed power-diode MPN family flagged by the source's three signals (price far below market, irregular marking, or mismatche... no such advisory is filed against any major power-semi MPN by 2027-07-19 Pending

ئەو پێشبینییانەی هەڵە دەردەچن بە دیار دەمێننەوە و نیشان دەدرێن. ئێمە لەناویان نابەین.

بەشەکانی تووشبوو

ھیچ گونجانێک لە کاتالۆگدا نییە. ئەم هەواڵە بۆ هیچ پارچەیەک کە ئێستا لە XAIPART لیستکراوە ناگونجێت. ئێمە هاوتایی نادۆزینەوە، و لیستێکی شوێنگرەوە نیشان نادەین.

فشاری تێچوو بەپێی ڕەهەند

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z 0.0276, neutral; Fx Energy z -0.0087, neutral. Composite index 0.1, band neutral.0Input costno readingSupply/demandz +0.0276 · neutral48 dFX & energyz −0.0087 · neutral5 dcomposite +0.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)48 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

ئەمە چۆن بەرهەم هێنرا

بەڵگەی پرۆسە — ھێنان، ڕاستی سەرچاوە، مۆدێل و دەروازە
شوێنپێی پشکنین بۆ ئەم کورتەنامەیە
Source fetched Good-Ark Electronics · blog.goodark.com · 6,026 chars
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 7,198 tokens · 37.4s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.015138 · C10 rounds 0

هەر ڕیزێکی سەرەوە لەلایەن پرۆسێسەکەوە بەرهەم دەهێنرێت، نەک بە دەست نووسرابێت.

نمرەی سەروەرێتی

ئەنجامی دەروازەی دیاریکراو — PHP ی خاوێن، هیچ مۆدێلێک لە بڕیاردانەکەدا بەشدار نییە
شیکردنەوەی نمرەی دەروازە 6 پشکنینەکانی جێبەجێکراو، 6دەرپەڕیوە: 100 لەسەد. Hold items: C3(insufficient_evidence), C13 (falsifiable forecast), C17 (timeline depth) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7818. پشکنینەکانی جێبەجێکراو تێپەڕێنراون 6 / 6 = 100% · بڕیار: hold Hold items: C3(insufficient_evidence), C13 (falsifiable forecast), C17 (timeline depth) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.7818 دەروازەکە بڕیار لە بڵاوکردنەوە دەدات. نمرەی وردبینی سەربەخۆ تەنها ڕاوێژییە.
هەڵەیەکت دۆزیوەتەوە؟ پێمان بڵێ چی هەڵەیە — ڕاستکردنەوەکان لەگەڵ دەقی ڕەسەن بڵاودەکرێنەوە و تۆمار دەکرێن. بە نهێنی وتارەکان دەستکاری ناکەین.

بۆچوونەکان

یەکەم کەس بە بۆچوون بنووسە.

سەرچاوەکان

  1. Avoiding counterfeit power semiconductors: sourcing and verification in a tight market — https://blog.goodark.com/?p=1762 · rss · سەردانکراوە

ڕاستییەکان بە S1/S2 نیشان دەدرێن و بۆ سەرچاوەی بەستەردراو دەگەڕێنەوە. ئەو دەقانەی نیشانکراون شیکاری بیرکردنەوەی خۆی XAIPARTن، جیاکراوە لە ڕاستییەکانی ڕاپۆرتکراو. بەستەرەکانی سەرچاوە شوێن دەکرێن نەک nofollow — دانانی سەرچاوە بە مەبەستە.