Reported by Good-Ark Electronics on October 11, 2026. Summarized and analyzed by XAIPART Editorial.
What happened
Good-Ark Electronics published a guide on avoiding counterfeit power semiconductors, framing the problem as a process covering entry paths, signal checks, equipment verification, authorized sourcing, and rapid reaction to suspect parts.S1
The guide identifies three entry paths: recycled parts pulled from scrap and re-marked, re-marked lower-grade dies relabeled as a higher grade, and cloned parts built to imitate the original without its qualification.S1 It warns that a counterfeit lot typically travels with a plausible datasheet, certificate, and packaging photo assembled from fragments of legitimate documentation.S1
On visual and document signals, the guide lists crispness of laser or pad marking, lead and package finish (solder residue, rework signs, polished lead surfaces), date-code spread across the lot, and document consistency between lot numbers, date codes, and the manufacturer's datasheet wording.S1 It places the lot - not a single part - as the unit of suspicion, since a mixed lot assembled from recycled stock reveals itself through incoherent codes or reprinted labels.S1
For verification depth, the guide recommends X-ray inspection of die size, bond-wire pattern, and lead-frame structure against a known-good reference, followed by electrical tests of forward voltage, reverse leakage at temperature, surge behavior, and thermal response against the datasheet range.S1 It also names X-ray fluorescence for materials and destructive decapsulation as a conclusive option when stakes justify it, and ties verification depth to part criticality: a safety-grade automotive device from a non-authorized source earns the full ladder of X-ray, electrical, and decapsulation, while an authorized benign part may close with visual and lot checks.S1
The guide closes by directing buyers to the Good-Ark official site as the authorized sales channel for product status, packaging, and qualification documents, and recommends that an authorized request specify part number, package, quantity, datasheet revision, qualification status, and material declarations up front.S1
| Metric | Reported value |
|---|---|
| Counterfeit entry paths described | 3 (recycled, re-marked, cloned)S1 |
| Verification layers listed | Visual, X-ray, electrical, XRF, decapsulationS1 |
| Electrical parameters cited for power-part screening | Forward voltage, reverse leakage at temperature, surge behavior, thermal responseS1 |
| Document items the buyer should request | Datasheet revision, qualification status, material declarations, packaging/lot infoS1 |
Background timeline
- No prior milestones disclosed by the source.
XAIPART take
Technical impact
The guide's electrical-screening checklist (forward voltage, reverse leakage at temperature, surge, thermal response) is already standard for incoming inspection of rectifiers and TVS diodes, but the emphasis on hot-leakage as the discriminator for re-marked lower-grade dies is the most actionable point for power-diode buyers sourcing through brokers.
Tying decapsulation to part criticality rather than to budget is the correct posture for automotive and safety lines; for benign consumer rails, lot-level document coherence and a 5- to 10-piece electrical sample are usually enough to clear risk before SMT.
Market impact
The framing - that allocation and long lead times push buyers to brokers and open-market listings, where fakes concentrate - matches what we see on power MOSFET, Schottky, and TVS lines that have been in allocation for multiple quarters. Lead-time pressure is still the dominant counterfeit vector, so any resourcing plan that re-routes a line item through authorized channels will pay back on returns, RMAs, and field-failure analysis.
Brokers listing date-code spreads inconsistent with the manufacturer's format, or quoting well below authorized distribution, remain the highest-probability counterfeit signal; both should trigger sample-based electrical and X-ray verification before release to production.
Action
For each active BOM line item on allocation, add a one-page incoming-inspection addendum covering marking and lead-finish checks, document/lot coherence, and a defined electrical sample matrix (forward voltage and hot-leakage at minimum) before parts reach SMT. File the inspection record with the BOM so the next revision of the part selection has an audit trail.
For automotive, medical, or any safety-class line sourced off-authorized channel, escalate to X-ray and decapsulation on the first mixed signal in the lot rather than after a field failure. For authorized-channel lines, keep the request packet narrow (part number, package, quantity, datasheet revision, qualification status, material declarations) so the channel returns traceable documents rather than generic marketing PDFs.
XAIPART Forecast
XAIPART expects that, within 9 months of this brief's publication, at least one major broker-listed power-diode MPN family flagged by the source's three signals (price far below market, irregular marking, or mismatched date-code spread) will surface in a public counterfeit advisory or recall; if no such advisory is filed against any major power-semi MPN by 2027-07-19, this forecast is wrong. XAIPART analysis
Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The source frames the problem as a process rather than reporting incident counts; counterfeit-event figures, MPN-level statistics, and named broker investigations were not disclosed by Good-Ark and should be treated as unconfirmed until an industry body publishes them.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
جایگزین‌ها و چرخه عمر
| قطعه | رابطه | چرخه عمر | مبنا |
|---|---|---|---|
| — | جایگزینی در پرونده نیست نیازمند داده | — | نیازمند match_type پیش از آنکه برچسب هر پیشینی ظاهر شود |
برچسب‌های «جانشین» و «جایگزین» فقط از نوع تطابق ثبت‌شده، وضعیت چرخه عمر یا متن منبع می‌آیند. جایی که تطابقی ثبت نشده باشد، برچسبی نمایش داده نمی‌شود. آگهی‌های خود ما مرجع بازار نیستند.
چه چیزی را زیر نظر بگیریم
| ادعا | آستانه | نویسنده | وضعیت |
|---|---|---|---|
| XAIPART expects that, within 9 months of this brief's publication, at least one major broker-listed power-diode MPN family flagged by the source's three signals (price far below market, irregular marking, or mismatche... | no such advisory is filed against any major power-semi MPN by 2027-07-19 | Pending |
پیش‌بینی‌هایی که نادرست از آب دربیایند قابل مشاهده و علامت‌گذاری‌شده باقی می‌مانند. ما آن‌ها را حذف نمی‌کنیم.
قطعات تحت تأثیر
تطابقی با کاتالوگ نیست. این خبر به هیچ قطعه‌ای که در حال حاضر در XAIPART فهرست شده مرتبط نیست. ما تطبیق حدسی انجام نمی‌دهیم و فهرست جایگزین نمایش نمی‌دهیم.
فشار هزینه بر اساس بُعد
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 46 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
این چگونه تولید شد
شواهد فرایند — واکشی، اعتبارسنجی منبع، مدل و دروازه
| Source fetched | Good-Ark Electronics · blog.goodark.com · 6,026 chars |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 7,198 tokens · 37.4s · run completed |
| Gate | verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.015138 · C10 rounds 0 |
هر ردیف بالا توسط خط لوله تولید می‌شود، نه با دست نوشته شده است.
نظرات
اولین نظر را شما بنویسید.
🔐 لطفاً وارد شوید برای ارسال نظر.
حساب کاربری ندارید؟ ثبتنام