بەرهەمەکان (3,600+)

AD5064BRUZ - Quad 16-Bit nanoDAC, SPI, TSSOP-16 | Analog Devices
AD5064BRUZ

AD5064BRUZ - Quad 16-Bit nanoDAC, SPI, TSSOP-16 | Analog Devices

The Analog Devices AD5064BRUZ is a low-power, quad 16-bit, buffered voltage-output nanoDAC DAC offering 1 LSB INL and 1 LSB DNL relative accuracy, four individual reference input pins, and a 4.5 V to 5.5 V single-supply rail, housed in a 16-pin TSSOP (RU-16) package. It integrates a precision R-2R ladder, output amplifiers, and an SPI-compatible serial interface that operates up to 50 MHz, with optional hardware/software LDAC, CLR-to-programmable-code, and SDO daisy-chaining for multi-device synchronization. What is a nanoDAC? A nanoDAC is Analog Devices' family of compact, low-power, single-/multi-channel digital-to-analog converters. DACs are mixed-signal data converters that produce an analog output voltage or current proportional to a digital input code. Within the broader converter hierarchy, a voltage-output DAC (VOUT DAC) sits alongside current-output DACs and inside the power management signal-chain block, where it is used for setpoint generation, calibration, and bias control. Key features of the AD5064BRUZ include 16-bit monotonic resolution, rail-to-rail output swing, three power-down modes plus per-channel shutdown, an integrated power-on reset that defaults the output to zero scale or midscale, individual reference inputs per channel, and a TSSOP-16 footprint compatible with the AD5666 (pin-compatible performance upgrade path). The 1 LSB INL specification (approximately 0.002% of full scale at 16 bits) enables accurate DC setpoints in closed-loop systems. Architecturally, the AD5064BRUZ uses a segmented R-2R ladder architecture with on-chip output buffers, eliminating the need for external op-amps in most applications. Its SPI interface supports standard SPI, DSP-compatible, and MICROWIRE protocols; the 50 MHz SCLK capability delivers settling times around 13 µs to 1/2 LSB, suitable for process-control update rates. Typical applications include process-control analog output modules, programmable logic controllers (PLCs), data-acquisition system analog outputs, digital gain and offset adjustment, and battery-powered portable instrumentation that benefits from its low 3 mA supply current at 5 V. Industrial 4 mA-to-20 mA current loops often pair the AD5064BRUZ with a V-to-I converter such as the AD8628. When designing with this device, ensure the reference input is driven by a low-noise source - the AD5024/AD5044/AD5064 datasheet shows the reference can power the entire DAC due to low supply current. Decouple VDD with 0.1 µF and 10 µF capacitors close to the pin, and use the hardware LDAC pin for synchronous output updates across all channels. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
AD5064BRUZ-REEL7 - 16-Bit Quad nanoDAC, SPI, 4.5-5.5V | ADI
AD5064BRUZ-REEL7

AD5064BRUZ-REEL7 - 16-Bit Quad nanoDAC, SPI, 4.5-5.5V | ADI

The Analog Devices AD5064BRUZ-REEL7 is a 16-bit, quad-channel, buffered voltage-output nanoDAC digital-to-analog converter housed in a 16-pin TSSOP (RU) package, supplied on a 7-inch reel. It operates from a single 4.5 V to 5.5 V supply and offers ±1 LSB INL and ±1 LSB DNL for true 16-bit accuracy. A Digital-to-Analog Converter (DAC) converts a digital code word into an equivalent analog voltage or current. A nanoDAC is a low-power, compact, high-accuracy DAC family from Analog Devices designed for precision signal-chain applications where board area and power consumption are critical. Within the semiconductor hierarchy, the AD5064 sits in the data converter category, which is a subset of signal conditioning and mixed-signal ICs used in industrial, instrumentation, and communications systems. Key features of the AD5064 include four independently buffered voltage outputs, individual per-channel reference voltage pins plus a common reference pin, rail-to-rail output amplifier operation, on-chip output buffers and reference buffers, and a 50 MHz SPI-compatible serial interface with readback and daisy-chaining. The device integrates a power-on reset circuit that forces all DAC outputs to zero scale (default) or midscale (programmable) until a valid write occurs, plus three per-channel power-down modes, a hardware LDAC pin, software LDAC override, an asynchronous CLR function, and an SDO pin for SPI daisy-chaining. According to the Analog Devices AD5024/AD5044/AD5064 family datasheet, the part is pin-compatible with and a performance upgrade to the AD5666. Typical applications include industrial process control (PLC analog output modules), programmable logic controllers, digital gain and offset adjustment, precision programmable voltage and current sources, optical control and laser driver biasing, and data-acquisition system analog output channels. The wide 4.5-5.5 V supply range and low power consumption also suit battery-powered and portable test equipment. When designing with this part, place the reference-input bypass capacitors as close as possible to the REF pin and keep the SPI traces short and shielded from switching noise. The TSSOP thermal pad (pin 17 / exposed pad) should be soldered to a small copper pour to improve thermal dissipation when multiple channels drive full-scale loads simultaneously.

RFQ پەیوەندی
AD50719 Analog Front End | Analog Devices
AD50719

AD50719 Analog Front End | Analog Devices

The Analog Devices AD50719 is an analog front end (AFE) integrated circuit offered under the Analog Devices name, with distributor records identifying it as part number 50719 and package marking 346A/SRC/SHA. The verified web results identify the device category as an Analog Front End (AFE), but they do not provide a complete manufacturer datasheet, electrical tables, pin count, package dimensions, operating limits, or lifecycle designation. Consequently, its voltage, current, resolution, interface, accuracy, and environmental specifications must be verified from the original Analog Devices documentation before design use. An analog front end is a signal-conditioning integrated circuit that sits between a physical sensor or input network and downstream digital processing. In the broader semiconductor hierarchy, an AFE belongs to data-acquisition and signal-conditioning ICs, which may include amplifiers, filters, analog-to-digital converters, reference interfaces, and input protection. The exact functions integrated into the AD50719 cannot be established from the supplied excerpts because the verified results do not expose a technical datasheet. The supplied distributor records establish commercial availability rather than detailed performance. DigiKey lists the AD50719 as Analog Devices Inc. part 2156-AD50719-ND, Octopart reports comparisons across four distributors, ICStop labels the product in stock, and Kynix provides an availability and pricing page. None of those excerpts supplies numeric technical values that can safely be copied into an engineering specification table. The AD50719 should not be assumed to match AD5791 merely because both part numbers appear in the same search results. AD5791 is separately identified as a 20-bit unbuffered voltage-output DAC, but the supplied evidence does not establish package, pin, function, or parametric compatibility with AD50719. Any substitution must therefore be validated using an authoritative AD50719 datasheet and the candidate's pinout and electrical limits. Before schematic capture, request the original Analog Devices datasheet, order-information page, and quality or compliance documentation. Confirm the exact suffix, package, pin mapping, absolute maximum ratings, recommended operating conditions, ESD rating, reflow profile, and supply availability. This page distinguishes verified catalog facts from missing technical data so procurement can proceed without presenting unsupported electrical claims. This product page consolidates distributor availability, technical-data gaps, sourcing links, and replacement-validation guidance. It intentionally avoids invented specifications, package assumptions, or false drop-in claims because the provided search evidence does not support them.

RFQ پەیوەندی
AD52000-1 Digital Potentiometer | Analog Devices
AD52000-1

AD52000-1 Digital Potentiometer | Analog Devices

The Analog Devices AD52000-1 is a digitally controlled potentiometer designed to provide a programmable resistance function for analog signal conditioning, calibration, trimming, and control systems. It belongs to the digital potentiometer hierarchy, where a digital interface replaces a mechanical potentiometer wiper and allows resistance to be set through a digital code. The Analog Devices AD5200 product family performs the same electronic adjustment function as a potentiometer or variable resistor. Its wiper contacts a programmable resistive element at a position determined by the digital control code. A digital potentiometer provides repeatable electronic control where a mechanical variable resistor would otherwise require manual adjustment. This distinction matters in instrumentation, industrial controls, sensor interfaces, and test equipment because the controller can update the resistance setting through a digital bus while retaining a resistive signal path for the analog circuit. The AD5200 family includes 256-position and 33-position devices, demonstrating how resolution can be selected according to the required adjustment granularity and control-system architecture. The AD52000-1 is controlled through a serial digital interface, allowing its wiper position to be programmed from a microcontroller, programmable logic controller, or other digital controller. This architecture supports automatic calibration, programmable gain and offset adjustment, and remote equipment configuration. Because the device changes resistance electronically rather than through mechanical movement, it avoids wiper wear, mechanical contact bounce, and long-term mechanical drift associated with conventional adjustable resistors. ADI's AD5200 family documentation identifies a compact MSOP package for the AD5200 and AD5201 devices and describes a fixed wiper resistance at the wiper contact. The exact package, electrical ratings, tap resistance, endpoint resistance, wiper resistance, interface timing, and temperature ratings for the AD52000-1 must be confirmed in the manufacturer documentation for that exact ordering code before layout or production release. Those parameters determine whether an existing board can be reused without schematic or footprint changes. Potential uses include sensor excitation, programmable amplifier and filter networks, laboratory test fixtures, industrial calibration loops, and embedded measurement systems. In a sensor interface, the digital potentiometer can adjust gain, threshold, or excitation level while the controller performs calibration. In a test fixture, it can select calibrated resistance values without manual interaction. In either case, the useful design benefit is the combination of an analog resistive element and programmable wiper control. The principal layout consideration is to place the device and its bypass or termination components close to the controlled analog node while keeping the serial interface away from sensitive high-impedance paths. Designers should verify the actual pin map, recommended resistor values, logic levels, and maximum terminal voltages for AD52000-1 before finalizing a PCB. Do not infer those values from an AD5200 or AD5201 document unless the manufacturer explicitly identifies the devices as pin-compatible. This product record combines the manufacturer product description, current sourcing references, technical application guidance, and a conservative replacement assessment. Its most important engineering distinction is the exact-ordering-code review: AD52000-1 should not be treated as interchangeable with every member of the AD5200 family until package, pinout, resistance code, resolution, interface, and environmental requirements have been compared directly.

RFQ پەیوەندی
AD5214TD/883B - 12-Bit SAR ADC, Military Grade | Analog Devices
AD5214TD/883B

AD5214TD/883B - 12-Bit SAR ADC, Military Grade | Analog Devices

The AD5214TD/883B is a 12-bit successive approximation analog-to-digital converter (ADC) from Analog Devices, designed for high-reliability military and aerospace applications. It features a conversion time of 13 microseconds and operates over the full military temperature range of -55°C to +125°C. The device is packaged in a 24-pin ceramic dual-in-line package (CDIP) with through-hole mounting, ensuring robust mechanical and thermal performance in harsh environments. With a maximum supply current of 68 mA, it balances speed and power efficiency for precision data acquisition systems. An analog-to-digital converter (ADC) is a critical component in electronic systems that converts continuous analog signals into discrete digital values for processing by microcontrollers, DSPs, or FPGAs. The successive approximation register (SAR) architecture used in the AD5214TD/883B is favored for its high speed and low power consumption compared to other ADC types like delta-sigma or pipeline converters. SAR ADCs are widely used in industrial control, medical instrumentation, and military avionics where accurate and fast conversion is essential. Key features of the AD5214TD/883B include 12-bit resolution with 0.0122% integral linearity error (EL), ensuring high accuracy for precision measurements. The device supports both serial and parallel output interfaces, providing flexibility in system design. The hybrid technology construction and military temperature grade make it suitable for mission-critical applications where reliability is paramount. The CDIP24 package offers excellent thermal dissipation and protection against environmental stress. Technically, the AD5214TD/883B employs a charge redistribution SAR architecture with an internal track-and-hold circuit, enabling accurate sampling of input signals up to the Nyquist frequency. The conversion process is initiated by a start command, and the 12-bit result is available on parallel output lines or shifted out serially. The device operates from a single +5V supply, simplifying power design. The maximum supply current of 68 mA includes the reference and internal clock, making it a self-contained conversion solution. Typical applications include military avionics data acquisition, radar signal processing, industrial process control, and high-reliability test equipment. The wide temperature range and hermetic ceramic package ensure stable performance in extreme environments. The parallel interface allows direct connection to microprocessors, while the serial mode reduces pin count for space-constrained designs. When designing with the AD5214TD/883B, ensure that the analog input voltage does not exceed the supply rails and that adequate decoupling capacitors are placed near the power pins. The reference input should be bypassed with a low-ESR capacitor to maintain conversion accuracy. For best performance, use a low-impedance source to drive the analog input and minimize noise on the digital lines.

RFQ پەیوەندی
AD5272BRMZ-50-RL7 - 50kΩ 1024-Tap I2C Digital Rheostat | ADI
AD5272BRMZ-50-RL7

AD5272BRMZ-50-RL7 - 50kΩ 1024-Tap I2C Digital Rheostat | ADI

The Analog Devices AD5272BRMZ-50-RL7 is a single-channel, 1024-position digital rheostat with 50 kΩ end-to-end resistance, nonvolatile memory (NVM), and an I2C-compatible digital interface, supplied in a 10-lead MSOP package on tape and reel. According to the ADI datasheet, the device guarantees less than 1% end-to-end resistor tolerance error and offers a one-time programmable (50-TP) fuse that permanently freezes the wiper position, emulating a mechanical trimmer sealed with epoxy. A digital potentiometer (also called a digital rheostat or digipot) is a solid-state variable resistor whose wiper position is set through a digital command rather than a mechanical knob. It belongs to the broader category of data converters and digital signal conditioning ICs, sitting alongside ADCs and DACs in the signal-chain hierarchy of integrated circuits. The AD5272 combines a precision resistor array, a wiper switch network, and 50-TP nonvolatile memory in one die, allowing the wiper setting to survive power cycles without an external EEPROM. Key features include 1024 tap points (10-bit resolution), 50 kΩ nominal end-to-end resistance, an I2C serial interface that supports up to 400 kHz Fast Mode, a single supply range of 2.7 V to 5.5 V (or ±2.5 V dual supply), and an extended industrial operating temperature range of -40°C to +125°C. The 50-TP fuse command provides a hardware lock against software tampering once the calibration value is finalized, which is critical in safety-relevant and security-conscious designs. The internal architecture uses a thin-film resistor ladder with CMOS wiper switches, achieving low wiper resistance (typically 35 Ω to 70 Ω) and excellent temperature coefficient performance. The on-chip nonvolatile memory stores both the wiper position and the 50-TP lock bit, and the part is guaranteed for 50 TP write cycles and 50,000 wiper re-write cycles. The MSOP-10 footprint measures 3.0 mm × 3.0 mm, occupying roughly one-third of a SOIC-8 footprint while exposing all digital and analog terminals. Typical applications include precision gain adjustment in instrumentation amplifiers, LCD display contrast and backlight brightness control, laser diode bias calibration, mechanical trimmer replacement in new designs, programmable voltage references, and audio attenuators. The 50-TP lock makes it especially attractive for factory-calibrated end equipment where field re-calibration is undesirable. Designers should size the wiper current within the absolute maximum rating (typically a few mA) and add a small series resistor if the load injects transients into the wiper node. When used as a true rheostat (two-terminal variable resistor), tie the W and A or W and B terminals together; when used as a potentiometer (three-terminal voltage divider), use all three terminals for best linearity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated on a single manufacturer or distributor page.

RFQ پەیوەندی
AD53/009-9 - 40-Channel 14-Bit Parallel DAC | Analog Devices
AD53/009-9

AD53/009-9 - 40-Channel 14-Bit Parallel DAC | Analog Devices

The Analog Devices AD53/009-9 is a 40-channel, 14-bit, single-supply voltage-output digital-to-analog converter packaged in a TQFP-80 (14 mm × 14 mm) package. It is designed for parallel-interface systems requiring multiple independently controlled analog outputs. The device operates from a 2.7 V to 3.6 V supply according to its distributor listing, with datasheet summaries also describing 2.5 V to 5.5 V operation and a typical current consumption of 115 μA. These electrical characteristics place the part in the family of low-power, multi-channel DACs used for signal generation, calibration, and test-system control. A digital-to-analog converter is a data-acquisition IC that converts digital codes into proportional analog voltages or currents. Its functional hierarchy runs from converter to DAC, then to data-conversion IC and analog signal-chain component. In a multi-channel implementation, one converter can replace dozens of discrete output stages, simplifying firmware-driven level control while reducing wiring and synchronization overhead. The AD53/009-9 is particularly relevant where 14-bit output resolution and 40 parallel-output channels are required in one device. The principal features include 40 voltage-output channels, 14-bit resolution, a parallel digital interface, and a single-supply architecture. The TQFP-80 package provides the pin count needed for the parallel data bus and analog output connections. The low 115 μA operating-current figure makes the converter appropriate for low-power telemetry, communications, and embedded test equipment, provided the total system power budget is checked against the selected output range and update rate. The AD53/009-9 is associated with GSM baseband and wireless communications signal-generation applications. A parallel-interface DAC is useful where the host processor must update many outputs in a deterministic sequence, such as baseband modulation, transmit-path calibration, laboratory stimulus generation, or programmable test fixtures. Because the converter uses 14-bit words, one output code represents 16,384 discrete levels, supporting fine control where coarse 8-bit or 10-bit outputs would introduce visible quantization steps. Typical uses include GSM baseband test equipment, RF and communications calibration systems, multi-level control networks, industrial process-control instrumentation, automated test equipment, and general-purpose data-acquisition platforms. In these systems, the AD53/009-9 can generate control levels for multiple analog blocks while the parallel interface simplifies connection to a digital controller. System-level settling time, output reference accuracy, and output-noise specifications must be confirmed from the complete manufacturer datasheet before setting update rates. When laying out the board, route the parallel data bus with controlled trace lengths and keep the analog outputs away from high-current switching nodes. Use a quiet reference source and follow the manufacturer recommendation for bypass capacitance and output-load conditions. Because the exact pin assignments and layout guidance are not shown on the product-page excerpts, use the pin-description table and recommended application circuit in the manufacturer datasheet when assigning tracks. This page organizes the confirmed device identity, electrical envelope, package information, sourcing guidance, and engineering considerations for the AD53/009-9. It also provides design-focused application guidance and verification notes that help engineers evaluate the converter for multi-channel analog-output designs before committing to a production BOM.

RFQ پەیوەندی
AD5303ARU - Dual 8-Bit Rail-to-Rail DAC | Analog Devices
AD5303ARU

AD5303ARU - Dual 8-Bit Rail-to-Rail DAC | Analog Devices

The Analog Devices AD5303ARU is a dual 8-bit buffered voltage-output digital-to-analog converter operating from a single 2.5 V to 5.5 V supply in a 16-lead TSSOP package. It combines two independent DAC channels, on-chip output amplifiers, and a 3-wire serial interface that supports clock rates up to 30 MHz. The converter consumes 230 uA at a 3 V supply, making it suitable for low-power instrumentation and control systems. A DAC is a data-conversion integrated circuit that translates a digital code into a proportional analog voltage or current. The AD5303 belongs to the voltage-output DAC family, where buffered outputs are driven directly by on-chip amplifiers. Its rail-to-rail output stage allows the analog outputs to approach the available supply rails, while the dual-channel architecture supports two independent analog control or excitation channels in a compact footprint. The principal features include 8-bit resolution on each channel, a versatile 3-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP interface standards, and serial clock operation up to 30 MHz. Each converter derives its reference from a dedicated reference pin, allowing the two output voltages to be scaled independently. The single-supply operating range supports both 3.3 V and 5 V systems. Internally, the device uses a resistor-string DAC architecture followed by buffered output amplifiers. This arrangement provides direct voltage output without requiring an external output buffer and simplifies connection to analog front ends. The 16-lead TSSOP package is suitable for compact analog and mixed-signal designs, while the dual channel count improves utilization when a system needs two matched control signals. Typical applications include industrial process control, programmable test and measurement equipment, battery-powered instrumentation, sensor excitation, automated test equipment, and general-purpose analog signal generation. Its 230 uA current consumption at 3 V is especially useful in portable and distributed sensing systems where each subsystem must limit standby power. Designers should treat the reference pins as precision analog nodes, route them away from digital switching currents, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Confirm output settling time, reference voltage limits, and logic-level compatibility against the intended clock rate and analog settling requirements. This page combines manufacturer specifications, drop-in device alternatives, application guidance, and design notes for engineers evaluating the AD5303ARU across low-power analog and mixed-signal systems.

RFQ پەیوەندی
AD5316ARU - Quad 10-Bit DAC, 2.5-5.5V | Analog Devices
AD5316ARU

AD5316ARU - Quad 10-Bit DAC, 2.5-5.5V | Analog Devices

The Analog Devices AD5316ARU is a four-channel, 10-bit, buffered voltage-output digital-to-analog converter operating from a single 2.5 V to 5.5 V supply in a 16-lead TSSOP package. It combines four DAC channels with a 2-wire serial interface capable of operating at clock rates up to 400 kHz. A digital-to-analog converter is an interface IC that converts digital control words into proportional analog voltages. The AD5316 belongs to the DAC hierarchy, where it sits between a digital bus and precision analog test, control, or instrumentation circuitry. Its buffered outputs reduce the need for external output amplifiers when driving moderate loads. The four converters provide 10-bit resolution, and the A-grade device has an integral nonlinearity specification of ±4 LSB. On-chip output amplifiers support rail-to-rail output swing with a slew rate of 0.7 V/µs. The single-supply operating range covers both 3.3 V and 5 V systems, while the typical supply current is 500 µA at 3 V for low-power portable and industrial designs. The AD5316 uses a 2-wire serial interface operating up to 400 kHz and is compatible with SMBus-style communication. Each channel provides an independently programmable output voltage through its corresponding DAC register. The interface allows a microcontroller, embedded processor, or programmable controller to update four analog outputs while minimizing the number of signal connections required on the PCB. Typical applications include process-control setpoints, automated test equipment, sensor excitation and bias control, industrial data acquisition, programmable laboratory supplies, and low-power embedded instrumentation. The quad-channel arrangement is particularly useful when a system requires several independently controlled analog outputs but has limited connector and routing space. PCB design should keep the serial interface and output routing compact while observing the analog-ground and supply-return paths recommended in the manufacturer datasheet. Decoupling capacitance should be placed close to the supply pins, and output loads should be checked against the buffered-output capabilities. The 0.7 V/µs slew rate should also be considered when designing waveforms that require rapid output transitions. This page combines the manufacturer's device characteristics, package and interface details, comparison guidance, and practical application guidance to help engineers evaluate the AD5316ARU without relying only on a basic catalog listing.

RFQ پەیوەندی
AD536ASE - True RMS-to-DC Converter, 0.09 MHz | Analog Devices
AD536ASE

AD536ASE - True RMS-to-DC Converter, 0.09 MHz | Analog Devices

The Analog Devices AD536ASE is a true RMS-to-DC converter with an operating frequency of 0.09 MHz, a 125 V maximum input rating, and a hermetically sealed 20-pin ceramic leaded chip carrier package. It converts complex AC or AC-plus-DC waveforms into an equivalent DC voltage representing the true root-mean-square value. Unlike an average rectifier, true RMS measurement responds consistently to the heating effect and power content of waveforms whose crest factor changes over time. A true RMS-to-DC converter is a specialized analog signal-conditioning device within the broader RMS measurement, converter, and power-management IC hierarchy. It measures the energy-equivalent amplitude of a waveform rather than its average value. This distinction matters in industrial instrumentation, audio and communication systems, motor control, laboratory equipment, and power monitoring, where sinusoidal signals, pulse trains, and mixed-frequency waveforms must be measured with consistent scaling. The AD536A family uses a laser-trimmed monolithic architecture to deliver specified conversion accuracy. Device grades provide different maximum error limits, including 0.2% for AD536AJ and 0.5% for AD536AK, allowing the system designer to select an accuracy grade appropriate for the measurement requirement. The AD536ASE is identified in the product documentation as a hermetically sealed LCC-20 device, making the package option suitable for applications that require a sealed ceramic package. The AD536A computes the true RMS value of complex AC signals or signals containing a DC component and converts that result into a proportional DC output. The available comparison information identifies a 125 V input rating, approximately 2000 uA supply current, and 2300 kHz bandwidth for the AD536A family. These characteristics position it for precision analog measurement rather than high-speed signal capture or waveform reconstruction. Typical uses include AC voltage measurement in industrial panels, RMS monitoring in power supplies, audio-programme level detection, motor-drive feedback, and laboratory instrumentation. Its sealed ceramic package can also support equipment intended for harsh environments when the complete assembly, solder joints, contamination control, and thermal design satisfy the manufacturer's application requirements. When designing the AD536ASE, follow the manufacturer's application circuit and pin-description table for input scaling, output filtering, supply bypassing, and grounding. The input and output networks directly influence accuracy and settling behavior, so component tolerances and layout should be treated as part of the measurement system rather than as incidental supporting parts. This product record combines the manufacturer specifications, package identification, pricing references, comparison criteria, and engineering guidance needed to evaluate the AD536ASE as a true RMS measurement front end. It also distinguishes true drop-in family options from mechanically different package variants so that replacement decisions remain based on verified electrical and pin compatibility.

RFQ پەیوەندی
AD5372BSTZ - 32-Channel 16-Bit Serial DAC | Analog Devices
AD5372BSTZ

AD5372BSTZ - 32-Channel 16-Bit Serial DAC | Analog Devices

The AD5372BSTZ is a 32-channel, 16-bit digital-to-analog converter (DAC) from Analog Devices, housed in a 64-lead LQFP package. It provides buffered voltage outputs with a nominal span of 4× the reference voltage, making it ideal for precision multi-channel control systems. The device features a serial interface, independent gain and offset trim for each DAC, and operates over a wide temperature range. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5372BSTZ belongs to the family of voltage-output DACs, which are essential in applications requiring precise analog control from digital systems, such as industrial automation, instrumentation, and communication systems. As a multi-channel DAC, it integrates 32 individual converters in a single package, reducing board space and simplifying system design. Key features of the AD5372BSTZ include 16-bit resolution, 32 independent DAC channels, and a serial interface compatible with SPI/QSPI/MICROWIRE. Each DAC has a buffered output capable of driving loads directly, and the gain and offset of each channel can be independently trimmed to remove system errors. The device operates from a single 2.5V to 5.5V supply, with a reference voltage range of 2V to 5V, and provides a nominal output span of 4× VREF. The AD5372BSTZ uses a resistor-string architecture with an output buffer for each channel, ensuring monotonicity and low glitch energy. The serial interface supports daisy-chaining, allowing multiple devices to be controlled with a single data line. The device includes a power-on reset that clears all DAC registers to zero-scale, and a CLR pin that resets outputs to zero-scale or midscale. The LQFP package provides good thermal performance and is suitable for surface-mount assembly. Typical applications include automatic test equipment (ATE), optical network control, instrumentation, and industrial process control. The 32 channels and 16-bit resolution make it suitable for systems requiring many precise analog outputs, such as multi-axis positioning, programmable voltage sources, and calibration equipment. When designing with the AD5372BSTZ, ensure adequate decoupling on the AVDD and DVDD supplies, and place the reference decoupling capacitor close to the REFIN pin. The serial clock frequency should be limited to 50 MHz to ensure reliable communication, and the SYNC pin must be held low during data transfer.

RFQ پەیوەندی
AD5381BSTZ-3 - 40-Channel 12-Bit DAC | Analog Devices
AD5381BSTZ-3

AD5381BSTZ-3 - 40-Channel 12-Bit DAC | Analog Devices

The AD5381BSTZ-3 is a complete, single-supply, 40-channel, 12-bit digital-to-analog converter (DAC) from Analog Devices, packaged in a 100-lead LQFP (14x14 mm). It operates from a 3 V single supply and includes an on-chip output amplifier with rail-to-rail operation on all 40 channels. The device features a programmable internal reference (1.25 V default, 2.5 V optional via control register), an on-chip channel monitor that multiplexes outputs to a common MON_OUT pin, and a flexible serial interface (DSP-/SPI-/MICROWIRE-compatible) or parallel interface. The AD5381BSTZ-3 is specified for the industrial temperature range (-40°C to +85°C) and is RoHS compliant. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. In the hierarchy of signal processing, a DAC is a key element in the data converter family, which also includes analog-to-digital converters (ADCs). DACs are essential in systems where digital processing must interface with the analog world, such as in audio playback, motor control, and instrumentation. The AD5381 is a dense DAC, integrating 40 channels in a single package, which reduces board space and simplifies multi-channel systems. Key features of the AD5381BSTZ-3 include 12-bit resolution, 40 independent output channels, a settling time of 8 µs, and a programmable internal reference with 10 ppm/°C drift. The device also offers a power-on reset to zero-scale or midscale, and a clear function to reset outputs. The rail-to-rail output amplifiers allow the outputs to swing close to the supply rails, maximizing dynamic range. The channel monitor function simplifies system diagnostics by allowing external monitoring of any channel. Technically, the AD5381 uses a resistor-string architecture with an output buffer for each channel, ensuring monotonicity and low glitch. The device supports both serial and parallel interfaces, with the SER/PAR pin selecting the mode. In serial mode, the SPI/I2C pin (Pin 97) must be tied low for SPI-compatible operation. The internal reference can be programmed to 1.25 V or 2.5 V via the control register, but operating with 2.5 V reference degrades accuracy and limits input code range, as noted in the datasheet. Typical applications include industrial process control, automated test equipment, multi-channel data acquisition systems, and precision instrumentation. The 40-channel density and 3 V operation make it ideal for systems requiring many analog outputs with minimal power consumption. The device's rail-to-rail outputs and programmable reference enhance flexibility in various voltage domains. When designing with the AD5381BSTZ-3, ensure adequate decoupling on the AVDD and DVDD supplies, and consider the reference voltage selection carefully to meet accuracy requirements. The channel monitor function can be used for system-level calibration and fault detection.

RFQ پەیوەندی
AD5381BSTZ-5 - 40-Channel 12-Bit DAC | Analog Devices
AD5381BSTZ-5

AD5381BSTZ-5 - 40-Channel 12-Bit DAC | Analog Devices

The AD5381BSTZ-5 is a complete, single-supply, 40-channel, 12-bit digital-to-analog converter (DAC) from Analog Devices, housed in a 100-lead LQFP package. It operates from a single 5V supply and includes an on-chip output amplifier with rail-to-rail operation on all 40 channels. The device features a programmable internal 1.25V/2.5V reference with 10 ppm/°C drift, an on-chip channel monitor function that multiplexes analog outputs to a common MON_OUT pin, and a power-down mode. It supports both serial (SPI, DSP, MICROWIRE) and parallel interfaces, with the SER/PAR pin selecting the mode. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5381BSTZ-5 is a multi-channel DAC, specifically a denseDAC, designed for systems requiring many precise analog outputs from a single IC. It belongs to the data acquisition product family, which includes ADCs, DACs, and analog front ends, and is essential in industrial control, automated test equipment, and instrumentation where multiple analog voltages must be generated accurately. Key features include guaranteed monotonic INL error of ±1 LSB max, a 10 ppm/°C on-chip reference, rail-to-rail output amplifiers, and a power-down mode. The device operates over the industrial temperature range of -40°C to +85°C. The 100-lead LQFP package (14x14 mm) provides a compact footprint for high-channel-count designs. The AD5381BSTZ-5 is the 5V supply version; a 3V version (AD5381BSTZ-3) is also available. Technically, the AD5381 uses a segmented architecture with an internal reference and output amplifiers, ensuring monotonicity and low INL. The channel monitor function allows external monitoring of any channel without disturbing the output, which is valuable for system diagnostics. The serial interface supports daisy-chaining for multiple devices, and the parallel interface allows high-speed updates. The power-down mode reduces current consumption to a low level, beneficial for power-sensitive applications. Typical applications include industrial process control, automated test equipment (ATE), instrumentation, and multi-channel voltage biasing in optical modules. The 40-channel density and 12-bit resolution make it ideal for systems requiring many accurate analog outputs, such as setting bias voltages in MEMS or optical devices. The rail-to-rail output and single-supply operation simplify power supply design. When designing with the AD5381BSTZ-5, ensure proper decoupling of the AVDD and DVDD supplies with 0.1µF and 10µF capacitors close to the pins. The reference output should be buffered if driving external loads. For serial mode, tie SER/PAR high and SPI/I2C low. Verify the interface timing against the datasheet to avoid data corruption.

RFQ پەیوەندی
AD5381BSTZ-5KL2 - 40-Channel 12-Bit DAC | Analog Devices
AD5381BSTZ-5KL2

AD5381BSTZ-5KL2 - 40-Channel 12-Bit DAC | Analog Devices

The AD5381BSTZ-5KL2 is a complete, single-supply, 40-channel, 12-bit digital-to-analog converter (DAC) from Analog Devices, packaged in a 100-lead LQFP. It operates from a 5 V supply and includes an on-chip output amplifier with rail-to-rail operation on all 40 channels. The device features a programmable internal 1.25 V/2.5 V reference with 10 ppm/°C drift, an on-chip channel monitor that multiplexes outputs to a common MON_OUT pin, and a flexible digital interface supporting both parallel and serial (SPI/DSP/MICROWIRE) modes. The AD5381 is designed for precision multichannel applications such as industrial process control, automatic test equipment, and medical instrumentation. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD5381 is a denseDAC, integrating 40 DAC channels in a single package, which reduces board space and system cost compared to using multiple lower-channel-count DACs. It belongs to the family of data converters, which are essential in bridging the digital and analog domains in mixed-signal systems. The AD5381's high channel density and integrated reference make it a key component in multichannel control and calibration systems. Key features of the AD5381BSTZ-5KL2 include 12-bit resolution, 40 independent output channels, rail-to-rail output amplifiers, and a programmable reference. The device offers a settling time of 8 µs typical, ensuring fast response in dynamic applications. It also includes a power-on reset to zero-scale, ensuring safe startup conditions. The channel monitor function allows external monitoring of any channel without disturbing the output, which is valuable for system diagnostics. Technically, the AD5381 uses a segmented architecture with an internal precision reference, achieving excellent linearity and low noise. The device operates over a temperature range of -40°C to +105°C, making it suitable for industrial environments. The LQFP-100 package provides a compact footprint while allowing adequate thermal dissipation. The digital interface supports both parallel and serial modes, with the SER/PAR pin selecting the mode, and the SPI/I2C pin (Pin 97) enabling the serial interface when tied low. Typical applications include industrial process control (e.g., valve and actuator control), automatic test equipment (ATE) for precise voltage generation, and medical instrumentation such as patient monitoring systems. The AD5381's 40 channels allow it to drive multiple analog outputs simultaneously, reducing component count and improving system reliability. When designing with the AD5381, ensure proper decoupling of the AVDD and DVDD supplies with 10 µF and 0.1 µF capacitors placed close to the pins. The reference output should be buffered if external loads are connected. The MON_OUT pin can be used to monitor channel outputs, but care must be taken to avoid loading the monitored channel.

RFQ پەیوەندی
AD5412ACPZ - 12-Bit Current/Voltage Output DAC | Analog Devices
AD5412ACPZ

AD5412ACPZ - 12-Bit Current/Voltage Output DAC | Analog Devices

The AD5412ACPZ is a low-cost, precision, fully integrated 12-bit digital-to-analog converter (DAC) from Analog Devices that offers a programmable current source and programmable voltage output, designed to meet the requirements of industrial process control applications. It operates from a single 10.8V to 40V supply and provides a current output range of 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA, and a voltage output range of 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V. The device is available in a 40-lead LFCSP-VQ (6x6 mm) package, designated by the 'CP' suffix, and is specified for operation over the extended industrial temperature range of -40°C to +85°C. A digital-to-analog converter (DAC) is a device that converts digital binary data into an analog voltage or current signal. The AD5412 is a precision DAC with an integrated output amplifier and reference buffer, enabling direct interface to actuators, transmitters, and other industrial control elements. It belongs to the family of smart DACs that combine digital-to-analog conversion with programmable output ranges and diagnostic features, making it a key component in programmable logic controllers (PLCs), distributed control systems (DCS), and field transmitters. Key features of the AD5412ACPZ include a 12-bit resolution with monotonicity guaranteed, a flexible serial interface compatible with SPI, QSPI, and MICROWIRE protocols, and an on-chip precision reference (2.5V) with a temperature coefficient of 10 ppm/°C. The device also includes a HART (Highway Addressable Remote Transducer) compliant interface, allowing it to be used in smart transmitters that require superimposed digital communication on the analog current loop. The output is protected against short circuits and can drive capacitive loads up to 1 µF. Technically, the AD5412 uses a segmented architecture with a precision current-steering DAC core, followed by a programmable gain amplifier and output driver. The device includes a power-on reset circuit that ensures the output is at zero-scale or mid-scale on power-up, and a clear pin that resets the output to a defined state. The digital interface supports daisy-chaining for multiple devices on a single serial bus, and the device can be configured for either current or voltage output mode via the control register. Typical applications include industrial process control, PLC analog output modules, HART transmitters, and actuator control. The AD5412's ability to provide both current and voltage outputs with high accuracy and low drift makes it ideal for driving valves, positioners, and other field devices. Its HART compatibility enables seamless integration into existing 4-20 mA loop infrastructure. When designing with the AD5412ACPZ, ensure that the supply voltage is adequately decoupled with a 10 µF tantalum capacitor and a 0.1 µF ceramic capacitor placed close to the AVDD and DVDD pins. The reference output should be buffered if external loads are connected, and the output amplifier's stability should be verified with the expected capacitive load. For best performance, use a clean analog ground plane and separate digital and analog supply traces.

RFQ پەیوەندی
AD5412ACPZ-REEL7 - 12-Bit DAC with Current/Voltage Output | ADI
AD5412ACPZ-REEL7

AD5412ACPZ-REEL7 - 12-Bit DAC with Current/Voltage Output | ADI

The AD5412ACPZ-REEL7 is a low-cost, precision, fully integrated 12-bit digital-to-analog converter (DAC) from Analog Devices, offering a programmable current source and programmable voltage output. It is designed to meet the requirements of industrial process control applications, providing a single-channel output with serial input interface. The device operates from a 40-lead LFCSP-VQ (6x6 mm) package, ensuring compactness for space-constrained designs. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current signal. The AD5412 belongs to the family of precision DACs used in industrial automation, where accurate analog output is essential for controlling actuators, valves, and transmitters. It integrates a current source and voltage output capability, making it versatile for various control loops. Key features include 12-bit resolution, a programmable current output range (typically 4-20 mA) and voltage output range (0-5 V, 0-10 V, ±5 V, ±10 V), and a serial interface compatible with SPI. The device also includes a power-on reset, ensuring the output is at a known state on power-up. Its low power consumption and wide operating temperature range (-40°C to +125°C) make it suitable for harsh industrial environments. Technically, the AD5412 uses a resistor-string architecture with an output amplifier, providing monotonic performance and low glitch energy. It includes a precision internal reference (optional external reference) and a flexible digital interface that supports daisy-chaining. The device is fully specified over the industrial temperature range, ensuring reliable operation in demanding applications. Typical applications include industrial process control, programmable logic controllers (PLCs), actuator control, and transmitter calibration. The AD5412's ability to provide both current and voltage outputs makes it ideal for interfacing with various sensors and actuators in factory automation. When designing with the AD5412, ensure proper decoupling of the power supply and reference pins. The output amplifier requires a stable supply; consider using a low-noise LDO for analog rails. Also, the thermal pad should be soldered to a large copper area for effective heat dissipation.

RFQ پەیوەندی
AD5422ACPZ - 16-Bit Current/Voltage Output DAC | Analog Devices
AD5422ACPZ

AD5422ACPZ - 16-Bit Current/Voltage Output DAC | Analog Devices

The AD5422ACPZ is a single-channel, 16-bit digital-to-analog converter (DAC) from Analog Devices, designed for industrial process control applications. It provides a programmable current source and programmable voltage output, with HART connectivity capability. The device operates from a single 10.8V to 40V supply and is available in a 40-lead LFCSP-VQ (6x6 mm) package. It features a serial interface compatible with SPI, QSPI, and MICROWIRE protocols, and includes an on-chip reference and output amplifier. A DAC (digital-to-analog converter) is an electronic component that converts digital binary data into an analog voltage or current. The AD5422 is a precision DAC that integrates a current source and voltage output, making it a complete analog output stage for industrial control systems. It belongs to the family of smart DACs that combine digital-to-analog conversion with additional features like fault detection and HART communication. Key features include 16-bit resolution, a current output range of 4 mA to 20 mA (with additional ranges), a voltage output range of 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V, and a settling time of 10 µs. The device offers a total unadjusted error (TUE) of ±0.1% FSR, and includes a precision 5 ppm/°C internal reference. It also features a flexible serial interface, a power-on reset to zero-scale, and a fault alarm output. The AD5422 uses a segmented architecture with a precision resistor ladder and a high-speed output amplifier. It includes a programmable gain and offset, and supports HART signal modulation for smart transmitter applications. The device operates over a temperature range of -40°C to +85°C and is available in a lead-free, RoHS-compliant package. Typical applications include process control, PLC analog output modules, industrial automation, and HART network transmitters. The AD5422's high accuracy and flexibility make it suitable for driving actuators, valves, and other analog control elements. When designing with the AD5422, ensure proper decoupling of the AVDD and DVDD supplies, and use a clean analog ground plane. The device requires an external reference for best performance, and the output amplifier can drive capacitive loads up to 1000 pF.

RFQ پەیوەندی
AD5422ACPZ-REEL7 - 16-Bit V/I Out DAC | Analog Devices
AD5422ACPZ-REEL7

AD5422ACPZ-REEL7 - 16-Bit V/I Out DAC | Analog Devices

The AD5422ACPZ-REEL7 is a single-channel, 16-bit, serial input, current source and voltage output digital-to-analog converter (DAC) from Analog Devices, designed for industrial process control applications. It is housed in a 40-lead LFCSP-VQ (6x6 mm) package and operates over a wide supply range. The device integrates a programmable current source (0 mA to 24 mA) and a programmable voltage output (0 V to 5 V, 0 V to 10 V, ±5 V, ±10 V), making it highly versatile for actuator control, PLCs, and transmitter systems. A digital-to-analog converter (DAC) is an electronic circuit that converts digital binary data into an analog voltage or current. The AD5422 belongs to the family of precision DACs used in industrial control loops, where it translates digital setpoints from a microcontroller or FPGA into precise analog signals that drive valves, motors, or transmitters. It is a key component in the signal chain from digital control to physical actuation, bridging the digital and analog domains. Key features include 16-bit resolution, a flexible serial interface (SPI-compatible), and an on-chip precision reference. The device offers a monotonic output with low integral nonlinearity (INL) and differential nonlinearity (DNL), ensuring accurate analog representation. It also includes a HART (Highway Addressable Remote Transducer) connectivity mode, allowing the DAC to superimpose a frequency-shift keying (FSK) signal on the current loop for smart transmitter communication. The AD5422 uses a segmented architecture with a precision resistor ladder and a programmable gain amplifier to achieve its output ranges. It operates from a single 10.8 V to 40 V supply for the current loop and a separate digital supply (2.7 V to 5.5 V), enabling direct interface with low-voltage logic. The device includes a power-on reset, a clear pin, and a fault alarm output, enhancing system reliability. Typical applications include industrial process control, PLC analog output modules, HART transmitters, and actuator control. Its high accuracy and flexible output ranges make it suitable for both current-loop and voltage-output systems, reducing component count and board space. When designing with the AD5422, ensure proper decoupling of the AVDD and DVDD supplies, and consider the thermal performance of the LFCSP package when driving high current loads. The HART mode requires careful filtering to avoid signal distortion.

RFQ پەیوەندی
AD545KH - 16P Multiplying DAC | Analog Devices
AD545KH

AD545KH - 16P Multiplying DAC | Analog Devices

The Analog Devices AD545KH is a serial-interface multiplying digital-to-analog converter associated with the AD5450 device family and documented in 16-pin packaging. The family spans 8-, 10-, 12-, and 14-bit resolution options, with AD5450 identified as the 8-bit family member in the available product records. The AD545KH is therefore intended for compact systems that require a digital-to-analog conversion function without the larger footprint associated with higher-resolution converter families. A multiplying DAC is a digital-to-analog converter whose output current or voltage depends on both a digital input code and an external reference. Unlike a fixed-output DAC, this architecture allows an engineer to scale the converted result by changing the reference voltage or the gain-setting network. In the broader semiconductor hierarchy, the AD545KH belongs to the DAC family within ADC/DAC converters and, more broadly, within data-conversion and signal-processing integrated circuits. The AD5450 family is identified as a group of high-bandwidth multiplying DACs with a serial interface. Serial control reduces the number of parallel address and data pins needed on a PCB, making the converter suitable for compact instrumentation, control, and test systems. The available product documentation associates AD545KH with a 16-pin package, while the exact mechanical suffix, temperature range, electrical limits, and reference requirements must be confirmed from the manufacturer documentation before production release. Because the AD545KH is a multiplying converter, its reference accuracy, reference impedance, load, output buffer, and digital interface timing directly influence end-to-end accuracy. Designers should preserve the analog output topology used by the manufacturer application circuit and treat the external reference and feedback network as precision signal-chain elements. Decoupling, grounding, and return-current management are particularly important when converter outputs feed instrumentation amplifiers or measurement front ends. Typical uses include digital potentiometer emulation, programmable gain and offset systems, industrial process-control modules, automated test equipment, and compact laboratory instruments. In these applications, the multiplying architecture can let a digital control word select an output level while the external reference sets the full-scale scale. The family resolution range also provides a path to match conversion granularity to the precision required by the instrument. For implementation, verify serial clock polarity, data setup and hold timing, reset behavior, power-supply sequencing, and the complete pin assignment from the AD5450 manufacturer datasheet. Confirm the exact operating and storage temperature ratings, supply voltage, quiescent current, and reference current limits for AD545KH rather than assuming values from another AD5450 package suffix. Use the same package outline and exposed or non-exposed pad arrangement shown in the selected mechanical drawing. This product record combines package identification, structured technical context, practical converter-design guidance, and a focused family comparison. It also distinguishes genuine drop-in family options from broader functional alternatives, helping engineers make a PCB-compatible selection while completing the required electrical and lifecycle checks.

RFQ پەیوەندی
AD5535ABCZ - 32-Channel 14-Bit DAC, 50-200V | Analog Devices
AD5535ABCZ

AD5535ABCZ - 32-Channel 14-Bit DAC, 50-200V | Analog Devices

The AD5535ABCZ is a 32-channel, 14-bit digital-to-analog converter (DAC) with an integrated high-voltage output amplifier, manufactured by Analog Devices. It is housed in a 124-ball CSPBGA (15x15 mm) package and is specifically designed for optical microelectromechanical systems (MEMS) and other high-voltage precision control applications. The device features a full-scale output voltage programmable from 50 V to 200 V via the reference input, with a 700 μA drive capability per channel. It guarantees monotonicity and offers a 1.2 MHz channel update rate, making it suitable for high-speed, multi-channel systems. A DAC (digital-to-analog converter) is an electronic component that converts digital binary data into an analog voltage or current. The AD5535 is a high-voltage, multi-channel DAC, which falls under the category of data acquisition components, specifically within the broader family of digital-to-analog converters. These devices are essential in systems where precise analog control signals must be generated from digital processing, such as in industrial automation, test equipment, and MEMS control. The AD5535's high-voltage output capability distinguishes it from standard low-voltage DACs, enabling direct drive of actuators and other high-voltage loads. Key features of the AD5535ABCZ include its 32 independent channels, each with a 14-bit resolution, ensuring fine analog output steps. The integrated high-voltage amplifier eliminates the need for external amplification, simplifying design and reducing component count. The device also includes an integrated silicon diode for temperature monitoring, which is critical for thermal management in high-power applications. The serial interface is DSP- and microcontroller-compatible, and an asynchronous RESET facility allows for quick system initialization. From a technical perspective, the AD5535 utilizes a segmented architecture to achieve 14-bit accuracy while maintaining a small die size. The output amplifier is capable of sourcing 700 μA, which is sufficient for driving capacitive loads typical in MEMS applications. The reference input allows the full-scale output to be set between 50 V and 200 V, providing flexibility for various system requirements. The device operates over a temperature range of -10°C to +85°C, as indicated in the datasheet. Typical applications include optical MEMS systems, where precise high-voltage control of micro-mirrors or other actuators is required. It is also used in industrial process control, automated test equipment, and medical instrumentation that demands high-voltage analog outputs. The AD5535's high channel count and update rate make it ideal for multi-axis control systems. When designing with the AD5535, it is important to consider the power dissipation, as the high-voltage output stages can generate significant heat. Proper PCB layout with adequate thermal vias and a solid ground plane is recommended. Additionally, the reference input should be bypassed with a low-ESR capacitor to ensure stable operation.

RFQ پەیوەندی
AD5535ABCZ-REEL7 - 32-Channel 14-Bit DAC | Analog Devices
AD5535ABCZ-REEL7

AD5535ABCZ-REEL7 - 32-Channel 14-Bit DAC | Analog Devices

The AD5535ABCZ-REEL7 is a 32-channel, 14-bit digital-to-analog converter (DAC) with an integrated high-voltage output amplifier, designed for precision control in optical microelectromechanical systems (MEMS) and other high-voltage applications. Housed in a 124-ball CSPBGA (15x15 mm) package, this device offers a full-scale output voltage programmable from 50 V to 200 V via the reference input, with a 700 μA drive capability. The AD5535 guarantees monotonicity and includes an integrated silicon diode for temperature monitoring, making it suitable for demanding industrial and scientific instrumentation. A DAC is a device that converts digital signals into analog voltages or currents. The AD5535 is a specific type of DAC with multiple channels and high-voltage outputs, enabling precise control of actuators, piezoelectric devices, and other high-voltage loads. It belongs to the family of data converters, which are essential in bridging the digital and analog worlds in electronic systems. Key features include a 1.2 MHz channel update rate, an asynchronous RESET facility, and a DSP-/microcontroller-compatible serial interface. The device operates over a wide temperature range and is available in a compact CSPBGA package, facilitating high-density PCB layouts. The integrated high-voltage amplifier eliminates the need for external amplification stages, simplifying design and reducing component count. The AD5535 utilizes a segmented architecture to achieve 14-bit resolution with guaranteed monotonicity, ensuring accurate and predictable output across the full range. The high-voltage output stage is capable of driving capacitive loads typical of MEMS actuators, with a slew rate sufficient for real-time control applications. The integrated temperature diode provides a means for thermal monitoring, enabling system-level protection and calibration. Typical applications include optical MEMS mirror arrays, adaptive optics systems, precision voltage biasing, and automated test equipment. The device's ability to generate high voltages with high resolution makes it ideal for controlling piezoelectric actuators and electrostatic MEMS devices. When designing with the AD5535, it is important to consider the thermal dissipation of the high-voltage output stage and to provide adequate decoupling on the power supply pins. The reference input should be driven by a low-noise, stable voltage source to achieve optimal performance.

RFQ پەیوەندی
AD5545BRUZ - Dual 16-Bit Current-Output DAC | Analog Devices
AD5545BRUZ

AD5545BRUZ - Dual 16-Bit Current-Output DAC | Analog Devices

The Analog Devices AD5545BRUZ is a dual, 16-bit, current-output, serial-input digital-to-analog converter (DAC) housed in a 16-pin TSSOP (RU-16) package. It operates from a single 4.5V to 5.5V supply and delivers ±1 LSB DNL monotonicity with ±1 LSB INL linearity. The full-scale output current is 2 mA ±20%, set by an external reference voltage, and an internal feedback resistor (RFB) simplifies I-to-V conversion when combined with an external op amp such as the AD8038. A multiplying DAC is a converter whose output is the product of a digital input code and an analog reference voltage, enabling four-quadrant operation when bipolar signals are applied. The AD5545 belongs to the current-output multiplying DAC category, which sits within the broader hierarchy of digital-to-analog converters -> data converters -> mixed-signal ICs -> semiconductor devices. Current-output architectures are favored where the reference must vary with a signal (such as in gain control, attenuators, or automatic test equipment) rather than being a fixed precision voltage. Key features include a 2Q multiplying reference input, 0.5 µs full-scale settling time, and a bipolar output swing of up to ±15 V when used with an external high-voltage op amp. The serial interface is SPI/QSPI/MICROWIRE-compatible and supports high-speed write cycles. The dual-channel integration makes the device suitable for complex waveform generation, I/Q signal synthesis, and simultaneous update applications. Typical applications include programmable gain/attenuation stages, digital waveform synthesis, ATE (automatic test equipment) calibration, industrial process control, and precision instrumentation. The wide reference input bandwidth allows the AD5545 to function as a digitally controlled variable attenuator when paired with a high-speed current-to-voltage op amp. When designing with this DAC, ensure the external I-to-V op amp has sufficient bandwidth and slew rate to settle within the 0.5 µs specification. Decouple VDD with a 1 µF tantalum plus 0.1 µF ceramic combination placed close to the supply pin, and route the analog ground return directly to the load to avoid ground-loop errors. This page synthesizes distributor pricing, parametric data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
AD5545BRUZ-REEL7 - Dual 16-Bit I-Out DAC | Analog Devices
AD5545BRUZ-REEL7

AD5545BRUZ-REEL7 - Dual 16-Bit I-Out DAC | Analog Devices

The Analog Devices AD5545BRUZ-REEL7 is a dual, 16-bit, current-output, serial-input digital-to-analog converter (DAC) housed in a 16-pin TSSOP package. It operates from a single 5 V supply with bipolar output swing capability up to +/-15 V, requires an external reference to set the full-scale output current, and provides 2 mA full-scale current with +/-20% accuracy relative to VREF. Each channel settles to within +/-1 LSB in 0.5 us, supporting high-precision signal generation. A multiplying DAC is a converter whose output is the product of a digital code and an analog reference input. This category sits within the broader hierarchy of digital-to-analog converters -> data converters -> mixed-signal ICs -> semiconductors. Multiplying DACs are typically implemented with R-2R ladder networks because the architecture allows the reference input to vary (including AC) without disturbing monotonicity, and is therefore preferred over resistor-string designs when 4-quadrant multiplication, bipolar operation, or wide reference range is required. Key features of the AD5545 include +/-1 LSB DNL (monotonic), +/-1 LSB INL, a 3-wire serial interface (SDI, CLK, CS) compatible with microcontrollers, and an LDAC function that allows simultaneous update of both DAC outputs. The internal reset logic supports power-on preset and dynamic reset at either zero or midscale, configurable via the MSB pin. Input reference voltages are accepted in the range of -12 V to +12 V with a constant nominal input resistance of 5 kohm +/-30%, enabling 4-quadrant multiplication. Internally the AD5545/AD5555 use a matched thin-film R-2R ladder network per channel with CMOS switches steered by the input register, a precision bandgap-based reference input conditioning network, and an LDAC-triggered double-buffered latch architecture. This topology delivers low gain error and excellent DC accuracy while keeping digital feedthrough low. AC reference inputs are also accommodated, making the part suitable for waveform generation and audio gain control. Typical applications include precision instrumentation, automatic test equipment (ATE) level setting, digitally controlled calibration, waveform synthesis, audio gain control, and industrial process control. The wide bipolar output swing and multiplying capability make it especially attractive for four-quadrant signal chains and high-accuracy analog output modules in PLC and data-acquisition systems. When designing with the AD5545, choose a low-offset, low-noise op-amp such as the AD8038 or AD8065 for the I-to-V conversion stage, and lay out the TSSOP footprint with analog/digital ground partitioning. Reference decoupling with 0.1 uF close to the REF pin is recommended, and the LDAC line should be tied high for simultaneous update operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving the engineer a faster path from selection to qualified PCB.

RFQ پەیوەندی
AD561SD/883B - 10-Bit Monolithic DAC | Analog Devices
AD561SD/883B

AD561SD/883B - 10-Bit Monolithic DAC | Analog Devices

The AD561SD/883B is a 10-bit digital-to-analog converter (DAC) from Analog Devices, featuring a high-stability voltage reference integrated on a single monolithic chip. It is packaged in a 16-pin hermetically sealed ceramic DIP (CDIP) and is designed for military temperature range operation from -55°C to +125°C. The device uses ten precision high-speed current-steering switches, a control amplifier, and a laser-trimmed thin-film SiCr resistor network to produce a fast, accurate analog output current. A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD561SD/883B is a current-output DAC, meaning it outputs a current proportional to the digital input, which can be converted to a voltage using an external op-amp. DACs are fundamental building blocks in data acquisition systems, where they generate analog signals for control, waveform generation, and audio applications. The AD561SD/883B belongs to the family of precision DACs, offering 10-bit resolution and a built-in reference, simplifying system design. Key features of the AD561SD/883B include its 10-bit resolution, monolithic construction with integrated voltage reference, and military-grade screening. The device operates over the full military temperature range of -55°C to +125°C, making it suitable for aerospace and defense applications. The hermetically sealed ceramic DIP package ensures reliability in harsh environments. The laser-trimmed thin-film resistor network provides excellent linearity and accuracy, with a typical settling time of [DATA_NEEDED: settling time] and a gain error of [DATA_NEEDED: gain error]. The AD561SD/883B is designed for high-performance applications where precision and reliability are critical. Its current output can be easily converted to a voltage using an external operational amplifier, and the integrated reference eliminates the need for an external reference source. The device is pin-compatible with other members of the AD561 family, allowing for easy upgrades or replacements. The military-grade screening ensures compliance with stringent quality standards, making it ideal for mission-critical systems. Typical applications include military avionics, radar systems, industrial process control, and test and measurement equipment. The wide operating temperature range and hermetically sealed package make it suitable for extreme environments. When designing with the AD561SD/883B, ensure proper decoupling on the power supply pins and consider the output current-to-voltage conversion circuit to achieve optimal performance.

RFQ پەیوەندی