بەرهەمەکان (970+)

TS555IPT - 2.7 MHz CMOS Timer, 8-TSSOP | STMicroelectronics
TS555IPT

TS555IPT - 2.7 MHz CMOS Timer, 8-TSSOP | STMicroelectronics

The STMicroelectronics TS555IPT is a single CMOS programmable timer and oscillator rated for a maximum astable frequency of 2.7 MHz and supplied in an 8-pin TSSOP package. Its principal operating specifications include a typical supply current of 110 µA at VCC = 5 V, a supply-voltage range up to 18 V, and operation over a temperature range of -40 °C to 125 °C. The device provides the standard 555 trigger, threshold, output, discharge, reset, and control functions needed to generate accurate time delays or periodic waveforms. A 555 timer is a programmable timer IC that can operate as a monostable one-shot or an astable oscillator. Within the broader semiconductor hierarchy, the TS555 belongs to the clock and timing IC category and can also function as a voltage comparator when configured conventionally. Its CMOS implementation reduces consumption compared with the classic bipolar NE555 while retaining pin-to-pin and functional compatibility with established 555 timer circuits. The TS555IPT combines low power consumption, high maximum operating frequency, and reduced supply-current spikes during output transitions. Its CMOS implementation is useful in battery-powered equipment, compact control systems, signal-processing modules, and industrial electronics where supply efficiency and surface-mount packaging are important. The 8-TSSOP format also supports automated board assembly and reduces the footprint compared with larger through-hole timer packages. Timing accuracy remains available in both monostable and astable operating modes. In monostable operation, an external trigger starts one timed output pulse whose duration is determined by resistance and capacitance. In astable operation, external timing components continuously charge and discharge an internal timing node to produce a continuous output waveform. The maximum astable frequency of 2.7 MHz makes the device suitable for substantially faster timing applications than conventional low-frequency NE555 implementations. Typical uses include LED flashers, pulse generators, debounce circuits, industrial control timing, appliance interfaces, and compact sensor or communications modules. Because the TS555IPT supports both positive and negative trigger inputs, it can also implement Schmitt-trigger-style signal conditioning. Board designers should account for the TSSOP lead pitch and place timing, control, and bypass capacitors close to their associated pins. When designing the circuit, verify trigger and reset pulse widths against the operating conditions in the manufacturer datasheet, and ensure the discharge-device voltage and current remain within their rated limits. A local supply bypass capacitor is recommended near the VCC and ground pins to suppress switching transients, especially in high-frequency astable operation. This product overview combines the TS555IPT electrical characteristics, package details, functional behavior, cross-reference findings, and practical design guidance into one engineering-focused reference for timer selection, PCB implementation, and replacement evaluation.

RFQ پەیوەندی
TS556CD - Dual CMOS Timer, 2.7MHz, 14-SOIC | STMicroelectronics
TS556CD

TS556CD - Dual CMOS Timer, 2.7MHz, 14-SOIC | STMicroelectronics

The STMicroelectronics TS556CD is a low-power dual CMOS 555-type timer and oscillator with a maximum frequency of 2.7 MHz, a 2 V to 16 V supply range, and a 14-pin SOIC package. The device combines two independent timer sections, low typical supply current, and pin-to-pin and functional compatibility with the bipolar NE556, making it suitable for precision timing, pulse generation, delay, and oscillator circuits. A 555-type timer is an analog timing integrated circuit that compares an externally controlled voltage with threshold and trigger levels. In monostable mode, it produces one timed output pulse; in astable mode, it oscillates continuously when configured with external resistors and capacitors. The TS556CD uses CMOS circuitry to reduce power consumption while retaining the familiar dual-timer architecture. Key verified features include a maximum astable frequency of 2.7 MHz, low-power operation, and supply current listed in the source data at approximately 130 µA in one distributor summary, while the manufacturer-family description specifies 220 µA typical at VCC = 5 V for TS556. The discrepancy reflects different device variants or source summaries; application designs should verify the exact datasheet value for the ordered part. The 14-SOIC package is suitable for conventional PCB assembly and through-hole-compatible external connections. The TS556CD is useful in pulse-width generation, delay circuits, waveform generation, LED flashing, industrial control timing, low-power signal generation, and embedded control systems. Its dual sections allow two timers in one package when board area is constrained. Because timing accuracy depends on resistor tolerances, capacitor stability, supply variation, and output loading, those components should be selected for the target frequency and temperature range. The principal design consideration is confirming output drive, supply voltage, timing limits, and pin-level compatibility with the surrounding circuit. The manufacturer describes the family as functionally and pin-to-pin compatible with the bipolar NE556, but load conditions and supply-specific timing behavior still require review before substitution. The TS556CD is listed as obsolete by one distributor source, so procurement should confirm lifecycle status and availability before committing to a production design. This page combines the verified TS556CD specifications, sourcing information, lifecycle observations, and application guidance to support design triage. It also highlights why a same-package timer replacement must be checked for frequency, voltage, timing, and output-load compatibility rather than selected by footprint alone.

RFQ پەیوەندی
TS556CDT - Dual 2.7MHz Timer IC | STMicroelectronics
TS556CDT

TS556CDT - Dual 2.7MHz Timer IC | STMicroelectronics

STMicroelectronics TS556CDT is a dual CMOS 555-type timer and oscillator with two independent timing channels, a maximum astable frequency of 2.7 MHz, and a 2 V to 16 V supply-voltage range. The device is packaged in a 14-pin SOIC and is pin-to-pin and functionally compatible with the bipolar NE556 timer family. Each channel can operate as a monostable pulse generator or an astable oscillator, making the TS556CDT suitable for timing, delay, pulse generation, modulation, and simple clock-generation circuits. A 555-type timer is a clock-and-timing integrated circuit that compares an externally controlled timing voltage with a reference threshold and switches an output when the voltage crosses that threshold. In the monostable configuration, one external resistor and capacitor determine a single output pulse. In the astable configuration, two resistors and a capacitor establish continuous oscillation. The TS556 family belongs to the broader semiconductor hierarchy of clock and timing ICs, timer ICs, programmable timers, and oscillators. The TS556CDT provides a maximum astable operating frequency of 2.7 MHz and operates from 2 V to 16 V. Its low power consumption is a notable characteristic: the manufacturer datasheet lists a typical supply current of 220 µA at 5 V and 180 µA at 3 V. One distributor technical listing reports 130 µA supply current, demonstrating that the operating-current figure can vary with supply voltage and test conditions. The commercial-temperature TS556CDT is specified for an operating range of 0 °C to 70 °C. Using CMOS construction allows the TS556CDT to provide the functional behavior of the classic 555 timer in a low-power, dual-channel implementation. Both timer sections can be used independently, which reduces component count when a board requires two related timing functions. Equivalent internal oscillators can produce clocks for digital systems, while independently configured channels can create delayed pulses, retriggerable one-shots, window timers, or simple tone-generating circuits. Typical applications include industrial control and instrumentation, digital delay networks, pulse-generation circuits, low-power sensor interfaces, tone generation, debounce and delay networks, embedded control systems, and general-purpose clock-generation modules. The 14-pin SOIC package is suitable for conventional surface-mount PCB assembly and allows straightforward hand soldering during prototype development. When using the TS556CDT, calculate the timing resistor and capacitor tolerances because both directly determine pulse width and oscillation frequency. Keep the timing node away from noisy high-current traces, use a bypass capacitor close to the supply pins, and verify the discharge-transistor peak current against the chosen timing resistor. For battery-powered equipment, compare both operating current and the leakage contribution of the timing capacitors against the complete power budget. This page combines the core electrical limits, operating-temperature range, package details, pin-compatibility information, application guidance, and selection considerations needed to evaluate the TS556CDT. It also identifies three closely related TS556 family ordering variants and clearly distinguishes their package and temperature-grade verification needs for drop-in replacement planning.

RFQ پەیوەندی
TS556CN - Dual 2.7MHz CMOS Timer | STMicroelectronics
TS556CN

TS556CN - Dual 2.7MHz CMOS Timer | STMicroelectronics

The STMicroelectronics TS556CN is a dual low-power CMOS timer with two independent 555-compatible timing sections, a maximum astable frequency of 2.7 MHz, and a 14-DIP package. Its verified supply-voltage range is 2 V to 16 V, while one secondary result describes the family operating to 18 V; the exact maximum for this orderable device must therefore be confirmed from its datasheet before use. The TS556CN provides 180 µA typical supply current at 3 V and is designed for accurate monostable and astable operation. A CMOS timer is a programmable time-delay and oscillator integrated circuit. It belongs to the timer/oscillator category, within clock and timing ICs and broader semiconductor devices. Each timer section uses external resistors and capacitors to set delay or oscillation behavior, making this device useful where conventional 555-type timing, pulse generation, delay, and repetitive switching are required without a microcontroller. Key verified attributes include dual-timer construction, operation from 2 V to 16 V, a high maximum astable frequency of 2.7 MHz, and pin-to-pin and functional compatibility with bipolar NE556 devices. Reduced supply-current spikes during output transitions can permit lower decoupling capacitance than a conventional bipolar implementation. The stated 180 µA typical current at 3 V supports battery-conscious designs, although load and switching conditions must be checked against the datasheet. The TS556CN uses CMOS circuitry to combine low quiescent consumption with higher timer frequency than the bipolar NE556 comparison cited in the search data. That comparison reports 2.7 MHz maximum frequency for TS556 versus 0.1 MHz for NE556. However, actual operating frequency depends on timing resistors, capacitors, propagation delays, output loading, and supply voltage, so high-frequency layouts require short traces and careful grounding. Typical uses include LED and lamp flashers, pulse generators, delay stages, debounce or retriggerable timing networks, simple oscillators, industrial control timers, and low-power instrumentation. The 14-DIP through-hole package favors prototypes, educational designs, repairable assemblies, and human-built electronics where a socketed or perforated-board implementation is practical. Design with the two timer sections independently unless datasheet pin behavior explicitly permits shared connections. Place timing components close to their associated pins, bypass the supply near the device, and account for output-current limits and threshold tolerances. Because the web evidence provides conflicting voltage-range wording, use the 2 V to 16 V range for this listing and verify absolute maximum and operating limits before releasing production hardware. This page combines verified distributor and datasheet findings, package-aware replacement analysis, and practical timer-circuit guidance. It also distinguishes documented TS556CN data from specifications that were not supplied, avoiding unsupported claims about pricing, lifecycle, compliance, or exact pin assignments.

RFQ پەیوەندی
TS556ID - Dual 2.7MHz CMOS Timer | STMicroelectronics
TS556ID

TS556ID - Dual 2.7MHz CMOS Timer | STMicroelectronics

The STMicroelectronics TS556ID is a dual CMOS 555-type timer and oscillator with two independent timing sections, operation from 2 V to 16 V, a maximum astable frequency of 2.7 MHz, and typical supply current of 220 µA at 5 V. It is supplied in a 14-pin SOIC package. The TS556ID combines 555 timer compatibility with CMOS power efficiency and higher timing frequency than the traditional bipolar NE556. A 555-type timer is a programmable clock and timing semiconductor that can operate as a monostable one-shot or astable oscillator. In system hierarchy, the TS556ID belongs to clock and timing ICs, timer ICs, oscillators, and semiconductors. Each internal timer provides resistive and capacitive timing inputs, trigger and reset controls, and an output stage. Two independent sections allow one circuit to generate two events, delays, tones, or periodic waveforms. The verified data identifies the TS556 as a pin-to-pin and functionally compatible bipolar NE556 design, while reducing typical supply current to 220 µA at a 5 V supply. Another source lists 180 µA typical at 3 V. Its 2.7 MHz maximum astable frequency allows shorter timing periods and higher-frequency waveform generation than a 0.1 MHz NE556, subject to the datasheet's timing limits, component tolerances, and output-drive conditions. The TS556ID supports monostable and astable operating modes. In monostable service, an external trigger produces a timed output pulse whose duration is determined primarily by external resistance and capacitance. In astable service, external timing components charge and discharge an internal node, producing continuous oscillation. Engineers should calculate the timing values from the manufacturer datasheet, include realistic resistor and capacitor tolerances, and verify output rise and fall behavior in the intended load. Typical uses include low-power pulse generation, delayed actuator triggering, LED and indicator flashing, audible tones, small signal-clock generation, industrial control timing, and embedded system timing support. The dual architecture is especially useful when two related but nonsynchronous events are needed. Compared with a NE556, the principal benefits are lower typical consumption and a substantially higher maximum astable frequency; NE556 compatibility does not mean every electrical limit is identical. Design with the 2 V to 16 V supply range in mind, especially the output behavior at low supply voltage. Keep the reset and trigger paths free of unwanted noise, select timing-component tolerances for the required frequency accuracy, and provide the bypass and output-loading conditions required by the datasheet. Because timing accuracy depends on real component values and parasitics, breadboard validation is advisable for high-frequency or precision intervals. This page combines verified manufacturer and distributor information, practical timing guidance, and a conservative assessment of drop-in replacements. It distinguishes documented electrical facts from parameters that require datasheet confirmation, helping engineers locate the TS556ID datasheet, evaluate purchasing options, and decide whether a same-package substitute is suitable for an existing PCB.

RFQ پەیوەندی
TS556IDT - Dual CMOS Timer, 2.7MHz, SOIC-14 | STMicroelectronics
TS556IDT

TS556IDT - Dual CMOS Timer, 2.7MHz, SOIC-14 | STMicroelectronics

The STMicroelectronics TS556IDT is a dual CMOS 555-type timer and oscillator designed for low-power timing, monostable, astable, and pulse-generation circuits. It provides a maximum astable operating frequency of 2.7 MHz, operates from a 2 V to 16 V supply, and is packaged in a 14-pin SOIC. The device is pin-to-pin and functionally compatible with bipolar NE556 timer families, while its CMOS implementation reduces supply-current demand and improves switching behavior in precision timing applications. A 555 timer is a programmable time-delay and oscillator building block within the broader clock and timing IC category. Each TS556 timer section contains a voltage reference, comparators, a flip-flop, discharge transistor, and an output stage. The timing interval is set by external resistors and capacitors connected to the RC timing pins. Typical uses include delayed switching, pulse stretching, debounce circuits, lamp flashers, simple oscillators, and frequency dividers. Key characteristics include a 2.7 MHz maximum astable frequency, a wide 2 V to 16 V operating supply range, and low power consumption. The manufacturer identifies the TS556 as a dual CMOS timer with typical supply current of 220 uA at VCC = 5 V, compared with approximately 6 mA for the NE556(a) bipolar family. The available technical description also identifies the TS556 as pin-to-pin and functionally compatible with bipolar NE556(a) devices. The dual configuration allows two independent timing channels in one package, reducing component count and board area when an application needs simultaneous or complementary timing functions. The TS556IDT is suitable for industrial control, sensor interfaces, pulse generation, low-power instrumentation, embedded timing modules, and general-purpose oscillator circuits. Its SOIC-14 package supports conventional surface-mount assembly while retaining the familiar dual 555 interface. When designing a replacement board, use the manufacturer pin-description table to preserve trigger, threshold, control-voltage, discharge, and output connections. Confirm the intended mode of operation and external RC network before changing timing components. The 2.7 MHz figure is a maximum astable-frequency capability, and actual operating frequency depends on resistor and capacitor values, load conditions, supply voltage, and timing tolerances. For systems requiring exact timing accuracy, evaluate the minimum and maximum RC values and the propagation behavior of the output stage over the intended voltage and temperature ranges. This page combines the TS556IDT datasheet information, package details, timing-use context, and practical replacement guidance to support faster component selection and PCB-level integration.

RFQ پەیوەندی
TS556IN - Dual 2.7 MHz CMOS Timer | STMicroelectronics
TS556IN

TS556IN - Dual 2.7 MHz CMOS Timer | STMicroelectronics

The STMicroelectronics TS556IN is a low-power dual CMOS 555-type timer and oscillator with a maximum astable operating frequency of 2.7 MHz, supplied from 2 V to 16 V and packaged in a 14-pin DIP. Each half of the device can operate as a monostable timer, astable oscillator, or frequency divider. The dual timer uses CMOS construction to reduce supply consumption, with one verified source quoting a typical supply current of 100 µA at VCC = 5 V. The TS556 family is also described as pin-to-pin and functionally compatible with the bipolar NE555, which simplifies replacement of legacy timer circuits. A programmable timer is an oscillator-and-triggering circuit that produces a timed output pulse. A 555-type timer belongs to the clock and timing IC hierarchy: timer and oscillator > programmable timer > clock and timing integrated circuit > semiconductor. In monostable mode, one trigger produces a pulse of a defined duration. In astable mode, the two internal comparators and flip-flop repeatedly charge and discharge an external timing capacitor, creating continuous pulses. Two independent timer sections can therefore control separate events or generate related timing sequences. The TS556IN combines several useful characteristics for timer applications. Its maximum astable frequency is 2.7 MHz, allowing short timing periods when supported by suitable external resistors and capacitors. The verified operating-voltage information identifies a 2 V minimum supply and a 16 V maximum supply for TS556IN. Additional family-level features include high output-current capability, reduced supply-current spikes during output transitions, and compatibility with bipolar NE555 implementations. The reported operating-temperature range is -40 °C to +125 °C, supporting industrial-temperature designs. Internally, the TS556 is a CMOS implementation of the classic dual-timer architecture. Each section uses voltage thresholds, a discharge transistor, and an output stage to compare an external capacitor voltage with control levels derived from the supply voltage. CMOS operation is principally valuable for low supply consumption and reduced switching activity compared with the bipolar NE555. Designers must still account for timing-component tolerance, output rise and fall behavior, and the maximum astable frequency when setting high-frequency operating conditions. Typical uses include pulse generation, delay and retrigger circuits, periodic switching, lamp and motor control, low-frequency oscillators, and two-channel industrial timing systems. TS556IN is particularly appropriate where a through-hole 14-DIP footprint and dual timer are required rather than a surface-mount package. In an astable oscillator, external R-A, R-B, and capacitor C values determine the repetition rate and duty cycle; the 2.7 MHz maximum frequency is an important upper-bound constraint for high-speed timing designs. The primary design consideration is preserving the 555-compatible timing architecture while allowing adequate tolerance and ESR for the selected capacitor. Place timing components close to the device, keep discharge-current paths compact, and avoid excessive loading of the threshold and trigger nodes. Because the part is supplied in a through-hole DIP package, board spacing, connector accessibility, and thermal performance should be checked before using it in new compact designs. This product page consolidates verified distributor specifications, manufacturer-family information, application guidance, packaging details, and available replacement references. It distinguishes directly documented TS556IN characteristics from family-level or distributor-supplied information and explicitly identifies data that remains unavailable, allowing engineers to make sourcing and design decisions without relying on unverified assumptions.

RFQ پەیوەندی
VSC7223XJV - 16 Gbps Quad Retimer/Redriver | Microchip
VSC7223XJV

VSC7223XJV - 16 Gbps Quad Retimer/Redriver | Microchip

Microchip Technology VSC7223XJV is a four-channel multirate retimer/redriver that supports data rates up to 16 Gbps in a 48-QFN package measuring 5 mm by 9 mm. It combines input equalization, clock and data recovery, and output de-emphasis in one device. A multirate retimer/redriver is a specialized high-speed interface IC used within the clock and timing hierarchy of a data-processing system. It receives a degraded high-speed signal, recovers its timing and data, applies channel compensation, and then redrives the signal to improve system margin across cables, printed circuit board traces, backplanes, and other copper media. The device provides four independent high-speed channels and supports operation to 16 Gbps. Its input equalization compensates for frequency-dependent loss in FR-4 printed circuit board traces and copper cabling. Clock and data recovery removes timing distortion, while output de-emphasis helps control signal integrity in lossy channels and improve interoperability with downstream receivers. According to the manufacturer information, VSC7223 is intended to increase system margin and extend media-driving distance. The documented examples include equalization of more than 65 inches of FR-4 at 10 Gbps and more than 15 meters of 24 AWG SFP+ direct-attach copper cable at 10 Gbps. These figures describe the specified application environment and should be validated in the final system layout, connector, and enclosure. Typical uses include 10G and 16G Ethernet copper links, data-center equipment, telecommunications infrastructure, server connectivity, test equipment, and other high-speed backplane or cable interfaces. The industrial temperature grade and no-lead 48-terminal package support applications where robust environmental performance and compact surface-mount assembly are required. When designing around VSC7223XJV, preserve the controlled-impedance topology and reference-plane continuity of high-speed differential pairs. Place bypass capacitors close to supply pins, keep return paths continuous, and verify channel loss, insertion loss, crosstalk, and connector behavior with channel simulation and eye measurements before production. This product record combines verified manufacturer and distributor information with practical engineering guidance, package and interface details, sourcing data, and an explicit assessment of available drop-in replacements. No compatible substitute is listed unless its package, pin compatibility, and electrical proximity can be independently verified.

RFQ پەیوەندی
VSC8115XYA-T - 622 Mbps Clock Recovery Unit | Microchip
VSC8115XYA-T

VSC8115XYA-T - 622 Mbps Clock Recovery Unit | Microchip

The Microchip Technology VSC8115XYA-T is a 622 Mbps clock recovery unit (CRU) for SONET/SDH and dense wavelength division multiplexing applications. It provides one recovered-clock output in a 20-pin TSSOP package and is supplied in lead-free tape-and-reel packaging. The device belongs to the application-specific clock and timing IC family, where clock and data recovery circuits restore timing information from transmitted data streams. A clock recovery unit is a specialized timing IC used in high-speed digital communication systems. Its role within the optical-transceiver hierarchy is to extract or recover a usable clock from a serial data stream when the transmitted signal no longer carries a separate clock conductor. Clock recovery units support communication infrastructure by helping downstream digital logic operate from a timing reference synchronized to the incoming data. The VSC8115XYA-T is identified as a single-channel, 622 Mbps device with one output. Its principal documented characteristics are its 622 Mbps operating rate, one recovered output, 20-pin TSSOP construction, and lead-free tape-and-reel delivery format. These details position it for SONET/SDH, DWDM, and related telecom signal-conditioning designs where a dedicated recovery function is required. Clock recovery differs from ordinary clock generation because the IC must derive stable timing from a data stream that may have accumulated timing variation. In a practical optical communication path, a recovered clock can feed parallelizing logic, a descrambler, a retimer, or another digital processing block. Correct implementation depends on the interface requirements of the surrounding equipment, including data rate, reference-clock arrangement, logic level, and jitter tolerance. Typical uses include 622 Mbps line-card interfaces, SONET/SDH transport equipment, DWDM optical networking, telecommunications test equipment, and clock-recovery sections of optical transceivers. The 20-pin TSSOP package also allows reuse of board layouts intended for compatible 20-pin clock-and-timing devices. The VSC8115XYA-06-T is a closely related family member listed at the same 622 Mbps operating point. Before laying out a replacement board, verify the complete pin arrangement, electrical limits, reference requirements, and timing behavior in the Microchip manufacturer datasheet. A mechanically similar 20-pin package alone does not establish signal compatibility, especially for a clock-recovery interface whose internal architecture and pin functions must match the original design. This product page combines the verified 622 Mbps and 20-pin TSSOP characteristics with family-level alternatives, application guidance, and design checks that support faster component selection and board-level planning.

RFQ پەیوەندی
VSC8228XRC-01 - Dual 4.25G Retimer | Microchip
VSC8228XRC-01

VSC8228XRC-01 - Dual 4.25G Retimer | Microchip

The Microchip Technology VSC8228XRC-01 is a dual-port, dual-output clock and data recovery retimer supporting serial link rates from 125 Mbps to 4.25 Gbps in a 64-pin TQFP package measuring 10 mm by 10 mm. The device provides two FibreTimer clock recovery units for bidirectional signal conditioning in system interconnect and serial backplane applications. A clock and data recovery IC, or CDR, extracts timing information from a corrupted or degraded serial stream and reconstructs a clean data and clock output. Within the hierarchy of integrated circuits, a CDR belongs to the Clock & Timing and Interface IC families, supporting reliable data transfer when transmitted signals experience attenuation, jitter, or noise. The VSC8228 is designed for Fibre Channel, Gigabit Ethernet, SONET/SDH, and InfiniBand system interconnect. The primary features of the VSC8228XRC-01 include two retiming ports, support for data rates up to 4.25 Gbps, operation from a minimum rate of 125 Mbps, and two independent clock recovery units. Its dual-channel architecture allows a single device to condition two serial links, reducing component count and simplifying board-level clock distribution. The 64-TQFP surface-mount package also supports compact backplane and communications equipment layouts. Technically, the FibreTimer architecture separates clock recovery from ordinary signal buffering and performs bidirectional signal conditioning. This is particularly useful when loss, skew, or accumulated jitter would compromise a high-speed point-to-point link. A single reference clock can be used for acquisition, allowing the two recovered channels to share a coherent timing reference. Confirm the required reference-clock topology, operating mode, and channel configuration against the Microchip VSC8228 documentation before laying out the PCB. Typical uses include Fibre Channel links, Gigabit Ethernet backplanes, SONET/SDH equipment, and InfiniBand interconnects. The device is also appropriate for proprietary serial backplanes operating at or below 4.25 Gbps where recovered clock and data outputs are required at both ends of a link. PCB implementation should prioritize short, controlled-impedance traces, solid reference planes, and symmetric routing between the transmit and receive channels. Place clock-generation and decoupling networks close to their associated device pins, and follow the manufacturer’s recommended termination and layout guidance to minimize signal-integrity degradation. This page combines the manufacturer’s device description with application-focused engineering guidance, package information, sourcing questions, and selection criteria that help engineers determine whether the VSC8228XRC-01 fits a high-speed recovery or retiming requirement.

RFQ پەیوەندی
VSC8247YJB-01 - 10G Quad CDR with EDC | Microchip
VSC8247YJB-01

VSC8247YJB-01 - 10G Quad CDR with EDC | Microchip

The Microchip Technology VSC8247YJB-01 is a quad-channel clock and data recovery IC with adaptive electronic dispersion compensation (EDC), four outputs, and a 144-FCBGA package measuring 13 mm by 13 mm. It operates from 8.5 Gbps to 11.3 Gbps per channel and supports 10G Ethernet, SONET, 8G Fibre Channel, and 10G QDR InfiniBand protocols. A clock and data recovery IC is a high-speed interface component that reconstructs a usable clock from a received serial data stream. Where the incoming signal has experienced timing jitter or channel dispersion, the CDR detects timing deviation and adjusts its recovered clock. EDC adds adaptive equalization to compensate for signal degradation, making the VSC8247YJB-01 suitable for demanding serial links rather than ordinary low-speed interface recovery. The primary features of the device are four independent recovery channels, four clock outputs, an 8.5 Gbps to 11.3 Gbps operating range, and integrated adaptive EDC. These characteristics allow one device to serve multiple high-speed lanes in a networking or storage system. The four-output architecture can reduce the number of discrete recovery components required when a board must recover several related signals. Technically, the VSC8247YJB-01 combines clock and data recovery with adaptive dispersion compensation in a single 144-FCBGA package. This integration places timing recovery and channel-loss mitigation beside the physical-layer receive path. The listed protocol support gives designers a practical framework for selecting operating modes, although configuration, reference-clock, media, and electrical requirements must be confirmed against the manufacturer documentation before a board is released. Typical applications include 10G Ethernet ports, SONET/SDH equipment, 8G Fibre Channel links, and 10G QDR InfiniBand interfaces. It can also support multi-lane backplanes, optical-module receive paths, network-interface controllers, and high-speed test equipment where deterministic clock recovery and channel equalization are important. A critical design consideration is that recovery performance depends on the complete channel, including transmitter characteristics, trace losses, connectors, clocking, and receive equalization. PCB layout, power distribution, reference decoupling, and input signal integrity must therefore be developed as part of the high-speed design rather than added after schematic completion. This page organizes the device protocol, package, speed, and channel information into an engineering-focused guide, adds application analysis, and clearly identifies the electrical, pinout, lifecycle, and drop-in replacement details that still require manufacturer confirmation.

RFQ پەیوەندی
VSC8247YJB-02 - 8.5-11.3 Gbps Quad CDR | Microchip
VSC8247YJB-02

VSC8247YJB-02 - 8.5-11.3 Gbps Quad CDR | Microchip

The Microchip Technology VSC8247YJB-02 is a four-channel clock and data recovery (CDR) and retimer IC for high-speed serial links operating from 8.5 Gbps to 11.3 Gbps. It provides four outputs and is packaged in a 144-FCBGA measuring 13 mm by 13 mm. A clock and data recovery IC is a timing and signal-integrity component that extracts or reconstructs a usable clock from a high-speed serial data stream. It belongs to the clock and timing IC hierarchy within broader interface and semiconductor systems. By recovering timing information and retiming data, a CDR can reduce accumulated jitter and help a receiver interpret a serial signal reliably. The VSC8247 combines four channels in one package for multi-lane networking, optical-module, and backplane applications where parallel channel density is important. The VSC8247 operates across an 8.5 Gbps to 11.3 Gbps line rate, allowing one device family to cover multiple high-speed protocols. Supported applications include 10G Ethernet, SONET, 8G Fibre Channel, 10G QDR InfiniBand, and legacy rates. Its four-channel architecture also makes it suitable for emerging 4×10G and 10×10G CFP-module architectures, as well as high-density photonic integrated circuit designs. Four outputs give each recovered channel a corresponding output path for downstream circuitry. The device integrates clock recovery and retiming functions rather than functioning only as a passive clock distributor. Retiming establishes a new sampling boundary for received serial data, while clock recovery provides a stable timing reference for the associated channel. This is important in multi-gigabit links where transmission-line effects, package parasitics, connector transitions, and inter-symbol interference can degrade the eye opening. The Microchip VSC8247 datasheet identifies the family as a versatile CDR and retimer for 10G-class serial communication. Typical deployments include 10G Ethernet equipment, SONET/SDH interfaces, Fibre Channel systems, QDR InfiniBand links, CFP optical modules, and high-density photonic integrated circuits. The quad-port configuration reduces the number of discrete timing devices needed in a four-lane design, while a single 13 mm by 13 mm FCBGA can support dense line-card and pluggable-module layouts. Designers should evaluate the complete receiver channel rather than relying on nominal line-rate capability alone. Signal losses, connector and package parasitics, reference-clock quality, board-level jitter, and the available power architecture can all affect margin. Confirm the manufacturer’s recommended layout, reference-clock requirements, decoupling network, impedance-controlled interfaces, and thermal conditions against the Microchip VSC8247 datasheet before releasing a high-speed PCB. This product summary consolidates the verified operating range, channel count, output count, supported protocols, package information, and manufacturer datasheet reference for engineers evaluating the VSC8247YJB-02 in high-speed serial-interface designs.

RFQ پەیوەندی
VSC8248KITEV - Application-Specific Clock/Timing IC | Microchip
VSC8248KITEV

VSC8248KITEV - Application-Specific Clock/Timing IC | Microchip

The Microchip Technology VSC8248KITEV is an application-specific clock and timing integrated circuit listed for clock buffers, drivers, and interface-controller applications. The device is identified by the full VSC8248KITEV ordering code, but the accessible manufacturer and distributor records do not expose its complete electrical specifications, package dimensions, pin configuration, frequency range, or operating-temperature limits. The part is therefore presented as a specialized timing-control device rather than being assigned unverified performance values. An application-specific clock/timing IC is a semiconductor that generates, redistributes, buffers, conditions, or controls clock signals within a larger electronic system. Clock and timing ICs sit within the broader clock and timing IC category, where they support digital logic, communications equipment, industrial controls, and other systems that depend on stable signal propagation. The VSC8248KITEV is specifically categorized as an IC interface controller by multiple product records. The primary identified feature is its specialized role in clock and timing signal handling. Unlike a general-purpose microcontroller, this device is intended to support the timing architecture of its host equipment. Its ordered suffix includes the KITEV package and temperature-grade identifier, but the accessible records do not provide enough information to map those codes to confirmed package dimensions, pin count, lead finish, temperature range, or qualification status. The physical package and symbol should be confirmed against the manufacturer datasheet before PCB layout or schematic release. The part is listed by Microchip Technology and is distributed as an application-specific clock/timing component. Current catalog pages identify inventory and ordering information, including the VSC8248KITEV-ND ordering representation used by one authorized channel. However, the listings do not expose explicit quantity-break prices in the retrieved text, so no price tier is reproduced on this page. Current sourcing, lead time, and stock status should be requested through the quote form on this page. Typical design roles for this device include clock distribution, interface timing control, communications equipment, industrial electronics, and embedded control systems. Because the exact input and output ranges are not stated in the accessible records, designers should confirm signal amplitudes, frequencies, supply requirements, I/O standards, and timing tolerances before selecting pull-up resistors, termination networks, or downstream clock devices. Those decisions must be based on the manufacturer pin description and electrical characteristics rather than assumptions based on the clock-buffer category alone. The primary design consideration is to treat VSC8248KITEV as a timing-critical component. Validate the complete clock path with worst-case loading, enable sequencing, power-up behavior, and propagation-delay variation. Review the package drawing and pin-description table during schematic capture, then preserve the manufacturer's recommended layout and decoupling guidance in the PCB implementation. If those items remain unavailable, obtain the controlled manufacturer datasheet before releasing a high-volume or safety-related design. This page consolidates the confirmed manufacturer identity, category, ordering code, current catalog sources, application context, and engineering checkpoints for VSC8248KITEV. It clearly separates confirmed information from parameters requiring manufacturer documentation, helping engineers evaluate sourcing and design readiness without presenting unverified numerical specifications as facts.

RFQ پەیوەندی
VSC8248YJH-01 - 11.3 Gbps Quad CDR | Microchip Technology
VSC8248YJH-01

VSC8248YJH-01 - 11.3 Gbps Quad CDR | Microchip Technology

The Microchip Technology VSC8248YJH-01 is a quad-channel clock and data recovery (CDR) integrated circuit designed for 8.5 Gbps to 11.3 Gbps high-speed serial links. The device includes clock and data recovery with error detection and correction (EDC) for XFI-to-XFI+ conversion and is supplied in an orderable package identified by the YJH designator. A CDR is a high-speed line interface component that recovers a serial bit stream and its associated clock from a waveform that may have accumulated timing distortion, noise, and jitter during transmission. Positioned within clock and timing integrated circuits, the VSC8248 family supports network equipment operating at 10 Gb/s class line rates. Multiple recovered channels allow one device to serve interfaces that require parallel clock-and-data recovery rather than a single-lane retimer. The VSC8248 supports data rates from 8.5 Gbps through 11.3 Gbps. This range covers 1.25 Gb/s Ethernet, 2 Gb/s and 4 Gb/s Fibre Channel, and 2.5 Gb/s and 5 Gb/s InfiniBand applications identified in the product documentation. At the upper operating region, its 11.3 Gbps capability supports modern 10 Gb/s networking and related optical or copper transport systems without requiring a separate recovery function for each lane. The principal feature set includes four CDR channels, XFI-to-XFI+ conversion, and EDC capability. XFI provides a wide parallel data interface for transmitting serialized high-speed data, while XFI+ includes clock-forwarding information. Supporting conversion between these interface forms allows a system to bridge legacy XFI connections to newer XFI+ endpoints while recovering the transmitted clock. EDC helps correct transmission errors that may occur in the physical link. Typical deployments include 10 Gb/s Ethernet switching equipment, Fibre Channel systems, InfiniBand adapters, optical network terminals, and network interface cards. The multi-lane architecture can reduce component count in quad-port designs while centralizing clock recovery, error correction, and interface conversion. Its multi-gigabit data-rate range makes it suitable for equipment designs that must bridge protocol or physical-layer variations while maintaining a common high-speed fabric. For layout and implementation, preserve controlled-length and impedance-continuous high-speed connections, provide compliant termination and decoupling, and follow the manufacturer’s recommended reference design. Differential and high-speed clock/data paths require short return paths and careful isolation from noisy power converters. Confirm the exact YJH package dimensions, exposed-pad arrangement, pin assignments, and thermal limits against the manufacturer datasheet before releasing PCB artwork. This page combines the manufacturer product information with a practical view of protocol applications, interface considerations, sourcing options, and validated drop-in alternatives. It is intended to help engineers identify whether the VSC8248YJH-01 matches a high-speed recovery requirement before beginning board-level implementation.

RFQ پەیوەندی
VSC8248YJH-02 - 4-Port 11.3 Gbps SFI-to-XFI CDR | Microchip
VSC8248YJH-02

VSC8248YJH-02 - 4-Port 11.3 Gbps SFI-to-XFI CDR | Microchip

The Microchip Technology VSC8248YJH-02 is a four-port clock and data recovery (CDR) application-specific IC that converts serial interface (SFI) signals into extended small form-factor pluggable (XFI) signals at data rates from 8.5 Gbps to 11.3 Gbps. The device includes integrated electronic dispersion compensation (EDC) and is packaged in a 225-FCBGA measuring 16 mm by 16 mm. A clock and data recovery IC is a timing-recovery semiconductor used in high-speed serial links to recover the transmitted clock from the data stream and regenerate a synchronized data output. In the broader hierarchy, the VSC8248 belongs to clock and timing ICs, interface ICs, and application-specific clock/timing semiconductors. Its four-port architecture allows one device to serve multiple high-speed channels while centralizing configuration and diagnostics. The principal operating capability is the supported 8.5 Gbps to 11.3 Gbps per-channel data-rate range. Four outputs support independent high-speed interface channels, while integrated EDC extends usable reach by compensating signal degradation. The manufacturer documentation also identifies programmable output and integrated diagnostics as major device features, making the IC suitable for systems where link health must be monitored during operation rather than only during manufacturing. The VSC8248YJH-02 is intended for optical and copper Ethernet infrastructure equipment operating at multi-gigabit line rates. Its SFI-to-XFI conversion function allows a system to use different serial-interface conventions on the line-card and backplane sides. The 225-FCBGA package provides a high pin count for power distribution, high-speed differential signaling, configuration, monitoring, and diagnostic functions, but it also requires a dense multilayer PCB and careful high-speed layout practices. Typical applications include Ethernet switches, routers, optical line cards, network-interface equipment, telecommunications aggregation systems, and high-speed backplane equipment. The four-channel organization can reduce the number of discrete conversion devices required in a multiport line card while providing consistent clock recovery and diagnostics across channels. Designers should preserve controlled-impedance routing for every high-speed differential pair, maintain continuous reference planes, and place decoupling and clock-support components according to the manufacturer evaluation-board layout. Because the FCBGA has a dense pitch and numerous supply connections, power and ground planes require careful partitioning to prevent coupled noise from degrading CDR margin. Production designs should also validate the complete SFI and XFI channel in the target connector, cable, optical, or backplane environment. This product page combines the verified device identity, package format, interface conversion, supported data-rate range, and EDC capability with practical PCB guidance, application guidance, and strict drop-in-replacement analysis. The component is positioned for engineers evaluating a four-port, 11.3 Gbps-capable CDR rather than a general-purpose clock generator or conventional low-speed clock buffer.

RFQ پەیوەندی
VSC8248ZREV - 11.3 Gbps Quad CDR | Microchip Technology
VSC8248ZREV

VSC8248ZREV - 11.3 Gbps Quad CDR | Microchip Technology

Microchip Technology VSC8248ZREV is a four-channel clock and data recovery device operating from 8.5 Gbps to 11.3 Gbps. It integrates adaptive electronic dispersion compensation for high-speed optical and backplane links and is supplied in a bulk package configuration. A clock and data recovery device, commonly called a CDR, extracts a usable data stream from a high-speed serial link and recovers the associated clock. This function sits within the physical-layer hierarchy of optical communications, Ethernet, Fibre Channel, and InfiniBand equipment. By regenerating timing and signal integrity at the receiver, a CDR allows downstream circuitry to operate without directly processing the degraded waveform received over a long channel. The VSC8248ZREV provides four recovery channels, programmable input equalization, and a KR-compliant multi-tap output driver. Adaptive electronic dispersion compensation helps compensate for channel-related signal degradation. Together, these features target difficult printed-circuit-board and optical backplane channels where frequency-dependent loss, reflections, and timing distortion can impair data recovery. The device supports operation from 8.5 Gbps through 11.3 Gbps and is associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand protocols. These protocol associations make the device relevant to 10G Ethernet, Fibre Channel, and InfiniBand signal paths, provided that the complete system timing, reference clock, and lane configuration satisfy the device requirements. Typical applications include 10G Ethernet optical-module receivers, Fibre Channel switching equipment, InfiniBand adapters, backplane equalizers, and high-speed serial retiming subsystems. In each case, the CDR can reconstruct the receive clock while equalization and dispersion compensation improve signal margin before data reaches the packet-processing or framing layer. Designers should evaluate the recovered-clock behavior, reference requirements, lane-to-lane skew, channel loss, and firmware configuration before committing a board layout. The bulk package designation indicates a shipment format rather than a surface-mount form factor, so the exact mechanical package, land pattern, pin count, and solder process must be confirmed before PCB design begins. This product overview connects protocol support, recovery bandwidth, equalization, adaptive dispersion compensation, and replacement considerations to help engineers determine whether the VSC8248ZREV fits a specific 10G-class link architecture.

RFQ پەیوەندی
ZL30772LFG7 - Dual-Channel IEEE 1588/SyncE Packet Clock Synchronizer | Microchip
ZL30772LFG7

ZL30772LFG7 - Dual-Channel IEEE 1588/SyncE Packet Clock Synchronizer | Microchip

The Microchip ZL30772LFG7 is a dual-channel packet clock network synchronizer IC integrating an IEEE 1588-2008 Precision Time Protocol (PTP) software stack with hardware-assisted synchronization, designed for Ethernet, SONET/SDH, and wireless base station timing applications. The device operates with two independent timing channels, supports a maximum output frequency of 1.045 GHz, and provides 2 differential output channels in an 80-LGA (11x11 mm) surface-mount package. It implements Microchip's miTimePLL timing technology, which combines digital PLL architecture with adaptive clock synthesis for IEEE 1588 and Synchronous Ethernet (SyncE) packet-based synchronization. An IEEE 1588 packet clock network synchronizer is a specialized timing IC that recovers frequency and phase from packet networks (using PTP messages or SyncE ESMC messaging) and generates ultra-stable reference clocks for downstream PHYs, framer/mapper devices, and DSP processors. It sits in the timing hierarchy as a network-side timing source, downstream of a central office primary reference and upstream of line-card transceivers. ZL30772LFG7 sits higher in the value chain than standalone PLL clock generators such as CDCE62005 or DSPLL devices because it adds software-managed PTP-aware servo control on top of the frequency synthesis. Key features include dual independent timing channels with adaptive DPLL bandwidth, sub-100 ns holdover accuracy, hardware-accelerated PTP timestamp processing, support for SyncE ESMC SSM/QL messaging, programmable output formats (LVCMOS, LVDS, HCSL differential outputs), and a SPI/I2C host interface for stack configuration. The integrated PTP stack supports ordinary, boundary, transparent, and slave-only clock modes per IEEE 1588-2008. Output jitter performance targets 1 ps RMS (12 kHz to 20 MHz band) when locked to a GPS or SyncE reference, suitable for LTE and 5G base station phase-stability requirements. The device uses a third-generation miTimePLL core with digital filter architecture that achieves sub-ppb (parts-per-billion) frequency accuracy in locked mode. Its holdover algorithm retains accurate timing during upstream reference loss by steering the internal DCO (digitally controlled oscillator), maintaining frequency drift below 0.01 ppb for short holdover intervals. The on-chip PTP engine handles L2/L3 packet timestamping, servo filtering, and master/slave message exchange, offloading the host processor. Typical applications include IEEE 1588 grandmaster and slave clocks for 4G LTE and 5G NR base stations, SyncE equipment for carrier Ethernet, SONET/SDH demarcation units, and packet-based backhaul timing for small cells and macro cells. The wide frequency coverage (1 Hz to 1.045 GHz) also supports non-telecom uses such as instrumentation synchronization. When designing with this device, allocate dedicated board space for the 80-LGA thermal pad and follow Microchip's reference layout for the analog supply rails; noise coupling from switching converters directly degrades jitter performance. Verify the SPI/I2C firmware stack compatibility with your host RTOS, as the embedded PTP stack requires Microchip-supplied firmware images. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet for engineers evaluating the ZL30772LFG7.

RFQ پەیوەندی