بەرهەمەکان (970+)

SY89872UMI - 2GHz 1:3 LVDS Clock Fanout Buffer | Microchip
SY89872UMI

SY89872UMI - 2GHz 1:3 LVDS Clock Fanout Buffer | Microchip

The Microchip Technology SY89872UMI is a 1:3 clock fanout buffer and programmable divider IC with a maximum operating frequency of 2 GHz, differential LVDS outputs, and a 16-VFQFN exposed-pad package. It accepts CML, HSTL, LVDS, or LVPECL input formats and operates from a 2.5 V supply. These characteristics place it in the clock distribution and generation segment of clock and timing integrated circuits. A clock fanout buffer is a timing integrated circuit that distributes one input clock to multiple synchronized outputs. Clock buffers and drivers belong to the broader clock distribution and generation hierarchy, where they support high-speed communications, processors, converters, and test equipment. A divider can reduce the incoming clock frequency, while the fanout stage provides multiple copies of the resulting clock. Differential clocking helps preserve signal integrity when traces must travel between distant circuit blocks. The SY89872UMI combines a 1:3 fanout ratio with a 2 GHz maximum frequency in one compact package. Its input receiver supports CML, HSTL, LVDS, and LVPECL signaling, allowing the device to work with several high-speed clock sources. LVDS is used at the outputs, and the 16-VFQFN package includes an exposed pad that provides a defined thermal-coupling path on the PCB. Internal termination is identified in the manufacturer documentation. The SY89872U family combines programmable clock division with fanout buffering. Programmable division allows a system clock to be reduced when a downstream circuit cannot operate at the source rate. The 1:3 topology then distributes the selected clock to three destinations, reducing the number of separate buffer devices required on a board. Its differential interfaces support point-to-point links carrying complementary clock signals. Typical applications include high-speed serial-interface clock distribution, communication equipment, data-converter clocking, FPGA or ASIC clock distribution, and instrumentation requiring multiple synchronized outputs. A three-output arrangement is particularly useful when related circuits require one common clock but are separated by PCB-routing distance. Differential LVDS outputs are useful where trace length, ground references, or nearby switching circuitry could degrade a single-ended clock. PCB implementation should follow the manufacturer pinout and layout guidance, especially for the exposed pad, supply decoupling, differential input routing, and output termination. Keep the clock path short and symmetrical, provide a continuous ground reference, and place decoupling capacitance close to the supply pins. Confirm the programmed divide setting, supported input logic level, termination requirements, and output timing against the system clock specification before production release. This product page organizes the principal device characteristics, application guidance, design considerations, and drop-in alternatives for engineering evaluation. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet before schematic release or qualification.

RFQ پەیوەندی
SY89873LMG - 2 GHz LVDS Clock Divider | Microchip
SY89873LMG

SY89873LMG - 2 GHz LVDS Clock Divider | Microchip

The Microchip Technology SY89873LMG is a 3.3 V precision programmable clock divider and three-output LVDS fanout buffer packaged in a 16-pin QFN with exposed pad. It operates up to 2.0 GHz output toggle frequency, accepts high-speed differential CML, LVPECL, HSTL, or LVDS clock inputs, and divides the input frequency to generate a frequency-locked lower-frequency clock. A clock divider is a timing IC that reduces an input clock frequency by a controlled ratio while preserving the relationship between the source clock and derived outputs. Clock dividers and fanout buffers belong to the clock and timing IC hierarchy, where they support clock generation, distribution, frequency translation, and programmable timing in communication, networking, and digital processing systems. The SY89873LMG combines division with three LVDS outputs to distribute one divided clock across multiple loads. Key features include support for AC- or DC-coupled differential inputs, a maximum output toggle frequency of 2.0 GHz, a maximum input frequency of 3.0 GHz, and internal input termination. The three-output architecture reduces the need for separate fanout stages, while the programmable divider allows a system clock to be translated to a lower frequency without introducing an unrelated free-running oscillator. Low-skew and low-jitter operation are central requirements for maintaining timing relationships across parallel LVDS clock domains. The device accepts CML, LVPECL, HSTL, and LVDS input standards, allowing it to operate near many high-speed differential clock sources. Its 3.3 V supply and LVDS output interface place it between the clock-generation and receiver stages of a high-speed system. The internal termination feature helps control impedance at the differential input, but the input network and PCB transmission lines still require careful implementation to minimize reflections and maintain signal integrity. Typical uses include clock division and fanout for communications equipment, network-interface subsystems, backplanes, and high-speed digital logic. It can also support clock-tree designs in industrial and test systems where a source clock must be divided before being distributed to multiple LVDS receivers. The device is particularly relevant where several destinations need a common divided clock and predictable relative timing. For PCB implementation, place the SY89873LMG close to the source clock and route the differential input and LVDS outputs as controlled-impedance pairs. Keep the exposed-pad layout consistent with the manufacturer’s recommended thermal and land-pattern guidance. Confirm the selected divider ratio, termination arrangement, and output timing budget during system validation. This product summary combines the manufacturer’s clock-function description with package, interface, frequency, and application context. It also provides selection guidance, design notes, and verified sourcing information to help engineers evaluate the SY89873LMG before integrating it into a precision LVDS clock tree.

RFQ پەیوەندی
SY89873LMI - 2 GHz 1:3 LVDS Clock Fanout | Microchip
SY89873LMI

SY89873LMI - 2 GHz 1:3 LVDS Clock Fanout | Microchip

The Microchip Technology SY89873LMI is a 2 GHz clock fanout buffer and divider IC with a 1:3 fanout ratio, LVDS outputs, and support for CML, HSTL, LVDS, and LVPECL inputs. It is packaged in a 16-lead VFQFN exposed-pad, 16-MLF surface-mount package for high-speed clock distribution on compact printed circuit boards. A clock fanout buffer is a clock-timing semiconductor that receives one differential clock and reproduces it across multiple outputs. Clock and timing ICs form part of the broader digital semiconductor hierarchy, supporting processors, network interfaces, serializers, test equipment, and communication systems. The SY89873LMI’s divider and fanout functions can distribute a common reference signal while limiting loading and maintaining signal integrity. Key features include a maximum operating frequency of 2 GHz, a 1:3 output configuration, and LVDS clock outputs. The input stage accepts CML, HSTL, LVDS, and LVPECL logic levels, allowing interoperability with common high-speed clock sources. Its 16-VFQFN exposed-pad package supports compact placement while providing a thermal pad for heat dissipation. These characteristics suit systems requiring multiple low-voltage differential clock outputs. The device combines a clock input stage, fanout and divider circuitry, and three differential output drivers in one integrated package. Differential LVDS output signaling reduces common-mode noise sensitivity and supports reliable propagation across controlled PCB traces. The exposed pad must be connected to the appropriate ground plane according to the manufacturer’s land-pattern and layout instructions, while input and output return paths require short, controlled-impedance routing. Typical uses include networking and communications equipment, high-speed serial links, clock-tree distribution, data-converter systems, and instrument clocks. It can also serve as a local fanout stage where a system clock must reach several subsystems without loading the oscillator or upstream PLL directly. Configuration, termination, and decoupling details should be selected for the actual clock standard and trace environment. For reliable deployment, use the manufacturer’s reference layout and pin-description table, provide the input interface with the required termination, and route LVDS pairs as controlled-impedance differential pairs. The exposed ground pad and supply connections should be connected according to the package drawing, with high-frequency return paths kept continuous. This page consolidates device specifications, sourcing guidance, engineering design notes, application analysis, and a transparent assessment of drop-in alternatives. It helps engineers identify whether the SY89873LMI matches the required clock topology, package, interface standard, and board-level integration constraints.

RFQ پەیوەندی
SY89874UMG - 2.5 GHz 1:2 Clock Fanout Buffer | Microchip
SY89874UMG

SY89874UMG - 2.5 GHz 1:2 Clock Fanout Buffer | Microchip

Microchip Technology SY89874UMG is a programmable clock divider and fanout buffer that accepts a high-speed differential clock input and produces divided clock outputs for digital logic. The device operates from a 2.375 V to 3.63 V supply, supports input frequencies as high as 2.5 GHz, and is packaged as a 16-VFQFN with an exposed pad. According to Microchip documentation, it can accept CML, LVPECL, LVDS, or HSTL clock inputs and can create a frequency-locked, lower-speed version of the incoming signal. A clock buffer is a digital semiconductor device used to distribute one clock signal to multiple destinations while controlling impedance, edge rate, skew, and loading. Clock divider and fanout buffers belong to the broader clock and timing IC family, where they support clock generation, frequency translation, distribution, and sequencing functions in communications, industrial, and computing systems. This device combines those functions in one package rather than requiring separate divider and fanout stages. Key characteristics include a maximum clock frequency of 2.5 GHz, a programmable divide ratio, low-skew and low-jitter operation, and 2.5 V or 3.3 V LVPECL output capability. The 16-VFQFN exposed-pad package supports compact high-speed layouts while providing a thermal and ground connection beneath the device. Differential clock routing helps reduce susceptibility to common-mode noise, although correct termination and controlled impedance remain essential. The SY89874U family is associated with clock-tree designs that require a lower-speed derivative of a high-frequency source. Typical uses include communications clock distribution, processor and serializer clock conditioning, data-converter clocking, industrial control systems, and test-and-measurement equipment. The differential input can be driven from CML, LVPECL, LVDS, or HSTL-compatible sources when their voltage and termination requirements are satisfied. For layout, route the differential clock pair as a short, tightly coupled pair and place termination close to the receiving device. Keep the output return path continuous and observe the exposed-pad connection requirements in the manufacturer datasheet. Decoupling capacitors should be positioned near the supply and ground pins to minimize supply inductance and edge-rate distortion. This page combines the product identity, manufacturer family information, price-evidence checks, drop-in cross-reference results, and application-focused design guidance. It also distinguishes the verified SY89874UMG ordering code from the SY89874U family entry and identifies where additional datasheet parameters must be checked before release to production.

RFQ پەیوەندی
SY89874UMI - 1:2 2.5 GHz Clock Buffer | Microchip Technology
SY89874UMI

SY89874UMI - 1:2 2.5 GHz Clock Buffer | Microchip Technology

The Microchip Technology SY89874UMI is a 1:2 programmable clock divider and fanout buffer with a maximum clock frequency of 2.5 GHz, CML, HSTL, LVDS, and LVPECL input compatibility, and LVPECL outputs, housed in a 16-VFQFN exposed-pad package. It also includes internal termination for simplified high-speed clock distribution designs. A clock fanout buffer is a clock-and-timing integrated circuit that distributes one incoming clock signal to multiple outputs while preserving signal amplitude, timing, and edge quality. The SY89874UMI belongs to the broader hierarchy of clock buffer, fanout buffer, clock divider, clock-and-timing IC, and semiconductor. Its 1:2 distribution ratio makes it useful where one source must feed two independent clock domains or output branches. The device supports a 2.5 GHz maximum frequency, giving it useful performance for high-speed communications, processor, networking, and test equipment clock trees. The input stage accepts CML, HSTL, LVDS, and LVPECL signaling, while its outputs use LVPECL. Internal termination reduces the need for separate input termination networks when the board layout and signal environment are appropriate. As a programmable clock divider/fanout buffer, the SY89874UMI can combine distribution with programmable divide functionality. This integration can reduce the number of separate clock components and simplify board partitioning. The 16-VFQFN package with exposed pad also supports compact layouts, although correct thermal management and high-speed layout practices remain essential. Typical applications include 1-to-2 fanout for communications transceivers, programmable clock distribution in network equipment, clock division for test and measurement systems, processor clock routing, high-speed backplane distribution, and generation of synchronized LVPECL clocks for high-speed mixed-signal systems. Design the input and output paths as controlled-impedance transmission lines, keep clock traces short, and provide continuous reference planes beneath the device. Use the exposed pad as a thermal and high-frequency return path, follow the manufacturer's recommended decoupling arrangement, and verify termination behavior for each supported input standard. This product page combines the exact device characteristics with practical clock-tree guidance, application-oriented design notes, and a parameter comparison against same-package alternatives. It is intended to help engineers evaluate signal compatibility, frequency headroom, package reuse, and implementation constraints before committing to a PCB design.

RFQ پەیوەندی
SY89875UMG - 2 GHz 1:2 LVDS Clock Buffer | Microchip
SY89875UMG

SY89875UMG - 2 GHz 1:2 LVDS Clock Buffer | Microchip

Microchip Technology SY89875UMG is a 2.5 V programmable clock divider and 1:2 fanout buffer designed for high-speed differential clock distribution. It supports any differential input, including CML, HSTL, LVDS, and LVPECL, and provides two LVDS outputs in a 16-VFQFN exposed-pad package. The device operates across a 2.375 V to 2.625 V core-supply range and a -40°C to +85°C temperature range. A clock buffer is a clock-and-timing IC that reproduces or redistributes a timing signal while preserving signal integrity, fanout capability, and controlled impedance. The SY89875UMG belongs to the clock-buffer and clock-driver hierarchy, where differential fanout devices support communication links, processor interfaces, test equipment, and other high-speed systems. Its combination of differential input flexibility and LVDS output makes it useful when a source must drive multiple destinations without introducing excessive skew or reflection. The SY89875UMG accepts differential inputs through a termination network exposed at the VT pin. This arrangement allows the circuit to accommodate CML, HSTL, LVDS, and LVPECL source logic. A VREF-AC reference supports AC-coupled applications, while the programmable divider function adds frequency division capability. Maximum operating frequency is 2 GHz, and the 1:2 topology provides two outputs from the differential input. The device is particularly useful when a board must fan a high-speed differential clock out to two receivers while maintaining low-voltage differential signaling. Because LVDS is a current-oriented interface, correct source termination, controlled-impedance routing, and receiver-end placement remain central to reliable signal propagation. The SY89875UMG is intended for 2.5 V systems, so its core supply and interface voltages must be checked against the connected transmitter and receiver specifications before layout release. Typical applications include LVDS clock distribution for high-speed serial communication, source-synchronous interfaces, telecommunications equipment, industrial control systems, and data-conversion platforms. The 2 GHz operating limit supports demanding clock trees, while the programmable divider provides flexibility when the downstream system requires a divided clock rather than a direct fanout. The exposed pad also requires attention to thermal and electrical layout practices. Place input, output, supply, and ground connections according to the manufacturer pin-description table. Keep differential traces tightly coupled, use the manufacturer-recommended termination approach, and provide low-impedance planes for return currents. Treat exposed-pad thermal performance as a function of copper area, via distribution, airflow, and adjacent heat sources rather than as a fixed device property. This page combines device specifications, source links, application guidance, and engineering design notes to support clock-tree architecture decisions. It also distinguishes documented functions from parameters that still require confirmation, helping engineers plan sourcing and schematic review without relying on unsupported assumptions.

RFQ پەیوەندی
SY89875UMI - 2GHz 1:2 LVDS Clock Buffer | Microchip
SY89875UMI

SY89875UMI - 2GHz 1:2 LVDS Clock Buffer | Microchip

The Microchip Technology SY89875UMI is a 2.5 V precision-edge programmable clock divider and 1:2 fanout buffer with a maximum operating frequency of 2 GHz, differential inputs, LVDS outputs, and internal input termination. The device is offered in a 16-VFQFN exposed-pad package identified as 16-MLF. A clock buffer is a digital timing IC that receives a reference clock and reproduces or distributes that signal with low timing degradation. Clock dividers reduce a clock to a lower frequency, fanout buffers create multiple outputs, and differential signaling carries timing information across a PCB using complementary data pairs. These functions place the SY89875UMI within the clock and timing IC hierarchy of digital logic and semiconductor-based system timing. The principal features of the SY89875UMI include a 1:2 fanout ratio, programmable clock division, differential input support, LVDS output support, and internal termination. The manufacturer identifies the device as accepting any differential input type while supporting CML, HSTL, LVDS, and LVPECL input signaling. This versatility allows the buffer to operate near several common high-speed clocking environments without requiring a separate input-conversion stage. At the circuit level, the SY89875UMI combines a programmable divider with two complementary clock outputs. Differential clock distribution reduces sensitivity to common-mode noise when the output is routed through controlled-impedance PCB traces. Internal input termination helps control the impedance presented by the differential input network, although the exact termination value and implementation details should be confirmed in the manufacturer datasheet and reference design before final signal-integrity calculations. Typical uses include LVDS clock distribution for communications equipment, programmable clock generation in server and networking systems, fanout to multiple downstream logic devices, and timing support in industrial or test systems. The 2 GHz operating limit suits high-speed digital backplanes and interfaces, while the 1:2 fanout allows one source clock to feed two destinations. PCB implementation requires careful attention to differential pair geometry, return-path continuity, and the exposed thermal pad. The 16-VFQFN footprint also demands an unobstructed ground and thermal-via arrangement beneath the device. Verify the complete pin assignment, input logic levels, divider configuration method, and output termination requirements against the manufacturer datasheet before releasing the layout. This page organizes the SY89875UMI specifications, sourcing questions, functional use cases, package information, and confirmed same-brand replacement information into an engineering-focused guide. The design notes and comparison tables also identify which parameters require confirmation before PCB or system-level qualification.

RFQ پەیوەندی
SY89876LMI - 2 GHz Programmable Clock Buffer | Microchip Technology
SY89876LMI

SY89876LMI - 2 GHz Programmable Clock Buffer | Microchip Technology

The Microchip Technology SY89876LMI is a 3.3 V, 2 GHz programmable clock divider and 1:2 fanout buffer with differential input-to-LVDS conversion, internal termination, and a 16-pin VFQFN exposed-pad package. It combines clock division, level conversion, and two-output distribution in one device for high-speed digital systems. A clock fanout buffer is a clock-and-timing semiconductor that distributes one input signal to multiple outputs while preserving edge timing and signal integrity. The SY89876LMI belongs to the Precision Edge product family and accepts differential CML, HSTL, LVDS, or LVPECL input standards. Its integrated function converts a differential clock into two LVDS outputs, reducing the number of separate divider, level-converter, and buffer components required in a clock tree. The device supports input clock frequencies up to 2 GHz and uses a 3.3 V supply. Its programmable clock-divider function allows one source clock to be divided before distribution, while the 1:2 output arrangement provides two independently usable LVDS clock paths. Internal input termination simplifies implementation with suitable differential clock sources and reduces the need for separate termination components on the input network. The SY89876LMI uses Microchip's Precision Edge technology to address demanding clock-distribution applications where low jitter, predictable edge quality, and compact implementation are important. A 1:2 fanout stage can distribute a divided or undivided clock to processors, serializers, transceivers, ADC or DAC clocking circuits, and data-conversion equipment. The exposed pad provides a thermal path from the device to the PCB copper, which is especially important when operating close to the maximum clock frequency. Typical uses include telecommunications line-card clocking, network-interface clock distribution, high-speed serial links, FPGA or ASIC auxiliary clock generation, and instrumentation requiring compatible differential clock signals. The device can simplify boards that otherwise require separate programmable dividers, logic-level converters, and clock buffers, reducing component count and potential clock-skew mismatches. PCB implementation should preserve controlled-impedance routing for differential inputs and LVDS outputs. Place the decoupling capacitor close to the supply pin, provide a continuous ground reference beneath the exposed pad, and use the manufacturer datasheet's recommended termination and layout geometry. Verify output timing, jitter, common-mode voltage, and signal amplitude on the target board because trace length and return-path discontinuities can affect high-speed clock performance. This page combines the device's core clock-tree functions, package information, application guidance, and same-family comparison details to support faster component selection and PCB implementation. The documented 2 GHz ceiling, 3.3 V operation, programmable division, differential-to-LVDS conversion, internal termination, and 1:2 fanout architecture are the principal engineering parameters for evaluating the SY89876LMI.

RFQ پەیوەندی
Si5330B-B00205-GM - 1:4 LVDS Clock Buffer 710 MHz 24-QFN
Si5330B-B00205-GM

Si5330B-B00205-GM - 1:4 LVDS Clock Buffer 710 MHz 24-QFN

The Skyworks Solutions Si5330B-B00205-GM is a 1:4 LVDS low-jitter, low-skew clock fanout buffer and level translator operating up to 710 MHz, housed in a 24-pin QFN with exposed pad. It accepts one single-ended or differential input and produces four differential (or eight single-ended) low-jitter LVDS outputs, making it well suited for high-performance PCB clock distribution. A clock buffer is a fanout device that takes one reference clock and produces multiple, phase-aligned copies for routing across a printed circuit board. Within the broader clock-tree hierarchy, the Si5330B sits between an upstream PLL/oscillator (frequency generation) and downstream transceivers, ASICs, FPGAs, or ADCs (clock consumption). Unlike a PLL-based clock generator, a buffer preserves the input frequency exactly and only regenerates the edges, minimizing added jitter and avoiding frequency translation artifacts. Key features include 710 MHz maximum input/output frequency, LVDS output format, 1:4 fanout, integrated input level translation (1.8 V, 2.5 V, or 3.3 V core with separate output-bank supply), and minimal crosstalk with strong supply-noise rejection. The exposed-pad QFN-24 package provides a low thermal resistance path for noise-sensitive systems. The device uses a differential LVDS output stage with internal source-terminated architecture, yielding sub-picosecond additive jitter at typical reference frequencies. Independent VDD pins for the input core and the output bank allow level translation without external circuitry, simplifying mixed-voltage designs. Typical applications include high-speed ADC/DAC sampling clocks, FPGA logic clock distribution, telecom/datacom line-card reference clocks, and PCI Express or serializer/deserializer reference fanout. Its low jitter makes it ideal for any noise-sensitive clock domain that needs a clean, multi-drop copy of a single reference. When designing with the Si5330B, follow the datasheet recommended termination for both LVDS inputs and outputs (typically 100 ohm differential) and decouple each VDD pin with a 0.1 uF ceramic placed as close to the IC as possible. The exposed pad must be soldered to a continuous ground plane for both thermal dissipation and controlled impedance. The custom B00205 ordering code defines the factory-set input/output configuration, so verify the variant matches your board's required direction. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on any single distributor listing.

RFQ پەیوەندی
Si5330B-B00205-GMR - 1:4 LVDS Clock Buffer 710MHz | Skyworks
Si5330B-B00205-GMR

Si5330B-B00205-GMR - 1:4 LVDS Clock Buffer 710MHz | Skyworks

The Skyworks Solutions (formerly Silicon Labs) Si5330B-B00205-GMR is a 1:4 LVDS low-jitter, low-skew fanout clock buffer and level translator housed in a 24-pin QFN-EP (4x4 mm) package. It accepts a single input clock and produces four differential LVDS outputs (or eight single-ended outputs) at frequencies from 5 MHz to 710 MHz, with guaranteed low additive jitter, low skew, and low propagation delay variability. A clock fanout buffer (also called a clock driver or clock distributor) is a semiconductor device that receives one input clock reference and replicates it onto multiple low-skew output clocks. Clock buffers sit in the timing-distribution hierarchy between an upstream PLL/oscillator and downstream loads such as FPGAs, ASICs, ADCs, DACs, and SerDes transceivers. By regenerating edges locally, they isolate the source from load-induced jitter and provide the deterministic phase alignment that high-speed digital links require. Differentiating features of the Si5330B family include a glitchless switching mux for redundant clocking applications, minimal cross-talk between outputs, and superior supply noise rejection that simplifies low-jitter distribution in noisy PCB environments. The device uses advanced CMOS technology, supports independent core and output-bank supply pins for integrated level translation without external circuitry, and accepts CML, HCSL, LVDS, or LVPECL inputs while driving LVDS outputs. The integrated input terminations remove the need for external resistor networks. From an architectural perspective, the Si5330B employs a precision differential input receiver followed by a low-jitter PLL-free fanout tree. Because the device does not synthesize new frequencies (it simply distributes and level-translates), its additive jitter contribution is small enough to preserve overall system margins even at 710 MHz operation. The output drivers are LVDS-compatible, providing the 350 mV swing required by ANSI/TIA/EIA-644 receivers. Typical additive jitter is in the sub-picosecond RMS range. Typical applications include clock distribution in communications infrastructure, redundant clocking for high-availability servers and storage, level translation between PECL/LVDS domains, and PCB-level fanout for FPGA, ASIC, and processor clock inputs. The wide 5-710 MHz operating range covers virtually all common telecom, networking, and computing reference frequencies. When designing with the Si5330B, designers should size the output-bank and core supply decoupling per Skyworks' reference layout and observe the LVDS receiver termination requirements (typically 100 ohm differential). The exposed pad must be soldered to a low-impedance ground plane for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives from the same Skyworks Si5330 family, and practical PCB layout notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
Si5341B-B04862-GM - 10-Output Ultra-Low Jitter Clock Generator | Skyworks
Si5341B-B04862-GM

Si5341B-B04862-GM - 10-Output Ultra-Low Jitter Clock Generator | Skyworks

The Skyworks Solutions Si5341B-B04862-GM is a pre-programmed, custom-configured variant of the Si5341B ultra-low jitter any-frequency clock generator family. The device delivers up to 10 differential or single-ended clock outputs at any frequency up to 750 MHz (with <350 MHz jitter-optimized outputs available), in a 64-pin QFN (9x9 mm) package with exposed pad for thermal dissipation. The on-board MultiSynth technology generates independent fractional-N synthesizers per output, allowing non-integer frequency relationships that cannot be realized by integer-N PLLs. A clock generator (also called a frequency synthesizer or PLL-based timing IC) is a mixed-signal integrated circuit that takes one or more low-jitter reference inputs (typically a crystal or LVDS/CMOS reference) and produces one or more precise output frequencies locked to that reference. Within the broader hierarchy it sits as: clock generator -> PLL/VCXO -> timing IC -> power management & signal chain. Unlike a simple clock buffer, a clock generator can translate frequency (e.g., 25 MHz in to 156.25 MHz out), translate format (LVCMOS to LVDS/LVPECL/HCSL/CML), and re-multiply reference, all while adding typically <100 fs RMS phase jitter to the signal. Key features of this Si5341B configuration include typical RMS phase jitter of 50 fs (12 kHz-20 MHz, per the Si5341/40 family datasheet), integrated LDOs that accept a single 1.8V/2.5V/3.3V supply, two differential reference inputs with automatic or manual switching, programmable output slew rate and amplitude, and per-output enable / glitchless start/stop. The device is configured via I2C/SPI and the Skyworks ClockBuilder Pro software. Architecturally the Si5341B combines a low-noise integer-N PLL locking to the reference, a MultiSynth fractional-N divider tree per output, and an output-driver block supporting LVCMOS, LVDS, LVPECL, HCSL, and CML. The MultiSynth architecture eliminates the need for bulky external VCXOs in most applications because any fractional multiplication ratio is supported without integer-boundary spurs. Typical applications include 10G/25G/100G Ethernet PHY clocking, OTN/WDM optical transport line cards, FPGA reference clock trees, broadcast video reference generation, JESD204B/C ADC and DAC sampling clocks, and PCIe Gen3/4/5 clock fan-out. Each output can be set independently so a single Si5341B-B04862-GM can replace multiple crystal oscillators on a high-density PCB. When designing with this part, follow the reference schematic in the Si5341/40 Family Reference Manual exactly. Place the 0.1 µF + 1 µF supply decoupling pair directly at the AVDD/VDD pins, route the reference input traces as 50 Ω controlled-impedance differential pairs, and provide a continuous ground plane beneath the exposed pad with at least 12 thermal vias to the internal layer. This page synthesizes Skyworks datasheet specifications, current distributor pricing as of 2026-10-10, drop-in replacement options within the Si5341/Si5340 family, and practical design notes that complement (but do not replace) the manufacturer documentation.

RFQ پەیوەندی
THS788PFD - 200 MHz Quad-Channel 13 ps TMU | Texas Instruments
THS788PFD

THS788PFD - 200 MHz Quad-Channel 13 ps TMU | Texas Instruments

The Texas Instruments THS788PFD is a four-channel time measurement unit (TMU) using time-to-digital converter architecture, with 8 ps single-shot accuracy, 13 ps resolution derived from an external 200 MHz controller clock, and a measurement result range of 7 s in a 100-pin HTQFP package. It supports a 200 MHz event-input rate and provides LVDS-compatible event inputs, an LVDS result interface, four event channels, and a synchronization channel. A time measurement unit is a specialized clock-and-timing semiconductor that converts the elapsed time between events into a digital result. The THS788 belongs to the TMU hierarchy, where its TDC architecture combines fine timing resolution with high-rate event capture. This makes it suitable for systems requiring precise timing rather than ordinary counting, including synchronized instrumentation, pulsed systems, test equipment, and communications or industrial timing subsystems. The key performance feature is 8 ps single-shot accuracy, supported by a 13 ps least-significant-bit resolution. The external controller clock operates at 200 MHz, and the event input rate can reach 200 MHz. The 7 s result range supports substantially longer measurement intervals than the 13 ps conversion resolution alone would imply, depending on the configured measurement sequence and system implementation. LVDS-compatible interfaces provide high-speed, noise-resistant signaling for demanding board environments. Technically, the THS788 uses a fast TDC architecture to perform time measurements across four event channels. Its inputs are designed for LVCMOS or LVDS signaling, while the result output is identified as LVDS. The synchronized architecture and dedicated sync channel make the device suitable for multi-event acquisition where repeatable timing relationships matter. The stated low temperature coefficient of 0.1 ps/°C indicates attention to timing stability over temperature. Typical applications include high-speed test and measurement systems, pulsed-signal analysis, synchronization of multiple timing events, industrial automation requiring deterministic event capture, and communications equipment that must measure narrow time intervals. The device can also support scientific instrumentation where event timing accuracy directly affects the quality of the collected result. Designers should treat the external 200 MHz clock, LVDS-compatible input routing, result interface, decoupling, and high-speed return paths as an integrated signal-integrity problem. Input timing, trace length, termination, and controller configuration must be evaluated together because the 13 ps resolution does not guarantee end-to-end system accuracy without clean clocking, controlled stimulus, and correct interface implementation. This page combines the verified manufacturer and distributor information for the THS788PFD with practical selection guidance, application analysis, pricing references, and an honest assessment of available drop-in alternatives.

RFQ پەیوەندی
THS788PFDT - 200MHz 4-Channel 8ps Timing IC | Texas Instruments
THS788PFDT

THS788PFDT - 200MHz 4-Channel 8ps Timing IC | Texas Instruments

The Texas Instruments THS788PFDT is a four-channel time measurement unit (TMU) built around a time-to-digital converter architecture, with 8 ps single-shot accuracy, 13 ps resolution derived from a 200 MHz external controller clock, and fast LVDS-compatible event inputs. The device is packaged in a 100-terminal 14 x 14 mm HTQFP surface-mount package and is intended for precision time-interval measurement applications. A time measurement unit is a specialized timing IC that converts the arrival time of an event into a digital value relative to a synchronization reference. The THS788 places a time-to-digital converter inside each measurement channel, allowing timing information to be captured with picosecond-class resolution instead of relying on a general-purpose counter clock. Its hierarchy runs from time measurement unit to time-to-digital converter, then to application-specific clock and timing IC and semiconductor. Key features include four measurement channels, 8 ps single-shot accuracy, 13 ps time-to-digital-converter resolution, and LVDS-compatible event inputs. The 200 MHz master clock determines the nominal TDC timing resolution, while a sync-channel input establishes time zero. According to the manufacturer product page, the device uses fast LVDS-compatible interfaces for its event inputs and supports calibrated timing calculations relative to the synchronization reference. The device supports fast event capture through hit latches, which latch an event edge before the timing data is processed. This architecture is useful when several channels must respond to closely spaced signals and the relative delay between them must be measured reliably. The controller interface and external clock remain essential parts of the measurement system because synchronization, calibration, and digital result transfer determine the integrity of the captured timing data. Typical applications include pulsed-laser range measurement, optical communication timing, radar and test instrumentation, high-speed trigger correlation, and industrial diagnostics that compare an event against a periodic reference. In such systems, the sync channel defines time zero, each event input records its relative arrival time, and the external controller applies calibration values before reporting the result. A critical design consideration is preserving the integrity of the 200 MHz reference clock and the LVDS-compatible event signals. Route timing-sensitive inputs as controlled-impedance nets, keep the clock away from high-current switching nodes, and use the exposed-pad land pattern and thermal vias recommended in the package drawing. Differential timing measurements are only as accurate as the reference distribution and input return-loss behavior of the complete board. This page consolidates the manufacturer timing specifications, package details, sourcing channels, and engineering guidance for the THS788PFDT, adding pin-connection and thermal-placement guidance that engineers would otherwise have to derive across multiple technical documents.

RFQ پەیوەندی
THS789PFD - Quad-Channel 200MHz Time Measurement IC | TI
THS789PFD

THS789PFD - Quad-Channel 200MHz Time Measurement IC | TI

Texas Instruments THS789PFD is a quad-channel time measurement unit (TMU) with a 200 MHz measurement clock, one output, and a 100-pin HTQFP package measuring 14 mm by 14 mm. The device is listed for commercial-grade operation from 0 °C to 70 °C and is supplied in a tray. Its verified product identity also includes an exposed thermal pad and surface-mount construction. A time measurement unit is a specialized clock-and-timing semiconductor that measures elapsed time by comparing reference events. A multi-channel TMU extends this function across several independent measurement paths, making it useful when a system must acquire timing relationships, delays, pulse widths, or event intervals without implementing each measurement function as discrete logic. The THS789 therefore belongs to the clock-and-timing IC category and the broader application-specific timing semiconductor hierarchy. The principal verified specifications are four measurement channels, a 200 MHz timing reference, and one output. The 200 MHz reference corresponds to a 5 ns reference period, while the quad-channel architecture permits parallel timing observations. The 100-pin HTQFP package provides numerous external connections for timing inputs, control, power, and outputs, while the exposed pad supports heat transfer from the device to the PCB. The THS789PFD is specifically identified as a Time Measurement IC and is marketed by DigiKey under the Application Specific Clock/Timing classification. This distinguishes it from conventional general-purpose timers by emphasizing precision event-interval measurement across four channels. The exact input voltage range, minimum measurable interval, timing accuracy, propagation delay, output characteristics, and power specifications are not included in the supplied verified excerpts and should be taken from the complete manufacturer datasheet before design release. Typical engineering uses include industrial automation equipment, communications timing analysis, instrumentation, automated test systems, and embedded systems that compare multiple event arrivals. The 100-pin package and exposed pad make careful PCB layout, grounding, and thermal management important. In multi-channel systems, signal integrity at the timing inputs can materially affect measurement consistency, so controlled impedance, short return paths, and clean reference distribution should be prioritized. A principal design trade-off is package size versus channel density: the 14 mm by 14 mm HTQFP offers extensive connectivity for four timing channels but requires more PCB area than a compact mixed-signal package. Engineers should also confirm the complete electrical limits and interface timing before substituting another device or extending the operating temperature beyond the verified 0 °C to 70 °C range. This product record combines verified manufacturer and distributor identity, package and ordering information, commercial availability, and explicit engineering guidance for evaluating the THS789PFD. It also distinguishes confirmed facts from parameters that still require review in the full Texas Instruments datasheet, supporting faster procurement and design planning without treating unverified specifications as guaranteed.

RFQ پەیوەندی
TMC2340AH5C - 16-Bit Dual DDS, 20 MHz | onsemi
TMC2340AH5C

TMC2340AH5C - 16-Bit Dual DDS, 20 MHz | onsemi

onsemi TMC2340AH5C is a direct digital synthesis, or DDS, integrated circuit that generates quadrature-matched pairs of 16-bit sine and cosine waveforms in DAC-compatible 16-bit offset-binary format. The device accepts a TTL clock and user-programmed 15-bit amplitude and 32-bit phase-increment values. Its specified clock-generator output rate is 20 MHz, while the 32-bit tuning-word width provides direct digital phase control. The TMC2340AH5C is supplied in a compact 121-PPGA package measuring 34.16 mm by 34.16 mm and operates from a 4.75 V to 5.25 V supply. These core parameters place it in the clock-generation, PLL, frequency-synthesizer, and direct-digital-synthesis categories, where precise waveform generation is required by communications, signal-generation, modulation, and demodulation systems. A DDS is a synthesizer architecture that advances a phase accumulator by a programmable phase increment on every input clock cycle. Unlike a traditional analog-tuned oscillator, its frequency and phase are represented digitally, allowing deterministic frequency changes without retuning a physical resonator. In the TMC2340A family, this architecture supports waveform synthesis, modulation, and demodulation while producing matched quadrature outputs for downstream I/Q processing. The principal features of the TMC2340AH5C include two simultaneous 16-bit DAC-format outputs, a 15-bit amplitude value, a 32-bit phase-increment tuning word, and a maximum clock input of 20 MHz. The amplitude and phase controls provide programmable signal adjustment, while the quadrature sine-and-cosine format supports complex-signal generation. The 5 V operating range is appropriate for systems that standardize internal digital and mixed-signal logic on a 5 V rail. Technically, the TMC2340AH5C combines digital phase accumulation with a waveform-generation stage that converts the selected phase and amplitude values into offset-binary output data. When driven by a periodic TTL clock, the device automatically advances through the selected waveform. The 32-bit tuning word gives a fine digital phase increment, while the 16-bit output resolution limits quantization to 16 bits per quadrature channel. The reported 20 MHz clock specification is the principal rate parameter for system timing and output-update calculations. Typical uses include communications test equipment, local-oscillator generation, modulation and demodulation blocks, arbitrary waveform generation, digital frequency synthesis, and I/Q signal-chain development. The matched sine and cosine outputs are especially useful when a downstream converter or RF chain requires two phase-related baseband signals. The primary design consideration is power sequencing. Because the specified supply range is only 4.75 V to 5.25 V, the device must not be exposed to voltage outside that range. Designers should also verify the complete pin assignment, clock jitter tolerance, output loading, and package-routing requirements against the manufacturer datasheet before laying out a 121-PPGA board. This product record combines the verified manufacturer-description parameters, distributor availability, package information, and current pricing while clearly identifying missing pin-level and lifecycle details. It also provides application guidance and comparison parameters without presenting unverified substitute parts as drop-in replacements.

RFQ پەیوەندی
TMC2340AH5C1 - 16-Bit DDS Synthesizer | onsemi | Signal Generation
TMC2340AH5C1

TMC2340AH5C1 - 16-Bit DDS Synthesizer | onsemi | Signal Generation

The onsemi TMC2340AH5C1 is a dual 16-bit direct digital synthesis IC with a 50 Msps maximum sampling rate, 32-bit phase-increment tuning, and a 15-bit user-programmed amplitude value. The device is supplied in a large PGA-style ceramic package identified by the source data as 121-BPGA or PPGA120. It generates matched quadrature sine and cosine waveforms in 16-bit offset-binary DAC-compatible format. A direct digital synthesizer, or DDS, is a clocked waveform-generation architecture in which phase and amplitude are represented numerically before conversion into an analog waveform. DDS belongs to the clock-generation and frequency-synthesis hierarchy, alongside PLLs and other programmable waveform sources. It provides direct control of phase increment and amplitude, allowing frequency and level changes to be represented digitally instead of through analog tuning networks. The TMC2340A performs waveform synthesis, modulation, and demodulation when supplied with a TTL clock and user-selected values. Its dual architecture produces quadrature-matched 16-bit sine and cosine outputs, while the documented 15-bit amplitude control provides a separate amplitude adjustment parameter. Output data uses 16-bit offset binary format, making the device suitable for systems requiring deterministic digital waveform data before DAC conversion. According to the manufacturer-hosted TMC2340A datasheet, the device accepts a TTL clock signal and generates the matched sine and cosine pair automatically. The available product listing reports a 40 MHz operating or clock-related figure alongside a 50 Msps sampling capability, while the phase increment is 32 bits and amplitude control is 15 bits. These figures should be matched to the specific clock, output interface, and system timing requirements during design review. Typical uses include precision signal generators, communication waveform sources, modulation and demodulation test equipment, and digital-to-analog converter front ends. Because the source describes DAC-compatible digital outputs, the component can also serve as the waveform engine in laboratory, industrial, and communications systems where repeatable phase and amplitude control is required. The principal design consideration is package and data-interface integration. The available listings conflict between a 121-BPGA description and a 120-terminal PPGA description, so engineers must verify the physical pad layout, pin numbering, and board footprint against the original manufacturer documentation before layout or replacement. This page consolidates the verified distributor and manufacturer-source details, explicitly identifies missing technical and commercial information, and separates known device capabilities from assumptions. That distinction is particularly important for this uncommon PGA-packaged DDS device, where package naming and pin documentation materially affect replacement feasibility.

RFQ پەیوەندی
TMC57750PM - RS-170 Timer Control IC | Texas Instruments
TMC57750PM

TMC57750PM - RS-170 Timer Control IC | Texas Instruments

The Texas Instruments TMC57750PM is a 1/4-inch RS-170 timer control integrated circuit with one output, supplied in a 64-LQFP 10 x 10 mm package. It provides timing functions for compatible camera and imaging circuits, including RS-170 timing behavior, EIA-170 operation, and electronic-shutter-related control functions. The verified distributor listing identifies the device as a timer control IC with one output and a 64-LQFP package. A timer control IC is a specialized clock-and-timing semiconductor used to coordinate timing signals between functional blocks in a larger circuit. Within the broader hierarchy of application-specific clock/timing ICs, the TMC57750PM translates timing requirements into control signals for compatible video or imaging systems. Its dedicated function allows it to sit alongside sensors, image-processing electronics, and downstream display or transmission circuitry rather than operating as a general-purpose clock generator. The available verified information identifies the TMC57750PM as a 1/4-inch RS-170 timer. Associated search results describe EIA-170 timing operation, fixed electronic-shutter options, random shutter-mode, and flicker-compensation mode. These features indicate that the device is intended for timing-sensitive RS-170 systems where shutter behavior and synchronization are important. Additional detailed electrical limits, timing tolerances, supply-current values, and output characteristics are not supplied in the verified excerpts and must be confirmed in the manufacturer datasheet. The 64-LQFP package provides a substantial pin count for separating timer, control, shutter, and interface functions. Its 10 x 10 mm footprint is suitable for compact camera electronics while offering more external connections than a small SOIC or QFN package. Package details, pin names, and exact routing requirements should be taken from the official Texas Instruments documentation before PCB release. Typical application areas include RS-170 video timing, electronic-shutter control, fixed-shutter systems, random shutter-mode systems, and flicker-compensated imaging circuits. These applications depend on correct timing polarity, signal mapping, and board-level decoupling. Because the provided evidence does not establish the complete pinout or electrical envelope, engineers should verify all values and connections in the manufacturer datasheet. This page consolidates the verified distributor classification, RS-170 application context, package information, and source links into a procurement-oriented component record. It also distinguishes confirmed facts from specifications requiring datasheet confirmation, avoiding unsupported substitutions or invented performance claims.

RFQ پەیوەندی
TPS3430WQDRCRQ1 - Automotive Window Watchdog | Texas Instruments
TPS3430WQDRCRQ1

TPS3430WQDRCRQ1 - Automotive Window Watchdog | Texas Instruments

Texas Instruments TPS3430WQDRCRQ1 is an automotive window watchdog timer with programmable watchdog window and programmable watchdog reset delay, supplied in a 10-VSON package measuring 3.00 mm by 3.00 mm. The device is designed to supervise automotive electronic systems by detecting both late service activity and activity outside a configured timing window. Its operating-temperature range is -40°C to +125°C, and the package uses wettable flanks for optical inspection. A window watchdog timer is a specialized form of watchdog timer that requires the monitored system to toggle its service signal within both an upper and lower timing boundary. Unlike a conventional timeout-only watchdog, a window watchdog can identify both a frozen system and operation that occurs too quickly. This makes it valuable in automotive controllers where correct task scheduling and deterministic control-loop activity must be verified. The TPS3430-Q1 family provides programmable watchdog timing and programmable reset delay. Its SET pins can disable the watchdog during development or power-on sequences, preventing unintended timeout events before the monitored application is ready. The small 3.00 mm × 3.00 mm 10-VSON package supports compact automotive control modules while wettable flanks improve assembly inspection. The TPS3430WQDRCRQ1 belongs to the clock and timing IC hierarchy as a supervisory timing device. Its watchdog window mechanism operates alongside the host processor rather than replacing it: the host must service the watchdog within the permitted interval, while the timer supplies a fault indication when service is missing, too early, or too late. The programmable reset delay adds a controlled response interval after a watchdog event. Typical uses include automotive body controllers, motor-control modules, battery-management systems, electronic control units, and other safety-relevant embedded platforms. Its -40°C to +125°C rating and automotive-oriented ordering designation make it suitable for designs operating across extended industrial temperatures. For automotive production designs, engineers should also verify the complete device qualification and documentation package rather than relying only on the ordering code. PCB implementation should place the watchdog and its associated bypass capacitor close to the host controller and power-entry circuitry. Keep the monitored service signal away from noisy power and switching-node routing, and validate both reset polarity and timeout behavior in the complete firmware state machine. The watchdog must remain disabled only during controlled startup or programming intervals. This page consolidates the verified manufacturer and distributor information, distinguishes the automotive window watchdog function from ordinary timeout devices, and provides practical selection, comparison, and design guidance. Exact electrical limits, threshold ranges, pin functions, qualification details, and volume pricing should be confirmed against the current manufacturer documentation before design release.

RFQ پەیوەندی
TS555CD - 2.7MHz CMOS Timer | STMicroelectronics | SOIC-8
TS555CD

TS555CD - 2.7MHz CMOS Timer | STMicroelectronics | SOIC-8

STMicroelectronics TS555CD is a single CMOS 555-type timer/oscillator operating from 2 V to 16 V, with a maximum frequency of 2.7 MHz and typical supply current of 100 µA at VCC = 5 V. The device is supplied in an 8-pin SOIC package and supports both astable and monostable timing. Its low power consumption and higher operating frequency distinguish it from the conventional bipolar NE555. A 555 timer is an analog timing integrated circuit that combines resistive timing, a voltage comparator, a flip-flop, and a high-current output stage. Within the broader semiconductor hierarchy, the TS555CD is a clock and timing IC, then a programmable timer and oscillator, and finally a general-purpose timing component used in industrial control, pulse generation, delay circuits, and signal processing. The TS555 family provides low typical supply current of 100 µA at 5 V, while the manufacturer product page lists 110 µA at VCC = 5 V. Its maximum astable frequency is 2.7 MHz, compared with 0.1 MHz for the conventional NE555. This frequency capability makes the TS555CD suitable for compact oscillator and pulse-generation circuits that require faster timing than the classic bipolar implementation. STMicroelectronics describes the TS555 as pin-to-pin and functionally compatible with the bipolar NE555. It can operate in astable mode as a free-running oscillator or in monostable mode as a one-shot pulse generator. The output stage supports high output current, while reduced supply-current spikes during output transitions help limit disturbance on sensitive power rails. Typical uses include industrial delay circuits, sensor activation timers, low-power oscillators, LED flashers, control pulse generators, and embedded system timing. Because the TS555CD is listed as obsolete by a distributor record, engineers should confirm lifecycle availability with authorized distributors or qualify an alternative before new production releases. Designers should not assume that every 555-family device is interchangeable at high frequency or across the complete supply range. Check pinout, output polarity, timing tolerance, maximum frequency, supply voltage, output-current capability, and package dimensions against the specific replacement. Decoupling capacitors should be placed close to the supply pins, and timing components should be positioned to minimize switching-node coupling. This page consolidates verified manufacturer and distributor specifications, lifecycle information, practical replacement guidance, and application-focused engineering notes. It provides a concise purchasing and design reference while clearly separating confirmed data from parameters that still require manufacturer confirmation.

RFQ پەیوەندی
TS555CDT - 2.7 MHz CMOS Timer | STMicroelectronics
TS555CDT

TS555CDT - 2.7 MHz CMOS Timer | STMicroelectronics

The STMicroelectronics TS555CDT is a single CMOS programmable timer and oscillator rated for operation up to 2.7 MHz, with a typical supply current of 110 µA at 5 V, housed in an 8-pin SOIC package. The device supports a 2 V to 16 V supply range and provides the standard 555 timer functions in both astable and monostable configurations, combining low power consumption with substantially higher operating frequency than the classic bipolar NE555. A programmable timer is an integrated circuit that generates or measures a time interval using external resistors and capacitors. The TS555 belongs to the 555 timer family within the broader clock and timing IC hierarchy. Its internal voltage reference, comparators, discharge transistor, and flip-flop allow one device to create periodic waveforms, produce fixed-duration pulses, or measure elapsed time. The CMOS implementation retains the familiar timing architecture while reducing supply current and output-transition current spikes. Key features include a maximum timer frequency of 2.7 MHz, typical supply current of 110 µA at a 5 V supply, and operation across a 2 V to 16 V supply range. These characteristics suit battery-powered timers, low-cost automation circuits, pulse generators, debounce circuits, and general-purpose delay networks. Compared with a bipolar NE555, the CMOS TS555 provides substantially lower consumption and a much higher maximum frequency, supporting smaller timing capacitors and more compact high-frequency implementations. The TS555 uses the standard 555 timing architecture and remains pin-compatible with the familiar 8-pin NE555 footprint. Timing accuracy is maintained in astable and monostable modes, while reduced supply-current spikes during output transitions can permit smaller decoupling capacitors than a bipolar implementation. The control-voltage pin provides a means of adjusting the internal threshold reference within the device's allowed range. Typical applications include low-cost oscillators for LED blinking or clock generation, retriggerable and non-retriggerable monostable pulse circuits, transistor switching circuits, sensor debounce networks, delayed-action controls, and low-power embedded timing. In battery-operated products, its low typical supply current reduces standby burden, while the 16 V upper supply limit supports many 12 V industrial systems when voltage and dissipation conditions permit. When implementing the device, calculate the timing resistors and capacitors for the required frequency and duty cycle, and place the timing capacitor directly at the threshold and trigger pins to minimize noise pickup. Use a stable reference capacitor at the control-voltage pin and provide adequate input bypassing. Confirm that the maximum frequency, supply voltage, output-load capability, and timing tolerances suit the intended operating environment. This page combines the TS555CDT's principal electrical characteristics, package and pin information, application guidance, and pin-compatible sourcing considerations. It is intended to help engineers identify where the CMOS 555 architecture improves power consumption and frequency capability while preserving the standard timer interface.

RFQ پەیوەندی
TS555CN - 2.7MHz Low-Power CMOS Timer | STMicroelectronics
TS555CN

TS555CN - 2.7MHz Low-Power CMOS Timer | STMicroelectronics

The STMicroelectronics TS555CN is a low-power, single CMOS timer with a maximum astable frequency of 2.7 MHz, a typical supply current of 100 µA at 5 V, and an operating supply range up to 18 V, housed in an 8-pin DIP package. It provides the familiar 555 timer functions in astable and monostable configurations while offering pin-to-pin and functional compatibility with the bipolar NE555. A 555 timer is a programmable timing IC that combines a resistor, capacitor, and internal threshold comparator into a compact oscillator or one-shot pulse generator. The TS555CN belongs to the CMOS timer, oscillator, and clock-and-timing hierarchy: it can generate continuous periodic waveforms in astable mode or produce a timed output pulse in monostable mode. Its CMOS implementation is especially useful in low-power and higher-frequency circuits where lower supply current than a conventional bipolar NE555 is valuable. Key features include very low typical supply current, a maximum astable frequency of 2.7 MHz, wide operating voltage support to 18 V, high input impedance, and output compatibility with TTL, CMOS, and logic families. According to the STMicroelectronics manufacturer datasheet, typical supply current is 110 µA at 5 V and 90 µA at 3 V, with reduced current spikes during output transitions. These characteristics make the device practical for portable timing, pulse generation, debouncing, and periodic-control applications. Internally, the TS555CN uses CMOS circuitry to implement the comparator, flip-flop, discharge transistor, and timing-control functions of a standard 555 timer. In astable operation, two external resistors and one capacitor establish the oscillation period; in monostable operation, one resistor and one capacitor set the pulse width. The external timing elements determine practical accuracy, while the timer provides repeatable thresholding and state control. Typical uses include low-power delay circuits, oscillator clocks, LED flashers, pulse generators, debounce networks, and control timing in embedded equipment. The TS555CN can also replace a standard NE555 where the circuit permits CMOS supply current and operating-voltage differences. Before substitution, verify trigger-level, output-drive, timing-tolerance, and maximum-frequency requirements against the actual design. For PCB layout, keep the timing capacitor and resistor leads short, connect the decoupling capacitor close to VCC and GND, and avoid long traces around high-impedance threshold and control pins. Because the DIP package has exposed through-hole leads, mechanical spacing and soldering cleanliness should also be considered. This page combines manufacturer specifications, verified distributor information, replacement guidance, and practical design notes for engineering selection.

RFQ پەیوەندی
TS555ID - 2.7MHz Low-Power CMOS Timer | STMicroelectronics
TS555ID

TS555ID - 2.7MHz Low-Power CMOS Timer | STMicroelectronics

The STMicroelectronics TS555ID is a single CMOS 555-type timer and oscillator with a 2.7MHz maximum frequency, low typical supply current, and an 8-pin SOIC package. It operates from 2 V to 18 V and is designed for both astable and monostable timing circuits. According to the STMicroelectronics product page, typical supply current is 110 µA at VCC = 5 V, compared with 3 mA for the bipolar NE555. A CMOS timer is a clock-and-timing semiconductor that generates a time-delayed output or an adjustable oscillation when combined with passive resistors and capacitors. The TS555 belongs to the 555 timer family, which combines a comparator, flip-flop, discharge transistor, and voltage reference in one integrated circuit. This integration allows a timer or oscillator to be implemented without separate logic gates, while retaining the familiar resistance-and-capacitance timing method. The TS555ID provides a maximum astable frequency of 2.7 MHz, substantially higher than the 0.1 MHz maximum cited for the NE555 in the supplied manufacturer data. Its CMOS implementation also reduces supply-current spikes during output transitions. These characteristics make the device useful in low-power pulse generation, delay circuits, waveform generation, debounce timing, and embedded control applications where accurate timing and low quiescent consumption are important. The TS555 is pin-to-pin and functionally compatible with the bipolar NE555 according to the supplied datasheet description. Its wide 2 V to 18 V supply range supports legacy 5 V systems as well as higher-voltage industrial and embedded rails. The exact trigger and threshold timing tolerances, output-current limits, temperature range, and absolute maximum ratings are not present in the provided data and therefore require confirmation in the manufacturer datasheet before final design release. Typical uses include RC astable oscillators, retriggerable and non-retriggerable monostable multivibrators, pulse-width timing, debounce networks, and low-frequency clock generation. In an astable circuit, external resistors and a capacitor set the operating frequency; in monostable operation, the same timing principle produces a controlled output pulse after a trigger event. Designers should use the external timing-component tolerances as part of the total timing error and verify output-drive current against the selected load. Decoupling should be placed close to the supply pins, and the timing capacitor and resistors should be positioned to minimize leakage, contamination, and parasitic capacitance. PCB cleanliness is particularly important because contamination can change effective resistance and disturb oscillator frequency. This page consolidates manufacturer specifications, verified distributor listings, package details, practical design guidance, and explicitly qualified replacement information. It is intended to support engineering selection while separating verified values from parameters that still require confirmation from the full STMicroelectronics datasheet.

RFQ پەیوەندی
TS555IDT - 2.7MHz Low-Power CMOS Timer | STMicroelectronics
TS555IDT

TS555IDT - 2.7MHz Low-Power CMOS Timer | STMicroelectronics

STMicroelectronics TS555IDT is a single CMOS programmable timer IC with a maximum astable operating frequency of 2.7 MHz, a 2 V to 16 V supply range, and an 8-pin SOIC package. The device provides low-power operation, with typical supply current of 110 µA at 5 V, while supporting both monostable and astable timing configurations. A programmable timer is a timing IC that uses external resistors and capacitors to generate a delayed pulse or a periodic waveform. The TS555 belongs to the 555 timer family, which combines a voltage reference, comparators, a flip-flop, and a discharge transistor in one package. Its CMOS implementation places it within the broader semiconductor hierarchy of clock and timing ICs and programmable timer controllers. The principal advantages of the TS555IDT are its 2.7 MHz maximum frequency, low 110 µA typical supply current at 5 V, and pin-to-pin and functional compatibility with the bipolar NE555. It supports supply voltages from 2 V to 16 V and an operating temperature range of -40°C to 125°C, making it suitable for precision timing, pulse generation, delay, and oscillator circuits across industrial and consumer systems. Internally, the TS555 uses two comparators to monitor the timing voltage on the threshold and trigger nodes. A resistor-capacitor network controls these nodes, while the internal flip-flop determines the output state and the discharge transistor provides the reset interval. Accuracy remains stable in both one-shot and free-running modes, and the CMOS process also reduces supply-current spikes during output transitions. Typical applications include LED and lamp flashers, debounce timers, pulse-width modulation, missing-pulse detection, periodic interrupt generation, audio tone generation, and simple RC oscillators. Its SOIC-8 package supports conventional surface-mount assembly, while its low consumption is useful in battery-operated and low-duty-cycle equipment. When designing around the TS555IDT, maintain adequate input bypass capacitance and keep timing components close to the threshold and trigger pins. Confirm discharge-device current, output-drive capability, and duty-cycle limits against the load. Because this exact ordering code is listed as obsolete, engineers should review current STMicroelectronics timer options before committing a new production design. This page organizes the key electrical limits, package information, pin functions, cross-reference alternatives, and practical application guidance into a compact engineering reference. It also highlights the operating distinctions that matter when comparing the TS555 with other CMOS and bipolar 555 timer implementations.

RFQ پەیوەندی
TS555IN - 2.7 MHz Low-Power CMOS Timer | STMicroelectronics
TS555IN

TS555IN - 2.7 MHz Low-Power CMOS Timer | STMicroelectronics

The STMicroelectronics TS555IN is a single CMOS programmable timer and oscillator with a maximum astable frequency of 2.7 MHz, a 2 V to 16 V supply range, and an 8-pin DIP package. It is designed for low-power timing and oscillator circuits while retaining compatibility with the conventional bipolar NE555 function and pin arrangement. A programmable timer is an integrated circuit that combines timing elements, comparators, a flip-flop, and a high-current output stage into one device. The TS555IN belongs to the 555 timer family, which sits within clock and timing ICs and can operate as a monostable one-shot or an astable free-running oscillator. This integration removes the need for discrete comparator, flip-flop, and discharge-transistor networks in common delay and pulse-generation circuits. The principal advantages are low supply consumption, high operating frequency, and reduced supply-current spikes during output transitions. The cited manufacturer product page reports typical TS555 supply current of 110 uA at a 5 V supply, while a distributor specification listing reports 65 uA under its specified test conditions. The maximum astable frequency of 2.7 MHz is substantially higher than the 0.1 MHz maximum commonly associated with the bipolar NE555 in the supplied comparison data. The TS555IN supports both one-shot and free-running operation. In monostable mode, its output changes state for a controlled interval after an external trigger. In astable mode, external resistors and a capacitor establish repeated output oscillations. The 2 V to 16 V operating range permits use from low-voltage battery-powered equipment through higher-voltage industrial control circuits, subject to the component's detailed absolute maximum ratings. Typical uses include pulse generation, delayed switching, debounce and missing-pulse circuits, simple oscillators, LED flashers, industrial timing modules, and control-signal generation. Its CMOS implementation is particularly useful where standby supply current matters, while its 2.7 MHz maximum frequency supports higher-rate timing than the bipolar reference timer. Designers should preserve the standard 555 interface when making PCB substitutions and should account for the TS555's low-voltage limitations, timing tolerances, and output-drive behavior. Supply bypassing and timing-component placement should follow the manufacturer datasheet, especially in astable circuits operating near the 2.7 MHz upper frequency limit. This product page consolidates manufacturer specifications, distributor availability information, verified cross-reference results, and practical selection guidance. It also distinguishes true same-package replacements from functionally similar timer families that may require different pinouts, voltage tolerances, or application-level qualification.

RFQ پەیوەندی