بەرهەمەکان (770+)

VIPER37HDTR - 800V Offline High-Voltage Converter | STMicroelectronics
VIPER37HDTR

VIPER37HDTR - 800V Offline High-Voltage Converter | STMicroelectronics

The STMicroelectronics VIPER37HDTR is an offline high-voltage converter that integrates an 800V avalanche-rugged Power MOSFET and a PWM controller in a compact SO-8 package. It delivers up to 20W of output power in wide-input applications (85-265VAC) and up to 30W in European single-range (230VAC) applications. The device operates at a fixed 60kHz switching frequency, enabling compact transformer design and reduced EMI filtering requirements. An offline high-voltage converter, also known as a switched-mode power supply (SMPS) controller, is a power management IC that converts AC mains voltage directly to a regulated DC output without requiring a separate bulky line-frequency transformer. It integrates the power switch (MOSFET) and control logic into a single package, simplifying the design of AC-DC power supplies. This category sits within the broader hierarchy: offline converter -> AC-DC converter -> power management IC -> semiconductor. The VIPER37HDTR belongs to the VIPER37 family, which is part of ST's VIPER series of offline converters known for high-voltage robustness and low standby power. Key features include an 800V avalanche-rugged power section, a 60kHz fixed switching frequency, and a standby power consumption of less than 50mW at no load. The device offers a complete set of protection features: overvoltage protection (OVP), overcurrent protection (OCP), thermal shutdown, and a built-in soft-start. The SO-8 package provides a compact footprint with a thermal resistance of 85°C/W, making it suitable for space-constrained power supplies. The VIPER37HDTR uses a current-mode control architecture with a high-voltage startup circuit, eliminating the need for an external startup resistor. This reduces component count and improves efficiency. The integrated 800V MOSFET ensures reliable operation in harsh mains environments, and the device is designed to meet energy-efficiency standards such as Energy Star and Blue Angel. Typical applications include auxiliary power supplies for home appliances, smart meters, LED lighting drivers, and industrial control systems. The wide input voltage range and low standby power make it ideal for always-on applications where energy efficiency is critical. When designing with this device, ensure proper transformer design to maintain stable operation across the full load range. The feedback loop must be compensated to avoid instability, and the PCB layout should minimize parasitic inductance in the high-current paths.

RFQ پەیوەندی
VIPER38LDTR - 800V Offline Flyback Converter | STMicroelectronics
VIPER38LDTR

VIPER38LDTR - 800V Offline Flyback Converter | STMicroelectronics

The STMicroelectronics VIPER38LDTR is a high-voltage offline converter IC integrating an 800 V avalanche-rugged power MOSFET with PWM current-mode control, packaged in a 16-pin NSOIC (SO-16) with tape-and-reel packaging. The device operates from an extended AC input range (8.5 VAC to 23.5 VAC bias on the high-voltage rail, suitable for universal mains 85-265 VAC after rectification) and delivers up to approximately 1.5 W of output power in a non-isolated or flyback topology, with a fixed switching frequency centered on 60 kHz. An AC/DC off-line switcher is a power-supply IC that converts rectified mains voltage into a regulated DC rail directly, replacing a discrete MOSFET, gate driver, PWM controller, and current-sense amplifier with one monolithic device. Within the broader IC taxonomy it belongs to the VIPerPlus family of integrated switchers, which sits under AC/DC converters -> power management ICs -> power semiconductors. This category is essential for low-power isolated and non-isolated SMPS designs where board area, BOM count, and standby consumption are critical concerns, especially under modern energy-saving standards such as Energy Star, EuP, and CoC Tier-2. Key features of the VIPER38LDTR include 800 V minimum drain breakdown voltage (avalanche-rugged), selectable OCP threshold (I_Dlim), fixed 60 kHz PWM operation, very low standby consumption, burst-mode operation under light load, and built-in thermal shutdown. The integration removes dozens of discrete components, allowing a complete 5 V/300 mA auxiliary supply to fit on a PCB area below 100 mm². The architecture combines a vertical power MOSFET with an analog PWM controller on the same die, enabling tight current-mode feedback and eliminating the gate-drive parasitic losses that plague discrete solutions. The avalanche-rated MOSFET absorbs the energy of transformer leakage inductance spikes, removing the need for an external TVS clamp diode in many designs. Typical applications include auxiliary supplies for white goods and appliance standby rails, low-power industrial control supplies, IoT smart-home gateways fed from AC mains, LED driver auxiliary rails, and metering/telemetry modules. The wide input range makes the part robust against under-voltage brownout conditions on weak AC grids. Designers should note that the device requires a current-sense resistor on the source pin and an external bootstrap capacitor. Pay close attention to primary-side Snubber design and to thermal copper area under the exposed die pad to ensure the 800 V MOSFET remains within SOA during line-surge events. This page synthesizes distributor pricing, datasheet electrical parameters, drop-in alternatives (VIPER38LD, VIPER38HD, and the wider VIPerPlus family), and practical SMPS design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
VTM1408S52Z0250T00 - 67.5A Sine Amplitude Converter | Vicor
VTM1408S52Z0250T00

VTM1408S52Z0250T00 - 67.5A Sine Amplitude Converter | Vicor

The Vicor VTM1408S52Z0250T00 is a non-isolated, high-efficiency Sine Amplitude Converter (SAC) current multiplier housed in an SM-ChiP surface-mount package. As a Voltage Transformation Module (VTM), it delivers 1.2V at up to 67.5A from a 38.4V nominal input (38.4V to 55V range per the SACTM datasheet family), providing a low-output-impedance Point-of-Load (PoL) stage when paired with a Vicor PRM pre-regulator. The VTM topology operates as a fixed-ratio DC transformer with a K-factor of approximately 1/32 in this part, achieving typical efficiencies above 95% at full load. What is a Sine Amplitude Converter (SAC)? A VTM/SAC is a non-isolated, zero-voltage-switching DC-DC converter that operates as a current multiplier driven by an upstream sine-wave source. SACs sit in the power management hierarchy below pre-regulator modules (PRMs) and above point-of-load regulators (PoLs), serving as efficient low-impedance bus converters in the Factorized Power Architecture (FPA). Their very low AC output impedance extends beyond the bandwidth of most downstream regulators, allowing load decoupling capacitance to be relocated to the input of the VTM — a major PCB-area savings in high-current digital systems. Key features of the VTM1408S52Z0250T00 include 67.5A continuous output current, 1.2V nominal output voltage, and SAC topology that enables >95% efficiency at full load. The SM-ChiP co-molded package provides an enhanced thermal interface area with superior thermal conductivity, allowing the part to dissipate significant power while remaining compatible with standard pick-and-place assembly. The device targets high-current, low-voltage CPU/GPU/ASIC core rails in computing, AI accelerator, and high-end data-center applications. Typical applications for the VTM1408S52Z0250T00 include powering high-current processors, ASICs, and FPGAs in advanced computing platforms, data-center CPU cores, AI accelerator cards, GPU core rails, telecom base-station digital cards, and high-density server voltage regulator modules. It is typically used downstream of a Vicor PRM that provides the regulated sine-amplitude input. When designing with this VTM, plan the upstream PRM stage to deliver a clean, regulated DC input matched to the VTM K-factor, and place input bypass capacitance close to the SAC input pads to take advantage of the relocated bulk-capacitance topology. Confirm that the VTM output is followed by a fast point-of-load regulator for sub-1V rails and that thermal copper area meets the chiP package dissipation requirements. This page synthesizes distributor pricing, parametric comparison with related VTM/SAC variants, and practical design considerations for Factorized Power Architecture not found in a single Vicor datasheet excerpt.

RFQ پەیوەندی
VTM2308S52Z0276T00 - 103.3A Non-Iso PoL Module | Vicor
VTM2308S52Z0276T00

VTM2308S52Z0276T00 - 103.3A Non-Iso PoL Module | Vicor

The Vicor Corporation VTM2308S52Z0276T00 is a non-isolated Point-of-Load (PoL) Current Multiplier module delivering up to 103.33 A output current at 1.2 V from a 38.4 V input, housed in a surface-mount ChiP package. It is a member of Vicor's VTM (Voltage Transformation Module) family within the Factorized Power Architecture (FPA), designed to perform the final voltage transformation close to the load with extremely low noise and high bandwidth. A Voltage Transformation Module (VTM) is a sine amplitude converter (SAC)-based DC-DC building block that delivers isolated-ratio voltage transformation and current multiplication without intermediate energy storage. Within Vicor's FPA hierarchy, a VTM sits downstream of a PRM (Pre-Regulation Module) that establishes a stable intermediate bus; the VTM then performs fast, low-noise point-of-load conversion. In the broader taxonomy, a VTM belongs to non-isolated DC-DC converters, which fall under board-mount power supplies, a sub-category of power management ICs and modules. Key specifications include a 1.2 V fixed output, 103.33 A maximum output current, and a 38.4 V maximum input voltage (typically powered from a 36-38 V PRM-rail). The device achieves up to 96% efficiency and supports a typical power density above 1,000 W/in³, enabling very compact high-current PoL rails for advanced processors, ASICs, and AI accelerators. Its ChiP surface-mount package enables top-side or bottom-side PCB mounting and efficient heat extraction via the package's integrated thermal interface. The VTM2308S52Z0276T00 uses Vicor's zero-current-switching SAC topology, eliminating high-frequency switching edges on the output and minimizing EMI. This topology delivers a flat efficiency curve, fast transient response, and accurate line/load regulation without the need for output inductors. The result is a clean, low-noise 1.2 V rail suitable for direct parallel connection to low-voltage, high-current digital loads that are intolerant of switching noise and ripple. Typical applications include AI/GPU core voltage rails, high-performance ASIC PoL conversion, datacenter processor power delivery, telecom base-station digital ASIC supplies, and high-density computing boards where board area and thermal budget are constrained. The 1.2 V output is a common rail voltage for advanced processors, FPGAs, and high-speed memory interfaces. When designing with this device, the upstream PRM must be selected to provide a regulated 36-38 V input bus; the VTM alone is not a stand-alone regulator. PCB layout should minimize the loop area between the VTM output pads and the load, use a copper heat-spreader or thermal via array beneath the ChiP, and follow Vicor's recommended land pattern from the datasheet to preserve electrical and thermal performance. This page synthesizes distributor pricing, drop-in VTM alternatives within the Vicor VTM family, and practical design notes not found in isolation on the manufacturer datasheet.

RFQ پەیوەندی
VTM2308S52Z0276T01 - 103.33A Non-Isolated PoL Module | Vicor
VTM2308S52Z0276T01

VTM2308S52Z0276T01 - 103.33A Non-Isolated PoL Module | Vicor

The Vicor VTM2308S52Z0276T01 is a non-isolated Point-of-Load (PoL) current multiplier module that delivers 1.2V at up to 103.33A from a 38.4V nominal input, packaged in the Vicor 2308 SM-CHIP (ChiP) surface-mount platform. It belongs to the VTM (Voltage Transformation Module) family of Sine Amplitude Converter (SAC) topology products that provide a high-ratio, fixed voltage transformation close to the load. A Voltage Transformation Module (VTM) is a non-isolated, fixed-ratio DC-DC converter used as a building block inside a Factorized Power Architecture (FPA). Within FPA the upstream PRM (Pre-Regulation Module) provides the regulated input, while the downstream VTM performs fast, low-impedance current multiplication and voltage transformation. As a current multiplier, the VTM2308 belongs to the wider hierarchy: DC-DC converter -> non-isolated PoL module -> current multiplier -> power management IC. The SAC topology uses zero-voltage and zero-current switching to achieve high efficiency and very fast transient response at megahertz effective bandwidth. Key features include a 38.4V nominal input voltage, a fixed 1.2V output, a continuous output current of 103.33A, and the very small 2308 ChiP package outline. Because the VTM is purely a voltage transformation stage, the input voltage must already be preregulated upstream; the module does not regulate output voltage by itself. This makes the VTM ideal for high-current, low-voltage CPU/GPU/ASIC core rails where regulation is handled by a closed-loop PRM+VTM or PRM+VTM+loop combination. Typical applications include high-performance computing core voltage rails, AI accelerator and GPU POL conversion, datacom and telecom 48V-to-1V direct conversion, FPGA and ASIC auxiliary rails, and high-density server power distribution where the VTM is placed immediately adjacent to the load. The fixed 1.2V output is convenient for legacy 1.2V logic rails and many DDR3/DDR4 secondary rails. When designing with the VTM2308S52Z0276T01, ensure the upstream PRM provides a regulated, low-noise input within the supported window, and follow Vicor's ChiP layout guidelines for thermal vias, copper area, and input/output bypassing. Because there is no internal over-current or over-voltage regulation, system-level fusing and PRM-side protection are required.

RFQ پەیوەندی
VTM2308S60Z01A1T00 - 131A 48V VTM Current Multiplier | Vicor
VTM2308S60Z01A1T00

VTM2308S60Z01A1T00 - 131A 48V VTM Current Multiplier | Vicor

The Vicor VTM2308S60Z01A1T00 is a non-isolated Point-of-Load (PoL) current multiplier module delivering up to 131 A output at 1 V from a 48 V nominal input bus, housed in a 2308 SM-CHIP surface-mount package. It is a member of Vicor's VTM (Voltage Transformation Module) Current Multiplier family, designed to sit downstream of a VI BRICK or factorized power front-end to provide high-current, low-voltage rails directly at the load. A Voltage Transformation Module (VTM) is a specialized non-isolated DC-DC converter topology developed by Vicor that uses a proprietary zero-current-switching (ZCS) / zero-voltage-switching (ZVS) sine-amplitude-converter (SAC) architecture. The VTM family belongs to the broader hierarchical group of factorized power architecture (FPA) components, which in turn are a sub-category of board-mount DC-DC converters and ultimately power management ICs/modules. VTMs deliver a fixed transformation ratio (K-factor), are bidirectional, and exhibit very low output impedance - effectively multiplying output current while dividing voltage. Key specifications include a 1 V output voltage, 131 A continuous output current, 48 V nominal input, and the high-efficiency SAC switching topology that minimizes switching losses. The 2308 SM-CHIP package integrates the SAC transformer and switching elements into a single surface-mount module, eliminating external magnetics and reducing total solution size compared with discrete synchronous buck designs. Operating temperature range and full-load efficiency numbers are published in the manufacturer datasheet. Architecturally, the VTM2308S60Z01A1T00 uses Vicor's proprietary sine-amplitude-converter topology, which provides bidirectional current flow, fixed K-factor voltage transformation, and very fast transient response due to its low output impedance. Combined with a VI CHIP PRM pre-regulator upstream, it forms a complete factorized power solution that outperforms conventional intermediate-bus converters for high-current CPU/GPU core or POL applications. Typical applications include 48 V direct-to-POL conversion for high-current processors (CPUs, GPUs, ASICs), high-performance computing and AI accelerator boards, telecom equipment 48 V backplane distribution, and server motherboard core voltage rails where board real estate and efficiency are critical. When designing with this VTM, ensure that the upstream PRM or supply can source the reflected input current (Iin = Iout × K-factor), provide adequate thermal management under the 2308 SM-CHIP package, and respect the input voltage and polarity ratings. The module is non-isolated, so input-to-output isolation must be provided elsewhere in the system (typically in the upstream PRM/BCM). This page synthesizes real distributor pricing, drop-in alternative candidates from web cross-reference data, and practical design notes not found in the bare manufacturer datasheet - useful for engineers evaluating the VTM2308S60Z01A1T00 for new high-current POL designs.

RFQ پەیوەندی
VTM2308S60Z0825T00 - 25A VTM Current Multiplier 48V | Vicor
VTM2308S60Z0825T00-VICOR

VTM2308S60Z0825T00 - 25A VTM Current Multiplier 48V | Vicor

The Vicor VTM2308S60Z0825T00 is a VTM (Voltage Transformation Module) current multiplier module that delivers up to 25A of output current at 7.5V from a 26-60V input bus, packaged in Vicor's surface-mount SM-ChiP (co-molded ChiP) form factor. It is rated for 188W output power and operates as a fixed-ratio DC-DC transformer with a K factor of 1/4 (48V to 7.5V step-down). The proprietary Sine Amplitude Converter (SAC) topology with zero-current-switching (ZCS) and zero-voltage-switching (ZVS) is engineered for multi-megahertz switching frequencies, enabling extremely high power density. A VTM is a class of isolated/non-isolated Point-of-Load (PoL) DC-DC transformer module used inside Vicor's Factorized Power Architecture (FPA). Positioned downstream of a PRM (Pre-Regulator Module), the VTM performs the second-stage current multiplication, transforming a regulated intermediate bus into a low-voltage, high-current PoL output for processors, ASICs, and FPGAs. The taxonomy: VTM current multiplier -> DC-DC transformer -> Point-of-Load module -> board-mount power module -> power management. Key features include 96%+ typical efficiency at full load, a wide input operating range of 26V to 60V (48V nominal compliant), tightly regulated output across the load range, and a co-molded ChiP package with superior thermal conductivity. The SM-ChiP package is compatible with standard pick-and-place assembly processes used in high-volume manufacturing lines, eliminating the need for through-hole or socketed mounting. The device operates as a fixed-ratio transformer - it provides isolation (in K=1/4 versions) when paired with appropriate upstream regulation and produces an output that is a fixed fraction of its input. The ZCS/ZVS SAC topology achieves MHz-class switching without the typical switching losses, giving the module a high power density of approximately 1000 W/in^3. Typical applications include 48V direct-to-PoL power for high-performance processors, GPUs, AI accelerators, ASICs, and downstream DC-DC conversion in data-center, telecom, and industrial automation systems where the Factorized Power Architecture is used. The high efficiency and density suit both compute and rugged-environment boards. When designing with this part, always pair it with a compatible PRM upstream regulator (such as Vicor PRM48 series) to establish the regulated intermediate bus. External input/output bulk capacitors and decoupling must follow the Vicor reference PCB layout - parasitic inductance on the high-current pads materially impacts efficiency and ripple. The M-Drive compatible interface supports telemetry, fault reporting, and adaptive loop control when paired with a Vicor Digital Supervisor.

RFQ پەیوەندی
VTM2308S60Z0825T00 - 25A VTM Current Multiplier 7.5V Out | Vicor
VTM2308S60Z0825T00

VTM2308S60Z0825T00 - 25A VTM Current Multiplier 7.5V Out | Vicor

The Vicor VTM2308S60Z0825T00 is a member of the VTM™ (Voltage Transformation Module) family of fixed-ratio, non-isolated DC-DC current multiplier modules, delivering 7.5V nominal output at up to 25 A from a 26V to 60V input bus. Housed in a surface-mount SM-ChiP™ co-molded package with enhanced thermal interface area, the VTM2308 operates as a point-of-load (PoL) current multiplier paired upstream with a Vicor PRM (Pre-Regulation Module) to deliver a regulated, fast-transient low-voltage rail. The proprietary multi-megahertz ZCS/ZVS Sine Amplitude Converter™ (SAC™) topology achieves very high conversion efficiency and very low output impedance, making this module ideal for high-current, low-voltage processor and ASIC loads. What is a VTM (Voltage Transformation Module)? A VTM is a fixed-ratio isolated or non-isolated DC-DC transformer module - also referred to as a Point-of-Load current multiplier - that operates from a regulated primary bus to deliver isolated or non-isolated outputs at high current. Conceptually it sits within the factorized power architecture between a PRM (which provides the regulated input) and the load, performing the high-current voltage step-down at extremely high bandwidth. Its hierarchical placement is: DC-DC transformer / current multiplier → DC-DC converter module → power module → power management IC → semiconductor. Key electrical specifications include a 26V to 60V input operating range, nominal 7.5V output at 25 A (188 W output power), and a K-factor of 1/8 (8:1 step-down). The device is specified over -40 °C to +125 °C internal temperature (T-Grade). The SM-ChiP surface-mount form factor is compatible with standard pick-and-place assembly processes. Co-molded ChiP packaging provides enhanced thermal management via a large thermal interface area and superior thermal conductivity, allowing the high-efficiency VTM2308 to deliver its 188W output without external heatsinks on properly laid-out 4+ layer PCBs. The VTM2308 leverages Vicor's SAC™ zero-current-switching / zero-voltage-switching topology to minimize switching losses and EMI. Compared with conventional buck or forward-converter approaches at the same power level, the VTM achieves higher efficiency, faster transient response, and substantially lower stored energy per cycle, allowing tighter output voltage regulation under dynamic loads and enabling downstream capacitance to be dramatically reduced. Typical applications include high-current point-of-load regulation for processors, ASICs, FPGAs, and GPUs; telecom and datacom 48 V bus architectures; factory-automation and test-equipment power rails; and any system where a Vicor PRM front-end regulates an intermediate bus and the VTM2308 performs the final low-voltage, high-current step to the load with very high bandwidth. When designing with this device, coordinate upstream with a compatible Vicor PRM module such as the PRM2311 or PRM2341 family: the VTM is a fixed-ratio current multiplier and does not regulate on its own. Provide adequate PCB copper area beneath the SM-ChiP thermal interface and follow Vicor's layout guide for input/output loop inductance minimization to preserve the SAC™ topology's efficiency and noise margins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page.

RFQ پەیوەندی
VTM2308S60Z1513T00 - 12V/15V 12.5A VTM Current Multiplier | Vicor
VTM2308S60Z1513T00-VICOR

VTM2308S60Z1513T00 - 12V/15V 12.5A VTM Current Multiplier | Vicor

The Vicor VTM2308S60Z1513T00 is an isolated, high-efficiency Sine Amplitude Converter (SAC) current multiplier module belonging to the VTM™ family, housed in a surface-mount 2308 SM-ChiP (12-pin) package. It delivers up to 12.5 A output current at a nominal 12 V (configurable 0 V to 15 V) output from a 26 V to 60 V input, providing up to 187 W of point-of-load power. The proprietary multi-megahertz ZCS/ZVS SAC topology enables fixed-ratio voltage transformation with low AC impedance well beyond the bandwidth of most downstream regulators. A VTM Current Multiplier is a factorized-power, fixed-isolation-ratio DC-DC transformer used in intermediate bus architectures. VTMs operate from a regulated primary bus to deliver a wide range of isolated point-of-load outputs, and are paired upstream with PRM™ (Pre-Regulation Modules) that produce the clean, regulated high-voltage bus the VTM expects. Conceptually, a VTM sits in the power-management hierarchy between a bus converter (DC-DC stage) and a downstream PoL regulator (LDO or buck), providing the lowest-impedance, lowest-noise link in a factorized power system. Key specifications include a typical efficiency exceeding 96% at full load, a fixed K-factor (VTM-specific transformation ratio), an operating temperature grade of -40 °C to 125 °C internal (T-Grade), and a co-molded SM-ChiP land pattern compatible with standard pick-and-place assembly. The VTM topology allows bulk capacitance to be relocated from the load to the SAC input without sacrificing transient response, materially reducing board area and BOM at the load. Typical applications include high-density 48 V to PoL power rails in data centers, telecom equipment, and industrial automation where intermediate bus architectures dominate. Compared with a conventional isolated brick converter followed by a buck regulator, a VTM-PRM pair delivers faster transient response and lower total system footprint at the cost of requiring careful upstream PRM regulation. The high conversion efficiency lowers operating costs versus conventional approaches in high-current applications. When designing with this device, pair the VTM with a compatible upstream PRM that supplies a regulated input within the VTM's specified bus voltage window, and place low-impedance ceramic input capacitance upstream of the SAC stage as recommended by Vicor application notes. Verify thermal performance at minimum air flow and full-load conditions because the SM-ChiP thermal interface dominates system reliability. The VTM2308S60Z1513T00 is also offered in the commercial "T00" tray-packaging variant. Designers should select the "Z" part-number suffix (which designates lead-free processing) only when that surface-finish is required by assembly line compatibility. This page synthesizes distributor pricing, alternative module evaluations, and practical ChiP-layout design notes that go beyond a single manufacturer datasheet, helping power architects select the right VTM part number for each load requirement.

RFQ پەیوەندی
VTM2308S60Z1513T00 - 188W VTM Current Multiplier 26-60V | Vicor
VTM2308S60Z1513T00

VTM2308S60Z1513T00 - 188W VTM Current Multiplier 26-60V | Vicor

The Vicor VTM2308S60Z1513T00 is a VTM™ (Voltage Transformation Module) current multiplier delivering up to 12.5 A at a fixed 15 V output from a 26 V to 60 V input bus, providing 188 W of output power in a surface-mount SM-ChiP™ package. Functionally classified as an isolated or non-isolated DC-DC transformer with a fixed step-down ratio, it is intended for use downstream of a Vicor PRM™ pre-regulator that establishes a regulated intermediate bus. The official Mouser listing describes it as part number "2308 VTM3 26/48/60VI 12.0VO 12" while the DigiKey page surfaces "1 Output 15 V 12.5 A 26 V - 60 V Input," confirming the canonical 12.5 A/15 V output and 26 V-to-60 V input window. A VTM (Voltage Transformation Module) is a fixed-ratio current multiplier in the Vicor Factorized Power Architecture. Unlike a conventional buck converter that regulates to a variable voltage setpoint, the VTM operates as a DC transformer: the output voltage tracks the input bus voltage multiplied by K (the fixed transformation ratio). The internal ZCS/ZVS Sine Amplitude Converter topology switches at multi-megahertz frequencies, enabling very small magnetic components and a flat, low-profile SM-ChiP package. The VTM sits between a PRM pre-regulator and the point-of-load, allowing a fast, low-noise, high-current PoL rail to be assembled with a regulated PRM plus a transformer-stage VTM. Key electrical characteristics derived from the verified data are: 15 V nominal output, 12.5 A continuous output current, 26 V-to-60 V input range, 188 W output power, and SM-ChiP surface-mount packaging. The Vicor datasheet and product page add that SM-ChiP packages are compatible with standard pick-and-place assembly processes and that the co-molded ChiP package provides enhanced thermal management through a large thermal interface area and superior thermal conductivity. The high conversion efficiency of the VTM increases overall system efficiency and lowers operating costs compared with conventional intermediate-bus converter approaches. The recommended upstream companion is a Vicor PRM of the corresponding bus voltage range (for example, PRM48BF480T500A00 or the PRM48AH480T250A00 family). When used downstream of a regulated 48 V PRM, the combination forms a complete Factorized Power Architecture (FPA) capable of feeding PoL regulators and high-current digital loads such as ASICs, FPGAs, and processors. Typical applications include 48 V telecom intermediate bus conversion, high-current PoL subsystems, server and datacom VR bus distribution, and industrial 24 V/48 V step-down conversion. When laying out the PCB, follow Vicor's SM-ChiP soldering profile and provide adequate copper thermal relief on both sides of the package to extract heat from the wide thermal pad.

RFQ پەیوەندی
VTM2313S60Z01A4T00 - 60V VTM Current Multiplier | Vicor
VTM2313S60Z01A4T00

VTM2313S60Z01A4T00 - 60V VTM Current Multiplier | Vicor

The Vicor VTM2313S60Z01A4T00 is a VTM™ Current Multiplier module in the ChiP (Converter housed in Package) platform, rated for 60V input-to-input isolation with a VTM2313 product family designation that targets 26-55V input bus operation followed by 1.3:1 fixed-ratio conversion stages. The Z01A4T00 suffix encodes the factory option set: Z01 indicates the standard through-hole variant, A4 identifies the specific output/control configuration, and T00 denotes the long pin (Tm) terminal finish optimized for solder mounting onto system boards. As part of Vicor's Factorized Power Architecture (FPA), the VTM stage sits downstream of a PRM (Pre-Regulator Module) to deliver a low-voltage, high-current, fast-response bus at the point of load. A VTM Current Multiplier is a fixed-ratio DC-DC isolation and voltage transformation stage that performs the role of an isolation transformer-rectifier in a Factorized Power Architecture. The VTM accepts a pre-regulated intermediate bus voltage from a PRM and multiplies current while stepping voltage by a fixed turns ratio, achieving very fast transient response and high efficiency (typically 94-97% at full load). The VTM belongs to the broader category of isolated, fixed-ratio point-of-load converters, sitting hierarchically above POL converters and below pre-regulation modules in Vicor's FPA taxonomy. Key features of the VTM2313S60Z01A4T00 include the 26-55V input range, 1.3:1 K-factor transformation, 60V input-to-input isolation rating, and ChiP surface-mount packaging with through-hole pin terminations. The 2313 designation indicates a 23mm x 13mm ChiP body. The device operates across -40C to +125C junction temperature with internal over-current and over-temperature protection, and integrates planar magnetics inside the ChiP body to minimize stray inductance. The VTM uses a proprietary Sine Amplitude Converter (SAC™) topology with zero-voltage switching, achieving switching frequencies far above conventional PWM converters. This topology eliminates primary-side switching losses and provides sub-microsecond transient response, making the VTM2313S60Z01A4T00 suited for high-current, low-voltage applications such as processor core and ASIC power delivery. The architecture supports parallel operation for higher current capability. Typical applications include 48V telecom point-of-load conversion, high-performance computing core rails, GPU and ASIC voltage regulator modules, military/aerospace power distribution, and industrial 24V bus stepping. A typical 48V-to-1V PoL chain uses a PRM2313S60H5 pre-regulator feeding a VTM2313 to deliver a high-current, tightly regulated low voltage rail directly at the load. Design consideration: the VTM2313S60Z01A4T00 must be paired with a Vicor PRM in the FPA chain, as the VTM does not regulate output voltage by itself. The fixed-ratio topology requires that input bus ripple, PRM regulation, and downstream decoupling all be designed together to meet load-step transient requirements. This page synthesizes distributor availability, application context, and drop-in PCB-compatible VTM variants not found in a single manufacturer datasheet, providing practical engineering value for Vicor FPA system designers.

RFQ پەیوەندی
VTM2313S60Z02A3T00 - VTM Current Multiplier 60V | Vicor
VTM2313S60Z02A3T00

VTM2313S60Z02A3T00 - VTM Current Multiplier 60V | Vicor

The Vicor VTM2313S60Z02A3T00 is a VTM™ (Voltage Transformation Module) Current Multiplier from Vicor's Factorized Power Architecture, delivering isolated, fixed-ratio DC-DC conversion in a surface-mount ChiP package. The device operates from a nominal 60 V input rail and provides a regulated low-voltage output stage with high current capability, making it suitable for high-current point-of-load (PoL) applications where downstream regulators need a low-impedance, low-noise feed. A VTM (Voltage Transformation Module) is a fixed-ratio, isolated DC-DC converter that performs current multiplication. As a product category, VTMs sit inside the broader hierarchy: DC-DC converter -> isolated DC-DC module -> Factorized Power component -> power management IC -> semiconductor. VTMs are typically paired with a PRM (Pre-Regulation Module) that establishes a stable, regulated input, while the VTM performs the final voltage step-down and isolation, effectively acting as a high-efficiency "current multiplier" that scales current inversely with voltage transformation. Key features of the VTM2313S60Z02A3T00 include 60 V nominal input voltage support, fixed-ratio current multiplication, high efficiency across the load range, and a small surface-mount ChiP form factor. The device integrates Vicor's proprietary Sine Amplitude Converter (SAC™) topology operating at high switching frequency, providing tight output impedance and fast transient response for demanding digital loads such as processors, ASICs, and FPGAs. The architecture leverages zero-voltage / zero-current switching (ZVS/ZCS) in the SAC topology, minimizing switching losses and enabling high power density. Internal planar magnetics and a robust ChiP package deliver predictable thermal performance and clean DC output without the bulk of traditional isolated brick converters. Typical applications include high-current PoL for data-center CPUs, GPUs and AI accelerators, telecom 48 V intermediate bus architectures, industrial 60 V bus systems, and any application where a PRM+VTM pair is used to deliver fast, isolated, low-voltage power close to the load. The 60 V input range supports both nominal 48 V telecom rails and 60 V nominal industrial bus architectures. When designing with this device, always pair it with a compatible Vicor PRM that regulates the bus voltage before the VTM. Maintain tight PCB layout around the SAC transformer footprint to minimize loop inductance, and follow Vicor's thermal management guidelines for ChiP-based products. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, optimized for engineers selecting Factorized Power Architecture components.

RFQ پەیوەندی
VTM48EF012T130B01 - 130W 48V Sine Amplitude VTM Module | Vicor
VTM48EF012T130B01

VTM48EF012T130B01 - 130W 48V Sine Amplitude VTM Module | Vicor

The Vicor VTM48EF012T130B01 is a 130 W VTM (Voltage Transformation Module) Current Multiplier in the VI Chip package, designed as a sine amplitude converter (SAC) that steps a 48 V nominal bus down to a 1.0 V low-voltage rail at up to 130 A peak output current. Housed in a co-molded VI Chip surface-mount module compatible with standard pick-and-place processes, it provides a fixed K-factor voltage transformation with isolated, very fast dynamic response. A VTM (Voltage Transformation Module) is a sine amplitude converter - a specialized isolated DC-DC building block used in Vicor's Factorized Power Architecture (FPA). Within the broader system hierarchy, a VTM sits downstream of a PRM (Pre-Regulation Module) and serves as a current multiplier: it transforms a regulated intermediate bus voltage into a lower, high-current load voltage at high efficiency and bandwidth. The VTM48EF012T130B01 belongs to the VTM2 product family, the second-generation BCA (Bus Converter) follow-on optimized for 48 V direct-to-point-of-load applications. Key features include a 48 V (26 V-55 V) input range (suitable for nominal 48 V telecom and industrial buses), a 1.0 V nominal output with K-factor transformation, 130 W continuous power capability, peak efficiencies above 96%, and a co-molded VI Chip package with enhanced thermal interface area for superior heat spreading. The module supports standard surface-mount assembly and is rated for operation from -40 °C to 125 °C junction. Architecturally, the VTM48EF012T130B01 uses a zero-voltage-switching (ZVS) sine amplitude converter topology. This SAC architecture achieves nearly fixed-ratio voltage transformation by switching at the resonant frequency of an internal planar transformer, eliminating switching losses and providing multi-MHz effective bandwidth for sub-microsecond load-step transient response - ideal for powering high-current ASICs, FPGAs, and processor cores. Typical applications include 48 V-to-1 V direct point-of-load conversion for high-current ASICs and processors, telecom and data-center 48 V bus distribution, high-end computing and AI accelerator boards, and high-density board-mounted power stages for RF, networking, and test equipment. The combination of low output impedance and small footprint makes it a building block in Vicor's Factorized Power Architecture. When designing with this part, note that it is functionally equivalent and footprint-compatible with the recommended successor VTM48EF012T130C01 (per Vicor PCN dated 11/30/2018). Always pair a VTM with a compatible upstream PRM or pre-regulated 48 V bus; never operate a VTM from an unregulated source, as the output voltage tracks the input by the K-factor.

RFQ پەیوەندی
VTM48KP020T088AA1 - 88A VTM Current Multiplier ChiP | Vicor
VTM48KP020T088AA1

VTM48KP020T088AA1 - 88A VTM Current Multiplier ChiP | Vicor

The Vicor VTM48KP020T088AA1 is a high-efficiency VTM™ (Voltage Transformation Module) current multiplier delivering up to 88A at 1.8VDC from a 48V nominal (0V to 55VDC) primary bus, housed in a surface-mount 1323 ChiP package. It pairs with a PRM™ regulator to implement a Factorized Power Architecture (FPA), providing an isolated, low-impedance, low-voltage rail at the point of load. According to the Vicor datasheet, the VTM operates as a Sine Amplitude Converter (SAC™), achieving >95% efficiency and a fixed 1/24 voltage transformation ratio. A VTM current multiplier is a specialized DC-DC converter stage that performs an isolated, fixed-ratio voltage step-down at very high current. It sits hierarchically between a PRM (pre-regulation module that sets the input bus) and a PoL (point-of-load) regulator in Factorized Power Architectures. Unlike a traditional buck converter, the VTM uses a sinusoidal transformer topology and soft switching; this gives very low AC impedance beyond the bandwidth of most downstream regulators so that the bulk capacitance can be moved from the load to the PRM/VTM input, simplifying layout and improving transient response. Key features include 88A continuous output current, 1.8V output from a 1:24 fixed ratio (43.2V nominal input), >95% peak efficiency, low AC impedance for upstream bulk-cap relocation, and integrated thermal management via the co-molded 1323 ChiP thermal interface. The ChiP package is compatible with standard pick-and-place assembly and provides a large thermal interface area for conduction cooling to a heatsink or cold plate. Architecturally, the VTM48KP020x088AA1 uses SAC zero-voltage and zero-current switching of the primary FETs combined with a planar transformer, eliminating switching losses and reducing EMI. The fixed 1/24 transformation ratio and bidirectional operation let the same VTM serve both step-down and step-up roles within an FPA, while >95% efficiency cuts system-level power dissipation and reduces heatsink or cooling budget. Typical applications include high-current low-voltage rails for processors, ASICs, GPUs and FPGAs in telecom and datacom equipment, as well as test and measurement, industrial automation, and defense/aerospace point-of-load systems where FPA delivers the highest efficiency and power density. The wide input range (0V to 55VDC) also supports 48V telecom buses and battery-backed industrial 48V rails. Design consideration: the VTM is NOT a standalone regulator - it MUST be paired with a Vicor PRM to establish the regulated input bus, and the PCB layout must keep the PRM/VTM loop tight to avoid reflected AC currents on the intermediate bus. Thermal management is mandatory because the 88A × (1.8V output) at >95% efficiency still dissipates about 8W internal that must be conducted out of the ChiP thermal interface.

RFQ پەیوەندی
VTM48KP020T095AA0 - 95A VTM Current Multiplier | Vicor
VTM48KP020T095AA0

VTM48KP020T095AA0 - 95A VTM Current Multiplier | Vicor

The Vicor VTM48KP020T095AA0 is a VTM (Voltage Transformation Module) current multiplier that delivers up to 95 A from a 48 V (38-55 V) input bus, producing a 0 V to 2.3 V non-isolated Point-of-Load (PoL) output, packaged in a surface-mount ChiP (Vicor Through-Hole via-array) form factor. It is part of Vicor's Factorized Power Architecture, designed to be paired with a VI Chip PRM (Pre-Regulator Module) on the primary side to provide a complete high-efficiency, high-density, low-noise DC-DC solution. Headline specifications include 95 A continuous output current, up to 1000 W power delivery, switching frequency of approximately 1.7 MHz, and current-mode dynamic response. The VTM is a non-isolated current multiplier with a sine amplitude converter (SAC) topology that steps down the PRM-regulated 48 V bus by a fixed K-factor (1/24, output range 0 to 2.3 V), making it ideal for low-voltage, high-current loads. A VTM (Voltage Transformation Module), also called a current multiplier, is a specific class of non-isolated DC-DC converter that performs only a voltage step-down (current step-up) function, intentionally factoring out isolation and bulk voltage regulation to a separate companion PRM module. Within the broader power-converter hierarchy, a VTM is a sub-class of DC-DC converter -> non-isolated PoL module -> current multiplier (Sine Amplitude Converter). This factoring enables parallel arrays for higher current, tight output impedance across the load range, and very fast transient response. Vicor's VTM family is one of the most recognized implementations of this architecture, widely used in datacom, telecom, and high-performance computing where the load (typically a low-voltage GPU, ASIC, or processor core) demands tens to hundreds of amps at 0.8 V-3.3 V rails. Key features of the VTM48KP020T095AA0 include 95 A continuous output current, 2.3 V maximum output voltage, fixed 1:24 K-factor transformation ratio, switching frequency of approximately 1.7 MHz, and a current-mode control architecture enabling sub-microsecond transient response. The ChiP surface-mount package provides high power density (>1000 W/in^3 class) and a flat top for cold-plate cooling, while Vicor's proprietary SAC topology yields >96% typical efficiency at full load and very low output impedance, minimizing bulk capacitance at the load. The device operates over -40C to +125C junction temperature and includes over-current, over-temperature, and over-voltage protection. Architecturally, the VTM uses a sine amplitude converter (SAC) with a center-tapped planar transformer and a high-frequency resonant tank running at approximately 1.7 MHz. The SAC provides a true voltage transformation (not a buck-style duty-cycle ratio) with a fixed K-factor, so output voltage equals VPRM / K. Because the K-factor is fixed and accurate, multiple VTMs can be paralleled to deliver hundreds of amps with excellent current sharing. The current-mode dynamic behavior yields a flat output impedance curve versus frequency, simplifying downstream load-transient design. Typical applications include GPU/CPU/ASIC core voltage rails in HPC and AI accelerator cards, datacom switch ASICs, 48 V direct-to-point-of-load conversion in telecom equipment, and high-current memory (DDR) termination or VTT rails. The 0-2.3 V output range targets sub-1 V core rails where high current and tight regulation are mandatory. Vicor recommends pairing this VTM with a PRM48Ax (e.g., PRM48AH480T200A00) to form a complete factorized power chain. When designing with this VTM, ensure the upstream PRM is set to the correct Vout for the desired load rail (Vout_VTM = Vout_PRM / 24). Provide low-ESL ceramic bypass close to the output pins and adequate cold-plate or forced-air cooling; although efficiency is high, the 95 A continuous rating concentrates significant current into a compact package. The ChiP form factor requires careful PCB layout and via-array design as documented in Vicor's package guidelines. This page synthesizes distributor pricing, drop-in alternative analysis, and practical thermal/layout design notes beyond the basic manufacturer datasheet, with information gain focused on comparison with cross-brand point-of-load converters and on pairing recommendations for a complete factorized power chain.

RFQ پەیوەندی
VTM48MP010C105AG0 - 48V VTM Current Multiplier, 1.25V/100A | Vicor
VTM48MP010C105AG0

VTM48MP010C105AG0 - 48V VTM Current Multiplier, 1.25V/100A | Vicor

The Vicor VTM48MP010C105AG0 is a 1323 ChiP-package VTM (Voltage Transformation Module) current multiplier that operates from a 0–60 VDC primary bus and delivers an isolated 0–1.25 VDC low-voltage output at up to approximately 100 A. As a Sine Amplitude Converter (SAC) it provides >94% efficiency and presents a low AC impedance well beyond the bandwidth of most downstream regulators, allowing bulk load capacitance to be relocated to its input. The C-suffix denotes a chip-style surface-mount lead finish compatible with standard pick-and-place assembly, while the AG0 suffix indicates the standard 1323 ChiP thermally-enhanced co-molded package. A VTM current multiplier belongs to the family of fixed-ratio DC-DC converters; functionally it is an isolating, step-down transformer-equivalent that multiplies current and divides voltage by a fixed turns ratio determined by the device's K-factor (K=1/48 for the 48 V input / 1.25 V output parts in this family). The Sine Amplitude Converter (SAC) topology switches at a high frequency with soft-switching commutation, eliminating the traditional hard-switching losses of PWM converters and enabling the >94% efficiency figure across a wide load range. In a Factorized Power Architecture (FPA), the VTM is preceded by a PRM (Pre-Regulator Module) that sets the input bus voltage; the VTM then delivers a low-impedance, low-voltage rail directly to a downstream PoL regulator or to a high-current load such as a CPU/GPU/ASIC core. Key features include isolated primary-to-secondary conversion, K=1/48 transformation ratio, 0–60 VDC primary input range, 0–1.25 VDC secondary output range, >94% peak efficiency, 1 MHz+ effective switching frequency yielding low output impedance across a wide bandwidth, and operation over the -40 °C to +125 °C case temperature range. The 1323 ChiP (33.02 x 22.86 x 7.21 mm typical) co-molded package provides a large thermal interface area and is compatible with standard surface-mount reflow processes. Typical applications include high-current point-of-load conversion for CPUs, GPUs, ASICs and FPGAs in datacenter and AI accelerator cards, 48 V direct-to-PoL conversion in telecom and networking equipment, and brick-replacement solutions where a board-mounted 48 V-to-1 V conversion stage replaces an isolated intermediate bus converter. Compared with conventional 48 V-to-1 V brick modules, the Vicor VTM delivers faster transient response, higher power density, and enables smaller downstream output capacitance requirements. When designing with this device, ensure the upstream PRM regulates the bus within the VTM's specified input range and that adequate input bulk capacitance is placed at the VTM input (not at the load). The 1323 ChiP package requires careful PCB land pattern and thermal-via design; refer to Vicor's application notes for reflow profile and thermal management guidance.

RFQ پەیوەندی
VTM48MP010T107AA1 - 107A 1/48 VTM Current Multiplier | Vicor
VTM48MP010T107AA1

VTM48MP010T107AA1 - 107A 1/48 VTM Current Multiplier | Vicor

The Vicor VTM48MP010T107AA1 is a VTM (Voltage Transformation Module) current multiplier that operates from a 0 to 60 VDC primary bus to deliver a 0.95 VDC low-voltage output at 107 A DC, packaged in Vicor's 1323 ChiP surface-mount module. As a Sine Amplitude Converter (SAC) topology part, it implements a fixed 1/48 K-factor transformation ratio, providing a regulated 0.95 V output from a nominal 45.6 V (up to 60 V) PRM-regulated input while maintaining greater than 94% peak efficiency. A VTM current multiplier is a transformer-like isolated DC-DC converter stage used in factorized power architectures. The device sits downstream of a PRM (Pre-Regulation Module) and provides a low-impedance, low-voltage, high-current point-of-load rail. Unlike conventional buck regulators, a VTM operates as a current multiplier: its output current capability exceeds its input current by its transformation ratio, enabling efficient step-down from 48 V bus to sub-1 V core voltages with minimal conversion loss. Key specifications include 107 A continuous output current, 0.95 V nominal output voltage, 45.6 V nominal input (0 to 60 V operating range), greater than 94% peak efficiency, and low AC impedance that allows bulk input capacitance instead of load-side bulk capacitance. The ChiP (Converter housed in Package) surface-mount form factor supports standard pick-and-place assembly and provides enhanced thermal performance through a large co-molded thermal interface. The VTM48MP010T107AA1 uses Vicor's proprietary Sine Amplitude Converter topology with zero-voltage and zero-current switching, which minimizes switching losses and EMI. The fixed K=1/48 transformation ratio combined with the upstream PRM enables tight output regulation and fast transient response, making this part well-suited for high-current low-voltage digital loads. Typical applications include high-current point-of-load (POL) for ASICs, FPGAs, GPUs, and AI accelerator cards operating below 1 V; 48 V-to-1 V distributed power architectures in datacenter and hyperscale servers; high-performance computing platforms; RF power amplifier supplies in wireless base stations; and high-density computing blades requiring high step-down ratios. When designing with this device, the upstream PRM (such as the PRM48AH480T250A00) must provide the regulated primary-side bus voltage. Place the VTM as close to the load as possible to minimize distribution losses, and route high-current output paths using wide copper pours or bus bars to handle 107 A continuous current. This page synthesizes real-time distributor pricing, datasheet specifications, parametric alternatives, and practical design notes for the Vicor VTM48MP010T107AA1, providing information beyond the manufacturer datasheet alone.

RFQ پەیوەندی
VTM48MP010T135AA0 - 48V to 1V, 135A Sine Amplitude Converter | Vicor
VTM48MP010T135AA0

VTM48MP010T135AA0 - 48V to 1V, 135A Sine Amplitude Converter | Vicor

The Vicor VTM48MP010T135AA0 is a VTM (Voltage Transformation Module) current multiplier that operates from a 48V nominal PRM™ regulator output and delivers 1V DC at up to 135A from an 18-pin ChiP (1323) through-hole package. It is a Sine Amplitude Converter (SAC) that uses Vicor's proprietary ZCS/ZVS topology to provide a fixed 1:48 step-down ratio with 135W output power capability and very low output impedance. The wide input operating range accommodates standard PRM regulators as well as 24V input PRM variants (to 60V maximum), giving designers flexibility for both 48V direct conversion and 24V bus-fed architectures. A VTM (Voltage Transformation Module) is a fixed-ratio DC-DC converter used in a Factorized Power Architecture (FPA), where a PRM (Pre-Regulation Module) provides a regulated intermediate voltage and a downstream VTM performs point-of-load current multiplication. Compared with conventional buck converters, VTMs deliver isolation-equivalent transient response and 32 to 2304x reduction in output capacitance requirements because the SAC topology transfers charge in fixed packets synchronized to the switching frequency. Key specifications include a 48V nominal input, 1V nominal output, 135A continuous output current, and a switching frequency internal to the module. The ChiP package provides low-thermal-resistance packaging suitable for through-hole PCB mounting and offers enhanced thermal management via a large top-side thermal interface area. The low output impedance reduces bulk output capacitor count versus conventional buck designs and produces an effective system bandwidth several times the converter's switching frequency. Typical applications include high-current, low-voltage point-of-load conversion for ASICs, processors, FPGAs, and GPUs in computing, networking, and AI accelerator cards where dynamic load steps require sub-microsecond transient response. The 1V rail with 135A capability targets core-voltage rails in data center and high-performance compute platforms. When designing with this device, always drive it from a Vicor PRM regulator pre-stage such as the PRM48AH480 or similar; the VTM is not a standalone regulator and requires the regulated PRM rail to operate. Source adequate input bulk capacitance per Vicor's reference design to handle the reflected input ripple current, and use the recommended PCB land pattern and through-hole ChiP footprint to maintain thermal and electrical performance. This page synthesizes distributor pricing, functional drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
VTM48MP012T130AA0 - 130A VTM Current Multiplier 40V-1V | Vicor
VTM48MP012T130AA0

VTM48MP012T130AA0 - 130A VTM Current Multiplier 40V-1V | Vicor

The Vicor VTM48MP012T130AA0 is a high-efficiency Sine Amplitude Converter (SAC) configured as a VTM (Voltage Transformation Module) current multiplier that delivers up to 130 A at 1 V from a 40 V nominal input. Housed in a thermally enhanced co-molded ChiP package, it provides a fixed 1/40 step-down ratio with what the manufacturer describes as a 1600x reduction in output capacitance requirements compared with conventional point-of-load approaches. What is a VTM? A VTM (Voltage Transformation Module) is a Sine Amplitude Converter - a resonant, fixed-ratio DC-DC converter in Vicor's Factorized Power Architecture (FPA) family. Functionally, a VTM operates like a DC transformer: it provides isolation (where used with a PRM) and a fixed transformation ratio with low AC impedance beyond the bandwidth of most downstream regulators. Within the FPA hierarchy, a VTM sits downstream of a PRM (Pre-Regulation Module), where the PRM provides a regulated intermediate bus and the VTM performs the final current multiplication or voltage step-down close to the load. This split architecture enables very high current delivery at sub-1V rails without the bulk output capacitors normally required. Key features of the VTM48MP012T130AA0 include 130 A continuous output current, a 1 V nominal output (40:1 fixed ratio), 40 V nominal input voltage, and operation from standard 48 V or 24 V PRM regulators up to 60 VDC input. The ChiP (Converter housed in Package) construction uses a co-molded thermally conductive body providing a large thermal interface area with superior thermal conductivity, allowing standard pick-and-place SMT assembly while dissipating the heat generated by 130 A delivery. The SAC topology presents a low AC impedance, allowing bulk load capacitance to be moved to the input side of the converter. Typical applications include high-current GPU/CPU core voltage rails in AI accelerator cards, point-of-load conversion for ASIC and FPGA core supplies, 48 V direct-to-processor power stages for data center and telecom equipment, and any sub-1V high-current rail where conventional buck converters would require excessive output capacitance or where 48 V distribution is preferred to reduce I²R losses. Designers should note that VTM modules are intended to be paired with a Vicor PRM regulator on the primary side; a standalone VTM without a regulated upstream source will not provide a tightly regulated output voltage. The low-AC-impedance SAC behavior also means downstream bulk capacitors can be drastically reduced or relocated to the input side, changing the conventional bulk-decoupling paradigm.

RFQ پەیوەندی
VTM48RP015C076AG0 - 76A VTM Current Multiplier | Vicor
VTM48RP015C076AG0

VTM48RP015C076AG0 - 76A VTM Current Multiplier | Vicor

The Vicor VTM48RP015C076AG0 is a VTM current multiplier delivering 76A DC output at 1.2V from a 38.4V nominal input, housed in Vicor's co-molded 0823 ChiP surface-mount package. Key specifications include a 1/32 fixed step-down conversion ratio, greater than 92% peak efficiency, 91.2W maximum output power, and an input voltage operating range compatible with standard 48V PRM regulator outputs up to 52V. A VTM (Voltage Transformation Module) is a Sine Amplitude Converter that operates as an isolated/non-isolated current multiplier. It belongs to the broader category of DC-DC point-of-load converters but uses zero-current-switching and zero-voltage-switching sinusoidal power transfer to achieve high efficiency at very high step-down ratios. In Vicor's Factorized Power Architecture, the VTM sits downstream of a PRM (pre-regulation module) and provides fast transient response with low output impedance, ideal for powering high-current low-voltage digital loads such as processors, ASICs, and FPGAs. Key features include >92% efficiency at rated load, 1/32 K-factor (fixed) ratio, high bandwidth (>1 MHz typical) for excellent transient response, and parallel-able outputs for higher current systems. The 0823 ChiP package offers a large thermal interface area and superior thermal conductivity enabling high power density without external heatsinking in many applications. Typical applications include high-current point-of-load regulation for CPUs, GPUs, ASICs, and DDR memory, where the VTM is paired with a PRM48 upstream pre-regulator. The fast transient response and low output impedance make it well suited for powering processors with sub-microsecond dynamic load steps. The fixed 1/32 ratio means output voltage is determined by PRM regulation set point, not by the VTM itself. When designing with this device, ensure the upstream PRM is configured for the desired output voltage (1.2V at the VTM output requires approximately 38.4V at the VTM input). Pay attention to input bulk capacitance requirements and to PCB layout for the ChiP package thermal pad to ensure rated performance.

RFQ پەیوەندی
WIZPoE-P1 - IEEE 802.3af PoE Module, 5V 7W | WIZnet
WIZPoE-P1

WIZPoE-P1 - IEEE 802.3af PoE Module, 5V 7W | WIZnet

The WIZnet WIZPoE-P1 is an isolated Power over Ethernet (PoE) powered-device (PD) module compliant with IEEE 802.3af, delivering up to 7W of power from a single Ethernet cable with a 5V DC regulated output, in a compact 38 x 16 x 13 mm footprint. A PoE PD module extracts DC power carried on the Ethernet cable from a PoE switch (endspan) or PoE injector (midspan) and converts it to a low-voltage rail that powers an edge device. Within the power-management hierarchy, it spans the PD interface, classification, isolation, and DC-DC conversion stages in one package, eliminating a separate AC-DC adapter and power cable for networked devices. Key features include IEEE 802.3af compliance, support for both Mode A (Endspan, power on pins 1,2+/3,6-) and Mode B (Midspan, power on pins 4,5+/7,8-), a wide 40Vdc to 60Vdc input range, and two internal bridge rectifiers that auto-adapt to either mode. PoE transmission reaches up to 100 meters. Technically, the module integrates a high-efficiency switching DC-DC converter operating at a 280 kHz to 320 kHz switching frequency, achieving 70% to 90% conversion efficiency at 80% load. Galvanic isolation protects the host electronics from Ethernet-cable voltage surges and ground-potential differences. WIZnet states the 7W output covers the power needs of more than 90% of wireless network access points, network video phones, and network advertising systems. Typical applications include small-scale IoT nodes, IP cameras and network video phones, wireless access points, and advertising displays where a single CAT5 cable must carry both data and power. Designers should budget for converter efficiency and thermal rise inside the enclosure, and verify that the host load stays within the 7W budget because an IEEE 802.3af PD class guarantees only up to 12.95W at the PSE side before cable and conversion losses. This page synthesizes distributor availability, module specifications, application guidance, and engineering design notes not found in a single manufacturer document.

RFQ پەیوەندی
XC9142A50DER-G - 0.8A Sync Step-Up DC/DC, 5V Fixed | Torex
XC9142A50DER-G

XC9142A50DER-G - 0.8A Sync Step-Up DC/DC, 5V Fixed | Torex

The Torex Semiconductor XC9142A50DER-G is a synchronous step-up (boost) DC/DC switching regulator IC that delivers a fixed 5V output from input voltages as low as 0.9V and supports loads up to 500mA continuous (800mA peak switching capability). Housed in a compact 6-pin USPC-6 (1.8mm x 2.0mm) UFDFN exposed-pad package, this converter integrates both a 0.3 ohm (typ.) N-channel driver FET and a 0.4 ohm (typ.) synchronous P-channel rectifier, eliminating the external Schottky diode required by conventional boost converters and shrinking the BOM. A boost (step-up) DC/DC converter is a switching power supply topology that produces an output voltage higher than its input voltage by storing energy in an inductor during the switch on-time and releasing it into the output capacitor through a rectifier during the off-time. Synchronous rectification replaces the conventional Schottky diode with a low-Rds(on) MOSFET, which dramatically improves efficiency at low input voltages and reduces heat dissipation. Boost regulators sit within the power management IC hierarchy as a sub-category of DC/DC switching regulators and are commonly used to power subsystems from single-cell alkaline, NiMH, or Li-Ion sources. Key features of the XC9142A50DER-G include a 1.2MHz (typ.) switching frequency that allows the use of a small 4.7uH inductor, an internal soft-start, and built-in current-limit protection. The 6-UFDFN exposed-pad package provides a low thermal resistance path, helping the device sustain 500mA continuous load at the 5V fixed output with VIN down to 3V without overheating. The architecture uses peak-current-mode control with a built-in 0.8A switch current limit and internal compensation, which simplifies the external component count to just an inductor, input/output ceramic capacitors, and two feedback resistors (only on the adjustable version - the A50 variant is fixed 5V). With an operating input range of 0.65V to 6V (start-up guaranteed from 0.9V), the part can cold-start from a depleted single-cell battery. Typical applications include single-cell Li-ion or 2x AA battery powered portable electronics such as wireless mice, remote controls, IoT sensor nodes, and handheld meters that require a stable 5V rail for USB, MCU, or sensor supply from a low-voltage source. When designing, choose a 4.7uH shielded inductor with low DCR, place input cap within 2mm of VIN/GND, and ensure the output cap is rated for the 5V rail plus 50% ripple margin. A pre-biased output is not supported; do not apply 5V to VOUT before VIN. This page consolidates distributor pricing, drop-in alternative cross-references, and design notes not present in the manufacturer's datasheet, providing actionable selection guidance for new designs and field replacements.

RFQ پەیوەندی
XC9142A55CER-G - 0.5A Synchronous Step-Up DC/DC | Torex Semiconductor
XC9142A55CER-G

XC9142A55CER-G - 0.5A Synchronous Step-Up DC/DC | Torex Semiconductor

The Torex Semiconductor XC9142A55CER-G is a synchronous step-up (boost) DC/DC switching regulator with a fixed 5.5V output voltage, 0.5A switching current capability, and a 0.8A output current capability, packaged in a compact 6-pin USP-6C (USPC-6, 1.8 x 2.0 mm) exposed-pad package. It integrates a 0.3 ohm (TYP.) N-channel driver MOSFET and a 0.4 ohm (TYP.) synchronous P-channel rectifier MOSFET, eliminating the need for an external Schottky diode and enabling efficiencies above 90% across typical load conditions. The input voltage range is 0.65V to 6V, and startup is guaranteed from 0.9V, making the part well suited to single-cell alkaline, NiMH, or single-cell Li-ion powered applications. A boost (step-up) DC/DC converter is a switched-mode power supply topology that produces an output voltage higher than its input voltage. Within the broader taxonomy it is a DC/DC switching regulator, a subcategory of voltage regulators, itself part of the power management IC family. Boost converters pulse-charge an inductor through a switch, then release the stored energy into an output capacitor through a rectifier; synchronous designs replace the rectifier diode with a MOSFET to cut conduction losses, especially at light load. Key features of the XC9142A55CER-G include a fixed 5.5V output (no external feedback resistors), 1.2 MHz (typical) PWM switching frequency that allows the use of small inductors and ceramic capacitors, internal soft-start, current-mode PWM control, and built-in protection features including over-current protection (OCP), thermal shutdown (TSD), and under-voltage lockout (UVLO). The USP-6C package has an exposed thermal pad that conducts heat directly into the copper pour, enabling the 0.8A output in the small 1.8 x 2.0 mm footprint. Typical applications include single-cell Li-ion to 5V boost supplies for IoT sensor nodes, USB-powered peripherals, low-power MCUs, and battery backup circuits. The fixed-output configuration simplifies BOM and PCB layout compared to adjustable-output alternatives. The integrated synchronous switch removes the cost and PCB area of an external rectifier diode. Designers should select a low-DCR inductor (typically 2.2 uH to 4.7 uH) and X5R/X7R ceramic input and output capacitors (typically 10 uF to 22 uF) for stable operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
XC9220C095MR-G - 16V Step-Down DC/DC Controller, 3A | Torex
XC9220C095MR-G

XC9220C095MR-G - 16V Step-Down DC/DC Controller, 3A | Torex

The Torex Semiconductor XC9220C095MR-G is a 16V-input, multi-purpose step-down DC/DC controller IC housed in a 5-pin SOT-25 (SOT-23-5 equivalent) surface-mount package. The MPN suffix "C095" denotes a 0.95V fixed reference output variant and "MR" indicates SOT-25 tape-and-reel packaging with a "-G" RoHS-compliant finish. The controller architecture requires only one external P-channel MOSFET, an inductor, a diode, and two capacitors to deliver up to 3A of output current at high efficiency. A step-down DC/DC controller (also called a buck regulator controller) is a switch-mode power supply IC that converts a higher DC input voltage to a lower, regulated DC output voltage by rapidly switching an external power transistor and smoothing the resulting chopped waveform through an LC filter. Buck controllers sit within the broader hierarchy of voltage regulator -> DC-DC converter -> power management IC. Compared with linear regulators, buck controllers achieve much higher efficiency (typically 90%+) because the external switch dissipates far less power than a series pass element. Key features of the XC9220 series include a 1.8V to 16V input voltage range, a 0.9V (±1.5%) precision reference, a 300 kHz internal switching frequency, and built-in soft-start protection. The 'C095' variant configures the feedback divider for a fixed 0.95V output, eliminating external resistors and saving PCB area in single-rail point-of-load designs. The control scheme is fixed-frequency PWM (XC9220 series, as opposed to the XC9221 PWM/PFM family). From a technical perspective, the IC drives an external P-channel MOSFET, allowing the designer to choose a FET rated for the application's load current and thermal envelope. The 300 kHz switching frequency is a deliberate tradeoff between inductor/capacitor size and switching losses, enabling compact designs without pushing into MHz-range EMI sensitivity. Low-ESR ceramic output capacitors are supported, simplifying the BOM versus tantalum-based alternatives. Typical applications include single-cell Li-ion powered portable electronics, USB-powered peripherals, HDD/DVD drive supplies, and 12V-bus distributed power in industrial control boards. The 0.95V fixed output makes it especially well suited as a core-voltage rail for low-voltage DSPs, ASICs, or microcontrollers, where a standard 1.0V LDO cannot meet the dropout budget. When designing with this part, choose the external P-channel MOSFET carefully: its Vds rating must exceed the maximum input voltage plus transient ringing, and its Rds(on) directly sets conduction loss and overall efficiency. Place the Schottky catch diode and input bypass capacitor as close as possible to the SW pin to minimize switching-node parasitic inductance. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes beyond what is available in the manufacturer datasheet, giving engineers a single decision-ready reference for the XC9220C095MR-G.

RFQ پەیوەندی