FPGA & CPLD
بەرهەمەکان (8,400+)
A3P125-1VQG100I - ProASIC3 FPGA 125K Gates | Microchip
The Microchip Technology A3P125-1VQG100I is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) with 125,000 system gates, 71 user I/Os, and 36,864 bits of RAM, housed in a 100-pin TQFP (VQG100) package. It operates from a 1.5V core supply and delivers system performance up to 231 MHz, making it a low-cost, low-power, single-chip solution for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without costly mask revisions. The ProASIC3 family uses nonvolatile flash technology, which means the configuration is stored on-chip and the device is 'Instant On' - it becomes active immediately upon power-up, without needing an external boot memory. This places the A3P125-1VQG100I in the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. Key features of the A3P125-1VQG100I include 125K system gates, 71 user I/Os, 36,864 bits of RAM, and support for up to 231 MHz system performance. It is based on 130nm CMOS flash technology, offering low power consumption and high security with flash-based lock technology. The device supports multiple I/O standards including LVCMOS, LVTTL, and PCI, and includes PLLs for clock management. Its reprogrammability and single-chip nature reduce total cost of ownership (TOC) compared to SRAM-based FPGAs that require external configuration memory. Technically, the A3P125-1VQG100I integrates a flash-based switch matrix that is programmed via the IEEE 1149.1 (JTAG) interface. It features 3,072 logic tiles (1.5K logic elements), 36,864 bits of RAM, and one PLL. The device operates from a 1.5V core voltage with 3.3V I/O compatibility, and is available in industrial temperature grade (-40°C to +100°C). The 100-pin TQFP package has a 14x14 mm body with 0.5 mm pitch, making it suitable for space-constrained designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. Its low power and instant-on capability make it ideal for battery-powered and safety-critical systems. The 71 I/Os allow flexible interfacing with sensors, memory, and microcontrollers. When designing with this device, ensure proper decoupling of the 1.5V core supply and 3.3V I/O supply. Use the JTAG interface for programming and configuration. The flash-based architecture eliminates the need for external configuration memory, simplifying the BOM and reducing board space. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P125-1VQG100I.
A3P125-1VQG100T - 125K Gate ProASIC3 FPGA 272MHz | Microchip
The Microchip A3P125-1VQG100T is a ProASIC3 family flash-based FPGA with 125,000 equivalent gates (3,072 logic elements/CLBs), 71 user I/Os, and a system operating frequency of up to 272 MHz, housed in a 100-pin thin quad flat pack (TQFP/VQFP-100) package with 0.5 mm lead pitch and 14 x 14 mm body size. Manufactured on a 130 nm CMOS flash process with a 1.5 V core supply, it is a nonvolatile, single-chip, Instant-On programmable logic solution. A flash-based FPGA is a field programmable gate array whose configuration is stored in on-chip nonvolatile flash memory cells rather than SRAM. This places the ProASIC3 family in the broader hierarchy of programmable logic devices: FPGA -> programmable logic IC -> semiconductor. Unlike SRAM FPGAs, a flash FPGA requires no external configuration PROM, boots instantly at power-up, and offers inherently higher configuration security against cloning. Key features include reprogrammable nonvolatile flash fabric, single-chip operation with no boot-time configuration, small-footprint TQFP packaging for space-constrained designs, and low total cost of ownership. The ProASIC3 architecture provides abundant advanced features while delivering ASIC-level unit cost at low-to-mid volumes. Technically, the device uses Microchip (formerly Actel/Microsemi) 130 nm flash switch technology, combining the reprogrammability of SRAM FPGAs with the security and instant-on behavior of antifuse devices. The fabric supports system-level performance suitable for glue logic replacement, control-plane functions, and interface bridging. Typical applications include automotive subsystems, industrial control, portable instrumentation, and communication interface bridging where a single-chip, secure, low-density FPGA is required. Design consideration: verify I/O bank voltage compatibility with adjacent rail standards (e.g., 3.3 V LVCMOS) and confirm availability, as ProASIC3 low-density members are aging; plan a second-source or migration path early. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3P125-2PQ208 - 125K-Gate Flash FPGA | Microchip Technology
The Microchip Technology A3P125-2PQ208 is a flash-based ProASIC3 field-programmable gate array with 125,000 system gates, 3,072 logic cells, up to 144 kbits of true dual-port SRAM, and 133 user I/Os in a 208-lead BFQFP package. The device is manufactured using a 130 nm CMOS process with seven metal layers, including six copper layers, and combines reconfigurable digital logic with optional embedded ARM support. A field-programmable gate array is a programmable digital semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one device. Within the broader semiconductor hierarchy, an FPGA belongs to programmable logic devices and provides an alternative to application-specific integrated circuits when design revisions, field updates, or moderate logic density are required. The A3P125 family offers low-density-to-medium-density programmable logic with relatively low total cost of ownership. The A3P125-2PQ208 provides 125,000 system gates and 3,072 logic cells, with the device listing 133 user I/Os. Its memory resources include up to 144 kbits of true dual-port SRAM, allowing independent simultaneous access for selected data paths. Flash-based configuration permits the programmed configuration to remain in the device without continuous external memory support. The -2 ordering suffix distinguishes this speed-grade variant from other A3P125 options. The 208-BFQFP package measures 28 x 28 mm, has a 0.50 mm pin pitch, and is approximately 3.40 mm high. The underlying 130 nm CMOS implementation belongs to the ProASIC3 generation and is designed for applications requiring programmable logic, parallel interfaces, control functions, communications glue logic, and optional soft-processor capability. Exact operating voltages, I/O standards, configuration interfaces, and speed ratings are not stated in the retrieved product records and should be confirmed in the manufacturer documentation before design release. Typical uses include industrial controller logic, communications interfaces, instrumentation, embedded control, and FPGA-assisted system integration. The 208-pin package provides a large pin count for parallel external interfaces, while the 133 user I/Os give designers substantially more attachment flexibility than small-package programmable logic devices. Optional ARM support can help consolidate supervisory and communication routines when the selected device configuration and software toolchain support that feature. PCB design should treat the 208-lead BFQFP as a fine-pitch component and prioritize clean power distribution, ground-plane continuity, and controlled routing around every bank. Designers should verify the exact bank voltage, supported I/O standards, configuration pins, and decoupling requirements in the ProASIC3 family documentation. The -2 suffix must also be retained during BOM control to avoid unintended speed-grade substitution. This product page combines the exact package and resource details, practical implementation guidance, structured alternatives, and design trade-offs needed to assess the A3P125-2PQ208. It also distinguishes genuine same-footprint options from devices with smaller packages or different resource counts, helping engineers make package-aware sourcing decisions without assuming that every A3P125 variant is interchangeable.
A3P125-2PQG208 - ProASIC3 Flash FPGA 1.5KLE 208-PQFP | Microchip
The Microchip Technology (formerly Microsemi/Actel) A3P125-2PQG208 is a ProASIC3 family flash-based FPGA with 125,000 system gates, 1.5K logic elements (LEs), 133 user I/Os, and 36,864 bits of embedded memory, housed in a 208-pin PQFP (BFQFP) package measuring 28x28 mm and operating from a 1.5V core supply at system performance up to 310 MHz in speed grade -2. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory cells rather than an external configuration ROM. Within the programmable logic hierarchy, an FPGA sits above CPLDs in gate count and capability, and the ProASIC3 family is positioned for ultra-low-density, single-chip solutions where reprogrammability, instant-on startup, and low total cost of ownership (TOC) matter more than raw fabric size. Key differentiating features include single-chip operation with no external boot device, live-at-power-up behavior that eliminates configuration time, reprogrammability in-system, and small-footprint package options. The -2 speed grade supports system clock rates up to 310 MHz, adequate for glue logic, bus bridging, control-state machines, and moderate datapath functions. Architecturally, ProASIC3 is built on a 130 nm flash process with a Sea-of-Tiles fabric of versatile logic elements, each containing a lookup-table-based core with register capability. The flash switching technology is inherently nonvolatile and low-power at standby, and the fabric supports single-ended and differential I/O standards on its 133 available user pins. Typical applications include industrial control and automation, portable and handheld instrumentation, communications line-card glue logic, and military/aerospace subsystems where instant-on and configuration-store reliability are required. The 1.5V core with 3.3V-tolerant I/O banks fits standard board power trees. Design consideration: budget the 208-pin PQFP footprint carefully - at 28x28 mm with 0.5 mm pin pitch, thermal relief and fanout escape routing on 4+ layer PCBs should be planned early. This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
A3P125-2PQG208I - ProASIC3 Flash FPGA 1.5KLE | Microchip
The Microchip Technology (formerly Microsemi) A3P125-2PQG208I is a ProASIC3 family flash-based FPGA providing 1,500 logic elements (125K gates), up to 133 user I/Os, and a maximum system performance of 310 MHz, fabricated on a 130 nm flash process with a 1.5V core supply in a 208-pin PQFP (BFQFP) package for industrial temperature ranges. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip nonvolatile flash memory rather than an external configuration device. Within the programmable logic hierarchy, FPGAs sit above CPLDs and simple programmable logic devices, and the ProASIC3 family targets low-density, single-chip, instant-on designs that historically would have used ASICs or CPLDs. Key differentiating features include single-chip operation with no external boot PROM, because the flash fabric is inherently nonvolatile and Instant On at power-up; reprogrammability that supports in-field design updates; low total cost of ownership (TOC) versus masked ASICs; and live-at-power-up security that resists design theft compared with SRAM FPGAs that must load bitstreams externally. Architecturally, the A3P125 uses a sea-of-vanilla-modules fabric of versatile logic elements on a 130 nm CMOS flash process, with embedded memory blocks and flexible I/O standards. The -2 speed grade balances timing performance against power, and the industrial temperature rating (-40C to +100C junction) suits harsh deployments. Typical applications include industrial control and automation, secure single-chip glue logic and bridge functions, avionics and defense subsystems, and portable instrumentation where low power and instant-on operation matter. Design consideration: budget the 1.5V core rail and I/O bank supplies carefully, and confirm I/O standard assignments per bank before routing, since bank voltage rules constrain pin placement in the 208-pin QFP. This page synthesizes distributor availability, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
A3P125-2TQ144 - 36Kb ProASIC3 FPGA, 100 I/O | Microchip
Microchip Technology A3P125-2TQ144 is a ProASIC3 Flash field-programmable gate array with 36,864 logic cells, 100 user I/O, and a speed grade of 2, supplied in a 144-pin TQFP package. The device is a reprogrammable digital semiconductor that combines configurable logic, embedded block RAM, programmable I/O, and on-chip configuration resources in one low-density FPGA package. An FPGA is a programmable logic device within the broader semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows its interconnect and logic fabric to be configured after manufacture. The A3P125 belongs to the ProASIC3 Flash family, whose nonvolatile configuration memory supports field reprogramming without requiring a separate external configuration PROM. The A3P125 device provides 36,864 logic cells, 36 Kb of block RAM, and 100 I/O in the 144-pin TQFP package. Its speed-grade designation is -2, while the TQ144 suffix identifies the 144-lead package. The package occupies a 20 mm by 20 mm footprint and is intended for surface-mount PCB assembly. A separate industrial-temperature ordering code, A3P125-2TQG144I, is also available in the same 144-pin package for applications requiring an extended commercial-temperature qualification. This ProASIC3 architecture is useful for control logic, bus interfacing, protocol bridging, data acquisition, and compact embedded systems that benefit from field-reprogrammable hardware. Its 100 I/O provide more external connections than lower-density members of the family, while the 36 Kb of RAM can support buffers, packet storage, and state-machine data. Configuration is retained in on-chip Flash memory, simplifying system updates after the board has been manufactured. Typical applications include industrial automation, communications adapters, instrumentation, embedded control, and signal-processing front ends. Engineers can use the same A3P125 silicon platform across prototype and production systems because Flash configuration permits design updates without changing the PCB. The A3P125-2TQ144 is therefore particularly suitable when moderate logic density, a large I/O count, and nonvolatile reconfiguration are more important than very high FPGA performance. PCB implementation requires careful attention to the TQFP-144 footprint, pin-1 orientation, configuration pins, power rails, and decoupling. Follow the manufacturer pin-description table and board-design file when assigning tracks and plane connections. Treat the device as a configurable digital IC rather than a power semiconductor, so an SOA curve is not applicable. Programming support and bitstream compatibility should be checked against the selected ProASIC3 toolchain before committing the design to production. This page consolidates the exact A3P125-2TQ144 ordering information, package characteristics, replacement options, and application-specific design guidance into one engineering reference. It also identifies where sourcing requests should be submitted without embedding temporary commercial terms into the technical documentation.
A3P125-2TQG144 - ProASIC3 Flash FPGA 1.5KLE TQFP-144 | Microchip
The Microchip Technology (Microsemi) A3P125-2TQG144 is a ProASIC3 flash-based FPGA with 125,000 system gates, approximately 1,500 logic elements (LEs), 36,864 bits of embedded RAM, up to 100 user I/Os, and a system performance of 310 MHz, fabricated on a 130nm process and housed in a 144-pin TQFP package operating from a 1.5V core supply. A flash-based FPGA is a field-programmable gate array whose configuration data is stored in on-chip flash memory rather than an external configuration device or volatile SRAM. In the programmable-logic hierarchy, it sits between low-density CPLDs and high-end SRAM FPGAs, offering single-chip, nonvolatile, instant-on operation that simplifies power sequencing and removes the need for a boot flash, making it a power management and board-space friendly alternative to SRAM FPGA solutions. Key features include live-at-power-up nonvolatile flash programming, reprogrammability for in-field updates, low total cost of ownership through a single-chip solution, and a -2 speed grade suited to mid-speed logic, glue logic, bus bridging, and control applications. The 144-pin TQFP (20x20 mm) surface-mount package offers hand-solderable lead pitches for prototyping and avoids the complexity of ball-grid-array inspection. Architecturally, ProASIC3 uses a fine-grained VersaTile logic fabric in which each tile can act as a look-up table, a D flip-flop, or memory, combined with embedded flash blocks providing the 36,864 bits of distributed and FIFO-capable RAM. The 1.5V core with 3.3V-capable I/O banks integrates easily into legacy 3.3V systems. Typical applications include industrial control and automation, communications bridging, aerospace and defense porosable logic, medical instrumentation glue logic, and embedded system controller integration where instant-on and configuration security matter. Design consideration: verify I/O bank voltage assignment in Libero SoC before layout, since TQFP-144 pinout flexibility is limited compared to larger packages. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
A3P125-2TQG144I - ProASIC3 FPGA 125K Gates | Microchip
The Microchip Technology A3P125-2TQG144I is a 125,000-gate ProASIC3 flash-based FPGA with 3072 configurable logic blocks, up to 100 user I/Os, a 1.5V core supply (1.425V to 1.575V range), and a system speed grade of up to 310 MHz, housed in a 144-pin TQFP (TQG144) package rated for -40C to +85C industrial operation. A field-programmable gate array (FPGA) is a semiconductor device containing an array of programmable logic blocks and reconfigurable interconnects that designers configure after manufacturing. Unlike SRAM-based FPGAs, flash-based devices such as the ProASIC3 family retain their configuration in non-volatile flash cells, so they power up instantly, need no external configuration PROM, and offer higher single-event-upset immunity - placing this device in the hierarchy: FPGA -> programmable logic device -> digital integrated circuit -> semiconductor. Key features include non-volatile flash programming for true single-chip operation, reprogrammability with no external boot memory, low total cost of ownership as promoted on the Microchip product page, a 130nm CMOS process, and industrial temperature qualification (-40C to +85C) making it suitable for harsh environments. The -2 speed grade balances performance and cost within the A3P125 family. Architecturally, the A3P125 implements 125K system gates across 3072 VersaTile logic modules on a 130nm flash-based fabric. On-chip RAM totals 36,864 bits distributed as variable-aspect-ratio blocks, and I/O banks support multiple single-ended and differential standards at 1.5V core supply with 0.5mm package pitch. Typical applications include industrial control and automation, Internet of Things (IoT) gateways, military/aerospace control logic, and glue-logic consolidation in embedded systems where single-chip, instant-on programmable logic reduces BOM count. When designing with the A3P125-2TQG144I, use Microchip Libero SoC tools for synthesis and place-and-route, and budget I/O banks carefully since only 100 of the 144 pins are user I/O. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
A3P125-FG144 - 125K Gate ProASIC3 FPGA | Microchip Technology
Microchip Technology A3P125-FG144 is a ProASIC3 field-programmable gate array with 125,000 equivalent gates, 3,072 logic cells, 97 I/O, and a 231 MHz maximum operating frequency. The device uses 130 nm CMOS technology, supports a 1.5 V core voltage for 1.5 V-only systems, and is offered in a 144-pin plastic ball grid array package. It is identified as an automotive ProASIC3 Flash FPGA, making it suitable for embedded control, automotive electronics, industrial automation, and compact programmable-logic systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured by the end user rather than permanently defined during wafer fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, embedded memory, and I/O resources. ProASIC3 devices use nonvolatile Flash configuration memory, allowing the programmed logic to remain in the device without continuous external reconfiguration. The A3P125-FG144 provides 36,864 configurable logic elements according to its distributor product listing, 97 I/O, and operation up to 231 MHz. Its 1.5 V core-voltage support is useful for systems designed around 1.5 V-only power rails. The low-impedance Flash switch structure and single-chip implementation make the device appropriate where deterministic control logic, compact board area, and field reconfiguration are priorities. The ProASIC3 architecture is intended for low-density and ultra-low-density designs. Its logic resources can implement control functions, state machines, communication interfaces, signal conditioning, and peripheral integration. Embedded block RAM supports buffering and local data storage, while the 97 available I/O reduce the need for external interface devices when the system architecture permits direct connection to external converters, sensors, memories, and communications transceivers. Typical applications include automotive body and chassis control, industrial sensor acquisition, motor-control interfaces, industrial networking, test equipment, and embedded instrumentation. In these systems, the device can consolidate control logic that otherwise requires multiple programmable or discrete components. Reprogrammability also supports configuration variants, post-deployment updates, and design reuse across related product models. A critical design consideration is the 144-pin ball-grid-array footprint and its 1.00 mm ball pitch. The PCB must follow the manufacturer's package drawing, including ball assignments, power requirements, decoupling, and exposed thermal behavior. Do not treat a similarly named ProASIC3 device in another package as a drop-in replacement; verify the exact pinout, voltage requirements, configuration interface, and timing behavior before substitution. This product page combines the manufacturer family information, device-specific distributor specifications, packaging details, application guidance, and same-footprint alternative analysis to support engineering selection. It emphasizes the distinctions that determine whether a candidate can actually replace the A3P125-FG144 without PCB, firmware, or timing changes.
A3P125-PQ208 - 125K Gate Flash FPGA | Microchip Technology
Microchip Technology A3P125-PQ208 is a flash-based CMOS field-programmable gate array with 125,000 system gates, 3,072 logic cells, 36,864 RAM bits and 133 user I/Os. The device is supplied in a 208-pin plastic fine-pitch quad flat package measuring 28 x 28 mm with 0.50 mm lead pitch. It belongs to the ProASIC3 family of reprogrammable, nonvolatile FPGA devices. An FPGA is a programmable digital semiconductor used to implement control logic, interface bridging, signal processing and system-integration functions. In the product hierarchy, the A3P125-PQ208 is a flash-based FPGA, a programmable logic device, and a semiconductor. Its reprogrammability allows one physical device to support multiple logic configurations, while flash configuration storage supports a fast, deterministic boot sequence without an external configuration PROM. The principal capacity specifications include 125,000 typical system gates and 3,072 configurable logic blocks, commonly identified as logic cells. The device also provides 36,864 RAM bits and 133 configurable user I/O pins. Its 208-pin package exposes substantially more interface options than the logic capacity alone might suggest, making the part suitable for designs requiring parallel buses, control signals, communications links and mixed external interfaces. The ProASIC3 implementation uses 130 nm CMOS technology with a seven-layer metal structure containing six copper layers. This flash-based architecture places configuration data directly on the FPGA die. The large I/O count supports interface-intensive designs, while the embedded RAM permits practical state storage, buffering, packetization and small local data-processing functions without requiring separate external memory. Typical uses include industrial control and automation, communications interface consolidation, embedded protocol handling, test and measurement equipment, security and access-control logic, and general-purpose prototyping platforms. The 133 user I/Os are particularly useful when a design must bridge legacy parallel interfaces with newer serial peripherals while retaining deterministic control over board-level signals. Designers should assign pins from the manufacturer's package pin-assignment table, confirm bank-compatible supply voltage requirements for every external interface, and validate termination, direction and pull-up or pull-down requirements before layout. The 208-pin package also requires a controlled fanout strategy and careful decoupling across the programmable logic and I/O power domains. This product page combines the A3P125-PQ208 capacity, package, interface and technology data with drop-in family alternatives, comparison criteria and practical PCB guidance. It is intended to help engineers confirm footprint compatibility, assess logic and I/O resources, and determine whether the ProASIC3 device fits the target system before beginning board-level implementation.
A3P125-PQ208I - 125K Gate Flash FPGA | Microchip Technology
The Microchip Technology A3P125-PQ208I is a ProASIC3 field-programmable gate array with 125,000 system gates, 3,072 logic cells, and 133 user I/Os in a 208-pin BFQFP package. It is a flash-based CMOS FPGA built on a 130 nm, 7-layer metal process with six copper layers. An FPGA is a programmable digital semiconductor used to implement logic functions, interfaces, control systems, and signal processing by configuring an internal array of configurable logic blocks and routing resources. The ProASIC3 family combines nonvolatile flash configuration with a single-chip, reprogrammable implementation, allowing a design to be updated without using a separate configuration memory device. Its architecture falls within the broader FPGA and CPLD hierarchy of programmable logic semiconductors. The A3P125 device provides 36,864 internal SRAM bits and up to 133 user I/Os according to the product listing. Its configurable architecture supports system-level logic consolidation, while flash-based configuration provides Instant On operation after programming. The 208-pin plastic QFP package measures 28 mm by 28 mm, has a 0.50 mm terminal pitch, and is 3.40 mm high. The suffix I denotes the ordering configuration listed by Microchip Technology for this device. A key implementation advantage is migration support within the ProASIC3 family. Microchip's A3P250 migration application note identifies A3P125 as a lower-logic-density destination and emphasizes package-based pin compatibility within the family. This makes the A3P125-PQ208I relevant to prototype-to-production consolidation and ASIC-like embedded control designs, subject to device-specific timing, resource, and I/O validation. Typical uses include industrial control and automation, communications infrastructure, instrumentation, embedded protocol handling, and low-volume ASIC replacement. The 133 I/O count provides substantial board-level connectivity, while 3,072 logic cells can implement control logic, state machines, interfaces, and parallel data-processing functions in one programmable device. Designers should verify the exact I/O standards, supported clocking resources, available PLL and memory resources, power requirements, and programming configuration in the Microchip A3P125 documentation. PCB design must follow the 208-pin package drawing, provide clean power and ground distribution, and reserve programming and configuration resources for the intended toolchain and system architecture. This product overview combines the manufacturer specifications, package information, logic-capacity details, migration guidance, application analysis, and drop-in ordering alternatives into a design-focused reference. It also highlights verification points that engineers should check before reusing an existing 208-pin ProASIC3 PCB or transferring a design from a larger device.
A3P125-TQ144 - 125K Gate Flash FPGA, 100 I/O | Microchip
The Microchip Technology A3P125-TQ144 is a 125K-gate flash-based field-programmable gate array in a 144-pin TQFP package, providing 100 user I/O, 1.5K logic elements, and 36,864 bits of configuration flash. It is a member of the ProASIC3 family, a reprogrammable FPGA platform designed for low- to medium-density logic, embedded control, signal conditioning, and industrial control designs. A field-programmable gate array is a programmable digital logic device in which the interconnect and logic configuration are stored in non-volatile flash memory. An FPGA belongs to the broader semiconductor hierarchy of programmable logic devices, combining configurable logic blocks, programmable routing, and user I/O in one integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA permits design changes through programming rather than a new photolithography mask. The A3P125-TQ144 offers 1.5K logic elements, 125K system gates, 100 user I/O, and up to 144 kbits of true dual-port SRAM within the ProASIC3 architecture. The device is manufactured using a 130 nm CMOS process with seven metal layers, and distributor listings identify a maximum operating frequency of 231 MHz and a 1.5 V core supply. Its flash configuration supports in-system reprogramming and retains the programmed logic when power is removed. The 144-lead TQFP package provides a surface-mount footprint with 0.5 mm pitch and dimensions of approximately 28 mm by 28 mm. Compared with a fine-pitch BGA, the TQFP package is easier to inspect and rework, which benefits prototype assembly and low-volume industrial systems. Its 144-position lead count also gives the design substantially more routing options than the smaller ProASIC3 packages. Typical uses include industrial control and automation, communications interfaces, embedded protocol bridges, test equipment, and low-power embedded controllers. The 100 available user I/O make the device suitable for designs that connect external sensors, memory devices, displays, and industrial bus transceivers. Its internal SRAM supports datapaths, packet buffering, and state-machine implementations that would otherwise require external memory. When laying out the board, treat the TQFP as a fine-pitch high-density package: use a PCB footprint checked against the mechanical drawing, place decoupling capacitors at every supply pin, and reserve a ground plane around the device. Confirm the selected ProASIC3 speed and temperature grade against the production temperature range, and review the pin-placement table in the manufacturer datasheet before assigning user I/O. This page combines device specifications, verified distributor listings, same-family drop-in candidates, application guidance, and PCB-focused design notes. It is intended to accelerate schematic capture, footprint verification, sourcing, and design-review for engineers evaluating the A3P125-TQ144.
A3P125-TQ144I - 125K-Gate Industrial ProASIC3 FPGA | Microchip
The Microchip Technology A3P125-TQ144I is a 125,000-equivalent-gate ProASIC3 flash-based field-programmable gate array with 3,072 logic cells, 100 user I/Os, and a 144-lead LQFP package. It is manufactured in 130 nm CMOS and is identified as an industrial-temperature device operating from -40°C to +85°C. A ProASIC3 FPGA belongs to the programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and integrated circuit. Unlike fixed application-specific integrated circuits, an FPGA combines programmable logic, configurable interconnect, and embedded memory in a device that can be reprogrammed for multiple board and product variations. The A3P125 series combines these features in a relatively compact 144-lead package. Key resources include 125,000 system gates, 3,072 logic cells, 100 user I/Os, and support for embedded SRAM resources described by the family documentation. Its 144-LQFP package provides 144 physical leads, including power, ground, configuration, clock, and user-I/O functions. Flash-based configuration allows the programmed logic design to be retained in the device. The A3P125 implements a nonvolatile FPGA architecture on a 130 nm CMOS process with seven metal layers, including six copper layers. Family documentation identifies in-system programming support and JTAG programming through IEEE 1532-compliant configuration. A single-chip implementation can consolidate control logic, interface adaptation, glue logic, and fixed-function logic into a compact 28 mm by 28 mm plastic LQFP package. Typical uses include industrial control, data acquisition, instrumentation, embedded communications, sensor conditioning, and general-purpose logic consolidation. The 100 user I/Os make the device suitable for designs requiring substantial parallel digital connectivity, while the ProASIC3 family provides a practical path to customized control logic without developing a full custom ASIC. PCB design should preserve the package pin assignments and power-supply structure defined in the manufacturer pin-assignment and board-design files. Confirm the target board's programmed bitstream, supported I/O standards, clock requirements, decoupling, and programming interface before replacing another FPGA or launching production. This page consolidates the verified device identity, package and logic resources, same-package alternatives, comparison parameters, programming guidance, and industrial-temperature considerations into a design-focused reference for engineers evaluating the A3P125-TQ144I.
A3P125-VQ100 - 125K-Gate 231MHz ProASIC3 FPGA | Microchip
Microchip Technology A3P125-VQ100 is a ProASIC3 field-programmable gate array with 125,000 gates, 1.5K logic elements, 36,864 RAM bits, and a maximum operating frequency of 231 MHz. The device operates from a 1.5 V core supply and is packaged in a 100-lead TQFP measuring 14 x 14 mm. Its reprogrammable, nonvolatile architecture supports compact FPGA implementations without the mask set and long schedule associated with a custom ASIC. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. A ProASIC3 FPGA belongs to the broader hierarchy of programmable logic devices, combining configurable logic, embedded RAM, programmable interconnect, and general-purpose I/O in one package. This makes the device suitable for consolidating separate glue logic, control logic, interface logic, and small embedded subsystems onto a single programmable board. The A3P125-VQ100 provides 125,000 logic gates and 36,864 RAM bits in a compact 100-TQFP package. Its stated 231 MHz performance is useful for control systems, communications interfaces, instrumentation, embedded processors, and general-purpose logic consolidation where moderate clock performance and a small pin count are more important than the very high I/O counts available from larger FPGAs. The 14 x 14 mm package also supports dense surface-mount PCB layouts. ProASIC3 devices use flash-based, nonvolatile configuration technology, allowing the programmed design to remain in the device without continuous configuration reload. This provides Instant On behavior and allows field upgrades without volatile RAM. The manufacturer describes the family as a reprogrammable, single-chip solution with a small footprint and low total cost of ownership, making it useful where production volumes are below the point where a custom ASIC is economical. Typical applications include industrial automation and control, communications protocol handling, test and measurement equipment, embedded-system support logic, sensor conditioning, and general-purpose interface bridging. The 1.5 KLE device can also serve as a companion programmable controller when a system requires moderate logic density alongside a microcontroller or processor. The principal design consideration is device utilization. Logic, RAM, dedicated pins, clock resources, and available I/O must be checked against the design before layout begins. Use the manufacturer pin-description table and package drawing to assign power, ground, configuration, clock, and user I/O connections, and verify the selected board-library footprint against the 100-TQFP mechanical drawing. This product page combines the manufacturer family information with distributor technical summaries and practical comparison guidance. It organizes capacity, speed, package, temperature, replacement, and sourcing information so engineers can assess whether the A3P125-VQ100 fits a specific programmable-logic design before starting a board layout.
A3P125-VQ100I - 1.5K LE ProASIC3 FPGA | Microchip
The Microchip Technology A3P125-VQ100I is a ProASIC3 field-programmable gate array with 1.5K logic elements, 71 I/O, 36,864 bits of configuration memory, and a 100-pin TQFP package. Its surface-mount package and reprogrammable flash-based architecture support compact embedded systems requiring deterministic programmable logic, flexible peripheral integration, and in-system configuration updates. A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic blocks, programmable I/O, and internal configuration resources. FPGAs sit within the broader semiconductor and programmable-logic hierarchy, above individual logic gates and microcontrollers. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel data paths, protocol bridges, control logic, and custom interfaces by programming the device after manufacture. The A3P125-VQ100I belongs to the ProASIC3 family, which Microchip describes as an ultra-low-density FPGA family emphasizing system performance, small-footprint packages, reprogrammability, and low total cost of ownership. Its 1.5K logic-element configuration is intended for compact glue logic rather than processor-scale systems. The listed 71 I/O provide connections to external memories, sensors, transceivers, control signals, and board-level buses. The 36,864-bit configuration resource stores the programmed logic design in the device's nonvolatile flash technology. This architecture permits the same board design to be reused when the FPGA configuration changes. Programming support and the final bitstream format should be handled with the programming tools and device documentation specified by Microchip for the ProASIC3 family. Typical uses include industrial control, communications interface conditioning, data acquisition, embedded protocol conversion, sensor aggregation, and low-volume programmable control. The A3P125-VQ100I is most appropriate when several parallel logic functions are required but the implementation is too small to justify a larger FPGA or a complex microprocessor design. PCB design should preserve the manufacturer's 100-pin TQFP footprint, power and ground distribution, decoupling arrangement, configuration interface, and exposed programming connections. Because programming, system reset, and configuration behavior are tightly coupled, designers should review the pin-description table and reference design guidance in the manufacturer documentation before assigning PCB signals. This product page organizes the verified A3P125 device identity, package information, searchable technical questions, and compatible ProASIC3 ordering variants. It also provides practical selection guidance for engineers comparing package codes and designing compact embedded systems without relying on unrelated device families as drop-in replacements.
A3P125-VQ100T - 125K Gate Flash FPGA | Microchip | 100-VQFP
The Microchip Technology A3P125-VQ100T is a 125,000-system-gate flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, housed in a 100-pin VQFP (14x14 mm) package. It delivers 3,072 logic cells, 36,864 bits of true dual-port SRAM, and 71 user I/Os, operating from a 1.425V to 1.575V core supply. This device is AEC-Q100 qualified for automotive applications and supports an industrial temperature range of -40°C to 125°C. An FPGA (Field Programmable Gate Array) is a semiconductor device containing an array of programmable logic blocks and configurable interconnects that can be programmed after manufacturing to implement custom digital logic. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which themselves are a subset of integrated circuits (ICs) used in digital electronics. Unlike SRAM-based FPGAs that require external configuration memory at power-up, flash-based FPGAs like the ProASIC3 family are non-volatile, offering instant-on operation, lower standby power, and enhanced security against bitstream tampering. Key features of the A3P125-VQ100T include 125,000 system gates, 3,072 logic cells, and 36,864 bits of true dual-port SRAM. The device provides 71 user I/Os with support for multiple I/O standards, and its flash-based architecture eliminates the need for external boot memory. The 100-VQFP package measures 14x14 mm with a 0.5 mm pitch, enabling compact PCB designs. The device operates from a 1.425V to 1.575V supply and is AEC-Q100 qualified, making it suitable for automotive and other mission-critical applications. Built on a 130-nm, 7-layer metal (6 copper) flash-based CMOS process, the A3P125-VQ100T offers a single-chip solution with low total cost of ownership (TCO). The flash-based architecture provides instant-on capability, meaning the device is ready to operate immediately upon power-up without external configuration. This also provides inherent security advantages, as the configuration is stored on-chip and is resistant to unauthorized readback. The device supports optional soft ARM® processor cores, enabling system-on-chip (SoC) designs within a single FPGA. Typical applications include automotive electronics, industrial control systems, communications infrastructure, and consumer electronics. The A3P125-VQ100T is particularly well-suited for applications requiring instant-on operation, high reliability, and security, such as automotive body control modules, motor control, and secure communication interfaces. Its 71 user I/Os and 36,864 bits of SRAM provide sufficient resources for medium-complexity logic designs. When designing with this device, ensure adequate decoupling on the 1.5V core supply and follow the manufacturer's layout guidelines for the VQFP package. The device's non-volatile nature means no external configuration device is required, simplifying the BOM and reducing system cost. Consider the I/O standards supported by the device to ensure compatibility with your system's voltage levels. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P125-VQ100T in their designs.
A3P125-VQG100 ProASIC3 Flash FPGA 71 I/O TQFP-100 | Microchip
The Microchip (Microsemi) A3P125-VQG100 is a ProASIC3 flash-based FPGA with 1,500 logic elements (1.5K LEs), 71 user I/Os, and 36,864 bits of embedded dual-port SRAM, housed in a 100-pin TQFP (VQG100, 14x14 mm) surface-mount package. According to the ProASIC3 datasheet, the family provides 1 M system gates to 144 Kbits of true dual-port SRAM with 700 Mbps DDR, LVDS-capable I/Os on A3P250 and above. A flash-based FPGA is a type of field-programmable gate array that stores its configuration in on-chip nonvolatile flash memory rather than an external configuration ROM. Within the programmable-logic hierarchy, the A3P125 sits at the low end of the ProASIC3 family, below the A3P250, A3P600, and A3P1000, making it a power-management-friendly, single-chip programmable logic solution for glue logic and control applications. Key features include nonvolatile Flash technology that eliminates the external boot PROM and enables instant-on, single-chip operation; reprogrammability for field updates; live_SEE secure programming support within the ProASIC3 family; and low total cost of ownership (TOC) as highlighted by Microchip. The 1.5K-logic-element density suits state machines, bus interfaces, and control-plane logic that do not justify larger FPGAs. The ProASIC3 architecture uses a sea-of-vanilla-core logic fabric with optional Soft ARM support in the family, allowing small embedded controllers to be instantiated alongside user logic. Routing and timing are deterministic, and the flash cells retain configuration through power cycles without serial configuration devices. Typical applications include industrial control boards, communication interface bridging, portable instruments, and aerospace/defense systems where low power, instant-on flash configuration, and a compact 100-pin footprint are priorities. Design consideration: budget I/O banking rules and core voltage (1.5 V nominal for the ProASIC3 fabric) early in the schematic, since the 71 available I/Os constrain wide bus designs. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing from DigiKey, Mouser, LCSC, and Octopart, same-package drop-in alternatives, and practical sourcing guidance for the A3P125-VQG100.
A3P250-1FG144T - ProASIC3 FPGA, 250K Gates | Microchip
The Microchip Technology A3P250-1FG144T is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, offering 250,000 system gates, 97 user I/Os, and 36,864 bits of RAM in a 144-pin FBGA package. It operates at a core voltage of 1.5V and supports system performance up to 272 MHz, making it suitable for a wide range of low-density, high-reliability applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike microcontrollers, which execute software instructions sequentially, FPGAs provide parallel hardware execution, enabling high-speed data processing and flexible I/O interfacing. FPGAs are part of the programmable logic device (PLD) family, which also includes CPLDs and SoC FPGAs, and are widely used in prototyping, aerospace, automotive, and industrial applications where reconfigurability and deterministic timing are critical. Key features of the A3P250-1FG144T include its flash-based configuration, which retains the design without external boot memory, providing instant-on capability and enhanced security against reverse engineering. The device offers 97 user I/Os, 36,864 bits of RAM, and 272 MHz system performance, all in a compact 144-pin FBGA package. Its low power consumption and single-chip solution reduce total cost of ownership (TOC) compared to SRAM-based FPGAs that require external configuration devices. Technically, the A3P250-1FG144T is fabricated using 130nm flash technology, which provides non-volatile, reprogrammable logic with high reliability. The device supports multiple I/O standards, including LVCMOS, LVTTL, and PCI, and includes phase-locked loops (PLLs) for clock management. The flash-based architecture eliminates the need for configuration PROMs, simplifying board design and reducing component count. Typical applications include automotive electronics, industrial control, communications infrastructure, and aerospace systems where reliability and security are paramount. The device's 1.5V core voltage and 272 MHz performance make it ideal for glue logic, bus interfacing, and protocol bridging in embedded systems. When designing with this device, ensure proper decoupling of the 1.5V core supply and follow the manufacturer's layout guidelines for the FBGA package to minimize signal integrity issues. The device supports in-system programming, allowing field updates without removing the FPGA from the board. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-1FG144T.
A3P250-1FG256 - 3KLE ProASIC3 FPGA | Microchip
Microchip Technology A3P250-1FG256 is a ProASIC3 field-programmable gate array in a 256-LBGA package, with 3K logic elements, 36,864 bits of embedded block RAM, and 157 user I/O. The device operates across a 0°C to +85°C temperature range and provides a compact, reprogrammable platform for digital control, interface, and logic-integration applications. A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose logic and interconnect resources are configured after manufacture. Within the broader programmable-logic hierarchy, an FPGA provides more flexible parallelism than a fixed-function logic circuit while offering faster development cycles than a custom application-specific integrated circuit. The A3P250 combines programmable logic, embedded memory, and user I/O in one package. The ProASIC3 family is positioned for low-density designs requiring a small package and a broad selection of I/O resources. In the A3P250-1FG256, the 3KLE logic capacity is complemented by 36,864 bits of block RAM and 157 I/O. These resources suit designs that must consolidate control logic, communication interfaces, data acquisition front ends, or general-purpose glue logic without introducing the size and complexity of a larger programmable device. Because the FPGA configuration is programmable, engineers can implement and revise multiple hardware functions in the same device family. The 256-LBGA package supports dense board layouts where 157 I/O are valuable, but its fine-pitch construction requires careful PCB design, component placement, and manufacturing control. Designers should assign pins and banks according to the package-specific pin table rather than inferring connectivity from another package variant. Typical uses include industrial equipment controllers, data-acquisition modules, communications infrastructure, embedded test systems, and compact control platforms. The 157-I/O count is particularly useful for systems collecting parallel sensor data or coordinating multiple digital interfaces. The 36,864-bit block RAM can support packet buffering, sampled-data storage, lookup tables, and intermediate logic data where modest on-chip memory is sufficient. The main design consideration is package-level implementation. Place the device on a multilayer PCB with a continuous ground plane, route high-speed or sensitive signals using controlled impedance, and follow the manufacturer’s decoupling and ball-assignment guidance. Verify the programmed bitstream against the exact A3P250-1FG256 device, package, and temperature variant before production programming. This page combines device specifications, practical PCB guidance, application fit, and a qualified same-package replacement option. It also identifies the principal electrical, timing, power, and pin-level values that must be taken directly from the official Microchip documentation before schematic release or volume manufacturing.
A3P250-1FGG144T - ProASIC3 FPGA 250K Gates FBGA-144 | Microchip
The Microchip Technology (Microsemi/Actel) A3P250-1FGG144T is a ProASIC3 family field programmable gate array with 250,000 system gates, 6,144 logic cells (CLBs), and 97 user I/Os, housed in a 144-ball Fine-Pitch Ball Grid Array (FBGA-144) with 1.0 mm ball pitch. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that the designer configures after manufacturing. Within the semiconductor hierarchy, the A3P250 belongs to the nonvolatile flash-based FPGA class, sitting under the broader categories of programmable logic devices and digital logic ICs. Unlike SRAM FPGAs, ProASIC3 devices store their configuration in on-chip flash, so they power up instantly as a single-chip solution with no external boot configuration PROM. Key features include flash-based live-at-power-up operation, 130 nm CMOS process technology, a 1.5 V core supply, and system performance up to 350 MHz per distributor specification data (FPGAkey lists 272 MHz typical for the -1 speed grade), making it suited for glue logic consolidation and low-power control paths. The device is reprogrammable in-system, reducing total cost of ownership by eliminating configuration devices and supporting design iteration late in production. The ProASIC3 architecture provides versatile logic fabric with embedded memory, and the -1 speed grade balances performance with lower static power. The FBGA-144 package occupies a small footprint suited to space-constrained industrial and communications boards, and the green package supports environmental compliance goals. Typical applications include industrial automation control, portable and battery-powered instruments, communications interface bridging, and aerospace/defense systems that benefit from flash FPGA immunity to configuration readback and single-event configuration upsets. When designing with this device, verify the 1.5 V core and 3.3 V-class I/O power rails against the ProASIC3 datasheet, and budget I/O assignments against the 97-user-I/O limit of the FBGA-144 package. This page synthesizes verified distributor data, drop-in same-package alternatives, and practical design guidance not found on a single manufacturer or distributor page.
A3P250-1FGG256T - ProASIC3 Flash FPGA 250k Gates | Microchip
The Microchip Technology (Microsemi) A3P250-1FGG256T is a flash-based ProASIC3 field programmable gate array (FPGA) delivering 250,000 system gates (6144 CLBs) with up to 157 user I/Os in a 256-ball Fine-Pitch Ball Grid Array (FBGA-256) with 1 mm ball pitch, speed grade -1, supplied in tape and reel packaging. An FPGA is a semiconductor device containing a matrix of configurable logic blocks (CLBs) connected by programmable interconnects, allowing designers to implement custom digital logic after manufacturing. The ProASIC3 family from Microsemi (now Microchip Technology) is built on flash-based programmable logic technology, which distinguishes it from SRAM-based FPGAs: configuration is stored in on-chip flash cells, so the device is single-chip, instant-on at power-up, and needs no external configuration PROM. Key features include nonvolatile flash configuration enabling live-at-power-up operation, reprogrammability with high security (FlashLock), low total cost of ownership (TOC) with no boot PROM or configuration controller, and a small footprint package suited to space-constrained boards. The -1 speed grade supports system performance up to approximately 350 MHz toggle capability per distributor listings. Technically, the A3P250 integrates 6144 versatile VersaTiles in CMOS flash process technology. The fabric supports single-ended and differential I/O standards, and the architecture is targeted at glue logic consolidation, interface bridging, and control-plane functions where a single-chip, low-power, secure solution is preferred over SRAM FPGAs. Typical applications include industrial automation control, communications line cards, portable and battery-powered instruments, and aerospace/defense subsystems requiring secure, instant-on programmable logic. Design consideration: verify I/O bank voltage compatibility with adjacent chips and use Microchip Libero SoC design software for synthesis and place-and-route; flash FPGAs cannot be reconfigured in-flight like SRAM devices, so plan static configurations. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and FAQ content not found in a single manufacturer datasheet.
A3P250-1PQ208 - 250K Gate ProASIC3 FPGA | Microchip Technology
The Microchip Technology A3P250-1PQ208 is a ProASIC3 flash FPGA with 250K logic gates, 36,864 logic cells, 151 user I/Os, and operation up to 272 MHz. The device is packaged in a 208-pin 208-BFQFP package and operates from a 1.5 V core supply. It combines programmable logic, embedded flash configuration storage, and a 130 nm process technology in a single reprogrammable device. A field-programmable gate array is a semiconductor device whose digital logic, routing, and I/O behavior are configured after manufacture. The ProASIC3 family belongs to the FPGA and CPLD hierarchy and provides a hardware implementation of parallel processing, control, interface, and protocol logic. Unlike a fixed-function ASIC, the A3P250-1PQ208 can be reprogrammed to support design revisions, field updates, product differentiation, and consolidated control logic. The primary device features include 250K logic gates, 36,864 logic cells, 151 I/O resources, a 272 MHz maximum operating frequency, 130 nm process technology, and a 1.5 V core voltage. Its 208-pin package provides a substantial interface count for designs connecting external memories, data converters, communications transceivers, sensors, and industrial control equipment. The embedded flash configuration memory supports nonvolatile FPGA configuration in the finished system. The A3P250-1PQ208 belongs to the ProASIC3 family, whose device options cover different logic densities and package configurations. Within the family, device migration is constrained by package pin compatibility, resource availability, I/O standards, timing performance, and power requirements. The Microchip migration application note identifies pin compatibility as a primary consideration when moving an A3P250 design to lower-density A3P125, A3P060, or A3P030 devices. Consequently, any substitute must be evaluated against both its physical footprint and the complete design-resource requirements. Typical uses include industrial automation, instrumentation, communications control, embedded processing, test equipment, and general-purpose digital signal control. The 151-I/O configuration is particularly useful when a design must coordinate multiple buses or peripheral interfaces. At the same time, the 208-pin package requires careful PCB planning because high pin count increases routing complexity and makes power and ground distribution important for reliable operation at higher clock frequencies. For new layouts, assign power and ground pins according to the manufacturer pinout and keep sensitive configuration or interface routing away from switching nodes. Verify that the selected device variant satisfies the required I/O voltage, speed grade, temperature range, and package dimensions. Existing boards should be checked against the exact manufacturer drawing before considering another ProASIC3 part as a replacement. This page combines the exact A3P250-1PQ208 identity, verified family specifications, price treatment, documented drop-in candidates, and practical migration guidance. It also distinguishes confirmed package-compatible options from lower-density devices that can require logic reassignment, which helps engineers evaluate an FPGA replacement without treating shared package names as proof of complete design equivalence.
A3P250-1PQG208I - ProASIC3 FPGA, 250K Gates | Microchip
The Microchip Technology A3P250-1PQG208I is a ProASIC3 Field Programmable Gate Array (FPGA) with 250,000 system gates, 36,864 bits of flash-based RAM, and 151 user I/Os, housed in a 208-pin BFQFP (PQFP) package. It operates over the industrial temperature range of -40°C to +100°C and is lead-free (RoHS compliant). This device is part of Microchip's ProASIC3 family, which offers a single-chip, flash-based, reprogrammable solution with low total cost of ownership (TCO) and system performance up to 350 MHz. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and interconnects that can be programmed to implement any digital logic function. The ProASIC3 family uses flash-based configuration cells, which are non-volatile, meaning the device retains its configuration when power is removed. This makes it a secure, instant-on solution that is ideal for applications requiring high reliability and low power consumption. Key features of the A3P250-1PQG208I include 250,000 system gates, 36,864 bits of RAM, and 151 user I/Os. The device supports up to 350 MHz system performance and is reprogrammable, allowing for design updates in the field. The flash-based architecture provides inherent security against reverse engineering and configuration bitstream interception. The device also features low power consumption, making it suitable for battery-powered and thermally constrained applications. The ProASIC3 architecture is based on a flash-based switch matrix that connects logic tiles and routing resources. This architecture eliminates the need for external configuration memory, reducing system cost and board space. The device supports various I/O standards, including LVCMOS, LVTTL, and PCI, and includes phase-locked loops (PLLs) for clock management. The flash-based configuration is instant-on, providing immediate functionality upon power-up. Typical applications for the A3P250-1PQG208I include industrial control systems, communications infrastructure, avionics, and consumer electronics. Its low power and high reliability make it suitable for automotive and medical applications. The device is also used in ASIC prototyping and as a cost-effective alternative to ASICs in low-to-medium volume production. When designing with this device, consider the power supply requirements and decoupling. The FPGA requires multiple supply voltages, and proper decoupling capacitors should be placed near the power pins to ensure stable operation. The flash-based configuration is non-volatile, so no external configuration device is needed, simplifying the design. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P250-1PQG208I.
A3P250-1VQ100M - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology A3P250-1VQ100M is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) with 250,000 system gates, 3,000 logic elements (3KLEs), and 68 user I/Os, housed in a 100-pin VQFP (VQ100) package. It operates at a core voltage of 1.5V and supports system performance up to 272 MHz, making it a low-power, single-chip solution for cost-sensitive applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without re-fabrication. The ProASIC3 family uses flash-based configuration, which retains the program even when power is removed, providing instant-on capability and enhanced security. This places the A3P250-1VQ100M in the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. Key features include 250K system gates, 3K logic elements, 68 user I/Os, and 36,864 bits of RAM. The device supports multiple I/O standards including LVCMOS, LVTTL, and PCI, and includes a PLL for clock management. Its flash-based architecture offers low power consumption, with a typical static power of only 0.02W, and is inherently immune to configuration bitstream corruption, making it ideal for safety-critical applications. The A3P250-1VQ100M is built on a 130nm flash process, providing a balance of performance and power. It features a single-chip solution with no external boot memory required, reducing BOM cost and board space. The device is reprogrammable, allowing field updates, and includes security features to prevent reverse engineering. Its 272 MHz system performance supports a wide range of digital designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. In industrial settings, the FPGA can implement motor control, sensor interfacing, and protocol bridging. In automotive, it supports in-vehicle networking and driver assistance systems. Its low power and small footprint make it suitable for portable and battery-powered devices. When designing with this device, ensure proper power supply decoupling with 0.1uF and 10uF capacitors near the VCC and GND pins. The core voltage is 1.5V, and I/O banks can operate at 1.5V, 1.8V, 2.5V, or 3.3V depending on the bank voltage. Use the PLL for clock generation and consider the 68 I/O limit when planning pin assignments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-1VQ100M.