A3P125-2TQ144 - 36Kb ProASIC3 FPGA, 100 I/O | Microchip
MPN: A3P125-2TQ144 ✓ چالاکA3P125-2TQ144 گشتی
An FPGA is a programmable logic device within the broader semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows its interconnect and logic fabric to be configured after manufacture. The A3P125 belongs to the ProASIC3 Flash family, whose nonvolatile configuration memory supports field reprogramming without requiring a separate external configuration PROM.
The A3P125 device provides 36,864 logic cells, 36 Kb of block RAM, and 100 I/O in the 144-pin TQFP package. Its speed-grade designation is -2, while the TQ144 suffix identifies the 144-lead package. The package occupies a 20 mm by 20 mm footprint and is intended for surface-mount PCB assembly. A separate industrial-temperature ordering code, A3P125-2TQG144I, is also available in the same 144-pin package for applications requiring an extended commercial-temperature qualification.
This ProASIC3 architecture is useful for control logic, bus interfacing, protocol bridging, data acquisition, and compact embedded systems that benefit from field-reprogrammable hardware. Its 100 I/O provide more external connections than lower-density members of the family, while the 36 Kb of RAM can support buffers, packet storage, and state-machine data. Configuration is retained in on-chip Flash memory, simplifying system updates after the board has been manufactured.
Typical applications include industrial automation, communications adapters, instrumentation, embedded control, and signal-processing front ends. Engineers can use the same A3P125 silicon platform across prototype and production systems because Flash configuration permits design updates without changing the PCB. The A3P125-2TQ144 is therefore particularly suitable when moderate logic density, a large I/O count, and nonvolatile reconfiguration are more important than very high FPGA performance.
PCB implementation requires careful attention to the TQFP-144 footprint, pin-1 orientation, configuration pins, power rails, and decoupling. Follow the manufacturer pin-description table and board-design file when assigning tracks and plane connections. Treat the device as a configurable digital IC rather than a power semiconductor, so an SOA curve is not applicable. Programming support and bitstream compatibility should be checked against the selected ProASIC3 toolchain before committing the design to production.
This page consolidates the exact A3P125-2TQ144 ordering information, package characteristics, replacement options, and application-specific design guidance into one engineering reference. It also identifies where sourcing requests should be submitted without embedding temporary commercial terms into the technical documentation.
جێگرەوەکانی جێگۆڕکێ بۆ A3P125-2TQ144 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ A3P125-2TQ144 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Configuration Memory, Device Type, Logic Cells, Maximum Frequency.
A3P125-2TQG144I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →A3P125-2TQ144I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
A3P125-TQG144
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →A3P125-TQG144I
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
A3P125-TQ144
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →A3P125-2TQ144 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | ProASIC3 Flash FPGA |
| Logic Cells | 36,864 cells |
| Block RAM | 36 Kb |
| User I/O | 100 I/O |
| Speed Grade | -2 |
| پاکێج | 144-pin TQFP |
| Package Dimensions | 20 mm x 20 mm |
| جۆری دامەزراندن | Surface mount |
| Configuration Memory | On-chip Flash |
| پلەی گەرمیی کارکردن | 0 °C to 85 °C junction |
| Logic Family | ProASIC3 Flash |
| Programming | Reconfigurable Flash configuration |
ڕێنمایی ڕێکخستنی پینی A3P125-2TQ144 20 mm x 20 mm
ڕێکخستنی پین بۆ A3P125-2TQ144 (پاکێجی 20 mm x 20 mm). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ A3P125-2TQ144.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
A3P125-2TQ144 گونجاوە بۆ 6 بەکارھێنانs: Industrial Automation Controllers, Communications Protocol Bridges, Data Acquisition and Instrumentation, Embedded Control and Sensor Fusion, Networking and Interface Adapters, Low-Power Control and Security Systems.
Industrial Automation Controllers
The A3P125-2TQ144 fits compact machine controllers that must combine sequential logic, sensor inputs, actuator outputs, and field-reprogrammable behavior. Its 36,864 logic cells provide substantial capacity for state machines, interlocks, timing, and communications protocols, while 100 user I/O reduce the need for external interface logic. On-chip Flash configuration allows operating firmware to be corrected after deployment without replacing the controller. The -2 speed grade provides a defined timing class for the commercial 0 °C to 85 °C junction range. Use the industrial-temperature A3P125-2TQG144I when the enclosure environment exceeds that range, and keep high-current switching and sensitive analog signals physically separated from the FPGA.
پێشنیارکراو
Communications Protocol Bridges
The A3P125-2TQ144 is suitable for protocol converters and data-routing adapters requiring flexible logic, multiple external interfaces, and reconfigurable firmware. Its 36,864 logic cells can support parallel-to-serial conversion, frame generation, filtering, and flow control, while the 100 I/O offer enough connections for several buses or chip-select lines. The 36 Kb of block RAM can buffer short packets or hold state between transactions. Because the configuration is held in Flash, a deployed bridge can accept logic changes when interface requirements evolve. Designers should define clock domains carefully, use synchronized boundary crossings, and verify each interface's timing against the selected -2 device characterization.
پێشنیارکراو
Data Acquisition and Instrumentation
The A3P125-2TQ144 can implement acquisition control, timing, and interface logic for compact test and measurement equipment. Its 100 I/O allow the FPGA to coordinate multiple sensor channels, control indicators, and communicate with an upstream processor, while the 36 Kb of embedded RAM supports sample buffering and state tracking. The Flash-based configuration is useful in instruments that require firmware revisions or customer-specific measurement sequences without PCB rework. Place decoupling capacitors beside every applicable power pin, use controlled clock routing for sampling accuracy, and terminate high-speed inputs according to the board-design guidance. Verify acquisition timing at the required ambient and junction temperatures before production release.
پێشنیارکراو
Embedded Control and Sensor Fusion
The A3P125-2TQ144 is appropriate for sensor-intensive embedded products that need deterministic logic alongside several peripheral connections. A designer can assign 100 I/O to digital sensors, encoders, displays, and actuators, then use programmable logic for filtering, interpolation, or event aggregation. The 36 Kb of block RAM can hold calibration tables or short histories, and Flash configuration supports field updates across deployed product variants. Compared with a microcontroller-only implementation, the FPGA fabric permits parallel processing and deterministic timing. A practical partition places sensor conditioning and timing-critical logic in the FPGA while a microcontroller handles configuration, diagnostics, and supervisory functions.
پێشنیارکراو
Networking and Interface Adapters
The A3P125-2TQ144 can serve as the configurable logic core in a small network or peripheral adapter, especially when multiple legacy interfaces must be consolidated. Its 100 I/O support address, data, control, and interrupt signals for several external devices, while 36,864 logic cells provide room for arbitration, packetization, and protocol state machines. The nonvolatile Flash configuration permits interface revisions through the normal programming flow, reducing the need for board respins. For networking equipment, constrain clock and high-speed routing paths, provide proper termination, and separate switching or high-current outputs from sensitive logic. Confirm the exact pin multiplexing and configuration requirements in the manufacturer package documentation.
پێشنیارکراو
Low-Power Control and Security Systems
The A3P125-2TQ144 can support access controls, alarm systems, and compact security peripherals that benefit from flexible logic and persistent configuration. Dedicated user I/O can drive indicators, relays, readers, and supervisory signals, while the programmable fabric can implement access sequences, debouncing, event logging, and communication formatting. On-chip Flash allows authorized configuration changes and stores the programmed logic without an external configuration memory. Security-sensitive designs should include appropriate lock, read-protection, and programming controls supported by the device and programming environment. The TQFP-144 body remains a factor in compact enclosures, so thermal analysis and copper allocation should account for switching activity on high-fanout outputs.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ A3P125-2TQ144 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | A3P125-2TQG144I | A3P125-2TQ144I | A3P125-TQG144 | A3P125-TQG144I | A3P125-TQ144 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 |
| Logic Cells | 36,864 cells | 36,864 cells | 36,864 cells | 36,864 cells | 36,864 cells | 36,864 cells |
| Block RAM | 36 Kb | 36 Kb | 36 Kb | 36 Kb | 36 Kb | 36 Kb |
| User I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O |
| Speed Grade | -2 | -2 | -2 | Not explicitly stated in ordering code | Not explicitly stated in ordering code | Not explicitly stated in ordering code |
| Temperature Ordering Option | Commercial, 0 °C to 85 °C junction | Industrial-temperature ordering option | Industrial-temperature ordering option | Industrial-temperature ordering option | Industrial-temperature ordering option | Commercial-temperature ordering option |
| Configuration Memory | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash |
جیاکەرەوە سەرەکییەکان
- Explicit -2 speed-grade ordering (بەراورد بەA3P125-TQ144)
- Industrial-temperature drop-in path on the same footprint (بەراورد بەA3P125-2TQG144I)
- High I/O density for a compact low-density FPGA (بەراورد بەA3P125-VQG100)
- Field-reprogrammable Flash configuration (بەراورد بەA3P125-TQG144)
تێبینییەکانی دیزاین
Use the Microchip a3p125_tq144.bsd board-design file and the TQFP-144 footprint with the correct pin-1 orientation. The package includes 100 user I/O plus dedicated configuration, power, and ground pins, so the complete manufacturer pin-description table must be used when assigning every package lead. Place all required decoupling capacitors close to their associated supply pins, provide a continuous ground reference beneath the device, and route configuration signals away from high-speed switching nodes.
Decouple each applicable supply rail according to the ProASIC3 power-supply requirements and keep the high-current return path electrically short. Separate core and I/O return paths where the board guidance calls for distinct planes, and connect every ground pin rather than relying on neighboring signal pins for return current. Validate supply sequencing, voltage tolerances, and power-up behavior against the exact A3P125 ordering code; the -2 suffix is a speed designation and does not remove the need for separate supply verification.
Reserve clock-capable pins for the intended clock source and keep oscillator or external clock routing short, away from high-current outputs and switching nodes. Use the device's programmable I/O and on-chip resources according to the ProASIC3 implementation guidance, and provide a defined configuration path that remains stable during programming and reset. For communications or acquisition interfaces, constrain timing-critical routes and assign I/O standards only after confirming the voltage and slew-rate requirements.
Do not treat equal package dimensions as sufficient proof of interchangeability. Before substituting another A3P125 ordering code, compare the speed grade, temperature range, supply limits, configuration pins, and programmed-device compatibility. Also avoid designing around the 100 user I/O as if all 144 package leads were available for user signals; the remaining leads serve power, ground, configuration, and other fixed functions.
زانیاری پابەندبوون
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact ordering code. The AEC-Q100 field is not applicable because this is a programmable logic device rather than an automotive-qualified semiconductor.