Logic ICs
بەرهەمەکان (720+)
74LVC1GU04GW,125 - Single Unbuffered Inverter | Nexperia | 5-TSSOP
The Nexperia 74LVC1GU04GW,125 is a single unbuffered inverter IC housed in a 5-pin TSSOP (SOT-353/UMT5) package, built on a Si-gate CMOS process that delivers superior performance over most advanced CMOS-compatible TTL families. The device operates across a wide 1.65 V to 5.5 V supply range and accepts input drive levels from either 3.3 V or 5 V logic, making it drop-in compatible with mixed-voltage system designs. As an unbuffered (raw inverter) topology, it provides the shortest possible propagation delay in its class while maintaining low static power consumption. An unbuffered inverter is a single-input CMOS logic function that inverts the input logic level at the output without an internal Schmitt-trigger or amplification stage. This places the unbuffered inverter in the digital-logic IC family hierarchy: inverter -> gate -> combinational logic -> logic IC -> integrated circuit -> semiconductor. Unbuffered inverters are preferred over buffered (standard) inverters in oscillator circuits, linear amplifiers, and analog signal paths because the absence of an internal gain stage preserves signal linearity and minimizes additive phase shift. The 74LVC1GU04GW,125 features a typical quiescent current of 100 µA, ±24 mA output drive capability at 3.3 V, and propagation delay of 1.7 ns typical at 3.3 V VCC with 15 pF load. The wide operating voltage window, schmitt-tolerant inputs, and 5-pin TSSOP footprint make it ideal for portable, IoT, and space-constrained PCB layouts. Nexperia's LVC family is also characterized by low-power operation, making it suitable for battery-powered applications where quiescent current directly affects runtime. The device architecture uses a single CMOS inverter cell whose output transitions follow the input directly without hysteresis. This raw-inverter topology is essential when the inverter is used as a linear amplifier or in crystal-oscillator feedback loops where the buffered variant's gain stage would distort the waveform. The 5-pin SOT-353 package provides a compact 2.0 mm x 1.25 mm x 1.1 mm outline. Typical applications include crystal oscillator modules, sine-wave to logic-level converters, level translation in mixed 3.3 V / 5 V systems, and general-purpose logic inversion in portable and IoT devices. The device is also commonly used as a small-signal amplifier in RF detector circuits and as a delay element in digital timing chains. When designing with this part, note that the input has no Schmitt-trigger hysteresis; therefore, slow or noisy edges may produce multiple output transitions. Place a small series resistor at the input (typically 100 ohm to 1 kohm) when driving from long PCB traces to control edge rate. The 5-TSSOP package has a thermal resistance of approximately 250 C/W, so output current must be limited well below 24 mA continuous in high-ambient-temperature environments. This page synthesizes Nexperia distributor pricing, real cross-brand drop-in equivalents sourced from the same 5-TSSOP footprint, and practical analog/digital design notes not found in the manufacturer datasheet.
74LVC2G02DC-Q100 - Dual 2-Input NOR Gate, AEC-Q100 | Nexperia
The Nexperia 74LVC2G02DC-Q100 is a dual 2-input NOR gate fabricated in CMOS logic and qualified to the AEC-Q100 automotive reliability standard, housed in an 8-pin VSSOP (SOT765, DC) package measuring approximately 2.30 mm x 2.30 mm. Each gate independently performs the Boolean NOR function Y = NOT(A OR B), and both gates share a common supply pin. The device operates across a 1.65 V to 5.5 V VCC range, with inputs tolerant of voltages up to 5.5 V regardless of VCC level, enabling direct interfacing between 3.3 V and 5 V nodes in mixed-voltage designs. A NOR gate is a fundamental CMOS logic building block that produces a HIGH output only when both of its inputs are LOW; when either input goes HIGH, the output is forced LOW. As part of the broader logic IC family (logic gate -> combinational logic -> digital IC -> semiconductor), the NOR function is functionally complete on its own, meaning any Boolean expression can be constructed from NOR gates alone - a property leveraged in classic RTL designs and modern low-density glue-logic applications. Key parametric features include a typical propagation delay of approximately 2.4 ns at 5 V VCC (per Nexperia 74LVC2G02 family datasheet), Schmitt-trigger inputs that tolerate slow or noisy edges, IOFF circuitry that disables outputs during partial-power-down to prevent backflow current, and automotive-grade reliability from -40 C to +125 C. The wide supply range supports both 1.8 V, 2.5 V, 3.3 V, and 5 V rails without level shifters. Architecturally, the device uses Nexperia's standard LVC (Low-Voltage CMOS) topology with parallel P/N-MOS pull-up/pull-down networks sized for balanced rise and fall times. The Schmitt-trigger hysteresis at each input raises the noise margin above that of conventional CMOS gates, while IOFF diodes protect downstream ICs when VCC collapses. Typical applications include automotive body and chassis ECUs, infotainment and ADAS sensor signal conditioning, 3.3 V-to-5 V level translation, control logic for motor drivers, and general-purpose glue logic in industrial PLCs. The Q100 suffix indicates AEC-Q100 qualification for automotive use cases. When laying out the part, place the VCC decoupling capacitor within 2 mm of the supply pin and avoid routing noisy switching traces near the inputs to preserve the Schmitt-trigger hysteresis. For battery-powered designs, account for the quiescent supply current draw even when logic states are static.
74LVC2G125DC - Dual 3-State Buffer 1.65V-5.5V | Nexperia
The Nexperia 74LVC2G125DC is a dual non-inverting buffer/line driver with 3-state outputs, housed in an 8-pin VSSOP (SOT765) package. It operates over a wide supply voltage range of 1.65 V to 5.5 V and accepts input signals up to 5.5 V regardless of VCC, enabling seamless interfacing between 3.3 V and 5 V logic families without level shifters. A buffer IC (also called a line driver) is a digital logic component whose primary function is to isolate a signal source from its load while reproducing the input logic level at the output with no inversion. Buffers with 3-state outputs (high, low, high-impedance) allow multiple devices to share a common bus by selectively enabling or disabling the output stage. The 74LVC family belongs to the Low-Voltage CMOS logic family, characterized by low static power consumption, high noise margin, and 5 V input tolerance even when powered at lower voltages - making it ideal for mixed-voltage system designs. Key features include ±24 mA output drive capability at VCC = 3.0 V, typical propagation delay of 2.0 ns at VCC = 3.3 V, and integrated ESD protection exceeding 2000 V HBM (JESD22-A114) and 200 V MM (JESD22-A115). Each buffer has an independent active-low output enable pin (1OE, 2OE), allowing per-channel bus control. The CMOS low-power design minimizes quiescent current draw, which is critical for battery-powered and always-on applications. The 74LVC2G125DC utilizes Nexperia's advanced CMOS process with Schmitt-trigger inputs for improved noise immunity and slow-input transition tolerance. Output edges are well-controlled, and the symmetric output drive ensures balanced rise/fall times across operating conditions. Independent enable inputs support partial power gating, enabling selective deactivation of unused signal paths. Typical applications include bus isolation in mixed-voltage systems, signal buffering for memory and peripheral interfaces, level translation between 5 V and 3.3 V logic domains, fan-out expansion for clock distribution, and I/O port expansion in microcontrollers. The wide operating range makes it equally suitable for portable consumer devices and industrial control systems. When designing with this part, ensure that the 3-state enable pins are properly managed to avoid bus contention. Always deassert nOE before changing direction in bidirectional applications to prevent momentary short circuits. The VSSOP-8 package requires careful PCB layout for clean signal integrity at high data rates.
74LVC4245ABQ+118 - Octal Dual-Supply Translating Transceiver | Nexperia
The Nexperia 74LVC4245ABQ+118 is an octal dual-supply translating transceiver featuring non-inverting 3-state bus-compatible outputs in both send and receive directions, housed in a 24-pin DHVQFN (5.5x3.5) package with an exposed thermal pad. The device is designed to interface between a 3 V and 5 V bus in a mixed-voltage supply environment, providing bidirectional voltage translation across eight channels with a single direction-control input (DIR) and an output-enable input (OE). A HIGH on OE forces all outputs to a high-impedance state, allowing bus isolation when required. A voltage level translator is an interface IC that allows logic signals crossing different supply domains to communicate without damage or signal integrity loss. Within the broader hierarchy, the 74LVC4245A sits inside the bus transceiver family, which is itself part of the logic IC category, under the umbrella of interface ICs and integrated circuits. The "dual supply" qualifier means the IC carries two independent VCC rails: a 5 V rail (VCC(5V)) on the B-side and a 3.3 V rail (VCC(3V)) on the A-side. This dual-rail topology is the cornerstone feature that enables transparent translation between legacy 5 V peripherals and modern 3.3 V processors, FPGAs, and ASICs. Key features include eight bidirectional channels, ±24 mA output drive on the B-side, low-power CMOS construction, and an operating temperature range from -40 °C to +125 °C. The device accepts input voltages up to 5.5 V on the 5 V side while being powered by a 3.3 V rail, and it supports 3-state outputs that isolate either bus when disabled. The exposed-pad DHVQFN-24 package provides low thermal resistance, supporting sustained heavy drive loads without derating. Technically, the 74LVC4245A uses a wide-bandwidth pass-gate architecture that avoids the direction-switching dead time typical of discrete MOSFET translation circuits. The DIR pin sets the data flow from A to B (HIGH) or B to A (LOW), and the OE pin enables or three-states the outputs. Because the device is non-inverting, the A-side logic level is mirrored directly on the B-side and vice versa, simplifying firmware design. Typical applications include 3.3 V to 5 V bidirectional bus translation in mixed-voltage microcontroller systems, expansion bus isolation between processor and peripheral cards, and legacy interface bridging in industrial control, point-of-sale, and embedded computing platforms. A key design consideration when using this part is that the DIR pin must be driven by the controller that owns the bus, and the OE pin must be toggled to prevent bus contention during direction changes. Decoupling both VCC rails with 100 nF ceramic capacitors placed as close as possible to the IC pins is critical for clean translation at high edge rates. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not aggregated in the manufacturer datasheet.
74SSTUB32868 - 28-Bit to 56-Bit Registered Buffer | TI
The 74SSTUB32868 is a 28-bit to 56-bit registered buffer with address-parity test, designed by Texas Instruments for DDR2 memory modules. It operates at a VCC of 1.7V to 1.9V, making it suitable for low-voltage memory interfaces. The device is available in a 176-ball NFBGA (6x15 mm) package, offering a compact solution for high-density memory modules. A registered buffer is a type of logic device that latches address and control signals to reduce the electrical loading on the memory controller, enabling higher-speed and higher-capacity memory systems. In the hierarchy of memory interface components, the registered buffer sits between the memory controller and the DRAM devices, providing signal buffering and timing alignment. This function is critical in DDR2 and DDR3 modules where signal integrity and timing margins are paramount. Key features include a 1:2 configurable registered buffer topology, which allows one input to drive two outputs, effectively doubling the fan-out for address and control signals. The device also includes address-parity test functionality, which detects parity errors on the address bus, enhancing system reliability. The 176-ball NFBGA package provides excellent thermal and electrical performance, with a compact footprint suitable for space-constrained memory module designs. From a technical perspective, the 74SSTUB32868 uses SSTL_18 I/O standards, compatible with 1.8V memory interfaces. It supports differential clock inputs (CK and CK#) for precise timing, and includes a reset function for initialization. The device is designed to meet JEDEC standards for DDR2 registered DIMMs, ensuring interoperability with standard memory modules. Its low-voltage operation reduces power consumption, making it ideal for power-sensitive applications. Typical applications include DDR2 registered DIMMs, servers, workstations, and networking equipment where high memory capacity and reliability are required. The device is also used in embedded systems that demand robust memory interfaces. Its address-parity test feature is particularly valuable in mission-critical systems where data integrity is paramount. When designing with this device, ensure proper decoupling of the VCC and VDDQ supplies, and follow the layout guidelines in the datasheet to minimize signal skew. The differential clock inputs should be routed with controlled impedance to maintain timing accuracy.
74V2T04STR - Triple Inverter CMOS, SOT-23-8 | STMicroelectronics
The STMicroelectronics 74V2T04STR is a high-speed CMOS triple inverter fabricated in sub-micron silicon gate C2MOS technology with double-layer metal wiring, packaged in an 8-pin SOT-23 (Tape & Reel, STR suffix). It provides three independent single-stage inverting buffers in a single small-outline package, making it a logic-level building block for digital signal inversion in space-constrained designs. Key specifications from the manufacturer datasheet include a typical propagation delay tPD of 4.7 ns at VCC = 5 V, a low quiescent supply current, and balanced output drive capability of |IOH| = IOL = 8 mA minimum at VCC = 4.5 V. A CMOS inverter is the most fundamental building block of digital logic. It accepts a single binary input and produces the complementary binary output: a logic HIGH on the input produces a logic LOW on the output, and vice versa. The 74V2T04 integrates three such inverters into one package, replacing three discrete transistor pairs or three single-inverter packages, thereby reducing board area, BOM count, and propagation skew between channels. As a CMOS device, it sits within the broader hierarchy of logic gates -> combinational logic ICs -> standard logic family -> semiconductor. Key differentiating features include TTL-compatible input thresholds of VIH = 2 V (min) and VIL = 0.8 V (max), which allow direct interfacing with 5 V TTL logic without level translation; power-down protection on inputs that prevents back-feeding current when the device is unpowered; symmetrical output impedance for matched rise and fall times; and balanced propagation delay for predictable timing margins in synchronous paths. The C2MOS silicon-gate process provides inherent low static power dissipation, with quiescent ICC remaining low across the full VCC operating range. The architecture is a classic CMOS inverter pair (p-channel pull-up, n-channel pull-down) replicated three times. Each inverter output stage is sized for the 8 mA balanced drive specification, which is sufficient for driving moderate capacitive bus loads and short PCB traces. The 4.7 ns typical propagation delay at 5 V enables use in clock squaring, reset distribution, and signal buffering applications up to several tens of megahertz. Because all three channels share the same VCC and GND pins, decoupling must be placed close to those pins to suppress switching noise. Typical applications include logic-level inversion and clock buffering in portable and battery-powered devices, signal conditioning between 5 V TTL and 3.3 V CMOS domains, oscillator and crystal-clock signal inversion, watchdog reset pulse generation, and general-purpose glue logic in microcontroller-based embedded systems. The compact SOT-23-8 footprint makes it particularly well suited to hand-held, wearable, and space-constrained consumer designs. When designing with the 74V2T04STR, place a 100 nF ceramic decoupling capacitor as close as possible to the VCC pin, route input and output traces to minimize coupling, and ensure that the load capacitance does not exceed the device's drive capability to maintain the specified propagation delay. Unused inputs must be tied to VCC or GND; floating inputs on a CMOS device can drift to the linear region and cause quiescent current to rise. This page synthesizes distributor pricing, drop-in alternative listings across ST and competing logic families, and practical PCB-level design notes not found in the manufacturer datasheet.
74VHC165FT - 8-Bit PISO Shift Register, 16-TSSOP | Toshiba
The Toshiba 74VHC165FT is an 8-bit parallel-in/serial-out (PISO) shift register built on an advanced high-speed CMOS C2MOS silicon-gate process, offered in a 16-pin TSSOP (TSSOP16B) surface-mount package. It accepts parallel data on one rising or falling shift/load edge and serially shifts it out through Q7 or the complementary Q7' output, supporting clock frequencies up to the device's VHC-rated switching speed across a 2 V to 5.5 V supply range. The wide VCC range makes the part usable in both 3.3 V and 5 V logic families without level translation. A shift register is a sequential logic block that converts parallel data to a serial stream (PISO) or a serial stream to parallel data (SISO/PIPO). In the broader digital hierarchy it belongs to logic ICs → shift registers → CMOS logic → standard logic ICs. PISO shift registers like the 74VHC165FT are commonly used to expand microcontroller GPIO by reporting eight parallel inputs over a single serial pin, reducing board routing complexity in button/keypad scanning, multi-channel ADC front-ends, and display drivers. Key features include eight parallel inputs (D0-D7) with parallel load control (SH/LD'), a clock inhibit pin, asynchronous complementary serial outputs (Q7, Q7'), and standard CMOS low-power dissipation. The 74VHC165FT typically exhibits low quiescent current and high noise margin, making it suited for mixed-signal boards where analog and digital sections must coexist on the same supply. The TSSOP-16B footprint (also referred to as 16-TSSOP) is JEDEC-compliant and pin-compatible with industry-standard 74xx165 logic from other vendors. The architecture uses a master/slave flip-flop chain with asynchronous parallel-load steering logic. When SH/LD' is held LOW, the eight D inputs are asynchronously loaded into the register, overriding any serial activity; when SH/LD' is HIGH, the device shifts on each rising clock edge. The clock-inhibit (CK INH) and serial-data-in (SER) pins allow daisy-chaining multiple 74VHC165 devices for 16-, 24-, or 32-bit input expansion over a single serial line. Typical applications include industrial PLC digital-input modules, keyboard matrix scanners, multi-channel switch-monitor front-ends, LED driver shift chains (when paired with companion PIPO parts), and automotive body-control modules. The wide operating temperature and CMOS noise immunity make it a strong fit for factory-automation and instrumentation. When designing with this device, observe the SH/LD' pulse width (tW) and clock-to-Q propagation delay (tpd) in your timing budget; the asynchronous parallel load is the fastest way to capture a snapshot of the eight inputs but must be glitch-free. Add a small RC on SH/LD' if mechanical switches are wired directly to D inputs. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select and source the 74VHC165FT quickly.
74VHC373MTCX - Octal D-Type Latch, 3-STATE, TSSOP-20 | onsemi
The onsemi 74VHC373MTCX is an advanced high-speed CMOS octal D-type transparent latch with 3-STATE outputs, fabricated with silicon-gate CMOS technology, housed in a 20-pin TSSOP package (MTC suffix). It achieves high-speed operation similar to equivalent bipolar Schottky TTL while maintaining CMOS-class low power dissipation. The device features eight D-type latches with separate latch-enable (LE) and output-enable (OE) controls, configured as an 8-bit transparent latch with non-inverting outputs and high-impedance output capability. A D-type transparent latch is a sequential logic element that captures data on its D inputs when the latch-enable signal is asserted, and holds that data on the Q outputs when LE is de-asserted. The 3-STATE outputs allow multiple devices to share a common bus, controlled by the OE pin. In the broader system hierarchy, the 74VHC373 belongs to the 74VHC logic family of high-speed CMOS logic, itself part of the larger CMOS logic IC family used for glue logic, bus buffering, and address/data demultiplexing in digital systems. Key specifications include a wide 2.0 V to 5.5 V VCC operating range, typical propagation delay of approximately 5 ns at 5 V, low quiescent current, and high output drive capability. The output structure is non-inverting, making it well suited to bus-driving applications where input and output polarities must match. An internal static-guard design provides ESD protection on every input and output pin. Typical applications include address/data bus demultiplexing in microcontroller and microprocessor systems, bus arbitration and bidirectional buffering, register file building blocks, I/O port expansion, and general-purpose storage elements in digital logic designs. The TSSOP-20 footprint makes it attractive for compact, surface-mount assemblies where board space is constrained. When designing with this part, ensure that the OE pin is correctly driven to avoid bus contention when multiple 74VHC373 devices share a common output bus. Decoupling the VCC pin with a 0.1 µF ceramic capacitor placed within a few millimeters of the package is recommended for reliable high-speed operation. This page synthesizes distributor pricing, verified cross-reference drop-in alternatives, and practical design notes beyond what is presented in the manufacturer datasheet.
74VHC373TTR - Octal D-Type Latch, 3-State, TSSOP-20 | STMicroelectronics
The STMicroelectronics 74VHC373TTR is an advanced high-speed CMOS octal D-type transparent latch with 3-state outputs, housed in a 20-pin TSSOP package delivered on Tape & Reel (suffix "TR"). According to the manufacturer datasheet, it features a typical propagation delay of 5.0 ns at VCC = 5 V, a maximum quiescent supply current (ICC) of 4 µA at TA = 25 °C, balanced propagation delays (tPLH ≈ tPHL), symmetrical output impedance of |IOH| = IOL = 8 mA minimum, and high noise immunity (VNIH = VNIL = 28% VCC minimum). It operates across VCC = 2.0 V to 5.5 V, making it directly compatible with both 3.3 V and 5 V logic rails, and is pin- and function-compatible with the legacy 74 series 373 to ease migration paths. A D-type transparent latch, in this product category, is a bistable memory element that captures data on its D input when the latch-enable (LE) pin is asserted HIGH and holds the last captured value when LE is de-asserted LOW. Octal variants integrate eight such latches into a single 20-pin package with a common LE and a common Output Enable (OE), making them ideal for bus-oriented designs where multiple data lines must be captured simultaneously and then tri-stated for sharing with other devices. Latches belong to the broader logic IC family (74-series), which descends from 74xx TTL and has been re-implemented in CMOS, HC, HCT, VHC, and AHC process generations offering progressively lower power and higher speed. The 74VHC373TTR's silicon-gate CMOS fabrication provides improved latch-up immunity over older HC implementations while preserving pin-out equivalence to the 74HC373, 74HCT373, and original bipolar 74373. Power-down protection on the inputs prevents back-drive current when VCC is removed, an essential feature for hot-swap and mixed-voltage systems. The output stage is optimized for balanced drive (8 mA source/sink), allowing direct interface with low-impedance bus lines without external buffers. Typical applications include microprocessor data-bus demultiplexing, address latching for memory expansion (SRAM, DRAM, EPROM), I/O port expansion via 74-series logic, holding registers in DSP pipelines, and bus-isolation between masters and slaves in shared-bus architectures such as the classic 8086/8088 or modern MCU GPIO expansion. When designing with the 74VHC373TTR, ensure that LE and OE timing satisfy the setup (ts) and hold (th) requirements listed in the datasheet's switching characteristics table to avoid race conditions in transparent-latch mode. Avoid leaving inputs floating; tie unused D inputs to VCC or GND through a resistor to prevent unintended ICC rise from floating CMOS gates. This page consolidates distributor pricing, drop-in alternatives, and practical design guidance not found on the manufacturer's product page.
AD5291BRUZ-20 - 20kΩ 256-Position SPI Digital Potentiometer | ADI
The Analog Devices AD5291BRUZ-20 is a single-channel, 256-position digital potentiometer with 20 kΩ end-to-end resistance, nonvolatile memory (NVM) and an SPI serial interface, housed in a 14-pin TSSOP (RU-14) package. According to the ADI AD5291/AD5292 datasheet, this part combines ±1% R-tolerance accuracy with 20-time-programmable (20-TP) memory, allowing wiper settings to be retained through power cycles without an external EEPROM. Headline parameters include 256 tap positions, 20 kΩ nominal resistance, ±1% resistor tolerance, and an SPI-compatible digital interface operating from a single 2.7 V to 5.5 V analog supply plus a 1.7 V to 5.5 V logic supply. A digital potentiometer (often abbreviated digi-pot or RDAC) is a digitally controlled variable resistor that emulates a mechanical potentiometer through a tapped resistor ladder switched by MOSFET transistors. It belongs to the broader category of digital-to-analog converters (DAC) used for resistance, which in turn sits within data-acquisition and signal-conditioning components. Compared to mechanical trimmers, a digi-pot offers remote adjustment, no mechanical wear, and software-controlled calibration. Key features of the AD5291BRUZ-20 include ±1% end-to-end resistance tolerance, a low 5 ppm/°C nominal temperature coefficient, 256 uniform tap points with 5 V/5.5 V single-supply operation, and a 20-time-programmable nonvolatile memory for storing the wiper position through power-down. The part also integrates a hardware RESET pin and software reset command that reloads the most recently programmed 20-TP memory location, plus a power-on refresh circuit that reinitializes the wiper on supply ramp. The internal architecture is a precision thin-film resistor ladder with CMOS transmission-gate switches, driven by an internal RDAC register. A separate 20-bit (AD5291) or 50-bit (AD5292) EEPROM cell stores the user-programmed wiper position. The SPI interface supports daisy-chaining of multiple devices via a dedicated SDO pin, and the logic supply range of 1.7 V to 5.5 V permits direct connection to 1.8 V, 3.3 V, or 5 V microcontrollers without level shifters. Typical applications include programmable gain amplifiers and transimpedance amplifiers, precision reference voltage trimming in instrumentation, audio volume and tone control, LCD display contrast adjustment, programmable filter cutoff and oscillator tuning, and industrial 4–20 mA loop calibration. The TSSOP-14 footprint is friendly to handheld and portable designs where board area is constrained. When designing with this device, observe the absolute maximum analog supply voltage of 6.5 V and keep the logic supply within 1.7 V to 5.5 V. Bypass VDD and VL with 0.1 µF capacitors placed within 5 mm of the supply pins, and reserve a small footprint for an optional 1 µF bulk cap on VDD if the supply is noisy. This page synthesizes distributor pricing, drop-in alternatives sourced from the AD5291 family and competitor cross-reference, and practical design notes not found in the manufacturer datasheet alone, helping engineers select and qualify the AD5291BRUZ-20 faster.
AD96685BR - 2.5ns ECL Comparator | Analog Devices
Analog Devices AD96685BR is an ultra-fast single ECL voltage comparator with 2.5 ns propagation delay, 50 ps propagation-delay dispersion, differential inputs, and complementary open-emitter outputs in a 16-SOIC package. It operates across a -2.5 V to +5 V input common-mode range and produces outputs compatible with ECL 10K and 10KH logic families. A high-speed comparator is a logic-family device that determines whether a differential input voltage is above or below a switching threshold. The AD96685BR belongs to the comparator hierarchy within high-speed logic ICs, where fast edge response, low delay dispersion, and controlled output levels are more important than general-purpose precision or micropower operation. Its differential input stage supports comparison of two rapidly changing signals while limiting sensitivity to common-mode voltage changes. The principal feature of the AD96685BR is its 2.5 ns propagation delay, which supports high-speed timing decisions and pulse detection. Its 50 ps propagation-delay dispersion indicates that delay changes only slightly as input overdrive conditions vary. Complementary ECL outputs provide both true and inverted decisions, while the open-emitter architecture permits use of standard transmission-line terminations. These characteristics make the device suitable for clock recovery, edge detection, high-speed data qualification, and pulse-width discrimination. The AD96685/AD96687 family uses a fast, high-precision differential input stage to maintain consistent propagation delay over its stated input common-mode range. Its outputs can drive transmission lines terminated through 50 ohm resistors to -2.0 V, matching conventional ECL signal-chain practice. Because edge rates are extremely high, trace geometry, termination, grounding, and isolation from adjacent clocks become essential parts of the comparator implementation rather than secondary layout details. Typical applications include clock and data-edge detection in telecommunications equipment, timing recovery in data-conversion systems, pulse discrimination in instrumentation, high-speed thresholding in industrial control, and clock crossing or zero-cross detection in test equipment. The 16-SOIC package provides a practical surface-mount option, although system designers must minimize trace length and control impedance around the high-speed outputs. The principal design trade-off is operating speed versus layout sensitivity. A 2.5 ns decision interval leaves little margin for long traces, poorly terminated outputs, or noisy reference sources. Keep input and output paths short, use suitable ECL termination networks, provide a low-impedance ground reference, and avoid routing adjacent high-speed signals beneath the comparator unless the board stackup provides adequate isolation. This product page combines the manufacturer product designation, lifecycle status, comparator performance figures, termination requirements, package information, and application-focused engineering guidance. It also documents the limits of the available substitution data so engineers can distinguish a verified pin-compatible option from a merely similar high-speed comparator before committing to a board revision.
AD96687BP - 2.5 ns Dual ECL Comparator | Analog Devices
Analog Devices AD96687BP is a dual ultrafast voltage comparator with 2.5 ns propagation delay, 50 ps propagation-delay dispersion, and a latched complementary ECL output stage in a 20-pin PLCC package measuring 9 mm by 9 mm. The device is intended for high-speed precision applications requiring two comparison channels, complementary outputs, and very low delay variation. An ultrafast voltage comparator is a high-speed signal-conditioning integrated circuit that compares two input voltages and produces a logic indication of their relative relationship. Within the broader semiconductor hierarchy, the AD96687BP belongs to the comparator and analog signal-processing family. Its ECL interface and open-emitter outputs are designed for systems in which very fast decision times and controlled output timing are more important than low static power or rail-to-rail input operation. The AD96687BP provides two independent comparator elements, 2.5 ns propagation delay, and 50 ps propagation-delay dispersion. Dispersion describes the change in propagation delay when the input overdrive condition varies. Limiting this variation helps preserve timing consistency in systems that repeatedly compare changing or noisy analog signals. The complementary outputs support both true and inverted decision results, while the latch feature allows the comparison state to be held for downstream logic. The ECL output arrangement uses open-emitter outputs, which provide flexible wired-interface options when pull-up and termination requirements are managed correctly. Open-emitter outputs can support wired-AND behavior and shared pull-up networks, but they do not directly provide a push-pull output. Circuit designers must account for termination, pull-up values, fanout, and signal-integrity behavior when connecting the AD96687BP to downstream ECL logic. Typical uses include high-speed clock or data qualification, pulse-width and edge detection, threshold decisions in instrumentation, and dual-channel decision logic where complementary or latched results are useful. In these applications, the 2.5 ns propagation delay supports rapid signal processing, while the 50 ps dispersion specification provides a quantitative measure of delay consistency under changing overdrive conditions. Layout is critical because a device operating at this speed can be affected by trace length, capacitance, supply return paths, and output termination. Keep connection paths short, place termination and pull-up components close to the relevant pins, and maintain a low-impedance supply distribution structure. Verify operation at the intended supply voltage and with the external termination network specified for the ECL interface. This page consolidates the manufacturer product information, package identification, lifecycle status, technical context, comparison structure, and practical implementation guidance for AD96687BP. It is intended to help engineers distinguish the BP ceramic-package option from other AD96687 package variants and assess whether its dual-channel, latched ECL characteristics fit a precision high-speed design.
AD96687BQ - 2.5 ns Dual Ultrafast ECL Comparator | Analog Devices
The Analog Devices AD96687BQ is an ultrafast dual voltage comparator with 2.5 ns propagation delay, 50 ps propagation-delay dispersion, complementary outputs, and an open-emitter ECL output stage in a 16-pin CERDIP package. The AD96687BQ is marked not recommended for new designs, so it is best suited to maintenance, repair, and qualified legacy systems rather than new product development. A high-speed comparator is a semiconductor component that determines whether an input voltage is above or below a reference threshold and then produces a corresponding logic output. The AD96687 belongs to the comparator hierarchy within analog and mixed-signal integrated circuits. Its dual-channel architecture allows two independent threshold decisions, while its ECL output structure supports high-speed digital signaling in communications, clock, test, and data-conversion systems. The principal performance characteristics are the 2.5 ns propagation delay, 50 ps propagation-delay dispersion, dual-comparator configuration, latch capability, and complementary open-emitter outputs. Propagation delay describes the time between a comparator input transition and the corresponding output response. Propagation-delay dispersion measures how that delay changes with overdrive, making the 50 ps figure useful when assessing decision timing under different input overdrive conditions. The AD96687BQ is identified as a 16-pin CERDIP device and uses an ECL output interface with complementary outputs and open-emitter termination. Open-emitter outputs permit wired-connection and termination techniques commonly used in high-speed logic systems. Exact input-common-mode limits, supply requirements, input offset voltage, input capacitance, output levels, and operating-temperature limits must be confirmed in the Analog Devices data sheet before schematic capture or replacement qualification. Typical uses include high-speed clock recovery, pulse-width qualification, threshold detection, telecom line-interface timing, data-conversion support, and legacy instrumentation. The 2.5 ns delay is the main reason to select this device over slower general-purpose comparators. Open-emitter outputs also make it useful where several outputs must share a common termination or pull-up arrangement, provided the board-level timing and logic-level design is verified carefully. The primary design caution is board-level signal integrity. A 2.5 ns device leaves little timing margin for long traces, excessive loading, poorly terminated interconnects, or slow output rise and fall times. Keep interconnect paths short, use the recommended termination scheme, provide a low-impedance return path, and validate source and termination compatibility with an oscilloscope or high-speed simulation. This product record combines manufacturer device information with practical comparisons, replacement criteria, and design guidance. Because the AD96687BQ is not recommended for new designs and no manufacturer-sanctioned drop-in replacement is identified, engineers should first confirm lifecycle requirements, exact pin compatibility, output logic, supply rails, and timing specifications before approving any substitute for an existing AD96687BQ design.
ADG431BRZ-REEL7 - Quad SPST 24Ohm Analog Switch | Analog Devices
The ADG431BRZ-REEL7 from Analog Devices is a monolithic CMOS analog switch IC containing four independently selectable SPST (single-pole single-throw) switches. Fabricated on the enhanced LC2MOS process, it combines low power dissipation with high switching speed and low on-resistance of 24 ohms maximum. Each switch conducts equally well in both directions when ON and turns on with a logic LOW on its control input. The device is supplied in a 16-pin SOIC package on tape and reel (REEL7) for automated surface-mount assembly. An analog switch IC is a semiconductor device that selectively connects or disconnects an analog signal path under digital control, replacing mechanical relays with faster, smaller, more reliable solid-state switching. Analog switches sit within the broader hierarchy of signal routing components: analog switch, multiplexer/demultiplexer, signal conditioning IC, and mixed-signal semiconductor. The ADG431 belongs to the ADG431/ADG432/ADG433 precision quad SPST family, which differs only in control-input logic polarity. Key features include the 24 ohm maximum on-resistance with low on-resistance flatness, glitch-free switching that suppresses charge-injection transients during state changes, bidirectional signal capability, and an operating temperature range of -40C to +85C for industrial environments. The LC2MOS process merges CMOS logic with linear Bipolar-grade analog capability, delivering fast transition times with microamp-level quiescent power consumption, ideal for battery-operated and high-density designs. Typical applications include audio and video signal routing, data acquisition channel selection, communication-system signal switching, and automated test equipment. Its low on-resistance minimizes insertion loss, while fast switching supports high channel-scan rates in multiplexed ADC front ends. When designing with this part, account for on-resistance-induced attenuation in series with source impedance, and observe supply-voltage limits. Note the active-LOW control logic: if your firmware assumes active-HIGH switching, the ADG432 is the logic-compatible family alternative in the identical SOIC-16 pinout.
ADSP-1410TE/+ - Word-Slice Address Generator | Analog Devices
Analog Devices ADSP-1410TE/+ is a word-slice address generator, a specialized integrated circuit used to generate addresses for systems that expand a smaller memory or peripheral address space. The verified product information identifies the device as a WORD-SLICE ADDRESS GENERATOR and lists Analog Devices as the manufacturer. The available distributor result shows a price of $64.66000 and 31,400 units in stock as of the verified retrieval date, while the DigiKey Marketplace result identifies the part as ADSP-1410TE/+ and provides a manufacturer part number reference of 2156-ADSP-1410TE/+-ND. A word-slice address generator is a specialized address-generation component within the broader hierarchy of digital logic, integrated circuits, and computer-interface or data-acquisition systems. It is used when a system needs address information to be expanded or translated in a structured manner rather than relying only on the address lines of a general-purpose processor. Such devices are associated with high-speed instrumentation, data acquisition, signal processing, and specialized test equipment. The verified web data confirms the product category, manufacturer, commercial availability, and the listed $64.66000 price. It does not provide verified electrical ratings, package dimensions, pin assignments, clock frequency, supply voltage, temperature range, or digital interface details. Those values are therefore not inferred in this product record. The ADSP-1410TE/+ is supplied in bulk according to the distributor listing, but the exact package designation is not supplied in the verified results. The ADSP family is associated with digital signal processing and data-conversion applications, making the ADSP-1410TE/+ relevant to designs requiring deterministic address generation. In an instrumentation system, the device can help organize acquisition, buffer, or peripheral addressing while allowing the host processor to work with a defined address map. Exact timing and interface conclusions require the manufacturer datasheet. Typical design use includes data-acquisition systems, digital signal-processing instrumentation, memory and peripheral address expansion, automated test equipment, and communication or control systems that require specialized address sequencing. The part can be particularly useful where simple binary counting is insufficient and the system requires a dedicated address-generation function. When designing around the ADSP-1410TE/+, verify the complete pinout, electrical limits, interface timing, and package dimensions in the manufacturer documentation before PCB layout. Do not infer pin compatibility from the TE/+ suffix or distributor naming alone. Confirm availability and price directly with an authorized supplier because inventory and pricing can change after the verified retrieval date. This page combines the verified price, stock indication, manufacturer identification, product classification, sourcing links, and engineering caveats with structured selection guidance. It distinguishes verified facts from unavailable technical parameters and avoids presenting generic cross-reference pages as evidence of a true drop-in replacement.
ATF16LV8C-10JC - 10ns 16V8 EECMOS PLD | Microchip Technology
The Microchip Technology ATF16LV8C-10JC is a high-performance 16V8 electrically erasable programmable logic device built on EECMOS technology, with eight macrocells, a 10 ns maximum pin-to-pin delay, and a 20-pin PLCC package measuring 9 x 9 mm. It operates from 3.0 V to 5.5 V and supports both CMOS- and TTL-compatible inputs and outputs. A programmable logic device, or PLD, is a reconfigurable semiconductor used to implement digital logic functions that would otherwise require multiple gates, counters, decoders, or interface circuits. The ATF16LV8C family combines a compact 16V8 architecture with electrically erasable Flash memory, allowing the logic configuration to be programmed or rewritten after manufacture. Its architecture emulates many 20-pin PAL devices and supports registered, combinatorial, and complex logic configurations. The ATF16LV8C-10JC provides 10 ns maximum pin-to-pin delay, corresponding to a stated 83.3 MHz performance figure for the 16V8 architecture. Its eight macrocells provide flexible product-term allocation for combinational and registered functions. CMOS- and TTL-compatible interfaces simplify integration with both modern low-voltage logic families and established TTL-based equipment. Power management is particularly useful in portable or intermittently powered systems. The device offers a pin-controlled power-down mode with a maximum specified current of 5 uA, while typical standby current is 100 nA. These figures help reduce system consumption when the logic does not need to remain continuously active. Typical applications include interface control, decoder and counter logic, industrial control panels, legacy peripheral emulation, glue logic, programmable address decoding, and compact control sequencers. The 20-pin PLCC package supports through-hole assembly and socket-based legacy system maintenance, while its Flash-based configuration supports nonvolatile reusable logic. Designers should verify signal timing against the electrical characteristics for the actual operating voltage and temperature. Unused inputs should not float, power and ground connections should follow the datasheet pin-description table, and programming tools should be checked for device-family support. The ATF16LV8C-10JC is most appropriate when a compact, nonvolatile, 10 ns 16V8 PLD is required in a 20-pin PLCC footprint. This page combines the manufacturer device description, cross-reference findings, package details, and practical engineering guidance to clarify where the ATF16LV8C-10JC fits in legacy control, interface, and programmable-logic systems.
ATF16LV8C-10JI - 10ns 8-Macrocell EE PLD | Microchip Technology
The Microchip Technology ATF16LV8C-10JI is a high-performance EECMOS electrically erasable programmable logic device with 8 macrocells, a 10 ns maximum pin-to-pin delay, and a 20-lead PLCC (J-lead) package. It operates from 3.0 V to 5.5 V, combines approximately 250 gates of logic capacity, and supports CMOS and TTL-compatible inputs. The device is programmed with development software that configures its product-term and output logic architecture for the intended circuit. An EEPLD, or electrically erasable programmable logic device, is a semiconductor that stores a fixed logic configuration in nonvolatile memory. It occupies the level between discrete gates and a field-programmable gate array in the programmable-logic hierarchy. This makes an EEPLD useful when a design needs flexible Boolean logic, several registered outputs, or a configuration that can be changed during development without replacing the device. The ATF16LV8C architecture includes eight macrocells, with each output allocated eight product terms and configurable operating modes selected by the programming software. It emulates many 20-pin PAL devices and incorporates a superset of several common 16R8-style architectures. Pin-controlled power-down can reduce supply current to approximately 5 uA, while typical CMOS standby current is approximately 100 nA. These characteristics make the device suitable for power-conscious control and interface logic. The 10 ns speed grade supports a maximum 100 MHz operating rate in the specified architecture. Operation across 3.0 V to 5.5 V provides compatibility with 3.3 V and 5 V systems, while CMOS- and TTL-compatible inputs simplify interfacing with mixed-voltage logic. The 20-pin J-lead PLCC package is a surface-mount format with a 9 mm by 9 mm body, offering a robust industrial package option rather than a fragile leaded package. Typical uses include industrial control, interface decoding, address decoding, state-machine implementation, display and keypad control, and compact glue logic around microcontrollers or memory devices. The eight macrocells are particularly useful when one or more registered combinational functions must be consolidated into a small, programmable footprint. When laying out the circuit, keep programming-device connections unobstructed and follow the manufacturer's package and termination guidance. Confirm output-drive requirements, unused input states, and supply decoupling for the selected logic levels. Because the device is configuration-dependent, validate the programmed equations and timing in the final system rather than assuming that identical package assignments imply identical behavior across every PLD variant. This product summary combines the ATF16LV8C device architecture, package characteristics, speed grade, and verified replacement information to support design selection. It also identifies the practical constraints that matter when using a small EEPLD in modern embedded systems.
ATF16LV8C-10JU - 10ns 16V8 EECMOS PLD | Microchip
The Microchip Technology ATF16LV8C-10JU is a 10 ns EECMOS erasable programmable logic device with 8 macrocells, 250 product terms, and a 20-pin PLCC package measuring 9 x 9 mm. It operates from 3.0 V to 5.25 V and supports a pin-controlled power-down mode with 5 uA power-down current. A simple programmable logic device, or SPLD, is a semiconductor that combines programmable logic gates, registers, and interconnect resources into a compact package. The ATF16LV8C belongs to the 16V8 architecture within the broader hierarchy of programmable logic devices, PLDs, and digital semiconductors. Its 8 macrocells provide a flexible way to implement combinational and registered control logic, address decoding, state machines, and interface functions without using a large gate array. The ATF16LV8C uses electrically erasable CMOS technology based on proven electrically erasable flash memory. This architecture allows the programmed configuration to be reprogrammed rather than constrained to a one-time mask-programmed implementation. Key characteristics include a 10 ns speed grade, 8 macrocells, 250 product terms, and operation across the 3.0 V to 5.25 V range specified for industrial and commercial temperature grades. A dedicated power-down control option supports systems that need to reduce current consumption when logic activity is not required. The 20-pin PLCC package provides a compact surface-mount form factor with J-leaded connections and a 9 x 9 mm body. Its architecture incorporates a superset of generic 16V8 arrangements and can directly replace the 16R8 family and most 20-pin combinatorial PLD devices when pin, voltage, speed, and logic requirements align. This compatibility makes the ATF16LV8C useful for repairing and redesigning legacy control systems based on GAL-type or 16V8 logic. Typical uses include industrial controller interface logic, state-machine implementations, keyboard or panel decoding, peripheral address decoding, and compact glue-logic functions in embedded equipment. The 10 ns grade is particularly relevant where combinational path timing must be checked against clock and propagation requirements. Designers should still evaluate each product term, macrocell, register, and I/O assignment against the target system rather than assuming every 16V8 device has identical behavior. When designing around the ATF16LV8C-10JU, preserve the 3.0 V to 5.25 V operating range, place decoupling close to the supply pins, and validate every replacement pin against the manufacturer pin description and programming software. For direct substitutions, speed-grade differences can alter timing margins, while different programmable technologies may affect configuration procedures and system behavior. This product page combines manufacturer specifications, verified package and architecture data, drop-in candidate comparisons, and practical selection guidance. It also distinguishes genuine same-footprint replacements from devices that only match functionally, helping engineers shorten legacy PLD repair and redesign cycles without overlooking programming, timing, or package constraints.
ATF16LV8C-10PC 10ns EECMOS PLD | Microchip Technology
Microchip Technology ATF16LV8C-10PC is a 16V8 electrically erasable CMOS programmable logic device with eight macrocells, a 10 ns maximum pin-to-pin delay, and a 20-pin plastic DIP package. It uses electrically erasable flash memory and combines eight outputs, eight product terms per output, and three software-selected operating modes in one reconfigurable logic device. A programmable logic device, or PLD, is a semiconductor that stores a Boolean logic function as a configuration rather than implementing that function in fixed gates. The ATF16LV8C belongs to the simple PLD hierarchy, combining AND-array and OR-array logic resources with a registered output structure. It can replace 16R8-family devices and many 20-pin combinatorial PLDs when the design fits the available eight-output architecture. Key features include a maximum propagation delay of 10 ns, CMOS and TTL-compatible inputs and outputs, a pin-controlled power-down mode with a maximum specified power-down current of 5 microamperes, and typical standby current of 100 nA. Software-selected modes allow the same physical device to implement multiple combinational logic arrangements. The 20-pin DIP package supports conventional through-hole assembly and prototype-board implementation. The ATF16LV8C uses Atmel's EECMOS architecture with electrically erasable flash-memory technology for nonvolatile configuration. This permits a programmed logic function to be retained while allowing the device to be reprogrammed when a design revision changes the implemented equations. Eight product terms are assigned to each of the eight outputs, making the device appropriate for compact combinational control, decoding, and signal-routing functions rather than large sequential systems. Typical applications include industrial control logic, interface decoding, legacy peripheral control, embedded system glue logic, and replacement of small PAL or combinatorial PLD designs. A 10 ns pin-to-pin delay makes the device suitable for control and decoding paths where compact implementation and legacy package compatibility are more important than the density or configuration flexibility of a larger FPGA. When designing around the ATF16LV8C-10PC, verify every input and output assignment against the manufacturer's pin-description table and preserve the required programming-device interface and power conditions. The 10 ns speed grade is important when choosing a replacement because slower members of the same family are not automatically equivalent drop-in choices. This page organizes the manufacturer's architectural details, verified package and speed information, practical application guidance, and replacement constraints into a design-focused reference for engineers maintaining programmable-logic-based equipment.
ATF16LV8C-10PI - 10ns 8-Macrocell EE PLD | Microchip
The Microchip Technology ATF16LV8C-10PI is a 10 ns high-performance EECMOS erasable programmable logic device with eight macrocells, eight outputs, and eight product terms per output in a 20-pin PDIP package. It is based on electrically erasable flash memory and supports pin-controlled power-down at less than 5 µA, with typical standby current of 100 nA. An EE PLD is a programmable logic device whose configuration is stored in nonvolatile memory. The ATF16LV8C combines that reprogrammable configuration with a simple, software-supported architecture based on the 16V8 and 20-pin combinatorial PLD families. Its eight outputs can implement logic functions of increasing complexity through three automatically selected operating modes, allowing a small programmable device to replace several gates, counters, decoders, or state machines. The device provides a maximum pin-to-pin delay of 10 ns, making it appropriate for general-purpose control logic, decoding, address translation, interface adaptation, and fixed-format data processing. Its flash-memory configuration allows the programmed logic to be retained without continuous power. A pin-controlled power-down option can reduce supply current below 5 µA when the device is idle, while the pin-keeper circuits help preserve input states. Each of the eight outputs is allocated eight product terms, and the architecture forms a superset of the generic 16R8 family and most 20-pin combinatorial PLD architectures. CMOS- and TTL-compatible inputs and outputs simplify integration with both modern and legacy digital logic. Software tools select the operating mode automatically from the programmed design, reducing manual configuration complexity. Typical uses include industrial control, legacy peripheral emulation, programmable decode and decode-and-enable functions, simple state-machine implementation, and fixed logic consolidation in compact embedded systems. The ATF16LV8C is particularly useful when a design needs rapid field reprogrammability without replacing a discrete gate network. For a new PCB, preserve the ATF16LV8C-10PI pin assignments and provide suitable supply decoupling and programming access. For an existing design, verify that the replacement has the same 20-pin PDIP footprint, voltage ratings, timing class, and configured power-down behavior. The 10 ns speed grade should be matched carefully against propagation requirements because slower and faster PLDs may require different timing budgets. This product record combines the manufacturer specifications, a complete 20-pin connection view, application guidance, design checks, and package-compatible replacement analysis. It is intended to help engineers identify the correct ATF16LV8C-10PI for industrial programmable-logic designs and to evaluate drop-in options without overlooking timing, package, or lifecycle differences.
ATF16LV8C-10SC - 10ns 16V8 EECMOS PLD | Microchip
The Microchip Technology ATF16LV8C-10SC is a 10 ns, 16V8 electrically erasable CMOS programmable logic device with eight output macrocells, supplied in a 20-pin SOIC package. It operates from a 3 V to 5.5 V supply, supports TTL-compatible inputs and outputs, and includes a pin-controlled power-down option with maximum power-down current of 5 µA. The device combines a superset of the generic 16R8 architecture with compatibility for direct replacement of the 16R8 family and many 20-pin combinatorial PLDs. A simple programmable logic device is a configurable semiconductor that implements digital logic functions through programmed AND/OR product terms. The ATF16LV8C belongs to the broader hierarchy of programmable logic devices, combining the density of a small field-programmable gate array with the simpler architecture of a PAL-style device. Its eight macrocells and configurable operating modes make it useful for compact control, decoding, address translation, interface adaptation, and fixed-format logic consolidation. The primary performance features include a maximum pin-to-pin delay of 10 ns, eight individually allocated macrocells, and eight product terms for each output. Automatic software-configured operating modes allow more complex logic functions without requiring a large gate-array implementation. Low-power operation includes typical 100 nA standby current, while the dedicated power-down control path can reduce current to no more than 5 µA when the circuit does not require continuous logic evaluation. Technically, the ATF16LV8C uses electrically erasable CMOS technology based on the manufacturer's proven flash-memory process. Its architecture emulates many 20-pin PAL devices and supports legacy 16R8 and combinatorial logic conversions. This makes it especially useful for maintaining or repairing equipment whose original mask-programmed or fuse-programmed logic has become difficult to source. Programming still requires the correct logic-development environment and a compatible device programmer. Typical implementations include industrial control logic, decoding and multiplexing networks, keyboard or panel-interface controllers, small peripheral adapters, legacy equipment service replacements, and compact embedded subsystems. Because each output is organized around a macrocell and multiple product terms, the device can consolidate several gates of fixed Boolean logic while preserving predictable propagation delay. The principal design consideration is compatibility. The replacement must use the same 20-pin SOIC footprint, supply voltage, output architecture, and programming method; electrical similarity alone is insufficient for a true drop-in upgrade. Existing schematics and board documentation should be reviewed before programming a substitute, especially when the replacement has a different operating-temperature designation or speed grade. This page combines the manufacturer's device architecture description with cross-reference findings, application guidance, package details, and selection criteria. It focuses on practical replacement planning, programmable-logic architecture, power behavior, and the differences that matter when deciding whether a candidate is genuinely pin-compatible.
ATF16LV8C-10SI - 10ns 16V8 EECMOS PLD | Microchip Technology
The Microchip Technology ATF16LV8C-10SI is a 16V8 electrically erasable programmable logic device in a 20-pin SOIC package. It provides eight macrocells, 10 ns maximum pin-to-pin delay, CMOS- and TTL-compatible inputs and outputs, and a 5 uA maximum pin-controlled power-down mode. The device is based on electrically erasable CMOS technology and is intended for designs requiring compact, reconfigurable combinational logic. An EECMOS PLD is a programmable logic device that stores its configuration in nonvolatile electrically erasable CMOS memory. The ATF16LV8C architecture is a superset of generic 16R8 devices and can implement many 20-pin combinatorial PLD functions. Eight outputs are allocated eight product terms each, while software-selected operating modes support a range of logic structures. This makes the device useful where a small microcontroller would add unnecessary cost and complexity. The ATF16LV8C family supports speed grades down to 10 ns. The -10SI ordering code identifies the 10 ns speed grade in the industrial temperature range, with S indicating the SOIC package and I indicating industrial temperature grade. Typical 100 nA standby operation and the optional low-power mode help reduce system consumption when logic is not continuously required. The device also provides CMOS and TTL-compatible interfaces for mixed legacy and modern digital systems. The ATF16LV8C-10SI is suitable for industrial control, interface decoding, address decoding, glue logic, control-signal generation, and compact peripheral interfacing. It is also appropriate for legacy product revisions where a programmable logic device is preferred over a fixed PAL or when field updates require nonvolatile configuration storage. The manufacturer describes the family as a high-performance EECMOS PLD using proven electrically erasable flash-memory technology. Designers should verify the exact pin assignments, power-supply sequencing, programming interface, and timing constraints in the manufacturer datasheet before laying out a replacement board. The 20-pin SOIC footprint is suitable for conventional surface-mount assembly, but the device is obsolete according to the cross-reference information. For new production, confirm lifecycle status and consider a currently active programmable-logic platform. This product summary combines the manufacturer product information, distributor package and speed details, and cross-reference observations to support engineering selection. It also distinguishes the ATF16LV8C-10SI from related speed, temperature, and packaging variants and records where technical data still requires direct manufacturer confirmation.
ATF16LV8C-10XC - 10ns EECMOS PLD | Microchip Technology
The Microchip Technology ATF16LV8C-10XC is a high-performance EECMOS simple programmable logic device with eight macrocells, a 10 ns maximum pin-to-pin delay, and a 20-pin TSSOP package. It provides eight outputs, with eight product terms allocated to each output, and is designed for compact logic implementations requiring nonvolatile reprogrammable configuration. A simple programmable logic device, or SPLD, is a programmable-logic IC positioned between fixed gate arrays and complex FPGAs. The ATF16LV8C combines combinational logic and registered logic in an electrically erasable CMOS architecture. Its macrocell-based organization supports configurable product-term logic, while flash-memory technology retains the programmed configuration without requiring a separate configuration device. Key features include support for speeds down to 10 ns, a maximum 5 µA pin-controlled power-down current, and CMOS- and TTL-compatible inputs and outputs. The architecture incorporates a superset of the generic 16R8 architecture and can directly replace the 16R8 family and most 20-pin combinatorial PLDs. Its eight macrocells provide a practical implementation path for address decoding, control sequencing, and compact combinational functions. The EECMOS configuration uses electrically erasable flash memory, allowing a design to be reprogrammed without removing the device from the circuit. Eight outputs each receive eight product terms, and three operating modes are selected automatically by configuration software. This combination provides predictable logic mapping in a small 20-pin surface-mount package. Typical uses include industrial control interfaces, peripheral decoding, test-equipment control, legacy 16R8 logic consolidation, and compact address or command decoding. The device can also serve as a temporary or permanent logic bridge in systems where a small programmable function is needed without implementing a larger FPGA or microcontroller peripheral array. Designers should preserve the pin assignment and power-down behavior required by the programmed logic, and they should validate timing against the 10 ns maximum pin-to-pin delay specification. Use the manufacturer pin-description table when assigning PCB tracks and confirm the programmed output mode before applying it to critical control paths. This page summarizes the ATF16LV8C-10XC architecture, package, programming characteristics, drop-in alternatives, comparison parameters, and practical design considerations for engineers evaluating this 20-pin EECMOS PLD.
ATF16LV8C-10XU - 10ns EECMOS PLD | Microchip Technology
The Microchip Technology ATF16LV8C-10XU is an electrically erasable programmable logic device with 8 macrocells, 20 I/O pins, a 10 ns propagation delay, and a 20-pin TSSOP package. It uses EECMOS programmable nonvolatile memory and supports operation from 3.3 V or 5 V supplies. The device is designed for compact control, decoding, glue-logic, and fixed-function replacement applications where reprogrammability and a small footprint are important. An EEPLD, or electrically erasable programmable logic device, is a semiconductor whose logic configuration is stored in nonvolatile memory. Unlike a mask-programmed fixed-function device, an EEPLD can be reconfigured during development or manufacturing. The ATF16LV8C belongs to the broader simple PLD hierarchy: SPLD, programmable logic device, digital logic IC, and semiconductor. Its macrocell-based architecture provides a practical balance between logic density, predictable timing, reprogrammability, and component cost. The ATF16LV8C-10XU provides 8 macrocells, 8 registers, and 20 I/O pins. Each of its eight outputs can be assigned eight product terms, while the device architecture consolidates the functions of generic 16R8 devices and many 20-pin combinatorial PLDs. Programmable operating modes are selected with development software, allowing one device to implement sum-of-products logic, registered outputs, and combinational functions without changing the printed circuit board. The 10 ns speed designation corresponds to a maximum propagation delay of 10 ns under the manufacturer’s specified test conditions. The same family is associated with approximately 250 gates and an 83.3 MHz maximum system frequency. A pin-controlled power-down mode can reduce current to approximately 5 µA, making the device useful in low-activity control panels and portable equipment where standby power is a design constraint. Exact timing and power values should be checked against the manufacturer datasheet for the selected operating voltage and temperature range. Typical uses include industrial control and instrumentation, peripheral interfacing, decoder logic, bus translation, custom reset or alarm logic, and compact embedded control systems. A microcontroller can host the design file and program the ATF16LV8C during production or field updates. The 20-pin TSSOP package also allows the device to occupy less board area than many conventional 20-pin through-hole or larger-surface-mount options. When planning the layout, keep programming and control traces away from sensitive analog or high-speed nets, provide a stable supply and decoupling close to the device pins, and use the manufacturer’s pin-definition table when assigning every signal. Confirm the programming-toolchain version, fuse map, and power-up state before releasing a production design because PLD behavior is determined by the stored configuration as well as the external connections. This page combines the manufacturer’s device positioning, exact ordering information, package details, and verified distribution records with application guidance, drop-in comparison data, and implementation considerations. It is intended to help engineers identify whether the ATF16LV8C-10XU provides the required macrocell count, timing, package, and programming architecture for a specific embedded-logic design.