ATF16LV8C-10XC - 10ns EECMOS PLD | Microchip Technology
MPN: ATF16LV8C-10XC ✗ کۆتایی ژیانATF16LV8C-10XC گشتی
A simple programmable logic device, or SPLD, is a programmable-logic IC positioned between fixed gate arrays and complex FPGAs. The ATF16LV8C combines combinational logic and registered logic in an electrically erasable CMOS architecture. Its macrocell-based organization supports configurable product-term logic, while flash-memory technology retains the programmed configuration without requiring a separate configuration device.
Key features include support for speeds down to 10 ns, a maximum 5 µA pin-controlled power-down current, and CMOS- and TTL-compatible inputs and outputs. The architecture incorporates a superset of the generic 16R8 architecture and can directly replace the 16R8 family and most 20-pin combinatorial PLDs. Its eight macrocells provide a practical implementation path for address decoding, control sequencing, and compact combinational functions.
The EECMOS configuration uses electrically erasable flash memory, allowing a design to be reprogrammed without removing the device from the circuit. Eight outputs each receive eight product terms, and three operating modes are selected automatically by configuration software. This combination provides predictable logic mapping in a small 20-pin surface-mount package.
Typical uses include industrial control interfaces, peripheral decoding, test-equipment control, legacy 16R8 logic consolidation, and compact address or command decoding. The device can also serve as a temporary or permanent logic bridge in systems where a small programmable function is needed without implementing a larger FPGA or microcontroller peripheral array.
Designers should preserve the pin assignment and power-down behavior required by the programmed logic, and they should validate timing against the 10 ns maximum pin-to-pin delay specification. Use the manufacturer pin-description table when assigning PCB tracks and confirm the programmed output mode before applying it to critical control paths.
This page summarizes the ATF16LV8C-10XC architecture, package, programming characteristics, drop-in alternatives, comparison parameters, and practical design considerations for engineers evaluating this 20-pin EECMOS PLD.
جێگرەوەکانی جێگۆڕکێ بۆ ATF16LV8C-10XC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ATF16LV8C-10XC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Device Type, Power-Down Current, Maximum Pin-to-Pin Delay, Product Terms per Output.
ATF16LV8C-10XI
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ATF16LV8C-10XU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATF16V8C-5XC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATF16V8C-7XU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATF16LV8C-10XC
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ATF16LV8C-10XC زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | 16V8 electrically erasable CMOS simple programmable logic device |
| Programmable Logic Type | EEPLD with EECMOS architecture |
| Configuration Memory Technology | Electrically erasable flash memory |
| Number of Macrocells | 8 macrocells |
| ژمارەی دەرچووەکان | 8 outputs |
| Product Terms per Output | 8 product terms |
| Maximum Pin-to-Pin Delay | 10 ns |
| Equivalent Gate Capacity | 250 gates |
| زۆرترین فرێکوێنسیی کاتژمێر | 83.3 MHz |
| Supply Voltage Range | 3 V to 5.5 V |
| Pin-Controlled Power-Down Current | 5 µA maximum |
| Typical Standby Current | 100 nA |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| پاکێج | 20-pin TSSOP |
| Package Dimensions | 4.5 mm width x 6.6 mm length x 1.05 mm height |
| جۆری دامەزراندن | Surface mount |
| Logic Architecture Compatibility | Direct replacement for 16R8 family and most 20-pin combinatorial PLDs |
| Operating Modes | 3 automatically configured operating modes |
ڕێنمایی ڕێکخستنی پینی ATF16LV8C-10XC 4.5 mm width x 6.6 mm length x 1.05 mm height
ڕێکخستنی پین بۆ ATF16LV8C-10XC (پاکێجی 4.5 mm width x 6.6 mm length x 1.05 mm height). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ATF16LV8C-10XC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ATF16LV8C-10XC گونجاوە بۆ 6 بەکارھێنانs: Address Decoding, Industrial Control Sequencing, Peripheral Interface Control, Legacy 16R8 Consolidation, Test Equipment Control, Low-Power Standby Control.
Address Decoding
The ATF16LV8C-10XC fits compact address-decoder designs because it provides eight outputs with eight product terms allocated to each output. Each macrocell can be configured through the programming software to implement a required decode equation, allowing several chip-select or region-select functions to be consolidated without a larger FPGA. The 10 ns maximum pin-to-pin delay should be compared with the address-to-enable timing budget, while the 20-pin TSSOP package keeps the implementation compact. Because the device is obsolete, an existing installation can be maintained without redesign when the programmed configuration and pinout remain unchanged.
پێشنیارکراو
Industrial Control Sequencing
The ATF16LV8C-10XC is useful in legacy industrial-control boards where a small amount of deterministic combinational or registered logic must be retained during modernization. Its eight macrocells can implement interlocks, command enables, and sequencing conditions, while EECMOS flash configuration permits updates without socketed programming tools. The 3 V to 5.5 V operating range supports common logic-rail environments, and the 20-pin TSSOP format simplifies repair-board integration. Confirm the exact temperature grade, output-mode configuration, and system timing before using it in newly qualified production equipment.
پێشنیارکراو
Peripheral Interface Control
The ATF16LV8C-10XC can serve as a compact interface controller between an older bus arrangement and discrete control logic. Eight configurable outputs with eight product terms each provide enough capacity for device-select generation, write qualification, interrupt masking, and command decoding. Its electrically erasable flash configuration makes field updates practical, while the maximum 10 ns pin-to-pin delay supports designs whose timing requirements are not more aggressive. Check whether registered outputs are required and ensure that the programmed polarity and power-down state match the peripheral interface.
پێشنیارکراو
Legacy 16R8 Consolidation
The ATF16LV8C-10XC is specifically positioned for designs moving away from generic 16R8-family devices and certain 20-pin combinatorial PLDs. Its architecture is described as a superset of the generic 16R8 architecture, and eight outputs with eight product terms each provide implementation flexibility. This makes the device appropriate for consolidating small decode and control functions on repair or modernization boards. Pin compatibility must still be checked at the schematic level because package presence alone does not establish identical pin functions, and the configured operating mode must match the original circuit.
پێشنیارکراو
Test Equipment Control
The ATF16LV8C-10XC can implement deterministic control logic in test equipment where sequence generation, fixture selection, or measurement-state gating is required. Eight macrocells provide a practical balance between functional capacity and board area, while the 20-pin TSSOP package simplifies dense instrument control boards. The 10 ns maximum pin-to-pin delay is relevant to fixture timing, and the low-power shutdown option can reduce consumption when a measurement section is inactive. Validate output behavior during configuration, power-up, and power-down transitions because deterministic test systems can be sensitive to transient control states.
پێشنیارکراو
Low-Power Standby Control
The ATF16LV8C-10XC suits small control blocks that must retain a programmed configuration while spending little power between operating events. Its pin-controlled power-down mode provides a maximum specified current of 5 µA, and the family documentation describes a typical 100 nA standby condition. An engineer can assign low-impact wake, alarm, or monitoring functions to the programmable outputs without continuously powering a larger controller. Ensure that every load remains compatible with the output state during standby and that the power-down pin cannot float in the final board design.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ATF16LV8C-10XC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ATF16LV8C-10XI | ATF16LV8C-10XU | ATF16V8C-5XC | ATF16V8C-7XU |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TSSOP-20 | TSSOP-20 | TSSOP-20 | TSSOP-20 | TSSOP-20 |
| Programmable Logic Type | EEPLD | EEPLD | EEPLD | EEPLD | EEPLD |
| Number of Macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Speed | 10 ns | 10 ns | 10 ns | 5 ns | 7 ns |
جیاکەرەوە سەرەکییەکان
- Direct 16R8-family replacement positioning (بەراورد بەATF16V8C-5XC)
- 10 ns timing with eight macrocells (بەراورد بەATF16V8C-7XU)
- Flash-based electrically erasable configuration (بەراورد بەATF16LV8C-15SC)
تێبینییەکانی دیزاین
Do not treat a shared TSSOP-20 outline as proof of electrical compatibility. Compare every pin in the manufacturer pin-description tables, especially configuration, clock, feedback, and power-down functions, and confirm whether the programmed output mode is combinational or registered. The target is listed as obsolete, so a replacement should be validated for logic behavior, setup and hold timing, power-down state, and programming-file compatibility rather than accepted solely by package dimensions.
Route the 20-pin TSSOP footprint according to the package drawing and place decoupling and pull-up or pull-down components close to their associated power and control pins. The device accepts CMOS- and TTL-compatible signals, but unused inputs should not be left floating. Review every output net for power-up and power-down behavior so that disabled peripheral chips are not exposed to an unintended command or selection pulse.
Use the 10 ns maximum pin-to-pin delay as a system-level constraint rather than only a device rating. Include output loading, board-trace propagation, receiver setup and hold requirements, and any skew between related outputs. If the replacement has a 5 ns or 7 ns speed designation, verify that faster transition edges do not create ringing, additional EMI, or incompatible timing assumptions in the surrounding circuit.
Decouple the supply pins according to the manufacturer layout guidance and account for both operating current and the pin-controlled power-down state. The specified maximum power-down current is 5 µA, while a typical standby condition of 100 nA is described for the family. Confirm that the external circuit can tolerate the selected output state and that no pull resistor prevents the device from reaching its intended low-power condition.
زانیاری پابەندبوون
The ATF16LV8C is a general-purpose logic IC rather than an automotive-qualified device. Specific environmental and material compliance declarations were not identified for this exact ordering code.