بەرهەمەکان (260+)

AS3991-BQFT - UHF RFID Single Chip Reader 840-960MHz | ams
AS3991-BQFT

AS3991-BQFT - UHF RFID Single Chip Reader 840-960MHz | ams

The ams OSRAM AS3991-BQFT is a single-chip UHF RFID reader IC integrating an analog front end and full EPC Class 1 Gen 2 (ISO 18000-6C) protocol handling for 840 MHz to 960 MHz operation, housed in a 64-VFQFN package with exposed pad and supplied in tape and reel packaging. A UHF RFID reader chip is the radio-side heart of an RFID interrogator: it generates the 860-960 MHz carrier, amplifies and transmits interrogator commands, receives the weak backscatter signal from passive tags, and demodulates it into digital data. In the system hierarchy, it sits below complete RFID reader modules and above discrete RF building blocks, combining PA driver, low-noise receiver, PLL synthesizer, and protocol engine in one semiconductor device. Key features include read/write support for ISO 18000-6C tags, a wide 840-960 MHz frequency range covering all regional UHF RFID bands (ETSI 865-868 MHz, FCC 902-928 MHz, and Asian bands), built-in programming options for protocol parameters, and lead-free, RoHS-compliant construction. The integrated protocol handler offloads dense tag-population work such as Q-algorithm anti-collision from the host processor. Technically, the AS3990/AS3991 family integrates the complete analog transmit and receive chain with a flexible digital interface so an external microcontroller only manages higher-level inventory logic. The AS3991 variant adds enhanced system integration options over the AS3990 within the same 64-QFN footprint, enabling shared PCB design across the family. Typical applications include fixed UHF RFID portals and gates for warehouse logistics, handheld and portable RFID readers, and industrial asset-tracking systems where EPC Gen 2 compliance and multi-regional frequency coverage are mandatory. Design-wise, the exposed pad of the 64-VFQFN must be soldered to a solid RF ground plane, and the PA output matching network must be tuned for the target regional band to maximize read range and meet regulatory emission masks. This page synthesizes distributor sourcing data, drop-in same-family alternatives, and practical design notes not found in a single manufacturer document.

RFQ پەیوەندی
ATNMI5325AA - Wi-Fi RF Transceiver Module + MCU | Microchip
ATNMI5325AA

ATNMI5325AA - Wi-Fi RF Transceiver Module + MCU | Microchip

The Microchip Technology ATNMI5325AA is an RF transceiver module integrating a Wi-Fi radio transceiver with a microcontroller (IC RF TXRX+MCU WIFI), designed to provide robust wireless connectivity in demanding environments. It belongs to Microchip's RF Transceiver Modules and Modems product family and is categorized by distributors as a Wi-Fi transceiver module. A Wi-Fi transceiver module is a complete radio subsystem that combines the RF front end, baseband/MAC processing, and often an embedded MCU on a single certified module. In the system hierarchy it sits above discrete RF chips: semiconductor -> RF IC -> transceiver -> module. By offloading wireless connectivity from the host processor, such modules shorten design cycles and simplify regulatory certification for Wi-Fi products. Key characteristics of the ATNMI5325AA include its integrated transceiver-plus-MCU architecture, surface-mount module construction for automated assembly, and operation in the industrial and consumer wireless connectivity space. Distributor listings (DigiKey, Microchip USA, ichome) consistently describe it as a high-performance RF transceiver module for robust Wi-Fi communication and seamless data transfer in IoT devices, smart home products, and industrial electronics. Technically, an integrated TXRX+MCU module runs the Wi-Fi protocol stack on the on-board microcontroller, communicating with a host system over a standard interface such as UART/SPI (per the manufacturer datasheet). Integration of the MCU removes the need for a separate connectivity coprocessor in many designs, reducing board area and bill-of-materials count. Typical applications include IoT sensor nodes and gateways, smart home appliances, and industrial equipment requiring cable-free network links. Design considerations: verify antenna layout, keep-out zones, and supply decoupling exactly as specified in the Microchip datasheet, since module RF performance depends strongly on the surrounding PCB. This page synthesizes distributor listings, availability signals, and sourcing context for the ATNMI5325AA that are not consolidated in any single manufacturer document.

RFQ پەیوەندی
ATREB231FE2-EK - 2.4GHz Transceiver Eval Kit | Microchip
ATREB231FE2-EK

ATREB231FE2-EK - 2.4GHz Transceiver Eval Kit | Microchip

The Microchip Technology ATREB231FE2-EK is a 2.4 GHz radio transceiver evaluation board for the AT86RF231 IEEE 802.15.4 transceiver, featuring an integrated SiGe front-end module (FEM) for extended link budget, supplied as a complete evaluation kit (EK) for RF performance testing and firmware development. An RF evaluation board is a hardware development tool that mounts a target integrated circuit - in this case a 2.4 GHz ZigBee/IEEE 802.15.4 radio transceiver - together with its mandatory RF matching network, antenna structures, power decoupling, and debug connectors on a ready-to-use printed circuit board. Evaluation boards sit within the development-tools hierarchy alongside starter kits, extension boards, and reference designs, and they allow engineers to characterize RF performance before committing to a custom PCB layout. Key features include the AT86RF231 2.4 GHz transceiver supporting IEEE 802.15.4 / ZigBee PHY operation, a SiGe front-end module that boosts transmit power and receive sensitivity for extended-range links, and an evaluation-board form factor intended to mate with Microchip AVR microcontroller platforms for rapid prototyping. Technically, the AT86RF231 integrates the 2.4 GHz radio, the PHY layer modem, and an SPI-controlled interface to a host MCU, reducing the external component count of a ZigBee node to the transceiver, a crystal, an antenna, and an MCU. The added SiGe FEM stage increases output power beyond the bare transceiver level, enabling coverage of larger homes, buildings, and industrial floors where link margin is critical. Typical applications include 2.4 GHz IEEE 802.15.4 / ZigBee mesh network prototyping, RF range and sensitivity testing with front-end amplification, and early firmware development for smart-home, building-automation, and industrial wireless sensor nodes. For design evaluation, connect the board to a supported Microchip AVR host controller or debugger, use the vendor software framework for radio driver validation, and conduct range tests in both line-of-sight and obstructed environments to quantify the FEM link-budget benefit. This page synthesizes distributor availability, related evaluation-kit alternatives, and practical development guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
ATSAMR21G18A-MUT - 2.4GHz 802.15.4 SoC MCU | Microchip
ATSAMR21G18A-MUT

ATSAMR21G18A-MUT - 2.4GHz 802.15.4 SoC MCU | Microchip

The Microchip ATSAMR21G18A-MUT is an IEEE 802.15.4-compliant single-chip wireless SoC that integrates an ARM Cortex-M0+ 32-bit microcontroller with a best-in-class 2.4 GHz RF transceiver, packaged in a 48-pin VFQFN (6% FAKFP) with exposed thermal pad. It delivers 256 KB Flash, 32 KB SRAM, a 48 MHz maximum CPU clock, and 2.46 CoreMark/MHz efficiency. The integrated radio achieves a 103 dB link budget while consuming 50% less active current than competing solutions, making it well-suited for low-power IEEE 802.15.4, ZigBee, and proprietary 2.4 GHz wireless nodes. An SoC (System-on-Chip) wireless radio combines an application processor and RF transceiver on a single die, reducing BOM count, PCB area, and BOM-driven failure modes versus two-chip MCU+radio designs. As a member of the SAM R21 family, the ATSAMR21G18A belongs to the broader 32-bit ARM Cortex-M0+ microcontroller hierarchy (ARM Cortex-M0+ -> Cortex-M0 family -> ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor). This category also spans wireless SoCs, RF transceivers with embedded MCUs, and short-range wireless controllers used in Thread, ZigBee, and ZigBee PRO mesh networks. Key differentiating features include a hardware 128-bit AES crypto engine, a 32-bit MAC symbol counter for IEEE 802.15.4 security, automatic transmission modes that offload the CPU, an integrated temperature sensor, and pin-compatible migration paths to the SAM D21 family. The wide 2.5 V to 3.3 V operating range and ultra-low sleep currents extend battery life in energy-harvesting or coin-cell designs. Typical applications include IEEE 802.15.4 sensor networks, ZigBee home-automation nodes, smart-metering endpoints, industrial wireless sensor nodes, and proprietary 2.4 GHz point-to-point links. The SAM R21 family is supported by the Atmel/Microchip Studio IDE, ASF, and a CMSIS-Pack so designers can leverage existing SAM D21 code and peripheral libraries for faster time-to-market. When designing with this device, ensure proper RF layout: place the antenna-matching network as close to the RF pins as possible, use a continuous ground plane under the RF section, and follow the Microchip application note on PCB layout for 2.4 GHz radios. Programming is supported through SWD with Atmel Studio or third-party toolchains such as Keil and IAR. This page synthesizes distributor pricing, drop-in compatible package variants, design notes, and application guidance for the ATSAMR21G18A-MUT not consolidated on the manufacturer product page.

RFQ پەیوەندی
AW611 - Wi-Fi 6 + Bluetooth 5.4 Automotive Combo IC | NXP
AW611

AW611 - Wi-Fi 6 + Bluetooth 5.4 Automotive Combo IC | NXP

The NXP Semiconductors AW611 (AW611HN) is a highly integrated 2.4/5 GHz dual-band 1x1 Wi-Fi 6 (802.11ax) and Bluetooth/Bluetooth Low Energy 5.4 single-chip combo solution optimized for the automotive market with automotive qualification (AEC-Q100 Grade 3 per the AW611 product brief). A Wi-Fi/Bluetooth combo IC is a radio-frequency transceiver that integrates two short-range wireless protocols on one die, sitting inside the broader hierarchy of wireless connectivity ICs: RF transceiver -> connectivity combo IC -> automotive ECU electronics. Combining both radios reduces system cost, board area, and the external bill of materials compared to discrete two-chip designs. Key features include dual-band operation across the 2.4 GHz and 5 GHz ISM bands, Wi-Fi 6 (802.11ax) OFDMA-based 1x1 connectivity for improved efficiency in congested RF environments, and Bluetooth 5.4/Bluetooth LE 5.4 for low-power beaconing and sensor links. Internal Wi-Fi and Bluetooth radios achieve efficient coexistence, and a dedicated interface supports coexistence arbitration with external radios, which is essential in dense automotive electronic control units with multiple concurrent wireless systems. On the host interface side, the AW611 connects to the host processor via SDIO 3.0 for Wi-Fi and SDIO or UART for Bluetooth, matching the interface mix found on automotive infotainment SoCs and telematics controllers from suppliers such as NXP and Renesas. Typical applications include in-vehicle infotainment (IVI) head units, telematics control units (TCU), two-wheeler connectivity, and other automotive ECUs requiring certified wireless connectivity. The automotive qualification makes it suitable for extended-temperature in-cabin and near-cabin environments. Designers should verify thermal management, antenna matching, and RF coexistence layout early: keep the combo IC antenna feed short, follow the manufacturer layout guidelines, and plan module integration versus chip-down placement based on production volume. This page synthesizes verified manufacturer data, distributor availability signals, and practical design notes not found in the manufacturer product brief.

RFQ پەیوەندی
AWR2188 - 8RX/8TX 76-81GHz FMCW Transceiver | Texas Instruments
AWR2188

AWR2188 - 8RX/8TX 76-81GHz FMCW Transceiver | Texas Instruments

The Texas Instruments AWR2188 is a single-chip, cascadable FMCW transceiver operating in the 76GHz to 81GHz band, featuring 8 receive (RX) and 8 transmit (TX) channels with launch-on-package (LoP) technology. This device integrates a complete radar front-end, including RF synthesizer, mixers, and baseband filters, in an extremely small form factor, enabling high-resolution automotive radar systems. A radar transceiver is a device that both transmits and receives radio frequency signals to detect objects and measure their distance, velocity, and angle. In automotive radar, FMCW (Frequency-Modulated Continuous Wave) transceivers are essential for advanced driver-assistance systems (ADAS) and autonomous driving, as they provide robust object detection in all weather conditions. The AWR2188 sits at the top of the radar signal chain, converting RF signals to digital data for processing by a host MCU or DSP. Key features include 8TX/8RX channels for high angular resolution, cascadable architecture for multiple-device synchronization, and LoP technology that eliminates the need for external antenna packaging, reducing system cost and size. The device supports a wide frequency range of 76-81GHz, enabling both long-range and short-range radar applications. It also includes built-in self-monitoring and calibration features for reliable operation. Technically, the AWR2188 integrates a fractional-N PLL, multiple ADC channels, and a digital signal processing chain. The cascadable interface allows multiple devices to be synchronized for a larger virtual antenna array, improving angular resolution. The LoP package integrates the antenna on the package itself, simplifying PCB design and reducing signal losses. The device operates from a 1.8V core supply and includes multiple power management features. Typical applications include automotive radar for adaptive cruise control, autonomous emergency braking, and blind-spot detection. It is also used in industrial radar for level sensing and motion detection. The high integration and small form factor make it ideal for space-constrained designs. When designing with the AWR2188, ensure proper power supply decoupling and thermal management, as the device dissipates significant power during operation. The cascadable interface requires careful clock synchronization for multi-device systems.

RFQ پەیوەندی
BAP65-02,115 - 30V 100mA PIN Diode SOD-523 | NXP | RF Switch
BAP65-02,115

BAP65-02,115 - 30V 100mA PIN Diode SOD-523 | NXP | RF Switch

The NXP Semiconductors BAP65-02,115 is a planar silicon PIN diode rated for 30 V reverse voltage, 100 mA forward current, and 715 mW power dissipation, housed in the ultra-small SOD-523 surface-mount plastic package. It is supplied in tape-and-reel format (7-inch reel, 3000 pieces minimum). A PIN diode is a special class of semiconductor diode with a wide, lightly doped intrinsic (I) region sandwiched between the P-type and N-type regions. In the RF domain, the PIN diode functions as a current-controlled RF resistor: under forward bias its RF resistance varies nearly linearly with DC bias current, while under reverse bias it behaves as a small, nearly constant capacitance. This makes PIN diodes the workhorse switching and attenuating elements in the RF front-end hierarchy of wireless transceivers, sitting alongside RF switches, RF amplifiers, and antenna systems. Key features of the BAP65 family include high breakdown voltage for a small-footprint PIN diode, low diode capacitance for minimal insertion loss, low forward resistance for low on-state loss, and very low series inductance thanks to the SOD-523 package construction. According to the NXP product data sheet, the BAP65-02 is described as a high-voltage, current-controlled RF resistor optimized for RF switch applications. The planar construction delivers consistent, well-controlled capacitance and resistance values across production lots, which is critical for matching in multi-throw antenna switch banks. The small 1.2 mm x 0.6 mm SOD-523 footprint allows dense placement directly at antenna ports or filter nodes, keeping parasitic loops short at GHz frequencies. Typical applications include antenna switching in mobile and IoT transmitters, transmit/receive switching in short-range radios, RF attenuator circuits, and protection/biasing networks in RF front-end modules. Its 30 V rating gives headroom for switching relatively high RF swing signals. Design consideration: PIN diode RF resistance scales with forward bias current, so the driver circuit must supply a stable, well-filtered DC bias; inadequate bias current raises insertion loss and distortion. This page adds value beyond the NXP datasheet by consolidating distributor pricing, drop-in alternatives, comparison tables, and practical RF layout notes for the BAP65-02,115 in one AI-citable reference.

RFQ پەیوەندی
BC63B239A04-AQK-E4 - Bluetooth v2.1+EDR Class 1 TxRx+MCU, 40-QFN
BC63B239A04-AQK-E4

BC63B239A04-AQK-E4 - Bluetooth v2.1+EDR Class 1 TxRx+MCU, 40-QFN

The Qualcomm (formerly CSR) BC63B239A04-AQK-E4 is a Bluetooth v2.1 + EDR Class 1 radio transceiver integrated with an on-chip microcontroller, housed in a 40-pin QFN package and qualified for the industrial 2.4 GHz ISM band. Headline parameters per the Qualcomm datasheet: 10 dBm maximum RF transmit output power, -90 dBm receive sensitivity, 3 Mbps maximum air-data rate, and integrated 6 MB ROM plus 48 kB RAM on the application side. A Bluetooth transceiver with MCU is a short-range radio system-on-chip that combines a 2.4 GHz physical-layer radio (Bluetooth core spec v2.1 + EDR) with a microprocessor and embedded memory. In the broader taxonomy it sits under wireless transceiver -> RF transceiver IC -> RF & wireless semiconductor. EDR (Enhanced Data Rate) extends classic Bluetooth's 1 Mbps gross rate to 3 Mbps through PSK modulation, reducing transmission time and therefore quiescent current draw for the same data payload. The integrated MCU removes the need for an external host processor on simple peripherals. Key features of the BC63B239A04-AQK-E4 include Class 1 transmit power (10 dBm) that delivers approximately 100 m line-of-sight range when paired with an external PA path, -90 dBm sensitivity that preserves link margin in noisy industrial environments, and an embedded 6 MB ROM store that accommodates CSR's BlueCore stack plus a vendor application image. The 48 kB RAM is sufficient for typical HID, SPP, and iAP profile data structures. Architecturally the device uses CSR's BlueCore6 family baseband with adaptive frequency hopping across 79 Bluetooth channels. Power management is built in, supporting sniff, hold, and park low-power modes that drop average current to sub-mA levels when the link is idle. Antenna interface is single-ended 50 ohm on a dedicated RF pin. Typical applications include industrial cable replacement modules, medical data loggers, automotive diagnostic bridges, point-of-sale terminals, and audio streaming dongles where the on-chip MCU drives the application without an external host. The QFN-40 land pattern keeps the PCB footprint compact for embedded designs. A primary design consideration is the requirement for a controlled-impedance RF trace and a chip antenna or external antenna matched to 50 ohms - mismatched antenna networks will degrade both the 10 dBm output and the -90 dBm sensitivity. Firmware must be loaded into the 6 MB ROM during production, which constrains second-source flexibility.

RFQ پەیوەندی
BC66F3663 - Sub-1GHz OOK/GFSK Transceiver Flash MCU | Holtek
BC66F3663

BC66F3663 - Sub-1GHz OOK/GFSK Transceiver Flash MCU | Holtek

The Holtek Semiconductor BC66F3663 is a Sub-1GHz OOK/GFSK transceiver Flash MCU, integrating an RF transceiver and a Flash-based microcontroller in a single 46-pin QFN-A package. The device targets short-range and medium-range wireless links in the Sub-1GHz ISM bands with both OOK and GFSK modulation support. A Sub-1GHz transceiver SoC (System-on-Chip) is a class of wireless IC that combines a low-power radio transceiver with a microcontroller and memory on one die. In the power-management and connectivity hierarchy, it sits above discrete RF transceiver ICs (which require an external MCU) and below complete certified RF modules, offering designers an intermediate level of integration for proprietary wireless protocols. Key characteristics of the BC66F3663 include single-chip integration of the RF transceiver and Flash MCU, dual modulation support (OOK for maximum range and simplicity, GFSK for higher noise immunity and data rates), and operation across Sub-1GHz frequency bands. Holtek states that the BC66F3653 and BC66F3663 provide enhanced anti-interference ability and improved transmission range compared with earlier family members. The device family includes the BC66V3663, which is the OCDS (On-Chip Debug System) EV chip of the BC66F3663 and provides dedicated OCDSDA and OCDSCK pins for development and emulation. Pin-shared functions on the QFN-A package are determined by corresponding software control bits, allowing flexible peripheral mapping per the manufacturer datasheet. Typical applications include wireless remote controls, smart-home sensor nodes, security and alarm systems, and industrial telemetry links operating in Sub-1GHz license-free bands, where long range and low power favor Sub-1GHz over 2.4GHz solutions. An important design consideration: this device has been formally End-Of-Life'd. Holtek's EOL notification gives a latest purchase date of October 25, 2025, so new designs should evaluate the recommended replacement device from the EOL cross-reference schedule before committing. This page synthesizes the EOL notification, datasheet package information, drop-in alternative analysis, and sourcing guidance not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
BCM43217KMLG - 2x2 802.11n RF Transceiver | Broadcom
BCM43217KMLG

BCM43217KMLG - 2x2 802.11n RF Transceiver | Broadcom

Broadcom BCM43217KMLG is an ultimate low-cost, single-band 2x2 802.11n RF transceiver integrated into a QFN package. The device combines a two-transmit, two-receive radio configuration with an 802.11n-compliant WLAN interface in one compact component. Its QFN construction is intended for space-constrained wireless equipment where PCB area and manufacturing compatibility are important design constraints. An RF transceiver is the radio-frequency section of a wireless system. It converts transmitted data into RF signals and converts received RF signals back into digital data. A 2x2 radio provides two spatial transmit and receive paths, while 802.11n defines the wireless networking standard implemented by the associated WLAN system. These devices sit between the baseband or host processor and the antennas in a complete connected product. The principal product attributes visible in manufacturer and distributor documentation are its 2x2 radio configuration, single-band operation, 802.11n support, low-cost positioning, and QFN package. The QFN format supports compact board layouts, but its exposed thermal and electrical features require careful land-pattern design. The Broadcom family designation identifies BCM43217 as the product series and KMLG as the ordering variant. The BCM43217KMLG is positioned for cost-sensitive embedded WLAN equipment in which a single-band 802.11n connection is sufficient. Unlike a dual-band solution, it does not provide separate radio paths for multiple frequency bands, so system planners should select it only where one supported band satisfies the regional and application requirements. Its 2x2 configuration can support higher spatial-stream throughput than a 1x1 radio when the host, antenna system, channel conditions, and client support the full capability. Typical implementation environments include embedded access points, wireless routers, range extenders, industrial wireless gateways, connected appliances, and embedded OEM modules. Host integration also requires suitable crystal, power-supply, antenna, and RF routing arrangements. Because the exact frequency band, pinout, electrical limits, and operating-temperature limits are not stated in the accessible product records, those details must be confirmed in the manufacturer datasheet before schematic release. The primary design consideration is PCB compatibility. Confirm the exact KMLG land pattern, pin assignments, exposed-pad connection, and recommended antenna network against the manufacturer datasheet. Preserve the RF layout geometry and keep the antenna feed path free of unnecessary copper and high-current switching nodes. Prototype the power network and antenna matching because package choice alone does not guarantee RF performance. This page consolidates the exact product identity, package format, wireless configuration, sourcing context, comparison information, and practical integration considerations for BCM43217KMLG. It also distinguishes the documented KMLG ordering variant from the closely related BCM43217TKMLG family member while directing critical engineering decisions to the Broadcom manufacturer datasheet.

RFQ پەیوەندی
BCM43465SAP01 - Dual Wireless Connectivity SoC | Broadcom
BCM43465SAP01

BCM43465SAP01 - Dual Wireless Connectivity SoC | Broadcom

Broadcom BCM43465SAP01 is a system-on-chip wireless connectivity solution integrating a BCM49408 processing core with two BCM43465 connectivity blocks. The Broadcom listing identifies the device as a System On Chip (SoC) designed for high-performance wireless networking applications, with architecture designed to support demanding communication protocols. A system-on-chip, or SoC, is an integrated semiconductor that combines multiple functional blocks on one device. Within the broader hierarchy of semiconductor and embedded processing devices, an SoC can integrate processing, connectivity, memory interfaces, security functions, and communication peripherals. This consolidation reduces the number of separate components required in a connected product while supporting compact, high-performance wireless equipment. The BCM43465SAP01’s defining feature is its dual BCM43465 wireless connectivity implementation. The associated Broadcom product information identifies the configuration as BCM49408 plus BCM43465 times two. This architecture is suited to wireless networking infrastructure and other embedded connectivity designs that require substantial radio integration and processing capability in a single component. Its exact radio bands, antenna interfaces, modulation formats, and throughput ratings require confirmation from the manufacturer’s controlled technical documentation. The BCM49408 processing core provides the computational foundation for the connectivity blocks, allowing protocol handling and wireless functions to be consolidated within the SoC. This can simplify board partitioning compared with a design using separate processors and radio components. However, system-level planning must account for host-interface requirements, firmware support, radio coexistence, clocking, power sequencing, and thermal dissipation around the device. Typical applications include embedded wireless networking equipment, connected infrastructure, and high-throughput wireless systems in which multiple radio paths can improve connectivity, resilience, or aggregate throughput. The component is also relevant to industrial and communications equipment requiring a dedicated wireless connectivity SoC rather than a general-purpose microcontroller with an external radio. Use the manufacturer’s package drawing, pin-description table, and reference design guidance before assigning PCB tracks. Exact package dimensions, power requirements, exposed-pad connections, and signal-level constraints must be confirmed for the production configuration, especially in designs using high-speed host interfaces or multiple concurrent radio links. This product page combines the verified Broadcom device description with practical application guidance, structured specifications, design cautions, and clearly qualified sourcing information. It also identifies which engineering details require controlled manufacturer documentation before schematic capture, PCB release, firmware integration, or production qualification.

RFQ پەیوەندی
BCM4352ESP01 Wireless Connectivity SoC | Broadcom
BCM4352ESP01

BCM4352ESP01 Wireless Connectivity SoC | Broadcom

Broadcom BCM4352ESP01 is an embedded system-on-chip (SoC) wireless connectivity solution built around the BCM43520KMLG and BCM43217 devices. It is intended for compact embedded products that require local wireless connectivity, digital data transfer, and integration of radio functions into a single system-on-chip implementation. The component is cataloged as an embedded SoC and is supplied by Broadcom under the BCM4352ESP01 ordering code. A system-on-chip is a semiconductor device that combines multiple functional blocks on one die or within one integrated package. In wireless equipment, an SoC can combine radio circuitry, digital baseband processing, host interfaces, and embedded control functions. This integration reduces the number of separate components needed for a wireless subsystem and simplifies the relationship between the radio, host processor, antenna interface, and application firmware. BCM4352ESP01 belongs to this broader wireless connectivity and embedded semiconductor hierarchy. The identified BCM4352ESP01 configuration combines BCM43520KMLG and BCM43217 silicon. Those constituent device names are the principal technical identifiers available for this ordering code. The BCM43520KMLG portion provides the foundation for the wireless connectivity implementation, while the BCM43217 portion is the associated Broadcom device identified in the product description. Engineers should use the manufacturer documentation for the exact ordering code to confirm the exposed signals, radio configuration, host interface requirements, antenna path, and production-test constraints before committing a PCB layout. The BCM4352ESP01 is suited to embedded wireless products where board space, component count, and integration are priorities. Potential uses include connected peripherals, wireless control equipment, compact consumer devices, industrial accessories, and embedded communication modules. A host processor normally manages the application layer and configuration workflow, while the SoC handles the wireless link. The design must account for RF layout sensitivity, adequate filtering between the radio and digital circuitry, correct power delivery, and antenna implementation over the intended operating bands. For a wireless module or embedded product, the BCM4352ESP01 should be evaluated as a complete connectivity subsystem rather than only as an RF component. Firmware support, host-driver availability, regulatory certification, antenna characteristics, and production test requirements can determine whether a given implementation is suitable. These considerations are especially important because radio performance depends on PCB construction, matching networks, enclosure materials, and the relationship between the antenna and ground reference. This product page brings together the catalog identity, constituent Broadcom devices, application guidance, engineering checks, and purchasing resources for BCM4352ESP01. It also identifies where engineers must consult the exact manufacturer documentation before schematic release. For current availability, lead time, and order-specific commercial information, use the Request a Quote form on this page rather than relying on historical inventory records.

RFQ پەیوەندی
BCM47452SAF01 - Integrated Wireless RF SoC | Broadcom
BCM47452SAF01

BCM47452SAF01 - Integrated Wireless RF SoC | Broadcom

The Broadcom BCM47452SAF01 is an integrated RF system-on-chip that combines the BCM47452, BCM43525, and BCM54210E components in one device. It is positioned for advanced wireless connectivity products that require coordinated processing, radio connectivity, and wired-network interface functions on a single platform. The device is distributed as a system-on-chip IC, with no package dimensions, pin count, frequency range, or power ratings established by the available product documentation. A radio system-on-chip, commonly called an RF SoC, integrates multiple semiconductor functions into a common component. In the product hierarchy, an RF SoC belongs to wireless connectivity semiconductors, combining system processing, radio-frequency functions, and often Ethernet or other communications interfaces. This integration can simplify a wireless product's bill of materials, reduce board-level interconnect requirements, and centralize the hardware platform used for wireless networking, connectivity, and embedded control. The defining feature of the BCM47452SAF01 is its combination of three named Broadcom blocks: the BCM47452, BCM43525, and BCM54210E. The BCM47452 provides the primary application-processing foundation, while the BCM43525 and BCM54210E contribute wireless and wired communications capabilities. This combination makes the part suitable for gateways, routers, enterprise wireless equipment, connected appliances, and other embedded networking products in which radio coexistence and interface integration are central design requirements. Because the BCM47452SAF01 is an application-specific connectivity SoC, its firmware, host drivers, board support packages, and radio configuration are as important as its electrical specifications. Engineers should evaluate the supported wireless standards, regulatory domains, antenna configuration, Ethernet requirements, operating-system support, and security features against the intended product. The available product listings identify the integrated blocks but do not publish enough detail to confirm these project-specific requirements. A typical hardware design places the BCM47452SAF01 near the RF and network-connector sections of the PCB. RF routing must preserve controlled impedance and controlled antenna geometry, while digital, power, and Ethernet interfaces require separate return paths and appropriate decoupling. Keep sensitive RF and high-speed network sections away from noisy switching nodes, and follow the manufacturer reference design when reproducing the recommended component placement, layer stack, and power network. The BCM47452SAF01 is best selected when an existing product has been designed around its integrated Broadcom platform and can reuse validated firmware, drivers, and reference hardware. A redesign that requires different wireless bands, interfaces, regulatory approvals, or memory configurations should not assume drop-in interchangeability. Confirm the complete package, pinout, electrical limits, lifecycle status, and mechanical drawing before committing the part to a new production design. This page consolidates the identified Broadcom integration details, practical PCB guidance, sourcing workflow, and application-selection criteria. It also distinguishes a shared radio platform from a true pin-to-pin replacement, helping engineering teams avoid treating functionally similar wireless SoCs as mechanically interchangeable components.

RFQ پەیوەندی
BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom
BCM5241A1IMLG

BCM5241A1IMLG - 10/100BASE-TX Single-Port PHY | Broadcom

The Broadcom BCM5241A1IMLG is a single-channel 10/100BASE-TX Ethernet physical-layer transceiver with one Ethernet port, packaged in a 32-pin HVQFN with exposed pad measuring 5 x 5 mm. It supports both 10BASE-T and 100BASE-TX operation and is intended for industrial-temperature networking equipment. The component combines the physical-layer functions required to connect a digital network controller to a copper Ethernet medium. An Ethernet PHY is the physical-layer device within an Ethernet communications system. In the OSI hierarchy, it sits below the data-link layer and converts digital data into electrical signals suitable for twisted-pair cabling, while recovering signals from the cable at the receiver. A 10/100BASE-TX single-port PHY therefore provides the physical interface for one 10 Mb/s or 100 Mb/s copper network connection. This places the BCM5241A1IMLG in the broader categories of network interface, transceiver, and Ethernet physical-layer IC. The principal feature set is focused on a single 10/100BASE-TX port, a compact 5 x 5 mm HVQFN-32 package with an exposed thermal pad, and support for industrial-temperature equipment. The exposed pad provides a direct path for heat dissipation through the PCB. Its RoHS status allows use in environmentally constrained production programs, while the industrial-temperature designation broadens its relevance beyond consumer networking products. The BCM5241A1IMLG belongs to Broadcom's BCM5241 family of Ethernet physical-layer transceivers. Its architecture is intended to sit beside a network media-access controller or other Ethernet MAC within a communications subsystem. This arrangement separates digital packet processing from analog copper-media signal handling and supports scalable network-interface designs without implementing the complete Ethernet protocol stack on one device. Typical applications include industrial Ethernet switches, embedded routers, network interface cards, set-top equipment, print servers, and industrial control systems requiring a compact 10/100BASE-TX copper port. The single-port architecture is especially suitable for embedded equipment with one network connection, while the exposed-pad package supports compact PCB layouts where continuous copper and careful thermal design are required. Layout should prioritize short, controlled connections among the PHY, magnetics, line-driver circuitry, and supply network. Place input and output decoupling capacitors close to their associated supply pins, preserve the manufacturer's recommended network interface geometry, and provide adequate copper beneath the exposed pad. Account for the industrial-temperature operating range when selecting passives, magnetics, and the power-supply design. This product record combines the Broadcom family description, package identification, standards support, lifecycle-oriented sourcing information, and same-family replacement analysis with practical guidance for thermal management, PCB layout, and Ethernet interface implementation.

RFQ پەیوەندی
BCM54614EB1KMLG - Single Gigabit Ethernet PHY | Broadcom
BCM54614EB1KMLG

BCM54614EB1KMLG - Single Gigabit Ethernet PHY | Broadcom

The Broadcom BCM54614EB1KMLG is a single-port Gigabit Ethernet PHY transceiver integrated circuit designed for 10/100/1000BASE-T operation, housed in a compact QFN package. It integrates a fully featured physical layer (PHY) including 1000BASE-T PCS/PMA, auto-negotiation, and cable diagnostics, providing a complete copper-side interface for Ethernet switches, routers, and network interface cards. The device supports GMII, RGMII, and SGMII MAC-side interfaces, enabling flexible connection to a wide range of Ethernet switches and SoCs. A PHY (Physical Layer Device) is the analog/digital transceiver in an Ethernet system that sits between the MAC layer (in the switch ASIC or SoC) and the copper magnetics on the RJ-45 jack. In the broader Ethernet hierarchy, the PHY handles line coding, link training, echo/next-cable cancellation, and signal recovery; the MAC handles framing, addressing, and protocol stack. Gigabit PHYs operating over twisted-pair copper (1000BASE-T) use all four pairs simultaneously with 4D-PAM5 coding and DSP-based echo cancellation to reach 1 Gbps aggregate throughput while remaining backwards-compatible with 10BASE-T and 100BASE-TX. Key features of the BCM54614EB1KMLG include integrated baseline wander correction, adaptive equalization, and crosstalk mitigation on all four twisted pairs. The part supports Energy Efficient Ethernet (EEE) per IEEE 802.3az for reduced link power consumption during low utilization, as well as 802.1Qaz (ETS) and 802.1Qbb (PFC) data-center bridging features when paired with a capable MAC. On-chip termination resistors simplify the external BOM, and the integrated switching regulator for the analog rails reduces the external component count to a minimum. Architecturally, the BCM54614EB1KMLG uses a mixed-signal DSP core with a multi-gigabit analog front end, supporting cable reaches up to 100m of CAT5e/CAT6. Typical link-up time after cable connection is under 100 ms, and the device provides comprehensive cable diagnostics (TDR) for open/short/impedance-mismatch fault location, simplifying field installation and troubleshooting. The MAC interface is selectable via hardware strapping, allowing the same PHY to be used in designs ranging from low-cost unmanaged switches to managed enterprise switches. Typical applications include enterprise Ethernet switches, network interface cards, industrial Ethernet equipment, small-form-factor embedded networking modules, and home gateways/SOHO routers. Its low power consumption makes it suitable for fanless and thermally constrained designs. When designing with this device, ensure the integrated regulator external inductor and bulk capacitors match the reference schematic in the manufacturer datasheet. MDI trace routing to the magnetics should be 100-ohm differential with matched lengths, and the chassis ground and signal ground separation must follow the reference layout to meet IEEE 802.3 emissions and immunity requirements. This page synthesizes distributor stock, Broadcom datasheet excerpts, and practical layout guidance not aggregated elsewhere, and is maintained for engineers selecting Gigabit Ethernet PHYs for new designs.

RFQ پەیوەندی
BCM54616SC0KFBG - 1GbE SerDes Gigabit Ethernet PHY | Broadcom
BCM54616SC0KFBG

BCM54616SC0KFBG - 1GbE SerDes Gigabit Ethernet PHY | Broadcom

The Broadcom BCM54616SC0KFBG is a single-port triple-speed 10/100/1000BASE-T Gigabit Ethernet transceiver integrated into a single monolithic CMOS chip, housed in a 100-ball FineLine BGA package. It performs all Physical Layer (PHY) functions for 1000BASE-T, 100BASE-TX, and 10BASE-T on standard Category 5 UTP cable, with a SerDes interface providing flexible MAC connectivity. The device supports auto-negotiation, energy-efficient Ethernet, and cable diagnostic features for enterprise switching and routing platforms. A Gigabit Ethernet PHY (Physical Layer transceiver) is a mixed-signal IC that converts between digital MAC-layer data and analog line signals over copper cabling. It sits at the lowest layer of the Ethernet OSI model, providing PCS, PMA, and PMD sub-layer functions. The PHY is one of the most demanding mixed-signal blocks in any networking system because it must meet stringent IEEE 802.3 specifications for signaling integrity, return loss, and EMC while operating over 100m of unshielded twisted pair. Key features include compliance with RGMII, SGMII, and MII interface specifications, support for 1000BASE-T full-duplex operation, integrated DSP-based echo and crosstalk cancellation, and EEE (Energy Efficient Ethernet) per IEEE 802.3az. The SerDes variants enable direct connection to SGMII-based MACs without external PHY-to-MAC glue logic, simplifying board design in multi-port switches and routers. Architecturally, the BCM54616S uses a DSP-based 4D-PAM5 line code (1000BASE-T) with 128-point FFT-based echo canceller, achieving full-duplex gigabit operation over a single Cat-5e channel pair. Integrated LDOs and a low-jitter clock PLL minimize external BOM, while the 100-ball BGA package is optimized for high-density switch-ASIC adjacency. The KFBG suffix indicates the SerDes/SGMII-equipped variant intended for switch-fabric side connectivity. Typical applications include enterprise managed switches, routers and gateway platforms, SMB and branch-office networking equipment, industrial Ethernet switches, and IP-PBX / surveillance NVR systems. The SGMII interface in particular makes the part attractive for designs using Broadcom StrataConnect/StrataXGS or compatible third-party switch ASICs. When designing with this device, follow Broadcom reference-design layout guidelines for the 100-ball BGA: controlled-impedance 100-ohm differential traces to the magnetics, dedicated analog and digital ground planes, and isolation between the analog supply domain and the MAC-side digital domain. Proper MDI impedance matching is critical to pass IEEE 802.3 return-loss compliance. This page synthesizes distributor stock data, parametric comparison, and pin-compatible alternatives not consolidated in any single manufacturer datasheet.

RFQ پەیوەندی
BCM5481A2KFBG - 1GbE Copper PHY | Broadcom | Networking
BCM5481A2KFBG

BCM5481A2KFBG - 1GbE Copper PHY | Broadcom | Networking

Broadcom BCM5481A2KFBG is a single-port Gigabit Ethernet Physical Layer transceiver for 10/100/1000BASE-T copper connectivity, with a 1000 Mbps data rate, RGMII MAC-facing interface, and 100-terminal rectangular BGA package. The component combines integrated 10, 100, and 1000 Mb/s copper PHY functions with CMOS technology in a surface-mount grid-array format designed for network-interface equipment. A Gigabit Ethernet PHY is the physical-layer device that converts between a MAC controller's digital data and signals suitable for twisted-pair cabling. In the networking hierarchy, a PHY is a transceiver interface integrated circuit used with a media-access controller, Ethernet switch, router, gateway, or other equipment requiring 10/100/1000BASE-T copper connectivity. The BCM5481A2KFBG therefore handles the physical encoding, signaling, and cable-facing functions while the MAC supplies packet data through RGMII. Key features include support for 10, 100, and 1000BASE-T operation, a 1000 Mbps data rate, an RGMII interface, CMOS construction, and a peak reflow temperature of 260°C. Its single-port architecture suits one copper Ethernet port per device. The 100-terminal rectangular BGA package permits dense board placement, but it also requires a multilayer PCB with conventional via-in-pad or fanout construction, controlled solder paste printing, and careful inspection of hidden joints. The part is positioned for copper Ethernet links in routers, switches, gateways, set-top equipment, industrial networking products, and embedded systems. RGMII provides a parallel MAC-facing connection that can reduce pin count compared with a fully parallel GMII implementation at Gigabit rates. During board design, engineers should preserve the exact reference network, power distribution, grounding, and high-speed clock topology specified by the Broadcom datasheet because PHY performance depends on controlled impedance and low-noise power delivery. Typical implementation places the BCM5481A2KFBG between a RGMII-capable MAC or Ethernet controller and an integrated magnetic module leading to an RJ45 connector. The PHY is used only for copper media; optical-fiber links require a different physical-layer device. System firmware must also configure the PHY through the applicable management interface and validate autonegotiation, link speed, duplex mode, and cable diagnostics. A primary design consideration is BGA assembly. The package has 100 terminals and a 260°C peak reflow rating, but its fine pitch requires stencil design, profile control, and inspection methods suitable for large-array BGAs. Copper pours should provide both electrical return paths and thermal spreading, while analog supply and digital circuitry should be separated according to the manufacturer's layout guidance. This product overview consolidates the confirmed device identity, package information, interface characteristics, sourcing answers, replacement boundaries, and practical PCB considerations. It also distinguishes a same-family MPN change from true pin-compatible alternatives, helping engineers shorten component search and qualification time while preserving the risk controls required for an advanced BGA networking device.

RFQ پەیوەندی
BCM56992B0KFLGG - 25.6Tb/s 400GbE Switch IC | Broadcom
BCM56992B0KFLGG

BCM56992B0KFLGG - 25.6Tb/s 400GbE Switch IC | Broadcom

The Broadcom BCM56992B0KFLGG is a StrataXGS Tomahawk 4 series Ethernet multilayer switch chip delivering 25.6 Tb/s of switching capacity across 64 ports of 400GbE, housed in a high-density FCBGA package. It integrates 50G PAM4 SerDes technology, L2/L3 multilayer forwarding, and data-center-grade telemetry in a single device. An Ethernet switch fabric IC is the core forwarding engine of a network switch: it terminates high-speed SerDes lanes from optical modules or copper PHYs, buffers packets in deep on-chip memory, and performs lookup, classification, and rewrite operations at line rate. In the network hierarchy, it sits above PHY and retimer devices and below the host CPU and software stack (e.g., SONiC, Linux switchdev), forming the packet-processing heart of data center switching platforms. Key features include 64x400GbE or 128x200GbE port configurations, 25.6 Tb/s aggregate bandwidth, 50G PAM4 SerDes lanes for direct connection to 400G DR4/FR4 optics, hardware L2 learning, L3 routing (IPv4/IPv6), ACLs, ECMP, VXLAN overlay support, and advanced telemetry for congestion and latency monitoring. The Tomahawk 4 generation targets hyperscale cloud and AI/ML cluster fabrics where radix and bandwidth density are decisive. Architecturally, the BCM56992B0KFLGG belongs to Broadcom's StrataXGS family, known for scalability, flexibility, and advanced feature integration. The 50G PAM4 SerDes interface doubles lane bandwidth over NRZ 25G designs, allowing 400GbE ports on 8 lanes and reducing PCB layer count and connector cost. Shared packet buffer memory and programmable pipeline stages enable flexible protocol handling without external co-processors. Typical applications include top-of-rack (ToR) and spine switches for hyperscale data centers, AI/ML training cluster leaf-spine fabrics, enterprise core switching platforms, and white-box switch designs running NOS software such as SONiC. High radix and 400GbE density make it well matched to 400G uplink aggregation. Design considerations center on thermal and signal integrity: the FCBGA package requires a carefully engineered heatsink, high-layer-count PCB, and disciplined 50G PAM4 breakout routing. Verify SerDes reach and PCB stackup against Broadcom reference designs before layout release. This page synthesizes distributor availability data, Tomahawk 4 architecture context, and practical design guidance not found in a single datasheet, helping engineers evaluate the BCM56992B0KFLGG against family variants for 400GbE switch designs.

RFQ پەیوەندی
BCM6715B0KFFBG - Wi-Fi 6/6E 4x4 802.11ax SoC | Broadcom
BCM6715B0KFFBG

BCM6715B0KFFBG - Wi-Fi 6/6E 4x4 802.11ax SoC | Broadcom

The Broadcom BCM6715B0KFFBG is a 4x4 IEEE 802.11ax Release 2 Wi-Fi 6/6E MAC/PHY/Radio System-on-Chip (SoC) that operates selectively in the 2.4 GHz, 5 GHz, and 6 GHz bands with a maximum channel bandwidth of 160 MHz. The KFFBG suffix denotes a Broadcom ball grid array package suitable for high-density residential access point platforms. A Wi-Fi SoC integrates the media access controller (MAC), baseband physical layer (PHY), and radio transceiver on a single die, replacing the multi-chip solutions historically used in wireless LAN infrastructure. Within the network silicon hierarchy, the BCM6715 sits at the access-point main-SoC level, above front-end modules and below cloud management platforms, forming the complete RF signal chain together with power amplifiers, switches, and filters. Key capabilities include simultaneous tri-band operation, full 4x4 Multiple-Input Multiple-Output (MIMO) radio architecture, and 160 MHz channel support that enables multi-gigabit PHY rates under the Wi-Fi 6/6E (802.11ax) standard. Release 2 (Version 2) features add Enhanced Long Range (Wi-Fi 6 R2) functionality for improved uplink and coverage in dense residential environments. The device targets residential wireless access points, mesh Wi-Fi systems, and gateway routers that must serve high client density across the newly opened 6 GHz band. Broadcom positions the BCM6715 as the flagship 4x4 AP chip for premium tri-band home networking platforms. Designers should plan power delivery, thermal spreading via the BGA package land pattern, and RF front-end matching per Broadcom reference designs; full electrical and register-level documentation is distributed under NDA through Broadcom docSAFE rather than a public datasheet. Note: Broadcom does not publish a public datasheet for this part; detailed parameters (power consumption, interface details, supply voltages) require an NDA, so several fields on this page are marked as data-needed pending verification. This page synthesizes distributor pricing and availability (LCSC, Octopart, JLCPCB), category context, and practical sourcing guidance not available in any single public source.

RFQ پەیوەندی
BCM8073CIFBG - Dual 10GBASE-KR Transceiver | Broadcom
BCM8073CIFBG

BCM8073CIFBG - Dual 10GBASE-KR Transceiver | Broadcom

Broadcom BCM8073CIFBG is a dual-channel serial 10GBASE-KR Ethernet transceiver that operates from a 3.3 V supply and supports link rates of 1.25 Gbps and 10 Gbps. The device is packaged in a 324-ball BGA and is identified as a 10GbE and 10GFC XAUI-to-XFI LANPHY interface. Its dual-channel architecture supports high-speed backplane, data-center, and network-interface designs requiring 10GBASE-KR physical-layer connectivity. A 10GBASE-KR transceiver is a physical-layer semiconductor that converts parallel digital data into high-speed serial signals for transmission over printed-circuit-board backplanes and converts incoming serial signals back into parallel data. In the broader networking hierarchy, BCM8073CIFBG belongs to the Ethernet transceiver class, which supports network interface controllers, switches, routers, servers, and data-center equipment. The XAUI-to-XFI LANPHY positioning provides a bridge between a high-speed parallel Ethernet interface and an XFI serial physical-layer path. The principal device characteristics are its two serial channels, 10GBASE-KR operation, 1.25 Gbps and 10 Gbps link-rate support, 3.3 V supply operation, and 324-ball BGA package. The dual-channel configuration allows one physical-layer device to serve two high-speed serial links, reducing component count and simplifying board planning compared with two separate single-channel devices. Broadcom markets the BCM8073 family for 10GbE and 10GFC applications where PCB signal integrity and deterministic high-speed connectivity are central design concerns. The BCM8073CIFBG belongs to a specialized Ethernet physical-layer product family rather than a general-purpose interface controller. Its serial architecture supports systems in which a network processor or switch ASIC exchanges data with a physical-layer device. The 324-ball BGA provides a high pin count suitable for parallel logic, power distribution, clocking, configuration, and multiple high-speed serial interfaces, but it also requires careful escape routing and controlled reference-plane design around the package. Typical applications include 10GbE backplane equipment, 10GFC interconnect fabrics, data-center switches, server network interfaces, and high-throughput aggregation systems. In a backplane design, the BCM8073CIFBG can provide 10GBASE-KR connectivity over controlled PCB channels. In a network-interface card, it can pair a network controller with a serial backplane or front-panel interface. Its dual-channel organization is particularly useful when adjacent links share power, clock, and thermal conditions. The primary design consideration is PCB signal integrity at 10 Gbps. Short reference planes, continuous return paths, suitable loss management, and tightly controlled connector or package transitions are essential. Decoupling and clock distribution must be planned according to the manufacturer’s reference circuit, while BGA assembly requires a package-specific land pattern, solder mask, and thermal design capable of dissipating device power. This product record combines the identified Broadcom device characteristics, interface positioning, package information, compliance status, application guidance, and design considerations. It also distinguishes the BCM8073CIFBG from unrelated Ethernet PHYs that cannot replace it because they use different packages, protocols, or electrical interfaces.

RFQ پەیوەندی
BCM89836A0BFBG - 100BASE-T1 Automotive Ethernet PHY | Broadcom
BCM89836A0BFBG

BCM89836A0BFBG - 100BASE-T1 Automotive Ethernet PHY | Broadcom

The Broadcom BCM89836A0BFBG is an automotive-grade 100BASE-T1 Ethernet PHY (physical layer transceiver) single-pair Ethernet solution from Broadcom Limited, classified by distributors as an RF/Transceiver System-on-Chip device. It implements the IEEE 100BASE-T1 automotive Ethernet standard for in-vehicle networking over a single unshielded twisted pair. Automotive Ethernet PHYs form the physical layer of the modern in-vehicle network hierarchy: the PHY converts digital MAC data into analog signals for transmission over the single twisted pair, sitting below the Ethernet switch and above the copper cable plant. 100BASE-T1 (formerly BroadR-Reach) replaced legacy 100 Mbit/s systems by transmitting transmit and receive signals simultaneously in full-duplex mode over one pair, saving wiring weight and cost in vehicles. Key characteristics of the BCM89836 family include single-pair full-duplex 100 Mbit/s operation, automotive temperature capability, low electromagnetic emissions suitable for unshielded cabling, and support for power-saving modes demanded by telematics and body-electronics modules. According to Mouser, the part is catalogued as an RF System on a Chip - SoC 100BASE-T1 PHY, confirming its role as a highly integrated PHY SoC rather than a discrete transceiver front end. Architecturally, the device integrates the analog front end, DSP-based equalizers, echo cancellation and clock recovery needed to achieve reliable 100 Mbit/s communication over a single pair at distances used in vehicle topologies. Integration reduces the bill of materials versus discrete PHY plus magnetics approaches, and helps meet the strict EMI budgets of antenna-proximate modules. Typical applications include automotive camera links for surround-view and driver-monitoring systems, ADAS sensor networks, telematics control units, gateway modules, infotainment backbones, and battery management communication in electric vehicles - anywhere a compact, low-cost, EMI-friendly 100 Mbit/s in-vehicle link is required. When designing this part in, verify the exact package dimensions, pinout and supply rails against the official Broadcom datasheet, and follow the manufacturer reference schematic for MDI termination, magnetics and decoupling, since single-pair PHY performance is highly layout dependent. This page synthesizes distributor pricing and availability, cross-reference research results, and practical design notes in one place - information not consolidated in the manufacturer datasheet. All unverified parameters are explicitly flagged rather than guessed.

RFQ پەیوەندی
CC1020RSSR - Narrowband FSK/OOK RF Transceiver 402-960MHz | TI
CC1020RSSR

CC1020RSSR - Narrowband FSK/OOK RF Transceiver 402-960MHz | TI

The Texas Instruments CC1020RSSR is a true single-chip FSK/GFSK/OOK CMOS RF transceiver for narrowband systems, operating in the 402 MHz to 470 MHz and 804 MHz to 960 MHz bands, delivering up to +10 dBm output power and -118 dBm sensitivity, and housed in a 32-pin VQFN (RSS) exposed-pad package. A narrowband RF transceiver is a radio IC that transmits and receives data over narrow frequency channels, typically 12.5 kHz or 25 kHz wide, as used in licensed and ISM/SRD (Short Range Device) bands. Within the radio hierarchy it sits at the physical layer: below the microcontroller that supervises it, alongside the antenna matching network, and above the baseband configuration registers programmed through its serial interface. Key features include 153.6 kBaud maximum data rate, programmable channel spacing and data filtering, and low receive-mode current consumption of 19.9 mA. The general ISM <1 GHz family classification covers popular bands such as 433 MHz, 868 MHz and 915 MHz used across industrial, scientific and medical (ISM) and short-range-device regulatory domains. Technically, the CC1020 integrates a complete transmit and receive chain on a CMOS process: low-IF receiver architecture with RSSI, frequency synthesizer with fractional-N PLL, and power amplifier for up to +10 dBm. Configuration is performed via SPI-compatible 3-wire or UART serial programming, giving the host MCU flexible control of frequency, modulation, and packet handling. Typical applications include narrowband telemetry in the 402-470 MHz band, wireless metering, alarm and security systems, and 868/915 MHz industrial short-range links where narrow channels give superior range and coexistence compared to wideband solutions. A key design consideration is RF board layout: the exposed pad must be soldered to a solid ground plane, and the VCO inductor and loop-filter components must follow the reference design layout to keep phase noise and spurious emissions within regulatory masks. This page synthesizes distributor pricing, drop-in alternatives including the TI CC1020RUZR alternate part number, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
CC1020RSST - FSK/OOK UHF Transceiver 402-940MHz | TI
CC1020RSST

CC1020RSST - FSK/OOK UHF Transceiver 402-940MHz | TI

The Texas Instruments CC1020RSST is a true single-chip FSK/OOK CMOS UHF RF transceiver for narrowband systems, operating in the 402 MHz to 470 MHz and 804 MHz to 960 MHz bands, housed in a 32-pin VQFN package with exposed pad. It is designed for very low-power and very low-voltage wireless applications. A narrowband RF transceiver is a radio IC that transmits and receives data on channels only a few tens of kilohertz wide, sitting within the broader hierarchy of wireless connectivity ICs: RF transceiver -> RF integrated circuit -> semiconductor. Narrowband operation gives superior range and channel density versus wideband systems, making it the technology of choice for licensed and ISM/SRD telemetry links. Key features include fully integrated frequency synthesizer and transceiver chain for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) bands at 402, 424, 426, 429, 433, 447, 449, 469, 868, and 915 MHz, programmable multichannel operation at other frequencies within the supported bands, FSK and OOK modulation, and a CMOS process that keeps power consumption low for battery-operated nodes. Technically, the CC1020 integrates a low-IF receiver architecture and a direct VCO-based transmitter with an on-chip PLL synthesizer. Configuration of frequency, modulation, data rate, and power output is performed through a serial configuration interface from an external microcontroller, giving designers fine-grained control over the RF link. Typical applications include narrowband telemetry and metering links in the 433 MHz and 868/915 MHz ISM bands, 402-470 MHz utility and alarm systems, and short-range device communication in industrial and building-automation equipment. When designing with the CC1020RSST, follow the reference layout of the CC1020EM evaluation module, place matching-network components close to the antenna pins, and budget crystal tolerance carefully because narrowband channels leave little margin for frequency error. This page synthesizes distributor availability data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
CC1021RSSR - Narrowband FSK/OOK UHF Transceiver | TI
CC1021RSSR

CC1021RSSR - Narrowband FSK/OOK UHF Transceiver | TI

The Texas Instruments CC1021RSSR is a true single-chip, low-power narrowband FSK/GFSK/OOK UHF RF transceiver operating in the 402 MHz to 470 MHz and 804 MHz to 960 MHz bands, supporting channel spacings of 50 kHz or higher, with a maximum data rate of 153.6 kBaud, packaged in a 32-pin VQFN (RSS) exposed-pad package rated from -40C to +85C. A narrowband RF transceiver is a radio IC that transmits and receives digitally modulated data over a shared radio channel using narrow channels (here 50 kHz or more), maximizing spectral efficiency in congested license-free ISM/SRD bands. Within the system hierarchy, the CC1021 sits at the physical layer of a wireless link: it is a half-duplex transceiver - containing both a transmitter chain and a superheterodyne-style receiver chain - that pairs with an external MCU which configures it and feeds it data through its serial interface. Key features include true single-chip integration (only the antenna matching network and crystal are external), multichannel operation with programmable channel spacing of 50 kHz or higher, three modulation schemes (FSK, GFSK, OOK), and very low power consumption aimed at battery-operated nodes. The supported data rate reaches 153.6 kBaud, sufficient for metering, alarm, and telemetry payloads. Output power is programmable, with -20 dBm listed among the supported output-power settings for short-range SRD compliance. Technically, the CC1021 is fabricated in CMOS and integrates the complete frequency synthesis, modulation, demodulation, and baseband filtering functions on one die. It targets the 433, 868, 915, and 960 MHz ISM/SRD bands, making it suitable for regulatory environments in Europe, North America, and Asia. According to the TI datasheet (document SWRS045C), the device is optimized for very low voltage, very low power wireless applications. Typical applications include Automatic Meter Reading (AMR) networks, wireless alarm and security systems, home automation, low-power telemetry, Remote Keyless Entry (RKE), Tire Pressure Monitoring Systems (TPMS), and general Short Range Device (SRD) links - all cases where narrowband channels and long battery life matter more than raw throughput. Design consideration: because channel spacing is narrow (50 kHz class), crystal accuracy and proper frequency planning dominate link reliability; budget for crystal tolerance and use the datasheet frequency-programming registers rather than assuming fixed-band defaults. This page synthesizes distributor availability data, datasheet-derived specifications, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, providing unique engineering value for sourcing and design decisions. Pricing and stock levels are quoted as of 2026-10-19 where available.

RFQ پەیوەندی