بەرهەمەکان (530+)

LSM6DSLTR - 3D Accelerometer & 3D Gyroscope iNEMO | STMicroelectronics
LSM6DSLTR

LSM6DSLTR - 3D Accelerometer & 3D Gyroscope iNEMO | STMicroelectronics

The LSM6DSLTR is a high-performance 3D digital accelerometer and 3D digital gyroscope system-in-package (SiP) from STMicroelectronics, designed for low-power and high-accuracy motion sensing applications. It integrates a 3-axis accelerometer and a 3-axis gyroscope in a single LGA-14L package, providing a compact solution for consumer, industrial, and IoT devices. The device features a full-scale acceleration range of ±2/±4/±8/±16 g and an angular rate range of ±125/±245/±500/±1000/±2000 dps, with a selectable output data rate (ODR) from 1.6 Hz to 6.66 kHz. The LSM6DSLTR operates from a 1.71V to 3.6V supply voltage and includes an advanced digital motion engine (DME) for always-on features such as step counting, tilt detection, and motion/tilt interrupts. An inertial measurement unit (IMU) is a device that combines accelerometers and gyroscopes to measure linear acceleration and angular velocity. The LSM6DSLTR is a 6-axis IMU, which is a subset of motion sensors used in a wide range of applications from smartphones to industrial robotics. IMUs are essential for orientation tracking, gesture recognition, and navigation systems. The LSM6DSLTR belongs to the iNEMO family of STMicroelectronics, which integrates multiple sensors and processing capabilities into a single package, enabling advanced motion sensing with minimal power consumption. Key features of the LSM6DSLTR include a low power consumption of 0.4 mA in normal mode and 0.9 mA in high-performance mode, making it ideal for battery-powered devices. It also features a 16-bit data output for both accelerometer and gyroscope, an embedded temperature sensor, and a programmable interrupt generator. The device supports I2C and SPI interfaces, allowing flexible integration with microcontrollers. The LSM6DSLTR is AEC-Q100 qualified, making it suitable for automotive applications, and is RoHS compliant. The LSM6DSLTR utilizes a micro-machined silicon structure with capacitive sensing elements, providing high stability and low noise. The device includes a 2 KB FIFO buffer that can store data to reduce host processor load, and it supports advanced features such as sensor fusion, pedometer, and significant motion detection. The device is designed to operate over a temperature range of -40°C to +85°C, ensuring reliable performance in harsh environments. Typical applications include wearable devices, smartphones, gaming controllers, industrial vibration monitoring, and automotive navigation systems. The LSM6DSLTR is particularly suited for applications requiring low power consumption and high accuracy, such as fitness trackers and smartwatches, where continuous motion tracking is essential. When designing with the LSM6DSLTR, ensure proper decoupling of the power supply with a 100 nF capacitor close to the VDD pin, and route the I2C/SPI lines with appropriate pull-up resistors. The device's interrupt pins can be configured to wake the system on motion, reducing overall power consumption in always-on applications.

RFQ پەیوەندی
LSM6DSMTR - 6-Axis IMU, ±2/±4/±8/±16 g, ±125/±245/±500/±1000/±2000 dps | STMicroelectronics
LSM6DSMTR

LSM6DSMTR - 6-Axis IMU, ±2/±4/±8/±16 g, ±125/±245/±500/±1000/±2000 dps | STMicroelectronics

The STMicroelectronics LSM6DSMTR is a system-in-package (SiP) 6-axis inertial measurement unit (IMU) that integrates a 3D digital accelerometer and a 3D digital gyroscope, plus a temperature sensor, in a 14-pin LGA (3x2.5x0.83 mm) package. The accelerometer supports user-selectable full-scale ranges of ±2/±4/±8/±16 g and the gyroscope supports ±125/±245/±500/±1000/±2000 dps, with output data rates up to 6.6 kHz. A dedicated auxiliary SPI interface provides an independent OIS (optical image stabilization) data path for the gyroscope. An IMU (Inertial Measurement Unit) is a sensor subsystem that fuses multi-axis accelerometer and gyroscope data to deliver orientation, motion, and angular-velocity information. IMUs belong to the broader class of MEMS (micro-electromechanical systems) motion sensors and sit within inertial sensing, a foundational tier of modern sensor signal chains. The LSM6DSMTR is part of ST's iNEMO family - always-on, low-power-on, low-noise sensor modules used in smartphones, wearables, and AR/VR platforms. Key features include 0.65 mA typical current consumption in high-performance mode, integrated smart FIFO up to 4 kbyte, Android M compliance, a hardware step counter and step detector, and standard I²C/SPI primary digital interfaces. Built-in self-test, a wake-up/free-fall interrupt engine, and a tilt/6D/4D orientation function eliminate the need for host-side algorithm overhead in many use cases. The auxiliary SPI allows an image-stabilization controller to read gyro data without disturbing the main application processor. The device leverages a CMOS-process MEMS die co-packaged with an ASIC die in a single LGA, providing tight accelerometer/gyroscope cross-axis alignment and factory-calibrated offset/gain. Internal signal conditioning, ADC conversion, and digital filtering yield noise density figures suitable for high-end consumer and prosumer applications where previously only discrete FOG (fiber-optic gyroscope) class performance was acceptable. Typical applications include smartphone camera OIS/EIS, augmented-reality head tracking, wearable fitness bands, optical image stabilization modules, drone flight controllers, and gesture recognition. The auxiliary SPI + main I²C/SPI dual-bus topology lets a dedicated OIS controller access gyro data while the host application reads accelerometer data over I²C. When designing with this device, allocate one byte of INT1/INT2 routing for the step counter and another for free-fall/wake-up. Use 100 nF + 1 µF decoupling on VDD and VDDIO, place the part over a keep-out region around the LGA cavity, and respect ST's PCB pad and stencil guidelines (NSMD pads, 0.1 mm via-in-pad optional). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
LSM6DSO32XTR - 32g 6-Axis IMU with ML Core | ST
LSM6DSO32XTR

LSM6DSO32XTR - 32g 6-Axis IMU with ML Core | ST

The STMicroelectronics LSM6DSO32XTR is an always-on 6-axis inertial measurement unit (IMU) system-in-package combining a 3-axis digital accelerometer with a full-scale range up to 32 g and a 3-axis digital gyroscope with a range up to 4000 dps, housed in a 14-pin LGA package measuring 2.5 x 3.0 x 0.83 mm. It communicates over I2C or SPI and consumes approximately 0.55 mA in high-performance mode, according to ST product data. An inertial measurement unit is a motion sensor that fuses accelerometer and gyroscope outputs to track orientation, acceleration, and rotation. Within the sensor hierarchy, the IMU sits above discrete accelerometers and gyroscopes, and forms the core motion-sensing element of smartphones, wearables, drones, industrial condition-monitoring nodes, and robotics platforms. ST's iNEMO family is a leading MEMS IMU line, and the LSM6DSO32X extends it with the widest accelerometer range in the family. Key differentiating features include the 32 g accelerometer full scale - four times the 16 g range of the standard LSM6DSO - which captures shock and vibration events without clipping. The device integrates an embedded finite state machine (FSM) and a Machine Learning Core (MLC) that run decision-tree logic on-chip, enabling always-on context detection such as fall detection, activity classification, and vibration fingerprinting with negligible host CPU load. Technically, the sensor supports output data rates up to 6.66 kHz for the accelerometer and gyroscope, a smart FIFO for offloading data, hardware low-pass and high-pass filters, and an on-chip temperature sensor. Its always-on architecture with low-power and ultra-low-power modes makes battery-powered designs practical. The X variant additionally supports Sensor Fusion Low Power (SFLP), computing a game rotation vector in hardware. Typical applications include drone and UAV flight controllers needing 32 g shock tolerance, industrial predictive-maintenance nodes detecting machine vibration signatures via the MLC, and high-impact sports wearables. ODR range and noise floor make it equally suited to premium motion tracking in AR/VR controllers. Designers should pay attention to PCB placement: mount the part away from board flex zones and vibrating masses, and follow ST's layout guidelines for the LGA pads and ground plane continuity to preserve gyro bias stability. This page synthesizes distributor pricing context, pin-compatible family alternatives, and practical design guidance beyond the raw ST datasheet, delivering information gain over generic catalog listings.

RFQ پەیوەندی
LSM6DSOTR - 6-Axis IMU, ±16g Accel, ±2000dPS Gyro LGA-14 | STMicroelectronics
LSM6DSOTR

LSM6DSOTR - 6-Axis IMU, ±16g Accel, ±2000dPS Gyro LGA-14 | STMicroelectronics

The STMicroelectronics LSM6DSOTR is a system-in-package featuring a 3-axis digital accelerometer and a 3-axis digital gyroscope that delivers always-on low-power motion sensing at 0.55 mA in high-performance mode for an optimal user motion experience in consumer and wearable devices. An IMU (Inertial Measurement Unit) is a MEMS-based sensor package that combines multiple motion-sensing axes — typically 3-axis linear acceleration and 3-axis angular rate — into a single silicon die with a digital interface. The LSM6DSOTR belongs to the iNEMO inertial module family from STMicroelectronics, sitting inside the broader taxonomy of MEMS sensors → motion sensors → inertial sensors → IMU → 6-axis IMU. It integrates a capacitive MEMS accelerometer and a capacitive MEMS gyroscope on a single die, plus a digital SPI/I²C/MIPI I3C interface and an embedded finite-state machine plus machine-learning core for event recognition. Key features include user-selectable full-scale ranges of ±2/±4/±8/±16 g on the accelerometer and ±125/±250/±500/±1000/±2000 dps on the gyroscope, 16-bit data output, embedded temperature sensor, and ST's machine-learning-core and FSM that offload classification from the host MCU. The integrated I3C bus support and a programmable interrupt generator simplify data-ready and threshold-triggered wakeups for always-on applications. The LSM6DSO silicon uses a 130 nm CMOS ASIC paired with a high-aspect-ratio MEMS structure, achieving an accelerometer noise density of 60 µg/√Hz typical and a gyroscope rate noise density of 3.8 mdps/√Hz typical. The sensor operates from a 1.71 V to 3.6 V analog supply and a separate 1.71 V to 3.6 V digital I/O supply, allowing mixed-voltage host interfacing without level shifters. Typical applications include wrist wearables for step counting and gesture recognition, tilt and orientation tracking in AR/VR controllers and remote controls, motion-activated user interfaces in smartphones and tablets, asset tracking and vibration monitoring in industrial IoT nodes, and head tracking in TWS earbuds. The 0.55 mA high-performance current and sub-µA power-down current make it well suited to coin-cell and Li-ion battery designs. When designing with this device, ensure the LGA-14 land pattern matches the official ST reference layout and that the host processor issues the proper soft-reset and configuration sequence via I²C, SPI, or MIPI I3C. The device defaults to I²C address 0x6A and can be hardware-strapped to 0x6B; verify the strap with SDO/SA0 before issuing read commands. This page synthesizes distributor pricing, drop-in LGA-10/LGA-14 alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
LSM6DSOXTR - 6-Axis IMU with AI ML Core | STMicroelectronics
LSM6DSOXTR

LSM6DSOXTR - 6-Axis IMU with AI ML Core | STMicroelectronics

The STMicroelectronics LSM6DSOXTR is a system-in-package 6-axis inertial measurement unit combining an always-on 3-axis accelerometer and a 3-axis gyroscope with an embedded machine learning core, housed in a 14-pin LGA package (2.5 mm x 3.0 mm x 0.83 mm) and operating from 1.71 V to 3.6 V at just 0.55 mA in high-performance mode. An IMU (inertial measurement unit) is a motion sensor module that measures acceleration and angular velocity simultaneously. It sits at the top of the motion-sensing hierarchy - accelerometer + gyroscope + fusion logic - within the broader sensor IC family used for orientation, gesture, and activity tracking in embedded and power management systems. Key features include accelerometer ranges up to 16 g and gyroscope ranges up to 2000 dps, an I2C and SPI digital interface, an auxiliary SPI (OIS) interface for camera optical image stabilization, and the ST FINITE state machine plus decision-tree machine learning core that offloads pattern detection from the host MCU. Always-on operation is enabled by low power modes with wakeup and activity/inactivity detection. The MEMS sensor die is packaged with a dedicated ASIC that performs 16-bit data conversion and on-chip FIFO buffering, allowing the host to sleep while the IMU autonomously classifies motion events. The embedded AI core executes user-trained decision trees directly in-sensor, cutting system power and latency for always-on context awareness. Typical applications include wearables and fitness trackers, smartphone screen rotation and tap detection, industrial condition monitoring, and drone/robotics attitude estimation. Design consideration: keep the IMU away from vibration sources and board flex zones, and use I2C pull-ups appropriate for the bus speed; configure the ML core with ST's Unico/Unicleo GUI tools before deployment in firmware. This page adds value beyond the datasheet with distributor pricing tiers, drop-in alternatives, and practical design notes synthesized from verified web data.

RFQ پەیوەندی
LSM6DSRTR - 6-Axis IMU w/ 4000dps Gyro | STMicroelectronics
LSM6DSRTR

LSM6DSRTR - 6-Axis IMU w/ 4000dps Gyro | STMicroelectronics

The STMicroelectronics LSM6DSRTR is a 6-axis iNEMO inertial measurement unit (IMU) integrating a 3-axis digital accelerometer and a 3-axis digital gyroscope with an extended ±4000 dps full-scale range, plus an embedded temperature sensor, housed in a 14-pin LGA (2.5x3 mm) package. It delivers user-selectable accelerometer ranges of ±2/±4/±8/±16 g, gyro ranges from ±125/±250/±500/±1000/±2000/±4000 dps, low noise density of 3.8 mg/√Hz (accel) and 5 mdps/√Hz (gyro), and supports both I2C and SPI digital interfaces. The part is shipped on tape-and-reel (suffix TR) and targets high-end consumer, industrial, and drone applications. A 6-axis IMU (inertial measurement unit) is a system-in-package that combines a 3-axis accelerometer and a 3-axis gyroscope to measure linear acceleration and angular rate in three dimensions. In the broader taxonomy, an IMU is a type of motion sensor, which sits under MEMS sensors, which are a category of semiconductor devices. IMUs serve as the primary feedback element in motion-tracking systems, providing raw inertial data that application processors, sensor hubs, or motor controllers fuse with other sources (GPS, magnetometers) for orientation, navigation, and stabilization. Key features include an extended ±4000 dps gyroscope range (vs the more common ±2000 dps), an embedded Machine Learning Core (MLC) and finite state machine for on-chip gesture classification, a configurable FIFO up to 4 kB, and an integrated I3C interface for high-bandwidth host communication. The wide gyro range makes the LSM6DSR particularly attractive for high-rotation-rate platforms such as drones, robots, and gaming controllers, eliminating the saturation that would occur with mainstream ±2000 dps parts. Architecturally, the LSM6DSR uses a single-mass MEMS accelerometer and a single-mass MEMS gyroscope with dedicated ASIC signal conditioning, a temperature-compensated analog front end, and an interrupt-driven digital output block. Power consumption is approximately 0.55 mA (high-performance mode) down to 4 µA (low-power mode), and the part supports an operating supply range of 1.71 V to 3.6 V. The sensor hub and MLC capability allow gesture and activity recognition to run directly on the device, offloading the host processor. Typical applications include drone flight controllers and gimbal stabilization, wearable fitness and gesture tracking, robotics and industrial orientation sensing, AR/VR motion tracking, gaming controllers and pointing devices, and OIS (optical image stabilization) assist in smartphone camera modules. The extended 4000 dps range especially suits FPV quadcopters where rapid yaw rotation is common. When designing with this part, allocate a 1 uF decoupling capacitor close to VDD and follow ST's recommended LGA-14 PCB land pattern for thermal and mechanical reliability. The interrupt pins INT1/INT2 should be tied to the host's wake-capable GPIO for event-driven operation that minimizes host sleep current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone, giving engineers a single source for parametric depth, sourcing, and BOM risk analysis.

RFQ پەیوەندی
LSM6DSV16XTR - 6-Axis IMU with AI & Qvar | ST | Wearables
LSM6DSV16XTR

LSM6DSV16XTR - 6-Axis IMU with AI & Qvar | ST | Wearables

The STMicroelectronics LSM6DSV16XTR is an always-on 6-axis inertial measurement unit (IMU) combining a 3-axis accelerometer with a 3-axis gyroscope, up to +/-16 g and +/-4000 dps full scale, 7.68 kHz max ODR, and an embedded machine learning core with Qvar electrostatic sensing, housed in a 14-pin LGA (2.5 x 3 mm) package. An IMU (inertial measurement unit) is a motion sensor subsystem that measures linear acceleration and angular rate to track orientation and movement. Within the sensor hierarchy, the IMU sits above discrete accelerometers and gyroscopes, and below complete navigation systems; modern IMUs like the LSM6DSV16XTR add edge-compute features such as a machine learning core (MLC), finite state machines (FSM), and sensor fusion, positioning them as smart sensor hubs for battery-powered devices. Key features include an accelerometer full scale selectable from +/-2 g to +/-16 g, gyroscope full scale from +/-125 dps to +/-4000 dps, and high ODR up to 7.68 kHz for demanding motion and OIS workloads. The Qvar channel detects quasi-static electric field variations, enabling tap, swipe, and water-touch detection without additional electrodes. ST's embedded MLC and FSM offload the host MCU, classifying gestures and activity while the main processor sleeps. The architecture integrates an always-on low-power design with autonomous sensor fusion (SFLP) delivering game rotation vector output, plus adaptive self-configuration (ASC) and an auxiliary SPI interface for OIS/EIS camera stabilization in parallel with the main I2C/SPI link. Typical applications include smartwatches and fitness bands, smartphone camera OIS/EIS stabilization, and hearing aids or earbuds where ultra-low power always-on motion detection extends battery life. Design-wise, keep the sensor away from vibration sources and respect the exposed pad grounding on the LGA-14 land pattern for mechanical stability; the auxiliary SPI pin mapping should be confirmed against the datasheet during layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
LSM6DSV320XTR - 6-Axis IMU ±320g ±4000dps AI Core | STMicroelectronics
LSM6DSV320XTR

LSM6DSV320XTR - 6-Axis IMU ±320g ±4000dps AI Core | STMicroelectronics

The STMicroelectronics LSM6DSV320XTR is a 6-axis inertial measurement unit (IMU) with a dual-accelerometer architecture supporting full-scale ranges up to ±320 g alongside a ±4000 dps gyroscope, housed in a 14-pin LGA package (2.5x3x0.86 mm). It combines a low-g sensing chain for everyday motion tracking and a high-g sensing chain capable of capturing automotive crash-level impacts up to 320 g, with both X, Y, and Z axes measured on each accelerometer. An IMU (Inertial Measurement Unit) is a micro-electromechanical system (MEMS) device that combines multiple sensing axes of accelerometer and gyroscope data into a single output. IMUs sit within the sensor hierarchy as motion sensors, which are a branch of MEMS semiconductors used in everything from smartphones to vehicles. The LSM6DSV320XTR belongs to the system-level category of "smart sensors" because it embeds a finite state machine (FSM) and a machine learning core (MLC) for on-device AI inference, eliminating the need for an external microcontroller to run motion classification algorithms. Key features include ±320 g maximum accelerometer full-scale range, ±4000 dps gyroscope range, embedded machine learning core, adaptive self-configuration (ASC), and a 4.5 KB FIFO buffer for batched data streaming. The device operates from a 1.71V to 3.6V supply, draws only 2.9 µA in low-power mode, and exposes both I2C and SPI digital interfaces for flexible host integration. Operating temperature spans -40 °C to +85 °C, suiting industrial and consumer environments. Technically, the LSM6DSV320XTR uses a dual-mass MEMS architecture to deliver high dynamic range without sacrificing low-g noise performance. The MLC and FSM allow engineers to run decision-tree and gesture-recognition models directly on-chip, dramatically reducing host MCU wake events and extending battery life in wearable applications. The 0.67 mA active supply current is competitive for always-on applications. Typical use cases include car crash detection telemetry, wearables with embedded activity recognition, IoT vibration monitoring, and personal electronics with context-aware gesture input. The automotive-grade crash detection capability is unique in a sub-$10 IMU and addresses insurance telematics and event data recorder designs. Design consideration: the dual-accelerometer topology requires attention to which chain is enabled in firmware; designers must select the appropriate full-scale range per sensing phase to avoid saturating the low-g channel during impact events. Decoupling capacitors should be placed within 2 mm of the supply pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
LSM6DSV80XTR - 6-Axis IMU, 80g Accel, AI Core | STMicroelectronics
LSM6DSV80XTR

LSM6DSV80XTR - 6-Axis IMU, 80g Accel, AI Core | STMicroelectronics

The STMicroelectronics LSM6DSV80XTR is a low-power 6-axis inertial measurement unit (IMU) that integrates a 3-axis accelerometer and a 3-axis gyroscope in a 14-pin 2.5x3 mm LGA package. It combines two accelerometer structures delivering 16 g and 80 g full-scale sensing with a gyroscope supporting up to ±4000 dps, plus an embedded machine learning core and sensor-fusion low-power engine for wearables and sport trackers. The device operates from a 1.71 V to 3.6 V supply and consumes 2.9 µA in low-power mode, enabling always-on motion tracking in battery-powered products. An IMU (Inertial Measurement Unit) is a micro-electromechanical system (MEMS) device combining multiple motion sensors - typically a 3-axis accelerometer and a 3-axis gyroscope - to measure linear acceleration and angular rate along three orthogonal axes. IMUs sit at the sensor layer of a product hierarchy: IMU -> motion sensor -> MEMS sensor -> semiconductor. They form the perception backbone for inertial navigation, gesture recognition, and context-aware applications, feeding higher-level sensor-hub processors, microcontrollers, or wireless SoCs with raw or fused motion data. Key features include dual full-scale accelerometer ranges (±16 g and ±80 g) for capturing both subtle wrist motion and high-impact events such as falls or sport collisions, a wide ±125/±250/±500/±1000/±2000/±4000 dps gyroscope range, an embedded machine-learning core for on-device classification, and a sensor-fusion low-power (SFLP) engine that outputs quaternions and Euler angles at low µA cost. Communication is provided over I²C, I³C, and auxiliary SPI interfaces, and an integrated temperature sensor aids drift compensation. The LSM6DSV80XTR is built on ST's proprietary THELMA MEMS process and a 130 nm mixed-signal CMOS ASIC, co-packaged in a single LGA. The dual-structure accelerometer (a high-g and a low-g transducer sharing the same sense axis) is what differentiates this part from earlier LSM6DS family members: it preserves fine resolution at low g while still capturing peak accelerations above the standard 16 g ceiling. Typical applications include sport wearables (impact detection in boxing, running gait analysis), wristbands, AR/VR controllers, fall-detection pendants for elderly care, and personal trackers. For each use case, the relevant specification is the high-g full scale combined with the embedded ML core. When designing with the LSM6DSV80XTR, follow ST's reference schematic exactly: a 100 nF decoupling cap on VDD plus a 10 µF bulk on VDDIO, clean ground return under the LGA thermal/exposed pad, and short traces to the host MCU. Verify I3C compatibility before substituting an I²C-only MCU. This page synthesizes distributor pricing, drop-in replacements, and practical design notes not consolidated in the manufacturer datasheet, including a same-package alternative comparison that DigiKey and Mouser product pages do not show.

RFQ پەیوەندی
LSM9DS1TR - 9-Axis iNEMO IMU, ±16g Accel/±2000dps Gyro | STMicroelectronics
LSM9DS1TR

LSM9DS1TR - 9-Axis iNEMO IMU, ±16g Accel/±2000dps Gyro | STMicroelectronics

The STMicroelectronics LSM9DS1TR is a system-in-package 9-axis iNEMO inertial measurement unit that integrates a 3D digital linear accelerometer, a 3D digital gyroscope, and a 3D digital magnetometer in a 24-pin LGA package (3.5 x 3.5 mm). It operates from a 1.9 V to 3.6 V supply and communicates via I2C/SPI digital interfaces, supporting up to 16-bit data output for all three sensor channels. An Inertial Measurement Unit (IMU) is an electronic sensor module that measures and reports a body's specific force (acceleration), angular rate (rotation), and magnetic field heading. IMUs are core components in modern motion-aware electronics, sitting in the hierarchy of MEMS sensors -> motion sensors -> inertial sensors -> semiconductor devices. By integrating accelerometer, gyroscope, and magnetometer into a single SiP, the LSM9DS1TR eliminates the board space, alignment overhead, and fusion firmware complexity of three discrete sensors. Key specifications include user-selectable full-scale ranges of ±2/±4/±8/±16 g for acceleration, ±245/±500/±2000 dps for angular rate, and ±4/±8/±12/±16 gauss for magnetic field, with output data rates up to 952 Hz (accel/gyro) and 80 Hz (magnetometer). The device includes an embedded FIFO buffer (up to 32 slots), two programmable interrupt generators for motion/ orientation/ magnetic-threshold wake-up events, an integrated temperature sensor, and a wide operating temperature range of -40 C to +85 C. The LSM9DS1TR uses capacitive MEMS sensing elements for the accelerometer and gyroscope and a Hall-effect/magneto-resistive element for the magnetometer, with per-channel 16-bit ADCs providing high-resolution output. The integrated linear voltage regulator ensures stable analog supply even as VDD varies, while the FIFO and interrupt engine offload event detection from the host MCU, enabling aggressive power-down duty-cycling in battery-powered designs. Typical applications include motion tracking in smartphones, wearables, and AR/VR headsets, gesture and activity recognition, gaming controllers, drone flight stabilization, robotics orientation, and industrial tilt/vibration monitoring. The wide range of programmable full-scale and ODR settings allows the same part to serve a phone pedometer and an industrial tilt sensor. When designing with this part, place 100 nF decoupling close to VDD and follow ST's recommended power-up sequence in the datasheet. For best magnetometer accuracy, keep ferromagnetic material (e.g., connector shells, inductors, FPC shields) at least 5 mm away from the device. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference for the LSM9DS1TR.

RFQ پەیوەندی
MAX31855KASA+ - K-Type Thermocouple-to-Digital Converter | Maxim Integrated
MAX31855KASA+

MAX31855KASA+ - K-Type Thermocouple-to-Digital Converter | Maxim Integrated

The Maxim Integrated MAX31855KASA+ (now supplied by Analog Devices) is a cold-junction compensated thermocouple-to-digital converter that digitizes the signal from a K-type thermocouple and outputs the result as a signed 14-bit SPI-compatible value, all in an 8-pin SOIC (NSOIC) surface-mount package. The device resolves temperatures to 0.25 degC, accepts thermocouple readings as high as +1800 degC and as low as -270 degC, and delivers thermocouple accuracy of plus/minus 2 degC across its operating range. It integrates the cold-junction compensation sensing, ADC, digital controller, and SPI-compatible interface into a single IC, eliminating the discrete amplifier chain traditionally required for precision thermocouple signal conditioning. An integrated thermocouple-to-digital converter such as the MAX31855KASA+ belongs to the broader sensor signal-chain IC family, which sits hierarchically under temperature sensor ICs -> sensors -> analog/mixed-signal ICs -> semiconductors. By performing linearization and cold-junction compensation in hardware, the part eliminates firmware lookup tables for Seebeck-coefficient polynomial correction and lets microcontrollers consume temperature data directly over SPI, freeing CPU bandwidth for system-level tasks. Key features of the MAX31855KASA+ include 14-bit signed output resolution (plus sign bit), an SPI read-only interface with up to 4.3 MHz clock, on-chip open-thermocouple detection that flags a fault bit when the probe breaks, and a 2.7 V to 3.6 V supply range. The 8-pin NSOIC package provides low thermal mass for accurate cold-junction measurement and supports hand-solderable prototyping as well as high-volume reflow assembly. A dedicated fault register reports open thermocouple, short-to-GND, and short-to-VDD conditions in addition to the temperature data. Typical applications for the MAX31855KASA+ include industrial furnace and oven temperature monitoring, 3D-printer hot-end and bed thermistor replacement, HVAC duct sensing, automotive exhaust and engine-temperature logging, food-service and laboratory equipment, and any embedded design that previously used a MAX6675 and now needs higher resolution plus thermocouple open-detection. The wide -270 degC to +1800 degC supported span also makes it suitable for cryogenic instrumentation and high-temperature process control. When designing with the MAX31855KASA+, keep the thermocouple traces short, matched, and physically separated from switching nodes to preserve common-mode noise immunity. Place the device close to the thermocouple connector so the on-chip cold-junction sensor tracks the cold-junction temperature accurately, and add a 0.1 uF decoupling capacitor close to VDD. Unlike the MAX6675 it replaces, the MAX31855 changes SPI framing and clock polarity, so existing firmware must be updated; it is not code-compatible with the legacy part.

RFQ پەیوەندی
MAX31865ATP+ - RTD-to-Digital Converter, SPI, 20-TQFN | Maxim Integrated
MAX31865ATP+

MAX31865ATP+ - RTD-to-Digital Converter, SPI, 20-TQFN | Maxim Integrated

The Maxim Integrated (Analog Devices) MAX31865ATP+ is a resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs), packaged in a 20-pin TQFN (5x5 mm) and specified over the -40C to +125C automotive temperature range. It integrates a precision delta-sigma ADC that converts the ratio of the RTD resistance to a reference resistance into a digital output, supports PT100 and PT1000 sensors, and accepts 2-, 3-, or 4-wire RTD topologies through configurable FORCE+, FORCE-, RTDIN+, and RTDIN- pins. The device exposes a standard SPI-compatible serial interface for host read-out and configuration, and provides integrated ±45 V input protection on the RTD/force pins to survive field fault transients. According to the Maxim datasheet, the converter achieves 0.5C initial RTD measurement accuracy (PT100, 15-bit resolution mode) and 50 Hz / 60 Hz simultaneous rejection at the ADC modulator. An RTD (Resistance Temperature Detector) is a precision temperature sensor whose resistance varies predictably with temperature, most commonly implemented as a platinum wire (PT100 = 100 ohm at 0C, PT1000 = 1000 ohm at 0C). Compared to thermocouples and silicon sensors, RTDs offer superior linearity, stability, and repeatability, making them the preferred choice for industrial process control, HVAC, medical instrumentation, and laboratory calibration. An RTD-to-digital converter such as the MAX31865ATP+ handles the excitation, ratiometric ADC conversion, linearization hint generation, and fault detection that would otherwise require a precision analog front-end, a microcontroller with calibrated lookup tables, and external protection - collapsing that workload into a single 5x5 mm IC. Key features include a 15-bit ADC resolution with selectable 50 Hz / 60 Hz notch, integrated ±45 V overvoltage protection on sensor pins, automatic RTD fault detection (open, short, and out-of-range thresholds), a low-drift on-chip reference, and a 3.0 V to 5.5 V supply range. SPI clock rates up to 5 MHz enable fast conversion read-out. The 20-TQFN package provides low thermal mass and excellent PCB thermal spreading for industrial environments. The architecture pairs a low-noise chopper-stabilized input front-end with a sigma-delta modulator, achieving effective resolution suitable for IEC 60751 Class A or AA RTD measurements. Internal calibration registers compensate for reference-resistor tolerance, and the device can be put into low-power standby between conversions to save energy in battery-powered field instruments. Combined, these features let designers achieve lab-grade temperature accuracy without external signal conditioning. Typical applications include industrial process temperature transmitters, HVAC duct and chiller sensors, medical infusion-pump and sterilizer probes, food-processing and pharmaceutical cold-chain loggers, and automotive battery-pack thermal monitoring. The ±45 V protection makes it well suited for long-cable industrial installations where induced surges are common. A key design consideration is choosing the reference resistor to match the nominal RTD resistance (typically 4.3 kohm for PT100, 4.3 kohm or 4.3 kohm parallel combinations for PT1000). The reference-resistor absolute tolerance and temperature drift set the absolute accuracy of the entire measurement chain, so a low-drift, low-TCR part (e.g. 0.1%, 10 ppm/C) is recommended. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes - including RTD wiring topologies, reference-resistor selection, and SPI timing - that go beyond the manufacturer datasheet to accelerate board bring-up.

RFQ پەیوەندی
MAX6628MTA+T - ±1°C Remote Digital Temp Sensor SPI/TDFN-8 | ADI
MAX6628MTA+T

MAX6628MTA+T - ±1°C Remote Digital Temp Sensor SPI/TDFN-8 | ADI

The Analog Devices MAX6628MTA+T is a precise digital temperature sensor that reports the temperature of a remote diode-connected transistor (typically a low-cost 2N3904 NPN) with ±1°C accuracy over the 0°C to +125°C remote range, housed in an 8-pin TDFN (3 mm × 3 mm) package. The device converts the remote-junction temperature to a 12-bit digital word and pushes it out through an SPI-compatible serial interface, allowing direct connection to most microcontrollers and microprocessors. The local die temperature is also readable, and the sensor operates from a single +3.0 V to +5.5 V supply. A digital temperature sensor IC is a mixed-signal device that uses an on-chip ADC to digitize a thermal-proportional signal (bandgap voltage, Vbe, or forward-diode Vf) and exposes the result over a serial bus such as SPI, I²C/SMBus, or 1-Wire. In the broader hierarchy, the MAX6628 sits in the temperature-sensor family, which is part of the sensor IC class, which itself belongs to the broader power management and analog signal chain category. Using an external diode as the sensing element decouples the hot spot from the ADC die, enabling accurate measurement of CPUs, FPGAs, ASICs, or power-stage heat sinks that the IC itself cannot physically reach. Key features include ±1°C remote accuracy from 0°C to +125°C, ±3°C remote accuracy from -55°C to +150°C, a 12-bit (0.0625°C LSB) temperature resolution, a 2200 pF-3300 pF recommended EMI filter capacitor between DXP and DXN, and a read-only SPI interface that simplifies firmware on microcontrollers that only need temperature data. The TDFN-8 (3×3) package is thermally efficient and footprint-compatible with standard 8-pin DFN/QFN land patterns. Typical supply current is in the hundreds of microamps, and the device includes a power-on-reset circuit that forces the first conversion to begin after supply stabilization. Architecturally, the device combines a precision current source that drives the external diode, an on-chip sigma-delta ADC that digitizes ΔVbe, a bandgap reference, calibration logic, and an SPI peripheral. The diode measurement is ratiometric and automatically compensates for series resistance and ideality factor variations when the recommended 2N3904 NPN is used. Typical applications include CPU/FPGA thermal monitoring in servers and workstations, laptop and notebook thermal management, industrial control cabinet temperature sensing, telecom base-station equipment health monitoring, and battery-pack temperature monitoring for portable and handheld systems. When designing with the MAX6628, place the 2N3904 (or equivalent) as physically close to the desired hot spot as possible, keep the PCB trace length to DXP/DXN short and matched, and add a 2200 pF capacitor between DXP and DXN to reject high-frequency EMI. Always add a local 0.1 µF decoupling capacitor adjacent to VDD. This page synthesizes distributor pricing, SPI-compatible drop-in alternatives, and practical layout notes for the MAX6628MTA+T that go beyond the manufacturer datasheet to help engineers select and qualify the part quickly.

RFQ پەیوەندی
MAX6675ISA+ - K-Thermocouple-to-Digital, 0-1024°C, SPI | Maxim
MAX6675ISA+

MAX6675ISA+ - K-Thermocouple-to-Digital, 0-1024°C, SPI | Maxim

The Maxim Integrated MAX6675ISA+ is a cold-junction-compensated K-type thermocouple-to-digital converter that integrates the thermocouple signal amplifier, cold-junction compensation, and a 12-bit SPI-compatible readout into a single 8-pin SOIC device. It accepts a K-type thermocouple input and outputs a 12-bit digital word corresponding to a temperature range of 0°C to +1024°C with 0.25°C resolution and 8-LSB (approximately ±2°C) accuracy from 0°C to +700°C. A thermocouple-to-digital converter is a sensor-interface IC that combines a precision analog front end (op-amp, PGA and reference), a sigma-delta or successive-approximation ADC, and digital linearization/cold-junction compensation (CJC) to deliver a calibrated digital temperature reading directly to a microcontroller. Within the broader signal-chain taxonomy, the MAX6675ISA+ belongs to the sensor-interface family, specifically a thermocouple digitizer; it sits below general-purpose SPI ADCs in system hierarchy but above bare thermocouple amplifiers because it performs the entire analog-to-Celsius conversion autonomously. Key features include single-supply operation from 3.0V to 5.5V, low 1.5mA typical supply current, simple SPI (read-only, 3-wire) digital interface, and conversion performed on demand via chip-select. The internal amplifier provides 21.84 mV/°C scaling mapped over the 12-bit output, eliminating the need for external cold-junction-compensation circuitry or firmware linearization. A thermocouple-disconnect detection pull-up identifies open sensor conditions, returning a known code rather than undefined output. Typical applications include industrial furnace and oven temperature monitoring, HVAC duct and exhaust sensing, 3D-printer hot-end control, automotive engine/exhaust diagnostics, and laboratory bench-instrument temperature logging. Hot-end 3D-printer controllers in particular rely on the MAX6675ISA+ because the 0.25°C resolution is well-matched to typical PID set-point windows and the SPI interface simplifies firmware integration on 8/32-bit MCUs. When designing with this device, keep the thermocouple trace short, isolate it from switching nodes, and ensure GND is solid because the chip uses the PCB ground as the cold-junction reference; any ground temperature rise translates directly into measurement error.

RFQ پەیوەندی
MAXM86146CFU+ - Optical Biosensing Module with AFE & MCU | Analog Devices
MAXM86146CFU+

MAXM86146CFU+ - Optical Biosensing Module with AFE & MCU | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAXM86146CFU+ is a highly integrated, ultra-low-power optical biosensing module that combines an analog-front-end (AFE), an Arm Cortex-M4 microcontroller unit (MCU), and two high-sensitivity photodiodes in a compact 38-pin OLGA package measuring 4.5 mm x 4.1 mm x 0.88 mm. It operates from a single 1.8 V supply and supports I2C and SPI communication protocols for sensor data and configuration. A biometric sensor hub is a fully integrated subsystem that captures, conditions, and processes optical signals from photodiodes to extract physiological parameters such as heart rate, blood oxygen saturation (SpO2), and respiration. Within the broader hierarchy, biometric sensor hubs sit at the intersection of sensors and embedded processing, building on photodiode optical front-ends, transimpedance amplifiers, and low-power MCUs. By merging the analog front-end, digital processing, and algorithm execution into a single optical module, the device eliminates discrete-component design complexity for wearable health monitoring. Key features include best-in-class optical AFE performance with integrated photodiodes, ultra-low-power architecture suitable for continuous battery-powered operation, built-in firmware-ready algorithms for heart-rate and SpO2 measurement, and support for I2C and SPI host interfaces. The integrated power-management unit accepts a single 1.8 V rail and generates all internal supplies, simplifying host-board design. The Arm MCU is specifically optimized for wearable biosensing workloads and wireless sensor nodes. The MAXM86146 integrates a precision LED driver with programmable current, a low-noise photodiode receiver, 20-bit ADC channels, and an Arm Cortex-M4 core with on-chip memory. Two integrated photodiodes (typically green and red/IR) eliminate the need for external photodetectors and reduce BOM count. The module is pre-programmed with Maxim/ADI validated biosensing algorithms, so designers can output calibrated heart-rate and SpO2 data over the digital bus without developing their own signal-processing stack. Typical applications include wrist-worn fitness bands and smartwatches, continuous heart-rate and SpO2 monitoring patches, hearables and earbud biometrics, sleep-tracking rings, and disposable clinical biosensors. The single-rail 1.8 V supply requirement makes it compatible with coin-cell and rechargeable lithium battery rails typical of wearable form factors. When designing with this device, ensure the host MCU provides 1.8 V at sufficient peak current for LED-pulse events, and route I2C/SPI traces away from the photodiode openings to avoid optical crosstalk. An external pull-up resistor is required on the AFE_GPI pin since this GPIO is open-drain. This page synthesizes distributor pricing, validated drop-in alternatives within the MAXM86146 family, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
MC14468P - 9V CMOS Ionization Smoke Detector IC | NXP
MC14468P

MC14468P - 9V CMOS Ionization Smoke Detector IC | NXP

The NXP Semiconductors MC14468P is a low-power CMOS ionization smoke detector IC with interconnect, operating from a 9 V supply in a 16-pin through-hole DIP package. It combines a 12 µA supply current with an ionization-sensor interface, an 8.2 MΩ chamber resistance, and a 0.1 nF external capacitor reference. The IC drives an external piezoelectric transducer when smoke is detected and supports systems designed around UL 217 and UL 268 requirements. An ionization smoke detector IC is a specialized sensor-interface and alarm-control device. It belongs to the smoke detector IC category, which sits under sensor and detector interfaces, smoke detection, and broader building safety electronics. Unlike a photoelectric detector, an ionization system uses a radiation-based ionization chamber whose sensing characteristics change when smoke enters the chamber. The MC14468P evaluates that condition and controls the alarm path. Key features include a 9 V DC operating supply, very low 12 µA supply current, an ionization input interface, voltage output behavior, and direct support for an external piezoelectric sound element. Its 16-pin DIP package supports conventional through-hole assembly, while the tube packaging format supports bulk production handling. The specified operating range is -10°C to +60°C. The MC14468P is intended to reduce the component count required to implement an ionization smoke alarm. According to the NXP manufacturer datasheet, the device operates with an ionization chamber and a small number of external components, detects smoke, and activates an alarm through an external piezoelectric transducer and internal drivers. Its interconnect capability provides a dedicated route for integrating the detector into a broader alarm or signaling system. Typical applications include residential smoke alarms, commercial building-alarm panels, interconnected household warning systems, industrial smoke-detection equipment, and retrofit designs that require a through-hole DIP footprint. Product designers should confirm that the selected ionization chamber, resistor, capacitor, buzzer, power supply, and PCB layout satisfy the safety requirements applicable to the finished detector. The principal design consideration is the detector network around the IC. The verified 8.2 MΩ chamber resistance and 0.1 nF capacitor values are application references rather than universal substitutions, so engineers should use the manufacturer datasheet and applicable UL requirements when calculating network values, timing, sensitivity, and fault conditions. This product record combines verified NXP and distributor information with an honest comparison of available drop-in data. It also identifies where pricing, detailed pin functions, and verified lifecycle-specific electrical limits remain unavailable, preventing unsupported replacement claims or unverified PCB-reuse assumptions.

RFQ پەیوەندی
MC34940EG - Electric Field Imaging Device | NXP Semiconductors
MC34940EG

MC34940EG - Electric Field Imaging Device | NXP Semiconductors

The NXP Semiconductors MC34940EG is an electric field imaging device for non-contact object detection, with an excitation frequency optimized for 120 kHz, a typical supply current of 8 mA, and a 24-SOIC package. The device generates an adjustable low-frequency sine wave through an external resistor and senses changes in an electric field established between external electrodes. An electric field imaging device is a sensor interface that detects objects without physically touching them. Its operating chain begins with an excitation signal, continues through an externally created electric field, and concludes with a measured response indicating a change in the sensed environment. Within the broader product hierarchy, the MC34940EG is a semiconductor sensor interface, a specialized sensing IC, and an integrated circuit designed for proximity and object-detection systems. Key features include a 120 kHz-optimized sine-wave generator, external-resistor frequency adjustment, and a supply current of 8 mA. The adjustable excitation allows the sensing system to be adapted to different electrode geometries and target materials. The 24-SOIC package provides a conventional surface-mount format for industrial control, embedded sensing, and compact instrumentation designs. Technically, the MC34940EG uses its output to drive an electric field between external electrodes. When an object enters or leaves that field, the electrical response changes, allowing the system to infer presence, position, or material-related variation. The low-frequency sine-wave architecture avoids the need for a high-frequency RF front end while supporting cost-sensitive, non-contact sensing applications. Typical uses include touchless activation, object-presence detection, capacitive-interface enhancement, material inspection, and industrial proximity sensing. The device is especially useful where moving mechanical contacts would be undesirable or where objects need to be detected across a physical barrier. Designers should select resistor and capacitor values using the manufacturer’s application guidance, place the external excitation and sensing components close to the device, and keep sensitive electrode traces away from noisy switching nodes. PCB cleanliness, guarded sensing traces, and stable electrode geometry are important because parasitic capacitance can alter the measured field response. This page combines the manufacturer datasheet details with practical application guidance, ordering-code comparisons, design notes, and direct links to technical documentation. It supports faster component selection while emphasizing that electrode geometry and signal-chain layout determine final sensing performance.

RFQ پەیوەندی
MCP96RL00-E/MX - 8-Type Thermocouple-to-I2C Converter | Microchip
MCP96RL00-E/MX

MCP96RL00-E/MX - 8-Type Thermocouple-to-I2C Converter | Microchip

The Microchip Technology MCP96RL00-E/MX is a fully integrated thermocouple Electromotive Force (EMF) to degree Celsius converter with integrated Cold-Junction compensation, supporting 8 thermocouple types (K, J, T, N, S, E, B, R) in a 20-pin MQFN-EP (5x5 mm) package. It features ±1.5°C maximum thermocouple temperature accuracy (typical ±0.5°C after calibration), 2.7V–5.5V supply, and an I2C interface up to 100 kHz with 4 selectable addresses. An EMF-to-temperature converter is a specialized analog front-end IC that linearizes the small millivolt-level output of a thermocouple probe into a digital temperature reading, replacing discrete op-amp, ADC, reference, and lookup-table firmware with one calibrated device. Thermocouple-to-digital converters belong to the broader sensor signal-chain family, sitting between the transducer (analog sensor) and the host MCU (digital domain), and are critical building blocks in industrial, automotive, and appliance temperature monitoring systems where measurement ranges exceed what silicon sensors can reach (typically above +200°C). Key features include on-chip cold-junction compensation using an internal diode sensor, four user-programmable temperature alert outputs, programmable digital filter (minimum 1 conversion settling time), and built-in open/short thermocouple detection. The I2C address is selectable via two ADDR pins (4 addresses), and an interrupt pin (ALERT) signals threshold events. User-programmable registers configure thermocouple type, resolution, averaging, and shutdown mode for low-power applications. Architecturally, the device integrates a low-noise chopper-stabilized PGA, a high-resolution ΣΔ ADC, an internal bandgap reference, and the cold-junction sensor. Conversion results are linearized using integrated polynomial coefficients per thermocouple type and delivered over the I2C bus as both the hot-junction temperature and the cold-junction (ambient) temperature, which simplifies host firmware. Typical applications include industrial furnace and oven controllers, HVAC duct and refrigeration monitoring, 3D-printer extruder and bed temperature sensing, food-service and laboratory equipment, automotive exhaust gas temperature sensing, and battery-pack thermal management. Across these, the MCP96RL00-E/MX replaces multiple discrete components with one calibrated IC, reducing BOM cost and PCB area. Design consideration: route the thermocouple traces as a differential pair away from switching converters and heat sources to preserve the micro-volt-level EMF signal, and place the input RC filter network (per datasheet typical application) within a few millimeters of the TC+ / TC- pins to minimize noise pickup. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not consolidated on the manufacturer datasheet or any single distributor page.

RFQ پەیوەندی
MLX92231LSE-AAA-010 - 3-Wire Hall Effect Switch, TSOT-23 | Melexis
MLX92231LSE-AAA-010

MLX92231LSE-AAA-010 - 3-Wire Hall Effect Switch, TSOT-23 | Melexis

The Melexis MLX92231LSE-AAA-010 is a 3-wire Hall-effect latch/switch IC housed in a TSOT-23-3 surface-mount package. It operates from a 2.7V to 24V supply (DC operating parameters specified from 3.5V to 24V), supports a south-pole unipolar switching function, and provides an open-drain output capable of sinking up to 70 mA. The device is temperature-compensated across -40 C to +150 C and qualified to the AEC-Q100 automotive standard. A Hall-effect switch is a solid-state magnetic sensor that translates a magnetic field threshold into a binary electrical output. Hall switches belong to the magnetic sensors family, which in turn sits within the broader sensor hierarchy (sensor -> transducer -> semiconductor -> electronic component). Unlike mechanical reed switches, Hall switches contain no moving parts, exhibit microsecond response times, and survive billions of switching cycles, making them the preferred choice in automotive, industrial, and consumer position/proximity applications. Key features of this variant include a pre-programmed operate and release point (Bop/Brp), integrated temperature compensation, ESD protection, and a wide 2.7V to 24V supply range that directly accepts 3.3V, 5V, 12V, and 24V rails without external regulation. The open-drain output requires a pull-up resistor and can interface directly with microcontrollers, logic inputs, or relay/coil driver stages. The device integrates a chopper-stabilized Hall element, a precision comparator, a bandgap reference, and an open-drain output stage on a single CMOS die. Chopper stabilization minimizes the offset drift across temperature, enabling reliable switching thresholds over the full automotive Grade 0 temperature range. The 70 mA sink capability allows the IC to drive LEDs, optocouplers, or small relays directly. Typical applications include automotive seatbelt buckles, gear-shift position sensing, BLDC motor commutation, contactless switches, and industrial limit switches. The wide supply range and AEC-Q100 qualification also suit 24V truck and off-road vehicle systems. Designers select this part when they need a robust, pre-calibrated, automotive-grade digital Hall switch with a compact TSOT-23 footprint. For design, place a 100 nF decoupling capacitor close to VDD and a pull-up resistor (typically 10 kohm) on the open-drain output. Avoid routing high-current switching traces directly over the package to prevent magnetic crosstalk, and keep ferromagnetic materials at least a few millimeters from the device to avoid distorting the sensed field. This page combines verified distributor pricing, drop-in alternatives, and engineering design notes that extend beyond the manufacturer datasheet to help engineers evaluate and source the MLX92231LSE-AAA-010 for production designs.

RFQ پەیوەندی
MMA1200D - ±281g Z-Axis Accelerometer | NXP SOIC-16
MMA1200D

MMA1200D - ±281g Z-Axis Accelerometer | NXP SOIC-16

The NXP MMA1200D is a surface-mount, Z-axis silicon capacitive micromachined accelerometer with a full-scale range of ±281g, signal conditioning, a 4-pole low-pass filter, and temperature compensation, housed in a 16-pin SOIC package. The device provides an analog voltage output proportional to acceleration along the Z axis and operates from a 5.0 V supply, with zero-g offset, full-scale span, and filter cut-off frequency factory trimmed so that no external components are required for normal operation. The MMA1200D includes a self-test capability that exercises the mechanical sensor element and signal path, allowing system-level verification of functionality at power-up or on demand. An accelerometer (g-sensor) is a micro-electromechanical (MEMS) transducer that converts acceleration forces into a measurable electrical signal. Capacitive MEMS accelerometers detect proof-mass displacement via changes in differential capacitance between interdigitated fingers, then convert that capacitance change to voltage using on-chip signal conditioning. Within the broader sensor hierarchy, the MMA1200D sits in the linear (versus rotational) acceleration sub-category and is one of the highest-g-range members of NXP's legacy MMA series, designed for shock, vibration, and crash-event detection rather than tilt or motion tracking. Key features include a ±281g measurement range, factory-set 4-pole low-pass filter for bandwidth limiting, integrated temperature compensation to minimize sensitivity drift, and a self-test pin that applies a known electrostatic force to the proof mass for in-system diagnostics. The 5.0 V analog supply simplifies integration with legacy 5V microcontroller ADCs, and the small SOIC-16 footprint supports high-density PCB designs. Sensitivity and zero-g offset are laser-trimmed at the factory, eliminating the need for production-line calibration. The MMA1200D employs a surface-micromachined polysilicon sense element with a differential capacitive half-bridge topology read out by a switched-capacitor charge integrator. The signal chain includes a chopper-stabilized front end, a factory-trimmed gain stage, the 4-pole Butterworth low-pass filter, and a temperature-compensation block that corrects both sensitivity and zero-g output over the full -40C to +125C automotive range. The output stage drives an analog ratiometric voltage centered at approximately 2.5 V at 0 g, scaling linearly with Z-axis acceleration. Typical applications include automotive airbag crash sensors, electronic stability control and rollover detection, hard-disk drive shock protection, industrial vibration monitoring, and appliance anti-vibration control. The high ±281g range makes it especially suitable for crash-sensing and high-shock event capture, where lower-g consumer accelerometers would saturate. When designing with the MMA1200D, place a 0.1 uF decoupling capacitor as close as possible to the supply pin and route the analog output away from switching noise sources. The self-test pin should be driven with a clean logic signal and not left floating, since the internal pull-up configuration may not be defined. For high-shock applications, mechanically isolate the sensor from PCB flexure with a rigid mounting boss. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-brand pin-compatible equivalents verified against NXP's published Z-axis MMA family datasheets.

RFQ پەیوەندی
MMA1220D - ±8g Z-Axis Micromachined Accelerometer | NXP
MMA1220D

MMA1220D - ±8g Z-Axis Micromachined Accelerometer | NXP

The NXP MMA1220D is a Low G micromachined Z-axis accelerometer with ±8g full-scale range, 250Hz bandwidth, and 250mV/g nominal sensitivity housed in a 16-pin SOIC surface-mount package. It operates from a single 4.75V to 5.25V supply and provides a ratiometric analog output with factory-calibrated zero-g offset, full-scale span, and 4-pole low-pass filter cutoff. An accelerometer is a sensor that measures proper acceleration (the rate of change of velocity) along one or more axes, converting mechanical motion into an electrical signal. The MMA1220D belongs to the capacitive micromachined accelerometer family, where a suspended proof mass deflects under acceleration and changes the gap of a differential capacitor pair. The on-chip ASIC conditions this capacitance change into a voltage proportional to acceleration. This category sits within the broader sensor hierarchy: accelerometer -> motion sensor -> inertial sensor -> MEMS sensor -> semiconductor device. Key features of the MMA1220D include a sensitivity of 237.5mV/g to 262.5mV/g, 4-pole low-pass filter with factory-set cutoff, integrated temperature compensation, and self-test capability. The device is qualified for automotive temperature grade operation, making it suitable for harsh-environment deployments. The 16-pin SOIC package is a standard surface-mount form factor compatible with automated assembly lines. The architecture combines a surface-micromachined sense element with a bipolar CMOS signal-conditioning ASIC. The 4-pole active low-pass filter limits bandwidth and reduces aliasing before the analog output drives an external ADC. Temperature compensation is applied on-chip to maintain sensitivity and zero-g offset accuracy across the automotive -40C to +125C range, eliminating the need for external calibration routines. Typical applications include automotive airbag deployment detection, vehicle stability control (ESC), tilt and inclination sensing, industrial vibration monitoring, and appliance motion detection. The Z-axis orientation and ±8g range make it particularly well-suited for crash detection in supplementary restraint systems where it supplements higher-g satellite sensors. When designing with the MMA1220D, the analog output is ratiometric to the supply voltage, so the ADC reference must share the same 5V rail. A 0.1uF decoupling capacitor placed within 5mm of the supply pin is recommended, and the analog output bandwidth should be matched to the application sample rate to avoid aliasing high-frequency shock content. This page synthesizes distributor pricing, drop-in compatible alternative parts, and practical PCB design notes that are not consolidated in the original NXP datasheet, helping engineers evaluate the MMA1220D for new designs and existing platform migrations.

RFQ پەیوەندی
MMA1250D - ±5g Z-Axis Micromachined Accelerometer | NXP
MMA1250D

MMA1250D - ±5g Z-Axis Micromachined Accelerometer | NXP

The NXP MMA1250D is a low-g, Z-axis, silicon capacitive micromachined accelerometer housed in a 16-pin SOIC (SOP-16) surface-mount package. It measures acceleration along the vertical (Z) axis over a full-scale range of ±5g with a factory-set sensitivity, zero-g offset, and a factory-calibrated 2-pole low-pass filter with a 50 Hz cutoff. On-chip signal conditioning and temperature compensation produce an ratiometric analog output voltage proportional to applied acceleration. An accelerometer is a micro-electromechanical system (MEMS) sensor that converts mechanical acceleration into an electrical signal; the MMA1250D belongs to the broader sensor category (sensor -> motion sensor -> accelerometer -> MEMS accelerometer), with capacitive sensing as its underlying physical principle. A free-moving proof mass displaces relative to fixed silicon combs under acceleration, changing the differential capacitance that is read out by an on-chip ASIC. The result is a single-rail analog output that designers can feed directly to an ADC. Key features include ±5g measurement range, ratiometric analog output, on-chip 2-pole low-pass filtering at 50 Hz, full system self-test, and 4.75 V to 5.25 V single-supply operation. Zero-g offset, full-scale span, and filter cut-off are all factory trimmed, eliminating external compensation components. The integrated self-test verifies mechanical and electrical integrity at power-up or on demand through a logic input. The MMA1250D uses Freescale/NXP's surface-micromachined polysilicon capacitive sense element with a CMOS signal-conditioning ASIC on the same die. The 50 Hz low-pass filter attenuates high-frequency vibration and electrical noise before the output buffer, while temperature compensation keeps the offset stable over the -40 °C to +105 °C operating range. The SOIC-16 form factor supports robust through-hole-free PCB assembly and stable mechanical mounting required for repeatable low-g readings. Typical applications include automotive vehicle dynamic control modules, airbag pre-crash sensing, industrial vibration monitoring, tilt/inclination sensing for platform leveling, and consumer motion-enabled appliances. The Z-axis (out-of-plane) sensing orientation makes the part especially suited to applications where the PCB is mounted vertically in the product chassis. When designing with the MMA1250D, treat the device's mounting orientation as part of the calibration: the Z-axis output is referenced to gravity, so tilt and shock effects are coupled and require mounting decisions during PCB layout. Decouple VDD with a 0.1 µF ceramic capacitor placed within 5 mm of the supply pin, and route the analog output away from switching node traces. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
MMA1250EGR2 - ±5g Z-Axis Micromachined Accelerometer | NXP
MMA1250EGR2

MMA1250EGR2 - ±5g Z-Axis Micromachined Accelerometer | NXP

The NXP Semiconductors MMA1250EGR2 is a low-G, Z-axis (perpendicular to the package top) silicon capacitive micromachined accelerometer with a measurement range of ±5g, integrated signal conditioning, a 2-pole low-pass filter, and onboard temperature compensation, packaged in a 16-pin SOIC (SOP-16) surface-mount case. It is one of the legacy Freescale/NXP MMA-series parts originally developed for low-G motion, tilt, and vibration sensing applications. An accelerometer is a micro-electromechanical sensor (MEMS) that converts acceleration forces into a measurable analog or digital output proportional to the applied g-force. The MMA series uses a silicon capacitive sensing cell whose capacitance changes when a proof mass deflects under acceleration, and that variation is read out through the chip's signal chain. The MMA1250EGR2 sits in the broader taxonomy of sensor ICs -> motion sensors -> accelerometers -> micromachined accelerometers, and is intended for designers who need a single-axis (Z), modest bandwidth, low-cost tilt/vibration transducer. Key differentiating features include a ±5g full-scale range (Z-axis only), an analog ratiometric output centered at mid-supply, a 2-pole on-chip low-pass filter, internal temperature compensation, and a self-test capability. The 16-SOIC package simplifies hand and reflow assembly and provides a larger land pattern than smaller DFN-style accelerometers, easing prototype rework. Internally, the device pairs a sealed micromachined sense element with a CMOS interface ASIC. Zero-g output is trimmed at the factory to roughly Vdd/2, and sensitivity is ratiometric to supply so that supply-noise errors partially cancel. The 2-pole low-pass filter limits high-frequency mechanical noise and aliases from vibration. These design choices make the MMA1250EGR2 well-suited to cost-sensitive automotive, white-goods, and industrial equipment designs. Typical applications include impact and crash detection in appliances and ruggedized equipment, vibration monitoring on motors and pumps, tilt and inclination sensing in industrial controls, and anti-theft motion alarms. Because only the Z axis is sensed, designers wanting multi-axis information normally pair this part with a sister Z-axis-only or XY-axis accelerometer. When designing with this part, place the 16-SOIC close to the ADC input, keep the supply well decoupled, and avoid airflow-driven thermal gradients on the package - sudden thermal steps can shift the offset. Confirm sensitivity in your bandwidth of interest because the internal 2-pole low-pass filter and the external load will set the effective -3 dB frequency.

RFQ پەیوەندی
MMA1260EGR2 - ±1.5g Z-Axis Micromachined Accelerometer | NXP
MMA1260EGR2

MMA1260EGR2 - ±1.5g Z-Axis Micromachined Accelerometer | NXP

The NXP (formerly Freescale) MMA1260EGR2 is a low-G, Z-axis capacitive micromachined accelerometer with ±1.55g measurement range, factory-set sensitivity between 1140 mV/g and 1260 mV/g, and a 50 Hz internal low-pass filter, housed in a 16-pin SOIC surface-mount package supplied on Tape and Reel. What is a low-G micromachined accelerometer? A low-G accelerometer is a micro-electromechanical (MEMS) sensor that measures acceleration in the sub-5g range, typically used for tilt, motion, vibration, and orientation detection. The MMA1260EGR2 is built around a silicon capacitive sensing cell whose deflection under acceleration unbalances a differential capacitor pair; on-chip signal conditioning, a 2-pole low-pass filter, and temperature compensation convert this imbalance into a ratiometric analog voltage. In the broader sensor hierarchy, it sits as: MEMS accelerometer -> inertial sensor -> motion sensor -> semiconductor. Key features include a 5.0 V single-supply operation, ratiometric output centred at 2.5 V, self-test capability that simulates a defined acceleration by applying an electrostatic force to the proof mass, and zero-g offset/full-scale span that are factory-set to remove the need for external trim components. The integrated 2-pole low-pass filter has a -3 dB cutoff near 50 Hz, suppressing out-of-band noise and high-frequency mechanical disturbances. The MMA1260EGR2 uses a surface-micromachined polysilicon sense element and a bipolar CMOS interface IC, all packaged in a 16-pin SOIC with the proof-mass sensing direction perpendicular to the PCB top surface (Z-axis). The Z-axis orientation simplifies single-axis tilt and drop/impact applications where lateral sensing is undesirable, while the ratiometric output makes the reading immune to fluctuations in supply voltage. Typical applications include appliance vibration monitoring, HDD free-fall detection, automotive alarm and tilt sensing, game-controller motion input, and portable-electronics drop detection. Its low current consumption and 5 V supply make it compatible with both 5 V MCU ADC front-ends and 3.3 V systems through a simple resistor divider. When designing with this device, place a 0.1 µF decoupling capacitor close to VDD, route the analogue output away from switching nodes, and use the self-test pin only after the supply has stabilised for at least 50 ms. As of 2026-10-15, the part is distributed through major channels with broadly stable lead times. This page synthesises distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, including a pinout reference and an application-oriented comparison table.

RFQ پەیوەندی