MC34940EG - Electric Field Imaging Device | NXP Semiconductors
MPN: MC34940EG ✓ چالاکMC34940EG گشتی
An electric field imaging device is a sensor interface that detects objects without physically touching them. Its operating chain begins with an excitation signal, continues through an externally created electric field, and concludes with a measured response indicating a change in the sensed environment. Within the broader product hierarchy, the MC34940EG is a semiconductor sensor interface, a specialized sensing IC, and an integrated circuit designed for proximity and object-detection systems.
Key features include a 120 kHz-optimized sine-wave generator, external-resistor frequency adjustment, and a supply current of 8 mA. The adjustable excitation allows the sensing system to be adapted to different electrode geometries and target materials. The 24-SOIC package provides a conventional surface-mount format for industrial control, embedded sensing, and compact instrumentation designs.
Technically, the MC34940EG uses its output to drive an electric field between external electrodes. When an object enters or leaves that field, the electrical response changes, allowing the system to infer presence, position, or material-related variation. The low-frequency sine-wave architecture avoids the need for a high-frequency RF front end while supporting cost-sensitive, non-contact sensing applications.
Typical uses include touchless activation, object-presence detection, capacitive-interface enhancement, material inspection, and industrial proximity sensing. The device is especially useful where moving mechanical contacts would be undesirable or where objects need to be detected across a physical barrier.
Designers should select resistor and capacitor values using the manufacturer’s application guidance, place the external excitation and sensing components close to the device, and keep sensitive electrode traces away from noisy switching nodes. PCB cleanliness, guarded sensing traces, and stable electrode geometry are important because parasitic capacitance can alter the measured field response.
This page combines the manufacturer datasheet details with practical application guidance, ordering-code comparisons, design notes, and direct links to technical documentation. It supports faster component selection while emphasizing that electrode geometry and signal-chain layout determine final sensing performance.
جێگرەوەکانی جێگۆڕکێ بۆ MC34940EG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
MC34940EG-R2
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC34940EG/R2
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC34940EG زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Electric field imaging device |
| Sensor Category | Image sensor interface IC |
| Excitation Frequency | 120 kHz optimized |
| ئێستای دابینکردن | 8 mA |
| Input Type | Logic |
| جۆری دەرچوون | Voltage |
| Sensing Method | Non-contact electric-field sensing |
| Excitation Waveform | Low-frequency sine wave |
| Frequency Adjustment | External resistor |
| پاکێج | 24-SOIC (0.295 inch, 7.50 mm width) |
| Packaging | Tube |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی MC34940EG 24-soic (0.295 inch, 7.50 mm width)
ڕێکخستنی پین بۆ MC34940EG (پاکێجی 24-soic (0.295 inch, 7.50 mm width)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MC34940EG.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MC34940EG گونجاوە بۆ 6 بەکارھێنانs: Non-Contact Object Presence Detection, Touchless User Interfaces, Industrial Material Presence Monitoring, Liquid and Container Level Sensing, Handheld and Portable Proximity Products, Low-Cost Sensor Prototyping.
Non-Contact Object Presence Detection
The MC34940EG fits presence detection when a target must be sensed without touching it. External electrodes establish an electric field, and the IC’s 120 kHz-optimized low-frequency sine wave enables the system to observe field changes caused by an approaching or departing object. Its 8 mA supply current supports a focused embedded implementation rather than a large sensing power budget. The host circuit can compare the output against a calibrated threshold or process the signal digitally. Electrode size, spacing, object composition, and enclosure material will determine sensitivity, so laboratory calibration is required for reliable detection.
پێشنیارکراو
Touchless User Interfaces
The MC34940EG can support touchless controls where a user approaches a panel without mechanically contacting a switch. Its external-electrode architecture allows the sensing field to be positioned behind a nonconductive surface, while the 120 kHz-optimized excitation provides a measurable response for signal conditioning. The 24-SOIC package simplifies integration into compact controller boards. In a production design, evaluate surface coatings, humidity, cable routing, and the possibility of adjacent controls influencing one field. A microcontroller or analog front end can convert the voltage output into threshold, proximity, or gesture-related decisions.
پێشنیارکراو
Industrial Material Presence Monitoring
The MC34940EG is suitable for industrial systems that need to confirm the presence of material near electrodes, including bins, chutes, rollers, or guarded working areas. The IC creates an adjustable sine-wave excitation through an external resistor and detects object-related changes in the field. Its 8 mA supply current is useful in compact machinery-control electronics, and the 24-SOIC package fits conventional surface-mount assembly. Mechanical vibration, conductive dust, moisture, and changing electrode spacing can affect performance, so the sensing baseline and threshold should be recalibrated across expected production and environmental conditions.
پێشنیارکراو
Liquid and Container Level Sensing
The MC34940EG can participate in level sensing when the liquid, container, or dielectric structure changes the electric field between external electrodes. The 120 kHz-optimized excitation and adjustable resistor setting give the designer control over the drive condition, while the voltage output can be evaluated by an analog or digital control circuit. The 24-SOIC package allows the sensing IC to be placed away from wet areas while the electrodes enter the vessel or chamber. Calibration must account for liquid conductivity, dielectric constant, foam, temperature, condensation, and residue on the electrodes, which can create drift or false detections.
پێشنیارکراو
Handheld and Portable Proximity Products
The MC34940EG can be used in portable products requiring proximity sensing without a mechanically exposed switch. Its 8 mA supply current helps limit the energy burden of battery-operated equipment, and its external-electrode method permits sensing through a molded enclosure. The 24-SOIC package provides a compact surface-mount footprint for control boards. Designers should minimize trace length and keep the electrode area away from antennas, display conductors, and high-impedance sensor lines. Sensitivity calibration is particularly important when the enclosure, coating, or hand position changes the field geometry during normal use.
پێشنیارکراو
Low-Cost Sensor Prototyping
The MC34940EG supports low-cost sensor prototyping because it combines the excitation and field-response measurement in one 24-SOIC IC while leaving electrode geometry under the designer’s control. The low-frequency sine wave is optimized for 120 kHz and can be adjusted with an external resistor, allowing the prototype to be evaluated across different electrode dimensions. A breadboard or compact analog board can expose the output for oscilloscope and microcontroller analysis. Keep prototype wiring short, maintain a stable reference connection, and document each resistor and capacitor value so the final layout can preserve the demonstrated sensing behavior.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MC34940EG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MC34940EG-R2 | MC34940EG/R2 |
|---|---|---|---|
| Device Type | Electric field imaging device | Electric field imaging device | Electric field imaging device |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 24-SOIC (0.295 inch, 7.50 mm width) | 24-SOIC | 24-SOIC |
| Excitation Frequency | 120 kHz optimized | 120 kHz optimized | 120 kHz optimized |
| Supply Current | 8 mA | 8 mA | 8 mA |
| Input Type | Logic | Logic | Logic |
| Output Type | Voltage | Voltage | Voltage |
| Sensing Principle | Non-contact electric-field detection using external electrodes | Non-contact electric-field detection using external electrodes | Non-contact electric-field detection using external electrodes |
| Frequency Adjustment | External resistor | External resistor | External resistor |
جیاکەرەوە سەرەکییەکان
- Purpose-built electric-field imaging function (بەراورد بەMC34940EG-R2)
- Compact 24-SOIC implementation (بەراورد بەMC34940EG/R2)
- External-electrode flexibility (بەراورد بەMC34940EG-R2)
تێبینییەکانی دیزاین
Place the MC34940EG and its frequency-setting and bypass components close to the external electrode connections. Keep sensitive traces short, maintain a stable return path, and avoid routing them beside switching nodes or high-current conductors. Electrode geometry and trace parasitics directly affect the measured field response, so reproduce the validated spacing, orientation, and guard arrangement when moving from prototype to production PCB.
Treat the voltage output as a field-sensitive measurement rather than a conventional fixed logic signal. Establish a baseline with the intended electrode geometry, filter noise outside the useful excitation band, and use controlled thresholding or gain in the downstream analog or digital path. Recalibrate when target distance, material, humidity, contamination, or enclosure geometry changes, since each of these conditions can alter the sensor response.
Use the manufacturer’s recommended bypass network and route it directly to the power and ground pins. The device is listed with an 8 mA supply current, but total system demand also includes the frequency-setting resistor path, output processing, and electrode drive current. Confirm the complete rail and ground requirements against the MC34940 datasheet before fixing the power-supply capacity and grounding strategy.
زانیاری پابەندبوون
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the cited technical material. The device is not presented as an automotive-qualified AEC-Q100 product.