بەرهەمەکان (78)

ADV7533BCBZ-RL7 - MIPI/DSI to HDMI 1.3 Interface | Analog Devices
ADV7533BCBZ-RL7

ADV7533BCBZ-RL7 - MIPI/DSI to HDMI 1.3 Interface | Analog Devices

Analog Devices ADV7533BCBZ-RL7 is a multifunction MIPI/DSI-to-HDMI video interface IC with a 49-ball WLCSP surface-mount package measuring 3.45 mm by 3.45 mm. It accepts MIPI DSI display input, provides HDMI 1.3 and DVI 1.0 output, supports I2C, I2S, CEA-861E, and embedded HDCP options, and operates from low-voltage supplies for portable display systems. A video interface IC converts, conditions, and manages digital display signals between a host processor and a display. In the product hierarchy, the ADV7533 is a multifunction display interface, a MIPI/DSI receiver, and an HDMI transmitter. This combination is especially useful in mobile and embedded systems where an application processor drives a high-definition display through a compact board connector rather than a full-size HDMI source. Key features include a low-power MIPI/DSI receiver, a low-power HDMI/DVI transmitter, HDMI 1.3 technology with x.v.Color support, and DVI 1.0 compatibility. The device includes an I2C master for EDID reading and 5 V tolerance on the I2C and Hot Plug detect pins. A CEC controller with an expanded three-message buffer reduces host overhead, while optional embedded HDCP keys support HDCP 1.3 content protection. The ADV7533 is fabricated on an advanced CMOS process and combines display input, transmitter output, audio handling, and display-control functions in one compact package. Its 49-ball WLCSP format supports space-constrained portable equipment, but careful escape-routing, thermal, grounding, and signal-integrity practices are required. The datasheet identifies 1.8 V and 3.3 V supplies, with a 1.2 V supply available as an option. Typical applications include mobile phones, tablets, portable media equipment, automotive infotainment displays, and other MIPI DSI systems requiring an HDMI output. The integrated EDID master and CEC controller can simplify display discovery and control tasks, while HDMI transmitter integration reduces the number of discrete interface components required near the display connector. For implementation, follow the manufacturer's recommended DSI lane routing, HDMI differential-pair geometry, supply decoupling, and ball-escape layouts. The 3.45 mm by 3.45 mm WLCSP has a dense ball pitch, so PCB mask spacing, solder-paste volume, assembly profile, and via-in-pad practices should be reviewed with the package drawing and assembly requirements. This product record combines the ADV7533 interface capabilities, exact package designation, manufacturer documentation links, and engineering guidance for MIPI DSI-to-HDMI designs. It also distinguishes the exact ADV7533BCBZ-RL7 ordering code from related ADV7533 devices that may differ in package suffix, temperature grade, or production configuration.

RFQ پەیوەندی
ADV7802BSTZ-150 12-Bit Video Decoder | Analog Devices
ADV7802BSTZ-150

ADV7802BSTZ-150 12-Bit Video Decoder | Analog Devices

The Analog Devices ADV7802BSTZ-150 is a 12-bit, multiformat 3D comb-filter video decoder, digital composite-video decoder, and graphics digitizer designed for SDTV and HDTV signal-chain processing. The device supports PAL, NTSC, and SECAM composite or S-Video inputs and converts decoded video into digital ITU-R BT.656 format. It is packaged in a 176-lead LQFP measuring 24 mm by 24 mm and uses an I²C control interface. A video decoder is an interface IC that converts analog video signals into a standardized digital representation. Within the signal path, the ADV7802 integrates three related operations: 3D comb filtering removes cross-color artifacts from composite video, multiformat decoding extracts luminance and chrominance information, and graphics digitization converts graphics or graphics-related video signals into digital data. This integrated role reduces the need for separate comb-filter and digitizer stages in broadcast, industrial, and professional video equipment. The principal features of the ADV7802 include 12-bit processing, support for PAL, NTSC, and SECAM standards, composite and S-Video handling, ITU-R BT.656 digital output, 3D comb filtering, and graphics-digitizer functionality. Its multiformat architecture allows one decoder design to cover several legacy television standards, while the graphics-digitizer section extends the device beyond basic broadcast decoding. The integrated I²C interface provides a suitable control path for programmable video equipment. The -150 suffix identifies the manufacturer's speed grade, while BSTZ identifies the 176-lead LQFP package option. The large 24 mm by 24 mm package provides 176 external leads for the required analog inputs, digital data interfaces, clocks, controls, and supply connections. Compared with a discrete decoder arrangement, the highly integrated ADV7802 reduces component count and simplifies synchronization between comb filtering, decoding, and digitization. Thermal and layout design must nevertheless account for the analog and digital signals sharing one large fine-pitch package. Typical uses include broadcast video conversion equipment, professional video routers, industrial inspection systems, security-video interfaces, television manufacturing and test systems, and legacy video standards-conversion products. In a composite-video capture design, the ADV7802 can accept analog composite input, perform decoding and 3D comb filtering, and provide an ITU-R BT.656 output to a digital video processor. In a graphics-digitization product, the same family can support digital acquisition of graphics or graphics-related video content. PCB implementation should preserve controlled impedance on digital video nets and maintain short, separated analog and digital return paths. Follow the Analog Devices ADV7802 data sheet for the pin-description table, supported operating modes, clock requirements, reference circuitry, supply sequencing, and recommended decoupling values. Use the EVAL-ADV7802 evaluation board as an initial hardware and firmware reference when validating signal integrity, register configuration, and multiformat decoding behavior. This product page combines the ADV7802 family description with package, interface, standards, and drop-in ordering guidance. It also provides practical design notes and a parameter comparison to distinguish speed-grade alternatives from devices with different decoder architectures, helping engineers select the correct 176-lead LQFP option before board layout begins.

RFQ پەیوەندی
ATMXT1386E-Z2UIR - 1386-Node maXTouch Controller | Microchip
ATMXT1386E-Z2UIR

ATMXT1386E-Z2UIR - 1386-Node maXTouch Controller | Microchip

The Microchip Technology ATMXT1386E-Z2UIR is a capacitive touch screen controller from the maXTouch platform, implementing a 1386-node multi-chip solution (4 chips) that supports up to 16 simultaneous touches with I2C interface, a 150 Hz touch response rate, and support for screens up to 15.6 inches, supplied in Tape & Reel packaging. A capacitive touch screen controller is an integrated circuit that measures changes in capacitance across a touch sensor grid to determine finger or stylus position. Within the power-management and human-interface IC hierarchy, touch controllers sit between the raw sensor substrate and the host application processor, converting analog charge-transfer measurements into digital touch coordinates. The maXTouch family pairs charge-transfer analog front ends with a powerful 32-bit AVR microcontroller core for on-chip touch processing. Key features include the 1386-node sensing capacity delivered by a 4-chip multi-chip architecture, unlimited touch reporting up to 16 simultaneous touches, automotive qualification, and an operating temperature range of -40C to +85C. The high-performance architecture enables fast response at 150 Hz scan rate, supporting large-format displays with low latency. Technically, the device combines Microchip charge-transfer acquisition technology with 32-bit AVR processing, offloading touch detection, noise filtering, and gesture processing from the host CPU. Communication with the host uses an I2C interface. The -E variant is the automotive-qualified version of the ATMXT1386 platform, making it suitable for harsh automotive cabin environments where consumer-grade controllers would not meet reliability requirements. Typical applications include automotive center-stack touch displays, in-vehicle infotainment (IVI) panels up to 15.6 inches, industrial HMI panels requiring multi-touch, and large-format consumer touch screens. Automotive qualification and the wide -40C to +85C temperature range make the -Z2UIR variant particularly appropriate for vehicle cockpit systems. Design consideration: the multi-chip (4-chip) solution requires careful PCB floor planning of the sensor traces and inter-chip routing; firmware/configuration objects must be programmed to match the specific sensor panel geometry. Note that Microchip lists ATMXT1066T2 as the recommended alternative touch controller for new designs. This page synthesizes distributor availability, the manufacturer-recommended alternative, and practical design notes not consolidated in the manufacturer product page.

RFQ پەیوەندی
ATMXT3432S-M-Z2UR - maXTouch Touch Controller | Microchip
ATMXT3432S-M-Z2UR

ATMXT3432S-M-Z2UR - maXTouch Touch Controller | Microchip

The Microchip Technology ATMXT3432S-M-Z2UR is a 32-bit capacitive touch screen controller from the maXTouch mXT3432S family, optimized for projected-capacitive touchscreens up to 17.3 inches and enabling shieldless touch designs for cost- and space-optimized products. A capacitive touch controller is an interface IC that measures tiny capacitance changes on a touch sensor grid, converts the raw mutual-capacitance data into calibrated touch coordinates, and reports gestures to a host processor. Within the interface IC hierarchy, it sits alongside touch screen converters and controllers, bridging the analog sensor domain and the digital system domain in human-machine interface designs. Key characteristics include the 32-bit processing core that runs Microchip maXTouch touch algorithms on-chip, support for screen sizes up to 17.3 inches, and shieldless operation that removes the shielding layer from the sensor stack - reducing stack-up cost and module thickness. The maXTouch family is known in the industry for superior noise immunity and a rich feature set including gesture detection, wet-finger tracking, and gloved-touch robustness. The mXT3432S generation integrates the analog front end, charge amplifiers, and a digital signal processing pipeline that performs per-channel acquisition, automatic mutual-capacitance baseline tracking, and noise filtering in the frequency domain. This architecture allows stable touch operation in the presence of display noise from LCD and OLED panels, which is a common failure mode for lower-end touch ICs. Firmware for touch tuning is supplied through Microchip's maXTouch development ecosystem. Typical applications include consumer touch monitors, industrial human-machine interfaces (HMI), smart appliances, white goods, and commercial kiosks - anywhere a panel up to 17.3 inches needs robust multi-touch response without a shield layer. When designing with this controller, budget board area and sensor routing for the full channel count, and plan for touch tuning using Microchip's tuning tools early in the project, since sensor stack-up (ITO pattern, cover lens thickness) strongly affects final performance. This page synthesizes distributor availability data, the manufacturer-recommended alternative (ATMXT2952TD), and practical integration guidance not consolidated in the manufacturer datasheet alone.

RFQ پەیوەندی
DP83822IFRHBR - 10/100Mbps Ethernet PHY 16kV ESD | TI
DP83822IFRHBR

DP83822IFRHBR - 10/100Mbps Ethernet PHY 16kV ESD | TI

The Texas Instruments DP83822IFRHBR is a low-power, robust 10/100-Mbps Ethernet physical layer transceiver (Ethernet PHY) with fiber support and 16-kV IEC ESD protection, housed in a 32-pin VQFN (RHB) 5.00 mm x 5.00 mm package rated from -40C to +85C. An Ethernet PHY transceiver is the physical-layer device in the Ethernet stack that converts digital MAC data into signals suitable for transmission over twisted-pair copper or optical fiber media. In the network hierarchy, the PHY sits between the Media Access Controller (MAC) and the physical medium, handling encoding, line driving, equalization, and link detection per the IEEE 802.3 10BASE-Te/100BASE-TX standards. Ethernet PHYs are foundational building blocks of industrial automation, factory networking, and connected embedded systems. Key features of the DP83822IFRHBR include low power consumption enhanced by Energy-Efficient Ethernet (EEE), Wake-on-LAN (WoL), and programmable energy-saving modes; 16-kV system-level ESD robustness for harsh industrial environments; fiber-optic media support in the IF variant; and pin-to-pin upgradeability from the TLK105, TLK106, TLK105L, and TLK106L 10/100-Mbps Ethernet PHYs. These characteristics reduce system power budgets and improve reliability in electrically noisy installations. Architecturally, the DP83822 integrates the analog line drivers, receivers, and adaptive equalization needed for robust 100BASE-TX links, together with a standard MII/RMII/SNI serial management interface for connection to virtually any MAC or FPGA-based MAC implementation. Programmable LED outputs, interrupt support, and extensive register-level configuration allow fine-grained control of link behavior and diagnostics. Typical applications include industrial Ethernet nodes such as PLCs, motor drives, and I/O modules; building automation and security cameras; and general embedded networking where 10/100-Mbps connectivity, low power, and ESD robustness are required. The fiber-supported IF variant suits electrically hostile or long-distance links. For design, provide a stable 3.3V supply domain with proper decoupling and follow TI's reference layout guidance for the magnetics and MDI routing to preserve signal integrity and ESD performance. This page synthesizes distributor listings, cross-reference research, and practical drop-in alternative analysis not found on the manufacturer datasheet alone.

RFQ پەیوەندی
DP83TC816-Q1 - 100Base-T1 Automotive Ethernet PHY | TI
DP83TC816-Q1

DP83TC816-Q1 - 100Base-T1 Automotive Ethernet PHY | TI

The Texas Instruments DP83TC816-Q1 is an automotive-qualified 100Base-T1 Ethernet physical layer transceiver compliant with IEEE 802.3bw and the Open Alliance (OA), delivering 100 Mbps full-duplex communication over a single unshielded or shielded twisted-pair cable in a 36-pin VQFN (6x6 mm) package. An Ethernet PHY (physical layer transceiver) is the IC that converts digital MAC-layer data into analog signals suitable for transmission over a physical cable medium. Within the network stack hierarchy - MAC, PHY, transformer/connector - the PHY sits between the media access controller and the twisted-pair link, handling encoding, equalization, echo cancellation, and link training. In automotive systems it enables the single-pair Ethernet (SPE) topology standardized as 100Base-T1 (also known as IEEE 802.3bw and formerly BroadR-Reach). Key features include xMII interface flexibility (RGMII and SGMII per the product brief), IEEE 802.1AS gPTP time-stamping support, AVB clock generation for audio-video-bridging networks, and TC10 sleep-wake power management for reduced system standby current. These functions make the device suited to zonal and domain controller architectures where synchronized, low-latency in-vehicle networking is required. Technically, the DP83TC816-Q1 performs all physical-layer functions required to transmit and receive data over single twisted-pair cables, including analog front-end signal conditioning and DSP-based equalization, while providing the MAC-facing digital interface options that simplify connection to automotive Ethernet switches and SoCs. Typical applications include automotive domain and zonal controllers, ADAS sensor aggregation links, camera and display connectivity over single twisted pair, and gateway ECUs bridging 100Base-T1 links to other in-vehicle network domains. When designing the board, keep the MDI pair routing impedance-controlled (100-ohm differential) and follow TI's reference design layout for the decoupling network around the VQFN-36 supply pins to meet OA EMC conformance. This page synthesizes distributor data, verified datasheet information, drop-in same-family alternatives, and practical migration guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DP83TG721R-Q1 - 1000BASE-T1 Automotive Ethernet PHY | TI
DP83TG721R-Q1

DP83TG721R-Q1 - 1000BASE-T1 Automotive Ethernet PHY | TI

The Texas Instruments DP83TG721R-Q1 is an automotive-qualified 1000BASE-T1 Ethernet physical layer (PHY) transceiver delivering 1 Gbps over a single unshielded or shielded twisted-pair cable, packaged in a 36-pin VQFN (6x6 mm) with advanced TSN and AVB features. An Ethernet PHY (physical layer transceiver) is the IC that converts the digital MAC-layer frames of a network processor or microcontroller into analog signals suitable for transmission over copper cable. In a vehicle network hierarchy, the PHY sits between the Ethernet switch/MAC and the single twisted-pair (SPE) wiring harness, making it the foundation block of automotive in-vehicle networking (IVN) architectures such as domain/zonal E/E topologies. Key features of the DP83TG721R-Q1 include IEEE 802.3bp and Open Alliance compliance, full 1000BASE-T1 operation over a single twisted pair, TC-10 sleep/wake power management, IEEE 802.1AS time synchronization, and advanced Time-Sensitive Networking (TSN) and Audio Video Bridging (AVB) capabilities. The device can also generate FSYNC/SCLK wall-clock-synchronized outputs for I2S/TDM8 audio interfaces, a differentiating feature for in-vehicle audio networks. The transceiver provides all physical layer functions required to transmit and receive data over single twisted-pair cable, and is electrically compatible with TI's 100BASE-T1 and 1000BASE-T1 PHY families, enabling design scalability: one PCB footprint can serve both 100 Mbps and 1 Gbps links. This multi-speed compatibility reduces harness and board re-qualification effort across vehicle platforms. Typical applications include ADAS camera and sensor links, zonal gateway ECUs, infotainment and audio networks, and in-vehicle robotics platforms requiring deterministic gigabit connectivity. The AEC-Q100-oriented automotive qualification and Open Alliance conformance target harsh automotive EMC environments. A key design consideration: the publicly available short-form datasheet does not include the complete pinout and application circuit, as confirmed on the TI E2E forum; engineers should plan schematic capture around TI's NDA documentation. Note also that some pins on the related DP83TG720 are NC, so pin functions must be re-verified when reusing layouts. This page synthesizes verified distributor data, drop-in alternatives, migration guidance from TI E2E forum threads, and practical design notes not found in the manufacturer's short-form datasheet.

RFQ پەیوەندی
DS15BR400TVSX/NOPB - 4-Ch LVDS Buffer 2Gbps | TI
DS15BR400TVSX/NOPB

DS15BR400TVSX/NOPB - 4-Ch LVDS Buffer 2Gbps | TI

The Texas Instruments DS15BR400TVSX/NOPB is a 4-channel LVDS buffer/repeater with pre-emphasis supporting data rates up to 2 Gbps, powered from a single 3.0V to 3.6V supply in a 48-pin TQFP (PFB, 7x7 mm) package. Each channel delivers a typical propagation delay of 1.0 ns with 3 pF input capacitance, and the device consumes a typical 215 mA supply current (approximately 578 mW) across the full -40C to +85C industrial temperature range. An LVDS (Low-Voltage Differential Signaling) buffer/repeater belongs to the broader family of high-speed interface ICs, sitting within the signal-conditioning hierarchy between a differential line driver and the receiving ASIC or serializer. Its role is to regenerate degraded differential signals, restoring amplitude and sharpness so that data can traverse lossy media such as backplanes and cables without violating eye-mask requirements at the receiver. Key differentiating features include the 2 Gbps per-channel data rate, pre-emphasis that overcomes ISI (inter-symbol interference) jitter introduced by lossy transmission media, and a flow-through pinout that minimizes internal device jitter while dramatically simplifying PCB routing. The differential inputs interface directly to standard LVDS and Bus LVDS signal levels, such as those generated by TI 10-, 16-, and 18-bit serializers, making the device a natural companion in SerDes-based video and data-conversion links. Architecturally, the DS15BR400 uses high-speed differential input buffers followed by output drivers with programmable-style pre-emphasis compensation. Because the signal path is analog buffer-based rather than clock-and-data-recovery based, latency is deterministic and low (1.0 ns typical), which matters in phase-critical pixel-clock and sample-clock distribution. High-speed data paths with flow-through pin ordering keep intra-pair skew tight and reduce via stubs. Typical applications include flat-panel display and medical-imaging backplanes carrying FPD-Link or OpenLDI-style LVDS streams, high-speed data acquisition and ADC-to-processor links, and industrial camera or video router systems where 2 Gbps serial streams cross connectors and cable assemblies. When designing with this part, control the inter-pair skew budget and use controlled-impedance 100-ohm differential routing; pre-emphasis settings should be validated on your specific backplane attenuation, since over-emphasis can increase crosstalk at the far end. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DS90C363AMTDX - 18-Bit 65MHz LVDS Transmitter | TI
DS90C363AMTDX

DS90C363AMTDX - 18-Bit 65MHz LVDS Transmitter | TI

Texas Instruments DS90C363AMTDX is a 3.3 V programmable LVDS flat-panel display link transmitter with 18 data bits, a 65 MHz maximum pixel clock, three LVDS drivers, and 21 differential inputs in a 48-pin TSSOP package. It converts parallel display data into low-voltage differential-signaling lanes for reliable transfer between a graphics source and an external display panel. An LVDS FPD-Link transmitter is an interface IC within the broader signal-chain hierarchy of display controller, interface transceiver, semiconductor, and electronic system. FPD-Link carries wide parallel data over fewer differential pairs by transmitting balanced logic signals across twisted-pair cables or controlled-impedance PCB traces. This approach reduces signal count while supporting reliable communication over a compact display interface. The DS90C363AMTDX provides a programmable 18-bit flat-panel link, a 65 MHz operating limit, and a 3 V to 3.6 V supply range. Its three LVDS outputs support multiple data lanes, while 21 inputs accommodate the parallel data, control, clock, and configuration functions required by an FPD-Link transmitter. Differential signaling improves noise immunity compared with single-ended transmission in display environments where pixel-clock edges must remain clean. The transmitter architecture uses parallel-to-serial conversion and low-voltage differential outputs to support panel data transfer. Programming controls permit adaptation to supported display timing and link configurations, while the 65 MHz clock ceiling defines the usable data-transfer envelope. Designers must observe the manufacturer’s input, output, timing, and power-sequencing requirements to preserve signal integrity from the source device through the cable or PCB connection to the receiver and panel interface. Typical applications include LCD monitor and flat-panel display controllers, industrial human-machine interfaces, automotive display systems, digital signage, and embedded graphics platforms. The device is particularly relevant when a design requires an 18-bit FPD-Link transmitter rather than a general-purpose parallel-to-LVDS serializer. Its dedicated display functions simplify source-side implementation when the receiving panel expects compatible FPD-Link signaling. PCB implementation should keep the transmitter close to the graphics engine, use controlled-impedance differential routing, and provide the decoupling and layout specified by the TI DS90C363 manufacturer datasheet. Cable and connector selection also matters because skew and loss can degrade the differential signal at higher pixel-clock rates. The 48-TSSOP footprint supports conventional surface-mount assembly but requires careful fanout from the source component to the LVDS connector. This product page combines the exact orderable MPN, manufacturer specifications, package details, sourcing information, interface application guidance, and design considerations. It also distinguishes the target from documented same-family alternatives and identifies where an engineer must confirm revision-specific behavior before approving a direct substitution.

RFQ پەیوەندی
DS90C383AMTD - 3.3V LVDS Transceiver | Texas Instruments
DS90C383AMTD

DS90C383AMTD - 3.3V LVDS Transceiver | Texas Instruments

Texas Instruments DS90C383AMTD is a 3.3 V programmable LVDS flat-panel-display link transceiver with one transmitter and one receiver, a 24-bit parallel data interface, and a 65 MHz link clock. The device is packaged in a 56-pin TSSOP and is designed for point-to-point digital video connections using low-voltage differential signaling. An LVDS transceiver is an interface IC that converts parallel CMOS/TTL data into low-voltage differential signals for transmission between circuit boards or display modules. FPD-Link combines parallel data and clock transmission over differential pairs, while LVDS provides low-voltage signaling, common-mode rejection, and reduced EMI sensitivity compared with single-ended interconnects. Within the signal-chain hierarchy, this device is an FPD-Link serializer/deserializer, an LVDS interface transceiver, and a semiconductor-level display connectivity solution. The DS90C383AMTD operates from a 3 V to 3.6 V supply and supports programmable LVDS output described in the manufacturer datasheet. Its nominal 65 MHz FPD-Link clock supports transfer of a 24-bit display data stream, while the transmitter and receiver architecture allows the device to support both serialization and deserialization functions. The 56-TSSOP package provides a conventional surface-mount interface for display-controller and flat-panel systems. Its architecture is centered on parallel CMOS/TTL signaling at the host interface and differential LVDS signaling across the panel link. Backward compatibility with existing 5 V FPD-Link systems is discussed in the manufacturer datasheet, providing an upgrade path toward 3.3 V equipment. The exact programmable output behavior, clocking requirements, and system timing should be implemented from the timing diagrams and pin descriptions in that datasheet. Typical applications include small-format LCD panel links, digital video interface connections, industrial flat-panel displays, and embedded display systems that connect a graphics controller or FPGA to a display. Using the FPD-Link architecture can reduce the number of single-ended traces crossing between boards while supporting a deterministic parallel-data and differential-link structure. Designers should preserve the required differential pair geometry, provide suitable bypass capacitance, and observe the supply and ground requirements shown in the manufacturer datasheet. LVDS receiver and transmitter layout, connector transitions, and cable routing should be treated as an impedance-controlled interface rather than as ordinary low-speed digital routing. This page combines the manufacturer interface description, available supply and package information, application guidance, and a conservative engineering assessment of replacement options. It also distinguishes true same-footprint alternatives from related interface ICs that require circuit changes, helping designers evaluate PCB reuse without confusing protocol similarity with pin compatibility.

RFQ پەیوەندی
DS90CF383AMTDX - 3.3V 24-Bit FPD-Link LVDS Transceiver
DS90CF383AMTDX

DS90CF383AMTDX - 3.3V 24-Bit FPD-Link LVDS Transceiver

The Texas Instruments DS90CF383AMTDX is a 3.3 V, 24-bit flat panel display FPD-Link and LVDS transceiver operating up to 65 MHz in a 56-TSSOP package. It converts 28-bit parallel CMOS/TTL data into four differential LVDS data streams and transfers a fifth differential clock link. The device also provides four LVDS data receivers for communication in the opposite direction, creating a bidirectional parallel-to-serial and serial-to-parallel interface in one component. An FPD-Link transceiver is a display-interface IC that carries high-speed digital video and control traffic between a graphics or video source and a flat-panel display. In the signal chain, this device sits between parallel logic and a low-voltage differential display link. LVDS uses small-amplitude differential signaling to reduce common-mode noise, provide good electromagnetic-immunity behavior, and support reliable point-to-point cable or PCB connections at high data rates. The DS90CF383AMTDX supports a 3 V to 3.6 V supply range and a 65 MHz operating clock, giving the parallel interface a theoretical aggregate payload rate of 1.56 Gbit/s across the four transmitted data lanes. Its 28/4 architecture accommodates 24 bits of pixel or control data together with the associated clock, control, and enable functions. The 56-TSSOP surface-mount package also includes an exposed-thermal-pad option in the family, supporting improved heat transfer on multilayer PCB designs. Typical uses include small-format LCD panels, industrial HMIs, medical display controllers, automotive navigation displays, and video-processing boards that connect an LVDS display port to a parallel CMOS source. The same bidirectional interface can also be considered for point-to-point LVDS links when a compatible receiving system recognizes the device's transmission format and clocking scheme. PCB implementation requires careful treatment of the high-speed differential nets. Route each LVDS pair as a tightly coupled, length-matched pair, provide a continuous reference plane, and avoid placing test pads or unrelated traces in the differential escape region. Keep the logic supply and the LVDS connector ground return tied through a low-impedance plane rather than relying on narrow neck-down paths. This product page brings together the device function, verified ordering information, drop-in alternatives, and application-specific engineering guidance so engineers can evaluate the DS90CF383AMTDX before integrating it into an LVDS display interface.

RFQ پەیوەندی
DS90CR211MTDX - 21-Bit LVDS Channel Link Transmitter | TI
DS90CR211MTDX

DS90CR211MTDX - 21-Bit LVDS Channel Link Transmitter | TI

The DS90CR211MTDX is a 21-bit Channel Link transmitter from Texas Instruments that converts 21 bits of CMOS/TTL data into three LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams, allowing the receiver to recover the clock and data with minimal skew. The device operates from a 4.5V to 5.5V supply and is available in a 48-pin TSSOP package (48-TFSOP, 0.240", 6.10mm width). It supports data rates up to 840 Mbps, making it suitable for high-speed point-to-point data transmission in display interfaces, industrial cameras, and medical imaging systems. Channel Link is a proprietary high-speed digital interface technology developed by National Semiconductor (now part of Texas Instruments) that reduces the number of parallel data lines by serializing them into LVDS pairs. This technology is widely used in flat panel displays, digital video interfaces, and other applications requiring high bandwidth over a limited number of wires. The DS90CR211MTDX is part of the Channel Link family, which includes transmitters and receivers that work together to provide a complete serialization/deserialization solution. Key features of the DS90CR211MTDX include a 21-bit parallel input, three LVDS data outputs plus one clock output, and a maximum data rate of 840 Mbps. The device has a typical power consumption of [DATA_NEEDED: power consumption] and supports a wide operating temperature range of -40°C to +85°C. The LVDS outputs feature low voltage swing (typically 350 mV) and high noise immunity, making the device ideal for noisy industrial environments. The transmitter also includes a power-down mode to reduce power consumption when not in use. The DS90CR211MTDX uses a phase-locked loop (PLL) to generate the high-speed serial clock from the parallel input clock. The PLL ensures low jitter and accurate data alignment, which is critical for reliable data transmission at high speeds. The device also features built-in termination resistors on the LVDS outputs, simplifying PCB layout and reducing external component count. The TSSOP package offers a compact footprint with a 0.65mm lead pitch, suitable for space-constrained designs. Typical applications include flat panel displays, digital video interfaces, industrial cameras, medical imaging, and automotive infotainment systems. The device is particularly well-suited for applications requiring high-speed data transfer over long distances with minimal EMI, as LVDS signaling inherently provides low electromagnetic interference. The DS90CR211MTDX is also used in test and measurement equipment where high-speed data acquisition is required. When designing with the DS90CR211MTDX, ensure that the LVDS output traces are impedance-matched (typically 100Ω differential) and kept as short as possible to minimize signal integrity issues. The power supply should be well-decoupled with 0.1µF and 10µF capacitors placed close to the VCC pins. The PLL requires a clean power supply to achieve optimal jitter performance, so avoid routing the power traces near high-speed switching signals.

RFQ پەیوەندی
DS90CR282MTDX - 28-Bit LVDS Channel Link Receiver | Texas Instruments
DS90CR282MTDX

DS90CR282MTDX - 28-Bit LVDS Channel Link Receiver | Texas Instruments

The Texas Instruments DS90CR282MTDX is a 28-bit Channel Link receiver that converts four LVDS (Low Voltage Differential Signaling) data streams back into 28 bits of CMOS/TTL parallel data. It is designed to pair with the DS90CR281 transmitter, which serializes 28 bits of CMOS/TTL data into four LVDS data streams along with a phase-locked transmit clock. The receiver operates from a 4.5V to 5.5V supply and is housed in a 56-pin TSSOP (TFSOP) package, making it suitable for high-speed point-to-point data transmission over twisted-pair or PCB traces. Channel Link is a proprietary high-speed digital interface technology developed by National Semiconductor (now part of Texas Instruments) that reduces the number of parallel data lines by serializing them into differential pairs. This technology is widely used in flat panel displays, digital video interfaces, and other high-bandwidth applications where reducing cable count and EMI is critical. The DS90CR282MTDX is a receiver in this family, providing the deserialization function that reconstructs the original parallel data bus. Key features of the DS90CR282MTDX include support for data rates up to 66 MHz (as per the DS90CR285 transmitter), a 28-bit parallel interface, and LVDS signaling that provides low EMI and high noise immunity. The device includes an internal PLL for clock recovery and supports a power-down mode to reduce quiescent current. The 56-pin TSSOP package offers a compact footprint for space-constrained designs. Technically, the DS90CR282MTDX uses a differential signaling scheme with a nominal 3.5mA output current and a typical 100-ohm termination resistor at the receiver input. The receiver's input common-mode voltage range is designed to accommodate ground potential differences between transmitter and receiver. The device is specified for the commercial temperature range (0°C to 70°C) and is available in tape and reel packaging. Typical applications include flat panel display interfaces, digital video links, and industrial imaging systems where high-speed serial data transmission over short distances is required. The DS90CR282MTDX is often used in conjunction with the DS90CR281 transmitter to form a complete Channel Link solution. When designing with this device, ensure proper termination of the LVDS lines with 100-ohm resistors close to the receiver inputs, and maintain controlled impedance on the PCB traces to minimize signal reflections. The power-down pin can be used to reduce power consumption when the link is idle.

RFQ پەیوەندی
DS90CR584MTDX - 65MHz FPD-Link LVDS Receiver | Texas Instruments
DS90CR584MTDX

DS90CR584MTDX - 65MHz FPD-Link LVDS Receiver | Texas Instruments

The Texas Instruments DS90CR584MTDX is a 65 MHz FPD-Link LVDS receiver that converts four differential LVDS data streams into 28 CMOS/TTL output bits. Designed for 24-bit color flat-panel display systems, it uses a 4.5 V to 5.5 V supply and is packaged in a 56-pin TSSOP with gull-wing leads. The receiver also complements the DS90CR583 transmitter in the National Semiconductor flat-panel display interface family. A flat-panel display link is a high-speed serial interface that transfers pixel data between a display controller and a panel timing controller. The DS90CR583 transmitter converts 28 CMOS/TTL input bits into four LVDS streams and transmits a phase-locked clock in parallel over a fifth LVDS link. The DS90CR584 provides the receiving side of that architecture, recovering 28 parallel CMOS/TTL bits from the differential data streams. LVDS is a low-voltage differential-signaling technology used to reduce common-mode noise and support reliable high-speed data transfer over a compact cable or PCB connection. The principal device characteristics are a 65 MHz operating link rate, four LVDS receiver channels, 28 parallel CMOS/TTL outputs, a 4.5 V to 5.5 V supply range, and a 56-pin TSSOP package. Its four differential data inputs are intended to work with the four data lanes sent by the corresponding transmitter, while the separately transmitted clock supports recovery of the parallel data. The 24-bit color designation relates to the display data carried by the 28-bit parallel interface, which can accommodate color information and associated control bits. The DS90CR583 and DS90CR584 form an LVDS 24-bit color Flat Panel Display Link operating at 65 MHz. This arrangement separates high-speed differential transmission from the parallel logic-side interface: the transmitter accepts parallel CMOS/TTL data, while the receiver returns differential lanes to parallel CMOS/TTL data. Because the receiver is specified for four data streams, board designers should treat lane routing, connector pin assignments, and clock synchronization as an integrated transmitter-receiver design rather than treating each IC independently. Typical uses include flat-panel monitor and display-controller boards, industrial panel interfaces, and other systems that pair the receiver with a compatible DS90CR583-family transmitter. The interface can be useful when a cable connection is preferable to a wide parallel bus because the four differential data lanes reduce signal-count requirements while supporting deterministic clock forwarding. System qualification should include the complete cable, connector, receiver, transmitter, and display-timing chain. Layout is especially important in this high-speed differential interface. Route each LVDS pair as a tightly coupled, impedance-controlled pair and keep the receiver and transmitter ground references properly connected. Avoid adding unnecessary stubs, test pads, or long branches to the differential nets. Decoupling and signal-return paths must also follow the layout guidance in the manufacturer datasheet, particularly around the clock and data inputs. This page combines the device identity, electrical limits, package information, interface use cases, and lifecycle status for the DS90CR584MTDX. It also provides engineering guidance for display-link implementation, replacement assessment, sourcing through the Request a Quote form, and comparison with related interface devices. Because this exact orderable MPN is listed as obsolete, designers should verify availability and consider an approved redesign rather than assuming that every similar line-driver or LVDS receiver is electrically interchangeable.

RFQ پەیوەندی
FMS6502 - 8x6 Video Switch Matrix TSSOP-24 | onsemi
FMS6502

FMS6502 - 8x6 Video Switch Matrix TSSOP-24 | onsemi

The onsemi FMS6502 is an 8-input, 6-output video switch matrix with integrated output drivers, input clamp, and bias circuitry, housed in a 24-pin TSSOP (MTC) package. It routes any of eight video inputs to any of six outputs under I2C control, with one output driver per output channel. A video switch matrix (also called a crosspoint switch) is an analog routing IC that belongs to the video conditioning and audio/video ASSP family within the broader interface IC category. Its role in the system hierarchy is to sit between multiple video sources (such as decoders, tuners, or SoC outputs) and multiple video sinks (encoders, displays, or recorders), replacing banks of discrete analog multiplexers and buffer amplifiers. Key features include an 8x6 crosspoint architecture in which each input can be routed to one or more outputs, while only one input may drive any given output at a time, preventing bus contention. Each input supports an integrated clamp option that sets the output sync tip level of video with sync to approximately 300 mV, which is essential for maintaining correct black-level reference in composite and S-Video signals. Alternatively, the input may be internally biased to center outputs without sync (Chroma, Pb, Pr) at a defined mid-level, supporting component video formats. Architecturally, the device integrates output drivers on every output, eliminating the external buffer stages that discrete crosspoint solutions require. The I2C serial interface allows full matrix reconfiguration, and the onsemi VIPDEMO evaluation platform supports single-register read and write operations for I2C bring-up and debugging. Typical applications include set-top boxes, DVD recorders and players, video servers, CCTV/security video routing, automotive rear-seat entertainment, and any multi-source/multi-display video system requiring glitch-free source selection. Design consideration: choose clamp mode for signals containing sync and bias mode for sync-less component signals; incorrect mode selection shifts the DC operating point of the downstream video path. Verify I2C register maps against the onsemi datasheet before board bring-up. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
FUSB340TMX - USB 3.1 10 Gbps 2:1 Data Switch | onsemi
FUSB340TMX

FUSB340TMX - USB 3.1 10 Gbps 2:1 Data Switch | onsemi

The onsemi FUSB340TMX is a USB 3.1 SuperSpeed 2:1 data switch supporting 5 Gbps and 10 Gbps data rates, housed in an 18-pin TMLP (2x2.8 mm) package. Targeted at the mobile device market, it routes SuperSpeed differential pairs between a USB Type-C receptacle and either an upstream hub or sideband connection, enabling reversible-cable topologies without an extra mux. The device operates across USB SuperSpeed Gen1 (5 Gbps), Gen2 (10 Gbps), PCIe Gen3, SATA, DisplayPort 1.3, and Fibre Channel protocols, making it suitable as a generic 10 Gbps differential switch. A USB 3.1 data switch is a high-speed analog multiplexer that routes SuperSpeed differential pairs (TX/RX) between two physical paths while preserving signal integrity at multi-gigahertz frequencies. As a Type-C accessory switch, it is one of several functional blocks in a USB Type-C implementation: Type-C controller -> high-speed data switch -> SBU/AUX switch -> USB-PD controller. The FUSB340TMX specifically occupies the high-speed data mux role, enabling USB-C reversible-cable operation in phones, tablets, and laptops. Key features include 10 Gbps SuperSpeed Gen2 support, 2:1 switch topology, low insertion loss and return loss over the SuperSpeed frequency range, channel-to-channel skew designed for USB 3.1 compliance, and an operating range suitable for portable and battery-powered designs. The compact 2x2.8 mm TMLP package and minimal external component count simplify PCB layout in space-constrained mobile designs. The FUSB340 uses an adaptive signal-path topology that maintains 50-ohm characteristic impedance in both the active and idle states to minimize reflections. The wide -3 dB bandwidth accommodates PCIe Gen3 (8 Gbps) and DisplayPort 1.3 (8.1 Gbps) RBR/HBR signalling with margin, making the part usable as a generic high-speed differential mux beyond strict USB roles. Typical applications include USB Type-C reversible-cable multiplexers, mobile phone and tablet accessory switches, USB 3.1 Gen2 hub fan-out, notebook sideband routing, and Thunderbolt 3 alternate-mode signal multiplexing. The part is also used in docking stations that share USB SuperSpeed lines between multiple hosts. When designing with the FUSB340TMX, keep the SuperSpeed differential traces length-matched to within 150 mils and route them over a continuous ground reference. Place the decoupling capacitor within 2 mm of the supply pin, and avoid routing any digital control lines directly under the high-speed traces to prevent crosstalk. This page synthesizes distributor pricing, drop-in alternative parts from the same TI and Microchip ecosystems, and practical layout notes that are not present in the manufacturer datasheet.

RFQ پەیوەندی
ISOW6441 - 150Mbps Isolator w/ Integrated DC-DC | TI
ISOW6441

ISOW6441 - 150Mbps Isolator w/ Integrated DC-DC | TI

The Texas Instruments ISOW6441 is a low-emissions, reinforced, quad-channel (3 forward / 1 reverse) digital isolator with an integrated high-efficiency DC-DC converter, delivering up to 150 Mbps data rate and up to 550 mW of isolated output power in a 16-pin wide SOIC (DW) package. It targets space-constrained isolated designs where a separate isolated power supply is impractical. A digital isolator provides galvanic isolation between two circuits while allowing digital signals to cross the isolation barrier via capacitive coupling, without a direct electrical connection. Within the isolation component hierarchy, the ISOW6441 belongs to the power-integrated digital isolator family - combining signal isolation with isolated power delivery, a subset of interface and signal isolation ICs. Key features include 150 Mbps data rate, 5000 Vrms isolation rating per UL 1577, 200 kV/us common-mode transient immunity (CMTI), and a selectable isolated output voltage of 3.3V or 5V with low 30 mV output ripple. The integrated DC-DC converter is emission-optimized to meet CISPR 32 Class-B on a 2-layer board, a best-in-class achievement per TI application note SBAA810. Technically, the ISOW6441 uses TI proprietary capacitive isolation technology for high-speed, low-power data transfer, and a push-pull converter topology with an integrated transformer for efficient, low-EMI power delivery. Default output is high on input signal loss (non-F variant); the F-suffix ISOW6441F defaults low. Operating temperature spans -40C to +125C. Typical applications include isolated SPI in industrial automation, isolated UART links, motor drive gate-driver supplies, and power-supply feedback isolation, where the integrated power eliminates a separate isolated DC-DC converter, reducing board space and BOM cost. Design tip: achieve specified CISPR 32 compliance by following the recommended datasheet PCB layout, maintaining adequate clearance/creepage for the reinforced isolation rating, and placing decoupling capacitors close to supply pins.

RFQ پەیوەندی
LM2418T - Triple 30 MHz CRT Driver | National Semiconductor
LM2418T

LM2418T - Triple 30 MHz CRT Driver | National Semiconductor

National Semiconductor LM2418T is a triple large-signal video amplifier designed to drive CRT cathodes in VGA color graphics displays. The device contains three independent 30 MHz video output amplifiers and uses a TO-220-11 through-hole package. According to the National Semiconductor manufacturer datasheet, output swings greater than 50 V peak-to-peak are achieved with a 90 V power supply, making the LM2418T suitable for legacy CRT display output stages requiring substantial cathode drive voltage. A CRT driver is a specialized video amplifier within the interface IC and video IC hierarchy. It sits between a graphics signal source and the electron-gun cathode circuitry of a CRT display. Unlike a general-purpose low-voltage signal amplifier, a CRT driver must combine wide video bandwidth, large output swing, low distortion, and the ability to operate from an elevated supply voltage. The LM2418T implements three such output channels in one integrated package for multi-channel color video systems. The principal documented characteristics are triple-channel operation, 30 MHz bandwidth, greater-than-50 V peak-to-peak output swing, and operation from a 90 V supply. Each section provides its own nominal voltage gain and cathode-drive output. These characteristics allow one component to replace three separate discrete video-output stages when the display design requires red, green, and blue cathode drive. Its integrated three-channel architecture also reduces the number of active driver packages and simplifies channel matching at the system level. Technically, the LM2418 is a large-signal video amplifier rather than a high-speed digital logic device or a low-voltage op amp. Its operating point depends on the elevated B+ supply used in CRT displays. The output swing is therefore tied to the supply voltage, while the 30 MHz bandwidth establishes the usable video-frequency range. Designers must observe the manufacturer’s supply, output, pin, and thermal limits and should not substitute a conventional TO-220-11 power regulator or transistor package without verifying every connection and operating condition. Typical uses include legacy VGA monitor cathode-drive circuits, CRT graphics adapters, CRT-based video test equipment, and repair or modernization projects that retain a 90 V-class display rail. In each case, the LM2418T supplies three amplified video outputs to the display’s cathode network. Its primary advantage is integration: one three-channel device replaces separate red, green, and blue amplifier stages while preserving a 30 MHz bandwidth class. The critical design consideration is the CRT supply and return-current environment. Keep high-voltage and video-return routing compact, maintain the required isolation and clearance margins specified for the display design, and use the manufacturer pin descriptions when assigning PCB connections. Because the package contains exposed supply and ground structures, thermal performance depends on adequate copper area and correct mounting hardware. Confirm the final cathode-drive waveform, output loading, and heat dissipation in the intended display before production. This page consolidates the documented LM2418T identity, operating limits, package information, application context, and engineering considerations into one design-oriented reference. It also distinguishes verified drop-in alternatives from unverified substitutions, helping engineers preserve the TO-220-11 footprint, three-channel architecture, 30 MHz bandwidth, and elevated-supply CRT-drive requirements during legacy design maintenance.

RFQ پەیوەندی
MAX310EPE+ - 8:1 CMOS RF Video Multiplexer | Analog Devices
MAX310EPE+

MAX310EPE+ - 8:1 CMOS RF Video Multiplexer | Analog Devices

Analog Devices MAX310EPE+ is an 8-channel, 8:1 CMOS RF and video multiplexer packaged in a 16-pin PDIP package. The device selects one of eight video inputs and routes it to a common output, providing a practical interface for RF and video routing systems. Its production status, single-channel multiplexing architecture, and through-hole PDIP package make it suitable for established analog and video equipment designs. A video multiplexer is an interface IC that connects multiple signal sources to one destination while allowing a controller to select the active channel. The MAX310 family belongs to the broader switching and multiplexing hierarchy, where analog switches and multiplexers route RF, video, or instrumentation signals without requiring duplicated receiver chains. The MAX310EPE+ uses CMOS circuitry and provides eight selectable inputs rather than acting as a general-purpose logic switch. The main defining characteristics are its 8:1 multiplexing ratio, eight channels, CMOS implementation, and 16-pin PDIP package. The unbuffered architecture listed for this device is suitable for routing applications where impedance matching, gain, and signal-level compatibility are handled by the surrounding circuit. It is particularly relevant to video routing, RF signal selection, test and measurement systems, and legacy video equipment that uses through-hole construction. Because the MAX310EPE+ is designed around an analog switching function, system performance depends on the source impedance, load impedance, signal amplitude, selected channel, and frequency being routed. The device should be evaluated in the complete signal path rather than by switching state alone. PCB routing, grounding, connector geometry, and control-signal timing can materially affect isolation, insertion loss, crosstalk, and signal integrity in high-frequency video systems. Typical uses include video-source selection in test equipment, routing among multiple RF channels in instrumentation, channel selection in professional video equipment, and embedded analog switching systems. For new designs, engineers should confirm the supported signal frequency, on-resistance, bandwidth, off-isolation, and supply requirements against the current manufacturer datasheet before fixing the board architecture. Designers should preserve the manufacturer's recommended supply decoupling and provide a low-impedance ground reference close to the device. Control inputs should be driven cleanly and sequenced so that channel changes do not create transient disturbances on sensitive downstream circuitry. Keep analog routing paths short, isolate switching return currents from precision references, and test all channels across the intended operating range. This page organizes the MAX310EPE+ product identity, package information, sourcing fields, replacement analysis, application guidance, and engineering selection criteria in one concise reference. It also highlights where engineers must validate frequency, voltage, current, and channel performance in the manufacturer datasheet before releasing a production design.

RFQ پەیوەندی
MAX310MJE - 8:1 CMOS RF/Video Multiplexer | Analog Devices
MAX310MJE

MAX310MJE - 8:1 CMOS RF/Video Multiplexer | Analog Devices

Analog Devices MAX310MJE is an 8:1 CMOS RF/video multiplexer in a 16-pin CDIP through-hole package. It supports one multiplexed signal channel, operates as an unbuffered analog switch, and has a maximum on-state resistance of 250 ohms. The device is specified for military-temperature operation and uses a 0.300-inch, 7.62 mm pin pitch. An RF/video multiplexer is an analog switch that connects one common signal path to any one of several signal inputs. It belongs to the analog switch hierarchy, which includes multiplexers and demultiplexers, and ultimately falls under interface ICs and semiconductor signal-routing devices. The MAX310MJE consolidates eight selectable sources onto one output, reducing the number of discrete switches and associated routing logic required in video, test, instrumentation, and communications equipment. Key characteristics include an 8:1 configuration, CMOS construction, 16-CDIP mechanical format, through-hole mounting, and maximum on-state resistance of 250 ohms. Its military temperature grade makes it relevant to ruggedized equipment, although the exact operating-temperature limits should be confirmed against the manufacturer datasheet before a production release. The unbuffered architecture places important emphasis on external source and load impedance, signal amplitude, switching time, and off-state isolation. The MAX310MJE uses independent selection and enable controls to route one of eight channels to the common terminal. Because the switch is unbuffered, it does not provide gain, isolation, impedance buffering, or level translation. Designers should therefore evaluate source impedance, receiver capacitance, settling time, insertion loss, off leakage, and crosstalk together. A practical video path benefits from short traces, a stable ground reference, and termination arranged to minimize reflections. Typical uses include RF and video test systems, instrumentation signal routing, communication equipment, broadcast video interfaces, and defense or aerospace electronics. The part can also support channel-selection architectures where a controller chooses among several inputs and a common amplifier or measurement channel processes the selected signal. Its through-hole CDIP package favors systems that favor through-hole assembly, rugged handling, or prototyping over compact surface-mount layouts. The principal design consideration is signal integrity. Keep input and common-path traces short, use a continuous ground plane, and place the multiplexer near the source of unwanted impedance. Avoid long unterminated traces that can amplify reflections and degrade settling behavior. Review break-before-make requirements in the control timing before switching adjacent channels, especially where the upstream circuit must remain undisturbed during transition. This product overview combines the MAX310MJE configuration, package, resistance, temperature-grade information, and application guidance with pin-compatible alternatives and practical routing considerations. It supports faster sourcing and design decisions while keeping electrical verification anchored in the manufacturer datasheet.

RFQ پەیوەندی
MAX311CPE+ - 8-Channel CMOS RF/Video Multiplexer | Maxim Integrated
MAX311CPE+

MAX311CPE+ - 8-Channel CMOS RF/Video Multiplexer | Maxim Integrated

The Maxim Integrated MAX311CPE+ is an 8-channel CMOS RF/video multiplexer (analog switch IC) supplied in a 16-pin PDIP through-hole package. Maxim's product page lists the MAX311 family in PRODUCTION status, and the '+' ordering code designates the lead-free/RoHS-compliant configuration of the device. Because the MAX311CPE+ is a purely passive CMOS analog multiplexing element, it adds no signal conditioning, no gain and no level shifting - it simply routes one of several RF or video sources to a common output with low insertion loss and minimal crosstalk. An analog multiplexer (also called an analog switch or mux) is a passive semiconductor device that steers a signal path between multiple inputs and a shared output under digital control. Within the signal-chain hierarchy, a multiplexer sits above a basic analog switch and below larger interface and routing ICs, and it belongs to the broader category of interface ICs used to build video routing, matrix and switching systems. Modern video and RF equipment typically replaces the mechanical relay or coax switch of the past with CMOS mux trees like the MAX311 family. Key characteristics of this device include its 8-channel CMOS construction, its operation as a 2:1/4:1-class RF and video routing element, and its ability to handle baseband video and RF signals in the same multiplexed structure. Because the MAX311CPE+ is a through-hole PDIP-16 device, it is easy to prototype on a perfboard or wire into a legacy instrument, and it remains a convenient choice for repair and obsolescence-management work on older professional video and RF test equipment. Architecturally the part uses CMOS transmission-gate switches with break-before-make control logic, so the control inputs can be driven by standard TTL/CMOS logic and the output never connects two sources together during switching. Signal integrity is the key engineering consideration: with on-resistance, off-isolation, bandwidth and crosstalk all specified by Maxim in the manufacturer data sheet, the MAX311CPE+ is best used with source impedances and cable lengths that do not push the switch into its impedance-sensitive region. Typical applications include professional video routing and patch equipment, broadcast and studio monitoring paths, RF instrumentation and test sets, and general-purpose analog signal routing in laboratory or industrial control panels where an 8-way RF/video selector is required. It is also widely used in legacy test and measurement platforms as a service replacement part. When laying out a design around the MAX311CPE+, keep input and output traces short, use a ground plane reference, and place the device close to the signal source to minimise parasitic capacitance on the high-impedance mux node. Confirm the control logic levels and the enable polarity from the manufacturer data sheet before committing to a PCB, because the enable and select decoding arrangement determines how many control lines your host microcontroller must drive.

RFQ پەیوەندی
MAX456EPL+ - 8x8 35MHz Video Crosspoint Switch | Analog Devices
MAX456EPL+

MAX456EPL+ - 8x8 35MHz Video Crosspoint Switch | Analog Devices

The Analog Devices MAX456EPL+ is an 8 x 8 monolithic CMOS video crosspoint switch with a bandwidth of 35 MHz, supplied in a 40-pin PDIP package. The device routes multiple video signals through a programmable crosspoint matrix, allowing eight inputs to be connected to eight outputs through independently controlled switching paths. Its 8 x 8 configuration, 35 MHz video bandwidth, and through-hole PDIP construction make it suitable for professional video routing, broadcast equipment, surveillance systems, and legacy analog video test installations. A video crosspoint switch is an interface IC that provides configurable signal paths between multiple source and destination channels. Within the broader signal-chain hierarchy, the MAX456 belongs to video switches, analog multiplexers, interface ICs, and semiconductors. Unlike a simple mechanical video switch, a crosspoint matrix can route many source signals to selected destinations electronically while reducing the component count, board area, and external interconnection complexity of a conventional relay-based matrix. The MAX456 integrates eight video inputs and eight outputs in one monolithic CMOS device. Its stated 35 MHz bandwidth supports baseband analog video signals, including composite video and other bandwidth-compatible analog sources. Independent matrix control allows operators or system logic to change routing configurations without physically reconnecting cables. The MAX456EPL+ is identified as an industrial-grade 40-pin PDIP version, supporting through-hole PCB assembly and conventional socket-compatible prototyping workflows. Because the MAX456 is an analog video crosspoint rather than a modern digital video processor, its useful design limits are defined by analog bandwidth, channel isolation, gain behavior, crosstalk, power requirements, and output drive. Those detailed electrical characteristics should be checked in the manufacturer datasheet before cascading multiple devices or driving long cable runs. The monolithic architecture can simplify a matrix implementation, but it does not eliminate the need for source termination, grounding, decoupling, and controlled impedance routing. Typical uses include television studio routing, CCTV control-room matrices, lecture-capture video distribution, analog video test equipment, and educational video laboratories. The 40-pin PDIP package is particularly useful where field replacement, socket use, or through-hole assembly has greater value than the smaller footprint of a surface-mount option. A one-channel signal can be routed among outputs by configuring the matrix, while full operation permits many simultaneous connections according to the switching commands supplied by the controlling electronics. The main layout consideration is analog signal integrity. Keep video traces short, maintain a continuous ground reference, decouple supply pins near the device, and avoid routing high-speed digital control or switching-node currents beneath sensitive video paths. Because the MAX456EPL+ is a through-hole device, also plan the connector orientation and analog ground strategy before fabrication. This page consolidates the device identity, package information, design guidance, application fit, and documented same-family alternative for engineers evaluating the legacy 8 x 8 video matrix. For new designs, verify lifecycle availability, electrical limits, and required switching logic before committing the 40-pin PDIP footprint. Request a Quote through the form on this page for current commercial conditions, and consult the manufacturer datasheet for the definitive pin description, timing, power, and analog performance tables.

RFQ پەیوەندی
PCA9511A - Hot-Swappable I2C/SMBus Buffer 400kHz | NXP
PCA9511AD,118

PCA9511A - Hot-Swappable I2C/SMBus Buffer 400kHz | NXP

The NXP PCA9511A is a hot-swappable I2C-bus and SMBus bus buffer that allows I/O card insertion into a live backplane without corrupting the data and clock buses, operating at up to 400 kHz from a 2.3 V to 3.6 V supply in an 8-pin SOIC package. An I2C bus buffer is a type of interface IC that sits between two segments of an I2C or SMBus serial bus, electrically isolating them while repeating logic levels bidirectionally. In the interface IC hierarchy (bus buffer -> I2C repeater/extender -> interface IC -> semiconductor), buffers solve capacitance and contention limits: I2C bus capacitance is limited to roughly 400 pF, and multi-card backplanes quickly exceed this. Buffers partition the bus so each segment sees only its own load, while hot-swap variants additionally prevent corrupt data during card insertion. Key features of the PCA9511A include hot-swap control circuitry that keeps the backplane disconnected until a stop command or bus idle occurs without bus contention on the card side; a rise-time accelerator (accelerator) that actively pulls SDA and SCL edges, allowing stronger pull-up current without violating the standard; and support for the full I2C-bus Standard-mode and Fast-mode rate of 400 kHz. According to the NXP datasheet, the control circuitry prevents connection until the backplane is idle, which is the defining hot-swap behavior of this family. The PCA9511A uses a bidirectional buffer architecture that does not require a direction pin: it senses the direction of data flow dynamically, so no software changes or configuration are needed. The rise-time accelerator sources current into the bus edges only during transitions, reducing RC rise-time constraints of long backplane traces. Typical applications include live-insertion I/O cards in telecom and server backplanes, CompactPCI and ATCA-style shelving systems, SMBus-based rack management, and any system where cards are added or removed while the chassis remains powered. Design considerations: because the buffer is powered from 2.3 V to 3.6 V, level shifting to 5 V buses requires a companion translator such as the PCA9306 or TCA9517; also respect maximum bus capacitance per segment. This page synthesizes distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-10-20.

RFQ پەیوەندی
PI3USB30532 - USB3.0/DP1.2 6:4 Matrix Switch | Diodes Incorporated
PI3USB30532

PI3USB30532 - USB3.0/DP1.2 6:4 Matrix Switch | Diodes Incorporated

The Diodes Incorporated PI3USB30532 is a 3.3V, 6:4 differential channel bi-directional matrix switch that multiplexes one lane of USB 3.2 Gen 1 (USB 3.0, 5 Gb/s), one lane of USB 3.0 plus two channels of DP1.2, or four channels of DP1.2 through a USB Type-C connector, packaged in a 40-pin TQFN (3x6 mm). A crossbar matrix switch is a signal-routing device that connects any of several input differential lanes to any of several output lanes under digital control. Within the signal-integrity product hierarchy (switch IC -> high-speed differential switch -> signal conditioning -> connectivity IC), crossbar switches are essential wherever a single high-speed connector must serve multiple protocols, such as USB Type-C systems that negotiate between USB data and DisplayPort Alt Mode. Key features include true bi-directional signal flow, which eliminates direction-control complexity in reversible Type-C connections, and dedicated multiplexing of the AUX and HPD (AUX-HPD) channels alongside the main differential lanes, so a single IC handles the full Type-C alternate-mode switch function. The device offers excellent signal integrity for high-speed signals and low power dissipation. According to the Diodes Incorporated product brief, insertion loss is -1.2 dB and return loss is -21 dB at the 5 Gb/s data rate of USB 3.0, numbers that indicate the switch consumes only a small fraction of the 7.5 dB channel budget while maintaining good impedance match for eye-diagram compliance at SuperSpeed rates. Typical applications include USB Type-C Alt Mode docking stations, laptops, tablets and 2-in-1 computers, monitor and display input switching, and port replication designs that must arbitrate between USB 3.x and DP1.2 on shared lanes. A key design consideration is supply and control sequencing: the 3.3V supply rail and the SEL/control logic must be established before high-speed signals are present, and the reversible Type-C orientation logic must drive the matrix selection accordingly. This page synthesizes distributor availability, drop-in alternative analysis, pricing context, and practical design notes not found in the manufacturer product brief.

RFQ پەیوەندی