MAX485ECPA+ vs SN75176 بەراوردکردن

بەراوردکردنی وردی لایەن بە لایەن لە MAX485ECPA+ لەلایەن Maxim Integrated و SN75176 لەلایەن Texas Instruments. تایبەتمەندییە سەرەکییەکان، پارامیتەرە کارەباییەکان، پاکێجکردن، دۆخی چرخەی ژیان، نرخ و بەردەستبوون بەراورد بکە بۆ دیاریکردنی باشترین پێکھێنەر بۆ پێداویستییەکانی دیزاینەکەت.

Maxim Integrated
MAX485ECPA+ MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ ✓ چالاک

بەراوردکردنی تایبەتمەندییەکان

پارامەتر MAX485ECPA+ SN75176
براند Maxim Integrated Texas Instruments
پۆل Interface ICs Interface ICs
دۆخی چرخەی ژیان چالاک چالاک
Transceiver Configuration 1 driver / 1 receiver, half-duplex —
Interface Standard RS-485 / RS-422 differential —
ڤۆڵتیەی دابینکردن 5 V nominal (4.5 V to 5.5 V) —
Maximum Data Rate 1 Mbps (slew-rate-limited driver) —
Driver Output Type Differential, limited slew rate —
ESD Protection +/-15 kV on driver outputs and receiver inputs —
پاکێج PDIP-8 (8-pin plastic DIP, through-hole) 8-pin PDIP (P)
جۆری دامەزراندن Through Hole Through-Hole
پلەی گەرمیی کارکردن Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] 0 °C to +70 °C
Quiescent (Supply) Current [DATA_NEEDED: quiescent current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Receiver Input Sensitivity [DATA_NEEDED: receiver differential threshold] —
Driver Output Differential Voltage [DATA_NEEDED: differential output voltage] —
Driver Output Current [DATA_NEEDED: output current (standard / high-impedance load)] ±60 mA (max)
Enable Pins DE (driver enable) and /RE (receiver enable, active-low), separate pins —
Short-Circuit Protection Yes, driver outputs are short-circuit current limited —
کوژاندنەوەی گەرمی Yes, protects against excessive power dissipation —
Quiescent Current Shutdown Pin Not present on this device —
دۆخی RoHS Compliant (Maxim lead-free suffix '+') Compliant
Qualification Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] —
کارکردن — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Receiver Hysteresis — 50 mV (typical)
Supply Voltage (Vcc) — 4.75 V to 5.25 V
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV
Quiescent Supply Current (enabled) — 30 mA (typical)
Shutdown Supply Current — 1 µA (typical)
Standards Compliance — ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27

داتاشیت و سەرچاوەکان

گەڕان بەناو ھەموو بەرھەمەکاندا دروستکردنی BOM داواکردنی نرخ