MAX485ECPA+ vs SN75176 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX485ECPA+ sa pamamagitan ng Maxim Integrated at SN75176 sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ NakahandaTexas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX485ECPA+ | SN75176 |
|---|---|---|
| Brand | Maxim Integrated | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | — |
| Interface Standard | RS-485 / RS-422 differential | — |
| Volte ng Pagbibigay | 5 V nominal (4.5 V to 5.5 V) | — |
| Maximum Data Rate | 1 Mbps (slew-rate-limited driver) | — |
| Driver Output Type | Differential, limited slew rate | — |
| ESD Protection | +/-15 kV on driver outputs and receiver inputs | — |
| Packhaging | PDIP-8 (8-pin plastic DIP, through-hole) | 8-pin PDIP (P) |
| Uri ng Pagpapasok | Through Hole | Through-Hole |
| Temperature na Operasyon | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] | 0 °C to +70 °C |
| Quiescent (Supply) Current | [DATA_NEEDED: quiescent current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver differential threshold] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: differential output voltage] | — |
| Driver Output Current | [DATA_NEEDED: output current (standard / high-impedance load)] | ±60 mA (max) |
| Enable Pins | DE (driver enable) and /RE (receiver enable, active-low), separate pins | — |
| Short-Circuit Protection | Yes, driver outputs are short-circuit current limited | — |
| Thermal Shutdown | Yes, protects against excessive power dissipation | — |
| Quiescent Current Shutdown Pin | Not present on this device | — |
| Tindminan RoHS | Compliant (Maxim lead-free suffix '+') | Compliant |
| Qualification | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] | — |
| Fungsi | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |