Analog Devices

AD524CE - Precision Instrumentation Amplifier | Analog Devices

MPN: AD524CE ✓ چالاک
Ceramic DIP package Package
MOQ: 1 |

AD524CE گشتی

The Analog Devices AD524CE is a precision monolithic instrumentation amplifier intended for high-accuracy data-acquisition signal chains. The AD524 family provides rail-to-rail operation, low offset voltage, low offset-voltage drift, and low noise for precision high-gain measurements. The family supports a wide supply range and gains up to 1000, reaching a 25 MHz gain-bandwidth product at a gain of 1000. AD524CE is supplied in a ceramic DIP package with an extended-temperature identification code.

An instrumentation amplifier is a differential-input amplifier designed to amplify the voltage difference between two inputs while rejecting common-mode signals. It belongs to the operational-amplifier hierarchy and is commonly used where sensors produce small differential signals superimposed on larger common-mode voltages. In a typical signal chain, a sensor connects to the amplifier inputs, the instrumentation amplifier provides selectable gain, and the output is routed to an ADC or data-conversion system.

The AD524 family is characterized by precision DC specifications and low noise. Its rail-to-rail behavior supports operation across the available supply range, while the wide supply range provides flexibility across industrial, instrumentation, and test systems. Gains of 1 through 100 are supported by the AD524 family, with a 25 MHz gain-bandwidth product specified at a gain of 1000. Output slew rate is 5 V/µs, and settling to 0.01% takes 15 µs for gains from 1 through 100.

The AD524 uses a precision monolithic implementation to provide accurate gain and low offset behavior. Its low offset voltage and low offset-voltage drift reduce measurement errors that could otherwise change with temperature or operating conditions. The combination of rail-to-rail operation, low noise, and stable DC characteristics makes the family appropriate for bridge sensors, strain gauges, pressure transducers, and other precision measurement circuits.

Typical applications include industrial process measurement, laboratory data acquisition, sensor-interface boards, medical instrumentation, and test equipment. In a bridge or strain-gauge circuit, the differential output from the sensor is amplified while common-mode excitation and ground-potential differences are rejected. The AD524 can also precede an ADC when a small sensor signal requires additional gain and analog signal conditioning.

Designers should verify the exact AD524CE pinout, supply limits, gain configuration, input common-mode range, and recommended external components against the Analog Devices AD524 datasheet before layout. Input and reference networks should use tight-tolerance resistors when gain accuracy is important, and the circuit should minimize board leakage and thermal gradients across sensitive inputs.

This page combines family-level performance, package information, sourcing guidance, comparison criteria, and practical application notes. It also distinguishes verified drop-in options from family members that use different packages, helping engineers make a replacement decision based on actual board compatibility rather than function alone.

جێگرەوەکانی جێگۆڕکێ بۆ AD524CE — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

AD524CE زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Precision monolithic instrumentation amplifier
Amplifier Configuration 1-amplifier differential-input instrumentation amplifier
Maximum Gain 1000 V/V
Gain Bandwidth Product 25 MHz at G = 1000
Output Slew Rate 5 V/µs
Settling Time 15 µs to 0.01% for gains of 1 to 100
Rail-to-Rail Operation Rail-to-rail
Gain Range 1 to 100 for the specified settling performance
Extended Temperature Range -55 °C to +125 °C for the S-grade AD524 family
پاکێج Ceramic DIP package
جۆری دامەزراندن Through-hole

ڕێنمایی ڕێکخستنی پینی AD524CE ceramic dip package

ڕێکخستنی پین بۆ AD524CE (پاکێجی ceramic dip package). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی ceramic dip package بۆ AD524CE

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD524CE.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD524CE گونجاوە بۆ 6 بەکارھێنانs: Strain-Gauge Bridge Measurement, Pressure and Transducer Interface, Laboratory Data Acquisition, Industrial Process Control, Medical Instrument Signal Conditioning, Precision Test and Measurement.

🏭

Strain-Gauge Bridge Measurement

The AD524CE is well suited to conditioning a strain-gauge bridge because instrumentation amplifiers amplify the small differential bridge voltage while rejecting common-mode excitation. The AD524 family’s low offset voltage, low offset-voltage drift, and low noise help preserve measurement integrity as mechanical stress changes the bridge output. Its gains extend to 1000, with a 25 MHz gain-bandwidth product specified at G = 1000, while the 5 V/µs slew rate supports practical signal transitions. Use the manufacturer’s recommended gain resistor network and verify the exact AD524CE input common-mode limits before connecting the bridge.

🧩

Pressure and Transducer Interface

The AD524CE can serve as the analog front end for a bridge-based pressure or displacement transducer, converting a small millivolt-level differential output into a signal suitable for an ADC. The AD524 family’s precision DC characteristics reduce offset and drift, while low noise benefits measurements in which the transducer output changes slowly or has limited dynamic range. Rail-to-rail operation provides flexibility across the supply range, and the family settles to 0.01% in 15 µs for gains from 1 through 100. Input protection and filtering should be selected without loading the sensor or degrading the specified common-mode performance.

🖥️

Laboratory Data Acquisition

The AD524CE is appropriate for laboratory instruments that measure low-level differential signals and require low offset, low drift, and low noise. Its adjustable gain supports scaling from millivolt sensor outputs to an ADC input range, and the 5 V/µs output slew rate helps the amplifier recover rapidly after an input or gain transition. The 15 µs settling specification to 0.01% for gains of 1 through 100 is particularly relevant when successive measurements use different gains. Keep sensitive input traces short, use a grounded guard structure where appropriate, and account for ADC acquisition and conversion time in the measurement sequence.

🏭

Industrial Process Control

The AD524CE can amplify differential signals from industrial sensors when low noise and stable offset are important for process control. Rail-to-rail operation and a broad AD524 family supply range make the device adaptable to multiple signal-chain voltages, while low offset drift improves consistency as the equipment environment changes. The 15 µs settling behavior for gains from 1 through 100 supports responsive closed-loop measurements. For factory equipment, add surge and transient protection ahead of the amplifier, maintain a clear separation between sensitive input and high-current return paths, and verify the AD524CE temperature grade against the enclosure conditions.

💊

Medical Instrument Signal Conditioning

The AD524CE’s low offset, low drift, and low noise can support precision differential-signal conditioning in medical and diagnostic instruments. Instrumentation-amplifier topology is useful for patient-monitoring or biosensor front ends because it gains the wanted differential signal and rejects common-mode voltage. The AD524 family supports gains to 1000 and provides a 5 V/µs slew rate for handling signal transitions, while low-noise operation helps preserve small physiological signals. The medical system designer must still determine the exact AD524CE supply limits, input bias behavior, leakage requirements, isolation strategy, and applicable medical qualification needs.

⚡

Precision Test and Measurement

The AD524CE is suitable for bench instrumentation that measures small differential voltages with high accuracy. Its precision monolithic architecture, low offset voltage, and low offset-voltage drift reduce errors in gain-of-100 measurements, and the family’s rail-to-rail behavior allows operation near the available supply limits. The 25 MHz gain-bandwidth product at G = 1000 provides ample bandwidth for higher-frequency diagnostic signals, while the 5 V/µs slew rate limits large-signal distortion. For accurate results, use stable gain and reference resistors, separate the analog ground path from digital return currents, and include shielding or guarding when long input cables raise noise and leakage concerns.

کورتەی بەرهەمە پێشنیارکراوەکان

AD524AD AD524 family member in a ceramic DIP package بەکارهێنراوە لە: Strain-Gauge Bridge Measurement, Pressure and Transducer Interface, Laboratory Data Acquisition, Industrial Process Control, Medical Instrument Signal Conditioning AD524SD AD524 family member with a ceramic-DIP-style package option بەکارهێنراوە لە: Strain-Gauge Bridge Measurement, Industrial Process Control, Precision Test and Measurement AD524S AD524 family precision amplifier option بەکارهێنراوە لە: Pressure and Transducer Interface, Laboratory Data Acquisition, Medical Instrument Signal Conditioning, Precision Test and Measurement
What is the AD524CE instrumentation amplifier used for?
The AD524CE is used to amplify small differential sensor signals while rejecting common-mode voltage in precision measurement systems. Analog Devices describes the AD524 as a monolithic instrumentation amplifier for data-acquisition applications requiring high accuracy under worst-case operating conditions. Its precision DC characteristics, low noise, low offset voltage, and low offset-voltage drift make it suitable for bridge sensors, strain gauges, pressure transducers, and laboratory instrumentation.
What are the key specifications of AD524CE that engineers should know?
The AD524CE belongs to the AD524 precision instrumentation-amplifier family, which supports rail-to-rail operation and gains up to 1000. Analog Devices specifies a 25 MHz gain-bandwidth product at a gain of 1000, a 5 V/µs output slew rate, and 15 µs settling to 0.01% for gains of 1 through 100. The exact supply limits, offset, noise, and common-mode specifications for the AD524CE ordering code should be confirmed in the manufacturer datasheet.
Where can I download the AD524CE datasheet PDF?
The official AD524CE family documentation is available through the Analog Devices AD524 product page at https://www.analog.com/en/products/ad524.html. The manufacturer page provides the data sheet and describes the available ceramic DIP, SBDIP, wide SOIC, and leadless-chip-carrier options. Use the ordering-information table to associate AD524CE with its exact package, temperature grade, and electrical limits before committing the part to a design.
Where can I find the AD524CE pinout?
The AD524CE pin assignment is defined in the Analog Devices AD524 datasheet rather than on the distributor product page. Open the pin-description and ordering-information sections and select the ceramic DIP ordering option corresponding to AD524CE. Because exact terminal names and numbering for this ordering code are not reproduced on this page, use the manufacturer diagram directly when assigning PCB tracks, connector pins, supply connections, and gain-setting resistors.
What is the gain-bandwidth product of AD524CE?
The AD524 family reaches a 25 MHz gain-bandwidth product at a gain of 1000, according to the Analog Devices product information. This specification shows that the family can provide substantial bandwidth even in a high-gain instrumentation-amplifier configuration. Actual usable signal bandwidth also depends on the selected gain, source impedance, settling requirements, printed-circuit-board layout, and the exact AD524CE operating conditions.
How fast does the AD524 family settle?
The AD524 family settles to within 0.01% in 15 µs for gains from 1 through 100, according to Analog Devices. The family also provides an output slew rate of 5 V/µs. These figures make it useful for data-acquisition systems that must recover quickly after gain or input changes, although complete acquisition timing must also include the settling behavior of the downstream ADC and any required anti-alias filtering.
Is AD524CE suitable for low-noise precision measurement?
Yes, the AD524 family is specifically characterized for precision, high-gain applications with low offset voltage, low offset-voltage drift, and low noise. Those properties reduce error in strain-gauge, bridge, pressure-sensor, and laboratory signal-conditioning circuits. The final noise performance depends on the exact AD524CE gain, bandwidth setting, source resistance, reference network, supply arrangement, and the noise contribution of the following ADC or measurement instrument.
AD524CE vs AD524BE - can AD524BE replace AD524CE?
AD524BE cannot be treated as a verified drop-in replacement for AD524CE from the available package information. The comparison identifies AD524BE in a 20-terminal leadless chip carrier, while AD524CE is associated with the ceramic DIP option. A leadless-chip-carrier part requires a different PCB footprint and is therefore not pin-to-pin compatible with a ceramic DIP installation. Confirm the exact mechanical drawing and terminal assignment before considering any redesign.
When should I choose AD524CE instead of another AD524 package option?
Choose AD524CE when the design specifically requires its ceramic DIP mechanical format and corresponding electrical grade. A leadless chip carrier may suit automated assembly, while a wide SOIC can simplify surface-mount PCB assembly. The selection should follow package availability, soldering and assembly method, thermal requirements, required temperature grade, and verified ordering-code specifications rather than function alone, because the AD524 family can include mechanically different package options.
Is AD524CE suitable for industrial sensor acquisition?
Yes, AD524CE is suitable for precision sensor-acquisition applications when its exact supply, temperature, input-range, and common-mode limits match the system. The family’s rail-to-rail behavior, low offset, low drift, and low noise support bridge and transducer measurements where the useful differential signal is small relative to the excitation voltage. Industrial designs should also evaluate transient protection, grounding, connector isolation, and sensor excitation requirements.
Where can I buy AD524CE online?
Use the Request a Quote form on this page to request AD524CE availability, current unit pricing, minimum order quantity, and lead time. The form provides a direct purchasing channel for the exact AD524CE ordering code and avoids confusion with other AD524 package variants. Because this page uses quote-based commercial handling, current stock and delivery schedules should be confirmed through the quote response.
What is the current price of AD524CE?
Current AD524CE pricing is available through the Request a Quote form on this page. The form supports an inquiry for the exact ceramic-DIP ordering code and can return the applicable unit price, quantity breaks, and availability for the requested configuration. Quote results may depend on order quantity, shipment destination, and current component supply, so submit the intended quantity and target date with the request.
What is the lead time for AD524CE?
The current AD524CE lead time should be requested through the Request a Quote form on this page. Include the required quantity, annual usage estimate, target shipment date, and destination country so the supplier can confirm the most appropriate supply plan. The AD524 family’s different package and temperature codes should not be assumed to share identical inventory or lead times.
Is AD524CE in stock?
AD524CE stock status is determined against the exact ordering code and requested quantity through the Request a Quote form on this page. A general family or package indication does not establish availability for AD524CE. Submit the required quantity and shipment destination to obtain a current availability confirmation and delivery estimate.
What can replace AD524CE without changing the PCB?
No verified pin-compatible replacement for AD524CE is established by the available manufacturer and cross-reference information. AD524BE is a functional member of the same family, but its 20-terminal leadless-chip-carrier package does not match the ceramic-DIP footprint and therefore is not a drop-in replacement. A no-PCB-change replacement should be accepted only after its package drawing, terminal names, supply limits, gain settings, and electrical performance are verified as equivalent.
What is the best cross-brand equivalent for AD524CE?
No cross-brand drop-in equivalent for AD524CE can be confirmed from the available cross-reference information. A cross-brand instrumentation amplifier would need to match the ceramic-DIP footprint, pin assignment, gain network, supply range, input common-mode range, offset, noise, settling behavior, and temperature grade before it could replace AD524CE safely. Without those exact comparisons, treat a cross-brand device as a redesign candidate rather than a guaranteed drop-in part.

داتای سەرچاوەی ئەندازیاری بۆ AD524CE — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose AD524CE when the design requires the exact ceramic-DIP ordering option and the AD524 family’s precision instrumentation-amplifier performance. It is appropriate for low-level differential sensor signals requiring low offset, low drift, low noise, rail-to-rail behavior, and gains as high as 1000. AD524BE may serve as a functional family alternative when its leadless-chip-carrier footprint is acceptable, but it is not a no-change PCB replacement. Other AD524 package options should be considered when automated surface-mount assembly, board area, connectorization, or assembly method is more important than preserving the ceramic-DIP footprint. Before final selection, verify the exact supply limits, input common-mode range, gain-setting network, package drawing, temperature grade, and lifecycle status for the proposed ordering code.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Brand Analog Devices
Package Ceramic DIP package
Product Type Precision monolithic instrumentation amplifier
Maximum Gain 1000 V/V
Gain-Bandwidth Product 25 MHz at G = 1000
Output Slew Rate 5 V/µs
Settling Time 15 µs to 0.01% for gains of 1 to 100
Rail-to-Rail Operation Rail-to-rail
Extended Temperature Range -55 °C to +125 °C for the S-grade AD524 family

جیاکەرەوە سەرەکییەکان

  • Precision DC performance in a compact monolithic instrument-amplifier family (بەراورد بەAD524BE)
  • High-gain operation with substantial bandwidth (بەراورد بەAD524BE)
  • Rapid recovery between measurements (بەراورد بەAD524BE)

تێبینییەکانی دیزاین

Route the differential inputs as a closely coupled pair and keep them away from switching nodes, relay contacts, and high-current return paths. Connect the gain-setting and reference resistors close to the corresponding device pins, and place any input filtering capacitors where their impedance remains acceptable across the intended measurement bandwidth. Use the Analog Devices AD524 datasheet pin and layout examples when defining the ceramic-DIP footprint.

Instrumentation-amplifier common-mode rejection depends on resistor matching and symmetry, so use a common resistor network and avoid asymmetric copper or connector geometry between the inputs. For low-frequency precision measurements, add guarding around input and reference nodes and maintain a clean analog return. For higher-bandwidth measurements, include capacitance from each input to its corresponding reference according to the manufacturer’s recommended circuit.

Do not select AD524 variants solely by function or the AD524 family name; package code, temperature grade, and electrical limits differ among ordering options. In particular, the identified AD524BE alternative uses a 20-terminal leadless chip carrier and is not a ceramic-DIP drop-in replacement. Before assembly, compare the exact AD524CE pinout, mechanical drawing, supply rating, gain configuration, and footprint against the production schematic and PCB.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Exact AD524CE environmental and material-compliance declarations were not identified. AEC-Q100 is not applicable to this general-purpose instrumentation amplifier.

داتا پشتڕاستکراوەتەوە لە: 2026-11-18 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ad524 datasheet AD524CE datasheet AD524CE datasheet pdf AD524CE pinout AD524CE ceramic DIP AD524CE instrumentation amplifier AD524CE precision amplifier AD524CE replacement AD524CE cross reference AD524CE vs AD524BE AD524CE price AD524CE stock AD524CE strain gauge AD524CE data acquisition

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD524CE AD524 AD524BE AD524AD AD524SD AD524S instrumentation amplifier monolithic instrumentation amplifier operational amplifier differential input amplifier precision amplifier signal conditioning data acquisition strain gauge bridge sensor pressure transducer gain-bandwidth product output slew rate settling time rail-to-rail operation ceramic DIP package leadless chip carrier Analog Devices AD524 datasheet
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ