Analog Devices

AD539JNZ - Dual 60MHz Analog Multiplier | Analog Devices

MPN: AD539JNZ ✗ کۆتایی ژیان
16-pin PDIP Package Video frequency Speed
MOQ: 1 |

AD539JNZ گشتی

Analog Devices AD539JNZ is a wideband, dual-channel, two-quadrant analog multiplier/divider with two identical Y signal channels, a common X control input, and a bandwidth exceeding 60 MHz. The device is packaged in a 16-pin PDIP and is intended for high-speed analog computation, gain control, modulation, and signal-processing systems.

An analog multiplier is a signal-processing semiconductor that multiplies two analog voltages and produces an output proportional to their product. The AD539 belongs to the wider multiplier/divider category within analog ICs, where it provides a controlled computational function that would otherwise require several amplifiers, resistors, and precision networks. Its two matched Y channels allow one common X signal to control two analog operations simultaneously.

The AD539 family emphasizes wideband ac performance, low distortion, and useful static accuracy for computational circuits. According to the Analog Devices AD539 data sheet, Revision B, the common X input provides linear control of gain, while the two identical signal channels are labeled Y1 and Y2. Its stated -3 dB bandwidth is greater than 60 MHz, making it applicable to video-frequency signal chains rather than only precision low-frequency measurement systems.

The architecture supports two-quadrant operation, meaning either polarity of the control input can be used while one signal input defines the output magnitude. This makes the AD539 useful for amplitude modulation, multiplication-based automatic gain control, analog signal inversion, waveform generation, and real-time analog product computation. Its bandwidth permits the multiplier to process signals well beyond audio frequencies.

Typical applications include broadband gain control in communication receivers, modulation and demodulation circuits, precision signal conditioning, laboratory analog computers, video signal processing, and closed-loop control systems. For bidirectional or full-wave applications, additional circuitry is required because the AD539 provides two-quadrant rather than four-quadrant multiplication.

Layout and signal integrity are critical because high-speed analog multiplication requires short, symmetric paths and careful grounding. Keep X1, X2, Y1, and Y2 connections compact, use a solid ground plane, and place input and output compensation or termination networks where recommended by the manufacturer application guidance. Because the AD539 is not recommended for new designs, engineers should evaluate its technical suitability carefully when supporting legacy equipment.

This page combines the manufacturer product information with practical application guidance, pin-package details, drop-in family options, and engineering trade-offs. It is intended to help buyers identify the correct legacy device, verify PCB compatibility, and determine whether the AD539JNZ is suitable for a maintenance, retrofit, or specialized analog-computation design.

جێگرەوەکانی جێگۆڕکێ بۆ AD539JNZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

AD539JN

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 16-PDIP
Dual-channel analog multiplier/divider · 2 channels · 2-quadrant operation · Greater than 60 MHz · 60 MHz wideband · 1 common X input · 2 signal channels, Y1 and Y2 · Band-gap voltage reference

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AD539JD

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 16-PDIP
Dual-channel linear multiplier/divider · 2 channels · 2-quadrant · Wideband · Analog Devices · 16-CDIP · 16 leads · Through-hole

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AD539SD/883B

✅ جێگرەوەی ڕاستەوخۆ
📦 16-PDIP
Same AD539 dual-channel multiplier family and over-60 MHz bandwidth; military ordering and qualification class differ while stated bandwidth difference is 0 MHz.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD539SH/883B

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-PDIP
Same AD539 multiplier architecture and over-60 MHz bandwidth with 0 MHz stated bandwidth difference; hermetic and military qualification differ.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD539JR

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-PDIP
Same dual-channel, two-quadrant AD539 function and over-60 MHz bandwidth; ceramic or environmental ordering class differs while stated bandwidth difference is 0 MHz.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD539JNZ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Dual-channel analog multiplier/divider
Signal Channels 2 identical channels: Y1 and Y2
Control Inputs Common X input
Multiplication Capability 2-quadrant
-3 dB Bandwidth Over 60 MHz
Frequency Class Video frequency
Distortion Low distortion
Static Accuracy Good static accuracy for computational circuits
پاکێج 16-pin PDIP
جۆری دامەزراندن Through-hole
Lifecycle Recommendation Not recommended for new designs
Data Sheet Revision Revision B

ڕێنمایی ڕێکخستنی پینی AD539JNZ 16-pin pdip

ڕێکخستنی پین بۆ AD539JNZ (پاکێجی 16-pin pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 16-pin pdip بۆ AD539JNZ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD539JNZ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD539JNZ گونجاوە بۆ 6 بەکارھێنانs: Broadband Gain-Control Circuits, Amplitude Modulation and Demodulation, Analog Computation and Control, Video Signal Processing, Laboratory Analog Computers, Legacy Industrial Equipment Repair.

📡

Broadband Gain-Control Circuits

The AD539JNZ fits analog gain-control loops because its common X input linearly controls the gain of two identical Y channels. With bandwidth exceeding 60 MHz, it can respond to rapidly changing control signals rather than being limited to slow audio-level adjustments. A typical implementation applies an input waveform to Y1 and a control voltage to X, producing an amplitude-controlled output. Using Y1 and Y2 in parallel also allows control of two related channels. The main design consideration is loop stability and control-path layout, because parasitic capacitance and mismatched routing can distort the intended product relationship at high frequency.

🌐

Amplitude Modulation and Demodulation

The AD539JNZ is suitable for amplitude-modulation and demodulation stages because it performs a direct analog product of the X and Y inputs. Its bandwidth above 60 MHz supports modulation signals in the video-frequency region, while two-quadrant operation permits either polarity of the control signal. In a transmitter, the carrier enters a Y channel and the modulation waveform drives X; in a receiver, the incoming signal and local reference can be multiplied to recover the baseband component. The benefit is a dedicated multiplier function with low distortion, although filtering and level calibration remain necessary to suppress unwanted products and maintain modulation accuracy.

🏭

Analog Computation and Control

The AD539JNZ can implement analog product terms in control, simulation, and computational circuits because each Y channel is driven by the same X control input. Its over-60 MHz -3 dB bandwidth allows the multiplication function to operate at video frequencies, extending beyond conventional slow analog-computer multipliers. The dual-channel organization is useful when a control system needs two related products, such as a forward term and an error term. Designers should include balancing and compensation networks to account for offset and distortion, and should verify loop gain and phase margin with the complete external circuitry rather than relying on multiplier bandwidth alone.

📺

Video Signal Processing

The AD539JNZ is appropriate for selected video-frequency processing tasks because Analog Devices specifies a -3 dB bandwidth of over 60 MHz and low distortion. It can implement channel amplitude control, multiplication-based mixing, waveform shaping, and signal-isolation functions that would otherwise require multiple precision stages. The two identical Y channels allow paired operations under a common X control, which can simplify balanced or complementary processing. In practice, maintain short signal paths, provide a continuous ground reference, and observe the manufacturer's recommended compensation and termination arrangements to limit gain errors and unintended high-frequency behavior.

🧪

Laboratory Analog Computers

The AD539JNZ supports laboratory analog-computer and simulator designs where real-time multiplication is required. Its common X input and two identical Y channels enable two products to be formed under one control variable, while bandwidth above 60 MHz permits experiments involving video-frequency signals. The dedicated multiplier architecture can simplify a simulator compared with cascaded amplifier and precision-resistor networks, but component matching and temperature drift still influence overall computation accuracy. Use the manufacturer data sheet for offset and gain-adjustment procedures, and keep sensitive input nodes away from noisy return paths to preserve low-distortion operation.

🔧

Legacy Industrial Equipment Repair

The AD539JNZ is especially relevant to maintenance of legacy industrial and instrumentation systems that use the AD539 family in a 16-pin PDIP footprint. Its two-quadrant multiplication, dual-channel structure, and over-60 MHz bandwidth preserve the original analog behavior while supporting a like-for-like procurement strategy. Because the manufacturer marks the AD539 family as not recommended for new designs, engineers should first confirm that the device remains the correct functional and environmental choice for the repaired equipment. For long-life systems, request current stock and longevity information and consider the appropriate military or ceramic family option where operating conditions require it.

کورتەی بەرهەمە پێشنیارکراوەکان

AD539JN AD539-family gain-control alternative بەکارهێنراوە لە: Broadband Gain-Control Circuits, Analog Computation and Control, Video Signal Processing, Legacy Industrial Equipment Repair AD539JD Pin-compatible AD539-family option بەکارهێنراوە لە: Broadband Gain-Control Circuits, Amplitude Modulation and Demodulation, Video Signal Processing, Legacy Industrial Equipment Repair AD539SD/883B Qualified family option for demanding systems بەکارهێنراوە لە: Amplitude Modulation and Demodulation, Laboratory Analog Computers AD539JR Alternative family ordering option بەکارهێنراوە لە: Analog Computation and Control AD539SH/883B Hermetic family option بەکارهێنراوە لە: Laboratory Analog Computers, Legacy Industrial Equipment Repair
Where can I download the AD539JNZ datasheet PDF?
The AD539JNZ datasheet and product resources are available from the Analog Devices AD539 product page at https://www.analog.com/en/products/ad539.html. According to Analog Devices, the linked data sheet is Revision B and describes the AD539 as a wideband dual-channel linear multiplier/divider. Use the manufacturer document to verify the complete electrical characteristics, pin description, package drawing, and application circuit before beginning a PCB or replacement design.
What is the AD539JNZ?
The AD539JNZ is a dual-channel, two-quadrant analog multiplier/divider with a common X control input and two identical Y signal channels. According to the Analog Devices AD539 data sheet, Revision B, it combines a -3 dB bandwidth of over 60 MHz with low distortion and good static accuracy. The device is supplied in a 16-pin PDIP and is primarily useful for wideband analog multiplication, modulation, gain control, and computation.
What are the key specifications of AD539JNZ that engineers should know?
The AD539JNZ provides two identical analog signal channels, one common X control input, two-quadrant multiplication, and a bandwidth exceeding 60 MHz. According to the Analog Devices AD539 data sheet, Revision B, its strengths are low distortion, video-frequency ac performance, and good static accuracy for computational applications. The 16-pin PDIP through-hole package also makes it directly relevant to older and legacy analog-circuit boards requiring maintenance or a like-for-like replacement.
Is the AD539JNZ suitable for video-frequency signal processing?
Yes, the AD539JNZ is suitable for video-frequency signal processing because Analog Devices specifies a -3 dB bandwidth of over 60 MHz. The dual Y1 and Y2 channels share a common X control input, allowing two related analog products to be generated in parallel. The combination of wide bandwidth and low distortion supports modulation, demodulation, gain-control, and computational functions operating well above audio frequency.
What does two-quadrant operation mean for the AD539JNZ?
Two-quadrant operation means the AD539JNZ can multiply an X control signal by a Y signal while accommodating either polarity of X. According to the Analog Devices AD539 data sheet, Revision B, the common X input provides linear control of gain. Full four-quadrant multiplication, including arbitrary combinations of both X and Y input polarities, is not inherent and requires additional circuitry when needed.
AD539JNZ vs AD539JD - which is better for a legacy replacement?
The AD539JNZ and AD539JD are compatible AD539-family devices for applications requiring the same 16-pin DIP footprint and multiplier function. A published cross-reference comparison describes the AD539JD as completely replaceable for the AD539JNZ, with consistent terminals, packages, and principal performance characteristics. Final selection should still account for the manufacturer-specified temperature grade, qualification class, and availability for the operating environment.
When should I choose AD539JNZ over another AD539-family device?
Choose the AD539JNZ when maintaining a 16-pin PDIP board that requires the AD539 family's two-channel, two-quadrant multiplier function and greater than 60 MHz bandwidth. A different AD539 option may be preferable when temperature range, environmental qualification, ceramic versus plastic construction, or sourcing conditions differ. Because the manufacturer marks the family as not recommended for new designs, it is best suited to legacy maintenance and specialized retrofits.
Is AD539JNZ suitable for a new analog signal-chain design?
The AD539JNZ is technically suitable for a suitable legacy or specialized analog system, but Analog Devices states that the AD539 is not recommended for new designs. The device still offers two identical channels, a common X control input, two-quadrant operation, and bandwidth above 60 MHz. For a new high-volume platform, evaluate current analog multiplier products as well so that lifecycle, qualification, and long-term sourcing risks are considered.
What can replace the AD539JNZ?
The closest drop-in family replacements include AD539JN, AD539JD, AD539SD/883B, AD539SH/883B, and AD539JR where their package and environmental ordering codes are compatible with the original board. All are AD539-family two-quadrant multiplier devices with the same over-60 MHz bandwidth class. Confirm the exact temperature range, package construction, lead arrangement, and operating qualification before approving any substitution.
Can AD539JD replace AD539JNZ without changing the PCB?
Yes, AD539JD can replace AD539JNZ without a PCB change when the required ordering option, temperature grade, and qualification level are acceptable. The published comparison identifies the AD539JD as completely replaceable, with consistent terminals, packages, and principal performance characteristics. Both belong to the AD539 family, whose two-quadrant multiplier architecture operates above 60 MHz; nevertheless, verify the specific ordering code before production use.
Where can I buy AD539JNZ and request current pricing?
Use the Request a Quote form on this XAIPART page to request current AD539JNZ pricing, stock confirmation, minimum order quantity, and lead time. The manufacturer identifies the AD539 family as not recommended for new designs, so current channel availability can change and should be confirmed before committing a production schedule. The request can also specify the required 16-pin PDIP construction and quantity.
What is the lead time for AD539JNZ?
The current AD539JNZ lead time must be confirmed through the Request a Quote form on this XAIPART page. Because Analog Devices marks the AD539 family as not recommended for new designs, production status and available inventory can vary by ordering code and quantity. When requesting a quotation, identify the AD539JNZ marking, target quantity, delivery location, and required date to obtain an actionable schedule.
Is AD539JNZ in stock?
Use the Request a Quote form on this XAIPART page for a current stock check for AD539JNZ rather than relying on an unconfirmed historical listing. Stock should be evaluated against the exact 16-pin PDIP ordering code and required quantity. Analog Devices' not-recommended-for-new-designs status makes periodic availability confirmation particularly important for maintenance, repair, and long-lived industrial systems.
Where can I find the AD539JNZ pinout?
The AD539JNZ pin configuration and package drawing are in the Analog Devices AD539 manufacturer data sheet, Revision B, accessible from https://www.analog.com/en/products/ad539.html. The device uses a 16-pin PDIP package with X, Y1, Y2, output, supply, and ground connections identified in the document's pin-description table. Use that table for PCB traces and the package drawing for mechanical clearance rather than inferring connections from a distributor image.
What compliance and qualification information applies to AD539JNZ?
The AD539JNZ compliance status cannot be assumed from the distributor summaries and should be checked against the current Analog Devices product documentation and the exact ordering code. The AD539 family is marked not recommended for new designs, while environmental qualification can differ among AD539JNZ and military or ceramic ordering options. Request the current manufacturer declaration, material-compliance information, and qualification records before using the device in a regulated or safety-relevant design.

داتای سەرچاوەی ئەندازیاری بۆ AD539JNZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the AD539JNZ for maintenance or specialized designs that specifically require an AD539-family, two-channel, two-quadrant multiplier in a 16-pin PDIP package with bandwidth above 60 MHz. Select AD539JN when its ordering grade better matches the original equipment. Choose AD539JD when a package-compatible ceramic or temperature-oriented family option is appropriate; the published comparison reports consistent terminals and principal performance. Use AD539SD/883B or AD539SH/883B for legacy systems requiring military qualification, and consider AD539JR when its environmental ordering class fits the installation. None of these options changes the fundamental dual-Y, common-X multiplier architecture, so the decisive checks are package construction, temperature range, qualification, sourcing life, and required accuracy. Because the family is not recommended for new designs, use it primarily where redesign would be disruptive or where no newer implementation has been qualified.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AD539JN AD539JD AD539SD/883B AD539SH/883B AD539JR
Package 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Dual-channel analog multiplier/divider AD539-family analog multiplier/divider AD539-family analog multiplier/divider AD539-family analog multiplier/divider AD539-family analog multiplier/divider AD539-family analog multiplier/divider
Signal Channels 2 identical channels: Y1 and Y2 2 channels 2 channels 2 channels 2 channels 2 channels
Multiplication Capability 2-quadrant 2-quadrant 2-quadrant 2-quadrant 2-quadrant 2-quadrant
-3 dB Bandwidth Over 60 MHz Over 60 MHz Over 60 MHz Over 60 MHz Over 60 MHz Over 60 MHz
Control Input Common X input Common X input Common X input Common X input Common X input Common X input

جیاکەرەوە سەرەکییەکان

  • Provides two identical channels under one common control input (بەراورد بەAD539JN)
  • Retains over-60 MHz multiplier bandwidth in a 16-pin PDIP footprint (بەراورد بەAD539JD)
  • Supports qualified family options for demanding legacy environments (بەراورد بەAD539SD/883B)

تێبینییەکانی دیزاین

Keep the X1, X2, Y1, and Y2 paths short and place the associated input and output networks close to the device. Maintain a low-impedance ground plane and avoid routing sensitive multiplier inputs beneath digital or switching-converter sections. The device's bandwidth exceeds 60 MHz, so trace geometry, grounding, and parasitic capacitance can affect behavior even though the functional operation is analog. Use the manufacturer pin-description table and application circuitry to preserve the intended topology.

Treat the common X input as the control path and preserve symmetry between the two Y channels. Small differences in input impedance, trace length, or grounding can create imbalance between Y1 and Y2, particularly near the upper portion of the over-60 MHz bandwidth. For signal-processing systems, calibrate gain and offset after installation and use short ground returns. Verify the complete circuit with a sweep because bandwidth alone does not guarantee acceptable phase margin or channel matching.

Do not assume that any AD539-family ordering option is automatically equivalent to AD539JNZ. Check the package construction, temperature range, qualification class, pin description, and lead arrangement before substitution. Two-quadrant operation also requires careful interpretation: the common X input controls gain with either polarity, but full four-quadrant multiplication requires additional circuitry. For legacy systems, confirm that the device's NRND status is acceptable before releasing a long-lived production order.

Use a continuous, low-impedance ground reference and place bypass capacitors where the manufacturer application circuit recommends them. Because the AD539 can process video-frequency signals, long input loops can behave as antennas and couple external interference into the multiplication result. Keep high-current switching loops and converter inductors physically separated from the X and Y inputs, and avoid large copper areas on sensitive input nodes that could increase unwanted capacitance.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The manufacturer marks the AD539 family as not recommended for new designs. Exact environmental compliance and material declarations must be checked against the current AD539JNZ ordering-code documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-18 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

AD539JNZ datasheet AD539JNZ pinout AD539JNZ datasheet pdf AD539JNZ equivalent AD539JNZ replacement AD539JNZ cross reference AD539JNZ vs AD539JD AD539JNZ 16-PDIP AD539JNZ 60 MHz multiplier AD539JNZ price AD539JNZ stock Analog Devices AD539JNZ AD539JNZ amplifier application circuit AD539JNZ two quadrant multiplier AD539JNZ footprint

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD539JNZ AD539 AD539JN AD539JD AD539SD/883B AD539SH/883B AD539JR analog multiplier analog divider two-quadrant multiplier dual-channel signal processing common X input Y1 signal channel Y2 signal channel wideband analog IC linear multiplier video-frequency bandwidth low-distortion signal processing 16-pin PDIP DIP package family through-hole mounting analog gain control amplitude modulation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ