AD677KD - 16-Bit 100 kSPS Serial ADC | Analog Devices
MPN: AD677KD ⚠ کۆتا کڕینAD677KD گشتی
A sampling ADC is a data-conversion IC that samples an analog input and converts it into a digital code for processing, measurement, or control. The AD677 belongs to the SAR ADC hierarchy, which combines sample-and-hold behavior with successive-approximation conversion. This architecture is useful where moderately high conversion rates, compact serialized data output, and precise measurement are more important than very high channel density.
The AD677’s defining feature is its on-chip autocalibration, which digitally corrects internal nonlinearities to improve conversion accuracy. Its serial output reduces the number of signal interconnects compared with a parallel ADC, while the integrated sample-and-hold function simplifies analog front-end implementation. The 16-pin through-hole package also remains practical for legacy industrial, instrumentation, control, and educational platforms.
Internally, the switched-capacitor and charge-redistribution architecture supports a nominal 100 kSPS throughput and a total conversion time of 10 microseconds. The advertised 1 MHz full-power bandwidth supports acquisition of higher-frequency input signals than the 100 kSPS conversion rate alone might suggest, although system-level settling, sampling, and anti-aliasing requirements still determine usable dynamic performance.
Typical uses include industrial process measurement, laboratory instrumentation, sensor signal acquisition, industrial control, and embedded measurement systems. The device is especially appropriate when an existing 16-pin DIP footprint, serial interface, and conventional precision ADC architecture are required rather than a high-density mixed-signal converter.
When designing around the AD677KD, pay particular attention to input range, reference voltage, digital interface timing, analog settling, and the sampling network. The available source information does not specify every pin function or operating limit, so those details should be confirmed directly in the manufacturer datasheet before a new PCB is released.
This page combines verified manufacturer and distributor information, lifecycle status, package data, practical design considerations, and narrowly scoped drop-in alternatives. It also distinguishes confirmed specifications from unavailable details instead of inferring unverified electrical values.
جێگرەوەکانی جێگۆڕکێ بۆ AD677KD — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD677KD (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Total Conversion Time, Analog Supply, Architecture, Input Count.
AD677BD
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD677KNZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD677JNZ
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD677ANZ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD677BNZ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD677KD زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 16 bit |
| ڕێژەی نموونەگرتن | 100 kSPS |
| Output Interface | Serial |
| Input Count | 1 input |
| Conversion Architecture | Successive-approximation register (SAR) |
| Internal Architecture | Switched-capacitor charge redistribution |
| Total Conversion Time | 10 us |
| Sample-and-Hold | Autocalibrating on-chip sample-and-hold |
| Missing Codes | No missing codes at 1 LSB |
| Signal-to-Noise Ratio | Approximately 99 dB |
| Total Harmonic Distortion | 92 dB |
| Full-Power Bandwidth | 1 MHz |
| پاکێج | 16-pin plastic DIP (16-PDIP) |
| ژمارەی پین | 16 pins |
| جۆری دامەزراندن | Through-hole |
| Temperature Grade | Commercial |
| Analog Supply Voltage | 12 V |
| دۆخی RoHS | Compliant |
| Lead-Free Status | Lead-free |
| Datasheet Architecture | Multipurpose 16-bit serial-output ADC |
ڕێنمایی ڕێکخستنی پینی AD677KD 16-pin plastic dip (16-pdip)
ڕێکخستنی پین بۆ AD677KD (پاکێجی 16-pin plastic dip (16-pdip)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD677KD.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD677KD گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Precision Sensor Acquisition, Laboratory Instrumentation, Industrial Control Systems, Communication and Network Monitoring, Audio and Audio Measurement Racks.
Industrial Process Measurement
The AD677KD fits industrial process-measurement channels that require a precise digital result without a high-density converter. Its 16-bit resolution provides 65,536 possible output codes, while the 100 kSPS rate and 10 microsecond conversion time support moderately fast process sampling. The switched-capacitor charge-redistribution SAR architecture and on-chip autocalibration help reduce internal conversion error. Place conditioned transducer signals within the supported input range and add anti-alias filtering before the converter. For factory systems, isolate noisy actuators from the analog measurement path, use a clean reference, and verify the complete signal chain against the manufacturer’s settling and timing requirements.
پێشنیارکراو
Precision Sensor Acquisition
AD677KD is appropriate for precision sensors whose analog output changes more slowly than the converter’s 100 kSPS throughput. The 16-bit resolution preserves fine changes in low-level sensor signals, while the integrated autocalibrating sample-and-hold function simplifies the acquisition stage. Its approximately 99 dB signal-to-noise performance and 92 dB THD are useful when the downstream measurement chain is similarly well conditioned. Connect the sensor through an instrumentation or differential front end, reference the converter consistently, and account for sensor excitation drift and noise. The ADC should not compensate for an unstable reference, inadequate settling time, or an input signal that exceeds the supported common-mode range.
پێشنیارکراو
Laboratory Instrumentation
The AD677KD can serve as the measurement ADC in laboratory instruments requiring a straightforward 16-bit serial data path. Its 100 kSPS conversion rate and 1 MHz full-power bandwidth provide a useful balance between measurement speed and precision, while the 16-pin DIP package simplifies construction on legacy instrument boards. Use a low-noise reference, short analog traces, and a deliberate return-current layout to preserve the converter’s reported dynamic performance. For repetitive measurements, allow the on-chip autocalibration process to operate as described by Analog Devices. Avoid treating the 1 MHz bandwidth figure as permission to sample arbitrary high-frequency signals without adequate sampling and anti-aliasing analysis.
پێشنیارکراو
Industrial Control Systems
AD677KD supports closed-loop industrial control and monitoring functions that need accurate analog feedback but do not require simultaneous high-rate sampling of many channels. The 100 kSPS throughput allows rapid feedback acquisition, and the 16-bit output gives the controller enough resolution for many pressure, position, temperature, and analog process variables. The serial interface also reduces the number of connections required between the converter and a controller or peripheral. A practical implementation should isolate the analog input from switching regulators and digital clocks, provide local supply bypassing, and verify digital-interface timing. Firmware should also account for startup and autocalibration intervals before trusting the first converted samples.
پێشنیارکراو
Communication and Network Monitoring
The AD677KD may be used in communication equipment for monitoring analog control, supervision, or sensor nodes where 16-bit precision and 100 kSPS sampling are adequate. Its serial output supports compact connections to a digital controller, while the 100 kSPS rate is suitable for supervisory measurements rather than wideband waveform capture. The 1 MHz full-power bandwidth provides headroom for higher-frequency control signals, provided the converter receives a properly conditioned input. Keep the analog path away from high-energy clock and switching traces, use a quiet reference, and include filtering that prevents out-of-band content from aliasing into the measurement band. This use is primarily suitable for legacy or long-life platforms requiring a through-hole ADC.
پێشنیارکراو
Audio and Audio Measurement Racks
AD677KD can be used in legacy audio measurement racks, monitor controllers, or diagnostic equipment where an analog level or control signal must be digitized accurately. Its 16-bit resolution, approximately 99 dB signal-to-noise ratio, and 92 dB THD support precision amplitude measurement, while the 100 kSPS conversion rate is appropriate for many control and monitoring signals. The serial interface avoids a wide parallel bus, and the DIP package is practical for older rack hardware. Use a low-noise reference and shielded analog routing to prevent switching converters from limiting system noise performance. The component is better suited to measurement and supervisory audio channels than full-bandwidth PCM capture because its sampling rate is much lower than common high-resolution audio rates.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD677KD — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD677BD | AD677KNZ | AD677JNZ | AD677ANZ | AD677BNZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-PDIP | 16-pin DIP | 16-pin DIP | 16-pin DIP | 16-pin DIP | 16-pin DIP |
| Conversion Architecture | SAR | SAR | SAR | SAR | SAR | SAR |
جیاکەرەوە سەرەکییەکان
- Directly identified 16-bit, 100 kSPS serial-SAR conversion (بەراورد بەAD677BD)
- Autocalibrating on-chip sample-and-hold function (بەراورد بەAD677KNZ)
- Verified 1 MHz full-power bandwidth (بەراورد بەAD677JNZ)
- Compact serialized output in a legacy through-hole package (بەراورد بەAD677ANZ)
تێبینییەکانی دیزاین
The verified data identifies a 12 V analog supply but does not provide supply-current limits, so a definitive power budget cannot be calculated. Follow the manufacturer datasheet for analog and digital supply combinations, quiescent current, and operating limits. Place the required bypass capacitors close to the supply and ground pins, and keep digital return current out of the analog reference path. Because the AD677 is last time buy, also qualify alternate decoupling and power-supply arrangements before committing the design to an obsolete-device build.
Route the analog input and reference connections as short, quiet traces over a continuous ground plane, and keep them away from clock, serial-data, and switching-supply paths. The source-and-drain geometry of the internal switched-capacitor architecture makes stable reference and return paths important to conversion accuracy. Maintain the package’s recommended thermal and copper path even though it is a through-hole DIP. Prototype on a clean board with a grounded reference, because contamination, solder flux, and long analog traces can obscure the device’s reported noise and linearity performance.
Do not interpret the 1 MHz full-power bandwidth as a 1 MHz sampling rate; the documented conversion rate is 100 kSPS. Overly fast input signals must be filtered before the sample-and-hold input to prevent aliasing. Likewise, do not substitute an AD677 suffix based only on its 16-pin package: verify pin names, supply requirements, reference voltage, temperature grade, timing, and qualification status in the official ordering information. The target’s last-time-buy status makes this final review especially important before authorizing production substitutions.
Use a controlled clock and verify serial-data setup and hold timing at the receiving controller. The ADC’s serial interface reduces parallel-bus routing, but it does not eliminate the need for a clean return path. If the analog source has high source impedance, include an appropriate buffer or charge reservoir and verify settling against the 10 microsecond total conversion time. Avoid placing test-probe capacitance or long unprotected leads near the analog input because they can alter acquisition behavior and increase noise.
زانیاری پابەندبوون
A verified distributor listing describes AD677KD as RoHS-compliant, lead-free, and green. No explicit REACH, halogen-free, conflict-minerals, or automotive-qualification evidence was supplied. The part is listed as commercial grade.