MAX121EPE+ 14-Bit 308ksps ADC | Maxim Integrated
MPN: MAX121EPE+ ✓ چالاکMAX121EPE+ گشتی
An ADC is an analog-to-digital converter, a semiconductor that converts continuously varying voltage signals into numeric values for processing, measurement, or control. The MAX121 belongs to the successive-approximation ADC family and forms part of the broader signal-conversion and data-acquisition hierarchy. Its single-input architecture is useful when one measured analog channel must be converted rapidly without adding a multiplexer, while the serial output supports compact connections to DSP-based or microcontroller-based measurement systems.
Key specifications include 14-bit resolution, a maximum conversion rate of 308ksps, and 78dB signal-to-noise-plus-distortion performance. The integrated track-and-hold stage simplifies acquisition of changing analog signals, while the internal buried-zener reference reduces the need for an external precision reference. The 16-pin DIP provides a straightforward through-hole layout with a 2.54mm lead pitch. The MAX121EPE+ is identified as an industrial-temperature-grade component, making it appropriate for industrial instrumentation and embedded measurement systems where operating conditions exceed consumer-temperature expectations.
Technically, the converter uses a BiCMOS implementation to combine bipolar precision characteristics with CMOS interface functions. Its serial interface can operate with clocks from 1.1MHz to 5.5MHz, and all logic inputs and outputs are compatible with TTL and CMOS levels. This interface rate supports high-throughput conversion when the receiving processor can service serialized results at the corresponding clock frequency. The converter also includes application information for connecting it to popular digital signal processors, which simplifies integration into dedicated measurement engines.
Typical uses include industrial process monitoring, sensor-signal acquisition, laboratory data-acquisition systems, DSP-based control, and embedded instrumentation. In each case, the 308ksps throughput provides ample conversion margin for many rapidly sampled analog channels. A software-selectable or externally controlled sampling arrangement can also be used to connect the ADC to a broader signal chain, although the MAX121 itself provides one analog input.
When designing the circuit, prioritize a short, quiet analog-input path, a stable analog ground connection, and proper bypassing of the 5V supply. Keep digital clock and serial-data routing away from the sensitive input node to limit conversion error. Confirm the source impedance and acquisition interval so that the internal track-and-hold capacitor has sufficient time to settle before each conversion. Follow the manufacturer datasheet for input conditioning, reference configuration, clock timing, and interface signal definitions.
This product page combines the manufacturer’s core electrical and interface specifications with practical integration guidance, comparison data, and drop-in alternatives in the same 16-pin DIP format. That information helps engineers evaluate the MAX121EPE+ for precision data-acquisition and DSP-interface applications without relying only on basic catalog parameters.
جێگرەوەکانی جێگۆڕکێ بۆ MAX121EPE+ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX121EPE+ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Logic Compatibility, Architecture, Clock Frequency Range, Interface.
MAX121CPE+
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX121EPE
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX121CPE+
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX121CPA
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX121EPA
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX121EPE+ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 14 bit |
| Conversion Rate | 308 ksps |
| Signal-to-Noise Plus Distortion | 78 dB |
| Number of Analog Inputs | 1 channel |
| Conversion Architecture | Successive approximation (SAR) |
| Output Interface | Serial, DSP-compatible |
| ڤۆڵتیەی دابینکردن | 5 V |
| Clock Frequency Range | 1.1 MHz to 5.5 MHz |
| Logic Compatibility | TTL- and CMOS-compatible |
| Internal Reference | Low-drift, low-noise buried-zener voltage reference |
| Acquisition Circuit | On-chip track-and-hold |
| Process Technology | BiCMOS |
| پاکێج | 16-pin plastic DIP (16-PDIP) |
| جۆری دامەزراندن | Through-hole |
| Lead Pitch | 2.54 mm |
| Temperature Grade | Industrial |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| Lead-Free Status | unknown |
ڕێنمایی ڕێکخستنی پینی MAX121EPE+ 16-pin plastic dip (16-pdip)
ڕێکخستنی پین بۆ MAX121EPE+ (پاکێجی 16-pin plastic dip (16-pdip)). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX121EPE+.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MAX121EPE+ گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, DSP-Based Data Acquisition, Sensor Signal Acquisition, Laboratory Instrumentation, Embedded Control Systems, Waveform Monitoring.
Industrial Process Measurement
The MAX121EPE+ fits industrial process-measurement systems that acquire sensor signals under temperature conditions beyond commercial-grade limits. Its 14-bit resolution provides 16,384 quantization levels, while the 308ksps conversion rate supports rapid sampling of changing process variables. The industrial-grade MAX121EPE+ is used between a conditioned sensor or transducer and a DSP or embedded controller. Its on-chip track-and-hold stage and internal low-drift buried-zener reference reduce external analog complexity. Place the converter near the sensor input to minimize noise pickup, and use the 1.1MHz to 5.5MHz serial clock range to balance conversion throughput against processor data-handling capability.
پێشنیارکراو
DSP-Based Data Acquisition
The MAX121EPE+ is well suited to DSP-based acquisition front ends because its serial output can connect directly to the serial port of many digital signal processors. The interface supports 1.1MHz to 5.5MHz clocks with TTL- and CMOS-compatible signals, while the 308ksps ADC rate supplies high throughput for sampled measurements. A practical implementation places the ADC and its bypass capacitor near the DSP interface, then routes the clock and serial data on controlled PCB traces. The 14-bit resolution and 78dB SINAD provide useful dynamic range, while the internal track-and-hold and buried-zener reference simplify the analog signal chain. Clocking and data-capture timing must follow the manufacturer interface diagrams.
پێشنیارکراو
Sensor Signal Acquisition
The MAX121EPE+ can digitize conditioned outputs from pressure, temperature, strain, and position sensors when a high-speed serial ADC is preferred. Its 308ksps rate handles rapidly changing sensor waveforms, and its 14-bit conversion resolution preserves small signal changes across the selected input range. The internal track-and-hold captures the analog input while conversion proceeds, and the buried-zener reference supports repeatable measurements without a separate reference IC. Use suitable input amplification or filtering ahead of the ADC, keep the source impedance compatible with the acquisition interval, and isolate the analog input from switching clocks. The industrial temperature grade is useful for factory equipment where ambient conditions vary substantially.
پێشنیارکراو
Laboratory Instrumentation
The MAX121EPE+ is appropriate for compact laboratory instruments that require accurate conversion of low- or moderate-frequency analog measurements. Its 14-bit resolution and 78dB SINAD offer a practical balance between measurement detail, conversion speed, and circuit simplicity. The serial interface reduces the number of signal connections required by a parallel ADC, allowing the converter to be paired with a DSP or controller on a compact board. The internal track-and-hold and low-drift reference reduce external components, although analog filtering and careful grounding remain important. Confirm input range, acquisition time, and clock timing against the manufacturer datasheet before selecting the device for precision bench equipment.
پێشنیارکراو
Embedded Control Systems
The MAX121EPE+ can serve as the analog measurement front end in embedded control equipment that requires more resolution than a basic comparator or low-resolution converter. Its 308ksps throughput allows the controller to sample dynamic control inputs, while the serial interface limits wiring and board area. The BiCMOS device combines precision reference behavior, track-and-hold acquisition, and CMOS-compatible logic in one 16-pin DIP. Place the analog path away from processor clocks and switching regulators, provide local supply bypassing, and verify that the sensor source can charge the internal acquisition capacitor during the available sampling interval. The industrial-temperature grade supports use in machinery and environmental control equipment.
پێشنیارکراو
Waveform Monitoring
The MAX121EPE+ is suitable for waveform-monitoring systems that need higher sampling throughput and finer amplitude resolution than a low-resolution mixed-signal input. A 308ksps conversion rate and 14-bit resolution allow the system to capture time-varying signals with substantially more detail than an 8-bit converter. The serial output can feed a DSP for filtering, peak detection, or statistical analysis, and the internal track-and-hold simplifies acquisition of the incoming waveform. Analog bandwidth, source impedance, and acquisition settling determine the usable input range. Use a suitable anti-alias filter and keep clock and serial routing away from the input node to prevent digital coupling from reducing the converter’s 78dB SINAD capability.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ MAX121EPE+ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX121CPE+ | MAX121EPE | MAX121CPE | MAX121CPA | MAX121EPA |
|---|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | 16-pin plastic DIP (16-PDIP) | 16-pin plastic DIP (16-PDIP) - same package | 16-pin plastic DIP (16-PDIP) - same package | 16-pin plastic DIP (16-PDIP) - same package | 16-pin plastic DIP (16-PDIP) - same package | 16-pin plastic DIP (16-PDIP) - same package |
| Resolution | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Conversion Rate | 308 ksps | 308 ksps | 308 ksps | 308 ksps | 308 ksps | 308 ksps |
| Signal-to-Noise Plus Distortion | 78 dB | 78 dB | 78 dB | 78 dB | 78 dB | 78 dB |
| Number of Analog Inputs | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Clock Frequency Range | 1.1 MHz to 5.5 MHz | 1.1 MHz to 5.5 MHz | 1.1 MHz to 5.5 MHz | 1.1 MHz to 5.5 MHz | 1.1 MHz to 5.5 MHz | 1.1 MHz to 5.5 MHz |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Commercial | Industrial |
جیاکەرەوە سەرەکییەکان
- Industrial temperature grade within the MAX121 DIP family (بەراورد بەMAX121CPE+)
- High conversion throughput in a 16-pin through-hole package (بەراورد بەMAX121CPE)
- Integrated acquisition and precision reference reduce analog complexity (بەراورد بەMAX121EPE)
تێبینییەکانی دیزاین
Route the analog input directly to the MAX121EPE+ and keep the path short and away from the serial clock and data lines. Place the input-network components close to the converter, and connect analog and digital ground returns according to the manufacturer application guidance. The 78dB SINAD specification assumes a clean excitation and practical layout; long, high-impedance traces can allow coupled digital energy to raise conversion noise even when the converter itself is operating correctly.
Provide a stable 5V supply and place the recommended bypass capacitors immediately beside the supply and ground pins. Decoupling should be selected using the values and stability guidance in the manufacturer datasheet rather than a generic bulk-capacitor arrangement. Avoid routing high-current return paths through the converter’s analog-ground region, because supply and ground disturbances can directly affect the sampled code and degrade the advertised 14-bit performance.
Keep the serial clock and data traces short, route them away from the analog input, and use a ground reference adjacent to the digital interface when board space permits. The accepted clock range is 1.1MHz to 5.5MHz, but timing margins depend on the receiving processor and board loading. Review conversion timing, data setup, and hold requirements in the MAX121 datasheet before increasing the clock frequency.
Do not assume that the 308ksps conversion rate makes every source impedance acceptable. The internal track-and-hold capacitor must settle within the available acquisition interval, so source impedance, source voltage range, and sampling timing must be checked together. Likewise, a 16-pin DIP footprint match alone does not make every suffix interchangeable: verify temperature grade, electrical limits, and exact ordering code before substituting a variant.
زانیاری پابەندبوون
No RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact MAX121EPE+ orderable suffix. AEC-Q100 qualification is not applicable to this industrial-temperature ADC.