Analog Devices

AD9042AST - 12-Bit 41 MSPS ADC | Analog Devices

MPN: AD9042AST ✓ چالاک
Single +5 V Vdss 44-lead LQFP, 10 x 10 mm Package
MOQ: 1 |

AD9042AST گشتی

Analog Devices AD9042AST is a monolithic 12-bit analog-to-digital converter operating at up to 41 MSPS from a single +5 V supply, with CMOS-compatible digital outputs and an integrated track-and-hold circuit and reference in a 44-lead LQFP package. It combines a 12-bit conversion resolution with a 41 MSPS sampling rate for high-speed signal acquisition.

An ADC is a signal-conversion semiconductor that samples an analog voltage and converts it into a digital code for processing, storage, or transmission. The AD9042 belongs to the monolithic ADC hierarchy, where the converter, track-and-hold circuit, and reference are integrated on one chip. This integration reduces external component count while providing a complete conversion solution for high-speed measurement systems.

Key characteristics include 12-bit resolution, a maximum conversion rate of 41 MSPS, one analog input, a pipelined conversion architecture, and operation from a single 5 V supply. CMOS-compatible outputs simplify connection to digital logic. The manufacturer identifies the AD9042 family as a production device and describes the converter as low-power for its performance class. Its integrated reference and track-and-hold circuit also shorten the analog signal path.

The pipelined architecture supports high throughput by dividing the conversion process into internal stages. At 41 MSPS, the device is suitable for sampled signal systems that require substantially more bandwidth than conventional low-speed SAR converters. The 44-lead LQFP package exposes the analog input, digital data bus, clocking, control, power, and reference-related connections, while its relatively large lead pitch supports inspection and rework in conventional production processes.

Typical uses include communications infrastructure, industrial instrumentation, signal analysis, digital oscilloscope front ends, radar or sonar signal chains, and medical or scientific sampling systems. In each case, the design must accommodate high-speed clocking, controlled analog input impedance, adequate supply decoupling, and digital-output timing margin. AD9042AST datasheet information should guide input bandwidth, acquisition timing, reference requirements, and PCB signal-integrity design.

A primary design consideration is clock and signal integrity. Route the analog input and clock with short, controlled-impedance paths, keep high-speed digital outputs away from sensitive analog nodes, and place decoupling capacitors close to their associated supply pins. Verify sampling-edge timing and output settling against the downstream logic rather than relying only on nominal converter throughput.

This product page summarizes the AD9042AST operating characteristics, package information, practical applications, verified manufacturer references, and a strict drop-in assessment for related orderable devices. It also adds design guidance for high-speed ADC layouts and identifies where a complete pin description or exact cross-reference record must be confirmed against the manufacturer documentation before layout release.

جێگرەوەکانی جێگۆڕکێ بۆ AD9042AST — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

AD9042ASTZ

✅ جێگرەوەی ڕاستەوخۆ
📦 44-LQFP (10x10)
Identical 12-bit resolution and 41 MSPS rate; Z-order-code qualification and termination details must be checked against the required grade

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD9042S

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 44-LQFP (10x10)
Same 12-bit and 41 MSPS converter family and 44-lead package; AD9042S is identified as an aerospace-grade production variant

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD9042AST زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type Monolithic analog-to-digital converter
وردی 12 bit
Maximum Sampling Rate 41 MSPS
Architecture Pipelined ADC
Analog Input Count 1 input
ڤۆڵتیەی دابینکردن Single +5 V
Digital Output Interface CMOS-compatible parallel outputs
Integrated Reference Yes
Integrated Track-and-Hold Yes
پاکێج 44-lead LQFP, 10 x 10 mm
جۆری دامەزراندن Surface mount
Power Class Low power
دۆخی چرخەی ژیان Production

ڕێنمایی ڕێکخستنی پینی AD9042AST 44-lead lqfp, 10 x 10 mm

ڕێکخستنی پین بۆ AD9042AST (پاکێجی 44-lead lqfp, 10 x 10 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 44-lead lqfp, 10 x 10 mm بۆ AD9042AST

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD9042AST.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD9042AST گونجاوە بۆ 6 بەکارھێنانs: Communications Receiver Front End, Digital Oscilloscope Acquisition, Industrial Signal Analysis, Radar and Sonar Processing, Medical and Scientific Instrumentation, Test and Measurement Instrumentation.

🌐

Communications Receiver Front End

The AD9042AST fits communications receiver front ends that require rapid conversion of an intermediate-frequency or baseband analog waveform. Its 12-bit resolution preserves 4096 discrete amplitude levels, while the 41 MSPS pipelined conversion rate provides 24.4 ns between full-rate samples. The integrated track-and-hold circuit and reference reduce the number of external analog blocks, and CMOS-compatible outputs can feed an FPGA or digital signal processor. The practical constraint is clock quality: sampling jitter and analog input bandwidth must be selected to preserve the intended modulation performance rather than relying on nominal throughput alone.

📺

Digital Oscilloscope Acquisition

AD9042AST is suitable for digital oscilloscope and waveform-acquisition front ends where 41 MSPS supports broad-band signal capture and 12-bit resolution improves amplitude discrimination. The monolithic integration of the converter, track-and-hold circuit, and reference simplifies the front-end signal path. Parallel CMOS outputs can feed a capture FPGA, while the single +5 V rail simplifies supply planning. For accurate time-domain measurements, the design must control clock jitter, preserve a flat analog input bandwidth through the sampling network, and verify output timing against the acquisition logic.

🏭

Industrial Signal Analysis

The AD9042AST can serve industrial vibration, transient, and process-signal monitoring systems that need faster sampling than ordinary low-rate instrumentation converters. A 41 MSPS sampling rate captures more detail from short events, and the 12-bit code width supports digital filtering and amplitude analysis. The converter's on-chip track-and-hold and reference allow the analog front end to be designed around sensor conditioning and anti-alias filtering. Industrial deployments should include calibrated input protection, clock-quality diagnostics, and thermal analysis because continuous sampling at the maximum rate can increase system power and board temperature.

✈️

Radar and Sonar Processing

AD9042AST is appropriate for radar, sonar, and echo-processing chains where sampled return waveforms are converted for correlation, spectral analysis, or detection. The pipelined architecture supports a 41 MSPS data rate, and the 12-bit resolution provides a practical balance between dynamic range, converter speed, and output data volume. The integrated track-and-hold function shortens the sampled-input path, while the single +5 V operation simplifies embedded power distribution. System designers must match the source bandwidth to the converter, control clock phase noise, and ensure the digital processing fabric can accept the sustained parallel-output rate.

💊

Medical and Scientific Instrumentation

The AD9042AST can be used in scientific and medical instrumentation when a compact, high-speed sampler is required for waveform capture. The 12-bit resolution and 41 MSPS operation permit acquisition of rapidly changing sensor signals, while the integrated reference and track-and-hold circuit reduce external analog complexity. CMOS-compatible outputs support connection to digital acquisition logic. Medical designs must add the required isolation, protection, safety controls, and application-specific validation; the converter's data sheet alone does not establish medical-system compliance.

🔧

Test and Measurement Instrumentation

AD9042AST suits bench instrumentation that must capture repetitive or transient waveforms with greater timing resolution than a slow low-power ADC. The maximum sampling interval of approximately 24.4 ns allows rapid events to be represented with more points, while 12-bit quantization supports subsequent amplitude correction and filtering. Its 44-lead LQFP package is inspectable and reworkable, and the single +5 V rail can simplify laboratory or embedded power architecture. Measurement accuracy still depends on the input network, reference behavior, clock jitter, and calibration procedure specified by the complete instrument design.

کورتەی بەرهەمە پێشنیارکراوەکان

AD9042ASTZ Related 12-bit, 41 MSPS converter in the same LQFP family بەکارهێنراوە لە: Communications Receiver Front End, Digital Oscilloscope Acquisition, Industrial Signal Analysis, Medical and Scientific Instrumentation, Test and Measurement Instrumentation AD9042S Aerospace-family 12-bit, 41 MSPS ADC option for qualified environments بەکارهێنراوە لە: Radar and Sonar Processing
What is the AD9042AST?
The AD9042AST is a monolithic 12-bit analog-to-digital converter that samples at up to 41 MSPS and operates from a single +5 V supply. Analog Devices describes the device as a high-speed, high-performance, low-power converter with CMOS-compatible digital outputs, an on-chip track-and-hold circuit, and an integrated reference. It is packaged in a 44-lead LQFP measuring 10 x 10 mm.
What is the sampling rate and resolution of AD9042AST?
The AD9042AST provides 12-bit resolution at a maximum sampling rate of 41 MSPS. These two specifications define its principal signal-handling capability: one analog sample can be converted into a 12-bit digital code at up to 41 million samples per second. According to the Analog Devices AD9042 data sheet, Rev. B, the converter uses a pipelined architecture and includes the track-and-hold and reference functions on chip.
What supply voltage does AD9042AST use?
The AD9042AST operates from a single +5 V supply. This simplifies power architecture compared with converters that require separate analog and digital rails, while the integrated reference and track-and-hold functions support a compact conversion solution. According to the Analog Devices AD9042 data sheet, Rev. B, the device provides CMOS-compatible digital outputs at its maximum rate of 41 MSPS.
Where can I download the AD9042AST datasheet PDF?
The official AD9042AST datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9042.pdf. The manufacturer data sheet is Rev. B and should be used to verify the complete pin description, electrical characteristics, timing tables, recommended application circuit, package dimensions, and operating limits before releasing a PCB layout.
Where can I find the AD9042AST pinout?
The AD9042AST pinout should be taken from the Analog Devices AD9042 data sheet, Rev. B, using the 44-lead package pin-description table and the corresponding package drawing. The ADC has 44 leads in a 10 x 10 mm LQFP package, but signal names, power pins, clock pins, and data-bit assignments must be transcribed directly from the manufacturer document to prevent board-routing errors.
What can replace AD9042AST?
AD9042ASTZ is the closest documented same-manufacturer alternative because it is identified as a 12-bit, 41 MSPS, single-input pipelined ADC in the same 44-lead, 10 x 10 mm LQFP package. Its exact order code, grade, temperature range, and lead-finish details should still be compared with the AD9042AST data sheet. No cross-brand part is treated as a confirmed drop-in replacement without a matching pin and electrical specification.
Is AD9042AST the same as AD9042ASTZ?
AD9042AST and AD9042ASTZ are closely related 12-bit, 41 MSPS monolithic ADCs offered in a 44-lead, 10 x 10 mm LQFP package, but their order codes can carry different grade, temperature, or termination conventions. The Analog Devices ordering information and data sheet must be checked to confirm those conventions before substitution, especially when the original design depends on a specific automotive, aerospace, or lead-free procurement grade.
What is the best drop-in replacement for AD9042AST?
AD9042ASTZ is the best-supported drop-in candidate identified for AD9042AST because both are described as 12-bit, 41 MSPS, single-input pipelined converters in a 44-lead, 10 x 10 mm LQFP package. A true drop-in decision also requires identical pin functions, supply sequencing, clock polarity, output coding, timing, and temperature grade. Confirm those points in the Analog Devices documentation before approving the substitution.
AD9042AST vs AD9042ASTZ — which is better?
AD9042AST is the appropriate choice when its specified temperature grade, package termination, and qualification status match the original equipment requirements. AD9042ASTZ is preferable when the required procurement grade is explicitly represented by the Z suffix and its orderable configuration satisfies the same electrical and environmental requirements. Both devices are listed at 12-bit resolution and 41 MSPS in the 44-lead LQFP format.
When should I choose AD9042AST over another 12-bit ADC?
Choose AD9042AST when the design requires a 12-bit monolithic ADC operating at up to 41 MSPS with an integrated track-and-hold circuit, integrated reference, CMOS-compatible outputs, and a single +5 V supply. A lower-rate converter may be preferable for slower acquisition, while a higher-resolution or faster device may be needed for wider dynamic range or greater bandwidth. Package, clocking, and interface requirements must match the board.
Is AD9042AST suitable for communications and signal analysis?
The AD9042AST is suitable for communications and signal-analysis front ends that need a 12-bit conversion rate of up to 41 MSPS. Its pipelined architecture, integrated track-and-hold circuit, single +5 V supply, and CMOS-compatible outputs support compact high-speed acquisition stages. The analog bandwidth, clock jitter, input drive, and digital timing margin must still satisfy the specific modulation or measurement requirement.
How do I design a PCB for AD9042AST?
Place the AD9042AST close to the source and acquisition circuitry, keep the analog input trace short, and route the sampling clock as a controlled-impedance signal with minimal skew and jitter. Decouple the supply pins locally, connect the thermal and ground structures as directed in the manufacturer package information, and keep switching-node energy away from the analog input. Verify signal integrity and timing at the maximum 41 MSPS operating rate.
Does AD9042AST need an external reference?
The AD9042AST incorporates the reference function on the monolithic converter, as stated in the Analog Devices AD9042 data sheet, Rev. B. Board design should nevertheless follow the manufacturer reference circuit and grounding recommendations because reference noise, supply coupling, and high-frequency return paths can still affect conversion performance. Use the data sheet schematic and layout guidance as the controlling reference for external components.
Where can I buy AD9042AST and what is its lead time?
Use the Request a Quote form on this page to request current AD9042AST availability, order quantities, and lead time for the exact order code and package configuration. The manufacturer lists the AD9042 family as production, but inventory and delivery commitments can vary by quantity and supply channel. Submit the required quantity, date code requirements, and destination with the quote request.
What are the key specifications of AD9042AST that engineers should know?
The principal AD9042AST specifications are 12-bit resolution, a maximum sampling rate of 41 MSPS, one analog input, pipelined conversion, a single +5 V supply, CMOS-compatible digital outputs, integrated track-and-hold, and an integrated reference. The converter is offered in a 44-lead, 10 x 10 mm LQFP package. These characteristics make it a complete monolithic ADC for high-speed acquisition and signal-processing systems.

داتای سەرچاوەی ئەندازیاری بۆ AD9042AST — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose AD9042AST when the acquisition system specifically needs a production 12-bit monolithic ADC with up to 41 MSPS conversion, an integrated track-and-hold circuit and reference, CMOS-compatible outputs, and a single +5 V supply. AD9042ASTZ is the closest order-code alternative when its qualification, temperature, termination, and procurement conventions match the design. Choose AD9042S for aerospace-oriented systems requiring that documented family variant. Before approving any substitution, compare the exact pin table, absolute maximum ratings, recommended operating conditions, AC timing, DC accuracy, input range, and package drawings. A lower-speed ADC may be preferable when full-rate acquisition is unnecessary, while a higher-resolution converter may be required when the allowable quantization error is tighter.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AD9042ASTZ AD9042S
Brand Analog Devices Analog Devices Analog Devices
Package 44-LQFP (10x10) 44-LQFP (10x10) 44-LQFP (10x10)
Resolution 12 bit 12 bit 12 bit
Maximum Sampling Rate 41 MSPS 41 MSPS 41 MSPS
Architecture Pipelined ADC Pipelined ADC Pipelined ADC
Analog Input Count 1 input 1 input 1 input
Supply Voltage Single +5 V Single +5 V Single +5 V
Digital Output Interface CMOS-compatible parallel outputs CMOS-compatible parallel outputs CMOS-compatible parallel outputs
Integrated Reference Yes Yes Yes
Lifecycle Status Production Production Production aerospace variant

جیاکەرەوە سەرەکییەکان

  • Complete monolithic high-speed conversion function (بەراورد بەAD9042ASTZ)
  • Single-supply operation reduces rail complexity (بەراورد بەAD9042ASTZ)
  • Production aerospace-family alternative for qualified systems (بەراورد بەAD9042S)

تێبینییەکانی دیزاین

Treat the analog input and sampling clock as coupled high-speed signals. Keep the AD9042AST close to the source, minimize the analog-input trace length, and place input-network components where their intended return paths remain continuous. The 41 MSPS conversion rate corresponds to approximately 24.4 ns per sample, so even a short input or clock path can affect sampling accuracy. Cross-check every pin against the Analog Devices AD9042 data sheet, Rev. B, before assigning PCB tracks.

Place the supply bypass capacitors directly beside the appropriate AD9042AST supply and ground pins, and provide a quiet return path for high-frequency currents. The device operates from a single +5 V supply, but the analog and digital currents still switch through the package and PCB. Estimate rail droop from the simultaneous output-data rate and digital load, then verify the effect through layout simulation and measurement rather than treating the nominal supply voltage as sufficient.

Route the sampling clock with controlled impedance, short stubs, and symmetric geometry to minimize skew between the clock and data-capture circuitry. Account for source and receiver timing in the end-to-end acquisition budget at 41 MSPS. If the source is differential or uses a non-CMOS voltage, include the required level conversion or ADC driver instead of assuming the AD9042AST input can accept every waveform directly.

Do not infer pin identity from the package position or from the AD9042ASTZ listing alone. Use the manufacturer pin-description table for the exact order code, distinguish analog and digital grounds according to the recommended layout, and include the external components shown in the application circuit. Also verify temperature grade, qualification status, and order-code suffix before substituting AD9042ASTZ or AD9042S for AD9042AST.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The Analog Devices AD9042 product information identifies the AD9042 family as production and describes the AD9042S variant as aerospace-oriented. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact order-code documentation before compliance is claimed.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

AD9042AST datasheet AD9042AST specifications AD9042AST pinout AD9042AST datasheet pdf AD9042AST replacement AD9042AST equivalent AD9042AST vs AD9042ASTZ AD9042AST 44 LQFP AD9042AST application circuit Analog Devices AD9042AST AD9042AST price AD9042AST stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD9042AST AD9042ASTZ AD9042S 12-bit ADC analog-to-digital converter monolithic ADC pipelined ADC track-and-hold circuit integrated reference 41 MSPS single +5 V supply CMOS-compatible digital output 44-lead LQFP LQFP package family surface-mount semiconductor high-speed signal acquisition parallel digital interface anti-alias filter clock jitter RoHS status REACH status AEC-Q100 qualification communications receiver industrial instrumentation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ