AD9042AST - 12-Bit 41 MSPS ADC | Analog Devices
MPN: AD9042AST ✓ AktifAD9042AST Ringkasan
An ADC is a signal-conversion semiconductor that samples an analog voltage and converts it into a digital code for processing, storage, or transmission. The AD9042 belongs to the monolithic ADC hierarchy, where the converter, track-and-hold circuit, and reference are integrated on one chip. This integration reduces external component count while providing a complete conversion solution for high-speed measurement systems.
Key characteristics include 12-bit resolution, a maximum conversion rate of 41 MSPS, one analog input, a pipelined conversion architecture, and operation from a single 5 V supply. CMOS-compatible outputs simplify connection to digital logic. The manufacturer identifies the AD9042 family as a production device and describes the converter as low-power for its performance class. Its integrated reference and track-and-hold circuit also shorten the analog signal path.
The pipelined architecture supports high throughput by dividing the conversion process into internal stages. At 41 MSPS, the device is suitable for sampled signal systems that require substantially more bandwidth than conventional low-speed SAR converters. The 44-lead LQFP package exposes the analog input, digital data bus, clocking, control, power, and reference-related connections, while its relatively large lead pitch supports inspection and rework in conventional production processes.
Typical uses include communications infrastructure, industrial instrumentation, signal analysis, digital oscilloscope front ends, radar or sonar signal chains, and medical or scientific sampling systems. In each case, the design must accommodate high-speed clocking, controlled analog input impedance, adequate supply decoupling, and digital-output timing margin. AD9042AST datasheet information should guide input bandwidth, acquisition timing, reference requirements, and PCB signal-integrity design.
A primary design consideration is clock and signal integrity. Route the analog input and clock with short, controlled-impedance paths, keep high-speed digital outputs away from sensitive analog nodes, and place decoupling capacitors close to their associated supply pins. Verify sampling-edge timing and output settling against the downstream logic rather than relying only on nominal converter throughput.
This product page summarizes the AD9042AST operating characteristics, package information, practical applications, verified manufacturer references, and a strict drop-in assessment for related orderable devices. It also adds design guidance for high-speed ADC layouts and identifies where a complete pin description or exact cross-reference record must be confirmed against the manufacturer documentation before layout release.
Alternatif penggantian untuk AD9042AST — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
AD9042ASTZ
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
AD9042S
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
AD9042AST Rating Maksimal & Karakteristik Listrik
| Converter Type | Monolithic analog-to-digital converter |
| Resolusi | 12 bit |
| Maximum Sampling Rate | 41 MSPS |
| Architecture | Pipelined ADC |
| Analog Input Count | 1 input |
| Tegangan Pemuat | Single +5 V |
| Digital Output Interface | CMOS-compatible parallel outputs |
| Integrated Reference | Yes |
| Integrated Track-and-Hold | Yes |
| Paket | 44-lead LQFP, 10 x 10 mm |
| Tipe Mounting | Surface mount |
| Power Class | Low power |
| Status Lingkungan Hidup | Production |
AD9042AST 44-lead lqfp, 10 x 10 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk AD9042AST (44-lead lqfp, 10 x 10 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk AD9042AST.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
AD9042AST cocok untuk 6 aplikasis: Communications Receiver Front End, Digital Oscilloscope Acquisition, Industrial Signal Analysis, Radar and Sonar Processing, Medical and Scientific Instrumentation, Test and Measurement Instrumentation.
Communications Receiver Front End
The AD9042AST fits communications receiver front ends that require rapid conversion of an intermediate-frequency or baseband analog waveform. Its 12-bit resolution preserves 4096 discrete amplitude levels, while the 41 MSPS pipelined conversion rate provides 24.4 ns between full-rate samples. The integrated track-and-hold circuit and reference reduce the number of external analog blocks, and CMOS-compatible outputs can feed an FPGA or digital signal processor. The practical constraint is clock quality: sampling jitter and analog input bandwidth must be selected to preserve the intended modulation performance rather than relying on nominal throughput alone.
Direkomendasikan
Digital Oscilloscope Acquisition
AD9042AST is suitable for digital oscilloscope and waveform-acquisition front ends where 41 MSPS supports broad-band signal capture and 12-bit resolution improves amplitude discrimination. The monolithic integration of the converter, track-and-hold circuit, and reference simplifies the front-end signal path. Parallel CMOS outputs can feed a capture FPGA, while the single +5 V rail simplifies supply planning. For accurate time-domain measurements, the design must control clock jitter, preserve a flat analog input bandwidth through the sampling network, and verify output timing against the acquisition logic.
Direkomendasikan
Industrial Signal Analysis
The AD9042AST can serve industrial vibration, transient, and process-signal monitoring systems that need faster sampling than ordinary low-rate instrumentation converters. A 41 MSPS sampling rate captures more detail from short events, and the 12-bit code width supports digital filtering and amplitude analysis. The converter's on-chip track-and-hold and reference allow the analog front end to be designed around sensor conditioning and anti-alias filtering. Industrial deployments should include calibrated input protection, clock-quality diagnostics, and thermal analysis because continuous sampling at the maximum rate can increase system power and board temperature.
Direkomendasikan
Radar and Sonar Processing
AD9042AST is appropriate for radar, sonar, and echo-processing chains where sampled return waveforms are converted for correlation, spectral analysis, or detection. The pipelined architecture supports a 41 MSPS data rate, and the 12-bit resolution provides a practical balance between dynamic range, converter speed, and output data volume. The integrated track-and-hold function shortens the sampled-input path, while the single +5 V operation simplifies embedded power distribution. System designers must match the source bandwidth to the converter, control clock phase noise, and ensure the digital processing fabric can accept the sustained parallel-output rate.
Direkomendasikan
Medical and Scientific Instrumentation
The AD9042AST can be used in scientific and medical instrumentation when a compact, high-speed sampler is required for waveform capture. The 12-bit resolution and 41 MSPS operation permit acquisition of rapidly changing sensor signals, while the integrated reference and track-and-hold circuit reduce external analog complexity. CMOS-compatible outputs support connection to digital acquisition logic. Medical designs must add the required isolation, protection, safety controls, and application-specific validation; the converter's data sheet alone does not establish medical-system compliance.
Direkomendasikan
Test and Measurement Instrumentation
AD9042AST suits bench instrumentation that must capture repetitive or transient waveforms with greater timing resolution than a slow low-power ADC. The maximum sampling interval of approximately 24.4 ns allows rapid events to be represented with more points, while 12-bit quantization supports subsequent amplitude correction and filtering. Its 44-lead LQFP package is inspectable and reworkable, and the single +5 V rail can simplify laboratory or embedded power architecture. Measurement accuracy still depends on the input network, reference behavior, clock jitter, and calibration procedure specified by the complete instrument design.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk AD9042AST — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | AD9042ASTZ | AD9042S |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 44-LQFP (10x10) | 44-LQFP (10x10) | 44-LQFP (10x10) |
| Resolution | 12 bit | 12 bit | 12 bit |
| Maximum Sampling Rate | 41 MSPS | 41 MSPS | 41 MSPS |
| Architecture | Pipelined ADC | Pipelined ADC | Pipelined ADC |
| Analog Input Count | 1 input | 1 input | 1 input |
| Supply Voltage | Single +5 V | Single +5 V | Single +5 V |
| Digital Output Interface | CMOS-compatible parallel outputs | CMOS-compatible parallel outputs | CMOS-compatible parallel outputs |
| Integrated Reference | Yes | Yes | Yes |
| Lifecycle Status | Production | Production | Production aerospace variant |
Diferensiator Kunci
- Complete monolithic high-speed conversion function (vsAD9042ASTZ)
- Single-supply operation reduces rail complexity (vsAD9042ASTZ)
- Production aerospace-family alternative for qualified systems (vsAD9042S)
Catatan Desain
Treat the analog input and sampling clock as coupled high-speed signals. Keep the AD9042AST close to the source, minimize the analog-input trace length, and place input-network components where their intended return paths remain continuous. The 41 MSPS conversion rate corresponds to approximately 24.4 ns per sample, so even a short input or clock path can affect sampling accuracy. Cross-check every pin against the Analog Devices AD9042 data sheet, Rev. B, before assigning PCB tracks.
Place the supply bypass capacitors directly beside the appropriate AD9042AST supply and ground pins, and provide a quiet return path for high-frequency currents. The device operates from a single +5 V supply, but the analog and digital currents still switch through the package and PCB. Estimate rail droop from the simultaneous output-data rate and digital load, then verify the effect through layout simulation and measurement rather than treating the nominal supply voltage as sufficient.
Route the sampling clock with controlled impedance, short stubs, and symmetric geometry to minimize skew between the clock and data-capture circuitry. Account for source and receiver timing in the end-to-end acquisition budget at 41 MSPS. If the source is differential or uses a non-CMOS voltage, include the required level conversion or ADC driver instead of assuming the AD9042AST input can accept every waveform directly.
Do not infer pin identity from the package position or from the AD9042ASTZ listing alone. Use the manufacturer pin-description table for the exact order code, distinguish analog and digital grounds according to the recommended layout, and include the external components shown in the application circuit. Also verify temperature grade, qualification status, and order-code suffix before substituting AD9042ASTZ or AD9042S for AD9042AST.
Informasi Konformitas
The Analog Devices AD9042 product information identifies the AD9042 family as production and describes the AD9042S variant as aerospace-oriented. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact order-code documentation before compliance is claimed.