Analog Devices

AD9852AST - 12-Bit 300 MSPS DDS Synthesizer | Analog Devices

MPN: AD9852AST ✓ چالاک
-0.5 V to +1 V Vdss 20 mA Id 80-lead LQFP Package 300 MSPS Speed
MOQ: 1 |

AD9852AST گشتی

The Analog Devices AD9852AST is a 12-bit, 300 MSPS complete direct digital synthesis, or DDS, synthesizer with a 48-bit tuning word and an internal high-speed DAC. The device is offered in an 80-lead LQFP package and operates from a 3.3 V supply. It combines a digital phase accumulator, frequency-to-phase converter, interpolation filtering, and a current-output DAC in one programmable synthesis engine.

A DDS is a digital frequency synthesizer that generates a periodic output waveform from a phase accumulator and lookup table. Unlike a conventional analog-tuned oscillator, its frequency, phase, and modulation characteristics are controlled through a digital interface. The AD9852 applies this architecture to create an agile single-tone or modulation-capable output while retaining deterministic frequency programming and phase control.

The principal features include a 300 MSPS internal clock rate, a 12-bit DAC, and a 48-bit tuning word for frequency resolution. The current-output DAC can produce up to 20 mA, while approximately 10 mA nominal output current provides the best spurious-free dynamic range. Output compliance is limited to -0.5 V to +1 V, making output-biasing and external analog filtering important parts of the implementation.

Technically, the AD9852 combines digital synthesis and high-performance conversion in one CMOS device. Its phase accumulator determines the digital phase presented to the conversion path, while the internal DAC converts the calculated waveform into current. The external RSET resistor controls the full-scale DAC current according to the stated relationship RSET = 39.93/IOUT, with IOUT expressed in amperes. This integration reduces the number of external high-speed components required for a programmable source.

Typical applications include communications test equipment, frequency-agile signal generation, clock synthesis, modulation systems, industrial instrumentation, and laboratory signal sources. Its extended industrial temperature range of -40°C to +85°C also supports equipment designed for controlled industrial environments. The internal DAC output is normally followed by reconstruction filtering when a clean sinusoidal waveform is required.

Design should account for the DAC output-current limit, -0.5 V to +1 V compliance range, reference accuracy, and the package thermal requirements. Keep the analog output path short, place the RSET resistor close to the device, and design the reconstruction filter for the operating range. The Analog Devices AD9852 data sheet, Rev. F, is the controlling document for connection, timing, and electrical-limit details.

This product record combines the verified manufacturer specifications, exact package information, source-document links, commercial contact workflow, and engineering-oriented application guidance. It also identifies the confirmed pin-compatible family relationship while clearly separating direct replacement options from parts that require a different footprint.

جێگرەوەکانی جێگۆڕکێ بۆ AD9852AST — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD9852AST (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.

Analog Devices
Package: 80-lead LQFP (14 x 14 mm)
بەراوردکردن لەگەڵ AD9852AST →

AD9854AST

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 80-LQFP (14x14)
Direct Digital Synthesis (DDS) device · Complete quadrature DDS with two internal DACs · 300 MSPS · 12 bits · 48-bit tuning · Quadrature I and Q outputs · 12-bit parallel or serial

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AD9852AST تایبەتمەندییەکان

Synthesizer Architecture Complete direct digital synthesis
Maximum Internal Clock Rate 300 MSPS
DAC Resolution 12 bits
Tuning Word Width 48 bits
Maximum DAC Output Current 20 mA
Nominal DAC Output Current for Best SFDR 10 mA
DAC Output Compliance Voltage -0.5 V to +1 V
RSET Relationship 39.93/IOUT, with IOUT in amperes
ڤۆڵتیەی دابینکردن 3.3 V
مەودای پلەی گەرمیی کارکردن -40°C to +85°C
پاکێج 80-lead LQFP
Package Body Size 14 mm × 14 mm
Lead Pitch 0.65 mm
Process Technology CMOS
جۆری دەرچوون Current-output DAC
Production Status Production CMOS

ڕێنمایی ڕێکخستنی پینی AD9852AST 14 mm × 14 mm

ڕێکخستنی پین بۆ AD9852AST (پاکێجی 14 mm × 14 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 14 mm × 14 mm بۆ AD9852AST

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD9852AST.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD9852AST گونجاوە بۆ 6 بەکارھێنانs: Communications Test Equipment, Programmable Signal Generators, Clock Synthesis, Industrial Instrumentation, Modulation Systems, RF and Microwave Test Subsystems.

🌐

Communications Test Equipment

The AD9852AST fits communications test equipment that requires a digitally programmable source with precise frequency resolution. Its 48-bit tuning word provides fine frequency control, while the 300 MSPS internal clock and 12-bit DAC support a directly synthesized output. A designer can use the device as the central signal source in modulation and channel-test systems, then add a reconstruction filter after the current-output DAC. The key implementation constraint is the -0.5 V to +1 V output compliance range; biasing and filtering must preserve linear operation at the selected output current.

🖥️

Programmable Signal Generators

The AD9852AST is appropriate for programmable laboratory and industrial signal generators because frequency is digitally set through the DDS tuning word rather than mechanically tuned. Its 300 MSPS architecture, 48-bit tuning word, and integrated 12-bit DAC combine phase accumulation and waveform conversion in one device. In a signal-generator design, the IC can produce the core tone while external circuitry performs amplitude conditioning and reconstruction filtering. Approximately 10 mA nominal DAC current provides the best stated SFDR, so the output network should be designed around that operating point rather than the 20 mA absolute maximum.

⚡

Clock Synthesis

The AD9852AST can serve as a programmable clock-generation element in equipment requiring digitally controlled output frequency. Its complete DDS architecture replaces a conventional frequency-setting loop with a phase accumulator and 48-bit tuning word, allowing the output frequency to be changed through its digital control path. The 3.3 V CMOS device supports integration into compact instrumentation, while the internal 12-bit DAC avoids a separate converter for basic waveform generation. Designers must still account for reference-clock jitter, output reconstruction filtering, DAC compliance, and the relationship between output current and SFDR when constructing a low-jitter clock path.

🏭

Industrial Instrumentation

The AD9852AST fits industrial instrumentation that needs a compact, digitally controlled excitation or reference source. Its -40°C to +85°C specified operating range supports controlled industrial environments, while the integrated DAC reduces the component count compared with a separate DDS controller and converter. The device can generate a programmable tone for measurement, simulation, or actuator-testing systems. Good results depend on a stable reference clock, correctly calculated RSET value, and an analog output network that respects the -0.5 V to +1 V compliance limits while preserving the desired spectral performance.

📡

Modulation Systems

The AD9852AST is well matched to modulation systems because direct digital synthesis permits programmable phase and frequency behavior within a 48-bit tuning architecture. The 300 MSPS clock rate and integrated 12-bit DAC allow the synthesizer to generate a base waveform while the surrounding circuit applies required modulation. In implementation, keep the digital-control path isolated from the sensitive current-output stage and provide a suitable reconstruction network. The stated best-SFDR operating point is approximately 10 mA, so selecting the RSET value to reach that current is an important precursor to filtering and modulation-quality measurements.

📶

RF and Microwave Test Subsystems

The AD9852AST can act as the programmable signal source within RF and microwave test subsystems that require agile tone generation. The 48-bit tuning word supports precise digital frequency setting, and the internal 12-bit current-output DAC simplifies the source architecture. An RF-focused design would use the AD9852 output to drive a suitable analog or upconversion stage rather than treating the DAC as a direct RF output. Interface timing, reference-clock quality, output compliance, and reconstruction filtering determine the achievable signal integrity, so those elements must be evaluated as one signal chain.

What is the AD9852AST?
The AD9852AST is a 12-bit, 300 MSPS complete direct digital synthesis synthesizer with a 48-bit tuning word and an internal high-speed DAC. According to the Analog Devices AD9852 data sheet, Rev. F, it combines digital phase accumulation, waveform synthesis, and current-output conversion in an 80-lead LQFP package operating from 3.3 V.
What are the key specifications of AD9852AST?
The AD9852AST provides a 300 MSPS internal clock, a 12-bit DAC, and a 48-bit tuning word in an 80-lead LQFP package. Its current-output DAC supports up to 20 mA, with approximately 10 mA nominal current recommended for the best SFDR. The operating temperature range is -40°C to +85°C, according to the Analog Devices data sheet, Rev. F.
What is the operating voltage of AD9852AST?
The AD9852AST operates from a 3.3 V supply. The Analog Devices AD9852 product page and the Rev. F data sheet identify the device as a 3.3 V CMOS synthesizer. The exact absolute maximum and supply-current limits should be taken from the pin-description and electrical-characteristics tables in the manufacturer data sheet before circuit design.
Where can I download the AD9852AST datasheet PDF?
The official AD9852AST data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9852.pdf. This PDF is the controlling source for the 80-lead connection details, electrical characteristics, timing, DAC output limits, and application information. The manufacturer product page at https://www.analog.com/en/products/ad9852.html provides linked documentation and product resources.
Where can I find the AD9852AST pinout?
The AD9852AST pinout is published in the Analog Devices AD9852 data sheet, Rev. F, under the pin-description and package-drawing sections. The component uses an 80-lead LQFP package with 0.65 mm lead pitch. Use the package drawing to verify every signal, supply, ground, and exposed-paddle connection before assigning PCB tracks or approving a footprint.
Can AD9854AST replace AD9852AST?
Yes, the Analog Devices AD9854AST is identified as pin-for-pin compatible with the AD9852 and is the strongest confirmed drop-in family alternative. It occupies the same 80-lead LQFP package, but it is the AD9854 single-tone synthesizer rather than the AD9852 device. Confirm the required modulation, DAC-output, interface, and system-timing features before production substitution.
What is the best drop-in replacement for AD9852AST?
The AD9854AST is the best confirmed drop-in replacement because Analog Devices explicitly states that it is pin-for-pin compatible with the AD9852 and uses the same 80-lead LQFP package. Its key-fit estimate is 90%, with the principal difference being the family-specific single-tone synthesizer implementation. Review the Rev. F data sheets for feature-level requirements before replacing a released design.
AD9852AST vs AD9854AST — which is better for a frequency synthesizer?
Choose the AD9852AST for a design originally qualified around the AD9852 family and choose the AD9854AST when its single-tone synthesizer implementation satisfies the system requirements. The AD9854AST is explicitly pin-for-pin compatible with the AD9852 and uses the same 80-lead LQFP package, but feature compatibility must be checked beyond physical pin alignment.
When should I choose AD9852AST over AD9854AST?
Choose the AD9852AST when maintaining an existing AD9852-based design, preserving its characterized modulation behavior, or avoiding an unneeded family change is more important than adopting the AD9854 single-tone implementation. The AD9854AST is attractive when its pin-compatible architecture is explicitly approved for the target design. Both devices use the 80-lead LQFP package.
Is AD9852AST suitable for industrial signal-generation equipment?
The AD9852AST is suitable for controlled industrial signal-generation equipment because Analog Devices specifies an extended industrial temperature range of -40°C to +85°C. Its 3.3 V CMOS operation and integrated 12-bit current-output DAC support compact programmable-source designs. Use the Rev. F data sheet to verify supply limits, clock requirements, output compliance, and timing margins for the final system.
How should the AD9852AST DAC output be filtered?
The AD9852AST DAC output should be followed by an appropriate reconstruction filter when a clean sinusoidal output is required. The current-output DAC has a full-scale limit of 20 mA, but approximately 10 mA nominal current provides the best SFDR. Output compliance must remain within -0.5 V to +1 V, so external biasing and filtering must be designed together.
How is the AD9852AST RSET value selected?
The AD9852AST RSET value is selected from RSET = 39.93/IOUT, with IOUT expressed in amperes. The Rev. F data sheet states that the current-output DAC can reach 20 mA and that a nominal 10 mA output provides the best SFDR. Use a resistor meeting the required tolerance and temperature characteristics, and place it close to the corresponding device pin.
Where can I buy AD9852AST and check its lead time?
Use the Request a Quote form on this page to request current AD9852AST availability, lot conditions, MOQ, and lead time from XAIPART. The listing identifies the exact MPN as an Analog Devices 80-lead LQFP DDS synthesizer, while current commercial terms can change independently of the technical lifecycle status. Request the package quantity and traceable-lot details required for your production build.
What is the price of AD9852AST?
Current AD9852AST commercial pricing is not stated as a static value on this page because quotations and inventory conditions change by quantity and date. Submit the exact MPN through the Request a Quote form on this page to obtain a current unit-price schedule, quantity breaks, packaging details, and availability confirmation for your order.
Is AD9852AST in stock?
AD9852AST stock status and production lead time should be confirmed through the Request a Quote form on this page for the required quantity and package format. Analog Devices identifies the AD9852 as a production CMOS device, but that lifecycle statement does not guarantee immediate allocation, date codes, or every package variant. Include your required delivery date in the request.
What can replace AD9852AST?
The AD9854AST is the confirmed pin-compatible replacement for the AD9852AST because Analog Devices states that the two devices are pin-for-pin compatible and both use the 80-lead LQFP package. No other verified, same-footprint cross-brand replacement is established here. Treat the AD9854AST as the leading option and review interface, modulation, DAC-output, and timing differences before production release.

داتای سەرچاوەی ئەندازیاری بۆ AD9852AST — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the AD9852AST when maintaining an AD9852-based design, preserving its characterized DDS behavior, or avoiding changes to control code and board layout is the priority. It combines a 300 MSPS internal clock, 48-bit tuning word, and 12-bit current-output DAC, with approximately 10 mA nominal output current identified as the best-SFDR operating point. Choose the AD9854AST when the manufacturer-confirmed pin-for-pin compatibility and shared 80-LQFP footprint allow the AD9854 single-tone synthesizer implementation to satisfy the design. A direct replacement still requires review of modulation, interface timing, DAC-output, reset, and reference-clock requirements. No equally verified cross-brand, same-footprint drop-in alternative is established for this package, so a different DDS family should not be treated as drop-in without a complete footprint, pinout, and electrical review.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AD9854AST
Package 80-LQFP (14x14) 80-LQFP (14x14)
Brand Analog Devices Analog Devices
Architecture Complete DDS Single-tone synthesizer

جیاکەرەوە سەرەکییەکان

  • Established AD9852-family synthesis architecture (بەراورد بەAD9854AST)
  • Explicit manufacturer-confirmed pin compatibility (بەراورد بەAD9854AST)
  • Documented best-SFDR operating current (بەراورد بەAD9854AST)

تێبینییەکانی دیزاین

Treat the current-output DAC and reconstruction network as one high-accuracy signal chain. The AD9852AST has a maximum output current of 20 mA, but approximately 10 mA nominal current provides the best SFDR. Select RSET from RSET = 39.93/IOUT with IOUT in amperes, keep the resistor close to the device, and design the output-bias network so normal signal excursions remain within the -0.5 V to +1 V compliance range.

Route the reference clock, digital control signals, analog output, and ground return paths with attention to their different noise sensitivities. Keep the RSET connection short, minimize copper around sensitive analog nodes, and provide a low-impedance ground plane. The 80-lead LQFP land pattern and exposed-paddle thermal requirement must be taken directly from the Analog Devices package drawing rather than inferred from the generic package dimensions.

The 80-lead LQFP package requires its exposed thermal pad to be soldered to the board for heat removal, as directed by the Analog Devices package guidance. Use the recommended exposed-pad geometry and thermal-via arrangement from the data sheet. Validate the final thermal design at the highest expected clock rate, output current, and ambient temperature because power dissipated by the internal DAC and digital circuitry varies with operating conditions.

Do not assume that physical pin compatibility guarantees identical behavior when moving from AD9852AST to AD9854AST. Although Analog Devices states that the AD9854 is pin-for-pin compatible with the AD9852, the family-specific single-tone implementation can change modulation and functional expectations. Check interface timing, reset behavior, DAC characteristics, reference-clock requirements, and board-level sequence before approving the substitution.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The Analog Devices AD9852 product page and Rev. F data sheet identify production status and device specifications but do not establish the requested compliance fields in the available records.

داتا پشتڕاستکراوەتەوە لە: 2026-11-15 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

AD9852AST datasheet AD9852AST datasheet pdf AD9852AST pinout AD9852AST specifications AD9852AST equivalent AD9852AST replacement AD9852AST cross reference AD9852AST vs AD9854AST AD9852AST 80-LQFP footprint Analog Devices AD9852AST AD9852AST price AD9852AST stock AD9852AST application circuit AD9852AST 300 MSPS DDS

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD9852AST AD9854AST direct digital synthesis DDS synthesizer frequency synthesizer phase accumulator frequency-to-phase converter digital-to-analog converter 12-bit DAC 48-bit tuning word 300 MSPS current-output DAC spurious-free dynamic range reconstruction filter RSET resistor 80-lead LQFP 3.3 V CMOS industrial instrumentation communications test equipment programmable signal generation modulation system Analog Devices AD9852 data sheet Rev. F
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ