AD9852AST - 12-Bit 300 MSPS DDS Synthesizer | Analog Devices
부품 번호: AD9852AST ✓ 활성AD9852AST 개요
A DDS is a digital frequency synthesizer that generates a periodic output waveform from a phase accumulator and lookup table. Unlike a conventional analog-tuned oscillator, its frequency, phase, and modulation characteristics are controlled through a digital interface. The AD9852 applies this architecture to create an agile single-tone or modulation-capable output while retaining deterministic frequency programming and phase control.
The principal features include a 300 MSPS internal clock rate, a 12-bit DAC, and a 48-bit tuning word for frequency resolution. The current-output DAC can produce up to 20 mA, while approximately 10 mA nominal output current provides the best spurious-free dynamic range. Output compliance is limited to -0.5 V to +1 V, making output-biasing and external analog filtering important parts of the implementation.
Technically, the AD9852 combines digital synthesis and high-performance conversion in one CMOS device. Its phase accumulator determines the digital phase presented to the conversion path, while the internal DAC converts the calculated waveform into current. The external RSET resistor controls the full-scale DAC current according to the stated relationship RSET = 39.93/IOUT, with IOUT expressed in amperes. This integration reduces the number of external high-speed components required for a programmable source.
Typical applications include communications test equipment, frequency-agile signal generation, clock synthesis, modulation systems, industrial instrumentation, and laboratory signal sources. Its extended industrial temperature range of -40°C to +85°C also supports equipment designed for controlled industrial environments. The internal DAC output is normally followed by reconstruction filtering when a clean sinusoidal waveform is required.
Design should account for the DAC output-current limit, -0.5 V to +1 V compliance range, reference accuracy, and the package thermal requirements. Keep the analog output path short, place the RSET resistor close to the device, and design the reconstruction filter for the operating range. The Analog Devices AD9852 data sheet, Rev. F, is the controlling document for connection, timing, and electrical-limit details.
This product record combines the verified manufacturer specifications, exact package information, source-document links, commercial contact workflow, and engineering-oriented application guidance. It also identifies the confirmed pin-compatible family relationship while clearly separating direct replacement options from parts that require a different footprint.
드롭인 대체품: AD9852AST — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD9852AST (동일 폼 팩터 및 풋프린트) — 차이점: Package.
AD9854AST
✅ 드롭인가격 문의
데이터시트 보기 →AD9852AST 사양
| Synthesizer Architecture | Complete direct digital synthesis |
| Maximum Internal Clock Rate | 300 MSPS |
| DAC Resolution | 12 bits |
| Tuning Word Width | 48 bits |
| Maximum DAC Output Current | 20 mA |
| Nominal DAC Output Current for Best SFDR | 10 mA |
| DAC Output Compliance Voltage | -0.5 V to +1 V |
| RSET Relationship | 39.93/IOUT, with IOUT in amperes |
| 공급 전압 | 3.3 V |
| 동작 온도 범위 | -40°C to +85°C |
| 패키지 | 80-lead LQFP |
| Package Body Size | 14 mm × 14 mm |
| Lead Pitch | 0.65 mm |
| Process Technology | CMOS |
| 출력 유형 | Current-output DAC |
| Production Status | Production CMOS |
AD9852AST 14 mm × 14 mm 핀 구성 가이드
AD9852AST(14 mm × 14 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: AD9852AST.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD9852AST 적합 용도: 6 애플리케이션s: Communications Test Equipment, Programmable Signal Generators, Clock Synthesis, Industrial Instrumentation, Modulation Systems, RF and Microwave Test Subsystems.
Communications Test Equipment
The AD9852AST fits communications test equipment that requires a digitally programmable source with precise frequency resolution. Its 48-bit tuning word provides fine frequency control, while the 300 MSPS internal clock and 12-bit DAC support a directly synthesized output. A designer can use the device as the central signal source in modulation and channel-test systems, then add a reconstruction filter after the current-output DAC. The key implementation constraint is the -0.5 V to +1 V output compliance range; biasing and filtering must preserve linear operation at the selected output current.
Programmable Signal Generators
The AD9852AST is appropriate for programmable laboratory and industrial signal generators because frequency is digitally set through the DDS tuning word rather than mechanically tuned. Its 300 MSPS architecture, 48-bit tuning word, and integrated 12-bit DAC combine phase accumulation and waveform conversion in one device. In a signal-generator design, the IC can produce the core tone while external circuitry performs amplitude conditioning and reconstruction filtering. Approximately 10 mA nominal DAC current provides the best stated SFDR, so the output network should be designed around that operating point rather than the 20 mA absolute maximum.
Clock Synthesis
The AD9852AST can serve as a programmable clock-generation element in equipment requiring digitally controlled output frequency. Its complete DDS architecture replaces a conventional frequency-setting loop with a phase accumulator and 48-bit tuning word, allowing the output frequency to be changed through its digital control path. The 3.3 V CMOS device supports integration into compact instrumentation, while the internal 12-bit DAC avoids a separate converter for basic waveform generation. Designers must still account for reference-clock jitter, output reconstruction filtering, DAC compliance, and the relationship between output current and SFDR when constructing a low-jitter clock path.
Industrial Instrumentation
The AD9852AST fits industrial instrumentation that needs a compact, digitally controlled excitation or reference source. Its -40°C to +85°C specified operating range supports controlled industrial environments, while the integrated DAC reduces the component count compared with a separate DDS controller and converter. The device can generate a programmable tone for measurement, simulation, or actuator-testing systems. Good results depend on a stable reference clock, correctly calculated RSET value, and an analog output network that respects the -0.5 V to +1 V compliance limits while preserving the desired spectral performance.
Modulation Systems
The AD9852AST is well matched to modulation systems because direct digital synthesis permits programmable phase and frequency behavior within a 48-bit tuning architecture. The 300 MSPS clock rate and integrated 12-bit DAC allow the synthesizer to generate a base waveform while the surrounding circuit applies required modulation. In implementation, keep the digital-control path isolated from the sensitive current-output stage and provide a suitable reconstruction network. The stated best-SFDR operating point is approximately 10 mA, so selecting the RSET value to reach that current is an important precursor to filtering and modulation-quality measurements.
RF and Microwave Test Subsystems
The AD9852AST can act as the programmable signal source within RF and microwave test subsystems that require agile tone generation. The 48-bit tuning word supports precise digital frequency setting, and the internal 12-bit current-output DAC simplifies the source architecture. An RF-focused design would use the AD9852 output to drive a suitable analog or upconversion stage rather than treating the DAC as a direct RF output. Interface timing, reference-clock quality, output compliance, and reconstruction filtering determine the achievable signal integrity, so those elements must be evaluated as one signal chain.
엔지니어링 참조 데이터: AD9852AST — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD9854AST |
|---|---|---|
| Package | 80-LQFP (14x14) | 80-LQFP (14x14) |
| Brand | Analog Devices | Analog Devices |
| Architecture | Complete DDS | Single-tone synthesizer |
주요 차별점
- Established AD9852-family synthesis architecture (vs AD9854AST)
- Explicit manufacturer-confirmed pin compatibility (vs AD9854AST)
- Documented best-SFDR operating current (vs AD9854AST)
설계 노트
Treat the current-output DAC and reconstruction network as one high-accuracy signal chain. The AD9852AST has a maximum output current of 20 mA, but approximately 10 mA nominal current provides the best SFDR. Select RSET from RSET = 39.93/IOUT with IOUT in amperes, keep the resistor close to the device, and design the output-bias network so normal signal excursions remain within the -0.5 V to +1 V compliance range.
Route the reference clock, digital control signals, analog output, and ground return paths with attention to their different noise sensitivities. Keep the RSET connection short, minimize copper around sensitive analog nodes, and provide a low-impedance ground plane. The 80-lead LQFP land pattern and exposed-paddle thermal requirement must be taken directly from the Analog Devices package drawing rather than inferred from the generic package dimensions.
The 80-lead LQFP package requires its exposed thermal pad to be soldered to the board for heat removal, as directed by the Analog Devices package guidance. Use the recommended exposed-pad geometry and thermal-via arrangement from the data sheet. Validate the final thermal design at the highest expected clock rate, output current, and ambient temperature because power dissipated by the internal DAC and digital circuitry varies with operating conditions.
Do not assume that physical pin compatibility guarantees identical behavior when moving from AD9852AST to AD9854AST. Although Analog Devices states that the AD9854 is pin-for-pin compatible with the AD9852, the family-specific single-tone implementation can change modulation and functional expectations. Check interface timing, reset behavior, DAC characteristics, reference-clock requirements, and board-level sequence before approving the substitution.
규정 준수 정보
The Analog Devices AD9852 product page and Rev. F data sheet identify production status and device specifications but do not establish the requested compliance fields in the available records.