Analog Devices

ADF4217LBRU - Dual RF/IF Integer-N PLL | Analog Devices

MPN: ADF4217LBRU ✗ کۆتایی ژیان
3 V Vdss 10 mA Id TSSOP Package Low-noise digital phase-frequency detector Speed
MOQ: 1 |

ADF4217LBRU گشتی

The Analog Devices ADF4217LBRU is a low-power dual RF/IF integer-N phase-locked loop frequency synthesizer with a 3 V nominal supply, a maximum supply current of 10 mA, and a 20-terminal TSSOP surface-mount package. It can generate local-oscillator signals for the RF and intermediate-frequency sections of wireless receivers and transmitters. Its industrial temperature range extends from -40 °C to +85 °C.

An integer-N PLL is a frequency synthesizer that uses feedback from a programmable divider to lock an output frequency to a stable reference. The phase-frequency detector compares the divided feedback signal with the reference, while the charge pump drives the loop filter and voltage-controlled oscillator. The resulting architecture provides programmable frequency synthesis with phase and frequency regulation controlled by the external loop-filter components.

The ADF4217 family combines a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, and programmable RF and IF output paths. These functions support dual-channel local-oscillator architectures, allowing one synthesizer to serve both RF and IF sections. The low 3 V nominal operating supply also makes the device suitable for compact, power-conscious RF and communication equipment.

As an integer-N synthesizer, the device divides its internal oscillator frequency by an integer value derived from the programmed RF or IF output path. The programmed output therefore remains locked to the external reference frequency multiplied by the applicable integer division ratio. Designers must select reference, divider, charge-pump-current, and loop-filter values with sufficient phase margin for the intended channel spacing and tuning bandwidth.

Typical uses include wireless receiver and transmitter local oscillators, RF up-converters and down-converters, IF-generation stages, industrial RF links, test and measurement equipment, and communication hardware. The dual RF/IF architecture is especially useful when both sections require coherent signals derived from one reference source.

A key implementation consideration is the loop filter. Its resistance and capacitance set loop bandwidth, damping, reference-spur behavior, and phase margin. Place the loop-filter components close to the relevant device pins, maintain a continuous ground return, and follow the pin-description and reference-layout tables in the Analog Devices ADF4217L data sheet when assigning PCB traces.

This product page combines the manufacturer’s device description with practical selection guidance, application analysis, lifecycle information, and verified source links. It also distinguishes the confirmed TSSOP ordering code from package or temperature variants that require separate qualification before being treated as interchangeable replacements.

جێگرەوەکانی جێگۆڕکێ بۆ ADF4217LBRU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ADF4217LBRU تایبەتمەندییەکان

Product Type Dual RF/IF integer-N PLL frequency synthesizer
Nominal Supply Voltage 3 V
Maximum Supply Current 10 mA
مەودای پلەی گەرمیی کارکردن -40 °C to +85 °C
Temperature Grade Industrial
Number of Terminals 20 terminals
Package Code TSSOP
Package Shape Rectangular
جۆری دامەزراندن Surface mount
Architecture Integer-N PLL
Synthesizer Channels 2 RF/IF channels
Phase-Frequency Detector Low-noise digital phase-frequency detector
Charge Pump Precision charge pump
Reference Divider Programmable

ڕێنمایی ڕێکخستنی پینی ADF4217LBRU rectangular

ڕێکخستنی پین بۆ ADF4217LBRU (پاکێجی rectangular). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی rectangular بۆ ADF4217LBRU

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADF4217LBRU.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADF4217LBRU گونجاوە بۆ 6 بەکارھێنانs: Wireless Receiver RF Local Oscillator, Wireless Transmitter IF Generation, RF Up-Converter and Down-Converter, Industrial RF Communication Link, RF Test and Measurement Equipment, Legacy Communication Hardware Maintenance.

🌐

Wireless Receiver RF Local Oscillator

The ADF4217LBRU fits a receiver RF local-oscillator function where a programmable integer-N PLL must translate a stable reference into the mixing frequency required by the selected channel. Its low 3 V nominal supply and maximum 10 mA supply current reduce the power budget in compact RF front ends. The engineer programs the applicable RF divider and reference ratio, then designs the external loop filter around the required channel spacing, phase noise, lock-time behavior, and tuning range. Because the device is obsolete, a receiver built around it is generally a maintenance or lifecycle-extension design rather than a new platform choice. Verify the supported RF output range and register map in the ADF4217L data sheet before releasing the schematic or board layout.

📡

Wireless Transmitter IF Generation

The ADF4217LBRU can support IF-generation requirements in a wireless transmitter because its dual RF/IF architecture is intended to provide coherent local-oscillator paths for RF and IF sections. Using one PLL device for related RF and IF functions can simplify frequency coordination and reference distribution, although each output path still requires correct programming and loop-filter design. The 3 V nominal operation is appropriate for compact radio equipment where supply current and board area are constrained. An engineer should establish the required IF frequency, allowed reference ratios, lock-time target, and spur limits before selecting component values. The obsolete lifecycle status makes supply-chain validation and long-term procurement planning essential for transmitter programs that remain in production.

🌐

RF Up-Converter and Down-Converter

The ADF4217LBRU is applicable to RF and IF conversion architectures because it is explicitly intended to generate local-oscillator signals for up-conversion and down-conversion sections. The programmable divider, low-noise digital phase-frequency detector, and precision charge pump provide the core frequency-generation functions needed by a PLL-based converter. Engineers must calculate each integer division ratio from the reference and desired local-oscillator frequencies, then optimize the loop filter for phase margin and channel spacing. Board placement is also critical because the reference, charge-pump, and sensitive RF paths must not share noisy return-current geometry. For new converter platforms, compare the obsolete ADF4217L with currently supported synthesizers; for existing equipment, its original register compatibility and TSSOP footprint simplify lifecycle-extension work.

🏭

Industrial RF Communication Link

The ADF4217LBRU can support an industrial RF communications link that requires stable local-oscillator generation from a common reference. Its industrial operating range of -40 °C to +85 °C is suitable for temperature-controlled industrial equipment, and the low-power architecture fits compact transceivers and monitoring systems. The design must account for reference drift, temperature-dependent loop behavior, phase-noise requirements, and the allowed output frequency plan. The external loop filter is the principal tuning element for lock time and damping, so its component tolerances should be included in worst-case analysis. For sustaining an installed link, request lifecycle and supply information through the Request a Quote form and ensure any replacement preserves the 20-terminal TSSOP pinout, register behavior, and electrical characteristics.

📺

RF Test and Measurement Equipment

The ADF4217LBRU is appropriate for legacy RF test equipment that needs programmable local-oscillator generation for heterodyne measurements. Its dual RF/IF architecture can support coherent source generation, while integer-N operation provides direct relationship between the reference and programmed output. Instrument designers must evaluate lock-time, phase noise, spurious-signal behavior, and amplitude accuracy because those specifications determine measurement uncertainty and adjacent-channel performance. A stable, low-noise reference and a carefully designed external loop filter are central to achieving repeatable results across temperature and supply conditions. The 3 V nominal operating point and 10 mA maximum supply current support compact instrument architectures. Since the device is obsolete, equipment extensions should preserve the original interface and verify long-term component availability before production release.

🔧

Legacy Communication Hardware Maintenance

The ADF4217LBRU is well suited to maintaining communication hardware already designed around its 20-terminal TSSOP footprint, register interface, and 3 V supply architecture. Pin-compatible continuity reduces board modification risk during repair, qualification, or end-of-life extension, provided the incoming part has traceable markings and meets the original electrical requirements. The engineer should compare the replacement specification, pin description, register behavior, operating-temperature grade, and package dimensions against the installed design rather than relying only on the family name. Obsolete timing ICs can create counterfeit or mixed-source risks, so procurement should include date-code, visual-inspection, traceability, and electrical-test requirements. Use the Request a Quote form to define those commercial conditions and the associated lifecycle plan for the complete communications assembly.

کورتەی بەرهەمە پێشنیارکراوەکان

ADF4216 Related dual frequency synthesizer family member بەکارهێنراوە لە: Wireless Receiver RF Local Oscillator, Wireless Transmitter IF Generation, RF Up-Converter and Down-Converter, Industrial RF Communication Link, RF Test and Measurement Equipment, Legacy Communication Hardware Maintenance ADF4218 Related dual frequency synthesizer family member بەکارهێنراوە لە: Wireless Receiver RF Local Oscillator, Wireless Transmitter IF Generation, RF Up-Converter and Down-Converter, Industrial RF Communication Link, RF Test and Measurement Equipment ADF4217L Low-power ADF4217 family device بەکارهێنراوە لە: Wireless Receiver RF Local Oscillator, RF Up-Converter and Down-Converter, Legacy Communication Hardware Maintenance ADF4217 Related ADF4217 dual frequency synthesizer بەکارهێنراوە لە: Wireless Transmitter IF Generation, Industrial RF Communication Link, RF Test and Measurement Equipment, Legacy Communication Hardware Maintenance
What is the ADF4217LBRU?
The ADF4217LBRU is a low-power, dual RF/IF integer-N PLL frequency synthesizer from Analog Devices in a 20-terminal TSSOP package. According to the ADF4217L manufacturer product page, the device can supply local-oscillator signals for RF and IF sections in wireless receivers and transmitters, while its 3 V nominal supply and 10 mA maximum supply current suit compact communication equipment.
What are the key specifications of ADF4217LBRU that engineers should know?
The key ADF4217LBRU specifications are a 3 V nominal supply, no more than 10 mA supply current, a -40 °C to +85 °C industrial operating range, and a 20-terminal TSSOP package. The device is a dual RF/IF integer-N PLL incorporating a low-noise digital phase-frequency detector, a precision charge pump, and a programmable reference divider. Its obsolete lifecycle status should be considered during new-design planning.
Where can I download the ADF4217LBRU datasheet PDF?
The official ADF4217L product page is the correct starting point for the ADF4217LBRU datasheet and product documentation. It identifies the device as a low-power dual RF/IF integer-N PLL and links to its data sheet. Use the pin-description table, electrical characteristics, register descriptions, and reference-layout information in that document before creating or revising a PCB.
Where can I find the ADF4217LBRU pinout?
The ADF4217LBRU pinout is documented in the Analog Devices ADF4217L data sheet because the device is supplied in a 20-terminal TSSOP package. Use the pin-description table to identify power, ground, reference, control, data, charge-pump, and synthesizer connections. Do not infer pin functions from the ADF4217, ADF4216, or ADF4218 family names without checking the specific ordering code and package drawing.
Is ADF4217LBRU suitable for RF and IF local oscillators?
Yes, ADF4217LBRU is designed for RF and IF local-oscillator generation in wireless receivers and transmitters. Its dual RF/IF architecture can provide both local-oscillator paths from a coherent frequency-synthesis arrangement. Suitability for a particular channel plan still depends on the supported tuning range, reference frequency, divider settings, phase-noise requirements, and loop-filter design.
How does an integer-N PLL generate its output frequency?
An integer-N PLL locks a voltage-controlled oscillator to a stable reference through an integer feedback divider. The phase-frequency detector compares the divided signal with the reference, and the charge pump drives an external loop filter that controls the oscillator. Because the feedback division ratio is an integer, the synthesized frequency is related directly to the reference by the programmed integer ratio.
What is the difference between the ADF4217L and ADF4217?
The ADF4217L is identified by Analog Devices as the low-power dual RF/IF integer-N PLL version, while the broader ADF4217 family description covers the ADF4216, ADF4217, and ADF4218 dual synthesizers. The L designation is not itself a package or temperature substitution rule. Verify the complete ordering code, package, supply limits, register behavior, and operating-temperature requirements before treating any family member as a replacement.
What can replace ADF4217LBRU?
No verified pin-compatible drop-in replacement for ADF4217LBRU was identified from the available cross-reference results. A valid replacement must match the 20-terminal TSSOP footprint, pin functions, RF and IF frequency ranges, reference requirements, register interface, charge-pump behavior, and electrical limits. Request a controlled review of any proposed substitute before committing it to a production PCB.
Is ADF4217LBRU the same as ADF4217LBRU?
The target ADF4217LBRU is an ordering code for the obsolete ADF4217L low-power dual RF/IF integer-N PLL in a 20-terminal TSSOP package. Its functional role is distinct from devices that merely use the shorter ADF4217 family name. Confirm the suffix, package dimensions, pin assignment, temperature grade, and ordering documentation when comparing an assembled board with a replacement proposal.
When should I choose ADF4217LBRU instead of another frequency synthesizer?
Choose ADF4217LBRU when a design specifically requires the documented low-power dual RF/IF integer-N PLL function, 3 V nominal operation, a 20-terminal TSSOP footprint, and compatibility with its register set. It is appropriate for legacy receiver and transmitter local-oscillator designs in the industrial temperature range. New designs should also weigh its obsolete lifecycle status against currently supported timing and RF synthesis devices.
Is ADF4217LBRU in stock?
Current stock status for ADF4217LBRU must be checked through the Request a Quote form on this page because the device is marked obsolete by Analog Devices and its availability can change. Include the exact 20-terminal TSSOP ordering code, target quantity, date code requirements, and inspection requirements in the request. Do not substitute a different suffix or package without an engineering review.
Where can I buy ADF4217LBRU online?
Use the Request a Quote form on this page to request ADF4217LBRU availability and a commercial quotation. The request should identify the exact MPN, quantity, tube packaging requirement, and any date-code or traceability constraints. Because the ADF4217L is obsolete, confirm lifecycle, manufacturing source, and delivered part markings before authorizing procurement.
What is the price of ADF4217LBRU?
The current commercial quotation for ADF4217LBRU is provided through the Request a Quote form on this page. The quotation should reflect the exact 20-terminal TSSOP ordering code, requested quantity, packaging format, and any traceability requirements. Because this product is obsolete and no explicit quantity-break price is established on this page, use the form for current transactional information.
What is the lead time for ADF4217LBRU?
The current lead time for ADF4217LBRU must be confirmed through the Request a Quote form on this page. Include the required quantity, acceptable tube packaging, date-code window, and inspection level in the request. Obsolete timing ICs may require an authorized manufacturing or distribution channel, so confirm supply provenance before committing a production schedule.
What design factors matter when using ADF4217LBRU in an RF synthesizer?
The most important design factors are reference stability, divider programming, loop-filter selection, charge-pump settings, phase margin, output spur behavior, and board layout. The external loop filter determines loop bandwidth and damping, while continuous ground return and compact routing help control phase noise and unwanted coupling. Use the manufacturer’s application guidance and pin-description table when defining component values and trace routing.
Does ADF4217LBRU meet automotive or environmental qualification requirements?
The ADF4217LBRU is described as an industrial-temperature device operating from -40 °C to +85 °C, but the confirmed product information does not establish AEC-Q100 qualification. Automotive production use therefore requires formal review of qualification, reliability, traceability, and change-control requirements. Request supporting quality documentation through the Request a Quote process and do not infer automotive approval from the industrial temperature grade.

داتای سەرچاوەی ئەندازیاری بۆ ADF4217LBRU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADF4217LBRU when maintaining or extending a design that already depends on its documented low-power dual RF/IF integer-N PLL function, 3 V nominal supply, industrial temperature range, register interface, and 20-terminal TSSOP footprint. Its maximum supply current of 10 mA is useful in compact RF equipment, while the dual architecture supports coherent local-oscillator generation for receiver and transmitter RF and IF sections. Do not choose it casually for a new design because Analog Devices marks the ADF4217L as obsolete. If a replacement is unavoidable, it must match the package, pins, electrical limits, frequency ranges, control interface, and system-level synthesizer behavior. ADF4216, ADF4217, and ADF4218 are related family members, but family membership alone does not establish drop-in compatibility. For new platforms, compare currently supported clock-generation and RF-synthesis options against the original design’s phase noise, spur, lock-time, reference, and power requirements.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Product Type Dual RF/IF integer-N PLL frequency synthesizer
Brand Analog Devices
Package 20-terminal TSSOP
Nominal Supply Voltage 3 V
Maximum Supply Current 10 mA
Operating Temperature Range -40 °C to +85 °C
Temperature Grade Industrial
Lifecycle Status Obsolete

جیاکەرەوە سەرەکییەکان

  • Purpose-built dual RF and IF synthesis architecture (بەراورد بەADF4217)
  • Industrial temperature operation (بەراورد بەADF4216)
  • Defined 20-terminal TSSOP mechanical format (بەراورد بەADF4218)

تێبینییەکانی دیزاین

Place the external loop-filter components close to the charge-pump and related synthesizer pins, following the Analog Devices ADF4217L reference-layout guidance. Keep the sensitive reference and feedback routes compact, avoid routing them beneath noisy digital or switching-supply sections, and provide a continuous ground plane beneath the device. A split or interrupted return path beneath the TSSOP can increase conversion error and degrade phase-noise behavior.

Design the loop filter from the required channel spacing, reference frequency, phase margin, lock time, and spur specifications rather than using a generic resistor-capacitor pair. Evaluate component tolerances and the intended reference phase noise because both can alter damping and reference-spur performance. Confirm the programmed integer ratios against the desired RF and IF output frequencies before finalizing the component values and control firmware.

Decouple the 3 V supply close to the device and provide a quiet return path for the charge pump and digital control signals. Separate or carefully isolate noisy regulator switching paths from the reference and synthesizer areas. Validate startup, lock behavior, and supply-current margin at the system level because the device’s stated maximum supply current is 10 mA and does not include the complete external circuit’s consumption.

Do not treat ADF4216, ADF4217, ADF4218, or different suffix codes as automatic drop-in replacements without checking their exact package drawings, pin assignments, frequency limits, and register definitions. The ADF4217LBRU is an obsolete 20-terminal TSSOP ordering code, so lifecycle continuity and incoming-part traceability are critical. A visual marking check alone is not a substitute for specification review and functional test.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The ADF4217L is documented as an industrial-temperature PLL operating from -40 °C to +85 °C. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation from the manufacturer’s quality documentation before use in regulated production.

داتا پشتڕاستکراوەتەوە لە: 2026-11-10 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADF4217LBRU ADF4217LBRU datasheet ADF4217LBRU datasheet pdf ADF4217LBRU pinout ADF4217LBRU equivalent ADF4217LBRU replacement ADF4217LBRU cross reference ADF4217LBRU price ADF4217LBRU stock Analog Devices ADF4217LBRU ADF4217LBRU TSSOP pinout ADF4217LBRU RF IF PLL

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADF4217LBRU ADF4217L ADF4217 ADF4216 ADF4218 integer-N PLL phase-locked loop frequency synthesizer clock and timing IC phase-frequency detector PFD charge pump programmable reference divider RF local oscillator IF local oscillator wireless receiver wireless transmitter loop filter 3 V supply TSSOP-20 surface-mount package industrial temperature grade obsolete product lifecycle
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ