Analog Devices

ADM3064EARZ - 500 kbps ESD-Protected RS-485 Transceiver | Analog Devices

MPN: ADM3064EARZ ✓ چالاک
3.0 V to 5.5 V Vdss 14-lead SOIC, 0.154 inch (3.90 mm) width Package 50 Mbps Speed
MOQ: 1 |

ADM3064EARZ گشتی

Analog Devices ADM3064EARZ is a half-duplex RS-485 transceiver operating from a 3.0 V to 5.5 V supply, supporting 500 kbps operation and up to 50 Mbps in the high-speed mode identified for the ADM3064E series. It provides one driver and one receiver, ±12 kV IEC ESD protection, and is housed in a 14-lead SOIC package. The device is intended for industrial data links that require robust line-driver performance and integrated electrostatic-discharge protection.

An RS-485 transceiver is an interface IC that combines a differential line driver, differential receiver, and electrical protection into the physical layer of a multipoint communications bus. Its hierarchy is RS-485 interface transceiver → bus-line transceiver → interface IC → semiconductor. Differential signaling improves noise immunity by transmitting the same signal as complementary voltages and rejecting common-mode noise encountered in industrial environments.

The ADM3064EARZ combines a 3.0 V to 5.5 V operating range with 500 kbps signaling and ±12 kV IEC ESD protection. The 14-lead SOIC package is widely supported by automated assembly and board-layout practices. Its half-duplex architecture allows the same differential pair to support transmitting and receiving when the bus direction is controlled externally. The reported 800 ns maximum transmit delay supports deterministic communication designs operating at the stated 500 kbps class.

The ADM3064E family is designed around a single RS-485 transceiver rather than a multi-channel interface. During transmission, the driver places a differential voltage onto the bus; during reception, the receiver converts the differential bus voltage into a logic signal. A direction-control circuit determines which function is active. The manufacturer evaluation platform EVAL-ADM3064EEBZ uses the same standard 14-lead SOIC footprint and allows the driver and receiver functions to be exercised without external components.

Typical uses include industrial instrumentation, factory automation, building controls, communications equipment, and long-reach RS-485 networks. The 500 kbps rate is appropriate for supervisory links, configuration buses, sensor aggregation, and equipment-to-equipment communication. At lower signaling rates, the same transceiver can serve longer cable runs, although cable length, topology, termination, and data rate must be considered together.

Board design should preserve the transceiver's common-mode operating range and route the differential pair as a controlled impedance pair. Place termination, biasing, protection, and decoupling components close to their associated pins. Avoid long unprotected stubs, maintain consistent return paths, and apply the manufacturer's recommended supply and ground layout. In noise-heavy installations, verify both conducted and radiated immunity rather than relying on ESD protection alone.

This page combines the manufacturer's ADM3064E product information with package, interface, and ordering details for faster component selection. It also provides application guidance, drop-in alternatives, and practical bus-layout considerations that help engineers connect the ADM3064EARZ specifications to a complete RS-485 interface design.

جێگرەوەکانی جێگۆڕکێ بۆ ADM3064EARZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADM3064EARZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Interface Standard, Operating Temperature Range, Product Type, RoHS Status.

Analog Devices
Package: 14-lead SOIC_N
Interface Standard: TIA/EIA RS-485
Operating Temperature Range: -40°C to +85°C or -40°C to +125°C, model-dependent
بەراوردکردن لەگەڵ ADM3064EARZ →
Analog Devices
Package: 14-lead narrow-body SOIC
Product Type: RS-485 transceiver
بەراوردکردن لەگەڵ ADM3064EARZ →

ADM3064EBRZ

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 14-lead SOIC
RS-485 transceiver · 1 channel · 500 kbps · 50 Mbps · 3.0 V to 5.5 V · 1.62 V to 5.5 V · ±12 kV · IEC 61000-4-2

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADM3061EARZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Analog Devices
📦 14-lead SOIC
Half-duplex RS-485 transceiver · 3.0 V to 5.5 V · 500 kbps · ±12 kV IEC · Half duplex · RS-485 · 8-lead SOIC · 8 leads

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADM3062EARZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 14-lead SOIC
Same-brand ADM306x family with a 14-lead SOIC footprint; receiver and timing characteristics may differ from ADM3064EARZ

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM3063EARZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Analog Devices
📦 14-lead SOIC
Full-duplex RS-485 transceiver · 500 kbps · 3.0 V to 5.5 V · 1.62 V to 5.5 V · TIA/EIA RS-485 · Full duplex · At least ±12 kV per IEC 61000-4-2 · At least ±12 kV per IEC 61000-4-2

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADM3064ERUZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 14-lead SOIC
Same ADM3064E electrical family in 14-lead SOIC; temperature-grade ordering distinction requires manufacturer confirmation

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM3064EARZ تایبەتمەندییەکان

Transceiver Configuration 1/1 transceiver
Interface Standard EIA-485 RS-485
Driver and Receiver Count 1 driver and 1 receiver
Supply Voltage Range 3.0 V to 5.5 V
Nominal Signaling Rate 500 kbps
High-Speed Mode 50 Mbps
ESD Protection ±12 kV IEC ESD protected
Maximum Transmit Delay 800 ns
مەودای پلەی گەرمیی کارکردن -40 °C to +85 °C
پاکێج 14-lead SOIC, 0.154 inch (3.90 mm) width
جۆری دامەزراندن Surface mount
Shipping Package Tube
Terminal Count 14 terminals
دۆخی RoHS Compliant
Evaluation Board Footprint Standard 14-lead SOIC footprint

ڕێنمایی ڕێکخستنی پینی ADM3064EARZ tube

ڕێکخستنی پین بۆ ADM3064EARZ (پاکێجی tube). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی tube بۆ ADM3064EARZ

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM3064EARZ.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADM3064EARZ گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Aggregation, Factory Automation Control Bus, Building Control Network, Instrumentation and Test Equipment, Telecommunications Power Monitoring, Data Acquisition Backplane.

🏭

Industrial Sensor Aggregation

The ADM3064EARZ fits industrial sensor-aggregation links that require one RS-485 driver and one receiver in a 14-lead SOIC package. Its 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V control systems, while the 500 kbps class provides ample bandwidth for periodic temperature, pressure, and level measurements. Place the transceiver between the controller and a twisted differential pair, use a local supply capacitor, and fit termination only at the physical ends of the bus. The ±12 kV IEC ESD rating strengthens the interface against electrostatic discharge, although surge protection and proper grounding remain necessary in severe industrial environments.

🏭

Factory Automation Control Bus

The ADM3064EARZ is appropriate for supervisory and control traffic on factory automation equipment where noise immunity and ESD robustness matter. The differential RS-485 interface reduces susceptibility to common-mode interference relative to a single-ended communications link, and the 500 kbps rate supports equipment status, commands, and diagnostic data. The device can operate from a 3.3 V controller rail or a 5 V industrial rail. Keep the differential trace pair tightly coupled, avoid branch stubs, and use the manufacturer's pin-description table when assigning direction-control, enable, ground, and bus connections.

🧩

Building Control Network

The ADM3064EARZ can connect controllers to distributed building equipment over an RS-485 bus. Its 3.0 V to 5.5 V operating range accommodates low-voltage control electronics, while 500 kbps operation is more than sufficient for HVAC status, lighting control, access equipment, and environmental monitoring. The single-driver, single-receiver arrangement supports half-duplex communication on a multidrop bus. Use consistent 120-ohm termination at selected physical endpoints, establish biasing for an idle network where required, and separate sensitive analog routing from the bus to reduce coupling into building-control measurements.

🔧

Instrumentation and Test Equipment

The ADM3064EARZ suits laboratory and industrial instrumentation that exchanges configuration and measurement data over RS-485. A 500 kbps link allows responsive command-and-response operation without occupying a high-speed differential pair such as USB or Ethernet. The 14-lead SOIC package is convenient for automated assembly, while the ±12 kV IEC ESD protection adds interface robustness in shared industrial cabinets. For sensitive measurements, place analog sections away from the transceiver and bus connector, use a continuous ground reference, and verify that isolation or shield arrangements do not compromise the intended common-mode range.

🌐

Telecommunications Power Monitoring

The ADM3064EARZ can support remote monitoring units that report power-system measurements over an RS-485 communications segment. Its 3.0 V to 5.5 V supply range supports embedded controller platforms, and the 500 kbps class provides sufficient throughput for periodic telemetry and control messages. The half-duplex topology limits physical bus complexity, while the integrated ESD protection helps the transceiver survive electrostatic events encountered during field servicing. Route the bus as a controlled-impedance differential pair, provide a low-impedance return path, and include appropriately coordinated surge protection when the installation is exposed to lightning or severe switching transients.

🖥️

Data Acquisition Backplane

The ADM3064EARZ is suitable for a data-acquisition backplane that connects one controller to remote analog and digital measurement modules. The 500 kbps rate supports frequent sampling telemetry when payload sizes remain moderate, and the one-driver, one-receiver architecture fits multidrop half-duplex wiring. Its 3.0 V to 5.5 V range allows placement near either 3.3 V or 5 V backplane electronics. Maintain a continuous reference plane under the pair, keep connectors and protection devices away from sensitive analog nodes, and verify cable length against the selected data rate to avoid signal-integrity degradation.

What is the operating voltage of ADM3064EARZ?
The ADM3064EARZ operates from 3.0 V to 5.5 V. This supply range allows use with common 3.3 V and 5 V industrial or embedded systems. According to the Analog Devices ADM3064E product information, the ADM3064EARZ is a 1/1 RS-485 transceiver with one driver and one receiver. Keep the supply within the stated limits and include local high-frequency decoupling to minimize supply noise on the differential bus.
What data rate does ADM3064EARZ support?
The ADM3064EARZ is identified as a 500 kbps RS-485 transceiver, while the ADM3064E family is also described as supporting a 50 Mbps high-speed mode. According to Analog Devices product information for the ADM3064E, these rates describe different operating modes and must be matched to the complete transceiver, protection network, and cable. The device also has a reported maximum transmit delay of 800 ns, a useful timing parameter for bus-direction and protocol design.
Where can I download the ADM3064EARZ datasheet PDF?
The official ADM3064E datasheet and product resources are available from Analog Devices through the ADM3064E product page at https://www.analog.com/en/products/ADM3064E.html. The page includes the manufacturer datasheet, evaluation-board information, and device documentation. Use the manufacturer copy for the complete pin-description table, absolute maximum ratings, timing characteristics, and recommended application circuit rather than relying on a distributor summary.
Where can I find the ADM3064EARZ pinout?
The ADM3064EARZ uses a 14-lead SOIC package, and its complete pin-description table is in the Analog Devices ADM3064E datasheet. The evaluation-board description confirms that the ADM3064E uses a standard 14-lead SOIC footprint. Assign supply, ground, driver, receiver, direction-control, and bus pins from that table when laying out the PCB, and preserve the exposed thermal and copper requirements of the chosen SOIC footprint.
What is the best drop-in replacement for ADM3064EARZ?
The closest identified same-brand option is the ADM3064EBRZ, which uses the same 14-lead SOIC package and belongs to the ADM3064E RS-485 transceiver family. Pin compatibility and every electrical limit should still be confirmed against the current Analog Devices datasheets before substitution. The ADM3064EARZ-R7 is a tape-and-reel ordering form of the same device rather than a functionally different replacement, so it does not add engineering value to a drop-in list.
What can replace ADM3064EARZ in an RS-485 design?
ADM3064EBRZ is the primary identified replacement candidate because it is an ADM3064E-family device in a 14-lead SOIC package. Other ADM306x family members can serve related RS-485 links, but they may differ in fail-safe behavior, receiver configuration, or operating mode, so they are not automatically interchangeable. Confirm pin functions, supply range, data rate, common-mode limits, direction-control logic, and bus protection before approving any replacement.
Is ADM3064EARZ suitable for industrial RS-485 networks?
The ADM3064EARZ is suitable for industrial RS-485 networks requiring a 3.0 V to 5.5 V transceiver, 500 kbps operation, and ±12 kV IEC ESD protection. Its specified operating range is -40 °C to +85 °C. The manufacturer also describes the EVAL-ADM3064EEBZ evaluation board for exercising the ADM3064E driver and receiver functions with a standard 14-lead SOIC footprint.
What is the difference between ADM3064EARZ and ADM3064EBRZ?
Both ADM3064EARZ and ADM3064EBRZ are associated with the ADM3064E RS-485 transceiver family and the 14-lead SOIC footprint. Published comparison listings identify both as surface-mount ADM3064E RS-485 interface devices, but the exact order-code temperature and qualification distinctions are not established in the available technical text. Review the current manufacturer ordering table and datasheet before using either order code as a drop-in replacement.
When should I choose ADM3064EARZ over ADM3064EBRZ?
Choose ADM3064EARZ when the original design has been validated around its specific ADM3064E order code, supply range, and temperature grade. Choose ADM3064EBRZ when its manufacturer ordering information confirms the required grade and the complete pin and electrical comparison passes. Both use the 14-lead SOIC format, but package identity alone does not establish that every limit, feature, and qualification requirement is interchangeable.
How much ESD protection does ADM3064EARZ provide?
The ADM3064EARZ provides ±12 kV IEC ESD protection, as stated for the ADM3064E RS-485 transceiver family. This rating protects the interface against electrostatic-discharge stress when the recommended connection and board-layout practices are followed. It does not eliminate the need for correct bus topology, controlled impedance, suitable grounding, and surge-protection components in installations exposed to lightning or large industrial transients.
What are the key specifications of ADM3064EARZ that engineers should know?
The principal ADM3064EARZ specifications are a 3.0 V to 5.5 V supply range, one driver and one receiver, 500 kbps nominal signaling, a listed 50 Mbps high-speed capability, ±12 kV IEC ESD protection, a -40 °C to +85 °C operating range, and a 14-lead SOIC package. The device is intended for half-duplex RS-485 links and is available with an evaluation board using the same 14-lead footprint.
Where can I buy ADM3064EARZ online and what is its price?
Use the Request a Quote form on this page to request current ADM3064EARZ pricing, stock, minimum order quantity, and lead time. Quote requests can also confirm the required tube or reel ordering form and shipping destination. Current commercial terms can vary with quantity and supply conditions, so a direct quote is more reliable than a static price reference for production planning.
Is ADM3064EARZ in stock and what is its lead time?
Current inventory and lead time for ADM3064EARZ should be confirmed through the Request a Quote form on this page. Submit the required quantity, package form, destination, and target production date so the order can be matched to available supply. The manufacturer information identifies the device as a 14-lead SOIC RS-485 transceiver, while current commercial availability remains subject to purchasing-channel and order-volume conditions.
Can ADM3064EARZ be used with 3.3 V microcontrollers?
The ADM3064EARZ can be paired with a 3.3 V system because its specified supply range is 3.0 V to 5.5 V. The digital interface must still meet the device's input and output logic thresholds, and direction control should be sequenced to avoid bus contention. Confirm the exact logic levels and timing characteristics in the ADM3064E datasheet for the selected microcontroller and system operating conditions.
Is ADM3064EARZ the same as ADM3064EBRZ?
The ADM3064EARZ and ADM3064EBRZ are closely related ADM3064E-family RS-485 transceivers in 14-lead SOIC packages, but they are not automatically identical order codes. Their family membership and package format are established, while the available comparison excerpts do not fully specify every temperature-grade or qualification difference. Use the Analog Devices ordering table and datasheet to confirm exact interchangeability for production use.

داتای سەرچاوەی ئەندازیاری بۆ ADM3064EARZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADM3064EARZ for a half-duplex industrial RS-485 link that operates from 3.0 V to 5.5 V, operates in the 500 kbps class, and requires ±12 kV IEC ESD protection in a 14-lead SOIC footprint. ADM3064EBRZ is the closest same-family candidate for a footprint-preserving redesign, provided its exact temperature-grade, qualification, and ordering differences are confirmed. ADM3061EARZ, ADM3062EARZ, and ADM3063EARZ are same-brand family candidates for engineering review when their receiver, fail-safe, and direction-control characteristics match the system. They should not replace the target solely because they use a 14-lead SOIC package. Use the manufacturer pin-description table, absolute maximum ratings, timing data, and application circuit to approve any substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADM3064EBRZ ADM3061EARZ ADM3062EARZ ADM3063EARZ ADM3064ERUZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-lead SOIC 14-lead SOIC 14-lead SOIC 14-lead SOIC 14-lead SOIC 14-lead SOIC
Interface Type RS-485 RS-485 RS-485 RS-485 RS-485 RS-485
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

جیاکەرەوە سەرەکییەکان

  • Combines a 500 kbps RS-485 interface with high-level ESD protection (بەراورد بەADM3061EARZ)
  • Uses a broadly deployable 14-lead SOIC footprint (بەراورد بەADM3062EARZ)
  • Supports 3.0 V to 5.5 V operation with a reported 800 ns maximum transmit delay (بەراورد بەADM3063EARZ)
  • Provides a direct same-family order-code path within the ADM3064E family (بەراورد بەADM3064EBRZ)

تێبینییەکانی دیزاین

Route the RS-485 driver and receiver connections as a tightly coupled differential pair over a continuous reference plane. Avoid adding test-point branches or unused stubs because they create impedance discontinuities and reflections. Keep the pair away from switching-converter inductors, high-current return paths, and crystal clocks. Use symmetrical components for differential filtering or protection so that common-mode conversion does not degrade the received signal.

Do not treat ±12 kV IEC ESD protection as a substitute for surge protection or a complete industrial protection network. The ADM3064EARZ should be used with correct bus topology, suitable cable, controlled grounding, and coordinated protection. Avoid placing termination resistors indiscriminately at every node; termination belongs at the physical ends of the bus. Confirm the fail-safe state and biasing arrangement before operating a multidrop network.

Place the supply-decoupling capacitor immediately adjacent to the transceiver's supply and ground pins, and provide a low-impedance ground return for both logic and bus-current paths. The stated 3.0 V to 5.5 V range covers 3.3 V and 5 V systems, but the system's steady-state and transient voltages must remain inside that range. Validate the design with the manufacturer's recommended capacitor values and switching conditions.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance is indicated for ADM3064EARZ in the component listing. The IEC 60000-4-2 ±12 kV figure is an ESD-protection specification, not an AEC-Q100 qualification.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADM3064EARZ datasheet ADM3064EARZ pinout ADM3064EARZ datasheet pdf ADM3064EARZ equivalent ADM3064EARZ replacement ADM3064EARZ cross reference ADM3064EARZ vs ADM3064EBRZ ADM3064EARZ SOIC-14 RS-485 ADM3064EARZ 500 kbps 12 kV Analog Devices ADM3064EARZ ADM3064EARZ industrial RS-485 ADM3064EARZ price ADM3064EARZ stock ADM3064EARZ evaluation board

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADM3064EARZ ADM3064E ADM3064EBRZ ADM3061EARZ ADM3062EARZ ADM3063EARZ ADM3064ERUZ RS-485 transceiver bus-line transceiver interface IC semiconductor differential line driver differential receiver EIA-485 500 kbps 50 Mbps 3.0 V to 5.5 V ±12 kV IEC ESD protection 14-lead SOIC surface-mount technology industrial automation building control network data acquisition common-mode noise
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ