Infineon

ADM6996A2T1 - 10/100 Ethernet Switch Controller | Infineon

MPN: ADM6996A2T1 ✓ چالاک
128-BFQFP Package
MOQ: 1 |

ADM6996A2T1 گشتی

The Infineon ADM6996A2T1 is a 10/100 Base-T/TX Ethernet switch controller with a parallel interface, packaged in a 128-BFQFP package. It integrates Ethernet switching and physical-layer interface functions for systems requiring 100 Mbps networking, providing a single-device solution for embedded Ethernet connections.

An Ethernet switch controller is an interface IC that manages data traffic between a host processor and physical Ethernet ports. The ADM6996A2T1 belongs to the broader hierarchy of Ethernet controllers, network interface controllers, interface ICs, and semiconductors. Its parallel interface connects the switching functions to a digital host, while its 10/100 Base-T/TX capability supports Fast Ethernet equipment.

The principal identified features are 10/100 Base-T/TX operation, a parallel processor interface, and a 128-BFQFP package. This combination is useful when a system needs an Ethernet interface close to the host logic without relying on an external plug-in module. The unified controller reduces the number of separate network-interface devices required in compact networking equipment.

Technically, the part combines Ethernet switch control and physical-layer interface functionality in one integrated device. The parallel interface provides a direct digital connection to processors, FPGAs, or other embedded controllers, avoiding the serial interface commonly associated with network-on-chip solutions. Its 128-pin quad flat package provides the mixed-signal, power, ground, and digital I/O connections expected in a high-pin-count networking controller.

Typical applications include industrial Ethernet equipment, embedded routers, network interface controllers, factory automation systems, and legacy Fast Ethernet infrastructure. The parallel interface may be especially useful in industrial designs where a processor or FPGA already handles packet processing and only requires a dedicated Ethernet front end.

Designers should assign power, ground, analog Ethernet, clock, management, and parallel data signals according to the manufacturer pin-description table. Because the package exposes 128 connections, careful plane partitioning, solid grounding, and controlled routing around high-speed digital interfaces are essential. Confirm that host logic and the PCB land pattern match the exact ADM6996A2T1 configuration before layout release.

This page organizes the known device identity, package information, sourcing guidance, same-package alternatives, and engineering-selection considerations. It also identifies where detailed electrical limits, clock requirements, register definitions, and absolute-maximum ratings must be confirmed in the manufacturer datasheet before a production design is approved.

جێگرەوەکانی جێگۆڕکێ بۆ ADM6996A2T1 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

ADM6996HX-AD-T-1

✅ جێگرەوەی ڕاستەوخۆ
📦 128-BFQFP
No measurable differences were reported in the primary compared parameters; both are ADM6996-series 10/100 devices in 128-BFQFP packages.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM6996FCX-AC-T-1

✅ جێگرەوەی ڕاستەوخۆ
📦 128-BFQFP
Same 128-BFQFP package and 10/100 Ethernet category; the comparison describes FCX as a high-performance networking variant, with no quantified primary-parameter delta available.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM6996LCX-AD-R-1

✅ جێگرەوەی ڕاستەوخۆ
📦 128-BFQFP
Same 128-BFQFP package and parallel-interface ADM6996 family; the alternative is listed as obsolete while the target has a current distributor listing, a lifecycle-status difference.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM6992X-AD-T-1

✅ جێگرەوەی ڕاستەوخۆ
📦 128-BFQFP
Same 128-BFQFP package and parallel Ethernet interface; ADM6992 is identified as a fiber-to-Fast-Ethernet converter rather than the target switch-controller configuration.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM6996A2T1 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Type Ethernet switch controller
Ethernet Support 10/100 Base-T/TX
Maximum Nominal Ethernet Rate 100 Mbps
Host Interface Parallel interface
Integrated Functions Ethernet switch and Base-T/TX PHY
پاکێج 128-BFQFP
ژمارەی پین 128 pins
جۆری دامەزراندن Surface mount
Media Interface 10/100 Base-T/TX

ڕێنمایی ڕێکخستنی پینی ADM6996A2T1 128-bfqfp

ڕێکخستنی پین بۆ ADM6996A2T1 (پاکێجی 128-bfqfp). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 128-bfqfp بۆ ADM6996A2T1

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM6996A2T1.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADM6996A2T1 گونجاوە بۆ 6 بەکارھێنانs: Industrial Fast Ethernet Gateway, Embedded Router Control, FPGA-Based Network Interface, Factory Automation Terminal, Legacy Network Interface Card, Networked Sensor and Monitoring Hub.

🏭

Industrial Fast Ethernet Gateway

The ADM6996A2T1 fits an industrial Fast Ethernet gateway because it combines a 10/100 Base-T/TX switch controller and PHY function with a parallel host interface. A processor can use that parallel connection for packet transfer and control while the Infineon device handles the Ethernet-facing functions. The 128-BFQFP package provides the numerous mixed-signal and digital connections needed by this application. Before release, verify the exact port configuration, clock source, supported operating temperature, and isolation requirements for the industrial installation. The device is suitable for legacy 100 Mbps plant-network equipment, but it should not be assumed to support Gigabit Ethernet or modern automotive qualification without confirmation from the manufacturer documentation.

🌐

Embedded Router Control

The ADM6996A2T1 can provide the 10/100 Base-T/TX network front end for an embedded router whose main processor uses parallel data and control signals. Integrating the switch controller and PHY into one 128-BFQFP device reduces the need for separate Ethernet interface components. This arrangement is useful for compact networking equipment that requires 100 Mbps rather than gigabit throughput. The parallel interface must be matched carefully to the processor bus timing, and the PCB should provide continuous ground and well-controlled power distribution around the high-pin-count device. Because the controller configuration and electrical operating limits are defined by the manufacturer documentation, those tables should govern clock, reset, and power-supply implementation.

🖥️

FPGA-Based Network Interface

The ADM6996A2T1 is suitable for an FPGA-based network interface when the FPGA implements packet processing, buffering, or protocol logic and the physical Ethernet front end is assigned to a dedicated controller. The device's parallel interface provides a direct digital path between the two devices, while its 10/100 Base-T/TX function supports standard Fast Ethernet links. Pin assignment, bus timing, clocking, and interrupt behavior must be verified against both the Infineon datasheet and the FPGA interface design. The 128-BFQFP package also requires careful escape routing because numerous high-speed and supply connections must leave the device without introducing excessive board area or signal discontinuity.

🏭

Factory Automation Terminal

The ADM6996A2T1 can support a factory automation terminal that connects a local controller to a 10/100 Base-T/TX network. Its integrated switch-controller and PHY functions provide the Ethernet-facing electronics, while the parallel interface permits integration with digital control logic without requiring a serial Ethernet interface. This is particularly relevant to legacy production equipment that remains limited to 100 Mbps. The implementation should include the interface and decoupling arrangements specified by the manufacturer and should verify environmental requirements at the product level rather than assuming that the IC alone satisfies isolation, surge, or enclosure requirements. EMC and thermal testing remain necessary at the completed equipment level.

🔧

Legacy Network Interface Card

The ADM6996A2T1 is applicable to a legacy 10/100 network interface card or embedded communication board that uses parallel logic rather than a compact serial network interface. The 128-BFQFP package exposes the required power, control, data, and Ethernet connections, allowing the controller and PHY functions to be placed on a multilayer PCB. Such designs are common when maintaining or reproducing equipment built around mature Fast Ethernet architectures. Before schematic capture, engineers must confirm the precise signal map, reference clock, reset requirements, and transceiver or magnetics interface from the manufacturer documentation. The board should also separate high-speed digital routing from sensitive Ethernet analog paths and maintain uninterrupted return paths beneath the device.

🧩

Networked Sensor and Monitoring Hub

The ADM6996A2T1 can form part of a networked monitoring hub that connects sensors or test channels through a 10/100 Base-T/TX link. A local processor can receive and process data through the parallel interface while the Infineon controller provides the Ethernet-facing switch and PHY functions. The architecture is appropriate where established 100 Mbps infrastructure is available but gigabit bandwidth is unnecessary. Designers should calculate timing margins for the parallel data path, follow the reference clock and reset requirements in the manufacturer datasheet, and preserve clean power and ground distribution around all 128 package contacts. Regulatory and environmental suitability for the final monitoring product must be established independently of the component-level feature set.

کورتەی بەرهەمە پێشنیارکراوەکان

KSZ8895RQXI-TR Microchip Technology بەکارهێنراوە لە: Industrial Fast Ethernet Gateway KSZ8895RQXC-TR Microchip Technology بەکارهێنراوە لە: Industrial Fast Ethernet Gateway, Factory Automation Terminal KSZ8061RNBW-TR Microchip Technology بەکارهێنراوە لە: Industrial Fast Ethernet Gateway, Legacy Network Interface Card KSZ8895FMQITR Microchip Technology بەکارهێنراوە لە: Embedded Router Control KSZ8895MLUB-TR Microchip Technology بەکارهێنراوە لە: Embedded Router Control KSZ8567STXI-TR Microchip Technology بەکارهێنراوە لە: Embedded Router Control XC7A35T-1CSG324I Artix-7 FPGA host for parallel packet-processing logic بەکارهێنراوە لە: FPGA-Based Network Interface XC7A25T-1CSG324C Lower-complexity FPGA host option بەکارهێنراوە لە: FPGA-Based Network Interface XC7A100T-1CSG324C AMD بەکارهێنراوە لە: FPGA-Based Network Interface KSZ8061RNXI-TR Copper Ethernet transceiver option بەکارهێنراوە لە: Factory Automation Terminal XC7A25T-2CSG324C Programmable control-logic host بەکارهێنراوە لە: Factory Automation Terminal KSZ8841MLLI-TR Ethernet interface option for embedded boards بەکارهێنراوە لە: Legacy Network Interface Card KSZ8851SNLI-TR Microchip Technology بەکارهێنراوە لە: Legacy Network Interface Card KSZ8842-PMBL-TR Microchip Technology بەکارهێنراوە لە: Networked Sensor and Monitoring Hub KSZ8563RNXI-TR Microchip Technology بەکارهێنراوە لە: Networked Sensor and Monitoring Hub ADS1131IDR Texas Instruments بەکارهێنراوە لە: Networked Sensor and Monitoring Hub
What is the ADM6996A2T1?
The Infineon ADM6996A2T1 is an Ethernet switch controller supporting 10/100 Base-T/TX networking through a parallel host interface. According to the manufacturer datasheet, it combines an Ethernet switch controller and Base-T/TX PHY function in a 128-BFQFP package. It is intended for embedded Fast Ethernet equipment requiring a parallel connection to a host processor or other digital controller.
What Ethernet speed does ADM6996A2T1 support?
The ADM6996A2T1 supports 10/100 Base-T/TX operation, corresponding to 10 Mbps or 100 Mbps Ethernet operation. The manufacturer datasheet identifies the device as a 10/100 Ethernet switch controller. It is therefore positioned for Fast Ethernet systems rather than Gigabit Ethernet designs, where a controller with 1000 Base-T support would be required.
What interface does ADM6996A2T1 use to connect to a processor?
The ADM6996A2T1 uses a parallel interface to connect to a host processor, FPGA, or embedded controller. According to the manufacturer datasheet, the parallel interface is a defining feature of this Ethernet switch controller. The host must support the required data, address, control, and clock signals shown in the pin-description and interface tables.
What package does ADM6996A2T1 use?
The ADM6996A2T1 is supplied in a 128-BFQFP surface-mount package. The manufacturer datasheet and distributor records identify the package as PG-BFQFP-128, also described as 128-BFQFP. Because the device has 128 physical connections and combines digital, analog, power, and ground functions, its land pattern must match the exact package drawing before PCB release.
Where can I download the ADM6996A2T1 datasheet PDF?
The ADM6996A2T1 datasheet PDF is available through the product data link on this page, which points to the 128-BFQFP device documentation. Use the manufacturer's pin-description table, electrical-characteristics tables, interface timing diagrams, and application circuit before assigning pins or calculating design margins. Detailed operating voltage and absolute-maximum limits should be taken directly from that document.
Where is the ADM6996A2T1 pinout located?
The ADM6996A2T1 pinout is located in the pin-description table and package drawing in the manufacturer datasheet. The device uses a 128-BFQFP package, so the pin-assignment table must be read together with the exposed-pad, power, ground, and pin-1 orientation information. Use those entries when creating the schematic symbol and PCB footprint.
Can ADM6996A2T1 be used in an industrial Ethernet controller?
The ADM6996A2T1 can be used in an industrial Ethernet controller when the system requires 10/100 Base-T/TX and a parallel host interface. Its switch-controller and integrated PHY functions are relevant to embedded routers, factory automation equipment, and legacy Fast Ethernet gateways. Industrial qualification, temperature range, isolation, and surge requirements must be checked separately for each deployment.
Where can I buy ADM6996A2T1 and check its lead time?
Use the Request a Quote form on this page to request ADM6996A2T1 supply, current availability, and lead time. The form is the appropriate route for quote-based sourcing and can capture the required quantity, target date, and package suffix. Current commercial terms should be confirmed at the time of quotation because availability can change independently of the device documentation.
What is the price of ADM6996A2T1?
Current ADM6996A2T1 pricing should be obtained through the Request a Quote form on this page. The form allows buyers to request the exact ADM6996A2T1 MPN and quantity for a current commercial response. Historical distributor pricing may not reflect present inventory, lifecycle allocation, or the required delivery schedule.
Is ADM6996A2T1 in stock?
Stock status for ADM6996A2T1 should be confirmed through the Request a Quote form on this page. Because availability can vary by quantity and delivery date, a current inventory response is more useful than a generic stock statement. Include your required order quantity and target receiving date when submitting the request.
What can replace ADM6996A2T1?
ADM6996HX-AD-T-1 is the closest documented same-brand alternative because a component comparison reports no measurable differences in the primary technical parameters. It also uses the ADM6996 series and 128-BFQFP package. Final replacement approval still requires verification of pin assignments, electrical limits, clocking, firmware or register compatibility, and lifecycle conditions.
What is the best Infineon equivalent for ADM6996A2T1?
ADM6996HX-AD-T-1 is the leading Infineon candidate in the available cross-reference information because it shares the ADM6996 series and 128-BFQFP package and is reported as functionally equivalent across the compared primary parameters. The comparison does not by itself prove every pin and timing requirement matches. Review the manufacturer datasheets before using it as a drop-in substitute.
ADM6996A2T1 vs ADM6996HX-AD-T-1: which is better?
ADM6996A2T1 and ADM6996HX-AD-T-1 are reported to have identical performance profiles across the primary compared parameters, and both belong to the ADM6996 family in a 128-BFQFP package. ADM6996A2T1 is the practical choice when its documented configuration and lifecycle terms fit the new design. Use ADM6996HX-AD-T-1 only after confirming electrical, pin, timing, and interface compatibility.
When should I choose ADM6996A2T1 over ADM6996FCX-AC-T-1?
Choose ADM6996A2T1 when the design specifically targets its documented 10/100 Base-T/TX switch-controller configuration and parallel interface in a 128-BFQFP package. ADM6996FCX-AC-T-1 is described as a related high-performance networking component, but the comparison does not establish identical register behavior or every electrical characteristic. Use the former when it matches the target legacy Fast Ethernet design.
What are the key specifications of ADM6996A2T1 that engineers should know?
The ADM6996A2T1 is an Infineon Ethernet switch controller with 10/100 Base-T/TX support, a parallel host interface, and a 128-BFQFP package. These three characteristics define its basic system integration: Fast Ethernet rather than Gigabit Ethernet, a direct digital processor connection, and a high-pin-count surface-mount footprint. Detailed voltage, timing, and environmental limits require the manufacturer datasheet.

داتای سەرچاوەی ئەندازیاری بۆ ADM6996A2T1 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADM6996A2T1 for a legacy or industrial Fast Ethernet design that specifically requires the ADM6996 10/100 switch-controller configuration, a parallel host interface, and a 128-BFQFP footprint. ADM6996HX-AD-T-1 is the closest documented substitute because the available comparison found no measurable difference in the primary parameters, but its lifecycle status still requires procurement review. ADM6996FCX-AC-T-1 may suit a related 10/100 networking implementation, although the available comparison does not quantify every electrical or register-level difference. ADM6996LCX-AD-R-1 has the same package and parallel interface but is listed as obsolete, so it is mainly relevant to maintenance of matching legacy equipment. ADM6992X-AD-T-1 differs functionally as a fiber-to-Fast-Ethernet converter and should be selected only when that media architecture is required. In every case, validate the exact pin map, electrical limits, timing, and external circuit requirements before declaring a drop-in replacement.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADM6996HX-AD-T-1 ADM6996FCX-AC-T-1 ADM6996LCX-AD-R-1 ADM6992X-AD-T-1
Package 128-BFQFP 128-BFQFP 128-BFQFP 128-BFQFP 128-BFQFP
Brand Infineon Infineon Infineon Infineon Infineon
Product Series ADM6996 ADM6996 ADM6996 ADM6996 ADM6992
Function Ethernet switch controller with Base-T/TX PHY Ethernet switch controller Ethernet switch component Ethernet switch with Base-T/TX PHY Fiber-to-Fast-Ethernet converter
Ethernet Rate 10/100 Base-T/TX 10/100 Base-T/TX 10/100 Base-T/TX 10/100 Base-T/TX Fast Ethernet
Host Interface Parallel Parallel Parallel Parallel Parallel
Protocol Ethernet Ethernet Ethernet Ethernet Ethernet

جیاکەرەوە سەرەکییەکان

  • Closest documented same-package substitute (بەراورد بەADM6996HX-AD-T-1)
  • Direct switch-controller configuration (بەراورد بەADM6992X-AD-T-1)
  • Current listing versus legacy catalog entries (بەراورد بەADM6996LCX-AD-R-1)

تێبینییەکانی دیزاین

Create the 128-BFQFP footprint directly from the manufacturer package drawing and cross-check pin 1, lead pitch, body dimensions, and exposed-pad requirements. Keep the parallel data and control routes short and route them over a continuous ground plane. Because the device combines digital and analog Ethernet functions, separate high-speed digital traffic from sensitive Ethernet signal paths rather than relying only on component placement.

Implement the supply rails, decoupling network, and power sequencing exactly as shown in the manufacturer application information. Place the required high-frequency decoupling capacitors at the associated power pins and provide a low-impedance return path for each connection. Do not infer the operating voltage range from the Ethernet rating; confirm supply limits, absolute-maximum ratings, and power-up behavior in the manufacturer datasheet.

Treat the parallel host interface as a timed bus. Match trace lengths where the interface timing specification requires it, avoid stubs, and use appropriate series termination if recommended by the interface guidance. Route clock and data as a coordinated group, minimize right-angle turns, and provide continuous reference planes. Validate the completed layout with the specified clock, load, and interface timing conditions.

Do not treat a shared package name as proof of complete interchangeability. Before replacing ADM6996A2T1, compare pin names, supply levels, clock requirements, reset behavior, register or control compatibility, media interfaces, and lifecycle status for the exact alternative ordering code. In particular, ADM6996HX-AD-T-1 is reported as equivalent in primary parameters, while ADM6992X-AD-T-1 is identified as a fiber-to-Fast-Ethernet converter and may require different external support circuitry.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were established for this exact MPN. Confirm the applicable declarations with the manufacturer before procurement or production release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-19 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADM6996A2T1 datasheet ADM6996A2T1 pinout ADM6996A2T1 datasheet pdf ADM6996A2T1 specifications ADM6996A2T1 equivalent ADM6996A2T1 replacement ADM6996A2T1 cross reference ADM6996A2T1 price ADM6996A2T1 stock Infineon ADM6996A2T1 ADM6996A2T1 128-BFQFP pinout ADM6996A2T1 parallel Ethernet interface ADM6996A2T1 vs ADM6996HX-AD-T-1 ADM6996A2T1 industrial Ethernet controller ADM6996A2T1 application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Infineon ADM6996A2T1 ADM6996HX-AD-T-1 ADM6996FCX-AC-T-1 ADM6996LCX-AD-R-1 ADM6992X-AD-T-1 Ethernet switch controller Ethernet controller 10/100 Base-T/TX Fast Ethernet parallel interface Base-T/TX PHY 128-BFQFP QFN family surface mount industrial Ethernet embedded router factory automation network interface controller FPGA interface IC semiconductor RoHS REACH AEC-Q100
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ