Texas Instruments

ADS1211P - 24-Bit, 15.6-kSPS Delta-Sigma ADC | TI

MPN: ADS1211P ✓ چالاک
5 V Vdss 24-pin PDIP Package
MOQ: 1 |

ADS1211P گشتی

Texas Instruments ADS1211P is a precision, 24-bit, delta-sigma analog-to-digital converter with eight channels, a 15.6-kSPS maximum conversion rate, an internal voltage reference, and a programmable gain amplifier in a 24-pin PDIP package. It operates from a single 5 V supply and supports differential inputs for low-level signals and transducers.

A delta-sigma ADC is a data-converter category that uses oversampling, noise shaping, and digital filtering to achieve high resolution and excellent noise performance from relatively low-frequency measurements. Within the broader hierarchy of analog-to-digital converters, the ADS1211P occupies the precision, low-speed measurement segment between basic sampling ADCs and higher-speed SAR converters. Its low conversion rate is especially useful when measuring slowly changing bridge, pressure, temperature, and current signals.

The converter provides 24-bit resolution and reports 23 effective bits at 10 Hz and 20 effective bits at 1000 Hz. Its programmable gain amplifier accommodates low-level differential inputs, while the internal reference reduces the need for an external precision reference. A programmable digital cutoff frequency supports filtering of noise and out-of-band content, and the flexible serial interface is compatible with SPI while also offering a two-wire control mode.

Its architecture is designed for precision measurement rather than waveform capture. The 15.6-kSPS conversion rate, high-resolution output, differential input arrangement, internal voltage reference, and programmable filtering work together to improve the signal-to-noise ratio of low-frequency measurements. Four analog inputs are identified in the product listing, while the manufacturer describes the ADS1211 family as an eight-channel converter.

Typical applications include industrial process measurement, load-cell and strain-gauge sensing, pressure and temperature instrumentation, portable measurement equipment, and low-level sensor acquisition. Differential excitation and measurement help reject common-mode noise when sensors and electronics share a grounded industrial environment.

Design the analog input network to minimize thermal noise and keep routed traces away from switching converters and high-current digital return paths. Use the manufacturer pin-description table and serial-interface timing specifications when assigning connector and PCB nets. Confirm the selected gain, data rate, and digital cutoff setting against the required settling time before sampling rapidly changing signals.

This page combines the device specifications, package details, application guidance, design cautions, and documented drop-in replacement analysis. The replacement list is intentionally limited to verified same-footprint choices because electrically similar converters in different packages cannot be soldered directly onto the ADS1211P footprint.

جێگرەوەکانی جێگۆڕکێ بۆ ADS1211P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS1211P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Programmable Gain Amplifier, Supply Voltage, Mounting Type, Input Architecture.

Texas Instruments
Package: 18-pin PDIP (through-hole)
Programmable Gain Amplifier: 1 to 128
بەراوردکردن لەگەڵ ADS1211P →
Texas Instruments
Programmable Gain Amplifier: 1, 2, 4, 8, 16
Supply Voltage: +5 V single supply
بەراوردکردن لەگەڵ ADS1211P →
Texas Instruments
Package: 24-pin SOIC
Supply Voltage: Single 5 V
Mounting Type: Surface mount
بەراوردکردن لەگەڵ ADS1211P →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ADS1211P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

ADC Resolution 24 bit
Maximum Conversion Rate 15.6 kSPS
Converter Architecture Delta-sigma
Number of Channels 8 channels
Analog Input Count 4 inputs
Input Architecture Differential
ڤۆڵتیەی دابینکردن 5 V
Effective Resolution at 10 Hz 23 bits
Effective Resolution at 1000 Hz 20 bits
Programmable Gain Amplifier Yes
Internal Voltage Reference Yes, VREF
Digital Filter Cutoff Programmable
Serial Interface SPI-compatible synchronous serial interface with 2-wire mode
پاکێج 24-pin PDIP
Temperature Grade Industrial
جۆری دامەزراندن Through-hole

ڕێنمایی ڕێکخستنی پینی ADS1211P 24-pin pdip

ڕێکخستنی پین بۆ ADS1211P (پاکێجی 24-pin pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 24-pin pdip بۆ ADS1211P

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS1211P.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS1211P گونجاوە بۆ 6 بەکارھێنانs: Industrial Pressure Transducer Acquisition, Load Cell and Strain Gauge Measurement, Precision Temperature Instrumentation, Battery-Powered Portable Metering, Process Control and Data Acquisition, Low-Noise Sensor Signal Conditioning.

🏭

Industrial Pressure Transducer Acquisition

The ADS1211P fits low-speed pressure transmitters that produce small differential voltages and require more resolution than a conventional 12-bit or 16-bit converter can provide. Its 24-bit delta-sigma conversion, programmable gain amplifier, and differential input structure allow the sensor signal to be amplified before digitization. According to the Texas Instruments product page, the converter operates from a single 5 V supply and supports a maximum rate of 15.6 kSPS, which is suitable for continuously updated process pressure rather than high-bandwidth waveform capture. Use the programmable cutoff frequency to reject process noise, and confirm that the transducer excitation, common-mode voltage, and selected gain remain inside the device input limits.

⚖️

Load Cell and Strain Gauge Measurement

The ADS1211P is appropriate for load-cell and strain-gauge front ends because bridge sensors generate small differential signals and require careful gain and noise control. Its programmable gain amplifier increases the useful signal before conversion, while the 24-bit delta-sigma core supports detailed force, weight, or displacement measurement. According to the Texas Instruments ADS1211 product information, effective resolution reaches 23 bits at 10 Hz, making low-rate measurements particularly favorable for stable mechanical loads. The design should use shielded differential routing, a stable bridge excitation, and a cutoff frequency selected for the required measurement bandwidth and settling behavior.

🌡️

Precision Temperature Instrumentation

The ADS1211P can support temperature measurement systems using resistive, thermocouple, or ratiometric sensors when the design prioritizes resolution and stable conversion over rapid sampling. Its differential inputs help reject common-mode voltage, the programmable gain amplifier accommodates small sensor outputs, and the internal voltage reference simplifies the measurement chain. According to the Texas Instruments product page, the converter delivers 24-bit nominal resolution and supports programmable filtering. Select the gain and data rate around the sensor's thermal time constant, and avoid placing converter return-current paths through sensitive measurement nodes to prevent self-heating errors from appearing as temperature drift.

🔋

Battery-Powered Portable Metering

The ADS1211P fits portable battery-powered meters that periodically measure low-energy sensors and need higher resolution than the power budget permits for a fast SAR converter. Its 15.6-kSPS maximum rate allows conversion timing to be aligned with the measurement cycle, while the delta-sigma filter can narrow the noise bandwidth without requiring excessive conversion speed. According to the Texas Instruments product page, the part operates from a single 5 V supply and includes an internal voltage reference and programmable gain. Power-system design should control analog supply current, wake the converter only when required, and account for regulator efficiency and reference behavior across the battery-voltage range.

📊

Process Control and Data Acquisition

The ADS1211P is useful in slow process-control and data-acquisition systems where multiple low-level signals must be converted with consistent scaling. Its eight-channel family architecture, differential inputs, programmable gain, internal voltage reference, and programmable cutoff frequency provide a flexible measurement front end. According to the Texas Instruments product page, the maximum conversion rate is 15.6 kSPS and the nominal resolution is 24 bits, making the converter appropriate for pressure, flow, level, and temperature signals rather than high-frequency diagnostics. Keep analog traces short, isolate switching regulators and relay paths, and define calibration procedures that account for the selected gain, reference, and filter settings.

📈

Low-Noise Sensor Signal Conditioning

The ADS1211P supports sensor-signal conditioning chains where a small differential output must be amplified, filtered, and converted without introducing excessive quantization error. Its programmable gain amplifier brings the signal closer to the converter's input range, while the programmable cutoff frequency rejects high-frequency noise before digital processing. According to the Texas Instruments ADS1211 manufacturer information, the 24-bit delta-sigma architecture achieves 23 effective bits at 10 Hz and 20 effective bits at 1000 Hz. Choose a data rate that satisfies the required settling time, verify input-referred noise for the selected gain, and route analog grounds using a return path that does not share switching currents with the sensed signal.

What are the key specifications of ADS1211P that engineers should know?
The ADS1211P is a 24-bit, 15.6-kSPS precision delta-sigma ADC with differential inputs, a programmable gain amplifier, an internal voltage reference, and a programmable cutoff frequency. According to the Texas Instruments ADS1211 product page and manufacturer datasheet, the converter also provides a flexible synchronous serial interface compatible with SPI and includes a two-wire control mode. It operates from a single 5 V supply and is offered in the ADS1211P 24-pin PDIP configuration.
What is ADS1211P used for?
The ADS1211P is used for precise low-level analog measurements that do not require high-speed waveform acquisition. According to the Texas Instruments product page, its 24-bit delta-sigma architecture, differential inputs, programmable gain amplifier, internal VREF, and programmable cutoff frequency suit transducers, sensors, and industrial measurement systems. The 15.6-kSPS maximum rate is particularly appropriate for pressure, temperature, load-cell, strain, and slowly changing process-control signals.
What is the resolution and sample rate of ADS1211P?
The ADS1211P provides 24-bit resolution with a maximum conversion rate of 15.6 kSPS. According to the Texas Instruments product page, its effective resolution is 23 bits at 10 Hz and 20 bits at 1000 Hz. These figures show that the converter maintains substantial usable resolution at higher data rates, although the lowest-rate operating point delivers the highest listed effective resolution for precision measurements.
Where can I download the ADS1211P datasheet PDF?
The official ADS1211P documentation is available through the Texas Instruments product page linked on this page, which provides the manufacturer datasheet and ordering information. According to Texas Instruments, the ADS1211 family documentation describes the 24-bit converter, differential input channels, gain settings, digital filter, serial interface, and electrical characteristics. Use the pin-description table and timing diagrams from that manufacturer datasheet when assigning the 24-pin PDIP footprint.
Where can I find the ADS1211P pinout?
The ADS1211P pinout is documented in the Texas Instruments ADS1211 manufacturer datasheet, specifically in the pin-description and connection diagrams. The device is identified as a 24-pin PDIP package. Before assigning PCB nets, verify each signal name, analog-supply requirement, ground connection, and serial-interface function against that diagram because the DIP footprint has 24 numbered terminals and no exposed pad.
Can ADS1211P measure low-level differential sensor signals?
Yes, the ADS1211P is designed for low-level differential measurements because it combines differential inputs with a programmable gain amplifier and high-resolution delta-sigma conversion. According to the Texas Instruments product page and manufacturer datasheet, the gain stage can increase the measurement signal relative to the converter noise floor, while the internal reference supports consistent conversion scaling. Sensor excitation, common-mode voltage, and input range must still be checked against the chosen gain configuration.
Where can I buy ADS1211P online?
The ADS1211P can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate route for current commercial availability, MOQ, and lead-time confirmation without relying on a static quotation. The part is identified as a Texas Instruments 24-bit, four-input, 15.6-kSPS delta-sigma ADC in a 24-pin PDIP package, so the requested MPN and package suffix should be stated clearly.
What is the price of ADS1211P?
Current ADS1211P commercial pricing should be obtained through the Request a Quote form on this XAIPART page. The form supports confirmation by quantity and package configuration for the exact ADS1211P ordering code. The device is a 24-bit, 15.6-kSPS delta-sigma ADC in a 24-pin PDIP package, making the exact suffix important when requesting a quotation for production quantities or prototyping.
What is the lead time for ADS1211P?
The current ADS1211P lead time should be confirmed through the Request a Quote form on this XAIPART page using the required production quantity. Lead time can vary with order volume, inventory, and purchasing conditions, so a quantity-specific response is more useful than a generic availability statement. The component is a 24-bit, 15.6-kSPS precision ADC in a 24-pin PDIP package, so no alternative package suffix should be substituted during procurement.
Is ADS1211P in stock?
ADS1211P inventory status should be checked through the Request a Quote form on this XAIPART page. A stock confirmation should specify the exact quantity, 24-pin PDIP package, and target shipment date. The part is identified as an active Texas Instruments 24-bit delta-sigma ADC, but current inventory and delivery scheduling remain commercial details that should be confirmed for each order.
What can replace ADS1211P?
The ADS1211P requires a replacement with the same 24-pin PDIP footprint, compatible pin functions, compatible supply requirements, and closely matched converter performance. According to the Texas Instruments ADS1211 product page, the ADS1211 and ADS1210 are not full pin-compatible drop-ins because the ADS1210 is single-channel and uses an 18-pin package. Consequently, ADS1210P cannot replace ADS1211P on the same PCB without redesign.
Is ADS1211P the same as ADS1210P?
No, ADS1211P and ADS1210P are not direct drop-in equivalents. The ADS1211P is a 24-bit, eight-channel family device in a 24-pin PDIP package, whereas the ADS1210 is a single-channel converter offered in 18-pin DIP and SOIC packages. According to the Texas Instruments ADS1211 product information, their interfaces and channel arrangements differ, so ADS1210P cannot be installed on an ADS1211P footprint without changing the board.
When should I choose ADS1211P over a lower-channel ADC?
Choose ADS1211P when a design requires a high-resolution delta-sigma measurement path with differential inputs, programmable gain, internal voltage reference, and serial digital filtering. According to the Texas Instruments product page, it supports up to 15.6 kSPS and multiple measurement channels. A lower-channel ADC may be adequate for simpler unipolar measurements, but ADS1211P is preferable when input conditioning, reference stability, and rejection of out-of-band noise are central to the design.
Is ADS1211P suitable for industrial sensor acquisition?
The ADS1211P is suitable for industrial sensor acquisition when the measured signals are low frequency and precision matters more than waveform bandwidth. According to the Texas Instruments product page, the device offers differential inputs, programmable gain, an internal VREF, and a programmable cutoff frequency. Its 15.6-kSPS rate suits bridge sensors and slow process signals, while careful grounding, input filtering, and isolation design remain necessary in electrically noisy installations.
What is the best Texas Instruments equivalent for ADS1211P?
No verified 24-pin PDIP drop-in equivalent to the ADS1211P was established from the documented replacement search. The closest family comparison is the ADS1210, but the Texas Instruments product information identifies the ADS1210 as a single-channel, 18-pin-device option rather than a pin-compatible ADS1211P replacement. For a same-PCB substitution, engineers should require the same 24-pin PDIP pinout and verify converter, reference, interface, and performance compatibility before approval.
What is the best cross-brand equivalent for ADS1211P?
No cross-brand drop-in equivalent for the ADS1211P was verified. A valid replacement would need the same 24-pin PDIP footprint, compatible differential input and gain architecture, equivalent reference capability, and a compatible serial interface, not merely a similar nominal resolution or sample rate. The cross-reference results did not establish such a part. Use the Request a Quote form when procurement needs an exact-source alternative request, and require schematic and pin-level review before substitution.

داتای سەرچاوەی ئەندازیاری بۆ ADS1211P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADS1211P when the design needs a 24-bit, low-speed measurement path with differential inputs, programmable gain, an internal voltage reference, programmable filtering, and a SPI-compatible serial interface. Its 15.6-kSPS maximum rate is appropriate for pressure, temperature, load-cell, strain, and industrial process signals rather than high-frequency waveform capture. The 24-pin PDIP package also favors prototypes and through-hole industrial assemblies where a surface-mount ADC would require different layout practices. No documented drop-in replacement was established because the closest family member, ADS1210, uses an 18-pin package and has a different channel arrangement. If a same-PCB substitution is mandatory, require a verified 24-pin PDIP pinout plus compatible gain, reference, input-range, filtering, and serial-interface behavior. Otherwise, choose an alternative package or redesign the PCB rather than accepting a functionally similar but physically incompatible converter.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Package 24-pin PDIP
Brand Texas Instruments
ADC Resolution 24 bit
Maximum Conversion Rate 15.6 kSPS
Converter Architecture Delta-sigma
Input Architecture Differential
Programmable Gain Amplifier Yes
Internal Voltage Reference Yes, VREF
Serial Interface SPI-compatible synchronous serial interface with 2-wire mode
Supply Voltage 5 V

تێبینییەکانی دیزاین

Route the differential input pair as a compact, balanced pair and connect it to the converter through the application-specific input network described in the manufacturer datasheet. Keep the analog return path independent from switching-regulator and digital return currents. Place input filtering components close to the ADS1211P pins so that unwanted high-frequency energy is attenuated before it reaches the amplifier and converter. Confirm the PCB land pattern against the 24-pin PDIP drawing rather than relying on a generic DIP footprint.

Select the conversion rate, gain, and digital cutoff frequency together rather than optimizing them independently. According to the Texas Instruments ADS1211 product information, effective resolution is 23 bits at 10 Hz and 20 bits at 1000 Hz, so a higher data rate can reduce usable resolution while increasing responsiveness. For slowly changing sensors, choose a bandwidth that rejects noise without delaying the required settling. Validate the complete filter response in firmware because digital settling can affect the time before the final sample is valid.

Power the ADS1211P from a low-noise 5 V source and decouple its supply pins close to the package according to the manufacturer layout guidance. The converter's internal reference supports repeatable conversion, but measurement accuracy still depends on clean supply voltage and suitable grounding. If the 5 V rail is generated by a switching converter, evaluate its ripple at the ADC input and consider filtering or a separate low-noise regulator stage. Avoid sharing high-current return paths between the converter and sensitive transducer circuitry.

Do not substitute ADS1210P for ADS1211P on an existing board. The Texas Instruments product page identifies the ADS1210 as a single-channel device offered in 18-pin packages, while ADS1211P is a 24-pin PDIP part with a different channel arrangement. Also do not assume that a 24-bit nominal result guarantees 24 effective bits at every data rate. Use the effective-resolution figures, selected gain, filter bandwidth, and settling time to determine the usable accuracy of the measurement.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The ADS1211 is a precision analog-to-digital converter rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS1211P datasheet ADS1211P datasheet pdf ADS1211P pinout ADS1211P specifications Texas Instruments ADS1211P ADS1211P 24-PDIP ADS1211P application circuit ADS1211P pressure sensor ADC ADS1211P load cell amplifier ADS1211P replacement ADS1211P equivalent ADS1211P drop-in alternative ADS1211P price ADS1211P stock ADS1211P lead time

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS1211P ADS1211 ADS1210P delta-sigma ADC analog-to-digital converter precision data converter 24-bit resolution 15.6 kSPS differential input programmable gain amplifier internal voltage reference VREF programmable cutoff frequency SPI-compatible interface two-wire control mode 24-pin PDIP through-hole package industrial instrumentation pressure measurement load-cell measurement sensor signal conditioning process control effective resolution Texas Instruments ADS1211 product page
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ